mW Average Power Research Articles

A 2-inch, large-size deep ultraviolet light-emitting device using dynamically controlled micro-plasma-excited AlGaN

A dynamically controlled micro-plasma-excited (MIPE) aluminum gallium nitride deep ultraviolet (DUV) light-emitting device is demonstrated. This device provides high-power DUV emission at any desired wavelength and allows enlargement of emission areas like plasma display panels for easy, low-cost fabrication. Neither p-n junctions nor electrode contacts are required for device fabrication. We fabricated 2-in. diameter wafer-size MIPE emitters of DUV light at specific wavelengths from AlGaN quantum wells with 50 mW average output power. We can also fabricate 6-in. diameter DUV emitters using sapphire wafers and 1 m × 5 m panel-type DUV emitters.

An Electromagnetic Micro Power Generator Based on Mechanical Frequency Up-Conversion

This paper presents a novel inertial electromagnetic micro power generator. The proposed generator utilizes mechanical frequency up-conversion technique to improve the level of power generated in low environmental frequencies in order to make device more efficient. Power transduction is done by means of electromagnetic induction. The generator's structure consists of two main parts; first part contains of a planar spring with two magnets and a mechanical barrier placed between magnets to up-convert external frequency, and second part is made from four cantilever beams with copper coil deposited on them. The simulation results show 67.4mV and 46.6µW RMS voltage and average power respectively from a single beam by up-converting 75Hz external frequency to 5.9kHz. The total power density gained from four beams is 145.6µW/cm 3 with device internal volume of 0.64cm 3 . 

A 320 mW 342 GOPS Real-Time Dynamic Object Recognition Processor for HD 720p Video Streams

A heterogeneous multi-core processor is proposed to achieve real-time dynamic object recognition on HD 720p video streams. The context-aware visual attention model is proposed to reduce the required computing power for HD object recognition based on enhanced attention accuracy. In order to realize real-time execution of the proposed algorithm, the processor adopts a 5-stage task-level pipeline that maximizes the utilization of its 31 heterogeneous cores, comprising four simultaneous multithreading feature extraction clusters, a cache-based feature matching processor and a machine learning engine. Dynamic resource management is applied to adaptively tune thread allocation and power management during execution based on the detected amount of tasks and hardware utilization to increase energy efficiency. As a result, the 32 mm2 chip, fabricated in 0.13 μm CMOS technology, achieves 30 frame/sec with 342 8-bit GOPS peak performance and 320 mW average power dissipation, which are a 2.72 times performance improvement and 2.54 times per-pixel energy reduction compared to the previous state-of-the-art.

Femtosecond SESAM-modelocked Cr:ZnS laser

We report self-starting femtosecond operation of a 180-MHz SESAM-controlled prismless Cr:ZnS laser around 2400 nm at open air and room temperature. Dispersion compensation was achieved by a combination of bulk materials and chirped mirrors. Both soliton- and chirped-pulse operation regimes have been demonstrated with 130 fs (630 fs) pulse duration at 130 (205) mW average output power, respectively. The output power was about 30% higher than for a comparable Cr:ZnSe sample in the same cavity.

Low repetition rate SESAM modelocked VECSEL using an extendable active multipass-cavity approach

Ultrafast VECSELs are compact pulsed laser sources with more flexibility in the emission wavelength compared to diode-pumped solid-state lasers. Typically, the reduction of the pulse repetition rate is a straightforward method to increase both pulse energy and peak power. However, the relatively short carrier lifetime of semiconductor gain materials of a few nanoseconds sets a lower limit to the repetition rate of passively modelocked VECSELs. This fast gain recovery combined with low pulse repetition rates leads to the buildup of multiple pulses in the cavity. Therefore, we applied an active multipass approach with which demonstrate fundamental modelocking at a repetition rate of 253 MHz with 400 mW average output power in 11.3 ps pulses.

75 MW few-cycle mid-infrared pulses from a collinear apodized APPLN-based OPCPA

We present an ultra-broadband optical parametric chirped-pulse amplification (OPCPA) system operating at 3.4 µm center wavelength with a peak power of 75 MW. The OPCPA system is split into a pre- and a power-amplifier stage. Both stages are based on apodized aperiodically poled MgO:LiNbO3 (APPLN). The collinear mixing configuration allows us to manipulate the spectral phase of the output mid-infrared pulses by sending the near-infrared seed pulses through a pulse shaper. The system delivers clean 75-fs pulses with record-high 700 mW average power, corresponding to 7 µJ of pulse energy at a repetition rate of 100 kHz.

