Na-carboxymethyl Cellulose Research Articles

PH Sensitive Dual Cross‐Linked Anionic and Amphoteric Interpenetrating Network Hydrogels for Adsorptive Removal of Anionic and Cationic Dyes

AbstractThe contamination of water by organic dye compounds are worldwide environmental problem due to their highly toxic nature. To address this environmental issue, a simple technique with highly efficient dye removal was developed to prepare pH‐ sensitive dual‐crosslinked anionic and amphoteric interpenetrating network (IPN) hydrogels based on Na‐carboxymethyl cellulose (Na‐CMC) using jute stick‐based cellulose. Crosslinked Na‐CMC and crosslinked κ‐carrageenan (KC) were interlaced by H‐bonding in anionic IPN hydrogel (An‐gel), but crosslinked Na‐CMC and crosslinked Chitosan (CS) were interlaced by electrostatic interaction in amphoteric IPN hydrogel (Am‐gel). In various operating conditions (pH, temperature, etc.) An‐gel displayed a higher number of swelling ratios of about 2560% at pH 7.2 and Am‐gel of about 1874% at pH 5.5. Based on the point of zero charge, An‐gel achieved the maximum removal efficiency of 81.62 % for methylene blue (MB) at pH 7.2, whereas Am‐gel achieved 85.38% removal efficiency for eosin yellow (EY) at pH 5.5. The adsorption kinetics of IPN hydrogels followed a pseudo‐second order model and best fitted by Langmuir isotherm model. The removal efficiency of MB and EY decreased slightly with increasing temperature. The values of ΔH°, ΔG°, and ΔS° indicated an exothermic, spontaneous, and disordered adsorption process.

X-ray structural study of membranes based on Na-CMC and CS-Cl for water purification

The level of environmental pollution is increasing year by year. Solving this problem requires the development and application of new effective technologies and materials for wastewater treatment and processing of accumulated waste. One of the alternative directions is membrane technologies, in particular, the development of biodegradable nanocomposite membranes. Anionic polyelectrolyte – Na-carboxymethyl cellulose with molecular weight Mw ~ 90000 and cationic polyelectrolyte – low molecular weight chitosan were used to create these membranes. Polymeric membranes were formed by mixing aqueous solutions of chitosan hydrochloride and Na-carboxymethylcellulose in different ratios. Analysis of X-ray diffractograms of polyelectrolyte complexes showed that with a gradual increase in the content of cationic polyelectrolyte from 5 % to 17 %, the structure of polyelectrolyte complexes changes dramatically. Whereas, the diffractograms of polyelectrolyte complexes with chitosan content from 29 % to 84 % are similar. The effectiveness of the obtained membranes was tested on a barometric device at different pressures. It was established that membranes based on polyelectrolyte complexes with a stoichiometric ratio of anionic and cationic polyelectrolytes turned out to be the most productive. The degree of water purification was checked by indicators of color selectivity. The obtained results allow us to conclude that with an increase in the duration of purification, the selectivity increases

Aqueous Processing of Ni-Rich NMC Electrodes with High Areal Capacity and Excellent Long-Term Cycling Stability

