Nanocellulose Membranes Research Articles

High-permeance nanocellulose/ZnO hybrid membranes with photo-induced anti-fouling performance for wastewater purification

A hybrid ultrafiltration membrane based on nanocellulose and zinc oxide nanoparticles (ZnO NPs) was prepared by simple layered filtration without any chemical modification. Microscopic morphology analysis showed that the loading ZnO NPs significantly increased the membrane roughness, and wettability test demonstrated that the membrane surface possessed underwater superoleophobicity. Due to the “puncture effect” of the embedded ZnO NPs, abundant nanochannels were formed in the nanocellulose membrane and the highest water permeance of 5439.7 L·m−2·h−1·bar−1 was achieved. The hybrid membranes exhibited high rejection of nanoparticles larger than 20 nm and macromolecules with molecular weights higher than 100 kDa. Furthermore, ZnO NPs significantly improved the wet tensile strength of membrane. The hybrid membranes achieved high separation efficiency of nano-sized emulsions via size exclusion and demulsification effect, as well as the efficient removal of organic dyes and antibiotics via filtration-adsorption. The combination of underwater superoleophobicity and photocatalytic self-cleaning performance effectively solved the problem of a sharp decrease in permeance caused by oil contamination. This type of nanocellulose/ZnO hybrid membrane, which integrates high permeance, high filtration accuracy, and photocatalytic anti-fouling performance in one design, offers an innovative approach to the preparation of nanocellulose membranes for the treatment of organic wastewater.

A study on preparation of low-cost environment-friendly self-assembled nanocellulose membrane from waste paper

In the context of green development, different types of waste paper were used in this study to prepare environment-friendly nanocellulose membrane by using different pretreatment processes. The results showed that all nanocellulose membranes had a novel microscopic composite morphology: nanocellulose fibers in the middle were tightly arranged and had a certain direction, while nanocellulose fibers at the edge were arranged randomly. Moreover, the type of waste paper affected the formation and property of nanocellulose membranes deeply compared with the pretreatment process. Nanocellulose membrane prepared from office waste paper had a high transmittance (50.8 %) and low oxygen transmission rate (1.548·10−3/cm3mm/(m2·d·KPa)) while that prepared from waste corrugated paper had a high yield (50.63 %), high folding number (81 times), and low water vapor transmission rate (1550.24 g·m−2·day−1). Meanwhile, nanocellulose membrane prepared without any deinking treatment had a significant performance advantage in terms of water vapor barrier and folding resistance. Therefore, in actual application, deinking treatment can be selectivity omitted, which will simplify the preparation process flow and reduce the production cost of nanocellulose membrane. Furthermore, in order to satisfy different application requirements, the appropriate raw materials and treatment processes can be chosen to prepare nanocellulose membranes with different properties. This study provides a simple and low-cost way to prepare high-performance environment-friendly self-assembled nano membrane material, and also achieves the high value utilization of waste paper, which has a certain ecological, economic, and social benefits.

Janus nanocellulose membrane by nitrogen plasma: Hydrophilicity to hydrophobicity selective switch

Cellulose nanofibrils are one of the keystone materials for sustainable future, yet their poor water repellency hinders their push into industrial applications. Due to complexity and poor economical outcome and/or processing toxicity of the existing hydrophobization methods, nanocellulose loses against its antagonist plastic in medical and food industries. Herein, we demonstrate for the first time the “one-side selective water-repellency activation” in nanocellulose membranes by the means of mild N2-plasma treatment, exhibiting lowest wettability after 20 s of treatment. Hydrophobicity and accompanying Janus character were justified by the topological, chemical and structural reorganizations in cellulose nanofibrils. The findings suggest that the mechanism behind the hydrophilic/hydrophobic change primarily relies on the interplay between OH removal and appearance of SiCH3, originating from the polysiloxanes-based substrate, as well as complementary CNH2 groups formation. First-principles calculations show that NH2 groups moderately increase hydrophobicity, while various SiCH3 substitutions wholly change the character of the surface to repel water. Using nitrogen is shown to be crucial, as N(H)Si(CH3)3 groups induce greater hydrophobicity than simple OSi(CH3)3. Finally, the obtained materials absorb water on the hydrophilic side, while remaining hydrophobic on the other, exhibit high tensile strength, and protection against UV light, demonstrating applicability over wide range of applications.