Difference frequency generation of femtosecond mid infrared pulses employing intense Stokes pulses excitation in a photonic crystal fiber

We demonstrate a novel method of generating milli-watt level mid-IR (MIR) pulses based on difference frequency mixing of the output from a 40 MHz Yb fiber Chirped Pulse Amplifier (CPA) and the intense Stokes pulses generated in a photonic crystal fiber (PCF) with two closely spaced zero dispersion wavelengths (ZDW). By taking advantage of the unique dispersion profile of the fiber, high power narrowband Stokes pulses are selectively generated in the normal dispersion region of the PCF with up to 1.45 nJ of pulse energy. Mixing with 12 nJ of pump pulses at 1035 nm in a type-II AgGaS(2) crystal yields MIR pulses around 5.5 µm wavelength with up to 3 mW of average power and 75 pJ of pulse energy. The reported method can be extended to generation of other MIR wavelengths by selecting PCFs with different second ZDWs or engineering the fiber dispersion profile via longitudinal tapering.

Gain characterization and passive modelocking of electrically pumped VECSELs

Linear and nonlinear gain characterization of electrically pumped vertical external cavity surface emitting lasers (EP-VECSELs) is presented with spectrally resolved measurements of the gain and with gain saturation measurements of two EP-VECSEL samples with different field enhancement in the quantum-well gain layers. The spectral bandwidth, small-signal gain and saturation fluence of the devices are compared. Using the sample with the larger bandwidth, we have demonstrated the shortest pulses generated from a passively modelocked EP-VECSEL to date. With a low-saturation-fluence SESAM for passive modelocking we have achieved 9.5-ps pulses with 7.6 mW average output power at a repetition rate of 1.4 GHz. With a higher output coupler transmission the pulse duration was increased to 31 ps with an average output power of 13.6 mW. The pulses were chirped mainly due to the group delay dispersion (GDD) introduced by the intermediate DBR, which compensates the optical loss in the structure.

Performance of 2 μm Tm:YAP pulse laser based on a carbon nanotube absorber

We demonstrated the first use of carbon nanotube as a saturable absorber in the Q-switched and Q-switched mode-locking of a diode pumped Tm:YAP operating at 2 μm. At the incident pump power of 8.64 W, the minimum Q-switched pulse width of 255.1 ns, and the maximum peak power 53.1 W can be obtained with the corresponding repetition rate of 21.76 kHz. The performance of a diode-pumped passively Q-switched mode-locked Tm:YAP laser with high repetition rate formed with a folded cavity. As high as 780 mW average output power was produced in QML laser. The repetition rate of the mode-locked pulse inside the Q-switched envelope was 244.1 MHz. The dependence of the operational parameters on the pump power was also investigated experimentally.

All-fiber passively mode-locked thulium/holmium laser with two center wavelengths

We have demonstrated a self-starting, passively mode-locked Tm/Ho codoped fiber laser that lases at one of two center wavelengths. An amplified 1.56 μm distributed feedback laser pumps a ring laser cavity which contains 1 m of Tm/Ho codoped silica fiber. Mode locking is obtained via nonlinear polarization rotation using a c-band polarization sensitive isolator with two polarization controllers. The laser is able to pulse separately at either 1.97 or 2.04 μm by altering the intracavity polarization during the initiation of mode locking. The codoped fiber permits pulsing at one of two wavelengths, where the shorter is due to the Tm(3+) emission and the longer due to the Ho(3+) emission. The laser produces a stable pulse train at 28.4 MHz with 25 mW average power, and a pulse duration of 966 fs with 9 nm bandwidth.

1550 nm ErAs:In(Al)GaAs large area photoconductive emitters

We report on high power terahertz (THz) emission from ErAs-enhanced In0.52Al0.48As-In0.53Ga0.47As superlattices for operation at 1550 nm. ErAs clusters act as efficient recombination centers. The optical power is distributed among a large, microstructured area in order to reduce the local optical intensity. A THz field strength of 0.7 V/cm (1 V/cm peak-to-peak) at 100 mW average optical power has been obtained, with emission up to about 4 THz in air, limited by the detection crystal used in the system.

3 GHz, fundamentally mode-locked, femtosecond Yb-fiber laser

We demonstrate a fundamentally mode-locked Yb-fiber laser with 3 GHz repetition rate and ∼206 fs pulse duration. The laser incorporates two enabling technologies: a 1 cm heavily Yb-doped phosphate glass fiber as the gain medium and a high-dispersion (-1300 fs2) output coupler to manage cavity dispersion. The oscillator self-starts and generates up to 53 mW average power.

Widely tunable midinfrared difference frequency generation in orientation-patterned GaAs pumped with a femtosecond Tm-fiber system

We demonstrate a midinfrared source tunable from 6.7 to 12.7 μm via difference frequency generation (DFG) in orientation-patterned GaAs, with 1.3 mW average output power. The input pulses are generated via Raman self-frequency shift of a femtosecond Tm-doped-fiber laser system in a fluoride fiber. We numerically model the DFG process and show good agreement between simulations and experiments. We use this numerical model to show an improved design using longer pump pulses.

