Murine Fibroblast Cell Research Articles

Drug-eluting biodegradable metals and metal-ceramic composites

Biodegradable metals emerged as promising temporary bone implants. The integration of local drug delivery (LDD) can prevent biomaterial-centered infections that are difficult to treat. LDD is achieved by drug-eluting coatings or porous implants where the drug is impregnated after implant fabrication because the high temperatures used during conventional production processes would result in their thermal decomposition. This work reports on the production and characterization of vancomycin hydrochloride (VH)-loaded Fe and Fe-iron oxide (Fe2O3) composites (Fe-Fe2O3) by a cold sintering technique. We use focused ion beam milling for the first time to investigate the drug-metal interface. We investigate the mechanical and degradation properties of VH-free and VH-loaded Fe and Fe-Fe2O3. Results show very high mechanical strength of drug-eluting Fe and Fe-Fe2O3 composites (up to than 780 MPa under compression, exceeding the maximum strength of cancellous bone more than three times) accompanied by a delayed drug release. Then, we confirm the good antimicrobial activity against Staphylococcus aureus and cell compatibility with the murine embryonic fibroblast cell line NIH/3T3 in vitro. Overall results confirm the promise of drug-eluting metals and metal-ceramic composites for LDD in bone.

Purification and Biological Properties of Raniseptins-3 and -6, Two Antimicrobial Peptides from Boana raniceps (Cope, 1862) Skin Secretion.

The number of multidrug-resistant pathogenic microorganisms has been growing in recent years, most of which is due to the inappropriate use of the commercial antibiotics that are currently available. The dissemination of antimicrobial resistance represents a serious global public health problem. Thus, it is necessary to search for and develop new drugs that can act as antimicrobial agents. Antimicrobial peptides are a promising alternative for the development of new therapeutic drugs. Anurans' skin glands are a rich source of broad-spectrum antimicrobial compounds and hylids, a large and diverse family of tree frogs, are known as an important source of antimicrobial peptides. In the present study, two novel antimicrobial peptides, named Raniseptins-3 and -6, were isolated from Boana raniceps skin secretion and their structural and biological properties were evaluated. Raniseptins-3 and -6 are cationic, rich in hydrophobic residues, and adopt an α-helix conformation in the presence of SDS (35 mM). Both peptides are active against Gram-negative bacteria and Gram-positive pathogens, with low hemolytic activity at therapeutic concentrations. No activity was observed for yeasts, but the peptides are highly cytotoxic against B16F10 murine melanoma cells and NIH3T3 mouse fibroblast cells. None of the tested compounds showed improvement trends in the MTT and LDH parameters of MHV-3 infected cells at the concentrations tested.

Titanium Dioxide Nanoparticle (TiO2 NP) Induces Toxic Effects on LA-9 Mouse Fibroblast Cell Line.

Titanium dioxide nanoparticles (TiO2 NPs) are extensively applied in the industry due to their photocatalytic potential, low cost, and considerably low toxicity. However, new unrelated physicochemical properties and the wide use of nanoparticles brought concern about their toxic effects. Thereby, we evaluated the cytotoxicity of a TiO2 NP composed of anatase and functionalized with sodium carboxylate ligands in a murine fibroblast cell line (LA-9). Scanning Electron Microscopy (SEM), Dynamic Light Scattering (DLS), and ATR-FTIR spectroscopy were applied to determine nanoparticle physicochemical properties. The cell viability (MTT assay) and clonogenic survival were analyzed in fibroblasts exposed to TiO2 NP (50, 150, and 250 µg/mL) after 24h. Moreover, oxidative stress, proinflammatory state, and apoptosis were evaluated after 24h. TiO2 NP characterization showed an increased hydrodynamic size (3.57 to 7.62 nm) due to solvent composition and a heterogeneity dispersion in water and cell culture media. Also, we observed a zeta potential increased from -20 to -11 mV in function of protein adsorption. TiO2 NP reduced fibroblast cell viability and induced ROS production at the highest concentrations (150 and 250 µg/mL). Moreover, TiO2 NP reduced the fibroblasts clonogenic survival at the highest concentration (250 µg/mL) on the 7th day after the 24h exposure. Nevertheless, TiO2 NP did not affect the fibroblast proinflammatory cytokines (IL-6 and TNF) secretion at any condition. Early and late apoptotic fibroblast cells were detected only at 150 µg/mL TiO2 NP after 24h. Probably, TiO2 NP photocatalytic activity unbalanced ROS production which induced apoptosis and consequently reduced cell viability and metabolic activity at higher concentrations.

