Narrow-band Resonance Research Articles

Waveguide-Based Split-Ring Resonators for Narrow-Band Filters Near 380 GHz

This work addresses the design of sub-terahertz narrow-band resonators for high performance and low-cost manufacturability. The intended application for these resonators is to realize narrow-band filters for passive millimeter-wave sounding of upper atmospheric humidity using the 380 GHz water vapor absorption line. Various narrow-band resonator designs and manufacturing processes were considered for this application. A design based on a waveguide split-ring resonator topology was selected to be developed and manufactured using laser machining. Experimental results are presented and compared with results from simulations for ten narrow-band resonators fabricated with a design center frequency in the WR-2.2 (325–500 GHz) waveguide band.

A perspective on boron-based multiple resonance narrowband emitters and devices

Boron-based multiple resonance thermally activated delayed fluorescent (MR-TADF) emitters have shown great promises for applications in high-definition displays. This class of heteroatom-doped nanographene materials typically show very narrow-band emission, small singlet–triplet split (ΔEST) values, high Photoluminescence quantum yield, quality chemical and thermal stabilities. Undoubtedly, boron-based MR-TADF emitters hold a leading position in satisfying the wide-color gamut standard of BT. 2020 (The International Telecommunication Union announced a new color gamut standard of broadcast service television for ultra-high-definition TV in 2012). Thus, the development of novel boron-based MR-TADF emitters attracted a great deal of attention from both academia and industry. Here, a comprehensive overview of the latest advances in boron-based MR-TADF emitters is presented, therein, rational strategies for molecular designs, as well as the consequent optical behavior and efficiency and lifetime improvement in organic light-emitting diodes (OLED) devices are discussed. Finally, the challenges as well as some future research directions to unlock the full potential of this fascinating class of materials are provided.

Broadband Aircraft Noise Attenuation Across Low and High Frequencies Using Structured Materials

Controlling broadband noise throughout the spectrum, from low to high frequencies, is a significant challenge for the aerospace, transportation, and construction industries. Although recent research has focused on low-frequency noise control solutions using acoustic metamaterial designs, the narrow-band resonances of these materials remain a limitation. This paper presents a structured material system which addresses this limitation by proposing a parallel assembly of structured materials, enabling broadening of the resonance frequency band from low to high frequencies. The study involves an arrangement of structured metamaterials and Helmholtz Resonators embedded in a layer of glass wool. By meticulously grouping individual resonant frequencies, the proposed assembly effectively attenuates noise over the frequency range of interest. The present research contributes to the development of lasting solutions for aircraft noise across a broad frequency spectrum, showing promising potential for significant noise reduction within practical constraints.

Gradient High-Q Dielectric Metasurfaces for Broadband Sensing and Control of Vibrational Light-Matter Coupling.

Surface-enhanced infrared absorption spectroscopy (SEIRA) has emerged as a powerful technique for ultrasensitive chemical-specific analysis. SEIRA can be realized by employing metasurfaces that can enhance light-matter interactions in the spectral bands of molecular vibrations. Increasing sample complexity emphasizes the need for metasurfaces that can operate simultaneously at different spectral bands, both accessing rich spectral information over a broad band, and resolving subtle differences in the absorption fingerprints through narrow-band resonances. Here, a novel concept of resonance-gradient metasurfaces is introduced, where the required spectral selectivity is achieved via local high-quality-factor (high-Q) resonances, while the continuous coverage of a broad band is enabled by the gradual adjustment of the unit-cell dimensions along the planar structure. The highly tailorable design of the gradient metasurfaces provides flexibility for shaping the spectral sampling density to match the relevant bands of target analytes while keeping a compact device footprint. The versatility of the gradient metasurfaces is demonstrated through several sensing scenarios, including polymer mixture deconvolution, detecting a multistep bioassay, and identification of the onset of vibrational strong coupling regime. The proposed gradient-resonance platform significantly contributes to the rapidly evolving landscape of nonlocal metasurfaces, enabling applications in molecular detection and analysis of fundamental light-matter interaction phenomena.