Research efforts in the last three decades have resulted in a steady increase in the energy density of Li-ion batteries (LIBs), leading to their integration into electric vehicles (EVs). Therefore, car manufacturers have increased the number of EVs in their fleets and successfully introduced them to the mass market, with 200M of EVs expected to be sold by 2025 [1] . In such a fast-growing market, the cost and environmental impact of LIB production play major roles. A crucial step in battery manufacturing is the processing of active materials to produce electrode coatings. Commercial cathode electrodes (i.e. LiNixMnxCoxO2 (NMC), LiNi0.5Mn1.5O4 (LNMO) etc.) are still largely processed using organic solvents, specifically N-methyl-2-pyrrolidone (NMP), with poly(vinylidene difluoride) (PVDF) as a binder. However, the NMP-PVDF combination has many disadvantages [2]. Firstly, the binder is considerably more expensive than water-soluble binders and not easy to dispose of at the end of the battery life. Secondly, NMP is costly and toxic, and being a volatile organic compound (VOC), needs solvent recovery at commercial scale. On the other hand, water-soluble binders such as Na-carboxymethylcellulose (Na-CMC) and styrene butadiene rubber (SBR) are not only cheaper but also easier-to-recycle [3]. Additionally, the use of water as a solvent would remove the need for solvent recovery. It is then clear that switching to water-based processing for cathode materials would decrease cost and improve the environmental sustainability of LIB production. Nevertheless, aqueous cathode processing has many challenges [2], the major one being the instability of the active material in water. The leaching of Li+ ions gives rise to very high pH (~ 12) values which, in turn, leads to the corrosion of the current collector (aluminium) and gas evolution during coating. Consequently, electrodes usually show cracks and pinhole defects and exhibit poor flexibility. These issues are even more enhanced for thick coatings, which are needed to achieve high energy density cells. Therefore, the electrochemical performance of water-based cathode electrodes is generally poorer than that for NMP-based electrodes.In this work, the effect of additions of phosphoric acid (H3PO4) on slurry rheology, adhesion strength, electrode morphology and the electrochemical performance of Ni-rich NMC cathodes prepared via water-based processing was investigated. To effectively bridge the gap between lab-scale investigations and industrially applicable procedures, pH control of the slurries and roll-to-roll electrode coating were performed at the pilot scale, and only electrodes exhibiting commercially relevant areal capacities (~ 4-4.5 mAh cm-2), high active material contents (> 90%) and low binder amounts (3 wt.%) were investigated. Phosphoric acid was added in amounts between 1.5 and 3 wt.%, and a fast-mixing procedure was developed to minimize the contact time between the NMC particles and water. The pH evolution over time showed that at least 2 wt.% of H3PO4 is required to keep the pH below the corrosion threshold of aluminium (pH < 9) for 6-8 hours, which is a usual time scale for industrial electrode processing. All slurries showed shear thinning behaviour with the viscosity of the water-based slurries being slightly lower than that for NMP-based slurries at the shear rate used for coating. Optical micrographs of coated electrodes showed no evidence of defects or agglomerates and good homogeneity. The adhesion to the current collector decreased with increasing amount of acid, e.g., electrodes prepared using 3 wt.% H3PO4 showed cracks at the edges of the coating and delamination.The long-term performance and rate capability of the electrodes were investigated in full-cell configuration vs graphite (coin-cell setup). NMC cathodes prepared with 1.5 wt.% acid showed a specific capacity of around 180 mAh g-1 at C/10 and 165 mAh g-1 at C/3. The specific capacity of the cells decreased with increasing amount of acid. The water-based and NMP electrodes retained around 50% and 60% of the initial capacity at 1C, respectively. Furthermore, electrodes prepared with 1.5 wt.% and 2.25 wt.% acid achieved a capacity retention above 90% after 500 cycles, which is comparable to NMP-based electrodes. In a further step, the production of the electrodes was upscaled in order to manufacture NMC/graphite pouch cells of 10 Ah capacity. These cells showed excellent cycling stability, reaching 80% SoH after 1500 cycles.

Effective wound healing agents based on N-alkenylimidazole zinc complexes derivatives: future prospects and opportunities

Introduction: The therapeutic effect of commercially available domestic and foreign drugs for the treatment of various skin injuries is far from optimal. These drugs have no universal effects, but cause pronounced side reactions. There is a clear demand for development of innovative wound-healing drugs with antimicrobial properties, which increase the natural protective function of the skin. Pharmaceutical compounds with zinc nanoparticles have been increasingly recognized as a promising therapeutic direction. These drugs can easily penetrate into damaged tissues and stimulate metabolic processes. Zinc complexes with imidazole derivatives are of a particular interest. Imidazole acts as a structural fragment of many natural physiologically active compounds, thus providing targeted delivery of this essential trace element into the wound for inclusion in the multicascade mechanism of wound healing. The aim of the study: to provide experimental evidence for effects of recently developed zinc complexes with N-alkenylimidazole as wound healing agents. Materials and Methods: Wound-healing effects of six 1% gels containing distinct N-alkenylimidazole zinc complexe derivatives based on the Na-carboxymethylcellulose (Na-CMC) were comparatively studied in 128 outbred white rats of both genders. The Na-CMC-based Zinc Sulfate 1% gel, Methyluracil and Solcoseryl served as reference drugs. After performing the local tolerance study of zinc complexes, linear and planar sterile wounds of comparable size were inflicted in anesthetized animals. The degree of healing was evaluated on the day 8 and day 28 after the treatment start by wound sizes and histological examination of inflammatory response, epithelization, granulation tissue, angiogenesis, and necrosis. The skin microcirculation system was evaluated using the laser Doppler Flowmetry (LDF), whereby the blood flow indicators were recorded 30 and 60 minutes after intraperitoneal administration of the trial compound. The antimicrobial activity of the zinc compounds was determined in vitro by means of their minimum inhibitory concentration suppressing the bacteria and fungi growth using the double serial dilution method in liquid culture media. The statistical data processing was performed using the Statistica 12 software package. Results and Discussion: In the linear wound model, all animals treated with either of six experimental zinc compounds showed almost complete reduction in wound size (92-100%, p&lt;0.05) on the day 8, significantly exceeding the wound healing in the control animals (reduction by 67-88 %, p&lt;0.05) and effects of the reference drugs (reduction by 83-86%, p&lt;0.05). In the planar wound model, the most significant wound healing effect was reached by using the gel containing N-isopropenylimidazole zinc diacetate (encoded as Pilim-1). The respective histological examination showed signs of complete epithelialization, absence of destructive changes in the epidermis, restoration of skin appendages and presence of mature granulation tissue. Intraperitoneal Pilim-1 administration at a dose of 20 mg/kg improved microcirculation in the rat skin, as judged by significant effects on perfusion and the amplitudes of the isolated rhythms of the LDF-gram. In addition, Pilim-1 exerted a moderate bacteriostatic and fungistatic activity, which was 2 times greater than the antimicrobial activity of Metronidazole. Conclusion: Topical application of gels containing 1% N-alkenylimidazole zinc complex derivatives accelerates the healing of uninfected linear and planar wounds in comparison with the established reference drugs. The Pilim-1 zinc compound exhibited the most pronounced therapeutic effect. The observed in vitro antimicrobial action of Pilim-1 is of further interest for potential implications in treatment of infected skin wounds. The regenerative effect of this substance opens prospects for development of new drugs with improved wound healing properties.

