Natural Silkworm Silk Research Articles

Versatile ionic liquid gels formed by dynamic covalent bonding and microphase separated structures.

It is challenging for ionic liquid gels to achieve the combination of rapid self-healing with high toughness. Here, ionic liquid gels (DI-PR) were prepared from readily available materials. A dynamic covalently bonded oxime-carbamate was prepared from polycaprolactone diol, isophorone diisocyanate and dimethylethyleneglyoxime, followed by addition of the "rigid-flexible" cross-linking agent rutin to chemically cross-link the polymer chains and afford the ionic liquid gels, DI-PR. The tensile strength, elongation at break and toughness of the DI-PR gels were as high as 16.5 MPa, 1132.6%, and 52.6 MJ m-3, respectively. The toughness is similar to that of natural silkworm silk (70 MJ m-3) and wool (60 MJ m-3). After stretching, the DI-PR can rebound within 1 s, their room temperature self-healing rate is as high as 92%, they remain functional over the temperature range -50 °C to 140 °C and the interface with a steel plate has an adhesion toughness of >2000 J m-2. These properties mean that the DI-PR gels are particularly suitable for use as anticorrosion coatings for submarine and underground gas and oil pipelines. The use of rutin, which combines rigid quercetin-based structural units with flexible glycoside-based structural units, as a cross-linking agent, provides a new method for improving the toughness of soft materials through its synergistic interaction with hard and soft chain fragments of polyurethanes.

Biomimetic Natural Silk Nanofibrous Microspheres for Multifunctional Biomedical Applications.

Silk nanofibrils (SNFs) extracted from natural silkworm silk represent a class of high-potential protein nanofiber material with unexplored biomedical applications. In this study, a SNF-assembled microsphere with extracellular matrix (ECM)-mimicking architecture and high specific surface area was developed. The SNFs were exfoliated from silkworm silks through an all-aqueous process and used as the building blocks for constructing the microspheres. Inspired by the structure and bioactive composition of ECM, hyaluronic acid (HA) was used as a bio-glue to regulate SNF assembly. With the assistance of HA, the SNF microspheres with stable fluffy nanofibrous structures were synthesized through electrospray. The biomimetic structure and nature derived composition endow the microspheres with excellent biocompatibility and enhanced osteogenic differentiation-inducing ability to mesenchymal stem cells. As proof of versatility, the SNF microspheres were further functionalized with other molecules and nanomaterials. Taking the advantages of the excellent blood compatibility and modifiability from the molecular level to the nanoscale of SNF microspheres, we demonstrated their versatile applications in protease detection and blood purification. On the basis of these results, we foresee that this natural silk-based nanofibrous microsphere may serve as a superior biomedical material for tissue engineering, early disease diagnosis, and therapeutic devices.

Preparation and properties of photochromic regenerated silk fibroin/Tungsten trioxide nanoparticles hybrid fibers

Natural silkworm silk is traditional high-grade textile material. However, functional types of silkworm silk are scarce, such as photochromic silk. Because Tungsten trioxide nanoparticle (WO3 NPs) is a good typical photochromic material, it may be a potential material to produce photochromic fabrics. In this research，a series of photochromic hybrid fibers composed of regenerated silk fibroin (RSF) and WO3 NPs with different mass ratios have been prepared by wet spinning, which endowed the hybrid fibers with enhanced mechanical properties and excellent photochromic properties. Among the hybrid fibers, 4 wt%-RSF/WO3 NPs hybrid fibers had the highest breaking stress and breaking strain, which reached to 214.52 ± 16.00 MPa and 97.82 ± 17.50%. Tensile test of the hybrid fibers showed that the toughness was improved and the breaking energy reached 129.14 ± 25.56 MJ/m3. The experimental results indicated the hybrid fibers color changed rapidly change and reached their maximum within 5 s under the ultraviolet light and 1 min under the sunlight. The hybrid fibers still retained good photochromic ability after more than 20 repeated tests. It can be seen from above that the RSF/WO3 NPs photochromic hybrid fibers may have great potential in photochromic fabrics and military camouflage.

Colorless Silk/Copper Sulfide Hybrid Fiber and Fabric with Spontaneous Heating Property under Sunlight.

