Native Binding Research Articles

Computational design of an epitope-specific Keap1 binding antibody using hotspot residues grafting and CDR loop swapping

Therapeutic and diagnostic applications of monoclonal antibodies often require careful selection of binders that recognize specific epitopes on the target molecule to exert a desired modulation of biological function. Here we present a proof-of-concept application for the rational design of an epitope-specific antibody binding with the target protein Keap1, by grafting pre-defined structural interaction patterns from the native binding partner protein, Nrf2, onto geometrically matched positions of a set of antibody scaffolds. The designed antibodies bind to Keap1 and block the Keap1-Nrf2 interaction in an epitope-specific way. One resulting antibody is further optimised to achieve low-nanomolar binding affinity by in silico redesign of the CDRH3 sequences. An X-ray co-crystal structure of one resulting design reveals that the actual binding orientation and interface with Keap1 is very close to the design model, despite an unexpected CDRH3 tilt and VH/VL interface deviation, which indicates that the modelling precision may be improved by taking into account simultaneous CDR loops conformation and VH/VL orientation optimisation upon antibody sequence change. Our study confirms that, given a pre-existing crystal structure of the target protein-protein interaction, hotspots grafting with CDR loop swapping is an attractive route to the rational design of an antibody targeting a pre-selected epitope.

RNA-binding specificity landscape of the pentatricopeptide repeat protein PPR10.

Pentatricopeptide repeat (PPR) proteins comprise a large family of helical repeat proteins that influence gene expression in mitochondria and chloroplasts. PPR tracts can bind RNA via a modular one repeat–one nucleotide mechanism in which the nucleotide is specified by the identities of several amino acids in each repeat. This mode of recognition, the so-called PPR code, offers opportunities for the prediction of native PPR binding sites and the design of proteins to bind specified RNAs. However, a deep understanding of the parameters that dictate the affinity and specificity of PPR–RNA interactions is necessary to realize these goals. We report a comprehensive analysis of the sequence specificity of PPR10, a protein that binds similar RNA sequences of ∼18 nucleotides (nt) near the chloroplast atpH and psaJ genes in maize. We assessed the contribution of each nucleotide in the atpH binding site to PPR10 affinity in vitro by analyzing the effects of single-nucleotide changes at each position. In a complementary approach, the RNAs bound by PPR10 from partially randomized RNA pools were analyzed by deep sequencing. The results revealed three patches in which nucleotide identity has a major impact on binding affinity. These include 5 nt for which protein contacts were not observed in a PPR10–RNA crystal structure and 4 nt that are not explained by current views of the PPR code. These findings highlight aspects of PPR–RNA interactions that pose challenges for binding site prediction and design.

On Characterizing the Interactions between Proteins and Guanine Quadruplex Structures of Nucleic Acids.

Guanine quadruplexes (G4s) are four-stranded secondary structures of nucleic acids which are stabilized by noncanonical hydrogen bonding systems between the nitrogenous bases as well as extensive base stacking, or pi-pi, interactions. Formation of these structures in either genomic DNA or cellular RNA has the potential to affect cell biology in many facets including telomere maintenance, transcription, alternate splicing, and translation. Consequently, G4s have become therapeutic targets and several small molecule compounds have been developed which can bind such structures, yet little is known about how G4s interact with their native protein binding partners. This review focuses on the recognition of G4s by proteins and small peptides, comparing the modes of recognition that have thus far been observed. Emphasis will be placed on the information that has been gained through high-resolution crystallographic and NMR structures of G4/peptide complexes as well as biochemical investigations of binding specificity. By understanding the molecular features that lead to specificity of G4 binding by native proteins, we will be better equipped to target protein/G4 interactions for therapeutic purposes.

