Cellulose Nanoparticles Research Articles

Bio-Nanocomposite Hydrogel Beads Based on Cellulose and Biogenic Silver Nanoparticles Prepared by ex-situ and in-situ Methods for Antibacterial Applications

Bio-Nanocomposite Hydrogel Beads Based on Cellulose and Biogenic Silver Nanoparticles Prepared by ex-situ and in-situ Methods for Antibacterial Applications

Co-encapsulation of quercetin and resveratrol: Comparison in different layers of zein-carboxymethyl cellulose nanoparticles

Three nanoparticles were fabricated for the co-delivery of quercetin and resveratrol. Nanoparticles consisted of a zein and carboxymethyl cellulose assembled using antisolvent precipitation/layer-by-layer deposition method. Nanoparticles contained quercetin in the core and resveratrol in the shell, resveratrol in the core and quercetin in the shell or both quercetin and resveratrol in the core. The particle sizes of nanoparticles were 280.4, 214.8, and 181.8 nm, respectively. Zeta-potential was about −50 mV and PDI was about 0.3. The different positions of polyphenol distribution nanoparticles could reduce the competition between the two polyphenols, the encapsulation rate, loading rate and storage stability reached up to 91.7 %, 5.37 % and 97.1 %, respectively. FT-IR showed that hydrophobic and electrostatic interactions were the main driving forces of nanoparticle assembly. XRD showed that two polyphenols were successfully encapsulated in nanoparticles. TGA showed that distributing the nanoparticles in different layers would enhance thermal stability. TEM and SEM showed that polysaccharides attached to the surface of nanoparticles formed a core-shell structure with uniform particle size. All three nanoparticles could release two polyphenols slowly in simulated gastrointestinal digestion, Korsmeyer-Peppas was the most suitable kinetic release model. Therefore, biopolymer-based nanocarriers can be created to enhance the loading, stability, and bioaccessibility of co-encapsulated nutraceuticals.

Fabrication of edible nanocellulose chitosan bi-component film based on a novel “swell-permeate” approach

The fabrication of multi-component film with colloidal particles could be inconvenient. A novel “swell-permeate” (SP) strategy was proposed to form homogeneous multi-component films. The SP strategy allows colloidal particles to fit into the polymer network by stretching the polymer chains assisted by water. We demonstrated the strategy by creating films with polysaccharide substrates as β-cyclodextrin grafted chitosan (CS) with nanocellulose. The addition of nanocellulose significantly increased the mechanical properties and the barrier performance of the films. The size of nanocellulose particles in affecting mechanical properties was investigated by applying different length of cellulose nanocrystal (CNC), the longer of which, due to denser physical entanglements, showed a better increase to the film in the elastic modulus and tensile strength to 4.54-fold and 5.71-fold, respectively. The films were also loaded with ethyl-p-coumarate (EpCA) and had an enhanced performance in anti-microbial for Altenaria alternata, Salmonella typhi, and Escherichia coli. The anti-oxidative property was increased as well, and both effects were valid both in vitro and in ready-to-eat apples. The strategy provides a practical and convenient method for fabricating colloidal particle containing films, and the novel idea of “swell-permeate” is potentially regarded as a new solution to the challenge of ready-to-eat food quality maintenance.

Microbial assisted date palm nanocellulose isolation and the fabrication of hydrophobic bioaerogel for oil absorption application

This study introduces a novel approach by utilizing Aspergillus niger for the isolation of nanocellulose from date palm sheath fibers (DPSF), achieving significant nano-scale reduction and high yield efficiency. The enzymatic breakdown by Aspergillus niger efficiently reduced the fibers' size, achieving an 81.3 % transition to nano-scale (<100 nm) after 96 hours, with an impressive 84 % yield using 72 hours of fungal treatment. The isolated nanocellulose demonstrated superior thermal stability and zeta potential value of −32.5 mV indicates a stable colloidal suspension due to the electrostatic repulsion between nanocellulose particles. Triethoxymethylsilane (TEMS) modification of nanocellulose aerogel significantly improved mechanical strength from 0.0194 to 0.03614 N/mm². Treatment with 5 % TEMS reduced water absorption from 41.7 g/g to 11.3 g/g, enhancing hydrophobicity (water contact angle 136.21°) and shifting material preference away from water. TEMS-treated samples showed increased absorption capacities of up to 44.3 g/g for cooking oil and 57.6 g/g for motor oil, highlighting improved compatibility with non-polar substances. These advancements underscore a sustainable solution for oil spill remediation, offering significant potential in environmental conservation and recovery efforts.

