Cellulose Nanoparticles Research Articles

A molecular imprinting electrochemical sensor for detection of anticancer drug amsacrine

PurposeThe purpose of this study is to develop a molecular imprinting electrochemical sensor for the specific detection of the anticancer drug amsacrine. The sensor used a composite of bacterial cellulose (BC) and silver nanoparticles (AgNPs) as a platform for the immobilization of a molecularly imprinted polymer (MIP) film. The main objective was to enhance the electrochemical properties of the sensor and achieve a high level of selectivity and sensitivity toward amsacrine molecules in complex biological samples.Design/methodology/approachThe composite of BC-AgNPs was synthesized and characterized using FTIR, XRD and SEM techniques. The MIP film was molecularly imprinted to selectively bind amsacrine molecules. Electrochemical characterization, including cyclic voltammetry and electrochemical impedance spectroscopy, was performed to evaluate the modified electrode’s conductivity and electron transfer compared to the bare glassy carbon electrode (GCE). Differential pulse voltammetry was used for quantitative detection of amsacrine in the concentration range of 30–110 µM.FindingsThe developed molecular imprinting electrochemical sensor demonstrated significant improvements in conductivity and electron transfer compared to the bare GCE. The sensor exhibited a linear response to amsacrine concentrations between 30 and 110 µM, with a low limit of detection of 1.51 µM. The electrochemical response of the sensor showed remarkable changes before and after amsacrine binding, indicating the successful imprinting of amsacrine in the MIP film. The sensor displayed excellent selectivity for amsacrine in the presence of interfering substances, and it exhibited good stability and reproducibility.Originality/valueThis study presents a novel molecular imprinting electrochemical sensor design using a composite of BC and AgNPs as a platform for MIP film immobilization. The incorporation of BC-AgNPs improved the sensor’s electrochemical properties, leading to enhanced sensitivity and selectivity for amsacrine detection. The successful imprinting of amsacrine in the MIP film contributes to the sensor's specificity. The sensor's ability to detect amsacrine in a concentration range relevant to anticancer therapy and its excellent performance in complex sample matrices add significant value to the field of electrochemical sensing for pharmaceutical analysis.

Nanocomposite Based on Bacterial Cellulose and Silver Nanoparticles Improve Wound Healing Without Exhibiting Toxic Effect

Wound healing is an important and complex process, containing a multifaceted process governed by sequential yet overlapping phases. Certain treatments can optimize local physiological conditions and improve wound healing. Silver nanoparticles (AgNP) are widely known for their antimicrobial activity. On the other hand, bacterial cellulose (BC) films have been used as a dressing that temporarily substitutes the skin, offering many advantages in optimizing wound healing, in addition to being highly biocompatible. Considering the promising activities of AgNP and BC films, the present study aimed to evaluate the wound healing activity in Wistar Hannover rats using a nanocomposite based on bacterial cellulose containing AgNP (AgBC). In a period of 21 days, its influence on the wound area, microbial growth, histopathological parameters, and collagen content were analyzed. In addition, toxicity indicators were assessed, such as weight gain, water consumption, and creatinine and alanine transaminase levels. After 14 days of injury, the animals treated with AgBC showed a significant increase in wound contraction. The treatment with AgBC significantly reduced the number of microbial colonies compared to other treatments in the first 48 h after the injury. At the end of the 21 experimental days, an average wound contraction rate greater than 97 % in relation to the initial area was observed, in addition to a significant increase in the amount of collagen fibers at the edge of the wounds, lower scores of necrosis, angiogenesis and inflammation, associated with no systemic toxicity. Therefore, it is concluded that the combination of preexisting products to form a new nanocomposite based on BC and AgNP amplified the biological activity of these products, increasing the effectiveness of wound healing and minimizing possible toxic effects of silver.