Antidiabetic Activity of the Methanol Fraction of Sungkai Leaves (Peronema canescens Jack)

Diabetes Mellitus (DM) is one of a group of metabolic diseases characterized by hyperglycemia caused by a disturbance in insulin so that blood glucose levels increase. Prevention of absorption of blood glucose by the intestine can be done with the help of the enzyme α-glucosidase. Based on the results of phytochemical tests, it is known that the methanol fraction of sungkai leaves contains flavonoid compounds. The Fourier Transform Infra-Red (FTIR) spectrum showed that the isolates had phenolic O-H groups (3,354.53 cm1 , 1,359.28 cm-1 ), aromatic C=C group (1,615.48 cm-1 ), C-O-C ether group (1,046.60 cm-1 ) and aromatic C-H group (822.21 cm-1 ). In vivo antidiabetic activity test was carried out using test animals of white male mice which were induced by alloxan. Antidiabetic testing was carried out using 6 treatment groups with glibenclamide, Na-Carboxymethyl cellulose (NaCMC) 0.5%, dose 175 mg/kgBW, 350 mg/kgBW, 700 mg/kg Body Weight (BW) and isolates 2 mg/kgBW. The results showed that the methanol fraction of sungkai leaves had the best antidiabetic activity at a dose of isolate and 700 mg/kgBW which was able to reduce blood glucose levels by 42.20% and 42.00%. In vitro antidiabetic testing through αglucosidase enzyme inhibition mechanism did not show any antidiabetic activity at concentrations of fractions 5, 10, 25, 50 and 100 ppm.

High Areal Capacity Ni-Rich NMC Water-Based Electrodes with Excellent Long-Term Cycling Stability

Research efforts in the last three decades have resulted in a steady increase in the energy density of Li-ion batteries (LIBs), leading to their integration into electric vehicles (EVs). Therefore, car manufacturers have increased the number of EVs in their fleets and successfully introduced them to the mass market, with 200M of EVs expected to be sold by 2025 [1] . In such a fast-growing market, the cost and the environmental impact of LIB production play major roles. A crucial step in battery manufacturing is the processing of anode and cathode active materials to produce electrode coatings. While commercial anode electrodes (i.e. graphite, silicon-graphite) are already water-based, cathode electrodes (i.e. LiNixMnxCoxO2 (NMC), LiNi0.5Mn1.5O4 (LNMO) etc.) are still largely processed using organic solvents, specifically N-methyl-2-pyrrolidone (NMP), with poly(vinylidene difluoride) (PVDF) as a binder. However, the NMP-PVDF combination has many disadvantages [2]. Firstly, the binder is considerably more expensive than water-soluble binders and not easy to dispose of at the end of the battery life. Secondly, NMP is also costly and toxic, and being a volatile organic compound (VOC), needs solvent recovery at commercial scale. On the other hand, water-soluble binders such as Na-carboxymethylcellulose (Na-CMC) and styrene butadiene rubber (SBR) are not only cheaper but also easier-to-recycle [3]. Additionally, the use of water as a solvent would remove the need for solvent recovery. It is then clear that switching to water-based processing for cathode materials would decrease cost and improve the environmental sustainability of LIB production. Nevertheless, aqueous cathode processing has many challenges [2], the major one being the instability of the active material in water. The leaching of Li+ ions gives rise to very high pH (~ 12) values which, in turn, leads to the corrosion of the current collector (aluminium) and gas evolution during coating. Consequently, electrodes usually show cracks and pinhole defects and exhibit poor flexibility. These issues are even more enhanced for thick coatings, which are needed to achieve high energy density cells. Therefore, the electrochemical performance of water-based cathode electrodes is generally poorer than that for NMP-based electrodes.In this work, the effect of additions of phosphoric acid (H3PO4) on slurry rheology, adhesion strength, electrode morphology and the electrochemical performance of Ni-rich NMC cathodes prepared via water-based processing was investigated. To effectively bridge the gap between lab-scale investigations and industrially applicable procedures, pH control of the slurries and roll-to-roll electrode coating were performed at the pilot scale, and only electrodes exhibiting commercially relevant areal capacities (~ 4 mAh cm-2), high active material contents (> 90%) and low binder amounts (3 wt.%) were investigated. Phosphoric acid was added in amounts between 1.5 and 3 wt.%, and a fast-mixing procedure was developed to minimize the contact time between the NMC particles and water. The pH evolution over time showed that at least 2 wt.% of H3PO4 is required to keep the pH below the corrosion threshold of aluminium (pH < 9) for 6-8 hours, which is a usual time scale for industrial electrode processing. All slurries showed shear thinning behaviour with the viscosity of the water-based slurries being slightly lower than that for NMP-based slurries at the shear rate used for coating. Optical micrographs of coated electrodes showed no evidence of defects or agglomerates and good homogeneity. The adhesion to the current collector decreased with increasing amount of acid, e.g., electrodes prepared using 3 wt.% H3PO4 showed cracks at the edges of the coating and delamination.The electrochemical performance of the electrodes was studied in full-cell configuration vs graphite. NMC cathodes prepared with 1.5 wt.% acid showed a specific capacity of around 180 mAh g-1 at C/10 and 165 mAh g-1 at C/3. The specific capacity of the cells decreased with increasing the acid amount. However, electrodes prepared with 1.5 wt.% and 2.25 wt.% acid showed excellent cycling stability, achieving a capacity retention above 90% after 500 cycles, which is comparable to NMP-based electrodes.