Cotton-quality fibers from complexation between anionic and cationic cellulose nanoparticles

Natural polymers are attractive sustainable materials for production of fibers and composite materials. Cotton and flux are traditional plants used to produce textiles with comforting properties while technologies like Viscose, Lyocell and Ioncell-F allowed to extent fiber use into regenerated cellulose from wood. Neither natural nor man-made fibers completely satisfy the needs for cellulose based fabrics boosting development of new approaches to bring more sustainability into the fashion. Technologies like Spinnova are arising based on the spinning of mechanically pretreated cellulose materials with a lower environmental impact though challenged by the fiber quality and strength related to the inconsistency of the mechanical fibers. Nanoscaled cellulose is an excellent solution to improve the consistency of spin fibers, but charges introduced by traditional chemical treatments prevent rebuilding native hydrogen bonding and compromise the mechanical properties especially in wet conditions. We used nanocellulose with low surface charge isolated using reactive eutectic media to spin fibers able to restore the native hydrogen bonding and enable constitutional mechanical strength of cellulose. We performed un-optimized spinning to reveal the intrinsic properties of the fibers and confirmed the preserved strength of wet fibers compliant with the low surface charge enabling further engineering towards cotton-like fabric from wood.

One pot green process for facile fractionation of sorghum biomass to lignin, cellulose and hemicellulose nanoparticles using deep eutectic solvent

Complete valorization of lignocellulosic biomass is crucial for bio-based biorefineries to fulfil the circular bioeconomy concept. However, the existence of lignin carbohydrate complexes (LCC) in biomass hinders the simultaneous fractionation of biomass components, such as lignin, hemicellulose and cellulose, for subsequent biorefining processes. This study explores for the first time a novel approach tailored for the deconstruction of sorghum biomass components through efficient breakdown of LCC. Selective targeting of the major LCC linkages binding xylan and lignin was performed using an ultrasound-assisted deep eutectic solvent under mild treatment conditions. This process yielded a maximum cellulose content of 98.3 %, hemicellulose content of 95.2 %, and lignin content of 94.6 %, with the highest purities of 99.43 %, 96.71 %, and 98.12 %, respectively. FTIR, 2D-HSQC NMR and XRD analyses confirmed that most of the structural properties of lignin, hemicellulose, cellulose are retained. The lignocellulosic components were successfully valorised to cellulose, hemicellulose, and lignin nanoparticles with mean sizes of 64.5 ± 6 nm, 72.8 ± 4 nm and 57.2 ± 8 nm respectively, with good thermal stability. The proposed green process enables the complete utilization of agro-residue feedstock for the preparation of biomass-derived nanoparticles, thereby accelerating the economic and industrial prospects of bio-based biorefineries.

Cellulose binary coatings with spherical envelope structure via structure rearrangement in ball milling for integrated radiative cooling-electricity generation

Passive daytime radiative cooling is a zero-energy consumption cooling technology, which can dissipate heat to outer space via infrared radiation. Recently, coupling radiative cooling technology and thermoelectric devices to generate electricity has attracted much attention. However, existing radiative cooling integrated thermoelectric devices still suffer from low-temperature gradient and output voltage. Here, based on the Mie scattering and internal reflection enhancing principle, an impact-inducing geometry reconstruction approach was proposed to fabricate hierarchical nanostructured cellulosic coatings with good daytime cooling performance to achieve stable electricity generation function, which can be realized by using a scalable and facile wet ball milling technology. Guided by the theoretical simulations of the finite difference time domain method (FDTD), the cellulose and TiO2 nanoparticles can assemble into spherical envelope structured coatings drying by the shear, impact, and friction interaction in the ball milling process, dramatically enhancing the Mie scattering and internal reflection of coatings. The cellulosic coatings exhibit sunlight reflectivity of 0.962 and infrared emissivity of 0.94, resulting in a daytime radiative cooling efficiency of 5.9 °C under direct sunlight. Energy Plus stimulation demonstrated 35 % cooling energy and 468.9 kWh of cooling energy can be saved annually in China. Meanwhile, this cellulosic coating-based thermoelectric device can deliver a high voltage output of 150 mV under 1 Sun due to the strong bonding and high-temperature gradient formation (30 °C), which is higher than previous reports. This study will facilitate the development of sustainable power generation device for the goal of green future.