Ultrasonication-induced re-dispersion of freeze-dried cellulose nanoparticles for improving strength and durability of PAN polymer matrix

Cellulose nanocrystals (CNCs) have acquired considerable attention owing to their noteworthy properties, including high crystallinity, biodegradability, high specific surface area, and excellent mechanical characteristics that alter the inherent features of the polymer matrix upon reinforcement. Typically, CNCs undergo freeze-drying or spray-drying to facilitate handling and dispersion in a hydrophobic polymer medium. Unfortunately, these drying procedures compromise the intrinsic nano-scale properties of CNCs. Therefore, achieving a uniform re-dispersion of dried CNCs is imperative to attain the desired characteristics in the polymer composite. This study specifically focuses on achieving a homogeneous re-dispersion of freeze-dried CNCs within a waste polyacrylonitrile (PAN) matrix through a simple ultrasonication treatment. The enhanced mechanical properties of the PAN polymer matrix validate the impact of ultrasound energy on re-dispersing CNCs. A noticeable improvement in the tensile properties of the composite polymer film is observed when CNC particles are well-dispersed in the PAN matrix. This observation is substantiated through SEM imaging, XRD, and FTIR data of both neat PAN and PAN–CNC composite films. The results affirm that particle dispersion plays a crucial role in augmenting the tensile properties of PAN composite films.

Bio-study: Modeling of natural nanomolecules as a nanocarrier surface for antioxidant and glucose biosensor

The nature of nano molecules as a self-assembled nanocomposite surface depends on the nanoparticles of sodium butyrate, cellulose, and pycnogenol; the synthesis is achieved via precipitation and grinding methods. The excellent functionalized surface of nanocomposite (NCP) enables the loading of the selected drugs, where the efficiency of the NCP surface arrived at 92.2 %. The electrochemical behavior emphasized the success of a functionalized NCP surface for incorporation with drugs for the drug delivery system, the results of cytotoxicity detect the effect of NCP on the mouse normal liver (BNL) cells, where the high and low concentrations on the BNL cells have a safe dose. Cell viability with BNL cells was reported at 101.8 % with10 μL and 100.12 % with 100 μL, the interaction between the NCP and the human serum albumin (HSA) at room temperature. The low interaction rate with the glutamate and increased binding with the oxidized glutathione disulfide (GSSG) and reduced glutathione (SGH) reflect the antioxidant activity of NCP. The strong binding of NCP with biomolecules such as glucose is referred to as the biosensor property. The results recommend that NCP is an excellent nanocarrier for drug delivery and glucose biosensors for diabetes.

Cascade fractionation of bamboo shoot shells into high-yield xylose, easily digestible cellulose and high-quality lignin nanoparticles by tailored catalytic hydrothermal–hydrated alkaline deep eutectic solvents pretreatment

The high complexity and compactness of inherent structure in lignocellulosic materials (LCM) leads to the difficulty of fractionation and conversion of its major component, which is the key obstacle limiting the value-added utilization of LCM. In this work, a cascade fractionation strategy, coupling catalytic hydrothermal pretreatment (CHTP, choline chloride: ethylene glycol: AlCl3, ChCl/ EG/ AlCl3) with hydrated alkaline deep eutectic solvent (HADES, triethylbenzyl ammonium chloride/ethanolamine, TEBAC/EM) treatment, was proposed to fractionate dendrocalamus latiftorus munro shoot shells (DLMSS). The results showed that considerably high hemicelluloses removal (94.57 %) and xylose yield (90.73 %) were achieved by the first step (CHTP, 160 °C, 1 h, 2 % of catalyst loading). The cascaded HADES treatment realized 90.25 % delignification ratio under the optimal conditions (120 °C, 3 h, 75 % of ADES loading), and the obtained residue could be easily converted into high-yield (93.35 %) of glucose via enzymatic saccharification. In addition, multiple enrichment cycle strategy (MECS) was performed to facilitate the recyclability of the HADES. The results showed that the enriched lignin recovered by MECS was activated by in-situ demethoxylation reaction. And such lignin fraction could be easily assembled into homogeneous lignin nanoparticles (LNPs, ∼31.51 nm in diameter) by simple sonication. Meanwhile, the MECS signally energized the antioxidant activity of the enriched lignin. Based on the high-efficiency cascade fractionation with the coupled CHTP-HADES fractionation strategy, it will observably boost the effectiveness and scalability of the advanced biorefinery strategy.