Internal erosion and permeability of Na CMC-treated and PAM-treated geosynthetic clay liners

This paper investigates the occurrence of internal erosion and the variation of the permeability of geosynthetic clay liner (GCL) with respect to its geotextile component, polymer type and polymer amount added to its bentonite component, hydraulic head, and subgrade material by performing extensive triaxial permeability tests on the GCL specimens. To do this, Na carboxymethyl cellulose (CMC) and polyacrylamide (PAM) were treated with the bentonite component of the GCLs. Then, the GCLs were placed over poorly graded gravel (GP) and poorly graded sand (SP). Consequently, they were tested with two different woven geotextile components under the hydraulics heads of 0.3 m and 10 m. Results showed that only GCLs tested with woven geotextile, having lower tensile strength, lower mass/area and lower thickness over the gravel at a hydraulic head of 10 m, experienced internal erosion. Critically, Na CMC and PAM treatment caused 2–2.5 orders of magnitude decrease in the permeability. Actually, 2% Na CMC and 1% PAM treatment by dry mass were found to be the optimum polymer contents. Both the environmentally friendly biopolymer Na CMC and the synthetic polymer PAM can effectively be treated with Ca bentonite to enhance the hydraulic performance of the GCLs.

STRUCTURE, MORPHOLOGY AND ANTIMICROBIEL PROPERTIES NANOCOMPOSITES BASED ON POLYELECTROLYTE COMPLEXE AND METALIC NANOPARTICLES ARGENTUM AND CUPRUM

Using metods of x-ray diffraction (XRD), transmission electron microscopy (TEM) and antimocrobial properties with test-bacteriums E. coli and S. aureus vere investigated nanocomposites type polymer-metal based on stoichiometric polyelectrolyte complexe (PEC) and metalic nanoparticles argentum and cuprum. Samples PEC with amorphous structure vere formated based on polyelectrolytes natural parentage: Na-carboxymethyl cellulose and β-cyclodextrin that functionalyzed amino grups. Using sorbtion by samples PEC of ions salts AgNO3 and CuSO4 , that losung in water (concentration 0,1 mole/l) vere formated samples of triples polyelectrolyte-metalic coplexes (TPMC). By using method XRD showed existence in volyme TPMC of areas (with amorphous strucrure) of fragmented macromoleculare coils of PEC (macroligande) that co-ordinated as cations Сu2+, so cations Ag+. In result of chemical reduced (using salt NaBH4) this cations transition metalі in volum TPMC, vere formed polymer– metalic nanocomposites with metal nanoparticles argentum and cuprum, what shown using metod XRD. By using metod TEM vere installed, what in nanocomposites metalic nanoparticles cuprum whose middle size 12,4 nm, whereas nanoparticles argentum – 4,3 nm. Antimicrobial tests polymer-metal nanocomposites shown, that antimicrobial properties possess nanoparticles argentum and cuprum.

Water-Based LiNi0.83Co0.12Mn0.05O2 Electrodes with Excellent Cycling Stability Fabricated Using Unconventional Binders

Water-based processing of positive Li-ion battery electrodes is becoming increasingly important to enable green and sustainable electrode production. Although already widely established for carbon-based anodes, the water-based coating process still poses challenges if applied to cathode materials containing high contents of nickel. Positive electrodes using Ni-rich cathode materials with areal capacities of 2.6 mAh cm−2 were prepared either with Epoxy, a polyisocyanate-based (ICN) binder or polyacrylic acid (PAA). All three binders can cross-link with Na-carboxymethyl cellulose (CMC) used in the formulation. In bi-layer pouch-cells, such cathodes based on Epoxy or ICN binders reach an excellent long-term 1 C charge/discharge capacity retention of 85% and 88% after 1000 cycles, whereas electrodes with PAA only reach 65%. Post-mortem analysis of cells after cycling suggests aging of the cathode electrode as main source of deactivation. According to scanning electron microscopy data, the aqueous processing does not lead to a stronger cracking of the secondary CAM particles and no enhanced dissolution of transition metals was found on the anode side. However, a stronger increase in charge-transfer impedance is observed for the aged water-based cathodes. Thus, the formation of a blocking surface layer appears to be the major reason for performance deterioration with increasing cycle number.