With the increasing demand for comfort, thinness, and warmth of fabrics, various functional fibers have emerged. However, natural silkworm silk, as one of the most widely used natural fibers in textile, faces the issue that it cannot be modified during the spinning process like synthetic fibers. Herein, copper sulfide nanoparticles (CuS NPs) with a near-infrared (NIR) absorption property were first prepared by using regenerated silk fibroin (RSF) as the biological template. Then, trace CuS NPs prepared in RSF solution (no more than 100 ppm) were added into the RSF spinning dope to prepare colorless RSF/CuS hybrid fibers via wet-spinning process. The tensile test of the RSF/CuS hybrid fibers showed that the toughness was improved with the addition of CuS NPs, which completely met the requirements of textile development. The temperature of RSF/CuS hybrid fiber bundles could increase 18.5 °C within 3 min under 1064 nm laser irradiation with power density of 1.0 W/cm2. Finally, these RSF/CuS hybrid fiber bundles were woven into silk fabric or embroidered on a cotton fabric. Under the simulated sunlight, the temperature of RSF/CuS fabric could increase to more than 40 °C from room temperature. Also, as per the infrared images, the pattern of embroidery displayed a significant difference in temperature increase as compared to cotton matrix. Based on these results, an almost colorless RSF/CuS hybrid fiber that can be mass produced by wet spinning may have great potential in the fabrication of dyeable, light, and comfortable silk functional fabric with spontaneous heating characteristics under sunlight.

Artificial ligament made from silk protein/Laponite hybrid fibers

With developments in tissue engineering, artificial ligaments are expected to be future materials for anterior cruciate ligament (ACL) reconstruction. However, poor healing of the intraosseous part after ACL reconstruction significantly hinders their applications in this field. In this study, a bioactive clay Laponite (LAP) was introduced into the regenerated silk fibroin (RSF) spinning dope to produce functional RSF/LAP hybrid fibers by wet-spinning. These RSF/LAP hybrid fibers were then woven into artificial ligament for ACL reconstruction. The structure and mechanical properties of RSF/LAP hybrid fibers were extensively studied by different means. Results confirmed the presence of LAP in RSF fibers and revealed that the addition of LAP slightly deteriorated the comprehensive mechanical properties of RSF fibers. However, they were still much tougher (with higher breaking energy) than those of degummed natural silkworm silk that was earlier used for making artificial ligament. The artificial ligament woven from RSF/LAP hybrid fibers showed better cytocompatibility and osteogenic differentiation with mouse pre-osteoblasts in vitro than those made from degummed natural silkworm silks and pure RSF fibers. Furthermore, in vivo study in a rat ACL reconstruction model demonstrated that the presence of LAP in the artificial ligament could significantly enhance the graft osseointegration process and also improve the corresponding biomechanical properties of the artificial ligament. Based upon these results, the RSF/LAP hybrid fibers, which can be mass produced by wet-spinning process, are believed to have a great potential for use as artificial ligament materials for ACL reconstruction. Statement of SignificanceIn this study, we successfully introduced Laponite (LAP), a kind of clay that has the function of osteogenic induction, into regenerated silk fibroin (RSF) fibers, which was prepared by a mature wet-spinning method developed in our lab. We believe that through artificial spinning, additional functional components can be added into RSF fibers, which one can hardly achieve with natural silks. We showed that the artificial ligament woven from RSF/LAP hybrid fibers had better cytocompatibility and osteogenic differentiation for mouse pre-osteoblasts in vitro, and significantly enhanced the graft osseointegration process and improved the corresponding biomechanical properties in a rat ACL reconstruction model in vivo, compared to those artificial ligaments made from degummed natural silkworm silks and pure RSF fibers.

Observations of 3 nm Silk Nanofibrils Exfoliated from Natural Silkworm Silk Fibers

Silk fibers are one of the most attractive natural materials that exhibit enchanting luster and superior mechanical properties. Exploring the unique hierarchical architecture structures of natural ...

