Multilayer Perceptron Research Articles

IDLB-Pred: identification of disordered lipid binding residues in protein sequences using convolutional neural network

Proteins, nucleic acids, and lipids all interact with intrinsically disordered protein areas. Lipid-binding regions are involved in a variety of biological processes as well as a number of human illnesses. The expanding body of experimental evidence for these interactions and the dearth of techniques to anticipate them from the protein sequence serve as driving forces. Although large-scale laboratory techniques are considered to be essential for equipment for studying binding residues, they are time consuming and costly, making it challenging for researchers to predict lipid binding residues. As a result, computational techniques are being looked at as a different strategy to overcome this difficulty. To predict disordered lipid-binding residues (DLBRs), we proposed iDLB-Pred predictor utilizing benchmark dataset to compute feature through extraction techniques to identify relevant patterns and information. Various classification techniques, including deep learning methods such as Convolutional Neural Networks (CNNs), Deep Neural Networks (DNNs), Multilayer Perceptrons (MLPs), Recurrent Neural Networks (RNNs), Long Short-Term Memory (LSTM) networks, and Gated Recurrent Units (GRUs), were employed for model training. The proposed model, iDLB-Pred, was rigorously validated using metrics such as accuracy, sensitivity, specificity, and Matthew’s correlation coefficient. The results demonstrate the predictor’s exceptional performance, achieving accuracy rates of 81% on an independent dataset and 86% in 10-fold cross-validation.

Semi-supervised comparative learning compensation method for chemical gas sensor drift.

The gradual and unpredictable variation in chemo-sensory signal responses when exposed to the same analyte under identical conditions, commonly referred to as sensor drift, has long been recognized as one of the most serious challenges faced by chemical sensors. The traditional drift compensation method is both labor-intensive and expensive, as it requires frequent collection and labeling of gas samples for recalibration. Introducing a small number of meaningful drift calibration samples can be an attractive strategy to reduce the computational load and improve the performance of the updated classifier. However, under the influence of drift, new challenges arise due to the difference in the distribution of source and target domain data. This paper proposes a novel algorithm framework called semi-supervised contrastive learning drift compensation (SSCLDC). The framework automatically extracts high-level abstract features based on a multilayer perceptron to better represent the structure of the source data. In addition, to address the issue of data distribution differences caused by drift between the source and target domains. We add a small number of reference sample pairs into the training for semi-supervised learning. Combining a contrastive loss function that can represent the matching degree of paired samples effectively overcomes the problem of sensor drift. The Kennard-Stone sequential algorithm is used to select the representative reference sample from the set of candidate reference samples. Experiments conducted on a widely used long-term chemical gas sensor drift dataset demonstrate that the proposed method outperforms several classic drift compensation techniques, highlighting its effectiveness and practical applicability.

One-dimensional N-layer thermal modelling for effective machine learning training data generation for nondestructive testing of composite parts with infrared thermography

The analytical solution of the one-dimensional N-layer thermal model (NLM) was successfully employed to generate training data for a machine learning (ML) based procedure for the nondestructive inspection of carbon fiber reinforced composite parts with infrared thermography (IRT). The main objective was to identify a reliable correlation between the experimental data of a pulsed IRT experiment and the NLM prediction, thereby enabling the use of simulated data for ML training. This paper focuses on the initial stages of this process, in more detail on the analytical modelling and experimental data preprocessing, such as normalization, correction of experimental shortcomings and feature selection for machine learning. For pulse phase thermography (PPT) simulated and experimentally derived phase data was compared directly in the frequency domain. Therefore, the features for training and validation of ML were defined from those phase spectra in frequency domain. The suitability of these features for automated and reliable defect depth and/or defect material detection was investigated in both simulated and measured IRT test data. As a basis for feature selection, we used referenced and normalized phase-frequency curves as a function of defect depth. A correlation was identified between the results of the experimental and the simulated feature sets, both qualitatively and quantitatively. To demonstrate the practical applicability of this method, two different, generic ML techniques, multilayer perceptron and random forest regression, were tested as examples. The investigation was performed on plates made of multidirectional carbon fiber reinforced polymer (CFRP) with artificial defects made from three different materials.