Evaluation of lyophilized royal jelly and garlic extract emulgels using a murine model infected with methicillin-resistant Staphylococcus aureus

The limited therapeutic options associated with methicillin-resistant Staphylococcus aureus (MRSA) necessitate search for innovative strategies particularly, use of natural extracts such as lyophilized royal jelly (LRJ) and garlic extract (GE). Therefore, out study aimed to formulate emulgels containing different concentrations of both LRJ and GE and to evaluate their activities using a murine model infected with MRSA clinical isolate. Four plain emulgel formulas were prepared by mixing stearic acid/yellow soft paraffin-based O/W emulsion formulae based on Carbopol 940, Na alginate, Na carboxymethylcellulose or Hydroxypropyl methyl cellulose E4. Sodium alginate-based emulgel was selected for preparation of four medicated emulgel formulations combining LRJ and GE at four different concentrations. The selected medicated emulgels were used for the in vivo studies. The emulgel formulated with Na alginate and HPMC (MF3) exhibited optimum smooth homogeneous consistency, neutral pH, acceptable viscosity, spreadability, extrudability values and best storage stability properties. In vivo results revealed that, the wounds infected with MRSA isolate in rates were wet (oozing) and showed pus formation when compared to injured uninfected wounds. MF3 formula containing 4% LRJ and 50% GE showed the maximum wound healing properties, both in the apparent physical wound healing measurements and in the histopathological examination. In conclusion, the medicated emulgel formulation (MF3) prepared with Na alginate was found optimum for topical application. MF3 formula containing 4% LRJ and 50% GE has shown the highest in vivo wound healing capacities. Further clinical studies should be conducted to prove both its safety and efficacy and the potential use in human.

Unveiling the Electrochemical Mechanism of High-Capacity Negative Electrode Model-System BiFeO3 in Sodium-Ion Batteries: An In Operando XAS Investigation.

Careful development and optimization of negative electrode (anode) materials for Na-ion batteries (SIBs) are essential, for their widespread applications requiring a long-term cycling stability. BiFeO3 (BFO) with a LiNbO3-type structure (space group R3c) is an ideal negative electrode model system as it delivers a high specific capacity (770 mAh g-1), which is proposed through a conversion and alloying mechanism. In this work, BFO is synthesized via a sol-gel method and investigated as a conversion-type anode model-system for sodium-ion half-cells. As there is a difference in the first and second cycle profiles in the cyclic voltammogram, the operating mechanism of charge-discharge is elucidated using in operando X-ray absorption spectroscopy. In the first discharge, Bi is found to contribute toward the electrochemical activity through a conversion mechanism (Bi3+ → Bi0), followed by the formation of Na-Bi intermetallic compounds. Evidence for involvement of Fe in the charge storage mechanism through conversion of the oxide (Fe3+) form to metallic Fe and back during discharging/charging is also obtained, which is absent in previous literature reports. Reversible dealloying and subsequent oxidation of Bi and oxidation of Fe are observed in the following charge cycle. In the second discharge cycle, a reduction of Bi and Fe oxides is observed. Changes in the oxidation states of Bi and Fe, and the local coordination changes during electrochemical cycling are discussed in detail. Furthermore, the optimization of cycling stability of BFO is carried out by varying binders and electrolyte compositions. Based on that, electrodes prepared with the Na-carboxymethyl cellulose (CMC) binder are chosen for optimization of the electrolyte composition. BFO-CMC electrodes exhibit the best electrochemical performance in electrolytes containing fluoroethylene carbonate (FEC) as the additive. BFO-CMC electrodes deliver initial capacity values of 635 and 453 mAh g-1 in the Na-insertion (discharge) and deinsertion (charge) processes, respectively, in the electrolyte composition of 1 M NaPF6 in EC/DEC (1:1, v/v) with a 2% FEC additive. The capacity values stabilize around 10th cycle and capacity retention of 73% is observed after 60 cycles with respect to the 10th cycle charge capacity.

Inhibition of myeloid differentiation factor 2 by MAC28 suppresses reactive oxygen species, inflammation and improves mitochondrial function, leading to improved cardiac function in prediabetic rats