PH-triggered polydopamine-decorated nanocellulose membranes for continuously selective separation of organic dyes

Membrane separation technology has emerged as a powerful tool to separate organic dyes from industrial wastewater. However, continuously selective separation of organic dyes with similar molecular weight remains challenging. Herein, we presented a pH-triggered membrane composed of polydopamine-decorated tunicate-derived cellulose nanofibers (PDA@TCNFs) for selective separation of organic dyes. Such self-supporting membranes with nanoporous structure were fabricated by facile vacuum-assisted filtration of PDA@TCNF suspension. The incorporation of polydopamine not only enhanced the stability of the membranes, but also endowed membranes with excellent pH sensitivity, facilitating the continuously selective separation of organic dyes. These pH-triggered PDA@TCNF membranes could selectively separate Methyl Orange (MO) and Rhodamine B (RB) from the MO/RB mixed solution by switching the pH values. The continuously selective separation of the MO/RB mixed solution was demonstrated, where both MO and RB recovery ratios maintained at ∼99 % during 50 repeated cycles. This work provides a new strategy to develop a pH-triggered sustainable nanocellulose-based membrane for continuously selective separation of mixed dyes.

Alternative proton exchange membrane based on a bicomponent anionic nanocellulose system

As integral parts of fuel cells, polymer electrolyte membranes (PEM) facilitate the conversion of hydrogen's chemical energy into electricity and water. Unfortunately, commercial PEMs are associated with high costs, limited durability, variable electrochemical performance and are based on perfluorinated polymers that persist in the environment. Nanocellulose-based PEMs have emerged as alternative options given their renewability, thermal and mechanical stability, low-cost, and hydrophilicity. These PEMs take advantage of the anionic nature of most nanocelluloses, as well as their facile modification with conductive functional groups, for instance, to endow ionic and electron conductivity. Herein, we incorporated for the first time two nanocellulose types, TEMPO-oxidized and sulfonated, to produce a fully bio-based PEM and studied their contribution separately and when mixed in a PEM matrix. Sulfonated nanocellulose-based PEMs are shown to perform similarly to commercial and bio-based membranes, demonstrating good thermal-oxidative stability (up to 190 °C), mechanical robustness (Young's modulus as high as 1.15 GPa and storage moduli >13 GPa), and high moisture-uptake capacity (ca. 6330 % after 48 h). The introduced nanocellulose membranes are shown as promising materials for proton-exchange material applications, as required in fuel cells.

Nanocellulose membrane with double-salt deep eutectic solvent for efficient carbon capture

Membrane-based gas separation technology is becoming increasingly attractive as a feasible alternative for carbon capture to alleviate global warming. Here, a double-salt deep eutectic solvent (DES) composed of organic salt (choline chloride) and inorganic salt (ZnCl2) is designed. The as-prepared DES exhibits a superb affinity and compatibility with nanocellulose because of the interactions between salt ions and cellulose carboxyl/hydroxyl groups. Through a solvent impregnation process, the DES was integrated into the nanocellulose gel precursor and used as a facilitated transport agent to form the functionalized nanocellulose membrane. The DES is tightly attached to the cellulose fibers with a high uniformity in the membrane matrix. Gas separation tests demonstrated that the DES@nanocellulose membranes presented a maximum CO2 permeability of 155.8 Barrer, with CO2/N2 and CO2/CH4 ideal selectivities of 43.6 and 48.4, respectively. Mixed gas separation tests were performed and the optimal membrane exhibited separation factors of 48.1 and 52.3 for CO2/N2 and CO2/CH4, respectively. The membranes provide a high solubility for CO2 due to the presence of abundant zinc ions, choline cations and carboxyl groups in the network, which can establish reversible coordination with CO2 and promote CO2 transport.