Narrowband and high-transmissivity guided-mode resonance filter in the visible range

Narrowband and high-transmissivity guided-mode resonance filter in the visible range

Experimental Study of Transverse Mode Suppression on Wideband Hetero Acoustic Layer Surface Acoustic Wave Resonator.

Transverse mode suppression is a great challenge for high-performance surface acoustic wave (SAW) resonators. Conventional methods work well on narrowband resonators, but their performances on wideband resonator have not been demonstrated. In this article, we give an in-depth study on the transverse mode suppression of wideband resonators using 11° YX-LiNbO3 (LN)/70 °Y90°X -quartz (Qz) hetero acoustic layer structure as a platform. Two groups of design, including new dummy electrode and zigzag shape apodization, are proposed. The measured results show that the shape of the dummy electrode is not the dominant factor to affect the transverse mode. The proposed zigzag shape apodization can effectively suppress the transverse, at the same time maintain the quality ( Q ) factor at the same level with the normal type. Additionally, stronger suppression ability can be realized with a tiny tradeoff of Q -factor.

Hybridization of electromagnetic multipoles in a nanoscatterer in the presence of another nanoscatterer

Coupling between multipolar modes of different orders has not been investigated in depth, despite its fundamental and practical relevance in the context of optical metamaterials and metasurfaces. Here, we use an electromagnetic multipole expansion of both the scattered fields and the oscillating electric currents to reveal the multipolar excitations in a nanoparticle positioned close to another nanoparticle. The considered single-particle multipoles radically differ from multipoles excited in a pair of nanoparticles. Using the expansion, we reveal the multipole character of the electric currents and the contributions of the multipole moments to the scattering cross section of each particle, including the effect of their interaction. We find that light scattered by the particles plays the role of an inhomogeneous incident field for each of the particles, leading to hybridization of the originally independent orthogonal multipole resonances. For an incident plane wave polarized along the nanoparticle pair, the hybridization of the dipole and quadrupole resonances gives rise to a significant narrowband resonance in the spectrum of the dipole scattering, which can be of interest for various applications, e.g. in surface-enhanced fluorescence and Raman spectroscopy. In general, this work shows that the multipole-multipole interaction between nanoparticles must be treated by taking into account also such hybridized multipole resonances.

Multiple narrowband whispering-gallery model and transparent display applications of spherical hyperbolic dispersive metamaterial cavity

A novel spherical hyperbolic metamaterial (HMM) cavity for enhancing color-transparent display is designed in this work. This HMM cavity consists of a silver core wrapped alternatively by several dielectric layers and silver layers. According to the effective medium theory and Mie scattering theory, we demonstrate that such an HMM cavity supports multiple whispering-gallery modes with deep subwavelength characteristics. The number of whispering-gallery modes with the same angular momentum is equal to the number of silver layers within the HMM cavity. Furthermore, we demonstrate that these excited whispering-gallery modes are capable of strongly confining the electric fields within the different dielectric shell layers, thus reducing Ohmic losses and narrowing resonance linewidths. In addition, we systematically investigate how the structure parameters affect whispering-gallery modes for an HMM cavity with 5 alternative dielectric layers and silver layers. Interestingly, by increasing the thickness of outermost dielectric layer and silver layer, the resonance wavelength of TM<sub>1,2</sub> mode and TM<sub>1,3</sub> mode remain nearly unchanged. However, the TM<sub>1,1</sub> mode experiences a significant blueshift, and the intensity of the TM<sub>1,1</sub>, TM<sub>1,2</sub> and TM<sub>1,3</sub> mode can be substantially tuned. Consequently, through structural optimization, the HMM cavity can support triple narrowband resonances in the red, green, and blue spectral regions. Finally, we show that the HMM cavity exhibits dipole radiation characteristics at the three resonance wavelengths, effectively confining light within an angular range from –45° to +45° relative to the incident light direction, and confirming the scattered light viewed from a wide angle. These features make the HMM cavity suitable for achieving high transparency, brightness, and wide viewing angles in full-color transparent displays.