Critical comparison of potential machine learning methods for lightning thermal damage assessment of composite laminates

The present study assesses the potential of using machine learning (ML) methods to predict the extent of lightning thermal damage in fiber-reinforced composite laminates using three supervised machine learning (SML) algorithms: (1) linear regression (LR), (2) decision tree (DT)-based, and (3) MLP models. These models were based on the 10 most significant factors that influence the severity of lightning damage, including three current waveform parameters, four material configurations, and three orthogonal electrical conductivities of each composite. All models demonstrated good performance with coefficient of determination (R2) values between 0.84 ~ 0.96. The multilayer perceptron (MLP) regression model trained with the lightning matrix damage dataset showed the most promising results (R2 > 0.94). Additional hyperparameter optimization was performed to improve the prediction performance of the baseline MLP model. The hyperparameter optimization (Adam optimizer, tanh activation function, and three hidden layers with 234 neurons) slightly improved the performance of the baseline MLP model by ~0.02, but achieved faster convergence. This result suggests that the baseline MLP model trained with the lightning matrix damage dataset is sufficiently accurate and robust. This paper highlights that ML-informed regression models can serve as an efficient first pass-estimator of lightning matrix damage in composite laminates, potentially reducing the amount of extremely time-consuming and expensive laboratory-scale lightning tests or streamlining the development of complex lightning damage models for future design.

Predicting biohydrogen production from dark fermentation of organic waste biomass using multilayer perceptron artificial neural network (MLP–ANN)

The focus on sustainable energy has increased interest in biohydrogen production through dark fermentation of organic waste biomass, offering dual benefits of energy production and waste management. Optimizing this process is challenging due to complex interactions among substrate composition, microbial consortia, and fermentation parameters. A multilayer perceptron artificial neural network model was developed to predict biohydrogen yield from organic waste. The model, trained on 180 data points from 35 studies, uses inputs, such as substrate type, inoculum type, concentration, pH, and temperature, with hydrogen yield as the output. The multilayer perceptron artificial neural network model achieved high accuracy, with a root mean square error of 0.3838, a mean absolute percentage error of 0.1938, and a coefficient of determination of 0.8381. These results demonstrate the model's effectiveness in predicting biohydrogen production, providing a valuable tool for optimizing the fermentation process and advancing sustainable energy solutions.

Evaluation of asphalt mixtures modified with low-density polyethylene and high-density polyethylene using experimental results and machine learning models

The widespread use of low-density polyethylene (LDPE) and high-density polyethylene (HDPE) plastics has resulted in a large amount of waste plastic that requires appropriate disposal or reuse. One potential solution is to use them in the modification of asphalt concrete (AC) mixtures for more sustainable highways. To study this possibility, permanent deformation and dynamic modulus (DM) of the LDPE and HDPE modified AC mixtures was investigated by conducting flow number (FN), flow time (FT) and DM tests on Superpave gyratory compacted specimens. Machine learning models; multi-layer perceptron (MLP), radial basis function neural network (RBFNN), generalized regression neural network (GRNN) and support vector machine (SVM) were used to predict the DM on the basis of frequency and temperature parameters. The model’s performance was gauged by analyzing the root mean square error, mean relative error, and coefficient of determination. The study findings revealed that the LDPE and HDPE modified AC mixtures provide 2.07 times and 1.27 times better resistance to permanent deformation, respectively, than their counterpart. It was also found that the LDPE and HDPE modified AC mixtures have 2.1 times and 1.4 times higher DM values, respectively, than the Control AC mixtures. Among the machine learning models, MLP (R2 = 0.98) showed best accuracy in predicting DM and thus is recommended to be used in similar studies due to its robustness. Additionally, the feature importance analysis revealed that frequency has the highest impact on DM predictions, followed by temperature and the inclusion of the LDPE.

AI-Powered Approaches for Hypersurface Reconstruction in Multidimensional Spaces

The present article explores the possibilities of using artificial neural networks to solve problems related to reconstructing complex geometric surfaces in Euclidean and pseudo-Euclidean spaces, examining various approaches and techniques for training the networks. The main focus is on the possibility of training a set of neural networks with information about the available surface points, which can then be used to predict and complete missing parts. A method is proposed for using separate neural networks that reconstruct surfaces in different spatial directions, employing various types of architectures, such as multilayer perceptrons, recursive networks, and feedforward networks. Experimental results show that artificial neural networks can successfully approximate both smooth surfaces and those containing singular points. The article presents the results with the smallest error, showcasing networks of different types, along with a technique for reconstructing geographic relief. A comparison is made between the results achieved by neural networks and those obtained using traditional surface approximation methods such as Bézier curves, k-nearest neighbors, principal component analysis, Markov random fields, conditional random fields, and convolutional neural networks.

