N-carboxyanhydride Research Articles

Syntheses of Polypeptides and Their Biomedical Application for Anti-Tumor Drug Delivery.

Polypeptides have attracted considerable attention in recent decades due to their inherent biodegradability and biocompatibility. This mini-review focuses on various ways to synthesize polypeptides, as well as on their biomedical applications as anti-tumor drug carriers over the past five years. Various approaches to preparing polypeptides are summarized, including solid phase peptide synthesis, recombinant DNA techniques, and the polymerization of activated amino acid monomers. More details on the polymerization of specifically activated amino acid monomers, such as amino acid N-carboxyanhydrides (NCAs), amino acid N-thiocarboxyanhydrides (NTAs), and N-phenoxycarbonyl amino acids (NPCs), are introduced. Some stimuli-responsive polypeptide-based drug delivery systems that can undergo different transitions, including stability, surface, and size transition, to realize a better anti-tumor effect, are elaborated upon. Finally, the challenges and opportunities in this field are briefly discussed.

Facile Preparation of Polysaccharide-Polypeptide Conjugates via a Biphasic Solution Ring-Opening Polymerization.

Polysaccharide-polypeptide conjugates have gained a broad interest in mimicking the structure and bioactivity of peptidoglycans or proteoglycans for biomedical applications. Efficient and precise preparation of the conjugates is challenging and unresolved, mainly because of the mismatched solubility between polysaccharide initiators and N-carboxyanhydrides (NCAs), which frequently results in competing side reactions and oligomeric polypeptide chain. Herein, we report a facile and efficient strategy to prepare the conjugates with well-controlled polypeptide chain length (lp) directly from unmodified polysaccharides via a biphasic solution ring-opening polymerization. The effect of lp on surface antibacterial properties has been investigated. Elongating the lp can significantly potentiate the antibiofilm property of the conjugate coatings. Our results may provide opportunities to develop various polypeptide-based conjugates with well-defined structures toward versatile uses.

Bioinspired Polypeptide Photonic Films with Tunable Structural Color.

We report a new synthetic strategy of combining N-carboxyanhydride (NCA) chemistry and photonic crystals for the fabrication of polypeptide structural color films. Driven by surface-initiated ring-opening polymerization, the di-NCA derivative of l-cystine (Cys) is introduced to replicate the functionalized colloidal crystal templates and construct freestanding P(Cys) films with tunable structural color. Furthermore, the feasibility of preparing patterned polypeptide photonic films is demonstrated via template microfabrication. Because of the incorporation of l-glutamate (Glu) components, the P(Cys-co-Glu) co-polypeptide films are endowed with a visual color responsiveness toward pH changes. Additionally, the polypeptide photonic films show on-demand degradability. Given the large family of amino acid building blocks, this powerful and versatile approach paves the way for chemical derivatization of multifunctional peptide-based optical platforms.

Composition-dependent wettability of nature-inspired homo poly(amino acid) coating and its influences on bacterial adhesion

A variety of natural proteins have shown anti-adhesive functionality against the non-specific adsorption by proteins and bacteria. A deep understanding of the contribution of amino acid composition to the antifouling performance of a natural protein is crucial for engineering a protein-based coating layer. Herein, we synthesized five types of homo poly(amino acid)s via the ring-opening polymerization of α-amino acid N-carboxy anhydride (NCA) to include exclusively one type of amino acid from lysine (K), glutamic acid (E), tyrosine (Y), alanine (A), and phenylalanine (F). Homo poly(amino acid)s were covalently immobilized on the surfaces of quartz and polyurethane (PU), respectively. The amino acid composition effects on the wetting and anti-bacterial adhesion of a homo poly(amino acid) coating layer were evaluated. We found that the wettability of homo poly(amino acid) coating layers exhibited a dependence on the intrinsic properties of amino acid side-chain, such as the hydration free energy and dipole moment of side-chain. The activity of a homo poly(amino acid) coating layer against bacterial adsorption was found to be independent of the wetting property of the amino acid side-chain. Our findings are different from the conventional opinion that the hydration property of a material surface coating layer correlates to its anti-bacterial functionality, emphasizing the complexity of the amino acid composition contribution to the activity against the non-specific adsorption of bacteria for a protein-mimicking system.

Water-assisted and protein-initiated fast and controlled ring-opening polymerization of proline N-carboxyanhydride.