Cellulolytic characterization of the rumen-isolated Acinetobacter pittii ROBY and design of a potential controlled-release drug delivery system

A novel cellulolytic bacterial strain, ROBY, was isolated from a bovine rumen sample using the enrichment culture method. This isolate was found to be Acinetobacter pittii, with >99 % similarity according to 16S rRNA gene sequence analysis. The potential use of this strain in combination with doxorubicin (Dox)-integrated cellulose nanoparticles (Dox-CNPs) was evaluated as a proof-of-concept study for the further development of this approach as a novel controlled-release drug delivery strategy. The isolate can utilize CNPs as the sole carbon source for growth and degrade both Dox-CNPs and empty CNPs with high efficiency. Extracellular cellulases isolated from bacteria may also be used to trigger Dox release. The results also demonstrated that the release of Dox into the environment due to nanoparticle degradation in the samples incubated with Dox-CNPs significantly affected bacterial cell viability (∼75 % decrease), proving the release of Dox due to bacterial cellulase activity and suggesting the great potential of this approach for further development.

Interfacial Membranization of Regenerated Cellulose Nanoparticles and a Protein Renders Stable Water-in-Water Emulsion.

Pickering water-in-water (W/W) emulsions stabilized by biobased colloids are pertinent to engineering biomaterials with hierarchical and confined architectures. In this study, stable W/W emulsions are developed through membranization utilizing biopolymer structures formed by the adsorption of cellulose II nanospheres and a globular protein, bovine serum albumin (BSA), at droplet surfaces. The produced cellulose II nanospheres (NPcat, 63nm diameter) bearing a soft and highly accessible shell, endow rapid and significant binding (16mgcm- 2) with BSA. NPcat and BSA formed complexes that spontaneously stabilized liquid droplets, resulting in stable W/W emulsions. It is proposed that such a system is a versatile all-aqueous platform for encapsulation, (bio)catalysis, delivery, and synthetic cell mimetics.

Electrical conductivity of polyvinyl alcohol/carboxymethyl cellulose doped by zinc oxide and hematite nanoparticles for optoelectronics devices

This research explores polymer nanodielectrics, a category of materials where nanoceramic fillers are incorporated into polymers. These hybrid materials are gaining significant interest because of their tunable optical and electrical characterization, making them potentially well-suited for applications in flexible optoelectronic and organic electronic devices. Polyvinyl alcohol (PVA), Carboxymethyl cellulose (CMC), zinc oxide (ZnO), and hematite (Fe2O3) nanoparticles were utilized to fabricate PVA/CMC-ZnO/Fe2O3 films XRD analysis indicated a reduction in the crystalline character of the PVA/CMC blend following the doping of ZnO/Fe2O3 nanoparticles (NPs). FTIR data approved the complexation between the PVA/CMC blend and the ZnO/Fe2O3, leading to a decrease in intermolecular interactions within the polymeric matrix and coordination with the ZnO/Fe2O3. Electrical analysis obtained an enhancement in σac values with the increase of ZnO/Fe2O3 NPs concentration up to 30 min of laser ablation times The findings from this study suggest the promise of these materials for applications in high-performance batteries, supercapacitors, or other next-generation energy storage and conversion devices.

The affinity of cellulose nanoparticle toward hydrogel based on chitosan/tragacanth for radiation protection: Study of pulmonary damages on rats

AbstractIn order to overcome the harmful effects of radiation exposure on lung tissue in radiation therapy, a complete comparative analysis was performed between the injectable pure hydrogel and a novel composite hydrogel, taking into account the addition of cellulose nanoparticles in varying ratios. Initially, both chitosan and tragacanth hydrogels were chemically were modified, and then characterized by FTIR spectroscopy and rheology measurement. For in vivo studies, 42 rats were divided into seven groups. Rats in group 1, were not exposed to radiation, and no injection was done. Rats in group 2 were exposed to a radiation dose of 15 Gy without any injection. Rats in groups 3, 4, and 5 got injectable chitosan/ tragacanth hydrogel containing nanocellulose 25, 50, and 75 mg/kg BW, respectively, along with a radiation dose of 15 Gy. Rats in group 6 got a radiation dose of 15 Gy and an IP injection optimal dose of cellulose nanoparticle and PBS. Rat in group 7 got a radiation dose of 15 Gy and an IP injection of hydrogel containing only chitosan–tragacanth. The pathological results demonstrated that the 25 mg/kg BW dose of nanocellulose‐contained hydrogel possessed less inflammation, mucus secretion, bleeding in lung tissue, and air sac wall thickening than other groups. In addition, a biochemistry assessment was conducted by examining the activity of three enzymes of malondialdehyde (MDA), superoxide dismutase (SOD), and glutathione peroxide (GPx), which findings confirmed the hydrogel incorporated with 25 mg/kg BW dose of nanocellulose decreased cell death in a lung tissue damaged by radiation which was 52 IU/mL, 37 IU/mL, and 10 μM in comparison with 63 IU/mL, 40 IU/mL, and 1 μM for the control sample.