Bacterial nanocellulose loaded with bromelain and nisin as a promising bioactive material for wound debridement

The bacterial nanocellulose (BnC) membranes were produced extracellularly by a novel aerobic acetic acid bacterium Komagataeibacter melomenusus. The BnC was modified in situ by adding carboxymethyl cellulose (CMC) into the culture media, obtaining a BnC-CMC product with denser fibril arrangement, improved rehydration ratio and elasticity in comparison to BnC. The proteolytic enzyme bromelain (Br) and antimicrobial peptide nisin (N) were immobilized to BnC matrix by ex situ covalent binding and/or adsorption. The optimal Br immobilization conditions towards the maximized specific proteolytic activity were investigated by response surface methodology as factor variables. At optimal conditions, i.e., 8.8 mg/mL CMC and 10 mg/mL Br, hyperactivation of the enzyme was achieved, leading to the specific proteolytic activity of 2.3 U/mg and immobilization efficiency of 39.1 %. The antimicrobial activity was observed against Gram-positive bacteria (S. epidermidis, S. aureus and E. faecalis) for membranes with immobilized N and was superior when in situ modified BnC membranes were used. N immobilized on the BnC or BnC-CMC membranes was cytocompatible and did not cause changes in normal human dermal fibroblast cell morphology. BnC membranes perform as an efficient carrier for Br or N immobilization, holding promise in wound debridement and providing antimicrobial action against Gram-positive bacteria, respectively.

Antibacterial Komagataeibacter hansenii nanocellulose membranes with avocado seed bioactive compounds

AbstractBiocompatible, mechanically stable, highly hydrophilic/swellable and safe antibacterial biomaterials are crucial for wound dressing and other applications in the health sector. Therefore, this study was conducted for the development of bacterial nanocellulose membranes, which were, for the first time, enriched with bacteriostatic and bactericidal effective avocado seed extracts prepared by different extraction techniques (ultrasonic, Soxhlet, high pressure with supercritical carbon dioxide). First, the production process of bacterial nanocellulose membranes from Komagataeibacter hansenii bacteria was optimized related to the fermentation media composition and culture conditions, resulting in bacterial nanocellulose membranes with up to 83% crystallinity and 54.5 g/L yield. The morphological structure of the membranes was varied further by using air- and freeze-drying processes. The Soxhlet and high pressure with supercritical carbon dioxide avocado seed extracts with the most charge negative surface (-33 mV) and smallest hydrodynamic size (0.1 µm) thus resulted in 100% reduction of both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus with up to log reduction of 2.56 and up to 100% bactericidal efficacy after 24 h of exposure, and at 14 mg/g of avocado seed extracts integrated in the bacterial nanocellulose membranes homogeneously. The high swelling (up to 600%) and water retention ability of avocado seed extracts enriched bacterial nanocellulose membranes, with a biocidal release up to 2.71 mg/mL, shows potential for antibacterial applications in the biomedicine, cosmetics, and pharmaceutical industries.

Fabrication of Nanocellulose Membranes from Freshwater Green Algae (Chara corallina) and their Application in Removing Bacteria from Water

Fabrication of Nanocellulose Membranes from Freshwater Green Algae (Chara corallina) and their Application in Removing Bacteria from Water

Study of the structure and characterization of membranes reinforced with CuO-NPs/Graphene Oxide using bacterial cellulose extracted from Sargassum sp. for water nanofiltration system