The production of polypeptides via the ring-opening polymerization (ROP) of N-carboxyanhydride (NCA) is usually conducted under stringent anhydrous conditions. The ROP of proline NCA (ProNCA) for the synthesis of poly-L-proline (PLP) is particularly challenging due to the premature product precipitation as polyproline type I helices, leading to slow reactions for up to one week, poor control of the molar mass and laborious workup. Here, we report the unexpected water-assisted controlled ROP of ProNCA, which affords well-defined PLP as polyproline II helices in 2–5 minutes and almost-quantitative yields. Experimental and theoretical studies together suggest the as-yet-unreported role of water in facilitating proton shift, which significantly lowers the energy barrier of the chain propagation. The scope of initiators can be expanded from hydrophobic amines to encompass hydrophilic amines and thiol-bearing nucleophiles, including complex biomacromolecules such as proteins. Protein-mediated ROP of ProNCA conveniently affords various protein-PLP conjugates via a grafting-from approach. PLP modification not only preserves the biological activities of the native proteins, but also enhances their resistance to extreme conditions. Moreover, PLP modification extends the elimination half-life of asparaginase (ASNase) 18-fold and mitigates the immunogenicity of wt ASNase >250-fold (ASNase is a first-line anticancer drug for lymphoma treatment). This work provides a simple solution to a long-standing problem in PLP synthesis, and offers valuable guidance for the development of water-resistant ROP of other proline-like NCAs. The facile access to PLP can greatly boost the application potential of PLP-based functional materials for engineering industry enzymes and therapeutic proteins.

Ion-Triggered Hydrogels Self-Assembled from Statistical Copolypeptides.

Statistical copolypeptides comprising lysine and tyrosine with unprecedented ion-induced gelation behavior are reported. Copolypeptides are obtained by one-step N-carboxyanhydride (NCA) ring-opening polymerization. The gelation mechanism is studied by in situ SAXS analyses, in addition to optical spectroscopy and transmission electron microscopy (TEM). It is found that the gelation of these statistically polymerized polypeptides is due to the formation of stable intermolecular β-sheet secondary structures induced by the presence of salt ions as well as the aggregation of an α-helix between the copolypeptides. This behavior is unique to the statistical lysine/tyrosine copolypeptides and was not observed in any other amino acid combination or arrangement. Furthermore, the diffusion and mechanical properties of these hydrogels can be tuned through tailoring the polypeptide chain length and ion strength.

Biomimetic Glycosylated Polythreonines by N-Carboxyanhydride Polymerization.

Glycosylated threonine (Thr) is a structural motif found in seemingly disparate natural proteins from deep-sea collagen to mucins. Synthetic mimics of these important proteins are of great interest in biomedicine. Such materials also provide ready access to probe the contributions of individual amino acids to protein structure in a controlled and tunable manner. N-Carboxyanhydride (NCA) polymerization is one major route to such biomimetic polypeptides. However, challenges in the preparation and polymerization of Thr NCAs have impeded obtaining such structures. Here, we present optimized routes to several glycosylated and acetylated Thr NCAs of high analytical purity. Transition metal catalysis produced tunable homo-, statistical, and block-polypeptides with predictable chain lengths and low dispersities. We conducted structural work to examine their aqueous conformations and found that a high content of free OH Thr induces the formation of water-insoluble β-sheets. However, glycosylation appears to induce a polyproline II-type helical conformation, which sheds light on the role of glyco-Thr in rigid proteins such as mucins and collagen.

Cross-Linkable Polyion Complex Micelles from Polypept(o)ide-Based ABC-Triblock Copolymers for siRNA Delivery.

ABC-type triblock copolymers are a rising platform especially for oligonucleotide delivery as they offer an additional functionality besides the anyhow needed functions of shielding and complexation. The authors present a polypept(o)ide-based triblock copolymer synthesized by amine-initiated ring-opening polymerization (ROP) of N-carboxyanhydrides (NCAs), comprising a shielding block A of polysarcosine (pSar), a poly(S-ethylsulfonyl-l-cystein) (pCys(SO2 Et)) block B for bioreversible and chemo-selective cross-linking and a poly(l-lysine) (pLys) block C for complexation to construct polyion complex (PIC) micelles as vehicle for small interfering RNA (siRNA) delivery. The self-assembly behavior of ABC-type triblocks is investigated to derive correlations between block lengths of the polymer and PIC micelle structure, showing an enormous effect of the β-sheet forming pCys(SO2 Et) block. Moreover, the block enables the introduction of disulfide cross-links by reaction with multifunctional thiols to increase stability against dilution. The right content of the additional block leads to well-defined cross-linked 50-60nm PIC micelles purified from production impurities and determinable siRNA loading. These PIC micelles can deliver functional siRNA into Neuro2A and KB cells evaluated by cellular uptake and specific gene knockdown assays.