Time resolved calorimetry of photo-induced folding in horse heart cytochrome c at high pH

Here the molar volume and enthalpy changes associated with the early events in the folding of ferrocytochrome c (Cc) at high pH have been examined using time resolved photoacoustic calorimetry (PAC). The data reveal an overall volume change of 1.3 ± 0.3 mL mol−1 and an enthalpy change of 13 ± 7 kcal mol −1 occurring subsequent to photodissociation of the unfolded CO bound Cc species in <∼20 ns. Two additional kinetic phases are observed that are associated with non-native His binding (ΔH and ΔV of 2 ± 4 kcal mol−1 and -0.5 mL mol−1, τ ∼ 2.5 μs ) and Met binding (ΔH and ΔV -0.4 ± 2 kcal mol−1 and -0.1 ± 0.1 mL mol−1, τ∼ 660 ns). Considering only protein conformational changes (excluding volume and enthalpies associated with heme ligation events) the initial conformational event exhibits a ΔH and ΔV of 6 ± 3 kcal mol−1 and -3±0.1 mL mol−1, respectively, that are attributed to a small contraction of the unfolded protein. The corresponding enthalpy associated with both native and non-native ligand binding are found to be −5±4 kcal mol−1 (Fe-Met) and +20 ± 4 kcal mol−1 (Fe-His) with the change in volume for both phases being essential negligible. This would indicate that non-native ligand binding likely occurs from an already collapsed conformation.

Functional and Structural Analysis of a Highly-Expressed Yersinia pestis Small RNA following Infection of Cultured Macrophages.

Non-coding small RNAs (sRNAs) are found in practically all bacterial genomes and play important roles in regulating gene expression to impact bacterial metabolism, growth, and virulence. We performed transcriptomics analysis to identify sRNAs that are differentially expressed in Yersinia pestis that invaded the human macrophage cell line THP-1, compared to pathogens that remained extracellular in the presence of host. Using ultra high-throughput sequencing, we identified 37 novel and 143 previously known sRNAs in Y. pestis. In particular, the sRNA Ysr170 was highly expressed in intracellular Yersinia and exhibited a log2 fold change ~3.6 higher levels compared to extracellular bacteria. We found that knock-down of Ysr170 expression attenuated infection efficiency in cell culture and growth rate in response to different stressors. In addition, we applied selective 2’-hydroxyl acylation analyzed by primer extension (SHAPE) analysis to determine the secondary structure of Ysr170 and observed structural changes resulting from interactions with the aminoglycoside antibiotic gentamycin and the RNA chaperone Hfq. Interestingly, gentamicin stabilized helix 4 of Ysr170, which structurally resembles the native gentamicin 16S ribosomal binding site. Finally, we modeled the tertiary structure of Ysr170 binding to gentamycin using RNA motif modeling. Integration of these experimental and structural methods can provide further insight into the design of small molecules that can inhibit function of sRNAs required for pathogen virulence.

Total Chemical Synthesis of an Intra‐A‐Chain Cystathionine Human Insulin Analogue with Enhanced Thermal Stability

AbstractDespite recent advances in the treatment of diabetes mellitus, storage of insulin formulations at 4 °C is still necessary to minimize chemical degradation. This is problematic in tropical regions where reliable refrigeration is not ubiquitous. Some degradation byproducts are caused by disulfide shuffling of cystine that leads to covalently bonded oligomers. Consequently we examined the utility of the non‐reducible cystine isostere, cystathionine, within the A‐chain. Reported herein is an efficient method for forming this mimic using simple monomeric building blocks. The intra‐A‐chain cystathionine insulin analogue was obtained in good overall yield, chemically characterized and demonstrated to possess native binding affinity for the insulin receptor isoform B. It was also shown to possess significantly enhanced thermal stability indicating potential application to next‐generation insulin analogues.

Total Chemical Synthesis of an Intra-A-Chain Cystathionine Human Insulin Analogue with Enhanced Thermal Stability.

Despite recent advances in the treatment of diabetes mellitus, storage of insulin formulations at 4 °C is still necessary to minimize chemical degradation. This is problematic in tropical regions where reliable refrigeration is not ubiquitous. Some degradation byproducts are caused by disulfide shuffling of cystine that leads to covalently bonded oligomers. Consequently we examined the utility of the non-reducible cystine isostere, cystathionine, within the A-chain. Reported herein is an efficient method for forming this mimic using simple monomeric building blocks. The intra-A-chain cystathionine insulin analogue was obtained in good overall yield, chemically characterized and demonstrated to possess native binding affinity for the insulin receptor isoform B. It was also shown to possess significantly enhanced thermal stability indicating potential application to next-generation insulin analogues.