Challenges and Prospects of Applying Nanocellulose for the Conservation of Wooden Cultural Heritage—A Review

Nanocellulose is a nanostructured form of cellulose, which retains valuable properties of cellulose such as renewability, biodegradability, biocompatibility, nontoxicity, and sustainability and, due to its nano-sizes, acquires several useful features, such as low density, high aspect ratio and stiffness, a high specific surface area, easy processing and functionalisation, and good thermal stability. All these make it a highly versatile green nanomaterial for multiple applications, including the conservation of cultural heritage. This review provides the basic characteristics of all nanocellulose forms and their properties and presents the results of recent research on nanocellulose formulations applied for conserving historical artefacts made of wood and paper, discussing their effectiveness, advantages, and disadvantages. Pure nanocellulose proves particularly useful for conserving historical paper since it can form a durable, stable coating that consolidates the surface of a degraded object. However, it is not as effective for wood consolidation treatment due to its poor penetration into the wood structure. The research shows that this disadvantage can be overcome by various chemical modifications of the nanocellulose surface; owing to its specific chemistry, nanocellulose can be easily functionalised and, thus, enriched with the properties required for an effective wood consolidant. Moreover, combining nanocellulose with other agents can also improve its properties, adding new functionalities to the developed supramolecular systems that would address multiple needs of degraded artefacts. Since the broad use of nanocellulose in conservation practice depends on its properties, price, and availability, the development of new, effective, green, and industrial-scale production methods ensuring the manufacture of nanocellulose particles with standardised properties is necessary. Nanocellulose is an interesting and very promising solution for the conservation of cultural heritage artefacts made of paper and wood; however, further thorough interdisciplinary research is still necessary to devise new green methods of its production as well as develop new effective and sustainable nanocellulose-based conservation agents, which would replace synthetic, non-sustainable consolidants and enable proper conservation of historical objects of our cultural heritage.

Banana pseudo-stem and cattle manure for lactic acid production and the application of polylactic acid-cellulose silver nanoparticle-based nanocomposite films in food storage

Lactic acid is used in various industrial processes, including the production of emulsifiers, polymers, cosmetics, and pharmaceuticals. Fermentation of renewable biomass from natural sources has several advantages over costly chemical methods. Thermal and acidic pretreatments were used to improve the availability of sugars in the medium. Bacillus coagulans was isolated from the banana pseudostem; it was cultured with cattle manure-banana pseudostem for the improved production of lactic acid. Lactic acid production was high in the culture medium containing a 1:1 ratio of cow manure and banana pseudostem after 72 h of fermentation. After 24 h, lactic acid production was 19.4 ± 1.2 g/kg substrate, and it increased after 48 h (20.5 ± 0.1 g/kg substrate), and 72 h (26.3 ± 0.1 g/kg substrate). Lactic acid synthesized by B. coagulans was purified and used for the synthesis of polylactic acid. Polylactic acid was used for the fabrication of composite materials with cellulose and silver nanoparticles. The scanning electron microscopy image showed a smooth surface with uniform particle sizes. The fabricated nanoparticles showed antibacterial activity against food spoilage bacteria. The film was used to pack goat meat and chicken meat. The fabricated film reduced the bacterial load in the stored meat and improved food quality.

Enhanced adsorption of lead (II) ions onto cellulose nanoparticles/chitosan composite based on loofah sponge: kinetic and thermodynamic studies

AbstractThe purpose of this work is to study the efficiency of lead ions removal via adsorption onto created solid nanomaterials. Three solid adsorbents were synthesized as cellulose nanoparticles (CN) extracted from plant loofah sponge using alkali treatment and acid hydrolysis techniques, chitosan beads (CZ), and cellulose nanoparticles/chitosan beads composite (CZC). The generated solid adsorbents were investigated using TGA, N2 adsorption/desorption, ATR-FTIR spectroscopy, SEM, TEM, XRD, and pHPZC. Based on our findings, CZC had a pHPZC of 7.2, a larger specific surface area (645.3 m2/g), and a total pore volume (0.372 cm3/g). The batch adsorption of lead ions was well-fitted by pseudo-second order, Elovich, Langmuir, Temkin, and Dubinin-Radushkevich on all the samples. Cellulose nanoparticles/chitosan composite had the highest Langmuir adsorption capacity (221.104 mg/g) at 47°C, 120 min as shaking time, 2 g/L as adsorbent dose, and pH 6.5. Nitric acid had the highest desorption percentage (92%). The thermodynamic investigation revealed that lead ion adsorption is endothermic, favorable, spontaneous, and physisorption. Our findings showed that CZC has a high adsorption capacity and rapid kinetics, indicating its potential for employment in water treatment.