Polyoxometalate-polypeptide nanoassemblies as peroxidase surrogates with antibiofilm properties.

Developing artificial metalloenzymes that possess a superior performance to their natural counterparts is an attractive concept. Polyoxometalates (POMs) are a class of anionic molecular metal-oxides with excellent redox properties and bioactivity. We have recently introduced "POMlymers" - covalently conjugated POM-peptide hybrid materials - where the polypeptide chain is obtained through a ring-opening polymerisation (ROP) of α-amino acid N-carboxyanhydrides (NCA) on an inorganic POM scaffold. Attracted by the idea of preparing artificial metalloenzymes, here we report the supramolecular self-assembly of POMlymer hybrids into nanoparticles where an optimal environment for catalysis is created. Our results demonstrate that the self-assembly of covalent POMlymers, enhances the peroxidase-like activity of the parent POM anion whereas, in contrast, the catalytic activity for nanoparticles obtained by ionic self-assembly of the same peptide and POM components practically disappears. Furthermore, POMlymer nanoparticles also present antimicrobial and antibiofilm activity against the skin bacterium Staphylococcus epidermidis; whereas, ionic POM-peptide hybrids significantly increase biofilm production and endogenous production of reactive oxygen species. In summary, we present the self-assembly of POMlymer hybrids into nanoparticles and a combination of peroxidase activity and microbiology assays that show that the POM-peptide covalent bond is essential for the stability of the self-assembled nanoparticles and therefore for their catalytic and biological activity.

Influence of the block copolypeptide surfactant structure on the size of polypeptide nanoparticles obtained by mini emulsion polymerisation

Polypetide nanoparticles obtained by miniemulsion polymerisation of amino acid N-carboxyanhydrides (NCA) are a novel class of tuneable bio-derived functional nano materials for potential applications in nutraceutics, agriculture, and medicine.

Tunable Hydrogels with Improved Viscoelastic Properties from Hybrid Polypeptides

Hydrogels that can respond to a number of external stimuli and at the same time show impressive rheological properties are promising materials for a wide range of bioapplications. Here, we present a series of well-defined linear amphiphilic pentablock hybrid polypeptides of the ABCBA type, where A is poly(l-lysine), B is poly(l-histidine)-co-poly(γ-benzyl-l-glutamate), and C is poly(ethylene oxide) (PEO). The polymers were synthesized by the sequential primary amine ring-opening polymerization of N-carboxy anhydrides using bis amine poly(ethylene oxide) (PEO) as a bifunctional macroinitiator, and the length of all of the blocks was varied. The resulting materials formed novel extrudable in situ forming quickly self-healing hydrogels, responsive to the alteration of pH and increase of temperature. The connection between the alteration of the secondary structure of the polypeptides with the viscoelastic behavior was revealed by means of rheology and circular dichroism. Small-angle neutron scattering and scanning electron microscopy were employed to shed light on the structure of the polymers and how it affects their rheological properties. The obtained polymers were subjected to enzymatic degradation tests with trypsin and leucine aminopeptidase. The results suggest that these biomaterials have the potential to be used in a number of bioapplications like drug delivery, 3D printing, and tissue engineering.

One-Pot Synthesis of Oxidation-Sensitive Supramolecular Gels and Vesicles.

Polypeptide-based nanoparticles offer unique advantages from a nanomedicine perspective such as biocompatibility, biodegradability, and stimuli-responsive properties to (patho)physiological conditions. Conventionally, self-assembled polypeptide nanostructures are prepared by first synthesizing their constituent amphiphilic polypeptides followed by postpolymerization self-assembly. Herein, we describe the one-pot synthesis of oxidation-sensitive supramolecular micelles and vesicles. This was achieved by polymerization-induced self-assembly (PISA) of the N-carboxyanhydride (NCA) precursor of methionine using poly(ethylene oxide) as a stabilizing and hydrophilic block in dimethyl sulfoxide (DMSO). By adjusting the hydrophobic block length and concentration, we obtained a range of morphologies from spherical to wormlike micelles, to vesicles. Remarkably, the secondary structure of polypeptides greatly influenced the final morphology of the assemblies. Surprisingly, wormlike micellar morphologies were obtained for a wide range of methionine block lengths and solid contents, with spherical micelles restricted to very short hydrophobic lengths. Wormlike micelles further assembled into oxidation-sensitive, self-standing gels in the reaction pot. Both vesicles and wormlike micelles obtained using this method demonstrated to degrade under controlled oxidant conditions, which would expand their biomedical applications such as in sustained drug release or as cellular scaffolds in tissue engineering.