Use of carboxymethyl cellulose, Klucel G, gum Arabic and zinc oxide nanoparticles nanocomposite as strength agents for inked papyrus

Purpose The purpose of this study is to detect the effect of some natural cellulosic polymers in their nano forms with the addition of zinc oxide nanoparticles on restoring the lost mechanical strength of degraded papyrus without any harmful effects on the inks. Design/methodology/approach In the current study, the USB digital microscopy, scanning electron microscope, measurement of mechanical properties (tensile and elongation), pH measurement, color change and infrared spectroscopy were undertaken for the samples before and after treatment and aging. Findings In the current study, the USB digital microscopy, scanning electron microscope, measurement of mechanical properties (tensile and elongation), pH measurement, color change and infrared spectroscopy were undertaken for the samples before and after treatment and aging. Originality/value The effect of strengthening materials was studied on cellulose and carbon ink, which makes this study closer to reality as the manuscript is the consistent structure of cellulose and inks, whereas most of the literature stated the impact of consolidation materials on the strengthening the cellulosic supports without attention to their impact on inks.

Gamma Ray-Induced Changes in Polyvinyl Alcohol/Carboxymethyl Cellulose/Cadmium Selenide Nanocomposite Films: Optical Analysis for Optoelectronic Devices

In order to create nanocomposite films (NC) of polyvinyl alcohol, carboxymethyl cellulose and cadmium selenide nanoparticles (PVA/CMC/CdSe), thermolysis and ex-situ casting techniques were used. The microstructure and shape of the CdSe nanoparticles (NP) were characterized with the Rietveld method and transmission electron microscopy (TEM). Rietveld refinement of the x-ray data showed that the prepared CdSe NP had the cubic zinc blend structure with a lattice parameter 6.057 Å. The TEM showed the formation of the dotted shape of CdSe with a particle size around 2 nm, confirming the quantum dot size of the mother phase CdSe. Samples from the prepared PVA/CMC/CdSe films were irradiated with γ radiation doses of 20−150 kGy. The resultant effects of the γ ray irradiation on the optical and color properties of the prepared films were investigated using UV–vis spectroscopy and the International Commission on Illumination (CIE) color difference technique. When the γ dose was increased to 150 kGy, the maximum dose used, the direct and indirect optical band gaps (Eg) decreased. We attribute this decrease to the domination of crosslinking that destroyed the ordered structure and thus increased the amorphous regions. In addition, we used the optical dielectric loss (ε”) to identify the type of microelectronic transition for the PVA/CMC/CdSe NC samples, which was found to be a direct allowed transition. The effect of γ ray irradiation on the absorbance, extinction coefficient, refractive index, dielectric parameters and optical conductivity of the NC samples were studied. The enhancement in the optical properties indicated that the γ radiation is a useful tool that allows the use of the resulting PVA/CMC/CdSe NC in optoelectronic devices. Finally, the color differences between the pristine and irradiated films were estimated. The irradiated PVA/CMC/CdSe NC film exhibited significant color differences relative to the pristine films.

The Study of Increasing Shelf-Life of Meat by Using Nanocellulose-Chitosan Composite Film Obtained from Agricultural By-Products

Background: This research was conducted to design a bionanocomposite film for meat packaging with regard to environmental aspects. Methods: Cellulose nanoparticles (CNPs) were used as nano-reinforcing factors were generated using non-edible agricultural by-products. The bionanocomposite film which was recently developed contains CNPs and chitosan (CS); then, the nanocomposites were explored via SEM, FTIR, agar disc diffusion tests and X-ray crystallography (XRD). Finally, the film was used to pack meat pieces. Results: Investigation of the morphological and physical reports of the solid films indicated that the CNPs are well scattered in bionanocomposite film. The addition of CNPs within a CS improved Young’s modulus by about 12135% and the tensile strength by 583%. In addition, XRD photographs indicated that CNP peak appeared after being added to CS context. Antimicrobial activity demonstrated that nanocomposites exerted restrictive effect on Escherichia coli, Pseudomonas aeruginosa, Listeria monocytogenes, and Staphylococcus aureus bacteria. Using CS-nanocellulose composite as a packing film on meat surface leads to decreasing bacteria growth compared to nylon packing materials at 4˚C after 8 days of storage. Conclusion: Findings indicated that the recently designed CNP-CS films are a better replacement for common food packaging substances.