Detecting the native ligand orientation by interfacial rigidity: SiteInterlock

Understanding the physical attributes of protein-ligand interfaces, the source of most biological activity, is a fundamental problem in biophysics. Knowing the characteristic features of interfaces also enables the design of molecules with potent and selective interactions. Prediction of native protein-ligand interactions has traditionally focused on the development of physics-based potential energy functions, empirical scoring functions that are fit to binding data, and knowledge-based potentials that assess the likelihood of pairwise interactions. Here we explore a new approach, testing the hypothesis that protein-ligand binding results in computationally detectable rigidification of the protein-ligand interface. Our SiteInterlock approach uses rigidity theory to efficiently measure the relative interfacial rigidity of a series of small-molecule ligand orientations and conformations for a number of protein complexes. In the majority of cases, SiteInterlock detects a near-native binding mode as being the most rigid, with particularly robust performance relative to other methods when the ligand-free conformation of the protein is provided. The interfacial rigidification of both the protein and ligand prove to be important characteristics of the native binding mode. This measure of rigidity is also sensitive to the spatial coupling of interactions and bond-rotational degrees of freedom in the interface. While the predictive performance of SiteInterlock is competitive with the best of the five other scoring functions tested, its measure of rigidity encompasses cooperative rather than just additive binding interactions, providing novel information for detecting native-like complexes. SiteInterlock shows special strength in enhancing the prediction of native complexes by ruling out inaccurate poses. Proteins 2016; 84:1888-1901. © 2016 Wiley Periodicals, Inc.

Blocking peptides and molecular mimicry as treatment for kidney disease.

Protein mimotopes, or blocking peptides, are small therapeutic peptides that prevent protein-protein interactions by selectively mimicking a native binding domain. Inexpensive technology facilitates straightforward design and production of blocking peptides in sufficient quantities to allow preventive and therapeutic trials in both in vitro and in vivo experimental disease models. The kidney is an ideal peptide target, since small molecules undergo rapid filtration and efficient bulk absorption by tubular epithelial cells. Because the half-life of peptides is markedly prolonged in the kidneys compared with the bloodstream, blocking peptides are an attractive tool for treating diverse renal diseases, including ischemia, proteinuric states, such as membranous nephropathy and focal and segmental glomerulosclerosis, and renal cell carcinoma. Therapeutic peptides represent one of the fastest-growing reagent classes for novel drug development in human disease, partly because of their ease of administration, high binding affinity, and minimal off-target effects. This review introduces the concepts of blocking peptide design, production, and administration and highlights the potential use of therapeutic peptides to prevent or treat specific renal diseases.

Exponential repulsion improves structural predictability of molecular docking.

Molecular docking is a powerful tool for theoretical prediction of the preferred conformation and orientation of small molecules within protein active sites. The obtained poses can be used for estimation of binding energies, which indicate the inhibition effect of designed inhibitors, and therefore might be used for in silico drug design. However, the evaluation of ligand binding affinity critically depends on successful prediction of the native binding mode. Contemporary docking methods are often based on scoring functions derived from molecular mechanical potentials. In such potentials, nonbonded interactions are typically represented by electrostatic interactions between atom-centered partial charges and standard 6-12 Lennard-Jones potential. Here, we present implementation and testing of a scoring function based on more physically justified exponential repulsion instead of the standard Lennard-Jones potential. We found that this scoring function significantly improved prediction of the native binding modes in proteins bearing narrow active sites such as serine proteases and kinases. © 2016 Wiley Periodicals, Inc.

Autoradiographic imaging and quantification of the high-affinity GHB binding sites in rodent brain using 3H-HOCPCA

GHB (γ-hydroxybutyric acid) is a compound endogenous to mammalian brain with high structural resemblance to GABA. GHB possesses nanomolar-micromolar affinity for a unique population of binding sites, but the exact nature of these remains elusive. In this study we utilized the highly selective GHB analogue, 3-hydroxycyclopent-1-enecarboxylic acid (HOCPCA) as a tritiated version (3H-HOCPCA) to radioactively label the specific GHB high-affinity binding site and gain further insight into the density, distribution and developmental profile of this protein. We show that, in low nanomolar concentrations, 3H-HOCPCA displays excellent signal-to-noise ratios using rodent brain autoradiography, which makes it a valuable ligand for anatomical quantification of native GHB binding site levels. Our data confirmed that 3H-HOCPCA labels only the high-affinity specific GHB binding site, found in high density in cortical and hippocampal regions. The experiments revealed markedly stronger binding at pH 6.0 (Kd 73.8 nM) compared to pH 7.4 (Kd 2312 nM), as previously reported for other GHB radioligands but similar Bmax values. Using 3H-HOCPCA we analyzed the GHB binding protein profile during mouse brain development. Due to the high sensitivity of this radioligand, we were able to detect low levels of specific binding already at E15 in mouse brain, which increased progressively until adulthood. Collectively, we show that 3H-HOCPCA is a highly sensitive radioligand, offering advantages over the commonly used radioligand 3H-NCS-382, and thus a very suitable in vitro tool for qualitative and quantitative autoradiography of the GHB high-affinity site.