A Novel Bacterial Polymeric Silk-Like Protein from a Petroleum Origin Bacillus sp. strain NE: Isolation and Characterization

This paper explores a novel silk-like protein (named Bacillus NE silk (BNES)) isolated from a petroleum origin bacterial strain belongs to the genus Bacillus. The successful characterizations for its chemical structure determination and protein composition have been performed. The results demonstrate that BNES protein is a new type of silk-like protein and has a prospective for applying as a new bacterial silk-like biomaterial. The amino acids constituents of silk-like protein showed that (Ala-Pro-Gly) rich-block protein, are the main major amino acids, while the protein Mwt., was recorded around > ~ 400 kDa, which excelled those similar of natural silk. The degummed or purified silk-like protein was successfully electro-spinned for wet-electrospun silk-like nanofibers using electrospinning technique. Silk-like nanofibers gave an adequate and uniform ribbon-shape structure with average diameter of nanofiber around 110 nm. Meanwhile, the block silk-like protein exhibited high thermal degradation monitored at 140–373 °C, which close those of natural silkworm silk. The purified silk-like protein showed no toxic effect against Vero kidney normal cell-line even after 48 h of incubation, using MTT-assay test. The obtained results demonstrate that, silk-like protein from wild type bacterial origin has potential for use as novel fibrous biomaterials for biomedical and environmental applications.

Emergence of supercontraction in regenerated silkworm (Bombyx mori) silk fibers

The conditions required for the emergence of supercontraction in regenerated silkworm (Bombyx mori) silk fibers are assessed through an experimental approach that combines the spinning of regenerated fibers with controlled properties and their characterization by 13C solid-state nuclear magnetic resonance (NMR). Both supercontracting and non-supercontracting regenerated fibers are produced using the straining flow spinning (SFS) technique from 13C labeled cocoons. The short-range microstructure of the fibers is assessed through 13C CP/MAS in air and 13C DD/MAS in water, and the main microstructural features are identified and quantified. The mechanical properties of the regenerated fibers and their microstructures are compared with those of natural silkworm silk. The combined analysis highlights two possible key elements as responsible for the emergence of supercontraction: (1) the existence of an upper and a lower limit of the amorphous phase compatible with supercontraction, and (2) the existence of two ordered phases, β-sheet A and B, which correspond to different packing arrangements of the protein chains.

Single Molecular Layer of Silk Nanoribbon as Potential Basic Building Block of Silk Materials

In this study, nascent silk nanoribbons (SNRs) with an average thickness of 0.4 nm were extracted from natural silkworm silk by partially dissolving degummed silk (DS) in sodium hydroxide (NaOH)/urea solution at -12 °C. In this gentle treatment, the solvent could not destroy the nanofibrillar structure completely, but the chosen conditions would influence the dimensions of resulting SNRs. Molecular dynamics simulations of silk models indicated that the potential of mean force required to break hydrogen bonds between silk fibroin chains was 40% larger than that of van der Waals interactions between β-sheet layers, allowing the exfoliating treatment. It was found that the resulting SNRs contained a single β-sheet layer and amorphous silk fibroin molecules, which could be considered as the basic building block of DS consisting of hierarchical structures. The demonstrated technique for extracting ultrathin SNRs having the height of a single β-sheet layer may provide a useful pathway for creating stronger and tougher silk-based materials and/or adding functionality and durability in materials for various applications. The hierarchical structure model based on SNRs may afford more insight into the structure and property relationship of fabricating silk-based materials.

Mechanical behaviour and formation process of silkworm silk gut.

High performance silk fibers were produced directly from the silk glands of silkworms (Bombyx mori) following an alternative route to natural spinning. This route is based on a traditional procedure that consists of soaking the silk glands in a vinegar solution and stretching them by hand leading to the so called silkworm guts. Here we present, to the authors' best knowledge, the first comprehensive study on the formation, properties and microstructure of silkworm gut fibers. Comparison of the tensile properties and microstructural organization of the silkworm guts with those of naturally spun fibers allows gain of a deeper insight into the mechanisms that lead to the formation of the fiber, as well as the relationship between the microstructure and properties of these materials. In this regard, it is proved that an acidic environment and subsequent application of tensile stress in the range of 1000 kPa are sufficient conditions for the formation of a silk fiber.