Enhancing the properties of industrial waste nanocellulose bioaerogels using turmeric nano particles

In the present investigation, modified approach to enhance the properties of corrugated paper wastes nanocellulose (NC). The isolated NC was used with seafood wastes chitosan (CS) in the preparation of nano turmeric-loaded bioaerogel scaffolds. The results showed that the isolated NC had fibers length and diameters of 81 ± 12 nm and 7 ± 1.9 nm, respectively and crystallinity index of 77.9%, which indicates a maximum removal of impurity from the NC. CS had 64.3% crystallinity index with observable nonporous structures. Pure NC aerogel had the highest porosity, surface area and water absorption, but it showed very weak mechanical properties. Nano turmeric loaded bioaerogels showed enhanced mechanical properties and reduced water absorption capacity. Loaded bioaerogels exhibited higher antibacterial activity against S. aureus than E. coli with an inhibition zone of 32 mm and 27 mm respectively. Biocompatibility assay was conducted on murine fibroblast cells; the addition of nano turmeric significantly enhanced the proliferation of the cells compared with the control. These findings confirm the possibility and potential of smart conversion of wastes materials into advanced functional materials. Such bioaerogels can be of great interest in several biomedical applications such as wound healing, drug delivery and tissue scaffolding.

Accelular nanofibrous bilayer scaffold intrapenetrated with polydopamine network and implemented into a full-thickness wound of a white-pig model affects inflammation and healing process

Treatment of complete loss of skin thickness requires expensive cellular materials and limited skin grafts used as temporary coverage. This paper presents an acellular bilayer scaffold modified with polydopamine (PDA), which is designed to mimic a missing dermis and a basement membrane (BM). The alternate dermis is made from freeze-dried collagen and chitosan (Coll/Chit) or collagen and a calcium salt of oxidized cellulose (Coll/CaOC). Alternate BM is made from electrospun gelatin (Gel), polycaprolactone (PCL), and CaOC. Morphological and mechanical analyzes have shown that PDA significantly improved the elasticity and strength of collagen microfibrils, which favorably affected swelling capacity and porosity. PDA significantly supported and maintained metabolic activity, proliferation, and viability of the murine fibroblast cell lines. The in vivo experiment carried out in a domestic Large white pig model resulted in the expression of pro-inflammatory cytokines in the first 1–2 weeks, giving the idea that PDA and/or CaOC trigger the early stages of inflammation. Otherwise, in later stages, PDA caused a reduction in inflammation with the expression of the anti-inflammatory molecule IL10 and the transforming growth factor β (TGFβ1), which could support the formation of fibroblasts. Similarities in treatment with native porcine skin suggested that the bilayer can be used as an implant for full-thickness skin wounds and thus eliminate the use of skin grafts.

A Novel Mix of Polyphenols and Micronutrients Reduces Adipogenesis and Promotes White Adipose Tissue Browning via UCP1 Expression and AMPK Activation

Background: Obesity is a pandemic disease characterized by excessive severe body comorbidities. Reduction in fat accumulation represents a mechanism of prevention, and the replacement of white adipose tissue (WAT) with brown adipose tissue (BAT) has been proposed as one promising strategy against obesity. In the present study, we sought to investigate the ability of a natural mixture of polyphenols and micronutrients (A5+) to counteract white adipogenesis by promoting WAT browning. Methods: For this study, we employed a murine 3T3-L1 fibroblast cell line treated with A5+, or DMSO as control, during the differentiation in mature adipocytes for 10 days. Cell cycle analysis was performed using propidium iodide staining and cytofluorimetric analysis. Intracellular lipid contents were detected by Oil Red O staining. Inflammation Array, along with qRT-PCR and Western Blot analyses, served to measure the expression of the analyzed markers, such as pro-inflammatory cytokines. Results: A5+ administration significantly reduced lipids' accumulation in adipocytes when compared to control cells (p < 0.005). Similarly, A5+ inhibited cellular proliferation during the mitotic clonal expansion (MCE), the most relevant stage in adipocytes differentiation (p < 0.0001). We also found that A5+ significantly reduced the release of pro-inflammatory cytokines, such as IL-6 and Leptin (p < 0.005), and promoted fat browning and fatty acid oxidation through increasing expression levels of genes related to BAT, such as UCP1 (p < 0.05). This thermogenic process is mediated via AMPK-ATGL pathway activation. Conclusion: Overall, these results demonstrated that the synergistic effect of compounds contained in A5+ may be able to counteract adipogenesis and then obesity by inducing fat browning.