Observation of Room-Temperature Exciton-Polariton Emission from Wide-Ranging 2D Semiconductors Coupled with a Broadband Mie Resonator.

Two-dimensional exciton-polaritons in monolayer transition metal dichalcogenides (TMDs) exhibit practical advantages in valley coherence, optical nonlinearities, and even bosonic condensation owing to their light-emission capability. To achieve robust exciton-polariton emission, strong photon-exciton couplings are required at the TMD monolayer, which is challenging due to its atomic thickness. High-quality (Q) factor optical cavities with narrowband resonances are an effective approach but typically limited to a specific excitonic state of a certain TMD material. Herein, we achieve on-demand exciton-polariton emission from a wide range of TMDs at room temperature by hybridizing excitons with broadband Mie resonances spanning the whole visible spectrum. By confining broadband light at the TMD monolayer, our one type of Mie resonator on different TMDs enables enhanced light-matter interactions with multiple excitonic states simultaneously. We demonstrate multi-Rabi splittings and robust polaritonic photoluminescence in monolayer WSe2, WS2, and MoS2. The hybrid system also shows the potential to approach the ultrastrong coupling regime.

Deterministic Fabrication of a Coupled Cavity-Emitter System in Hexagonal Boron Nitride.

Light-matter interactions in optical cavities underpin many applications of integrated quantum photonics. Among various solid-state platforms, hexagonal boron nitride (hBN) is gaining considerable interest as a compelling van der Waals host of quantum emitters. However, progress to date has been limited by an inability to engineer simultaneously an hBN emitter and a narrow-band photonic resonator at a predetermined wavelength. Here, we overcome this problem and demonstrate deterministic fabrication of hBN nanobeam photonic crystal cavities with high quality factors over a broad spectral range (∼400 to 850 nm). We then fabricate a monolithic, coupled cavity-emitter system designed for a blue quantum emitter that has an emission wavelength of 436 nm and is induced deterministically by electron beam irradiation of the cavity hotspot. Our work constitutes a promising path to scalable on-chip quantum photonics and paves the way to quantum networks based on van der Waals materials.

Promoting spintronic terahertz radiation via Tamm plasmon coupling

Spectral fingerprint and terahertz (THz) field-induced carrier dynamics demands the exploration of broadband and intense THz signal sources. Spintronic THz emitters (STEs), with high stability, a low cost, and an ultrabroad bandwidth, have been a hot topic in the field of THz sources. One of the main barriers to their practical application is lack of an STE with strong radiation intensity. Here, through the combination of optical physics and ultrafast photonics, the Tamm plasmon coupling (TPC) facilitating THz radiation is realized between spin THz thin films and photonic crystal structures. Simulation results show that the spectral absorptance can be increased from 36.8% to 94.3% for spin THz thin films with TPC. This coupling with narrowband resonance not only improves the optical-to-spin conversion efficiency, but also guarantees THz transmission with a negligible loss (∼4%) for the photonic crystal structure. According to the simulation, we prepared this structure successfully and experimentally realized a 264% THz radiation enhancement. Furthermore, the spin THz thin films with TPC exhibited invariant absorptivity under different polarization modes of the pump beam and weakening confinement on an obliquely incident pump laser. This approach is easy to implement and offers possibilities to overcome compatibility issues between the optical structure design and low energy consumption for ultrafast THz opto-spintronics and other similar devices.

Electrical generation of surface phonon polaritons

Abstract Efficient electrical generation of mid-infrared light is challenging because of the dearth of materials with natural dipole-active electronic transitions in this spectral region. One approach to solve this problem is through quantum-engineering of the electron dispersion to create artificial transitions, as in quantum cascade devices. In this work we propose an alternative method to generate mid-infrared light, utilizing the coupling between longitudinal and transverse degrees of freedom due to the nonlocal optical response of nanoscopic polar dielectric crystals. Polar crystals support sub-diffraction photonic modes in the mid-infrared. They also support longitudinal phonons, which couple efficiently with electrical currents through the Fröhlich interaction. As we have shown in previous theoretical and experimental works, these two degrees of freedom can hybridize forming longitudinal-transverse polaritons. Here we theoretically demonstrate that longitudinal-transverse polaritons can be efficiently generated by electrical currents, leading to resonant narrowband photonic emission. This approach can therefore be utilised to electrically generate far-field mid-infrared photons in the absence of dipole-active electronic transitions, potentially underpinning a novel generation of mid-infrared optoelectronic devices.