Abstract Background Chronic inflammation involves in the left ventricular (LV) dysfunction in high-fat diet (HFD)-induced prediabetes, along with cardiac mitochondrial dysfunction. This involved an activation of myeloid differentiation factor 2 (MD2)/toll-like receptor 4 (TLR4) by lipopolysaccharide, leading to inflammatory cytokines production in the heart. MAC28 is a novel MD2 inhibitor, which had been shown to provide effects against LPS-induced cytokine secretion from macrophages. However, the potential benefits of MAC28 on the LV function and its underlying mechanisms in HFD-induced prediabetic rats are unknown. Purpose We tested the hypothesis that MAC28 improves LV function in prediabetic rats by reducing cardiac oxidative stress, inflammation, and cardiac mitochondrial dysfunction. Methods Male Wistar rats were fed either a normal diet (ND, n=8) or HFD (n=24) for 16 weeks. At week 12, HFD-fed rats developed prediabetes and LV dysfunction. At this time, these HFD-fed rats were divided into 3 treatment groups (n=8/group): 1) vehicle (HFDV; 1% Na-carboxymethyl cellulose; p.o.); 2) MAC28 (40 mg/kg; p.o.); 3) metformin (300 mg/kg; p.o.; a positive control), the ND-fed rats received a vehicle (NDV). Rats were received their treatment for 4 weeks. Then, LV function and heart rate variability (HRV) were examined, and the heart was removed to determinecardiac malondialdehyde (MDA), cardiac inflammation (TNF-α) and mitochondrial function. Results HFD-induced prediabetes, together with depressed HRV and %LV ejection fraction (LVEF) (Fig. 1A). Moreover, cardiac oxidative stress and inflammation overproduction, and cardiac mitochondrial dysfunction was also observed, shown by elevated cardiac MDA, cardiac TNF-α protein levels, and mitochondrial ROS levels, mitochondrial depolarization and swelling (Fig. 1B). Notably, treatment with MAC28 effectively improved HRV and %LVEF and HRV (Fig. 1A), compared to HFDV group. Moreover, MAC28 significantly reduced cardiac MDA levels, cardiac TNF-α protein levels and cardiac mitochondrial dysfunction in HFD-induced prediabetic rats (Fig. 1B). These beneficial effects were also observed in metformin-treated rats (Fig. 1A, B). Conclusion MAC28 exerts cardioprotection in prediabetic rats by reducing cardiac oxidative stress, inflammation, and mitochondrial dysfunction, leading to restoring LV function. Funding Acknowledgement Type of funding sources: Public grant(s) – National budget only. Main funding source(s): This work was supported by the Thailand Science Research and Innovation

PECULIARITIES OF SYNTHESIS AND ANTIMICROBIAL PROPERTIES OF GUANIDINE-CONTAINING CAR-BOXYMETHYLCELLULOSE DERIVATIVES

The article presents data on the synthesis and antimicrobial properties of guanidine-containing carboxymethylcellulose derivatives with different physical and chemical characteristics. The regularities of the reaction of nucleophilic substitution of aldehyde groups of modified Na-carboxymethylcellulose (Na-CMC) by guanidine under different conditions are studied. Based on the results obtained, it was found that the limit replacement of reactive electrophilic groups with nucleophilic reagent depends on the pH value of the medium, molar ratio of guanidine and the degree of oxidation of cellulose ester. By varying the reaction conditions and the number of aldehyde groups in the oxidized Na-CMC composition, the azometin derivatives differing in the content of nitrogen-containing fragments in the polymer chain were obtained. Chemical restoration of labile azomethine bonds was performed and water-soluble derivatives containing strong amino-bound guanidine groups were synthesized. The study shows and substantiates the influence of structural indices (degree of substitution, quantitative guanidine content, pKα values and nature of counterion) of macromolecular systems on antibacterial and antifungal properties. The developed approach of synthesis opens prospects for creation of antimicrobial derivatives with regulated physical and chemical characteristics and set biologically active properties.

ГЕМОДИНАМИКА В ТАЗОВЫХ КОНЕЧНОСТЯХ ПРИ ТРАВМЕ СПИННОГО МОЗГА В УСЛОВИЯХ ПРИМЕНЕНИЯ ПРОТИВОСПАЕЧНОГО ГИАЛУРОНСОДЕРЖАЩЕГО ГЕЛЯ

It is possible to reduce the degree of systemic complications arising in response to spinal cord injury by providing timely medical care. Positive therapeutic effect of intrathecal administration of hyaluron gels is known for such injuries. In turn, these medications can be used as carriers of other medical substances. The aim of the research is to study hemodynamics in hind limbs in case of traumatic spinal cord injury using an anti-adhesion gel which contains Na-carboxymethyl cellulose. Rats’ spinal cord injury at the level of the thoracic section of the spine was simulated and a hyaluronic-containing anti-adhesion absorbable gel was injected into the injury area. Hemodynamics and temperature response of pelvic limb tissues were studied. Heart rate dynamics and general body temperature were assessed. The quantitative data were compared with the physiological norm. The animals were observed for 90 days. No heart rhythm disturbances were noted. During the experiment, hyperthermy of central genesis was recorded, which was characterized by an increase of the total body temperature to a maximum of 37.11 ± 0.6 ° C (p = 0.004) and local temperature - up to 34.48 ± 2.24 ° C (p = 0.002). The phenomena of vasodilatation of the arteries were observed, which were more pronounced after 60 days of the experiment. Further on, the visco-elastic properties of the vessels improved. Difficulties in venous outflow in the created conditions were not found. According to available literature data, when modeling a spinal cord injury without application of antiadhesion hyaluronic medications, vascular disorders are more explicit. Conclusion. The application of a hyaluronic anti-adhesion gel for traumatic spinal cord injury can reduce the intensity of emerging pathological conditions.