Bacterial cellulose membranes find extensive applications in industries involving water purification, wastewater treatment, and biomedical uses. Nevertheless, prevailing membranes suffer from drawbacks like water flow hindrances and fouling susceptibility. Hence, the pressing need for more efficient and robust BC membranes. This study aims to assess the impact of a hybrid treatment involving Copper Oxide nanoparticles (CuO-NPs) and Graphene Oxide (GO) on bacterial nanocellulose membranes. The research employed two treatments: (1) control (BNCA), and (2) Bacterial cellulose infused with 0.5 wt% CuO-NPs/GO. The nanocellulose production involved a high-pressure homogenizer, followed by acetate nanocellulose synthesis and nanocomposite membrane functionalization with CuO nanoparticles. SEM, FTIR, and XRD analyses characterized the membranes. Successfully formed seaweed-derived bacterial cellulose had a thickness of 1-3 cm. Characterization showed it belonged to Cellulose type I with a crystalline degree ranging from 82.3% to 83.1%. FTIR analysis of dry BNCA membranes indicated changes in transmittance at 1738, 1554, and 764 cm-1 due to CuO-NPs/GO addition, altering the O-H bond in bacterial cellulose. Based on the results of the above research, it is evident that the Membrane Reinforced with CuO-NPs/Graphene Oxide has been successfully developed and holds potential as a water nanofiltration system.

Chitosan particles embedded bacterial nanocellulose flat membrane for hemodialysis

The development of bio-based hemodialysis membranes continues to be a challenge. Bacterial nanocellulose (BNC) membranes show potential in hemodialysis but can hardly retain beneficial proteins. Here, chitosan particles/bacterial nanocellulose (CSP/BNC) membranes were designed to efficiently remove uremic toxins and retain beneficial proteins. First, CSPs were synthesized in situ within a BNC membrane by ionic gelation following negative pressure impregnation. Subsequently, these membranes were thoroughly characterized. Compared with the BNC membrane, the pore volume and pore size of the 3 % CSP/BNC membrane decreased by 42.2 % and 32.1 %, respectively. The increased 22.2 times of Young's modulus and 88.9 % of tensile strength in the 3 % CSP/BNC membrane confirmed enhanced mechanical property. The sieving coefficient of bovine serum albumin decreased to 0.05 ± 0.03 in the 3 % CSP/BNC membrane. Moreover, the CSP/BNC membrane exhibited good hemocompatibility and cytocompatibility. The simulated dialysis results showed that the 3 % CSP/BNC membrane exhibited high clearance of urea (16.37 %/cm2) and lysozyme (3.54 %/cm2), while efficiently retaining bovine serum albumin (98.04 %/cm2). This is the first demonstration of the construction of a BNC-based hemodialysis membrane with in situ CSP formation to effectively regulate the pore properties of the membrane, making the CSP/BNC membrane a promising candidate for hemodialysis applications.