Graviton to photon conversion via parametric resonance

We study the parametric resonance excitation of the electromagnetic field by a gravitational wave. We show that there is narrow band resonance. For an electromagnetic field in the vacuum the resonance occurs only in the second band, and its strength is thus suppressed by two powers of amplitude of the gravitational wave. On the other hand, in the case of an electromagnetic field in a medium with the speed of light smaller than 1 (in natural units), there is a band of Fourier modes which undergo resonance in the first band.

Symmetry breaking of dark-mode metamaterials for voltage-switchable infrared absorption.

We propose electrically reconfigurable absorbers with switchable narrowband resonances in the infrared. Our absorbers consist of two coupled, identical resonators and support a dark supermode. We show that by dynamically breaking the symmetry of the system, the dark supermode can be made to couple to an incoming plane wave, producing a narrowband absorption peak in the spectrum. We use this effect to design and optimize absorbers consisting of coupled metal-insulator-metal resonators based on gallium arsenide. We show that the switching functionality of the designed device is robust to fabrication imperfections, and that it additionally serves as a spectrally tunable absorber. Our results suggest exciting possibilities for designing next-generation reconfigurable absorbers that could benefit several applications, such as energy harvesting and sensing.

On the Laser Generation in Two-Dimensional Materials with Pumping by Quasitrapped Modes

A model has been proposed to describe the laser generation of two-dimensional semiconductor films with near-field pumping by quasitrapped modes excited in dielectric metasurfaces. A metastructure consisting of a Si metasurface coated with a MoTe2 film, where narrow-band resonance of a quasitrapped mode is joined with a broad exciton resonance of a two-dimensional material, has been designed. Threshold conditions for generation in the MoTe2 film with pumping by quasitrapped modes have been determined. The possibility of polarization control of the emission of the proposed metastructure has been demonstrated.

Design and Analysis of Femtosecond Laser-Generated Metasurface for Optical Filter Application

This work investigates a Fano filter design based on a nano-hole array, patterned in fused silica using high-energy ultrafast femtosecond laser pulses. After carefully observing the experimental results, the structural profile of the nano-holes is numerically modeled in a 3D finite-difference time-domain-based software platform. The metasurface design consists of conical shaped air holes structured in the substrate, and a later deposited waveguide layer which leaves craters on the surface as the material fills inside the nano-holes. The spectral properties of the device are studied against variations in the structural parameters, such as the depth of the nano-holes, its surface diameter, and the depth of the craters on the surface of the waveguide. The proposed Fano filter device is designed to operate in the near-infrared (NIR) wavelength range around a telecommunication window of 1550 nm. Multiple narrowband resonances are observed with a linewidth in the range of 1.4 to 24.2 nm and a quality factor of 66.51 to 1090.12. The device shows good spectral tunability over a wide range from 1380 to 1650 nm comprising multiple narrowband resonances and variations in the structural parameters. Since the device can be implemented using a cost-effective and rapid fabrication method, it can be proposed for use in various optical filtering and sensing applications.

Multifunctional resonant wavefront-shaping meta-optics based on multilayer and multi-perturbation nonlocal metasurfaces

Photonic devices rarely provide both elaborate spatial control and sharp spectral control over an incoming wavefront. In optical metasurfaces, for example, the localized modes of individual meta-units govern the wavefront shape over a broad bandwidth, while nonlocal lattice modes extended over many unit cells support high quality-factor resonances. Here, we experimentally demonstrate nonlocal dielectric metasurfaces in the near-infrared that offer both spatial and spectral control of light, realizing metalenses focusing light exclusively over a narrowband resonance while leaving off-resonant frequencies unaffected. Our devices attain this functionality by supporting a quasi-bound state in the continuum encoded with a spatially varying geometric phase. We leverage this capability to experimentally realize a versatile platform for multispectral wavefront shaping where a stack of metasurfaces, each supporting multiple independently controlled quasi-bound states in the continuum, molds the optical wavefront distinctively at multiple wavelengths and yet stay transparent over the rest of the spectrum. Such a platform is scalable to the visible for applications in augmented reality and transparent displays.

