Abstract

It is challenging for ionic liquid gels to achieve the combination of rapid self-healing with high toughness. Here, ionic liquid gels (DI-PR) were prepared from readily available materials. A dynamic covalently bonded oxime-carbamate was prepared from polycaprolactone diol, isophorone diisocyanate and dimethylethyleneglyoxime, followed by addition of the "rigid-flexible" cross-linking agent rutin to chemically cross-link the polymer chains and afford the ionic liquid gels, DI-PR. The tensile strength, elongation at break and toughness of the DI-PR gels were as high as 16.5 MPa, 1132.6%, and 52.6 MJ m-3, respectively. The toughness is similar to that of natural silkworm silk (70 MJ m-3) and wool (60 MJ m-3). After stretching, the DI-PR can rebound within 1 s, their room temperature self-healing rate is as high as 92%, they remain functional over the temperature range -50 °C to 140 °C and the interface with a steel plate has an adhesion toughness of >2000 J m-2. These properties mean that the DI-PR gels are particularly suitable for use as anticorrosion coatings for submarine and underground gas and oil pipelines. The use of rutin, which combines rigid quercetin-based structural units with flexible glycoside-based structural units, as a cross-linking agent, provides a new method for improving the toughness of soft materials through its synergistic interaction with hard and soft chain fragments of polyurethanes.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.