Nanocellulose as a Sustainable Polymer Electrolyte

Polymer electrolyte membranes in fuel cells and electrolyzers will play a key role in the hydrogen economy. These membranes are generally made of sulfonated fluoropolymers, which have excellent proton conductivity, impressive redox stability, and good gas barrier properties. However, the complex synthetic processes mean that they remain expensive. Their synthesis also involves ecologically damaging perfluorosulfonic acids (PFSAs), otherwise known as “forever chemicals” due to their persistence in the environment. More sustainable and lower cost hydrocarbon electrolytes should therefore be investigated.Cellulose is the most abundant biopolymer in nature, and is derived from plant matter. It is used at vast scale and low cost to make paper and cardboard. Cellulose can be chemically or mechanically treated to break up the fibers to form “nanocellulose”. Nanocellulose is a low-cost nanomaterial which can be formed into thin membranes which are much stronger than conventional cellulosic paper.We propose nanocellulose as an alternative electrolyte to replace sulfonated fluoropolymers in fuel cells. We confirmed that unmodified nanocellulose can conduct protons due to acidic hydroxyl groups. We also showed that nanocellulose membranes present a much better barrier to hydrogen compared to Nafion, and can successfully be used as an electrolyte in fuel cells. However, the current-voltage performance of unmodified nanocellulose was insufficient due to a high membrane resistance.We went on to improve the proton conductivity by introducing sulfonic acid groups and reduced the membrane resistance by using spray deposition to create thinner membranes, resulting in significantly improved fuel cell power density of 160 mW/cm2. We also implemented crosslinking with sulfosuccinic acid to simultaneously improve the ionic conductivity, increase strength, and reduce swelling in water. This work shows that nanocellulose is a promising new class of polymer electrolyte which could significantly reduce the cost and improve sustainability of fuel cell and electrolyser systems.1. Cellulose Nanocrystals Crosslinked with Sulfonic Acid as Sustainable Proton Exchange Membranes for Electrochemical Energy Applications, O. Selyanchyn, T. Bayer, D. Klotz, R. Selyanchyn, K. Sasaki, S. M. Lyth, Membranes 12 (7), 658 (2022)2. Spray Deposition of Sulfonated Cellulose Nanofibers as Proton Conducting Membranes for Fuel Cells, T. Bayer, B. Cunning, R. Selyanchyn, B. Smid, S. Fujikawa, K. Sasaki, S. M. Lyth, Cellulose, 28, 1355–1367 (2021)3. Proton Conductivity in Cellulosic Materials: A Review, O. Selyanchyn, R. Selyanchyn, S. M. Lyth, Frontiers in Energy Research: Fuel Cells, 8, 596164 (2020)4. High Temperature Proton Conductivity in Nanocellulose: Paper Fuel Cells, T. Bayer, R. Selyanchyn, S. Fujikawa, K. Sasaki, and S. M. Lyth, Chemistry of Materials, 28 (13), 4805–4814 (2016)

Development of polyethersulfone/polylactic acid‐blended nanocellulose membranes for enhanced removal of methylene blue dye

AbstractHerein, adsorptive polyethersulfone/polylactic acid (PES/PLA) blends membranes with systematic concentrations of cellulose nanofibers (CNFs) (0.5–2.5 wt%) were developed via a modified phase inversion process for the enhanced removal of cationic methylene blue (MB) dye. To the best of our knowledge, this is the first time that such adsorptive membranes have been produced for potential use in wastewater treatment. The fabricated membranes were characterized for surface and cross‐sectional morphology (scanning electron microscope), surface roughness (atomic force microscope), functionality (Fourier‐transform infrared spectroscopy), thermal stability (thermal gravimetric analysis), wettability (contact angle measurements), antifouling behavior (flux recovery studies), and dye adsorption and reusability (adsorption and desorption tests). CNF incorporated membranes showed improved wetting properties, with contact angle decreasing from 76° in the pristine membranes to 48° in 2.5 wt% PES/PLA membranes. The membrane bulk porosity increased from 60.3% to 79.23%, while the pure water flux increased from 210.8 to 399.12 Lm−2 h−1. At optimal conditions, CNF‐modified membranes removed >98% of MB compared with 8% removal by the pristine membranes. After five cycles of adsorption and desorption, the membrane with 2 wt% CNFs achieved over 70% dye removal showing excellent reusability properties. Adsorption followed pseudo‐second‐order and Freundlich models. The adsorption was attributed to electrostatic interactions between the negatively charged membrane surfaces and the positively charged dye molecules as well as through hydrogen bonding. Therefore, this work revealed that CNF‐modified PES/PLA membranes can be used as adsorbents for the enhanced removal of organic pollutants in water treatment applications.