Superfast and Water‐Insensitive Polymerization on α‐Amino Acid N‐Carboxyanhydrides to Prepare Polypeptides Using Tetraalkylammonium Carboxylate as the Initiator

AbstractWe design the tetraalkylammonium carboxylate‐initiated superfast polymerization on α‐amino acid N‐carboxyanhydrides (NCA) for efficient synthesis of polypeptides. Carboxylates, as a new class of initiator for NCA polymerization, can initiate the superfast NCA polymerization without the need of extra catalysts and the polymerization can be operated in open vessels at ambient condition without the use of glove box. Tetraalkylammonium carboxylate‐initiated polymerization on NCA easily affords block copolymers with at least 15 blocks. Moreover, this method avoids tedious purification steps and enables direct polymerization on crude NCAs in aqueous environments to prepare polypeptides and one‐pot synthesis of polypeptide nanoparticles. These advantages and the mild polymerization condition of tetraalkylammonium carboxylate‐initiated NCA polymerization imply its great potential in functional exploration and application of polypeptides.

Superfast and Water-Insensitive Polymerization on α-Amino Acid N-Carboxyanhydrides to Prepare Polypeptides Using Tetraalkylammonium Carboxylate as the Initiator.

We design the tetraalkylammonium carboxylate-initiated superfast polymerization on α-amino acid N-carboxyanhydrides (NCA) for efficient synthesis of polypeptides. Carboxylates, as a new class of initiator for NCA polymerization, can initiate the superfast NCA polymerization without the need of extra catalysts and the polymerization can be operated in open vessels at ambient condition without the use of glove box. Tetraalkylammonium carboxylate-initiated polymerization on NCA easily affords block copolymers with at least 15 blocks. Moreover, this method avoids tedious purification steps and enables direct polymerization on crude NCAs in aqueous environments to prepare polypeptides and one-pot synthesis of polypeptide nanoparticles. These advantages and the mild polymerization condition of tetraalkylammonium carboxylate-initiated NCA polymerization imply its great potential in functional exploration and application of polypeptides.

N-Heterocyclic Carbene-Catalyzed Random Copolymerization of N-Carboxyanhydrides of α-Amino Acids.

Synthetic polypeptides prepared from N-carboxyanhydrides (NCAs) of α-amino acids are useful for elucidating the relationship between the primary structure of natural peptides and their immunogenicity. In this study, complex copolypeptide sequences were prepared using a recently developed technique; specifically, the random copolymerization of l-alanine NCA with NCAs of l-glutamic acid 5-benzylester (Bn-Glu NCA), S-benzyl-cysteine (Bn-Cys NCA), O-benzyl-l-serine (Bn-Ser NCA), and l-phenylalanine (Phe NCA) was performed using N-heterocyclic carbene (NHC) catalysts. The NHC-initiated Ala NCA/Bn-Glu NCA and Ala NCA/Bn-Cys NCA copolymerization reactions achieved 90% conversion within 30 min. The reactivity ratio values estimated using the Kelen and Tüdos method show that poly(Bn-Glu-co-Ala) and poly(Bn-Cys-co-Ala) have random repeating units with rich alternating sequences, whereas poly(Bn-Ser-co-Ala) and poly(Phe-co-Ala) contain a larger proportion of Ala-repeating units than Bn-Ser and Phe in random placement.

Exploration of a Nitromethane-Carbonylation Strategy during Route Design of an Atropisomeric KRASG12C Inhibitor.

Route design and proof of concept synthesis was conducted on a synthetically challenging atropisomeric KRASG12C inhibitor to support clinical API manufacture. Improvements to the synthesis of a chiral piperazine fragment gave reduced step count and streamlined protecting group strategy via the formation and methanol ring opening of an N-carboxy-anhydride (NCA). The complex atropisomeric nitroquinoline was accessed via an early stage salt-resolution followed by a formal two-part nitromethane-carbonylation, avoiding a high temperature Gould-Jacobs cyclization that previously led to atropisomer racemization. The substrate scope of the formal nitromethane-carbonylation strategy was further explored for a range of ortho-substituted bromo/iodo unprotected anilines.

An Inspection into Multifarious Ways to Synthesize Poly(Amino Acid)s.