Assessment of crack suppression in glass/epoxy curved laminates by incorporating micro and nanofillers

AbstractThe design of structures with a large radius of curvature is challenging because fiber‐reinforced composite materials have low resistance to delamination in the direction perpendicular to their thickness. These structures are commonly found in a wide variety of structural components that are used in the wind turbine and aviation industries. The objective of this study is to conduct an experimental investigation into the efficacy of incorporating milled glass fiber, cellulose nanoparticles, and carbon nanoparticles as fillers into an epoxy matrix to improve the resistance to delamination of glass/epoxy curved laminates and thereby inhibit crack growth. In contrast to the baseline samples, curved samples containing 3% cellulose nanoparticles demonstrated enhanced curved beam strength and interlaminar tensile strength by 4.95% and 3.82%, respectively. Additionally, filler‐loaded samples exhibited reduced delamination and fracture propagation damage compared with baseline samples. The adhesion between the epoxy matrix and infill was investigated by means of Fourier transform infrared analysis. In addition, live photographic images and fractured micrographs were correlated with mechanical findings in order to assess delamination suppression and damage processes in both the arm and arc directions.

Solvent-Dependent Dynamics of Cellulose Nanocrystals in Process-Relevant Flow Fields.

Flow-assisted alignment of anisotropic nanoparticles is a promising route for the bottom-up assembly of advanced materials with tunable properties. While aligning processes could be optimized by controlling factors such as solvent viscosity, flow deformation, and the structure of the particles themselves, it is necessary to understand the relationship between these factors and their effect on the final orientation. In this study, we investigated the flow of surface-charged cellulose nanocrystals (CNCs) with the shape of a rigid rod dispersed in water and propylene glycol (PG) in an isotropic tactoid state. In situ scanning small-angle X-ray scattering (SAXS) and rheo-optical flow-stop experiments were used to quantify the dynamics, orientation, and structure of the assigned system at the nanometer scale. The effects of both shear and extensional flow fields were revealed in a single experiment by using a flow-focusing channel geometry, which was used as a model flow for nanomaterial assembly. Due to the higher solvent viscosity, CNCs in PG showed much slower Brownian dynamics than CNCs in water and thus could be aligned at lower deformation rates. Moreover, CNCs in PG also formed a characteristic tactoid structure but with less ordering than CNCs in water owing to weaker electrostatic interactions. The results indicate that CNCs in water stay assembled in the mesoscale structure at moderate deformation rates but are broken up at higher flow rates, enhancing rotary diffusion and leading to lower overall alignment. Albeit being a study of cellulose nanoparticles, the fundamental interplay between imposed flow fields, Brownian motion, and electrostatic interactions likely apply to many other anisotropic colloidal systems.

An experimental investigation of the convective heat transfer augmentation in U-bend double pipe heat exchanger using water-MgO-Cmc fluid

One of the major problems of using nanofluids in heat exchange applications is the forming and deposition of nanoparticles on the inner surface of the heat exchanger. In this paper, Water-Cmc fluid is used as a surfactant for nanoparticles to prevent deposition and congregation. The pressure drops and heat transfer in U-bend double pipe heat exchanger based on water-MgO-Cmc fluid, are examined. Nanoparticles of Magnesium Oxide (MgO) and Carboxymethyl Cellulose (Cmc) are used with pure water as a base fluid. The experimental rig and procedures are designed to facilitate various operational conditions such as flow rate, volume concentration of MgO particles and weight concentration of Cmc particles. Furthermore, convective heat transfer coefficient, heat exchanger effectiveness, pressure drop, friction factor, under different conditions, are measured. The results demonstrate convective heat transfer coefficient of U-bend double pipe heat exchangers is enhanced by 35% for 1 MgO vol.% and 0.2 Cmc wt.% compared to base fluid (Water-Cmc). It is concluded that pressure drops are directly proportion to the increase of MgO nanoparticles at same Cmc concentration by 23% at 0.2 wt.%. Whilst, friction factor of the system is inversely proportion to the increase of volumetric flow rate of water-MgO-Cmc fluid. An increase in MgO nanoparticle concentration increases the friction factor, hence maximum friction factor enhancement by 38% for MgO concentration of 1 vol.%. The effectiveness of heat exchanger is slightly increased by 8% with increase of MgO concentration and flow rate. Finally, thermo-physical characteristics of water-MgO-Cmc fluid at various temperatures, are measured