AI-DPAPT: a machine learning framework for predicting PROTAC activity.

Proteolysis Targeting Chimeras are part of targeted protein degradation (TPD) techniques, which are significant for pharmacological and therapy development. Small-molecule interaction with the targeted protein is a complicated endeavor and a challenge to predict the proteins accurately. This study used machine learning algorithms and molecular fingerprinting techniques to build an AI-powered PROTAC Activity Prediction Tool that could predict PROTAC activity by examining chemical structures. The chemical structures of a diverse set of PROTAC drugs and their corresponding activities are selected as a dataset for training the tool. The processes used in this study included data preparation, feature extraction, and model training. Further, evaluation was done for the performance of the various classifiers, such as AdaBoost, Support Vector Machine, Random Forest, Gradient Boosting, and Multi-Layer Perceptron. The findings show that the methods selected here depict accurate PROTAC activities. All the models in this study showed an ROC curve better than 0.9, while the random forest on the test set of the AI-DPAPT had an area under the curve score of 0.97, thus showing accurate results. Furthermore, the study revealed significant insights into the molecular features that can influence the functions of the PROTAC. These findings can potentially increase the understanding of the structure-activity correlations involved in the TPD. Overall, the investigation contributes to computational drug development by introducing this platform powered by artificial intelligence that predicts the function of PROTAC. In addition, it sped up the processes of identifying and improving previously unknown medications. The AI-DPAPT platform can be accessed online using a web server at https://ai-protac.streamlit.app/ .

Impact of metadata in multimodal classification of bone tumours

The accurate classification of bone tumours is crucial for guiding clinical decisions regarding treatment and follow-up. However, differentiating between various tumour types is challenging due to the rarity of certain entities, high intra-class variability, and limited training data in clinical practice. This study proposes a multimodal deep learning model that integrates clinical metadata and X-ray imaging to improve the classification of primary bone tumours. The dataset comprises 1,785 radiographs from 804 patients collected between 2000 and 2020, including metadata such as age, affected bone site, tumour position, and gender. Ten tumour types were selected, with histopathology or tumour board decisions serving as the reference standard.MethodsOur model is based on the NesT image classification model and a multilayer perceptron with a joint fusion architecture. Descriptive statistics included incidence and percentage ratios for discrete parameters, and mean, standard deviation, median, and interquartile range for continuous parameters.ResultsThe mean age of the patients was 33.62 ± 18.60 years, with 54.73% being male. Our multimodal deep learning model achieved 69.7% accuracy in classifying primary bone tumours, outperforming the Vision Transformer model by five percentage points. SHAP values indicated that age had the most substantial influence among the considered metadata.ConclusionThe joint fusion approach developed in this study, integrating clinical metadata and imaging data, outperformed state-of-the-art models in classifying primary bone tumours. The use of SHAP values provided insights into the impact of different metadata on the model’s performance, highlighting the significant role of age. This approach has potential implications for improving diagnostic accuracy and understanding the influence of clinical factors in tumour classification.

Identification of non-circular profiles in hydrodynamic journal bearings

Hydrodynamic bearings, especially cylindrical radial plain journal bearings, are widely utilized in industry for their high load capacity and low friction energy losses. However, these bearings are prone to faults such as wear and ovalization, which can deform their circular profile and affect their vibrational response. Detecting these faults is essential to reduce their impact on production. This study introduces a methodology to identify hydrodynamic bearings with non-circular profiles. The bearing model and its numerical solution are implemented using the Finite Volume Method, with the effects of failures incorporated into a rotating system modeled by the Finite Element Method. A dataset is generated to reflect three common failure conditions in industrial applications: wear, ovalization, and a combination of ovalization with wear. The authors used this dataset to train a Multilayer Perceptron (MLP) neural network, which can identify the bearing profile shape based on specific attributes of the dynamic responses. The identification tests for the three fault conditions demonstrated high accuracy, particularly in distinguishing between ovalization and wear.