September 2016-This Month in JoVE: Introducing JoVE Genetics, JoVE Biochemistry, and JoVE Cancer Research

This month we are pleased to introduce three new sections of the JoVE family: Genetics, Biochemistry, and Cancer Research. JoVE Genetics contains methodologies for exploring all aspects of genes and heredity-from human genetics to model organisms, epigenetics to evolutionary genetics, and gene editing to gene therapy. This section features a method for genotyping pufferfish species by liquid chromatography/mass spectrometry, described by Miyaguchi. This technique can aid in the appropriate identification and differentiation of toxic species, which is not only important for public health but also for forensics and investigations of food fraud. Also in JoVE Genetics, Yu et al. report methods for genetically engineering the unconventional yeast Yarrowia lipolytica with improved gene deletion efficiency. The engineered Y. lipolytica strains have potential applications in biofuel and biochemical production. JoVE Biochemistry comprises methods that advance our understanding of biomolecule structure and function, as well as their interactions and transformations during biological processes. This month, Gunning et al. present a method of meat authentication using multiple reaction monitoring (MRM) mass spectrometry, which identifies peptides and gives relative quantitation for detecting adulterant species in meat mixtures. This method is sensitive enough to detect 1% horsemeat in beef products. Also in JoVE Biochemistry, Head and Liu describe a method for identifying small molecule-binding proteins using photoaffinity labeling. The target proteins are bound and covalently labeled within the live cellular environment, which helps preserve native protein structure and binding conditions. JoVE Cancer Research encompasses a broad range of techniques used to advance the understanding and treatment of cancer. This includes methodologies for studying carcinogenesis, developing innovative diagnostics and therapeutics, and uncovering the mechanisms of drug resistance. This month in JoVE Cancer Research, Ansari et al. report a method of targeted cell isolation via glass surface functionalization. This method can identify biomarkers of resistance or susceptibility to anti-angiogenic therapies. Also in this section, Domogauer et al. present a mixed cell culture model that mimics the tumor microenvironment. With this model, the intercellular communication within the tumor microenvironment can be studied under various conditions. You've just had a sneak peek of the articles in the newest sections of JoVE. Visit the website to see the full-length articles, plus many more, in JoVE: The Journal of Visualized Experiments.

Interaction with specific HSP90 residues as a scoring function: validation in the D3R Grand Challenge 2015

Here is reported the development of a novel scoring function that performs remarkably well at identifying the native binding pose of a subset of HSP90 inhibitors containing aminopyrimidine or resorcinol based scaffolds. This scoring function is called PocketScore, and consists of the interaction energy between a ligand and three residues in the binding pocket: Asp93, Thr184 and a water molecule. We integrated PocketScore into a molecular docking workflow, and used it to participate in the Drug Design Data Resource (D3R) Grand Challenge 2015 (GC2015). PocketScore was able to rank 180 molecules of the GC2015 according to their binding affinity with satisfactory performance. These results indicate that the specific residues considered by PocketScore are determinant to properly model the interaction between HSP90 and its subset of inhibitors containing aminopyrimidine or resorcinol based scaffolds. Moreover, the development of PocketScore aimed at improving docking power while neglecting the prediction of binding affinities, suggesting that accurate identification of native binding poses is a determinant factor for the performance of virtual screens.

CLUB-MARTINI: Selecting Favourable Interactions amongst Available Candidates, a Coarse-Grained Simulation Approach to Scoring Docking Decoys.