Mechanical Properties of Ice Composites Reinforced with Cellulose Microfibers and Nanoparticles

Mechanical Properties of Ice Composites Reinforced with Cellulose Microfibers and Nanoparticles

Cellulose based adsorbent for cationic methylene blue dye removal

New chemically amended (sodium periodate cellulose nanoparticle (NaIO4-CNP) adsorbent material was synthesized from dried fibers of cotton. The synthesized NaIO4-CNP adsorbent material was characterized for functional groups, crystallite size, surface morphology, morphological structure, and particle size) by using Fourier transform infrared (FT-IR), X-ray diffraction (XRD), Scanning electron microscope (SEM), Transmission electron microscope (TEM) and Brunauer Emmett Teller (BET), instruments, respectively. Then it was investigated to eliminate methylene blue (MB) dye from textile secondary runoff wastewater (SERWW). The physicochemical properties of textile SERWW including organic matter (OM) and inorganic nutrients on the removal capabilities of MB dye was investigated. The adsorption mechanism study was shown that Freundlich isotherm fitted with a maximum removal capability (qmax) of 62.91 mg g−1. The elimination kinetic mechanism fits well to pseudo-second-order and its data recommended the materials (NaIO4-CNP) are effective for wastewater treatment. The MB dye uptake capacities were influenced by the presence of positively charged ions. The NaIO4-CNP adsorbent indicated excellent reproducibility considered as capable adsorption resources to eliminate MB dye from textile SERWW.

Extraction and characterization of cellulose nanoparticles from palm kernel meal for potential application in active food packaging

The research aimed to explore the potential of palm kernel meal (PKM) as a sustainable source of cellulose nanoparticles (CNPs) for active food packaging. The CNPs were isolated using a combination of chemical techniques, such as alkaline treatment, bleaching, and acid hydrolysis. The characterization of the CNPs was analysed using various techniques, including scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and UV–visible spectroscopy. The findings revealed that chemical processing effectively removed lignin and hemicellulose from PKM. The SEM morphology confirmed the separation of the CNPs, resulting in the production of 40–100 nm spherical cellulose nanoparticles, while XRD and FTIR analyses confirmed their purity and composition. Moreover, the UV–visible spectroscopy exhibited high transmittance rates, indicating the potential of CNPs as reinforcing agents for polymer matrices. The significance of utilising PKM as a valuable fibre source for extracting CNPs can be recommended for developing active food packaging.

Application of magnetic dispersive solid phase extraction combined with solidification of floating organic droplet-based dispersive liquid–liquid microextraction and GC-MS in the extraction and determination of polycyclic aromatic hydrocarbons in honey

A magnetic dispersive solid phase extraction method combined with solidification of floating organic droplet-based dispersive liquid–liquid microextraction has been validated for the extraction of polycyclic aromatic hydrocarbons from honey samples. For this purpose, a carbonised cellulose–ferromagnetic nanocomposite was used as a sorbent through the magnetic dispersive solid phase extraction. For preparation of the sorbent, first, carbonised cellulose nanoparticles were created by treating cellulose filter paper with concentrated solution of sulfuric acid. Then, the prepared nanoparticles were loaded onto Fe3O4 nanoparticles through coprecipitation. In the extraction process, first, a few mg of the sorbent was added to the diluted honey solution and dispersed in it using vortex agitation. The particles were then separated and the adsorbed analytes were eluted with an organic solvent. The eluent was taken and after mixing with a water–immiscible extraction solvent was used in the following solidification of floating organic droplet-based dispersive liquid–liquid microextraction procedure. By performing the extraction process under the obtained optimum conditions, low limits of detection (0.08–0.17 ng g−1) and quantification (0.27–0.57 ng g−1), satisfactory precision (relative standard deviations ≤ 5.0%), and wide linear range (0.57–500 ng g−1) with great coefficients of determination (r2≥ 0.9986) were obtained.

Direct utilization of cationic cellulose nanoparticles derived from maize-stalk parenchyma for intensifying mechanical properties and antibacterial activity in non-refined pulp paper