A hybrid predictive modeling approach for catalyzed polymerization reactors

Polymerization reactions are characterized by complex, nonlinear behaviors that pose significant challenges for conventional modeling techniques. Accurate and reliable models are crucial for advancing material science and enabling technological innovations across various industries. Conventional first-principles models often fall short in capturing the intricate dynamics of polymeric systems, leading to limitations in predictive accuracy. In this work, we propose a novel hybrid modeling approach that combines a conventional first-principles model with the strengths of a data-driven multi-layer perceptron (MLP) model and also a linear regression (LR) model to enhance the predictability of polymerization processes. Utilizing this hybrid approach significantly reduces the mean absolute error for predicting the concentrations of main reagents by 84% and 86%, respectively, in experiments with significantly deviant outcomes. Our results indicate that the model is capable of predicting the concentrations of both the main and side products with a maximum error margin of 3.5%.

A Portable Electronic Nose Coupled with Deep Learning for Enhanced Detection and Differentiation of Local Thai Craft Spirits

In this study, our primary focus is the biomimetic design and rigorous evaluation of an economically viable and portable ‘e-nose’ system, tailored for the precise detection of a broad range of volatile organic compounds (VOCs) in local Thai craft spirits. This e-nose system is innovatively equipped with cost-efficient metal oxide gas sensors and a temperature/humidity sensor, ensuring comprehensive and accurate sensing. A custom-designed real-time data acquisition system is integrated, featuring gas flow control, humidity filters, dual sensing/reference chambers, an analog-to-digital converter, and seamless data integration with a laptop. Deep learning, utilizing a multilayer perceptron (MLP), is employed to achieve highly effective classification of local Thai craft spirits, demonstrated by a perfect classification accuracy of 100% in experimental studies. This work underscores the significant potential of biomimetic principles in advancing cost-effective, portable, and analytically precise e-nose systems, offering valuable insights into future applications of advanced gas sensor technology in food, biomedical, and environmental monitoring and safety.

Enhancing indoor PM2.5 predictions based on land use and indoor environmental factors by applying machine learning and spatial modeling approaches

The presence of fine particulate matter (PM2.5) indoors constitutes a significant component of overall PM2.5 exposure, as individuals spend 90% of their time indoors; however, personal monitoring for large cohorts is often impractical. In light of this, this study seeks to employ a novel geospatial artificial intelligence (Geo-AI) coupled with machine learning (ML) approaches to develop indoor PM2.5 models. Multiple predictor variables were collected from 102 residential households, including meteorological data; elevation; land use; indoor environmental factors including human activities, building characteristics, infiltration factors, and real-time measurements; and various other factors. Geo-AI, which integrates land use regression, inverse distance weighting, and ML algorithms, was utilized to construct outdoor PM2.5 and PM10 estimates for residential households. The most influential variables were identified via correlation analysis and stepwise regression. Three ML methods, namely support vector machine, multiple linear regression, and multilayer perceptron (MLP) were used to estimate indoor PM2.5 concentration. Then, MLP was employed to blend three ML algorithms. The resulting model demonstrated commendable performance, achieving a 10-fold cross-validation R2 of 0.92 and a root mean square error of 2.3 μg/m3 for indoor PM2.5 estimations. Notably, the combination of Geo-AI and ensembled ML models in this study outperformed all other individual models. In addition, the present study pointed out the most influential factors for indoor PM2.5 model were outdoor PM2.5, PM2.5/PM10 ratio, sampling month, infiltration factor, located near factory, cleaning frequency, number of door entrance linked with outdoor, and wall material. Further exploration of diverse ensemble model formats to integrate estimates from different models could enhance overall performance. Consequently, the potential applications of this model extend to estimating real individual exposure to PM2.5 for further epidemiological research. Moreover, the model offers valuable insights for efficient indoor air quality management and control strategies.

Revealing Fibrosis Genes as Biomarkers of Ulcerative Colitis: A Bioinformatics Study Based on ScRNA and Bulk RNA Datasets.

