NaCl Research Articles

Compatibility and stability of ademetionine 1,4-butanedisulfonate injection mixed with fructose and glucose diluents and pilot study of long-term storage impurities by LC-MS/MS

Fructose injection is occasionally used to dilute ademetionine 1,4-butanedisulfonate injection for patients who cannot receive glucose or sodium chloride injections in clinical settings. Since our PIVAS staff reported that discoloration occurred after ademetionine 1,4-butanedisulfonate dissolved with fructose injection, this study aims to investigate the stability of ademetionine 1,4-butanedisulfonate in fructose and glucose solutions. Ademetionine 1,4-butanedisulfonate was purchased and diluted with fructose or glucose injection for compatibility testing. The solutions were maintained under various conditions for different periods of time, after which the concentration of ademetionine 1,4-butanedisulfonate and other impurities was analyzed. The chemical structures of unknown impurities were further investigated by liquid chromatography-tandem mass spectrometry. The analytical method was validated and was deemed to be suitable for the analyses in this study. Compatibility tests indicated that ademetionine 1,4-butanedisulfonate is sensitive to temperature, illumination, and pH. When diluted with fructose or glucose, the concentration of ademetionine 1,4-butanedisulfonate decreased over time. The contents of impurities increased accordingly. Additionally, an unknown impurity was identified, speculated to be a hydroxyl oxidation product of ademetionine based on the LC-MS/MS results. Both fructose and glucose injections can be used as diluents for ademetionine 1,4-butanedisulfonate, and the resulting mixture remains stable for up to 8 h after preparation.

Ultrasound Activated Clay: Preliminary Study of PB And as Removal in Aqueous Media

Objective: The objective of this study was to evaluate the removal of Pb and As in aqueous media by activated clay (AC). Theoretical Framework: Heavy metals in water represent a risk to health and ecosystems, their removal through new materials is a challenge for the industry. Method: The methodology adopted for this research comprises in that natural clay (NC) was activated with sodium chloride and phosphoric acid followed by sonication. A synthetic solution of Pb and As was prepared at different pH. Results and Discussion: The zero charge point was found to be 7.10 for AC and 8.02 for NC, the ζ potential was found to be between - 41.15 and - 45.43 mV in the pH range of 4 to 12, with degree of crystallinity of 97.24% and crystal size of 2.85 nm determined by XRD. FTIR analysis allowed the identification of functional groups with chelating capacity. Was observed As removal of 75.51% (110.40 mg/g) and 23.23% (58.13 mg/g) and 97.75% (106.41 mg/g) and 100.0% (206.53 mg/g) for Pb with AC and NC respectively at pH 6 and 8. Research Implications: Los reaultadoe encontrados sugieren que la arcilla activada se convierte en un material alta capacidad de adsorción de metales pesados en sistemas multimetal. Esta cualidad se debe al incremtno de grupos funionales en su superficie y al tamaño nanométrico que incrementa el área de contacto. Originality/Value: Activation of the clay with sodium chloride and weak acid followed by sonication is an environmentally friendly process that produces a material with high heavy metal removal capacity in aqueous media.

Landfill-gas-to-biomethane via a new carbon capture and utilization technology: One-pot sodium chloride batch mineralization

A new landfill-gas-to-biomethane route adopts a new carbon capture and utilization process via sodium chloride (NaCl) mineralization. The new process exports chlorine (Cl2), dense carbon dioxide (CO2), hydrogen (H2) and sodium carbonate (Na2CO3). Process absorbs CO2 from landfill-gas with aqueous NaOH/Na2CO3 in batch multi-purpose columns that execute several processing steps in one-pot; namely: CO2 absorption; sodium bicarbonate (NaHCO3) precipitation; NaHCO3 filtration driven by pressurized CO2; NaHCO3 breakage to Na2CO3 via hot CO2 injection; Na2CO3 cooling via cold CO2 injection; and solid Na2CO3 disposal through column lateral doors. The one-pot columns avoid investment with several steady-state complex equipment like bubble-columns, centrifuges, filters, solid dryers, heaters, mud pumps and solid transporters. The depleted solvent from the one-pot columns is regenerated via steady-state, high current-density, brine electrolysis wherein solvent continually feeds cathodes, while brine continually feeds anodes as sodium source. Sodium reaches the cathode through selective Flemion F9010 ion-exchange membrane. CO2 is partially mineralized to Na2CO3 and partially exported as supercritical CO2. Process output-ratios per captured CO2 are: 1.159kgNa2CO3/kg, 0.7754kgCl2/kg, 0.4299kgCH4/kg, 0.0219kgGREEN−H2/kg and 0.51875kgCO2/kg, while the input-ratios are 1.2782kgNaCl/kg, 0.197kgH2O/kg and 1.7495kWh/kg. The new landfill-gas-to-biomethane (480,000Nm3/d landfill-gas) was evaluated environmentally and techno-economically reaching 48.6MMUSD investment, 112MMUSD/y revenues and 418.34MMUSD net value (30 years).

