Nanoliter Volumes Research Articles

Single-cell chemoproteomics identifies metastatic activity signatures in breast cancer.

Protein activity state, rather than protein or mRNA abundance, is a biologically regulated and relevant input to many processes in signaling, differentiation, development, and diseases such as cancer. While there are numerous methods to detect and quantify mRNA and protein abundance in biological samples, there are no general approaches to detect and quantify endogenous protein activity with single-cell resolution. Here, we report the development of a chemoproteomic platform, single-cell activity-dependent proximity ligation, which uses automated, microfluidics-based single-cell capture and nanoliter volume manipulations to convert the interactions of family-wide chemical activity probes with native protein targets into multiplexed, amplifiable oligonucleotide barcodes. We demonstrate accurate, reproducible, and multiplexed quantitation of a six-enzyme (Ag-6) panel with known ties to cancer cell aggressiveness directly in single cells. We further identified increased Ag-6 enzyme activity across breast cancer cell lines of increasing metastatic potential, as well as in primary patient-derived tumor cells and organoids from patients with breast cancer.

On the design and fabrication of nanoliter-volume hanging drop networks

Hanging drop cultures provide a favorable environment for the gentle, gel-free formation of highly uniform three-dimensional cell cultures often used in drug screening applications. Initial cell numbers can be limited, as with primary cells provided by minimally invasive biopsies. Therefore, it can be beneficial to divide cells into miniaturized arrays of hanging drops to supply a larger number of samples. Here, we present a framework for the miniaturization of hanging drop networks to nanoliter volumes. The principles of a single hanging drop are described and used to construct the fundamental equations for a microfluidic system composed of multiple connected drops. Constitutive equations for the hanging drop as a nonlinear capacitive element are derived for application in the electronic-hydraulic analogy, forming the basis for more complex, time-dependent numerical modeling of hanging drop networks. This is supplemented by traditional computational fluid dynamics simulation to provide further information about flow conditions within the wells. A fabrication protocol is presented and demonstrated for creating transparent, microscale arrays of pinned hanging drops. A custom interface, pressure-based fluidic system, and environmental chamber have been developed to support the device. Finally, fluid flow on the chip is demonstrated to align with expected behavior based on the principles derived for hanging drop networks. Challenges with the system and potential areas for improvement are discussed. This paper expands on the limited body of hanging drop network literature and provides a framework for designing, fabricating, and operating these systems at the microscale.

B-036 Systematic Evaluation of Antibody-Antigen Interactions for Suitability in Immunoassays Using Parallel Microarray ELISA

Abstract Background A critical step in immunoassay development is the selection of the appropriate capture and detection antibodies. The use of suboptimal antibodies can drastically affect the quality of the final assay. Traditional selection methods involve a direct testing of potential antibodies in the final assay setting; a time-consuming and material-intensive exercise that is often too complex to test all possibilities. Alternatives, such as abstract K-on/K-off determinations via SPR or BLI can be costly and often show limited translatability to the ultimate assay format. Here, we describe a novel systematic approach to rapidly screen antibody-antigen interactions for key assay specifications and test for translatability of the findings. Methods Nanoliter volumes of potential capture antibodies were spotted onto the bottom of ELISA wells, generating a microarray of antibodies in each well (>11,000 spots per plate). For the analysis of capture antibody-antigen interactions, a titration series of biotinylated analyte in negative sample matrix was applied. Binding was visualized using strep-polyHRP, precipitating TMB and high resolution scanning of each ELISA well. Antibody pair performance was investigated using unlabeled analyte and biotinylated detection antibody options. Sensitivity, specificity, dynamic range, binding speed, binding strength and matrix compatibility were investigated using time courses, concentration ranges, dilutions, interferent spikes and pH/salt/detergent challenges. Signals were quantified to calculate and statistically compare each possible interaction. Results Antibody-antigen interactions were investigated via parallel microarray ELISA for two example immunoassays: the HBsAg and cTnI test. For both analytes, a panel of antibodies was screened revealing antibodies with diverse characteristics. Striking differences were observed depending on the sample matrix composition. Without optimization, antibodies could be identified showing dynamic assay ranges of 3-4 log orders. Time course experiments revealed high-affinity antibodies suitable for rapid diagnostic tests. For HBsAg, levels down to 0.01 IU/mL (∼40 pg/mL) could be reproducibly detected, which is well below the minimal requirement of 0.13 IU/mL. Reactivity against multiple virus serotypes could be confirmed. Interestingly, for the cTnI test, a strong synergistic effect was observed when specific monoclonal antibodies were combined in the capture mix, resulting in a 6-fold sensitivity enhancement compared to their separate performances. Finally, we show that the results obtained with the parallel microarray ELISA approach are highly translatable to the final assay format, ranging from bead-based dry-chemistry assays to chemiluminescent immunoassays. Conclusions The parallel microarray ELISA evaluation presents a robust and reliable method for identifying the best antibodies for an immunoassay. It allows for a systematic and quantitative screen of numerous antibody options within 1-2 weeks under real immunoassay conditions with minimal antibody amounts. This method has shown to be highly translatable and is customizable to accommodate required assay specifications.