This study aimed to uncover biomarkers associated with fibroblasts to diagnose ulcerative colitis (UC) and predict sensitivity to TNFα inhibitors. We identified fibrosis-related genes by analyzing eight bulk RNA and one single-cell RNA sequencing dataset from UC patients. Three machine learning algorithms were employed to identify common significant genes. We utilized five machine learning models, namely Random Forest (RF), Support Vector Machine (SVM), Xgboost, Multilayer Perceptron (MLP), and Logistic Regression, to develop diagnostic models for UC. Following hyperparameter tweaking using grid search, we evaluated Matthew's Correlation Coefficient (MCC) of each model on the validation set. Finally, we identified five hub genes in UC patients and evaluated their response to infliximab or golimumab. We identified 23 genes associated with fibroblasts. Further analysis using three ML models revealed BIRC3, IFITM2, ANXA1, ISG20, and MSN as critical fibroblast genes. Following hyperparameter adjustment, the SVM model exhibited the most favorable characteristics in the validation set, achieving an MCC of 0.7. ANXA1 contributed the most to the model that predicts UC. The optimal model was implemented on the website. Among UC patients receiving TNFα inhibitor treatment, the ineffective group showed considerably increased expression of the five critical genes than the responsive group. BIRC3, IFITM2, ANXA1, ISG20, and MSN may serve as potential diagnostic biomarkers in UC. Through the interaction between characteristic biomarkers and immune infiltrating cells, the immune response mediated by these characteristic biomarkers plays a crucial role in the occurrence and development of UC.

Magnetic monopole phenomenology at future hadron colliders

Abstract In the grand tapestry of Physics, the magnetic monopole is a holy grail. Therefore, numerous efforts
are underway in search of this hypothetical particle at CMS, ATLAS and MoEDAL experiments of LHC
by employing different production mechanisms. The cornerstone of our comprehension of monopoles lies
in Dirac’s theory which outlines their characteristics and dynamics. Within this theoretical framework, an
effective U (1) gauge field theory, derived from conventional models, delineates the interaction between spin
magnetically-charged fields and ordinary photons under electric-magnetic dualization.
The focus of this paper is the production of magnetic monopoles through Drell-Yan and the Photon-Fusion
mechanisms to generate velocity-dependent scalar, fermionic, and vector monopoles of spin angular mo-
mentum 0, 1
2 , 1 respectively at LHC. A computational study compares the monopole pair-production cross-
sections for both methods at various center-of-mass energies (√s) with different magnetic dipole moments.
The comparison of kinematic distributions of monopoles at Parton and reconstructed level are demonstrated
for both DY and PF mechanisms.
Extracted results showcase how modern machine-learning techniques can be used to study the production
of magnetic monopoles at the Future proton-proton Particle Colliders at 100 TeV. We demonstrate the ob-
servability of magnetic monopoles against the most relevant Standard Model background using multivariate
methods such as Boosted Decision Trees (BDT), Likelihood, and Multilayer Perceptron (MLP). This study
compares the performance of these classifiers with traditional cut-based and counting approaches, proving
the superiority of our methods

Forecasting Electricity Consumption Using Function Fitting Artificial Neural Networks and Regression Methods

With the growth of smart grids, consumers now have access to new technologies that enable improvements in the quality of service provided and allow new levels of energy efficiency. Much of this increase in energy efficiency is directly related to changes in consumption habits due to the quantity and quality of information made available by new technologies. At this point, short-term consumption forecasting can be considered an effective information tool in the search for better consumption patterns and energy efficiency. This paper presents prediction tests combining the result obtained from an artificial neural network and regression methods. The artificial neural network used was the Multilayer Perceptron (MLP), and its results were compared with polynomial regression techniques (first, second, and third degree), demonstrating the superiority of the network. The neural network has proven to be a highly effective tool for forecasting future data, demonstrating its ability to capture complex patterns in input data and produce accurate estimates. Additionally, the flexibility of neural networks in handling large volumes of data and their continuous adjustment capability further enhance their suitability as a robust tool for future predictions. The results corroborate the capacity of the methodology presented for short-term consumption forecasting.

Enhanced Classification of Video-Evoked Stress Response Using Power Spectral Density Features

The analysis of stress in response to videos using electroencephalography (EEG) has emerged as a significant field of research. In this study, we propose a methodology for classifying stress responses to videos using the Database for Emotion Analysis using Physiological Signals (DEAP). EEG signals are preprocessed with resampling and a median filter. We extracted Power Spectral Density (PSD) features from the alpha, beta, delta, and theta bands of the preprocessed EEG. Instances were labeled based on the valence and arousal values provided in the DEAP dataset in response to the presented videos. Four machine learning algorithms, namely Naïve Bayes (NB), Multilayer Perceptron (MLP), Logistic Regression (LR), and Sequential Minimal Optimization (SMO) classifiers, were employed to differentiate between stressed and relaxed states using a 10-fold cross-validation technique. The SMO classifier achieved the highest accuracy of 95.65%. Additionally, statistically significant variations in the alpha band using t-tests suggest that the DEAP dataset video clips can effectively induce stress and relaxation conditions in participants.