In recent years, an increasing focus has been placed on the mitigation of carbon dioxide emissions, underscoring the significance of the sustainable energy-conservation industry as a prominent and consequential field of development. As an energy-intensive procedure within the papermaking sector, the process of pulp-fiber beating necessitates an imperative exploration of alternative approaches aimed at mitigating energy consumption. This study has synthesized renewable cationic cellulose nanoparticles (CCNPs) extracted from the parenchymal cells of maize stalk pith. The objective is to demonstrate their viability as a reinforcing additive for paper sheets, thereby reducing the reliance on conventional beating processes. The results showed that CCNPs were prone to augment the physical strength of bleached papers, compared with unbleached papers. The inclusion of 9% CCNPs led to a remarkable 163.5% and 140.0% increase in tear and tensile indexes for bleached Eucalyptus paper, respectively. Incorporating CCNPs into non-refined paper yields physical traits akin to wood pulp paper beaten over 40 °SR. The CCNP-strengthened handsheets exhibited superior tensile and tear index in comparison to commercial dry strength additives such as cationic starch (CS) and cationic polyacrylamide (CPAM). Additionally, at 80 μg/ml concentration, E-B-9 displayed significant bactericidal effectiveness, achieving an impressive 97% reduction in Escherichia coli. This notable outcome is attributed to the presence of quaternary ammonium salt moieties in the formulation. This investigation introduces a promising approach where in the utilization of CCNP as an innovative multifunctional agent for paper holds the potential to enhance paper performance and concurrently reduce production costs.

Impact of gamma radiation on the linear and nonlinear optical properties of PVA/CMC/ZnS-NiO nanocomposite films

In the present study, we used the sol-gel and ex-situ casting techniques to prepare a nanocomposite (NC) of polyvinyl alcohol (PVA), carboxymethyl cellulose (CMC), Zinc sulfide (ZnS) and nickel oxide (NiO) nanoparticles (NP). The Rietveld modification of XRD records indicated that the prepared ZnS and NiO had a nanonature of average particle size 4 and 18 nm, respectively. Samples from the prepared PVA/CMC/ZnS-NiO NC were irradiated with γ doses ranging from 15 to 90 kGy. The resulting impact of γ radiation on the optical properties of the NC films was studied using ultraviolet spectroscopy and the International Commission on Illumination (CIE) color difference technique. When the γ dose increased up to 90 kGy, both the direct and indirect bandgaps decreased. The Urbach energy exhibited a reverse trend. This could be attributable to the dominance of chain crosslinks. In addition, we used the optical dielectric loss (ε″ ) to identify the type of microelectronic transition for the NC samples, which was found to be a direct allowed transition. Also, the impact of γ radiation on the absorbance, extinction coefficient, refractive index, optical dielectric parameters, optical conductivity and the nonlinear parameters of the NC films were investigated. Moreover, the changes in color between the irradiated samples and pristine were determined. The pristine NC film was colorless. It showed permanent color changes upon the γ irradiation. The induced modifications in the optical properties indicated that the prepared PVA/CMC/ZnS-NiO NC can be suitable candidate for the application of in optoelectronic devices.

Fenton-like oxidation of pinewood to produce cellulose nanoparticles in one pot treatment

Fenton-like oxidation of pinewood to produce cellulose nanoparticles in one pot treatment

Splitting and authentication of the newest retrieved cellulose-rich organic fiber from the exterior layer of Bangladeshi palmyra seed sprouts.

The upward trajectory of plant-based cellulosic fiber originating from renewable sources is crucial to visualizing a sustainable future. This article reports a freshly developed and distinctive natural fiber derived from palmyra seed sprout fibers (PSSF) by employing hot water retting. The hygroscopic behavior (moisture regain and content) density, bundle fiber strength, burning behavior, and chemical composition of the fiber are determined using ASTM D1909, ASTM D2654, ASTM D891-18, ASTM D1445, ASTM D1230-22, and TAPPI standards, respectively. Crystallinity, fiber configuration, biological groups, flame behavior, and temperature responsiveness are determined using XRD, SEM, FTIR, burn test, and TGA tests. The reported cellulose-rich textile fiber that contains 64% cellulose with average moisture recovery and content percentages of 14.38% and 12.56%, respectively. The envisioned fiber has an average tensile strength of 11.05 g tex-1, a breaking extension of 1.8 mm, and a crystallinity of 38%. The highest temperature at which the fiber begins to deteriorate is 474 °C. This noble fiber can be utilized to create biological materials, cellulose nanoparticles, composites reinforced with fibers, and more.

Thin free-standing liquid films manipulation: device design to turn on/off gravity in flow regimes for thickness map control and for material structuring.