Multimode Luminescence Tailoring in PMA4Na(In,Sb)Cl8 Organic–inorganic Hybrid Metal Halide via Rigid Benzene Ring Induced Local Lattice Distortion

AbstractLow dimensional organic‐inorganic hybrid metal halide materials have attracted extensive attention due to their superior optoelectronic properties. However, low photoluminescence quantum yields (PLQYs) caused by parity‐forbidden transition hinder their further application in optoelectronic devices. Herein, a novel yellow‐emitting PMA4Na(In,Sb)Cl8 (C7H10N+, PMA+) low‐dimensional OIMHs single crystal with a PLQY as high as 88 % was successfully designed and synthesized, originating from the fact that the doping of Sb3+ effectively relaxes the parity‐forbidden transition by strong spin‐orbit (SO) coupling and Jahn‐Teller (JT) interaction. The as‐prepared crystal shows an efficient dual emission peaking 495 and 560 nm at low temperature, which are ascribed to different levels of 3P1→1S0 transitions of Sb3+ in [SbCl6]3− octahedral caused by JT deformation. Moreover, wide‐range luminescence tailoring from cyan to orange can be achieved through adjusting excitation energy and temperature because of flexible [SbCl6]3− octahedral in the PNIC lattice. Based on a relative stiff lattice environment, the 560 nm yellow emission under 350 nm light excitation exhibits abnormal anti‐thermal quenching from 8 to 400 K owing to the suppression of non‐radiative transition. The multimode luminescence regulation enriches PMA4Na(In,Sb)Cl8 great potential in the field of optoelectronics such as temperature sensing, low temperature anti‐counterfeiting and WLED applications.

Rapid Single-Step Detection of Polyfluoroalkyl Substances (PFAS) Using Electropolymerized Phenoxazine Dyes.

Per- and polyfluoroalkyl substances (PFAS) are highly stable ubiquitous contaminants that have been recently added to the list of regulated chemicals. While methods for PFAS detection exist, analysis is difficult, involving a tedious protocol and expensive instrumentation. Here, we demonstrate the first implementation of a phenoxazine dye as a sensing probe that facilitates rapid and inexpensive detection of representative PFAS, e.g., perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA), at sensitivity levels covering the recently established Environmental Protection Agency (EPA) limits. The method comprises an electrode modified with a stable redox film of Meldola blue (MB) in its electropolymerized form (epMB), which provides amino sites for electrostatic interactions with PFAS. Long-chain PFAS bind specifically to the epMB, inducing a hydrophobic-type cluster formation through ion-pair and F-F interactions. This binding generates concentration-dependent changes in the epMB/epMB+ oxidation, enabling rapid and sensitive quantification in a single step with high sensitivity, reaching a limit of detection of 0.4 ppt for PFOS and 1.65 ppt for PFOA. The sensor demonstrates good selectivity toward common interfering compounds like humic acid, sodium chloride and fluoride, metallic ions (Cu, Hg, As), as well as pesticides. In addition to PFOS and PFOA, the sensors can measure other perfluoroalkyl compounds, demonstrating potential as a tool for rapid quantification of a total PFAS index, with affinity for long-chain PFAS. This work highlights the integration of redox receptors into an electrochemical sensor to solve the grand challenge of PFAS analysis using a rapid and inexpensive procedure, with potential for field deployment.

Ultra-Stretchable, Adhesive, Conductive, and Antifreezing Multinetwork Borate Ester-Based Hydrogel for Wearable Strain Sensor and VOC Absorption.