3D-Printing of Capsule Devices as Compartmentalization Tools for Supported Reagents in the Search of Antiproliferative Isatins.

The application of high throughput synthesis methodologies in the generation of active pharmaceutical ingredients (APIs) currently requires the use of automated and easily scalable systems, easy dispensing of supported reagents in solution phase organic synthesis (SPOS), and elimination of purification and extraction steps. The recyclability and recoverability of supported reagents and/or catalysts in a rapid and individualized manner is a challenge in the pharmaceutical industry. This objective can be achieved through a suitable compartmentalization of these pulverulent reagents in suitable devices for it. This work deals with the use of customized polypropylene permeable-capsule devices manufactured by 3D printing, using the fused deposition modeling (FDM) technique, adaptable to any type of flask or reactor. The capsules fabricated in this work were easily loaded "in one step" with polymeric reagents for use as scavengers of isocyanides in the work-up process of Ugi multicomponent reactions or as compartmentalized and reusable catalysts in copper-catalyzed cycloadditions (CuAAC) or Heck palladium catalyzed cross-coupling reactions (PCCCRs). The reaction products are different series of diversely substituted isatins, which were tested in cancerous cervical HeLa and murine 3T3 Balb fibroblast cells, obtaining potent antiproliferative activity. This work demonstrates the applicability of 3D printing in chemical processes to obtain anticancer APIs.

CRISPR/Cas9-mediated targeted knock-in of large constructs using nocodazole and RNase HII

On-target integration of large cassettes via homology-directed repair (HDR) has several applications. However, the HDR-mediated targeted knock-in suffered from low efficiency. In this study, we made several large plasmids (12.1–13.4 kb) which included the CRISPR/Cas9 system along with a puromycin transgene as part of the large DNA donor (5.3–7.1 kb insertion cassettes) and used them to evaluate their targeted integration efficiency into a transgenic murine embryonic fibroblast (MEF) cell line carrying a single copy of a Venus transgene. We established a detection assay by which HDR events could be discriminated from the error-prone non-homologous end-joining (NHEJ) events. Improving the plasmid quality could considerably leverage the cell toxicity impediment of large plasmids. The use of the TILD (targeted integration with linearized dsDNA) cassettes did not improve the HDR rate compared to the circular plasmids. However, the direct inclusion of nocodazole into the electroporation solution significantly improved the HDR rate. Also, simultaneous delivery of RNase HII and the donor plasmids into the electroporated cells considerably improved the HDR events. In conclusion, the results of this study showed that using cell synchronization reagents in the electroporation medium can efficiently induce HDR rate in the mammalian genome.

Fabrication of a Polycaprolactone/Chitosan Nanofibrous Scaffold Loaded with Nigella sativa Extract for Biomedical Applications

In this study, biocompatible electrospun nanofiber scaffolds were produced using poly(-caprolactone (PCL)/chitosan (CS) and Nigella sativa (NS) seed extract, and their potential for biomedical applications was investigated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), total porosity measurements, and water contact angle measurements were used to evaluate the electrospun nanofibrous mats. Additionally, the antibacterial activities of Escherichia coli and Staphylococcus aureus were investigated, as well as cell cytotoxicity and antioxidant activity, using MTT and DPPH assays, respectively. The obtained PCL/CS/NS nanofiber mat was observed by SEM to have a homogeneous and bead-free morphology, with average diameters of 81.19 ± 4.38 nm. Contact angle measurements showed that the wettability of the electrospun PCL/Cs fiber mats decreased with the incorporation of NS when compared to the PCL/CS nanofiber mats. Efficient antibacterial activity against S. aureus and E. coli was displayed, and an in vitro cytotoxic assay demonstrated that the normal murine fibroblast cell line (L929 cells) remained viable after 24, 48, and 72 h following direct contact with the produced electrospun fiber mats. The results suggest that the PCL/CS/NS hydrophilic structure and the densely interconnected porous design are biocompatible materials, with the potential to treat and prevent microbial wound infections.