Investigation of the antibacterial activity of the nanostructured system of copper sulfate in Na-carboxymethyl cellulose on the example of an indigenous strain of the gram-negative bacterium Esherichia coli

The article provides a study of the antibacterial activity of nanostructured copper sulfate in Nacarboxymethyl cellulose on the example of an indigenous strain of the gram-negative bacterium Esherichia coli by the disk-diffusion method. The study revealed that the modification of the active material increases its biocidal properties by 321.34; 121.5; 369.5; 562.6 and 351.7% with an increase in the weight ratio “core : shell” to 1:2 and concentration from 0.5 to 1% in aqueous suspensions.

BIOTECHNOLOGICAL POTENTIAL OF THE SIBERIAN STRAINS OF BASIDIOMYCETES – PRODUCERS OF LIG-NOLYTIC AND CELLULOLYTIC ENZYMES

The results of a study of the wood-destroying properties of Siberian strains of xylotrophic basidiomycetes (Armillaria, Ganoderma, Fomitopsis, Heterobasidion and Porodaedalea) are presented. The growth parameters and enzymatic activity of the strains were determined during solid-phase and deep cultivation. Fomitopsis pinicola and Ganoderma lucidum are fast-growing fungi on cellulose-, tannin-containing nutrient media, coniferous and deciduous plant substrates (source and hydrodynamically activated). The growth coefficient on media with tannin and Na-carboxymethyl cellulose is more than 45; on plant substrates - more than 30. The strains exhibit a different growth reaction to the preliminary activation of birch sawdust (growth acceleration / growth slowdown / indifference). The maximum wood-destroying activity on wood of A. sibirica noted for the fungi A. borealis, G. tsugae, G. lucidum, F. pinicola, and P. niemelaei. The decrease in substrate mass was 8–11%; the amount of polysaccharides decreased on average 1.4 times mainly due to the fermentolysis of hard-hydrolyzable polysaccharides. High enzymatic activity of fungi observed during solid-phase and deep cultivation with an inducer. The maximum activity of phenol oxidase is characteristic of G. tsugae (1.21 units/g·s); carboxymethyl cellulase – for F.pinicola and G. lucidum strains (11.8 and 10.3 units/ml, respectively); xylanases – for H. abietinum (3.8 u/ml). The maximum accumulation of extracellular protein observed in F. pinicola (0.89 mg/ml). According to the totality of rapid test indicators, quantitative determination of enzymatic activity, growth parameters on lignocellulosic substrates and the degree of wood bioconversion, the most promising producer of lignolytic enzymes in vitro is the Gl4-16A Ganoderma lucidum strain; cellulolytic enzymes – strain Fp6-17 Fomitopsis pinicola.

Sustainable Anodes for Lithium- and Sodium-Ion Batteries Based on Coffee Ground-Derived Hard Carbon and Green Binders

The reuse and recycling of products, leading to the utilization of wastes as key resources in a closed loop, is a great opportunity for the market in terms of added value and reduced environmental impact. In this context, producing carbonaceous anode materials starting from raw materials derived from food waste appears to be a possible approach to enhance the overall sustainability of the energy storage value chain, including Li-ion (LIBs) and Na-ion batteries (NIBs). In this framework, we show the behavior of anodes for LIBs and NIBs prepared with coffee ground-derived hard carbon as active material, combined with green binders such as Na-carboxymethyl cellulose (CMC), alginate (Alg), or polyacrylic acid (PAA). In order to evaluate the effect of the various binders on the charge/discharge performance, structural and electrochemical investigations are carried out. The electrochemical characterization reveals that the alginate-based anode, used for NIBs, delivers much enhanced charge/discharge performance and capacity retention. On the other hand, the use of the CMC-based electrode as LIBs anode delivers the best performance in terms of discharge capacity, while the PAA-based electrode shows enhanced cycling stability. As a result, the utilization of anode materials derived from an abundant food waste, in synergy with the use of green binders and formulations, appears to be a viable opportunity for the development of efficient and sustainable Li-ion and Na-ion batteries.

Abstract 15180: Myeloid Differentiation Factor 2 Inhibitor Improves Left Ventricular Function And Heart Rate Variability Via Attenuating Cardiac Mitochondrial Dysfunction In Pre-diabetic Rats