Hydrogels based on borate ester bonds exhibit remarkable tensile strength and self-healing ability, which make them a promising material for various biological research and strain sensor applications. However, in order to meet the practical application of hydrogel strain sensors, they must also show high conductivity, frost resistance, and proper adhesion, which is still a continuous challenge. Herein, a triple network hydrogel was prepared using poly(vinyl alcohol) (PVA) as the first network, ethylene imine polymer (PEI) as the second network, and poly(acrylamide-co-acrylic acid) copolymer (denoted as P(AM-Co-AA)) as the third network. 3-Carboxy-4-fluorophenylboronic acid (CFBS) was used as the cross-linking agent, glycerol (GL) was added to improve low-temperature resistance, and sodium chloride (NaCl) was incorporated to enhance electrical conductivity. The resulting PVA-CFBS@PEI@P(AM-Co-AA) triple network hydrogel exhibited impressive mechanical properties, including ultra tensile strength (4100%, 266.8 kPa), high toughness (6.5 MJ/m3), and low-temperature resistance (-60 °C). Additionally, it demonstrated high conductivity (σ = 1.83 mS/cm). The incorporation of CFBS endowed the hydrogel with excellent self-healing ability, while GL improved low-temperature resistance and strain sensing sensitivity (gauge factor (GF) = 2.8 (0-300%), GF = 5.6 (300-600%), GF = 8.7 (600-1000%)). The prepared hydrogel sensor can repetitively detect and differentiate between a wide range of human activities such as joint movements, frowning, and smiling. Additionally, the hydrogel demonstrated favorable mechanical properties at -20 °C (good adhesion, tensile strength: 1169.8%, 1.2 MPa; conductivity: 0.71 mS/cm, and strain sensing coefficient: GF = 1.3), making it suitable for applications in low-temperature environments. Furthermore, it also functions as an exceptional adsorbent, capable of selectively absorbing volatile organic compounds at high capacity (e.g., methanol: 1.80 g/g; acetone: 1.50 g/g).

Gitelman Syndrome in a 37-Years Old Woman with Urinary Tract Syndrome and History of Caesarean Section: A Case Report

Gitelman Syndrome (GS) is a rare genetic disorder often underdiagnosed due to its non-specific symptoms that can appear from neonatal stages to adulthood. It is more frequently observed in Asians, with a prevalence of approximately 1 in 40,000 people. Accurate diagnosis requires a comprehensive clinical interview and laboratory examinations. This report presents the case of a 37-year-old woman with GS who also experienced a urinary tract infection and had a history of cesarean section. Upon admission, she reported feeling fatigued and weak in all extremities. She had undergone a cesarean section a month prior due to pre-eclampsia. Initial laboratory tests revealed hypokalaemia, hyponatremia, and hypochloraemia. Further evaluation during hospitalization detected a urinary tract infection, hypocalciuria, and hypomagnesemia. The patient also suffered from carpopedal spasms and muscle cramps. Treatment included magnesium sulfate, calcium gluconate, potassium chloride, and sodium chloride infusions to restore electrolyte balance. The patient was discharged after six days, with a diagnosis of Gitelman Syndrome, which was unusual given her late onset of symptoms, as most cases are identified in childhood. The clinical presentation was largely driven by the patient’s electrolyte imbalances, especially hypokalaemia and hypomagnesemia, with hypomagnesemia further contributing to hypocalcemia and vitamin D deficiency. The patient’s symptoms improved after appropriate electrolyte supplementation. This case emphasizes the importance of a detailed clinical history and laboratory assessments in diagnosing GS, along with timely correction of electrolyte disturbances to improve the patient’s condition and prevent complications.