Fast acoustic droplet ejection based on annular array transducer

Acoustic droplet ejection (ADE) has become the preferred method for liquid transfer in a variety of applications including synthetic biology, genotyping and drug discovery.Comparing with traditional pipetting techniques, the accuracy and data reproducibility of ADE based liquid transfer are improved, waste and cost are reduced, and cross-contamination is eliminated. The key component in the ADE system is the ultrasound transducer, which is responsible for generating focused ultrasound beam for droplet ejection. However, current ADE systems commonly utilize a single-element focused transducer with a fixed focal length that require mechanical movement to focus on the liquid surface, resulting in reduced liquid transfer efficiency. In this study, we first present a high-frequency annular array transducer for the ADE technology, which enables rapid and dynamic axial focusing to the liquid surface without mechanically moving the transducer, thereby accelerating liquid transfer. Experimental results show that the proposed 10 MHz, 5-element annular array transducer has good dynamic axial focusing ability, and can achieve accurate and stable droplet ejection of nanoliter volume at the designed focal length of 26–32 mm. Our results highlight the potential of the annular array transducer in advancing ADE system for rapid liquid transfer. This technology is expected to be useful in a variety of applications where precise and high-throughput liquid transfer is crucial.

Microfluidic devices, materials, and recent progress for petroleum applications: A review

AbstractMicrofluidic devices are miniaturized systems that manipulate fluids on a small scale, typically at microlitre or nanolitre volumes. They have received significant attention in various industries, including petroleum applications. The recent advancements in microfluidic devices for petroleum applications have the potential to improve oil recovery efficiency, reduce costs, and provide valuable insights into fluid behaviour and reservoir characterization. This paper aims to provide a comprehensive overview of microfluidic devices, their materials, and their applications in the petroleum industry. The first section of the paper focuses on describing the materials used in microfluidic devices specifically tailored for energy sector applications. In the second section, the paper highlights relevant applications and discoveries in petroleum research, showcasing the innovative techniques and special features enabled by microfluidic devices. These applications include but are not limited to asphaltenes characterization, enhanced oil recovery (EOR), and water treatment. The versatility and customization of microfluidic devices have allowed researchers to accurately represent fractures, ensure chemical conformance, simulate high pressure–high temperature conditions and reservoir heterogeneity, and study geochemical interaction. Additionally, molecular tagging and machine learning techniques have been employed for image analysis, further enhancing the capabilities of microfluidic devices. Throughout the paper, the advantages and disadvantages of implementing microfluidic devices and utilizing specific materials are thoroughly discussed. This analysis provides valuable insights into the challenges and potential limitations associated with this technology. To conclude, the paper offers suggestions, ideas, and highlights for future research paths, pointing toward promising directions for further exploration in this field.