Large-scale identification of native binding orientations is crucial for understanding the role of protein-protein interactions in their biological context. Measuring binding free energy is the method of choice to estimate binding strength and reveal the relevance of particular conformations in which proteins interact. In a recent study, we successfully applied coarse-grained molecular dynamics simulations to measure binding free energy for two protein complexes with similar accuracy to full-atomistic simulation, but 500-fold less time consuming. Here, we investigate the efficacy of this approach as a scoring method to identify stable binding conformations from thousands of docking decoys produced by protein docking programs. To test our method, we first applied it to calculate binding free energies of all protein conformations in a CAPRI (Critical Assessment of PRedicted Interactions) benchmark dataset, which included over 19000 protein docking solutions for 15 benchmark targets. Based on the binding free energies, we ranked all docking solutions to select the near-native binding modes under the assumption that the native-solutions have lowest binding free energies. In our top 100 ranked structures, for the ‘easy’ targets that have many near-native conformations, we obtain a strong enrichment of acceptable or better quality structures; for the ‘hard’ targets without near-native decoys, our method is still able to retain structures which have native binding contacts. Moreover, in our top 10 selections, CLUB-MARTINI shows a comparable performance when compared with other state-of-the-art docking scoring functions. As a proof of concept, CLUB-MARTINI performs remarkably well for many targets and is able to pinpoint near-native binding modes in the top selections. To the best of our knowledge, this is the first time interaction free energy calculated from MD simulations have been used to rank docking solutions at a large scale.

Remarkably low affinity of CD4/peptide-major histocompatibility complex class II protein interactions

The αβ T-cell coreceptor CD4 enhances immune responses more than 1 million-fold in some assays, and yet the affinity of CD4 for its ligand, peptide-major histocompatibility class II (pMHC II) on antigen-presenting cells, is so weak that it was previously unquantifiable. Here, we report that a soluble form of CD4 failed to bind detectably to pMHC II in surface plasmon resonance-based assays, establishing a new upper limit for the solution affinity at 2.5 mM. However, when presented multivalently on magnetic beads, soluble CD4 bound pMHC II-expressing B cells, confirming that it is active and allowing mapping of the native coreceptor binding site on pMHC II. Whereas binding was undetectable in solution, the affinity of the CD4/pMHC II interaction could be measured in 2D using CD4- and adhesion molecule-functionalized, supported lipid bilayers, yielding a 2D Kd of ∼5,000 molecules/μm(2) This value is two to three orders of magnitude higher than previously measured 2D Kd values for interacting leukocyte surface proteins. Calculations indicated, however, that CD4/pMHC II binding would increase rates of T-cell receptor (TCR) complex phosphorylation by threefold via the recruitment of Lck, with only a small, 2-20% increase in the effective affinity of the TCR for pMHC II. The affinity of CD4/pMHC II therefore seems to be set at a value that increases T-cell sensitivity by enhancing phosphorylation, without compromising ligand discrimination.

Structural Basis for the Interaction between Pyk2-FAT Domain and Leupaxin LD Repeats.

Proline-rich tyrosine kinase 2 (Pyk2) is a nonreceptor tyrosine kinase and belongs to the focal adhesion kinase (FAK) family. Like FAK, the C-terminal focal adhesion-targeting (FAT) domain of Pyk2 binds to paxillin, a scaffold protein in focal adhesions; however, the interaction between the FAT domain of Pyk2 and paxillin is dynamic and unstable. Leupaxin is another member in the paxillin family and was suggested to be the native binding partner of Pyk2; Pyk2 gene expression is strongly correlated with that of leupaxin in many tissues including primary breast cancer. Here, we report that leupaxin interacts with Pyk2-FAT. Leupaxin has four leucine–aspartate (LD) motifs. The first and third LD motifs of leupaxin preferably target the two LD-binding sites on the Pyk2-FAT domain, respectively. Moreover, the full-length leupaxin binds to Pyk2-FAT as a stable one-to-one complex. Together, we propose that there is an underlying selectivity between leupaxin and paxillin for Pyk2, which may influence the differing behavior of the two proteins at focal adhesion sites.

Oxygen-binding Protein Fiber and Microgel: Supramolecular Myoglobin-Poly(acrylate) Conjugates.

A supramolecular conjugate of myoglobin (Mb) and water-soluble poly(acrylate), (PA5k and PA25k , where 5k and 25k represent the molecular weight of the polymers, respectively), is constructed on the basis of a noncovalent heme-heme pocket interaction. The modified heme with an amino group linked to the terminus of one of the heme-propionates is coupled to the side-chain carboxyl groups of poly(acrylate) activated by N-hydroxysuccinimide. The ratios of the heme-modified monomer unit and the unmodified monomer unit (m:n) in the polymer chains of Heme-PA5k and Heme-PA25k were determined to be 4.5:95.5 and 3.1:96.9, respectively. Subsequent addition of apoMb to the conjugated polymers provides Mb-connected fibrous nanostructures confirmed by atomic force microscopy. A mixture of the heme-modified polymer and dimeric apomyoglobin as a cross-linker forms a microgel in which the reconstituted myoglobin retains its native exogenous ligand binding activity.