Fabrication and characterization of a low frequency electromagnetic energy harvester

This paper presents the fabrication and characterization of an AA size electromagnetic energy transducer based on vibration. A magnetic spring technique is used to scavenge energy from low frequency external vibration. The output of the harvester is maximized by optimizing the mass of moving and fixed magnets, coil width, coil position and load resistance through a comprehensive experimental analysis. The prototype can generate an open circuit voltage of 3.961 V and 1.18 mW average power at a load resistance of 97 Ω with 9 Hz resonance frequency and 0.5 mm displacement.

Design and Analysis of a Vibration-driven AA Size Electromagnetic Energy Harvester Using Magnetic Spring

This paper describes the design, simulation and characterization of an AA size electromagnetic energy harvester that is capable of converting environmental vibration into electrical energy. A magnetic spring technique is used to scavenge energy from low frequency external vibrations. The generator is characterized by ANSYS 2D finite element analysis, and optimized in terms of moving mass, fixed magnet size, coil width and load resistance. The optimized energy harvester is able to generate 53.5 mW of average power at 8.1 Hz resonance frequency, with a displacement of 0.5 mm.

CW and mode-locked operation of Yb^3+-doped Lu_3Al_5O_12 ceramic laser

CW laser operation and first mode-locked laser operation of Yb:LuAG ceramic are reported. Efficient CW laser operation was obtained with maximum output power of 2.14 W and a 72% slope efficiency. Femtosecond mode-locked laser operation was achieved with pulse duration of 699 fs and a 200 mW average output power.

Efficient graphene Q switching and mode locking of 134 μm neodymium lasers

We demonstrate that few-layered graphene sheets used as a saturable absorber can provide efficient Q-switching and mode-locking modulation in 1.34 μm Nd:GdVO(4) bulk lasers. The minimum Q-switched pulses were 450 ns for 260 mW average power, 43 kHz repetition rate, and 2.5 μJ pulse energy. For the mode-locked laser, an average power of 1.29 W was achieved with 11 ps pulse duration and 13 nJ pulse energy. To our knowledge, this average power is the highest yet obtained from a graphene mode-locked laser, and the corresponding optical-optical efficiency of 23% is the best result among 1.3 μm neodymium mode-locked lasers. The quality factor M(2) of the Q-switched beam was 1.4 and 1.6 in the horizontal and longitudinal planes, respectively, and the M(2) of the mode-locked beam reached 1.1 and 1.0. These results clearly indicate the advantages of few-layered graphene as a saturable absorber.

Hybrid mode-locked Er-doped fiber femtosecond oscillator with 156 mW output power

We report on an Er-doped fiber oscillator that produces 146 fs pulses with 156 mW average power at a repetition rate of 49.9 MHz. The pulse energy reaches 3.13 nJ, surpassing the conventional power limit in the dispersion-managed soliton regime. Such high pulse power is obtained by devising a hybrid mode-locking scheme that combines saturable absorption with nonlinear polarization evolution. The oscillator also offers excellent temporal purity in the generated pulses with high power, providing a robust fiber-based frequency comb well suited for industrial uses.

Direct diode-pumped Kerr-lens mode-locked Ti:sapphire laser

We describe a Ti:sapphire laser pumped directly with a pair of 1.2W 445nm laser diodes. With over 30mW average power at 800 nm and a measured pulsewidth of 15fs, Kerr-lens-modelocked pulses are available with dramatically decreased pump cost. We propose a simple model to explain the observed highly stable Kerr-lens modelocking in spite of the fact that both the mode-locked and continuous-wave modes are smaller than the pump mode in the crystal.

Degradation of optical properties of a film-type single-wall carbon nanotubes saturable absorber (SWNT-SA) with an Er-doped all-fiber laser

Single-wall carbon nanotubes (SWNTs) are promising materials for saturable absorbers (SAs) in mode-locked lasers. However it has been widely recognized that the degradation of optical properties of film-type SWNTs used in femtosecond mode-locked lasers limits the achievable long-term stability of such lasers. In this paper, we study the degradation of optical properties of SWNT-SA fabricated as sandwich type using HiPCO SWNTs with an Er-doped all-fiber laser. The thresholds of laser pump power are examined to avoid the damage of the SWNT-SA. Based on the proposed analysis, it is shown that all-fiber laser pulses of 300 fs pulse width, 3.85 mW average output power, 211.7 MW/cm² peak intensity and 69.9 MHz repetition rate can be reliably generated without any significant damage to the SWNT-SA film.