ANDeS: An automated nanoliter droplet selection and collection device

The Droplet Microarray (DMA) has emerged as a tool for high-throughput biological and chemical applications by enabling miniaturization and parallelization of experimental processes. Due to its ability to hold hundreds of nanoliter droplets, the DMA enables simple screening and analysis of samples such as cells and biomolecules. However, handling of nanoliter volumes poses a challenge, as manual recovery of nanoliter volumes is not feasible, and traditional laboratory equipment is not suited to work with such low volumes, and small array formats. To tackle this challenge, we developed the Automated Nanoliter Droplet Selection device (ANDeS), a robotic system for automated collection and transfer of nanoliter samples from DMA.ANDeS can automatically collect volumes from 50 to 350 nL from the flat surface of DMA with a movement accuracy of ±30 µm using fused silica capillaries. The system can automatically collect and transfer the droplets from DMA chip into other platforms, such as microtiter plates, conical tubes or another DMA. In addition, to ensure high throughput and multiple droplet collection, the uptake of multiple droplets within a single capillary, separated by air gaps to avoid mixing of the samples within the capillary, was optimized and demonstrated.This study shows the potential of ANDeS in laboratory applications by using it for the collection and transfer of biological samples, contained in nanoliter droplets, for subsequent analysis. The experimental results demonstrate the ability of ANDeS to increase the versatility of the DMA platform by allowing for automated retrieval of nanoliter samples from DMA, which was not possible manually on the level of individual droplets. Therefore, it widens the variety of analytical techniques that can be used for the analysis of content of individual droplets and experiments performed using DMA. Thus, ANDeS opens up opportunities to expand the development of miniaturized assays in such fields as cell screening, omics analysis and combinatorial chemistry.

Extreme thermodynamics in nanolitre volumes through stimulated Brillouin–Mandelstam scattering

Examining the physical properties of materials—particularly of toxic liquids—under a wide range of thermodynamic states is a challenging problem due to the extreme conditions the material has to experience. Such temperature and pressure regimes, which result in a change in the refractive index and sound velocity, can be accessed by optoacoustic interactions such as Brillouin–Mandelstam scattering. Here we demonstrate the Brillouin–Mandelstam measurements of nanolitre volumes of liquids in extreme thermodynamic regimes. This is enabled by a fully sealed liquid-core optical fibre containing carbon disulfide. Within this waveguide, which exhibits tight optoacoustic confinement and a high Brillouin gain, we are able to conduct spatially resolved measurements of the local Brillouin response, giving us access to a resolved image of the temperature and pressure values along the liquid channel. We measure the material properties of the liquid core at very large positive pressures (above 1,000 bar) and substantial negative pressures (below –300 bar), as well as explore the isobaric and isochoric regimes. The extensive thermodynamic control allows the tunability of the Brillouin frequency shift of more than 40% using only minute volumes of liquid.

Compartmentalized Linker Array: A Scalable and Transferrable Microarray Format for Multiplexed Immunoassays.

Microarrays have been widely used for multiplexed bioassays. Fabrication of a conventional microarray typically requires a complex microarray spotter, using which nanoliter bioreagent (e.g., antibody and cells) droplets are delivered onto a glass slide. However, arraying a delicate bioreagent in nanoliter volumes could cause the loss of bioactivity and needs a complex microarray spotter. Further, mixing of different bioreagents in a multiplexed assay leads to cross-reactions, producing false positive signals that impair assay reproducibility and scalability. In this work, we propose a new microarray format, named "compartmentalized linker array (CLA)", that consists of pre-prepared storable microarrays of chemical linkers in microliter compartments. CLA can be used for binding and patterning bioreagents into microarrays by simply pipetting and incubating bioreagent solutions in compartments. Using commonly used aminosilane linker-based antibody microarray, we developed CLA and demonstrated its application for a multiplexed sandwich immunoassay measuring three cancer-related proteins. A "two-phase" blocking system was established for de-activating background regions on glass where no linker molecules are present. Storage conditions of the CLA chip were explored and demonstrated for long-term storage. In a multiplexed immunoassay, low pg/mL sensitivity was achieved for all the three proteins, comparable to those of conventional assays. Moreover, CLA can be potentially used for other applications beyond protein assays, making microarray technology transferrable and widely available for the biological and biomedical research community.

Comparison of two supporting matrices for patient-derived cancer cells in 3D drug sensitivity and resistance testing assay (3D-DSRT).