Effects of foliar spraying with melatonin and chitosan Nano-encapsulated melatonin on tomato (Lycopersicon esculentum L. cv. Falcato) plants under salinity stress

Melatonin has been found to be crucial in the growth and development of plants under stress conditions. In this study, the effects of melatonin and nano melatonin regarding the growth and development of tomato plants, along with their photosynthetic pigment, phenol, and antioxidant activity, were investigated under saline conditions. The study was conducted using a completely randomized design with three replications, and the applied treatments were salt stress and foliar spraying of melatonin at a concentration of 0 (control), melatonin (Mel), and nano capsule-melatonin (Nano-Mel) at 500 µM. Salinity treatments included application of sodium chloride with two concentration of 0 mM NaCl (S1) and 50 mM NaCl (S2). Under saline conditions, Mel and Nano-Mel increased both shoot and root fresh and dry weights, improved relative water content (RWC), and enhanced antioxidant activity and phenolic content. Salinity elevated leaf ABA content, unaffected by Mel or Nano-Mel. Chlorophyll fluorescence and SPAD values demonstrated resilience to salinity with Mel and Nano-Mel applications. Nano-Mel notably mitigated Na + accumulation in leaves under salinity, helping maintain K + homeostasis. Proline levels rise due to salinity but decreased with Mel and Nano-Mel treatments. Electrolyte leakage (EL) increased under salinity but is significantly reduced by Mel, indicating enhanced membrane stability. The findings reveal that salinity stress significantly reduced plasma membrane intrinsic protein (PIP) expression in roots and leaves, whereas Mel and Nano-Mel treatments enhance PIP expression, particularly in roots. The study concludes that Mel and Nano-Mel effectively alleviate salinity-induced stress, promoting growth and maintaining physiological homeostasis in tomato plants.

Respiratory Delivery of Lacticaseibacillus rhamnosus GG by Vibrating-Mesh and Jet Nebulisation

Background: The use of probiotic bacteria to improve lung health has been gaining interest. Although the oral delivery of probiotics and their effects are well documented, there is currently limited knowledge on the respiratory delivery of probiotics. Objectives: This study aimed to investigate whether nebulisation is suitable for delivering Lacticaseibacillus rhamnosus GG (LGG) into the lungs for the potential treatment of bacterial pulmonary infections. Methods: It compared the dose output and aerosol performance of a vibrating-mesh nebuliser (VMN) and a jet nebuliser (JN) in nebulising LGG suspended in de Man Rogosa Sharpe (MRS) broth, phosphate-buffered saline (PBS), or normal saline (0.9% w/v sodium chloride in water). Results: The VMN consistently produced a higher output than the JN for all liquid media, indicating that VMN was more efficient. The fine-particle fractions of both nebulisers were comparable for a given medium. The highest fine-particle fraction was achieved with LGG suspended in MRS broth for both nebulisers (20.5 ± 2.8% for VMN; 18.7 ± 3.4% for JN). This suggests that the aerosol performance of nebulised probiotics may depend on the medium in which the probiotic bacteria were suspended. Conclusions: Therefore, this study demonstrated that the nebulisation efficiency of LGG depended on the nebuliser type and liquid medium of the probiotic suspension.

Perfluorodecanethiol-Functionalized Silver Nanoparticles on Polyester Films as High-Performance Surface-Enhanced Raman Spectroscopy Substrates.

The insufficient capabilities of current surface-enhanced Raman scattering (SERS) substrates in enriching dilute analytes from complex media severely restrict detection sensitivity, hampering practical applications. To meet this demand, in this study, a novel super hydrophobic membrane that can be directly prepared on a large scale based on the silver nanoparticles (AgNPs) functioning with perfluorodecanethiol (PFDT) is fabricated and evaluated as an SERS substrate. Firstly, polyester (PET) films modified with sodium chloride were proven to be capable of loading AgNPs, and the sizes of AgNPs were investigated. In addition, the PFDT concentration and reaction time for functionalizing the surface of AgNPs have been optimized. The relationship between the hydrophobic properties of the film and its SERS performance was then studied. The PET@Ag-PFDT film demonstrates two orders of magnitude superior SERS performance than the unmodified PET@Ag substrate, with a detection limit of folic acid approaching 5 × 10-10 M.

Cation-Dependent Mixed Ionic-Electronic Transport in a Perylenediimide Small-Molecule Semiconductor.