Preparation and Property of Bamboo Silk Fabric

In this paper, natural bamboo yarn and silkworm silk, bamboo pulp yarn and silkworm silk were twisted together to make bamboo silk yarn. And then they were weaved to bamboo silk fabric. The properties of bamboo silk fabrics were studied too. The results showed that bamboo pulp silk fabric was very soft, suitable to make underwear and shirt etc. Natural bamboo silk fabric was relative stiff, suitable to make outwear. All the bamboo silk fabric had wonderful anti statistic property; their cockle elasticity property was equal to silk; the whiteness, moisture regain and moisture permeability were very good. These showed the bamboo silk fabric not only had the properties of bamboo fibers, but also had the properties of pure silk fabric. Then they were suitable to be fabric of garments.

Correlation between processing conditions, microstructure and mechanical behavior in regenerated silkworm silk fibers

AbstractRegenerated silkworm fibers spun through a wet‐spinning process followed by an immersion postspinning drawing step show a work to fracture comparable with that of natural silkworm silk fibers in a wide range of spinning conditions. The mechanical behavior and microstructure of these high performance fibers have been characterized, and compared with those fibers produced through conventional spinning conditions. The comparison reveals that both sets of fibers share a common semicrystalline microstructure, but significant differences are apparent in the amorphous region. Besides, high performance fibers show a ground state and the possibility of tuning their tensile behavior. These properties are characteristic of spider silk and not of natural silkworm silk, despite both regenerated and natural silkworm silk share a common composition different from that of spider silk. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012

Old Silks Endowed with New Properties

High-performance regenerated silkworm Bombyx mori silk fibers with new properties that mimic those of spider silk can be produced through a wet spinning process modified with an immersion postspinning drawing (IPSD) step. IPSD fibers show the ability to recover from irreversible deformation, and their tensile behavior can be tailored repeatedly, features solely exhibited until now by natural spider silk. It is further shown that the new properties emerge from a microstructure that is closer to that of spider than to natural silkworm silk. This work demonstrates that processing plays a role at least comparable to that of the amino acid sequence in the final properties of the material. The spinning process does not only modify the mechanical parameters of the fiber but also can even prompt the emergence of new properties, opening a wide range of new applications for regenerated silk fibers. It also represents a significant change of the paradigm in the field of biomimetics, given that it relaxes the conditi...

Silk Fibers Extruded Artificially from Aqueous Solutions of Regenerated Bombyx mori Silk Fibroin are Tougher than their Natural Counterparts

Regenerated silk fibers extruded from fibroin solutions are highly lustrous and have uniform diameters and circular cross-sections. They are stronger, more extensible, and tougher than natural silkworm silk. These fibers can be spun under clean, sterile, and carefully regulated conditions, and may permit direct incorporation of drugs for controlled release, being suitable for biomedical applications. Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Supramolecular organization of regenerated silkworm silk fibers

The microstructures of N-methylmorpholine-N-oxide (NMMO) regenerated silk fibers have been characterized by atomic force microscopy from the micrometer to the nanometer scale and compared with those previously found from natural silks. Regenerated fibers show poor tensile properties and a brittle behavior, but their mechanical properties improve if subjected to post-spinning drawing. Consequently, it was hypothesized that post-spinning drawing would lead to a microstructure more similar to that of the natural material. Here we show that the microstructure of the samples not subjected to post-spinning drawing is composed of nanoglobules that differ from those found in natural silkworm silk both in size and orientation with respect to the macroscopic axis of the fiber. The microstructure of samples subjected to post-spinning drawing evolves in the sense of decreasing the size but increasing the orientation of the nanoglobules, but these effects are only observed in some regions of the fibers.

Effect of water on Bombyx mori regenerated silk fibers and its application in modifying their mechanical properties

AbstractThe effect of water on regenerated silkworm silk fibers has been studied and compared with that of water on natural silkworm silk fibers. Regenerated fibers are spun from an N‐methylmorpholine‐N‐oxide (NMMO) fibroin solution through a wet‐spinning process, leading to fibers with two distinct tensile behaviors, labeled as brittle and ductile, respectively. Regenerated fibers show a significant contraction when immersed in water. Contraction increases further after drying. In contrast, natural silkworm silk fibers show a negligible contraction when submerged in water. Regenerated fibers tested in water are considerably more compliant than samples tested in air, though their stiffness and tensile strength are significantly reduced. It has been shown that the tensile properties of brittle regenerated fibers can be modified by a wet‐stretching process, which consists of deforming the fiber while immersed in water. Regenerated wet‐stretched fibers always show a ductile behavior independent from their initial tensile behavior. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008