Central to the success of functional precision medicine of solid tumors is to perform drug testing of patient-derived cancer cells (PDCs) in tumor-mimicking ex vivo conditions. While high throughput (HT) drug screening methods have been well-established for cells cultured in two-dimensional (2D) format, this approach may have limited value in predicting clinical responses. Here, we describe the results of the optimization of drug sensitivity and resistance testing (DSRT) in three-dimensional (3D) growth supporting matrices in a HT mode (3D-DSRT) using the hepatocyte cell line (HepG2) as an example. Supporting matrices included widely used animal-derived Matrigel and cellulose-based hydrogel, GrowDex, which has earlier been shown to support 3D growth of cell lines and stem cells. Further, the sensitivity of ovarian cancer PDCs, from two patients included in the functional precision medicine study, was tested for 52 drugs in 5 different concentrations using 3D-DSRT. Shortly, in the optimized protocol, the PDCs are embedded with matrices and seeded to 384-well plates to allow the formation of the spheroids prior to the addition of drugs in nanoliter volumes with acoustic dispenser. The sensitivity of spheroids to drug treatments is measured with cell viability readout (here, 72 h after addition of drugs). The quality control and data analysis are performed with openly available Breeze software. We show the usability of both matrices in established 3D-DSRT, and report 2D vs 3D growth condition dependent differences in sensitivities of ovarian cancer PDCs to MEK-inhibitors and cytotoxic drugs. This study provides a proof-of-concept for robust and fast screening of drug sensitivities of PDCs in 3D-DSRT, which is important not only for drug discovery but also for personalized ex vivo drug testing in functional precision medicine studies. These findings suggest that comparing results of 2D- and 3D-DSRT is essential for understanding drug mechanisms and for selecting the most effective treatment for the patient.

Electrical Broth Micro-Dilution for Rapid Antibiotic Resistance Testing.

Rapid tests to assess the susceptibility of bacteria to antibiotics are required to inform antibiotic stewardship. We have developed a novel test, which measures changes in the impedance of a 100 nanoliter volume of bacterial suspension to determine an "electrical" minimum inhibitory concentration (eMIC). Two representative strains of Klebsiella pneumoniae, Acinetobacter baumannii, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus were tested against a panel of frontline antibiotics with different modes of action (ciprofloxacin, doxycycline, colistin and imipenem, gentamicin, and ceftazidime). The eMIC measured at 1 h correlated strongly with a standard 24 h microbroth dilution MIC for all combinations of antibiotics and bacteria, allowing strains to be correctly assigned as sensitive or resistant measured in a fraction of the time.

Precise, wide field, and low-cost imaging and analysis of core-shell beads for digital polymerase chain reaction.

Digital droplet reactors have become a valuable tool for the analysis of single cells, organisms, or molecules by discretising reagents into picolitre or nanolitre volumes. However, DNA-based assays typically require processing of samples on the scale of tens of microlitres, with the detection of as few as one or as many as a hundred thousand fragments. Through the present work, we introduce a flow-focusing microfluidic device that produces 120 picolitre core-shell beads, which are assembled into a monolayer in a Petri dish for visualization and analysis. The bead assembly is subjected to polymerase chain reaction (PCR) amplification and fluorescence detection to digitally quantify the DNA concentration of the sample. We use a low-cost 21-megapixel digital camera and macro lens to capture wide-field fluorescence images with a 10-30 mm2 field-of-view at magnifications ranging from 5× to 2.5×. A customised Python script analysed the acquired images. Our study demonstrates the ability to perform digital PCR analysis of the entire bead assembly through end-point imaging and compare the results with those obtained through RT-qPCR.

A low-cost, high-throughput microfluidic nano-culture platform for functional metagenomics.

Functional metagenomics is an attractive culture-independent approach for functional screening of diverse microbiomes to identify known and novel genes. Since functional screening can involve sifting through tens of thousands of metagenomic library clones, an easy high-throughput screening approach is desirable. Here, we demonstrate a proof-of-concept application of a low-cost, high-throughput droplet based microfluidic assay to the selection of antibiotic resistance genes from a soil metagenomic library. Metagenomic library members encapsulated in nanoliter volume water-in-oil droplets were printed on glass slides robotically, and cell growth in individual drops in the presence of ampicillin was imaged and quantified to identify ampicillin-resistant clones. From the hits, true positives were confirmed by sequencing and functional validation. The ease of liquid handling, ease of set-up, low cost, and robust workflow makes the droplet-based nano-culture platform a promising candidate for screening and selection assays for functional metagenomic libraries.