Hierarchical Design of Tissue-Mimetic Fibrillar Hydrogel Scaffolds.

Most tissues of the human body present hierarchical fibrillar extracellular matrices (ECMs) that have a strong influence over their physicochemical properties and biological behavior. Of great interest is the introduction of this fibrillar structure to hydrogels, particularly due to the water-rich composition, cytocompatibility, and tunable properties of this class of biomaterials. Here, the main bottom-up fabrication strategies for the design and production of hierarchical biomimetic fibrillar hydrogels and their most representative applications in the fields of tissue engineering and regenerative medicine are reviewed. For example, the controlled assembly/arrangement of peptides, polymeric micelles, cellulose nanoparticles (NPs), and magnetically responsive nanostructures, among others, into fibrillar hydrogels is discussed, as well as their potential use as fibrillar-like hydrogels (e.g., those from cellulose NPs) with key biofunctionalities such as electrical conductivity or remote stimulation. Finally, the major remaining barriers to the clinical translation of fibrillar hydrogels and potential future directions of research in this field are discussed.

Enhancing Mechanical and Antimicrobial Properties of Dialdehyde Cellulose-Silver Nanoparticle Composites through Ammoniated Nanocellulose Modification.

Given the widespread prevalence of viruses, there is an escalating demand for antimicrobial composites. Although the composite of dialdehyde cellulose and silver nanoparticles (DAC@Ag1) exhibits excellent antibacterial properties, its weak mechanical characteristics hinder its practical applicability. To address this limitation, cellulose nanofibers (CNFs) were initially ammoniated to yield N-CNF, which was subsequently incorporated into DAC@Ag1 as an enhancer, forming DAC@Ag1/N-CNF. We systematically investigated the optimal amount of N-CNF and characterized the DAC@Ag1/N-CNF using FT-IR, XPS, and XRD analyses to evaluate its additional properties. Notably, the optimal mass ratio of N-CNF to DAC@Ag1 was found to be 5:5, resulting in a substantial enhancement in mechanical properties, with a 139.8% increase in tensile elongation and a 33.1% increase in strength, reaching 10% and 125.24 MPa, respectively, compared to DAC@Ag1 alone. Furthermore, the inhibition zones against Escherichia coli and Staphylococcus aureus were significantly expanded to 7.9 mm and 15.9 mm, respectively, surpassing those of DAC@Ag1 alone by 154.8% and 467.9%, indicating remarkable improvements in antimicrobial efficacy. Mechanism analysis highlighted synergistic effects from chemical covalent bonding and hydrogen bonding in the DAC@Ag1/N-CNF, enhancing the mechanical and antimicrobial properties significantly. The addition of N-CNF markedly augmented the properties of the composite film, thereby facilitating its broader application in the antimicrobial field.

Effects of chemical treatments on morphological, physical and chemical properties of okra bast fibers

In this study, bast fibers have been obtained from okra (Abelmoschus esculentus) plant stems via biological degumming process. The obtained fibers were subjected to some textile pretreatment processes such as scouring, alkalizing, oxygen bleaching and chlorine bleaching which are also utilized in cellulose nanoparticle production. Effects of these processes on their physical and chemical characteristics have been investigated and statistically analyzed. Treatments have been found to statistically affect physical properties of the fibers. They led to decrease in fiber linear density but increase in moisture content and water absorption capacity. Linear density reduction took place by fibrillation and elimination of impurities. Fibrillation has been evidenced by microscopy images. Prolonged submerging resulted in increment in water absorption. FT-IR spectra, SEM images and mass loss analysis present evidence for removal of lignin, hemicelluloses and vaxes upon chemical treatments. The ranges of the linear density, moisture content and water absorption of okra bast fibers are 6.3-20.1 tex, 2.9-6.0%, and 5.80 g/g to 11.8 g/g, respectively. Properties of okra bast fibers show similarities to conventional bast fibers such as flax, hemp and jute.