A rapidly growing interest in organic bioelectronic applications has spurred the development of a wide variety of organic mixed ionic-electronic conductors. While these new mixed conductors have enabled the community to interface organic electronics with biological systems and efficiently transduce biological signals (ions) into electronic signals, the current materials selection does not offer sufficient selectivity towards specific ions of biological relevance without the use of auxiliary components such as ion-selective membranes. Here, we present the molecular design of an n-type (electron-transporting) perylene diimide semiconductor material decorated with pendant oligoether groups to facilitate interactions with cations such as Na+ and K+. Using the cyclic 15-crown-5 oligoether motif, we find that the resulting mixed conductor PDI-crown displays a strong dependence on the size of the electrolyte cation when tested in an organic electrochemical transistor configuration. In stark contrast to the low current response on the order of 1 μA observed with aqueous sodium chloride, a nearly 200-fold increase in current is observed with aqueous potassium chloride. We ascribe the high selectivity to extended molecular aggregation and therefore efficient charge transport in the presence of K+ due to a favourable sandwich-like structure between two adjacent 15-crown-5 motifs and the potassium ion.

Plant-mediated synthesis of biocompatible ZnO NPs: comprehensive characterisation and investigation of their catalytic, corrosion inhibition, antibacterial, scavenging and anti-oncogenic activities

ABSTRACT In this study, we present a novel method for synthesising zinc oxide nanoparticles (ZnO NPs) from the dried Caesalpinia sappan seeds powder. Comprehensive characterisation using XRD, FTIR, SEM, and EDX techniques was employed to elucidate the surface and morphological properties of these ZnO NPs. We showcase the versatile application of ZnO NPs as heterogeneous catalyst in the synthesis of 5-arylmethylidene-pyrimidin-2,4,6-triones. Notably, this eco-friendly approach eliminates the need for organic solvents, offering a sustainable route to producing 5-arylmethylidene-pyrimidin-2,4,6-triones in high yields. Furthermore, we investigate the corrosion inhibition properties of ZnO NPs on mild steel in 5% sodium chloride solution. Our findings reveal the ZnO NPs’ significant inhibition efficiency against corrosion, promising potential for practical applications. In addition to their chemical applications, we delve into the biological activities of ZnO NPs, including their antibacterial effects against both Gram-positive and Gram-negative bacteria, anti-oncogenic activity against DU-145 cells, and scavenging activities against oxidative stress.

Experimental investigation on the moisture movement behavior of granites

This study comprehensively investigates the hygric performance of two commonly used types of granite in masonry, each characterized by distinct porosity levels. A series of experimental tests, including capillary absorption, one-dimensional drying, cup methods, vacuum saturation, sorption/desorption isotherms, mercury intrusion porosimetry, and ultrasonic pulse velocity, was conducted in different directions and by using both pure water and NaCl solutions. The results highlight pronounced anisotropy in the granite’s hygric response, with significant directional differences in liquid and vapor moisture movement, as well as ultrasonic wave propagation. Granite with lower porosity and a finer pore structure exhibited hysteresis effects and more pronounced hygroscopic behavior, while granite with higher porosity showed greater capillary activity. The presence of salt crystals within the pore network significantly influences vapor and liquid transport properties, porosity, and moisture storage capacity. The gradual formation of sodium chloride crystals on drying surfaces noticeably altered drying kinetics, influenced by salt concentration and pore characteristics. These findings provide valuable insights into the hygric properties of granite, essential for understanding its durability and informing moisture transfer numerical models.

Little-Cost Potentiometric and Spectrophotometric Procedures for Cephalothin Assessment in Pure and Biological Fluids.

Low-cost potentiometric and spectrophotometric procedures for cephalothin (CPI) determination in pure and biological fluids were investigated. The potentiometric technique is created through titration of CPI with an aqueous medium of 0.1 M NaOH at an ionic strength of μ = 0.3 M sodium chloride and room temperature by a combined glass pH electrode. Using the standard addition method, we found that the detection and quantitative limits were 0.042 mg/mL, with the standard deviation SD = 0.011, correlation coefficient R = 0.9880 (n = 5), and linear concentration ranges from 0.042 to 0.82 mg/mL. This technique was utilized to assess CPI in pure solutions, urine, and serum with suitable results. No interference was exposed in the presence of public components of the samples under study. Recovery of CPI for pure and biological fluids is in the range of 98.2-101%. Also, the spectrophotometric method has been performed through the formation of the Prussian Blue (PB) complex. The reaction between the acidic hydrolysis product of CPI (T = 60 °C) and the mixture of Fe3+ with hexacyanoferrate (III) ions (HCF(III)) was detected for the spectrophotometric determination of the drug. The maximum absorbance of the formed complex was measured at λ = 283 nm with 2.0 × 103 L mol-1 cm-1 molar absorptivity. Reaction states have been advanced to acquire the PB complex of great sensitivity and longer stability. In optimal states, the absorbent of the PB compound was attained to grow linearly with the increase in the concentration of CPI, which agrees with the correlation coefficient values. The detection and quantitative limits were 0.000036 and 0.0012 mg/mL, respectively, with the standard deviation, SD = 0.0005, correlation coefficient, R = 0.9955 (n = 5), and the linearity range of the calibration plot 0.0005-0.02 mg/mL CPI. The planned technique was positively utilized for the detection of CPI in both urine and serum models. The results fit well with the data found from the potentiometric method.