Comparative Analysis of Machine Learning Models for Predicting Student Success in Online Programming Courses: A Study Based on LMS Data and External Factors

Early prediction of student performance in online programming courses is essential for implementing timely interventions to enhance academic outcomes. This study aimed to predict academic success by comparing four machine learning models: Logistic Regression, Random Forest, Support Vector Machine (SVM), and Neural Network (Multilayer Perceptron, MLP). We analyzed data from the Moodle Learning Management System (LMS) and external factors of 591 students enrolled in online object-oriented programming courses at the Universidad Estatal de Milagro (UNEMI) between 2022 and 2023. The data were preprocessed to address class imbalance using the synthetic minority oversampling technique (SMOTE), and relevant features were selected based on Random Forest importance rankings. The models were trained and optimized using Grid Search with cross-validation. Logistic Regression achieved the highest Area Under the Receiver Operating Characteristic Curve (AUC-ROC) on the test set (0.9354), indicating strong generalization capability. SVM and Neural Network models performed adequately but were slightly outperformed by the simpler models. These findings suggest that integrating LMS data with external factors enhances early prediction of student success. Logistic Regression is a practical and interpretable tool for educational institutions to identify at-risk students, and to implement personalized interventions.

Exploring the Mechanisms and Preventive Strategies for the Progression from Idiopathic Pulmonary Fibrosis to Lung Cancer: Insights from Transcriptomics and Genetic Factors.

Background: Idiopathic pulmonary fibrosis (IPF) leads to excessive fibrous tissue in the lungs, increasing the risk of lung cancer (LC) due to heightened fibroblast activity. Advances in nucleotide point mutation studies offer insights into fibrosis-to-cancer transitions. Methods: A two-sample Mendelian randomization (TSMR) approach was used to explore the causal relationship between IPF and LC. A weighted gene co-expression network analysis (WGCNA) identified shared gene modules related to immunogenic cell death (ICD) from transcriptomic datasets. Machine learning selected key genes, and a multi-layer perceptron (MLP) model was developed for IPF prediction and diagnosis. SMR and PheWAS were used to assess the expression of key genes concerning IPF risk. The impact of core genes on immune cells in the IPF microenvironment was explored, and in vivo experiments were conducted to examine the progression from IPF to LC. Results: The TSMR approach indicated a genetic predisposition for IPF progressing to LC. The predictive model, which includes eight ICD key genes, demonstrated a strong predictive capability (AUC = 0.839). The SMR analysis revealed that the elevated expression of MS4A4A was associated with an increased risk of IPF (OR = 1.275, 95% CI: 1.029-1.579; p = 0.026). The PheWAS did not identify any significant traits linked to MS4A4A expression. The rs9265808 locus in MS4A4A was identified as a susceptibility site for the progression of IPF to LC, with mutations potentially reprogramming lung neutrophils and increasing the LC risk. In vivo studies suggested MS4A4A as a promising therapeutic target. Conclusions: A causal link between IPF and LC was established, an effective prediction model was developed, and MS4A4A was highlighted as a therapeutic target to prevent IPF from progressing to LC.

Research on Momentum Prediction of Tennis Match Based on Scoring Model and Multilayer Perceptron

During a tennis match, players may encounter various circumstances that can significantly influence their performance. This force, known as "momentum," can drastically alter the game's flow and ultimately determine the winner. Addressing the challenge of analyzing and predicting momentum shifts, this study applied the Entropy Weight TOPSIS method combined with fuzzy comprehensive evaluation to assess player performance across technical, physical, and psychological factors. These methods provided a comprehensive analysis of the players' performance metrics, revealing patterns linked to momentum changes. Following this, Pearson correlation analysis was conducted to identify key performance indicators strongly associated with match outcomes. These indicators were then integrated into a Multilayer Perceptron (MLP) model, which demonstrated high predictive accuracy, with an R-value of 0.868, effectively capturing momentum shifts in real-time. The study's findings offer valuable insights for improving strategic decision-making during matches and hold potential applications in other fields that require real-time predictive analysis.