Design, synthesis and cytotoxic evaluation of a selective serotonin reuptake inhibitor (SSRI) by virtual screening

Depression is one of the most common mental illnesses, affecting almost 300 million people. According to the WHO, depression is one of the world's leading causes of disability and morbidity. People with this illness require both psychological and pharmaceutical treatment because severe depressive episodes often result in suicide. Selective serotonin reuptake inhibitors (SSRI) are widely used antidepressants that target the human serotonin transporter (hSERT). The crystallization of hSERT and the experimental data available allows cost and time-efficient computational tools like virtual screening (VS) to be utilized in the development of therapeutic agents. Here, we synthesized, characterized, and evaluated the biological activity of a novel SSRI analog of paroxetine, rationally designed by applying an artificial neural network-based QSAR model and a molecular docking analysis on hSERT. The analog N-substituted 18a showed higher affinity for the transporter (-10.2 kcal/mol), lower Ki value (1.19 nM) and a safer toxicological profile than paroxetine and was synthesized with a 71% yield. The in vitro cytotoxicity of the analog was evaluated using human glioblastoma (U87 MG), human neuroblastoma (SH SY5Y) and murine fibroblast (L929) cell lines. Also, the hemolytic ability of the compound was assessed on human erythrocytes. Results showed that analog 18a did not exhibit cytotoxic activity on the cell lines used and has no hemolytic activity at any of the concentrations tested, whereas with paroxetine, hemolysis was observed at 2.3, 1.29 y 0.67 mM. Based on these results, it is possible to suggest that analog 18a could be a promising new SSRI candidate for the treatment of this illness.

The use of human-derived feeder layers for the cultivation of transplantable human epidermal cell sheet to repair second degree burn wounds.

Human epidermal cell sheet (human-ECS) is a feasible treatment option for wound injury. Traditionally, researchers often use murine 3T3 fibroblast cells as feeder layer to support human epidermal cell sheet grafts, thus increase risk to deliver animal-borne infection. To overcome the potential risks involved with xenotransplantation, we develop human foreskin fibroblast cell as feeder layer culture system and investigate the effects of human-ECS on second-degree burn wound healing in mini-pig in order to develop more effective and safer therapies to enhance wound healing in human. Human epidermal keratinocytes and fibroblasts were isolated from foreskin tissue and were co-cultured to manufacture human-ECS. The cell morphology was monitored with phase-contrast microscopy, the stem cell markers were assessed by flow cytometry, and by colony-forming efficiency (CFE) assay. The structure of human-ECS was observed by hematoxylin and eosin staining. Expression of cytokines in human-ECS was confirmed by enzyme-linked immunosorbent assay. Second-degree burn wounds were created on the dorsal of miniature pig to evaluate the effect of oil gauze, oil gauze combined with commercial epidermal growth factor (EGF) cream, and oil gauze combined with human-ECS. Wound healing rate, histological examination, and Masson staining were measured to observe the wound repair efficacy. Real-time PCR and Western blot were utilized to detect the expression level of EGF and interleukin 6 (IL-6). Stratified human-ECS with 6-7 layers of epidermal cells was successfully cultivated with human-derived feeder cells, in which epidermal cell highly expressed CD49f and CFE was 3%±0.45%. Application of human-ECS induced a higher wound healing rate than commerical EGF cream and oil gauze control. The expression of EGF in human-ECS group was higher than those in the other groups; however, the expression of IL-6 was significantly decreased at day14 by human-ECS treatment group. Human-derived feeder cells are suitable for cultivation of human-ECS, avoiding pathogen transmission. Human-ECS could enhance second-degree burn wound healing, and its promoting effect involved secreting a variety of cytokines to regulate tissue reparative process.