The manipulation and control of free-standing liquid film drainage dynamics is of paramount importance in many technological fields and related products, ranging from liquid lenses to liquid foams and 2D structures. In this context, we theoretically design and introduce a device where we can reversibly drive flow regime switch between viscous-capillary and viscous-gravity in a thin free-standing liquid film by altering its shape, allowing us to manipulate and stabilize the film thickness over time. The device, which mainly consists of a syringe pump, a pressure transducer, and a 3D-printed cylinder, is coupled with a digital holography setup to measure, in real time, the evolution of the local film thickness map, revealing characteristic features of viscous-capillary and viscous-gravity driven drainage regimes. By using polyvinyl alcohol/water concentrated solutions, we are also able to produce viscoelastic membranes after manipulation and water evaporation, which presents manipulation history-dependent geometrical properties. Furthermore, using a system composed of carboxymethyl cellulose, water, and rod-like zinc oxide nanoparticles, we show a clear effect of film manipulation on particle rearrangement. We believe this device could represent a starting point for the development of a useful and practical tool to study thin liquid film dynamics and to produce novel (patterned) 2D structures for the numerous scientific and technical fields where they are of use.

Enzymatic approaches for diversifying bioproducts from cellulosic biomass.

Cellulosic biomass is the most abundantly available natural carbon-based renewable resource on Earth. Its widespread availability, combined with rising awareness, evolving policies, and changing regulations supporting sustainable practices, has propelled its role as a crucial renewable feedstock to meet the escalating demand for eco-friendly and renewable materials, chemicals, and fuels. Initially, biorefinery models using cellulosic biomass had focused on single-product platform, primarily monomeric sugars for biofuel. However, since the launch of the first pioneering cellulosic plants in 2014, these models have undergone significant revisions to adapt their biomass upgrading strategy. These changes aim to diversify the bioproduct portfolio and improve the revenue streams of cellulosic biomass biorefineries. Within this area of research and development, enzyme-based technologies can play a significant role by contributing to eco-design in producing and creating innovative bioproducts. This Feature Article highlights our strategies and recent progress in utilizing the biological diversity and inherent selectivity of enzymes to develop and continuously optimize sustainable enzyme-based technologies with distinct application approaches. We have advanced technologies for standalone platforms, which produce various forms of cellulose nanomaterials engineered with customized and enhanced properties and high yields. Additionally, we have tailored technologies for integration within a biorefinery concept. This biorefinery approach prioritizes designing tailored processes to establish bionanomaterials, such as cellulose and lignin nanoparticles, and bioactive molecules as part of a new multi-bioproduct platform for cellulosic biomass biorefineries. These innovations expand the range of bioproducts that can be produced from cellulosic biomass, transcending the conventional focus on monomeric sugars for biofuel production to include biomaterials biorefinery. This shift thereby contributes to strengthening the Bioeconomy strategy and supporting the achievement of several Sustainable Development Goals (SDGs) of the 2030 Agenda for Sustainable Development.

Bacterial cellulose nanoparticles as a sustainable drug delivery platform for protein-based therapeutics

BCNPs prepared from a kombucha co-culture can serve as a sustainable delivery platform for protein-based drugs. The amorphous nanoparticles form a mesh-like fibrillar network that is thermally stable and can be produced at scale.

Preparation of polylactic acid reinforced with cellulose nanofibers toward photochromic self-healing adhesive for anti-counterfeiting applications

There are a number of drawbacks with photochromic adhesives, including their poor durability, high price tag, and lackluster performance. On the other hand, self-healable adhesives have shown to be durable and robust than conventional alternatives. Hydrogel adhesives that change color in response to ultraviolet light were created for usage in self-healable authenticating stamps. In this context, a combination of cellulose nanofibers (CNFs), polylactic acid (PLA) and nanoparticles of lanthanide aluminate (NLA) were prepared to generate an organic-inorganic hybrid hydrogel adhesive with self-healing properties. NLA agglomerates were avoided due to the use of CNFs as a nanofiller and dispersion agent. Colorless stamps require that NLA to be dispersed consistently in the CNFs/PLA hydrogel without clumping. This film becomes green when irradiated with ultraviolet, as indicated by luminescence spectra and CIE Lab coordinates. When illuminated at 365 nm, the paper sheets emitted light with a wavelength of 519 nm. The morphologies of prints were analyzed by different analytical methods. Diameter measurements from a transmission electron microscope (TEM) of the synthesized NLA ranged from 5 to 9 nm, whereas CNFs displayed diameters of 40–60 nm. The current NLA@CNFs/PLA hydrogel presents a reliable anti-counterfeiting solution for various authenticating products.