Solvent-depended magnetic-field-induced synthesis of iron nanochains

This work presents a synthesis of iron nanochains through magnetic-field-induced reduction reaction performed with sodium borohydride in water, ethanol and isopropanol. After their preparation, the nanomaterials obtained in three different processes are washed several times in ethanol and acetone to remove side-products. The performed cleaning step is very sufficient for water-based synthesis of iron nanochains. In contrary, the nanostructures obtained in ethanol and isopropanol contain a significant amount of sodium chlorides which is hard to dispose. Moreover, the use of ethanol and isopropanol solvents causes the reduction of nanochains’ diameters. Both the presence of sodium chlorides and the reduction of diameter size result in the decrease of saturation magnetization of iron nanochains and the increase of their coercivities.

Effects of electrode/electrolyte materials on heavy-metal removal in industrial wastewater with flow capacitive deionization method

The expansion of industrial facilities poses a significant environmental risk due to the generation of extensive wastewater containing complex components that effluent human health. Flow-electrode Capacitive Deionization (FCDI) technology has emerged as a promising solution for wastewater treatment due to its unlimited adsorption capacity and continuous long-term operations compared to conventional systems. This study investigates the efficiency of the FCDI system in purifying industrial wastewater by extracting complex heavy metal ions, intending to achieve complete recycling and zero discharge. Different electrolyte/electrode materials were investigated to achieve high removal efficiency, including electrolytes such as sodium chloride (NaCl) and sodium sulfate (Na2SO4), and electrodes such as active carbon (AC) and C65 carbon black (C65 CB) used in lithium-ion batteries. We found that the innovative combination of Na2SO4 electrolyte with 0.1 g of C65 CB exhibited an exceptional salt removal efficiency of 90 %, surpassing NaCl electrolyte which showed 68 % efficiency. Additionally, we observed higher adsorption with C65 CB slurry compared to AC when using Na2SO4 electrolyte. To deepen our insights, Molecular Dynamics (MD) simulations were conducted to explore heavy metal ions interactions with electrode/electrolyte and membrane materials under an electric field. The results indicated that Ni2+ ions had the highest passage rate of 80 % across the membrane, followed by Cr2+, Cu2+, and Zn2+. Furthermore, superior adsorption of Ni2+ ions onto the C65 CB electrode was noted, contributing to enhanced charge transfer and overall conductivity. Furthermore, we evaluated the economic and environmental implications associated with implementing the FCDI system in practical. This study presents a novel approach by using C65 carbon black (CB) with Na2SO4 as the electrolyte, indicating high adsorption efficiency at low carbon loading electrode. This combination offers a cost-effective and sustainable solution for improving complex heavy metal ion removal in FCDI systems. Overall, our study’s findings significantly contribute to offering crucial insights into optimizing FCDI technology for efficient heavy metal ions removal in industrial wastewater treatment using lithium-ion battery anode/cathode electrode material.

The impact of intravenous versus submucosal dexamethasone on short-term patient response: A randomized controlled trial.