Introduction: Systemic inflammation is known as a key mediator of left ventricular (LV) dysfunction in pre-diabetic models including obese-insulin resistance. In obese rats, lipopolysaccharide activates myeloid differentiation factor 2 (MD2)/toll-like receptor 4 complex, leading to systemic inflammation. Previously, MD2 inhibitor L6H21 (20 mg/kg) was shown to effectively reduce systemic inflammation in obese mice. However, its potential benefits on the heart and the underlying mechanisms in pre-diabetic obese-insulin resistant rats are unknown. Hypothesis: L6H21 exerts cardiometabolic protection in pre-diabetic rats by improving LV function and heart rate variability (HRV) via reducing cardiac mitochondrial dysfunction. Methods: Male Wistar rats were fed either a normal diet (n=8) or high-fat diet (HFD, n=40) for 12 weeks. In HFD group, rats were divided into 5 groups (n=8/group): 1) vehicle (1% Na-carboxymethyl cellulose), 2) metformin (300 mg/kg, positive control), 3-5) L6H21 at 10, 20, and 40 mg/kg. After 4 weeks of treatments, LV function and HRV were examined. Heart tissue was assessed for mitochondrial function. Results: Pre-diabetic rats had impaired glucose tolerance, depressed HRV, and decreased LV ejection fraction (LVEF), indicating cardiac autonomic imbalance and LV dysfunction. Cardiac mitochondrial dysfunction was also observed, shown by increased mitochondrial ROS levels, mitochondrial depolarization, and mitochondrial swelling. Although L6H21 at 20 and 40 mg/kg improved insulin sensitivity, cardiac autonomic balance, LV function, and mitochondrial function, L6H21 at 40 mg/kg exerted the highest cardioprotective effects, compared to metformin, in pre-diabetic rats by restoring LV function, HRV, and cardiac mitochondrial function (Fig) . Conclusions: L6H21 exerted cardiometabolic protection in pre-diabetic rats by improving insulin sensitivity and cardiac mitochondrial function, leading to restoring LV function.

Drug Delivery Polymer Systems for Ophthalmic Administration of Anti- Viral Agents.

Ophthalmology applies many different ways of delivering effective drugs to eye tissue for the prevention and treatment of diseases of various etiologies. The vast majority of ophthalmologists use traditional instillation of drugs in an eye disease. However, this method has a number of drawbacks, in particular, during instillation of drip forms of drugs, up to 80% of the drug is lost due to withdrawal of its tear fluid and rapid absorption by the mucous membrane of the eyes, which necessitates their frequent instillation to maintain the therapeutic concentration in the eyeball. The use of polymeric forms of bio soluble antiviral eye medicinal films of prolonged form in ophthalmic practice would allow introducing the active substance less often while maintaining its therapeutic concentration, reducing the dosage of the drug and the negative effect of frequent instillation. A method of obtaining polymeric forms of bio soluble nanostructured ophthalmic medicinal films is based on a composition of water-soluble Na-carboxymethylcellulose (Na-CMC) with a degree of substitution of 0.85 ± 2 and a polymerization degree of 630 ± 20 and a derivative of Nacarboxymethylcellulose containing a chemically bound natural polyphenol-gossypol in an amount of polymerization-630 ± 20 and a derivative of Na-carboxymethylcellulose containing chemically bound natural polyphenol-gossypol in an amount of 0 mole% (sodium salt of 2,3-diethoxy - 6 - O - carboxymethyl- (1 → 4) -β - D - ox glucose - oxy-hydroxyl - 2 - ethyl- (1 → 4) -β - D - ox glucose - diethyl hydroxyl-poly -2 - O - carboxymethyl- (1 → 4) - β - D glucose -2.6 - O -dicarboxymethyl- (1 → 4) -β - D glucose); this is the substance of the antiviral drug "CelAgrip". In this work the possibility of regulating the bio scission time and physicochemical parameters of ocular medicinal films has been shown, by varying the degree of substitution and degree of polymerization of sodium carboxymethylcellulose and the pH of their aqueous solutions. The most promising in terms of the prolongation effect and the absence of an irritating effect and transparency are films, obtained from solutions of the polymer-polymer composition of Na- CMC - a "CelAgrip" substance of a spherical shape with embedded nanoparticles of size 14-52 nm and a pH value of 7.6.

Application of metal nanoparticles for pre-sowing treatment of spring barley seeds

This paper presents data on the pre-sowing treatment of spring barley (Hordeum vulgare L.) seeds by polymer coating with metal nanoparticles (NPs) affecting on seed germination and morphometric parameters of seedlings. Metal NPs [Fe (56.0 ± 0.9 nm, phase composition: Fe0 -27.9 ± 2.1%, Fe3O4 - 72.1 ± 3.6%); Zn (60.6 ± 3.7 nm, phase composition: Zn0 - 100%); Cu (65.0 ± 1.2 nm, phase composition: Cu0 - 100%)] were incorporated into a polymer coating about 10 microns thick, consisting of Na-carboxymethyl cellulose (Na-CMC) and polyethylene glycol-400 (PEG-400), with a dye rhodamine 6G (Rh6G). We developed and studied polymer compositions as with individual NPs in concentrations 10-4% - 10-10% and their combinations. To compare effects of NPs with metal ions, we tested polymer film coating with metal sulfates in equivalent amounts. Pre-sowing treatment of barley seeds with metal NPs or metal ions in the polymer coating affected germination, fresh green and root mass (FM and RM) of seedlings. Film thickness was less than 10% of the caryopsis shell. The surface of seeds treated with the polymer composition was uniform. The defects and irregularities were smoothed. There were no significant differences in the endosperm structure on sections of the treated and control samples. Iron, zinc and copper NPs composition at 10-8%, 10-4% and 10-8% concentrations were the best in laboratory experiments. In the field trials, it stimulated barley crop yields and decreased the moisture content of the bunker grain compared with the control.