Film Mulching Research Articles

Fabrication and Evaluation of an Alginate-Based Dual Network Mulch Film Reinforced with Multiscale Cellulose Fibers

Fabrication and Evaluation of an Alginate-Based Dual Network Mulch Film Reinforced with Multiscale Cellulose Fibers

Ecological and Economic Benefits of Greenhouse Gas Emission Reduction Strategies in Rice Production: A Case Study of the Southern Rice Propagation Base in Hainan Province

Developing tailored emission reduction strategies and estimating their potential is crucial for achieving low-carbon rice production in a specific region, as well as for advancing China’s dual carbon goals in the agricultural sector. By utilizing water-saving and drought-resistant rice (WDR) with enhanced water and nitrogen utilization efficiency, the mitigation strategies were constructed for rice production systems, and their potential for emission reduction was estimated in the southern rice propagation base of Hainan Province. This study revealed that the implementation of a reduction strategy, which involves dry direct seeding and dry cultivation, combined with a 53% reduction in nitrogen fertilizer, can effectively synergize the mitigation of methane (CH4) and nitrous oxide (N2O) emissions from rice paddies. Compared with traditional flooded rice cultivation, this integrated approach exhibits an impressive potential for reducing net greenhouse gas (GHG) emissions by 97% while simultaneously doubling economic benefits. Moreover, when combined with plastic film mulching, the strategy not only sustains rice yields but also achieves a remarkable emission reduction of 92%, leading to a fourfold increase in economic benefits. Our study provides a comprehensive low-carbon sustainable development strategy for rice production in the southern rice propagation base of Hainan Province and offers valuable insights for researching GHG emissions in other regions or crops. These emission reduction pathways and the assessment method could contribute to the realization of low-carbon agriculture.

Drip irrigation under film mulch used on flat-bed increased vegetable yield by altering soil microbe community structure and soil nitrogen

Drip irrigation under film mulch used on flat-bed increased vegetable yield by altering soil microbe community structure and soil nitrogen

Application of hyperspectral technology for leaf function monitoring and nitrogen nutrient diagnosis in soybean (Glycine max L.) production systems on the Loess Plateau of China

Farmland mulching and nitrogen application are the main agricultural management measures to improve soybean (Glycine max L.) production in dryland agriculture on the Loess Plateau. However, the interaction effects of various farmland mulching materials and nitrogen application rates on soybean leaf functionality and nitrogen nutrition status remains contradictory and inconclusive, and effective and rapid diagnostic of the leaf functionality and nitrogen status are still not well-understood. Therefore, the aim of this study is twofold: 1) to investigate the interactive effects of different mulching methods and nitrogen application levels on soybean leaf growth, physiological traits, and final grain yield throughout the entire growth period; 2) to establish a chlorophyll content monitoring model based on spectral parameters and a diagnostic model for soybean nitrogen status, and to assess the effectiveness of the latter in accurately diagnosing soybean nitrogen requirements. A two-year (2021 and 2022) field experiment, which consisted of four nitrogen levels (0, 60, 120 and 180 kg N ha−1) and four mulching strategies (NM: no mulching, SM: straw mulching, FM: film mulching, SFM: straw and film mulching), was conducted in the soybean growing seasons. Subsequently, nitrogen dilution curves were established based on chlorophyll content and the optimal spectral index to compute corresponding nitrogen nutrition index (NNI) values. The results indicated that: 1) FM, in comparison to SM and SFM, had the ability to delay leaf senescence, increase chlorophyll content, and improve physiological growth parameters, thereby increasing seed yield; 2) the application of 120 kg N ha−1 stood out, boosting soybean photosynthetic productivity and providing a solid foundation for high soybean yields; 3) the Random forest (RF) model had the highest accuracy in chlorophyll content estimation (R2 =0.854, RMSE=2.765 and MRE=5.758 % in validation set); and 4) both the nitrogen dilution curves constructed based on chlorophyll content and the optimal spectral index proved to be reasonably accurate in quantitatively diagnosing the nitrogen status of soybeans. Specifically, N0 and N180 indicated sustained nitrogen deficiency and excess, respectively, while N60 and N120 effectively met soybean's nitrogen requirements. In summary, the FMN120 effectively stabilized seed yield by regulating key functional traits in soybean leaves. This study provides a theoretical basis for the application of precision agriculture and remote sensing technology in monitoring and diagnosing plant nitrogen nutrition in soybean production.