Operando optical fiber monitoring of nanoscale and fast temperature changes during photo-electrocatalytic reactions

In situ and continuous monitoring of thermal effects is essential for understanding photo-induced catalytic processes at catalyst’s surfaces. However, existing techniques are largely unable to capture the rapidly changing temperatures occurring in sub-μm layers at liquid-solid interfaces exposed to light. To address this, a sensing system based on a gold-coated conventional single-mode optical fiber with a tilted fiber Bragg grating inscribed in the fiber core is proposed and demonstrated. The spectral transmission from these devices is made up of a dense comb of narrowband resonances that can differentiate between localized temperatures rapid changes at the catalyst’s surface and those of the environment. By using the gold coating of the fiber as an electrode in an electrochemical reactor and exposing it to light, thermal effects in photo-induced catalysis at the interface can be decoded with a temperature resolution of 0.1 °C and a temporal resolution of 0.1 sec, without perturbing the catalytic operation that is measured simultaneously. As a demonstration, stable and reproducible correlations between the light-to-heat conversion and catalytic activities over time were measured for two different catalysis processes (linear and nonlinear). These kinds of sensing applications are ideally suited to the fundamental qualities of optical fiber sensors, such as their compact size, flexible shape, and remote measurement capability, thereby opening the way for various thermal monitoring in hard-to-reach spaces and rapid catalytic reaction processes.

Broadband transparent and high-Q resonant polarization meta-grating enabled by a non-local geometric-phase metasurface.

Spatial wavefront control and high-Q spectral filtering are both of great importance for various optical applications, such as eye-tracking for eyewear, planar optical modulators, and optical sensing. However, it is a great challenge to simultaneously satisfy these two functionalities in a metasurface due to the inevitable conflicts of local and non-local modes, where local modes of a single meta-atom manipulate the wavefront in a broadband range, while non-local collective modes of extended meta-atoms only support high-Q resonances at certain characteristic wavelengths. Here, we demonstrate a low-contrast dielectric non-local meta-grating that provides both spatial and spectral control of light in a broadband range of 700-1600 nm, offering elaborate wavefront shaping only for narrow-band resonances. Such counterintuitive functionality is supported by spatially tailored dark modes (quasi-bound states in the continuum) encoding with spatially varying geometric phases, while low-contrast dielectric provides broadband non-resonant transmission. Moreover, a broadband transparent polarization meta-grating with two resonance wavelengths is presented. Non-local geometric-phase metasurfaces open an exciting avenue for wavefront shaping and spectral manipulation, and may have potential applications in sensing, lasing, and spectral filtering.

Guided-mode resonance with reduced bandwidth in mid-infrared absorption and thermal emission.

Narrowband resonance plays an important role in many optical applications, especially for the development of wavelength-selective properties and enhanced light-matter interaction. In this paper, we demonstrate metal-insulator-metal (MIM) waveguide gratings, which exhibit guided-mode resonance (GMR) with reduced bandwidth in mid-infrared absorption and thermal emission. Our fabricated MIM waveguide grating consists of a copper substrate, a lossless ZnSe film, and a top gold stripe grating. Our measurements reveal strong GMRs with a bandwidth of 1.29% of the central wavelength in both mid-infrared absorption and thermal emission spectra. By varying structural parameters of the MIM waveguide grating, strong absorptions and thermal emissions of GMRs are observed and tuned within the 3-5 µm wavelength range. These results manifest the great potential of engineering infrared properties by using GMR and could be useful for spectral control in a variety of infrared devices.