Incorporation of sodium alginate functionalized halloysite nanofillers into poly (vinyl alcohol) to study mechanical, cyto/heme compatibility and wound healing application

In this study, the Halloysite nanotubes (HNTs) are surface-functionalized with sodium alginate (Sod.alg) and poly (vinyl alcohol) (PVA) were employed to generate nanocomposite films (Sod.alg-rHNT/PVA). These nanocomposite films were made via the solution casting technique. FE-SEM data verified sod.alg-rHNT dispersion into the PVA matrix. The modifications were confirmed from FTIR, TGA and PXRD techniques. In the mechanical studies of synthesized nanocomposite films, the films showed a considerable increase in the tensile strength and Young's modulus values. The nanocomposite film's ability to induce cell proliferation and migration was investigated using murine fibroblast (NIH3T3) cells. The films increased cellular proliferation (128 ± 1.07 %) compared to the neat PVA. Cell adhesion tests showed cytocompliant films. In the scratch assay, the 5 wt% film elicited wound closure at a faster rate (91.53 ± 1.04 %). Films were compatible with human blood cells. Therefore the prepared nanocomposite films can be used as promising wound healers after pre-clinical and clinical testing.

Preclinical safety assessment of photoluminescent metal quantum clusters stabilized with autologous serum proteins for host specific theranostics.

Host derived serum proteome stabilised red-emitting gold quantum clusters (or Au-QC-NanoSera or QCNS) of size range ~2 nm have been synthesised in a first reported study. The host serum was taken from bovine, murine and human origins to establish the proof of concept. In-vitro biocompatibility with normal murine L929 fibroblast cells and radiosensitisation ability against PLC/PRF/5 hepatoma cells was established. A concentration dependant radiosensitisation effect of QCNS at differential γ-radiation doses was observed with almost 90% killing of cancer cells at a radiation dose of 5Gy. Acute and subacute safety, and non-immunogenicity of autologously derived QCNS was established in in-bred C57BL/6 mice. The biodistribution analysis revealed that the QCNS were effectively cleared from the body over a course of 28 days and were found to pose no major threat to the proper functioning and morphology of the mice.

PS-B07-4: ADMINISTRATION OF AMINO ACIDS PROVOKES EXPRESSION OF PRO-FIBROTIC GENES IN MURINE CULTURED FIBROBLAST CELLS

Objective: Diabetic kidney disease (DKD) has been the most common cause of end-stage renal disease (ESRD) which leads to hemodialysis for more than 20 years in Japan. Various reports have been published on the mechanisms underlying the progression of DKD, however, many details remain unclear. We investigated the mechanisms underlying the progression of renal fibrosis and kidney injury in hyperglycemia from the viewpoint of metabolic alteration in the kidney by using streptozotocin-treated mice (STZ mice). Design/Methods: 8 weeks old ICR mice were treated with streptozotocin (200 mg/kg intra-peritoneally), to produce type 1 diabetes mellitus model mice. The kidneys of those mice were collected 4 weeks after STZ treatment and examined for metabolites that were altered in the kidneys of STZ mice by metabolome analysis. Amino acids that were increasing in the kidneys of STZ mice were administered to L929 murine fibroblast cells, and expression of pro-fibrotic genes were examined. Results: STZ-treatment caused progression of renal fibrosis in mice under both low- and high-protein diets. Metabolome analysis of the kidneys in STZ mice showed marked alterations of amino acids in the kidneys. Increased levels of branched chain amino acids (BCAAs) such as valine and leucine were observed. Among these amino acids, leucine administration to L929 cells resulted in increased expression of genes promoting renal fibrosis. Conclusions: Alterations of BCAAs in the kidneys due to hyperglycemia in STZ mice may affect progression of renal fibrosis and kidney injury. We are now investigating the mechanism by which BCAAs contribute to renal fibrosis.

Ferrocene modified analogues of imatinib and nilotinib as potent anti-cancer agents.

The unique features of ferrocene and the need for development of targeted anticancer drugs inspired the design, synthesis and biological evaluation of ferrocenyl modified tyrosine kinase inhibitors by replacing the pyridyl moiety in imatinib and nilotinib generalized structures with a ferrocenyl group. A series of seven new ferrocene analogues were synthesized and evaluated for their anticancer activity in a panel of bcr-abl positive human malignant cell lines using imatinib as a reference drug. The metallocenes exhibited a dose-dependent inhibition on malignant cell growth with varying antileukemic activity. The most potent analogues were compounds 9 and 15a showing comparable or even superior efficacy to the reference. Their cancer selectivity indices suggest a favorable selectivity profile, indicating a 250 times higher preferential activity of 15a towards malignantly transformed K-562 cells and an even twice greater one (500) of 9 in the LAMA-84 leukemic model as compared to the normal murine fibroblast cell line.