The phenomenon of zero survival of sperm cells cryopreserved in nanoliter volumes

The phenomenon of zero survival of sperm cells cryopreserved in nanoliter volumes

Vitrification within a nanoliter volume: oocyte and embryo cryopreservation within a 3D photopolymerized device

PurposeVitrification permits long-term banking of oocytes and embryos. It is a technically challenging procedure requiring direct handling and movement of cells between potentially cytotoxic cryoprotectant solutions. Variation in adherence to timing, and ability to trace cells during the procedure, affects survival post-warming. We hypothesized that minimizing direct handling will simplify the procedure and improve traceability. To address this, we present a novel photopolymerized device that houses the sample during vitrification.MethodsThe fabricated device consisted of two components: the Pod and Garage. Single mouse oocytes or embryos were housed in a Pod, with multiple Pods docked into a Garage. The suitability of the device for cryogenic application was assessed by repeated vitrification and warming cycles. Oocytes or early blastocyst-stage embryos were vitrified either using standard practice or within Pods and a Garage and compared to non-vitrified control groups. Post-warming, we assessed survival rate, oocyte developmental potential (fertilization and subsequent development) and metabolism (autofluorescence).ResultsVitrification within the device occurred within ~ 3 nL of cryoprotectant: this volume being ~ 1000-fold lower than standard vitrification. Compared to standard practice, vitrification and warming within our device showed no differences in viability, developmental competency, or metabolism for oocytes and embryos. The device housed the sample during processing, which improved traceability and minimized handling. Interestingly, vitrification-warming itself, altered oocyte and embryo metabolism.ConclusionThe Pod and Garage system minimized the volume of cryoprotectant at vitrification—by ~ 1000-fold—improved traceability and reduced direct handling of the sample. This is a major step in simplifying the procedure.

All-in-One Optofluidic Chip for Molecular Biosensing Assays.

Integrated biosensor platforms have become subjects of high interest for consolidated assay preparation and analysis to reduce sample-to-answer response times. By compactly combining as many biosensor processes and functions as possible into a single lab-on-chip device, all-in-one point-of-care devices can aid in the accessibility and speed of deployment due to their compact size and portability. Biomarker assay preparation and sensing are functionalities that are often carried out on separate devices, thus increasing opportunity of contamination, loss of sample volume, and other forms of error. Here, we demonstrate a complete lab-on-chip system combining sample preparation, on-chip optofluidic dye laser, and optical detection. We first show the integration of an on-chip distributed feedback dye laser for alignment-free optical excitation of particles moving through a fluidic channel. This capability is demonstrated by using Rhodamine 6G as the gain medium to excite single fluorescent microspheres at 575 nm. Next, we present an optofluidic PDMS platform combining a microvalve network (automaton) for sample preparation of nanoliter volumes, on-chip distributed feedback dye laser for target excitation, and optical detection. We conduct concurrent capture and fluorescence tagging of Zika virus nucleic acid on magnetic beads in 30 min. Target-carrying beads are then optically excited using the on-chip laser as they flow through an analysis channel, followed by highly specific fluorescence detection. This demonstration of a complete all-in-one biosensor is a tangible step in the development of a rapid, point-of-care device that can assist in limiting the severity of future outbreaks.

Synthesis and direct assay of large macrocycle diversities by combinatorial late-stage modification at picomole scale

Macrocycles have excellent potential as therapeutics due to their ability to bind challenging targets. However, generating macrocycles against new targets is hindered by a lack of large macrocycle libraries for high-throughput screening. To overcome this, we herein established a combinatorial approach by tethering a myriad of chemical fragments to peripheral groups of structurally diverse macrocyclic scaffolds in a combinatorial fashion, all at a picomole scale in nanoliter volumes using acoustic droplet ejection technology. In a proof-of-concept, we generate a target-tailored library of 19,968 macrocycles by conjugating 104 carboxylic-acid fragments to 192 macrocyclic scaffolds. The high reaction efficiency and small number of side products of the acylation reactions allowed direct assay without purification and thus a large throughput. In screens, we identify nanomolar inhibitors against thrombin (Ki = 44 ± 1 nM) and the MDM2:p53 protein-protein interaction (Kd MDM2 = 43 ± 18 nM). The increased efficiency of macrocycle synthesis and screening and general applicability of this approach unlocks possibilities for generating leads against any protein target.