Fatty acid binding proteins have the potential to channel dietary fatty acids into enterocyte nuclei

Intracellular lipid binding proteins, including fatty acid binding proteins (FABPs) 1 and 2, are highly expressed in tissues involved in the active lipid metabolism. A zebrafish model was used to demonstrate differential expression levels of fabp1b.1, fabp1b.2, and fabp2 transcripts in liver, anterior intestine, and brain. Transcription levels of fabp1b.1 and fabp2 in the anterior intestine were upregulated after feeding and modulated according to diet formulation. Immunofluorescence and electron microscopy immunodetection with gold particles localized these FABPs in the microvilli, cytosol, and nuclei of most enterocytes in the anterior intestinal mucosa. Nuclear localization was mostly in the interchromatin space outside the condensed chromatin clusters. Native PAGE binding assay of BODIPY-FL-labeled FAs demonstrated binding of BODIPY-FLC(12) but not BODIPY-FLC(5) to recombinant Fabp1b.1 and Fabp2. The binding of BODIPY-FLC(12) to Fabp1b.1 was fully displaced by oleic acid. In vivo experiments demonstrated, for the first time, that intestinal absorption of dietary BODIPY-FLC(12) was followed by colocalization of the labeled FA with Fabp1b and Fabp2 in the nuclei. These data suggest that dietary FAs complexed with FABPs are able to reach the enterocyte nucleus with the potential to modulate nuclear activity.

Achieving Single-Nucleotide Specificity in Direct Quantitative Analysis of Multiple MicroRNAs (DQAMmiR)

Direct quantitative analysis of multiple miRNAs (DQAMmiR) utilizes CE with fluorescence detection for fast, accurate, and sensitive quantitation of multiple miRNAs. Here we report on achieving single-nucleotide specificity and, thus, overcoming a principle obstacle on the way of DQAMmiR becoming a practical miRNA analysis tool. In general, sequence specificity is reached by raising the temperature to the level at which the probe-miRNA hybrids with mismatches melt while the matches remain intact. This elevated temperature is used as the hybridization temperature. Practical implementation of this apparently trivial approach in DQAMmiR has two major challenges. First, melting temperatures of all mismatched hybrids should be similar to each other and should not reach the melting temperature of any of the matched hybrids. Second, the elevated hybridization temperature should not deteriorate CE separation of the hybrids from the excess probes and the hybrids from each other. The second problem is further complicated by the reliance of separation in DQAMmiR on single-strand DNA binding protein (SSB) whose native structure and binding properties may be drastically affected by the elevated temperature. These problems were solved by two approaches. First, locked nucleic acid (LNA) bases were incorporated into the probes to normalize the melting temperatures of all target miRNA hybrids allowing for a single hybridization temperature; binding of SSB was not affected by LNA bases. Second, a dual-temperature CE was developed in which separation started with a high capillary temperature required for proper hybridization and continued at a low capillary temperature required for quality electrophoretic separation of the hybrids from excess probes and the hybrids from each other. The developed approach was sufficiently robust to allow its integration with sample preconcentration by isotachophoresis to achieve a limit of detection below 10 pM.

Stereoselective Synthesis of β‐(5‐Arylthiazolyl) α‐Amino Acids and Use in Neurotensin Analogues

AbstractA series of new unnatural amino acids bearing a β‐arylthiazole side chain was synthesized by exploiting a diastereoselective alkylation starting from glycine tert‐butyl ester Schiff base with hydroxypinanone as the chiral inducer. This strategy afforded β‐arylthiazole alanines in good chemical yields and with 98 % ee. Due to their aromatic properties, these newly generated amino acids were used to prepare neurotensin (NT)[8–13] analogues by serving as replacements for the native Tyr11 residue. Incorporation of the (L)‐(+)‐(β‐phenylthiazol‐4‐yl)alanine residue at NT[8–13] position 11 improved plasma stability and selectivity towards NTS1, while also preserving native receptor binding affinity and biological activity.