A review on recent technological breakthroughs in anaerobic digestion of organic biowaste for biogas generation: Challenges towards sustainable development goals

Biogas production by anaerobic digestion is a potential technique for waste management and reduce carbon footprint. Heat capacity and fuel efficiency of biogas make it as an interesting alternative to the depleting nonrenewable fuels. The full potential of anaerobic digestion is not realized yet due to operational difficulties, government policies and people acceptance. This review focuses on the bottle necks in the biogas production technology and highlights some of the recent technology that can be adopted to achieve circular economy in biogas sector. In a waste to energy perspective, the presence of recalcitrant lignocelluloses in the available biowaste is discussed. Various pretreatment techniques used to convert these recalcitrant materials to suit anaerobic digestion are compared. Microalgal culture techniques for waste treatment and biogas upgradation are seen as a promising strategy towards clean energy. In many cases the impurities present in the biogas limit its usage. Hence, more emphasis for biogas upgradation by adopting advanced methods like facilitated transport in a nanocellulose membrane is needed. Implementation of biogas as an alternative to fossil fuels has both technological and policy related barriers. Biogas helps to attain sustainability development goals proposed by the United Nations. This review discusses the technological aspects of biogas production alongside the application of biogas to attain sustainability in the fuel sector. In various sections, we highlight the technical difficulties in biogas production, solutions for those problems, and potential of biogas technology in achieving sustainable goals.

Performance study of a superhydrophobic nanocellulose membrane on the surface of a wood-based panel prepared via the sol-gel method

The scarcity of wood resources in China has led to the development of wood-based panels. However, wood-based panels often exhibit hydrophilicity and require veneering. This paper presents a solution to this problem in which a composite membrane is prepared using nanocellulose (CNF) and polyvinyl alcohol (PVA) through the hot pressing method. The surface of the composite membrane is then coated with silica nanoparticles using the sol-gel method to achieve a superhydrophobic effect. The coating has a surface hardness of 5H, adhesion of 0, gloss of 20% Gu, colour difference of 3.11, and impact resistance of 19 kg.cm. The resulting modified wood-based panel has a contact angle of 166.8° and a sliding angle of 5.3°, indicating excellent self-cleaning properties and chemical stability. This innovation promotes the use of wood-based panels in high-humidity environments and offers new research avenues for the high-value utilization of nanocellulose.

A novel salt-barrier method of preparation flexible temperature resistant full-component nanocellulose membranes

With the simplification and diversification of separation technologies, nanocellulose membranes have become widely used as insulating materials. Recently, study of nanocellulose membrane modification has become a hot topic. However, the application of nanocellulose membrane has been limited due to their inadequate heat resistance and flexibility. Herein, based on the pyrolytic and thermoplastic properties of cellulose, we innovatively introduced a salt barrier scheme to regulate the degree of hydrogen bonding and thermoplastic bonding between fibers. This was achieved by adding a salt barrier agent, NaCl, in the middle of the nanocellulose to prepare and obtain flexible, high-temperature-resistant nanocellulose film materials. The full-component cellulose films thus prepared exhibited high tensile strength (8 MPa), excellent flexibility (105 mN), high electrical breakdown strength (67 KV/mm), and volume resistivity meeting the standard of insulation materials (3.23 × 1013 Ω·m). This scheme adheres to the principles of low cost, green, non-toxic and non-hazardous, providing a brand new approach for the research and development of high temperature resistant cellulose membrane materials, which is of significant commercial value and industrialization prospect.

Green in situ immobilisation of gold nanoparticles on bacterial nanocellulose membranes using Tannic acid and its detection of Fe3.

Oxidative stress is one of the factors that promote melanogenesis. Trivalent iron ions play a key role in regulating the iron-catalysed oxidative stress response. A novel SERS flexible membrane sensor based on tannic acid with good sensitivity and uniformity was prepared by green in situ reduction of gold nanoparticles on bacterial cellulose membrane（BCM）with a simple and highly selective method to detect Fe3+. Under alkaline conditions, Fe3+ is adsorbed on the BCM-TA@Au NPs flexible membrane by tannic acid (TA) through chelation, thus enabling the detection of Fe3+. Furthermore, this simple detection system has a wide linear detection range and high sensitivity to effortlessly evaluate Fe3+ at concentrations up to 10-7 M. More importantly, the proposed SERS flexible substrate performed well in determining Fe3+ concentrations in B16 melanocytes, providing new insights into the factors affecting the melanin synthesis pathway and providing a potential biomarker for melanoma treatment.