Diminished schwann cell repair responses play a role in delayed diabetes-associated wound healing.

Diabetes mellitus is the most common metabolic disease associated with impaired wound healing. Recently, Schwann cells (SCs), the glia of the peripheral nervous system, have been suggested to accelerate normal skin wound healing. However, the roles of SCs in diabetic wound healing are not fully understood. In this study, Full-thickness wounds were made in the dorsal skin of C57/B6 mice and db/db (diabetic) mice. Tissue samples were collected at different time points, and immunohistochemical and immunofluorescence analyses were performed to detect markers of de-differentiated SCs, including myelin basic protein, Sox 10, p75, c-Jun, and Ki67. In addition, in vitro experiments were performed using rat SC (RSC96) and murine fibroblast (L929) cell lines to examine the effects of high glucose conditions (50mM) on the de-differentiation of SCs and the paracrine effects of SCs on myofibroblast formation. Here, we found that, compared with that in normal mice, wound healing was delayed and SCs failed to rapidly activate a repair program after skin wound injury in diabetic mice. Furthermore, we found that SCs from diabetic mice displayed functional impairments in cell de-differentiation, cell-cycle re-entry, and cell migration. In vitro, hyperglycemia impaired RSC 96 cell de-differentiation, cell-cycle re-entry, and cell migration, as well as their paracrine effects on myofibroblast formation, including the secretion of TGF-β and Timp1. These results suggest that delayed wound healing in diabetes is due in part to a diminished SC repair response and attenuated paracrine effects on myofibroblast formation.

Nanohydroxyapatite/Titanate Nanotube Composites for Bone Tissue Regeneration.

Strategies for the production of new nanocomposites that promote bone tissue regeneration are important, particularly those that enhance the osteoinduction of hydroxyapatite in situ. Here, we studied and report the synthesis of nanohydroxyapatite and titanate nanotube (nHAp/TiNT) composites formulated at different concentrations (1, 2, 3, and 10 wt % TiNT) by means of a wet aqueous chemical reaction. The addition of TiNT affects the morphology of the nanocomposites, decreasing the average crystallite size from 54 nm (nHAp) to 34 nm (nHAp/TiNT10%), while confirming its interaction with the nanocomposite. The crystallinity index (CI) calculated by Raman spectroscopy and XRD showed that the values decreased according to the increase in TiNT concentration, which confirmed their addition to the structure of the nanocomposite. SEM images showed the presence of TiNTs in the nanocomposite. We further verified the potential cytotoxicity of murine fibroblast cell line L929, revealing that there was no remarkable cell death at any of the concentrations tested. In vivo regenerative activity was performed using oophorectomized animal (rat) models organized into seven groups containing five animals each over two experimental periods (15 and 30 days), with bone regeneration occurring in all groups tested within 30 days; however, the nHAp/TiNT10% group showed statistically greater tissue repair, compared to the untreated control group. Thus, the results of this study demonstrate that the presently formulated nHAp/TiNT nanocomposites are promising for numerous improved bone tissue regeneration applications.

Melt electrowriting of PLA, PCL, and composite PLA/PCL scaffolds for tissue engineering application