Multiplexed detection of bacterial nucleic acids using Cas13 in droplet microarrays

Rapid and accurate diagnosis of infections is fundamental to individual patient care and public health management. Nucleic acid detection methods are critical to this effort, but are limited either in the breadth of pathogens targeted or by the expertise and infrastructure required. We present here a high-throughput system that enables rapid identification of bacterial pathogens, bCARMEN, which utilizes: (1) modular CRISPR-Cas13-based nucleic acid detection with enhanced sensitivity and specificity; and (2) a droplet microfluidic system that enables thousands of simultaneous, spatially multiplexed detection reactions at nanoliter volumes; and (3) a novel preamplification strategy that further enhances sensitivity and specificity. We demonstrate bCARMEN is capable of detecting and discriminating 52 clinically relevant bacterial species and several key antibiotic resistance genes. We further develop a simple proof of principle workflow using stabilized reagents and cell phone camera optical readout, opening up the possibility of a rapid point-of-care multiplexed bacterial pathogen identification and antibiotic susceptibility testing.

Derivation and Differentiation of Human Pluripotent Stem Cells in Microfluidic Devices.

An integrative approach based on microfluidic design and stem cell biology enables capture of the spatial-temporal environmental evolution underpinning epigenetic remodeling and the morphogenetic process. We examine the body of literature that encompasses microfluidic applications where human induced pluripotent stem cells are derived starting from human somatic cells and where human pluripotent stem cells are differentiated into different cell types. We focus on recent studies where the intrinsic features of microfluidics have been exploited to control the reprogramming and differentiation trajectory at the microscale, including the capability of manipulating the fluid velocity field, mass transport regime, and controllable composition within micro- to nanoliter volumes in space and time. We also discuss studies of emerging microfluidic technologies and applications. Finally, we critically discuss perspectives and challenges in the field and how these could be instrumental for bringing about significant biological advances in the field of stem cell engineering.

"Cells-to-cDNA on Chip": Phenotypic Assessment and Gene Expression Analysis from Live Cells in Nanoliter Volumes Using Droplet Microarrays.

In vitro cell-based experiments are particularly important in fundamental biological research. Microscopy-based readouts to identify cellular changes in response to various stimuli are a popular choice, but gene expression analysis is essential to delineate the underlying molecular dynamics in cells. However, cell-based experiments often suffer from interexperimental variation, especially while using different readout methods. Therefore, establishment of platforms that allow for cell screening, along with parallel investigations of morphological features, as well as gene expression levels, is crucial. The droplet microarray (DMA) platform enables cell screening in hundreds of nanoliter droplets. In this study, a "Cells-to-cDNA on Chip" method is developed enabling on-chip mRNA isolation from live cells and conversion to cDNA in individual droplets of 200 nL. This novel method works efficiently to obtain cDNA from different cell numbers, down to single cell per droplet. This is the first established miniaturized on-chip strategy that enables the entire course of cell screening, phenotypic microscopy-based assessments along with mRNA isolation and its conversion to cDNA for gene expression analysis by real-time PCR on an open DMA platform. The principle demonstrated in this study sets a beginning for myriad of possible applications to obtain detailed information about the molecular dynamics in cultured cells.

Stern-Volmer analysis of photocatalyst fluorescence quenching within hollow-core photonic crystal fibre microreactors.

We report the use of optofluidic hollow-core photonic crystal fibres as microreactors for Stern-Volmer (SV) luminescence quenching analysis of visible-light photocatalytic reactions. This technology enables measurements on nanolitre volumes and paves the way for automated SV analyses in continuous flow that minimise catalyst and reagent usage. The method is showcased using a recently developed photoredox-catalysed α-C-H alkylation reaction of unprotected primary alkylamines.