Poly(α-amino acid)s (PAAs) attract growing attention due to their essential role in the application as biomaterials. To synthesize PAAs with desired structures and properties, scientists have developed various synthetic techniques with respective advantages. Here, different approaches to preparing PAAs are inspected. Basic features and recent progresses of these methods are summarized, including polymerizations of amino acid N-carboxyanhydrides (NCAs), amino acid N-thiocarboxyanhydrides (NTAs), and N-phenoxycarbonyl amino acids (NPCs), as well as other synthetic routes. NCA is the most classical monomer to prepare PAAs with high molecular weights (MWs). NTA polymerizations are promising alternative pathways to produce PAAs, which can tolerate nucleophiles including alcohols, mercaptans, carboxyl acids, and water. By various techniques including choosing appropriate solvents or using organic acids as promoters, NTAs polymerize to produce polypeptoids and polypeptides with narrow dispersities and designed MWs up to 55.0 and 57.0kg mol-1 , respectively. NPC polymerizations are phosgene-free ways to synthesize polypeptides and polypeptoids. For the future prospects, detail investigations into polymerization mechanisms of NTA and NPC are expected. The synthesis of PAAs with designed topologies and assembly structures is another intriguing topic. The advantages and unsettled problems in various synthetic ways are discussed for readers to choose appropriate approaches for PAAs.

A moisture-tolerant route to unprotected \u03b1/\u03b2-amino acid N-carboxyanhydrides and facile synthesis of hyperbranched polypeptides

A great hurdle in the production of synthetic polypeptides lies in the access of N-carboxyanhydrides (NCA) monomers, which requires dry solvents, Schlenk line/gloveboxe, and protection of side-chain functional groups. Here we report a robust method for preparing unprotected NCA monomers in air and under moisture. The method employs epoxy compounds as ultra-fast scavengers of hydrogen chloride to allow assisted ring-closure and prevent NCA from acid-catalyzed decomposition under moist conditions. The broad scope and functional group tolerance of the method are demonstrated by the facile synthesis of over 30 different α/β-amino acid NCAs, including many otherwise inaccessible compounds with reactive functional groups, at high yield, high purity, and up to decagram scales. The utility of the method and the unprotected NCAs is demonstrated by the facile synthesis of two water-soluble polypeptides that are promising candidates for drug delivery and protein modification. Overall, our strategy holds great potential for facilitating the synthesis of NCA and expanding the industrial application of synthetic polypeptides.

Peptide bond formation using unprotected N-carboxyanhydrides under green chemistry conditions

Peptide bond forming reactions are fundamental to the synthesis of peptides and peptidomimetics. Unfortunately, the chemistry of the peptide bond rouses much concern in terms of economic cost, environmental impact, and production of wastes, especially toxic organic solvents. In a Green Chemistry perspective, we reconsidered the use of unprotected N-carboxy anhydrides (NCAs) of standard α-amino acids under minimal liquid-assisted grinding (LAG) conditions. NCAs are very attractive in peptide synthesis for their simplicity and atom economy. Indeed, the molecular bulk of these N-protected/C-activated bidentate reactants remains with the newly formed peptide. However, the NCAs are prone to polymerization, a formidable obstacle to the development of mechanochemical conditions. Nevertheless, polymerization can be prevented by operating under controlled basic conditions. In this work, we describe peptide bond forming reactions from NCAs and amino partners by LAG in amalgam with nanocrystalline hydroxyapatite (HAp) powder as a bio-compatible, reusable inorganic base. The experiments supported the combination of HAp and the green solvent γ-valerolactone, and highlighted the importance of NCAs’ purity and crystallinity, as studied by NMR, SEM, and XRD. The efficacy of the procedure was assessed by the synthesis of the 13-mer cytotoxic peptide PTP7.

Single-Chain Nanoparticle-Based Coatings with Improved Bactericidal Activity and Antifouling Properties.

Dual-function antibacterial surfaces have exhibited promising potential in addressing implant-associated infections. However, both bactericidal and antifouling properties need to be further improved prior to practical uses. Herein, we report the preparation and properties of a linear block copolymer coating (LP-KF) and a single-chain nanoparticle coating (NP-KF) with poly(ethylene glycol) (PEG) and cationic polypeptide segments. NP-KF with cyclic PEG segments and densely charged polypeptide segments was expected to display improved bactericidal and antifouling properties. LP-KF was prepared by the combination of ring-opening polymerization of N-carboxyanhydride (NCA) monomers and subsequent deprotection. NP-KF was prepared by intramolecular cross-linking of LP-KF in diluted solutions. Both LP-KF- and NP-KF-coated PDMS surfaces were prepared by dipping with polydopamine-coated surfaces. They showed superior in vitro bactericidal activity against both Staphylococcus aureus and Escherichia coli with >99.9% killing efficacy, excellent protein adsorption resistance, antibacterial adhesion, and low cytotoxicity. The NP-KF coating showed higher bactericidal activity and antifouling properties than its linear counterpart. It also showed significant anti-infective property and histocompatibility in vivo, which makes it a good candidate for implants and biomedical device applications.