The purpose of this randomized, cross-over trial was to determine if a preoperative dose of dexamethasone administered submucosally is as effective as intravenous (IV) dexamethasone in reducing pain, swelling, and analgesic consumption after periodontal flap surgery. Thirty-nine patients planned for two similar flap surgeries under IV sedation were included. Before the first surgery, patients were randomized to receive 8mg of IV or submucosal dexamethasone. Via the alternate route, 0.9% sodium chloride (placebo) was administered. Dexamethasone was administered via the opposite route during the second surgery. A standardized regimen of 600mg ibuprofen and 325mg acetaminophen was used to manage postoperative pain. Patients recorded pain and swelling levels on a 21-point numerical rating scale (NRS-21) and a four-point visual rating scale (VRS-4), as well as analgesic usage via a phone application at 12, 24, 48, 72, and 168h postoperatively. While NRS-21 and VRS-4 data suggest a trend toward decreased pain and swelling with IV administration, there were no significant differences in analgesic usage or pain at any time and a significant difference in swelling only at 72 h in favor of IV administration (p=0.047). There was no significant difference in pain or analgesic usage following periodontal flap surgery comparing IV and submucosal dexamethasone. A statistically significant difference in swelling between groups at 72 h is likely of limited clinical relevance. Submucosal dexamethasone is an effective way to mitigate pain following periodontal surgery, particularly when IV access for sedation is not required.

Volume therapy: which preparation for which situation?

The most commonly used fluids for volume therapy are crystalloids and colloids. Crystalloids comprise 0.9% sodium chloride and balanced crystalloids (BC). Colloids can be divided into artificial colloids and human albumin (anatural colloid). Large studies show advantages for BC over 0.9% NaCl with respect to renal endpoints, probably due to the unphysiologically high chloride content of 0.9% NaCl. However, other studies, such as the BaSICS and PLUS trials, showed no significant differences in mortality in aheterogeneous population. Despite this, meta-analyses suggest advantages for BC. Therefore, BC should be preferred, especially in patients at increased risk of acute kidney injury, with acidemia and/or hyperchloremia. Except for specific indications (e.g., in patients with cirrhosis, sepsis resuscitation after initial volume therapy with BC), albumin should not be used. There is clear evidence of harm from hydroxyethyl starch in intensive care patients.

Enhancing the Pitting Corrosion Resistance of Fe‐36Ni Invar Alloy via Introducing Mg

The primary objective of this study is to investigate the corrosion resistance of Fe‐36Ni Invar alloys with varying Mg contents in a 3.5 wt% sodium chloride solution. The electrochemical results reveal that the incorporation of Mg amplified the corrosion behavior of Fe‐36Ni Invar alloy. The inclusion compositions undergo a transformation with the increase of Mg content, evolving from MnO–MnS in 0 Mg alloy to MnO–MnS–MgO in 0.0015 Mg alloy, and ultimately to MnS–MgO–MgS in 0.0030 Mg alloy. During the corrosion process, the small‐sized MnS–MgO–MgS inclusions exhibit greater stability compared to the MnO–MnS inclusions, rendering them less susceptible to attack and dissolution. Adding Mg diminishes the size and number density of inclusions, which effectively decreases the susceptibility to pitting initiation. The introduction of Mg refines the microstructure and elevates the fraction of twin boundaries, which also is responsible for the enhancement of corrosion resistance.

Lyophilization strategy to synthesize ultrafine NaCl template for preparation of photocatalytic BiOCl nanoplates via chemical vapor deposition

Two-dimensional (2D) bismuth oxychloride (BiOCl) has attracted increasing attention in nanoelectronics, catalysis, energy storage, and the environment, attributed to its wide indirect band gap and large surface area. However, the imprecise control of the catalytic site on the substrate makes it challenging to produce 2D BiOCl in large quantities economically. Here, we developed lyophilization to create ultrafine NaCl templates to obtain a higher yield of 2D BiOCl nanoplates than traditional substrates using a chemical vapor deposition (CVD) method. In contrast to ball milling or recrystallization, lyophilization can produce the sodium chloride (NaCl) in the ice lattice domain, resulting in ultrafine NaCl particles after removing water. Moreover, the NaCl particles synthesized by lyophilization showed lower crystallinity with partially distorted structures, such as twisted octahedral structures and the structure with Na+ separated from other atoms by an ice lattice. In addition, our method offers an opportunity to introduce and engineer the oxygen vacancies (OVs) on 2D BiOCl to narrow the band gap, improve the separation of photogenerated carriers, and enhance their photocatalytic efficiency by 17.2 times. Thus, our work opens a new avenue to produce 2D BiOCl by tuning the substrate in CVD growth and inspires a new strategy to promote the performance of 2D photocatalysts.