Nanocellulose as a Sustainable Polymer Electrolyte

Abstract

Polymer electrolyte membranes in fuel cells and electrolyzers will play a key role in the hydrogen economy. These membranes are generally made of sulfonated fluoropolymers, which have excellent proton conductivity, impressive redox stability, and good gas barrier properties. However, the complex synthetic processes mean that they remain expensive. Their synthesis also involves ecologically damaging perfluorosulfonic acids (PFSAs), otherwise known as “forever chemicals” due to their persistence in the environment. More sustainable and lower cost hydrocarbon electrolytes should therefore be investigated.Cellulose is the most abundant biopolymer in nature, and is derived from plant matter. It is used at vast scale and low cost to make paper and cardboard. Cellulose can be chemically or mechanically treated to break up the fibers to form “nanocellulose”. Nanocellulose is a low-cost nanomaterial which can be formed into thin membranes which are much stronger than conventional cellulosic paper.We propose nanocellulose as an alternative electrolyte to replace sulfonated fluoropolymers in fuel cells. We confirmed that unmodified nanocellulose can conduct protons due to acidic hydroxyl groups. We also showed that nanocellulose membranes present a much better barrier to hydrogen compared to Nafion, and can successfully be used as an electrolyte in fuel cells. However, the current-voltage performance of unmodified nanocellulose was insufficient due to a high membrane resistance.We went on to improve the proton conductivity by introducing sulfonic acid groups and reduced the membrane resistance by using spray deposition to create thinner membranes, resulting in significantly improved fuel cell power density of 160 mW/cm2. We also implemented crosslinking with sulfosuccinic acid to simultaneously improve the ionic conductivity, increase strength, and reduce swelling in water. This work shows that nanocellulose is a promising new class of polymer electrolyte which could significantly reduce the cost and improve sustainability of fuel cell and electrolyser systems.1. Cellulose Nanocrystals Crosslinked with Sulfonic Acid as Sustainable Proton Exchange Membranes for Electrochemical Energy Applications, O. Selyanchyn, T. Bayer, D. Klotz, R. Selyanchyn, K. Sasaki, S. M. Lyth, Membranes 12 (7), 658 (2022)2. Spray Deposition of Sulfonated Cellulose Nanofibers as Proton Conducting Membranes for Fuel Cells, T. Bayer, B. Cunning, R. Selyanchyn, B. Smid, S. Fujikawa, K. Sasaki, S. M. Lyth, Cellulose, 28, 1355–1367 (2021)3. Proton Conductivity in Cellulosic Materials: A Review, O. Selyanchyn, R. Selyanchyn, S. M. Lyth, Frontiers in Energy Research: Fuel Cells, 8, 596164 (2020)4. High Temperature Proton Conductivity in Nanocellulose: Paper Fuel Cells, T. Bayer, R. Selyanchyn, S. Fujikawa, K. Sasaki, and S. M. Lyth, Chemistry of Materials, 28 (13), 4805–4814 (2016)