Fabrication of well-ordered and bio-mimetic scaffolds is one of the most important research lines in tissue engineering. Different techniques have been utilized to achieve this goal, however, each method has its own disadvantages. Recently, melt electrowriting (MEW) as a technique for fabrication of well-organized scaffolds has attracted the researchers’ attention due to simultaneous use of principles of additive manufacturing and electrohydrodynamic phenomena. In previous research studies, polycaprolactone (PCL) has been mostly used in MEW process. PCL is a biocompatible polymer with characteristics that make it easy to fabricate well-arranged structures using MEW device. However, the mechanical properties of PCL are not favorable for applications like bone tissue engineering. Furthermore, it is of vital importance to demonstrate the capability of MEW technique for processing a broad range of polymers. To address aforementioned problems, in this study, three ten-layered box-structured well-ordered scaffolds, including neat PLA, neat PCL, and PLA/PCL composite are fabricated using an MEW device. Printing of the composite PLA/PCL scaffold using the MEW device is conducted in this study for the first time. The MEW device used in this study is a commercial fused deposition modeling (FDM) 3D printer which with some changes in its setup and configuration becomes prepared for being used as an MEW device. Since in most of previous studies, a setup has been designed and built for MEW process, the use of the FDM device can be considered as one of the novelties of this research. The printing parameters are adjusted in a way that scaffolds with nearly equal pore sizes in the range of 140 µm to 150 µm are fabricated. However, PCL fibers are mostly narrower (diameters in the range of 5 µm to 15 µm) than PLA fibers with diameters between 15 and 25 µm. Unlike the MEW process of PCL, accurate positioning of PLA fibers is difficult which can be due to higher viscosity of PLA melt compared to PCL melt. The printed composite PLA/PCL scaffold possesses a well-ordered box structure with improved mechanical properties and cell-scaffold interactions compared to both neat PLA and PCL scaffolds. Besides, the composite scaffold exhibits a higher swelling ratio than the neat PCL scaffold which can be related to the presence of less hydrophobic PLA fibers. This scaffold demonstrates an anisotropic behavior during uniaxial tensile test in which its Young’s modulus, ultimate tensile stress, and strain to failure all depend on the direction of the applied tensile force. This anisotropy makes the composite PLA/PCL scaffold an exciting candidate for applications in heart tissue engineering. The results of in-vitro cell viability test using L929 mouse murine fibroblast and human umbilical vein endothelial (HUVEC) cells demonstrate that all of the printed scaffolds are biocompatible. In particular, the composite scaffold presents the highest cell viability value among the fabricated scaffolds. All in all, the composite PLA/PCL scaffold shows that it can be a promising substitution for neat PCL scaffold used in previous MEW studies.

New amides derived from sclareolide as anticholinesterase agents

A series of 25 amides (15 new) derived from (3aR)-(+)-sclareolide were prepared and subjected to Ellman’s assay to determine their efficacies as inhibitors for AChE or BuChE. Five amides (9, 13, 14, 15 and 17) caused inhibition of one of the enzymes greater than 60%; thereby those that inhibited BuChE were more active than positive control galantamine, and they showed better Ki values (1.07 to 8.49). In general, it was found that molecules holding a meta-substituted phenyl group showed a higher percentage of enzymatic inhibition. Molecular modelling calculations indicated the putative interactions of compounds with the amino acids residues of both enzymes AChE and BuChE. The cytotoxicity of compounds 9, 13, 14, 15 and 17 was evaluated against a non-malignant murine embryonic fibroblast cell line (NIH 3T3). Of special note is compound 15, as it presented the second-best Ki value for BuChE (1.71), was not cytotoxic (EC50 > 30 μM). Compound 15 also does not violate Lipinski rules, and showed permeability in the blood brain barrier, indicating that it can be considered a lead for the development of new drugs to treat Alzheimer’s disease.

Effect of Acyl Chain Length on Hydrophobized Cashew Gum Self-Assembling Nanoparticles: Colloidal Properties and Amphotericin B Delivery

Given its many potential applications, cashew gum hydrophobic derivatives have gained increasing attraction in recent years. We report here the effect of acyl chain length on hydrophobized cashew gum derivatives, using acetic, propionic, and butyric anhydrides on self-assembly nanoparticle properties and amphotericin B delivery. Nanoparticles with unimodal particle size distribution, highly negative zeta potential, and low PDI were produced. Butyrate cashew gum nanoparticles presented smaller size (&lt;~100 nm) than acetylated and propionate cashew gum nanoparticles and no cytotoxicity in murine fibroblast cells was observed up to 100 µg/mL for loaded and unloaded nanoparticles. As a proof of concept of the potential use of the developed nanoparticle as a drug carrier formulation, amphotericin B (AmB) was encapsulated and fully characterized in their physicochemical, AmB association and release, stability, and biological aspects. They exhibited average hydrodynamic diameter lower than ~200 nm, high AmB efficiency encapsulations (up to 94.9%), and controlled release. A decrease in AmB release with the increasing of the anhydride chain length was observed, which explains the differences in antifungal activity against Candida albicans strains. An excellent storage colloidal stability was observed for unloaded and loaded AmB without use of surfactant. Considering the AmB delivery, the acyl derivative with low chain length is shown to be the best one, as it has high drug loading and AmB release, as well as low minimum inhibitory concentration against Candida albicans strains.