A nanocellulose molecularly imprinted membrane: Preparation, characterization and application in targeted separation of taxane 10-deacetylbaccatin III

Targeted separation of active phytochemicals is urgently needed in the natural medicine field. In this paper, due to the natural porosity and high biocompatibility of cellulose, a nanocellulose membrane combined with surface molecular imprinting was successfully prepared; the efficient nanocellulose-based molecular imprinted membrane (NC-MIM) provided good adsorption for the targeted separation of phytochemicals such as 10-deacetylbaccatin III (10-DAB), an essential intermediate in the synthesis of the anticancer drug paclitaxel. Through a series of characterization and adsorption experiments, the adsorption mechanism of NC-MIM was determined. At pH 8.0 and temperatures of 20 °C–40 °C, the maximum capacity of NC-MIM for adsorption of 10-DAB reached 66.90 mg g − 1, and the content of 10-DAB was dramatically increased 17.5-fold after adsorption. The specific adsorption results showed that NC-MIM had excellent capacity for targeted separation of 10-DAB from among taxane structural analogues. Even after ten cycles, NC-MIM demonstrated a remarkable adsorption capacity of 86.43%, thereby indicating exceptional selectivity and stability. The successful implementation of NC-MIM for green, safe, and efficient enrichment of phytochemicals from plants provides a promising new approach and valuable insights into its practical application.

Durable Co(OH)2/stearic acid-based superhydrophobic/superoleophilic nanocellulose membrane for highly efficient oil/water separation and simultaneous removal of soluble dye

The discharge of industrial oily wastewater is threats to the environment. A long-lasting Co(OH)2/stearic acid (STA)-based superhydrophobic/superoleophilic nanocellulose-based membrane (SSNM) for extremely effective oil/water and simultaneous removal of soluble dye was created to offer solutions to this problem. The mechanical durability of the prepared Co(OH)2/STA-based SSNMs was reinforced by depositing Co(OH)2 and STA on the cellulose fibers. The Co(OH)2/STA-based SSNM shows a high water contact angle of 164 ± 2° and an oil contact angle of ∼0°, exhibiting excellent superhydrophobicity and superoleophilicity. With good usage stability, high separation efficiencies (>94.0%) and high separation fluxes (>130 L·m−2·h−1) were achieved for four oils. The separation flux and efficiency of N-hexane did not change obviously after repeated separation. Furthermore, it exhibited reliable photocatalytic ability, which contributed to the reduction of organic contamination. As a result, Co(OH)2/STA-based SSNM shows strong potential for practical applications such as oil/water separation and photocatalytic degradation of organic pollutants.

A smart gating nanocellulose membrane showing selective separation and self-cleaning performance

A smart gating membrane based on thermal-sensitive poly (N-isopropyl acrylamide) (PNIPAM)-grafted nanocellulose and carbon nanotube (CNT) was prepared. The presence of PNIPAM shell on cellulose nanofibrils (CNFs) endow the composite membrane with thermal responsiveness. By external stimulation, an increase temperature from 10 °C to 70 °C allows the average pore size of the membrane to be controlled from 28 nm to 110 nm, as well as the water permeance from 440 L·m−2·h−1·bar−1 to 1088 L·m−2·h−1·bar−1. The gating ratio of the membrane can reach 2.47. The photothermal effect of CNT rapidly warms up the membrane to the lowest critical solution temperature in the water, avoiding the constraint that the whole water phase cannot be heated throughout the practical use process. The membrane can precisely control the nanoparticles to concentrate at 25.3 nm, 47.7 nm or 102 nm by adjust the temperature. In addition, the water permeance can be restored to 370 L·m−2·h−1·bar−1 by washing the membrane under light. The smart gating membrane has a wide application in substance multi-stage separation and selective separation, and it can realize self-cleaning.