Response of plastic film mulched maize to soil and atmospheric water stresses in an arid irrigation area

Water stress can severely decrease crop productivity by restricting photosynthesis, while the use of plastic film mulching can mitigate these water stress effects. However, the intricacies of photosynthetic and stomatal responses to soil water stress under plastic film mulching, particularly when combined with atmospheric water stress, have not been well studied, especially in arid irrigation areas. Limited research has investigated photosynthetic chlorophyll fluorescence parameters, stomatal responses, grain filling process and crop productivity to soil and atmospheric water stress under plastic film mulching. Our study addresses this knowledge gap through a comprehensive field experiment in an arid irrigation area involving maize (Zea mays L.). Well-watered and water deficit conditions with and without plastic film mulching treatments, alone or combined with atmospheric water stress (different vapor pressure deficits) were conducted. Our findings revealed that soil water stress significantly increased stomatal limitations (by 6.4–12.4 %) and may cause non-stomatal limitations. Plastic film mulching significantly improved plant photosynthetic performance (increased net photosynthesis rate by 12.2–39.8 %), chlorophyll fluorescence parameters, and stomatal regulation. Under mulched conditions, soil water stress primarily affected photosynthetic performance through stomatal limitations. Moreover, plastic film mulching significantly improved grain filling process (increased grain-filling rate by 6.3–78.5 %) and productivity (increased grain yield by 12.1–45.8 %) in spring maize subjected to soil water stress. Atmospheric water stress, alone or combined with soil water stress, influenced plant photosynthetic performance, decreasing the net photosynthesis rate and stomatal conductance. Mulching enhanced photosynthetic performance under atmospheric water stress. Overall, the positive effect of mulching on spring maize photosynthetic performance and productivity under soil and atmospheric water stresses holds promise for alleviating water resource shortages and addressing global climate warming issues in arid irrigation areas.

Estimation of Soil Moisture Content Based on Fractional Differential and Optimal Spectral Index

Applying hyperspectral remote sensing technology to the prediction of soil moisture content (SMC) during the growth stage of soybean emerges as an effective approach, imperative for advancing the development of modern precision agriculture. This investigation focuses on SMC during the flowering stage under varying nitrogen application levels and film mulching treatments. The soybean canopy’s original hyperspectral data, acquired at the flowering stage, underwent 0–2-order differential transformation (with a step size of 0.5). Five spectral indices exhibiting the highest correlation with SMC were identified as optimal inputs. Three machine learning methods, namely support vector machine (SVM), random forest (RF), and back propagation neural network (BPNN), were employed to formulate the SMC prediction model. The results indicate the following: (1) The correlation between the optimal spectral index of each order, obtained after fractional differential transformation, and SMC significantly improved compared to the original hyperspectral reflectance data. The average correlation coefficient between each spectral index and SMC under the 1.5-order treatment was 0.380% higher than that of the original spectral index, with mNDI showing the highest correlation coefficient at 0.766. (2) In instances of utilizing the same modeling method with different input variables, the SMC prediction model’s accuracy follows the order: 1.5 order > 2.0 order > 1.0 order > 0.5 order > original order. Conversely, with consistent input variables and a change in the modeling method, the accuracy order becomes RF > SVM > BPNN. When comprehensively assessing model evaluation indicators, the 1.5-order differential method and RF method emerge as the preferred order differential method and model construction method, respectively. The R2 for the optimal SMC estimation model in the modeling set and validation set were 0.912 and 0.792, RMSEs were 0.005 and 0.004, and MREs were 2.390% and 2.380%, respectively. This study lays the groundwork for future applications of hyperspectral remote sensing technology in developing soil moisture content estimation models for various crop growth stages and sparks discussions on enhancing the accuracy of these different soil moisture content estimation models.

Effects of farmland residual mulch film-derived microplastics on the structure and function of soil and earthworm Metaphire guillelmi gut microbiota

Microplastics derived from polyethylene (PE) mulch films are widely found in farmland soils and present considerable potential threats to agricultural soil ecosystems. However, the influence of microplastics derived from PE mulch films, especially those derived from farmland residual PE mulch films, on soil ecosystems remains unclear. In this study, we analyzed the bacterial communities attached to farmland residual transparent PE mulch film (FRMF) collected from peanut fields and the different ecological effects of unused PE mulch film-derived microplastics (MPs) and FRMF-derived microplastics (MPs-aged) on the soil and earthworm Metaphire guillelmi gut microbiota, functional traits, and co-occurrence patterns. The results showed that the assembly and functional patterns of the bacterial communities attached to the FRMF were clearly distinct from those in the surrounding farmland soil, and the FRMF enriched some potential plastic-degrading and pathogenic bacteria, such as Nocardioidaceae, Clostridiaceae, Micrococcaceae, and Mycobacteriaceae. MPs substantially influenced the assembly and functional traits of soil bacterial communities; however, they only significantly changed the functional traits of earthworm gut bacterial communities. MPs-aged considerably affected the assembly and functional traits of both soil and earthworm gut bacterial communities. Notably, MPs had a more remarkable effect on nitrogen-related functions than the MPs-aged in numbers for both soil and earthworm gut samples. Co-occurrence network analysis revealed that both MPs and MPs-aged enhanced the synergistic interactions among operational taxonomic units (OTUs) of the composition networks for all samples. For community functional networks, MPs and MPs-aged enhanced the antagonistic interactions for soil samples; however, they exhibited contrasting effects for earthworm gut samples, as MPs enhanced the synergistic interactions among the functional contents. These findings broaden and deepen our understanding of the effects of FRMF-derived microplastics on soil ecosystems, suggesting that the harmful effects of aged plastics on the ecological environment should be considered.

Responses of soil nutrients, enzyme activities, and maize yield to straw and plastic film mulching in coastal saline-alkaline

Responses of soil nutrients, enzyme activities, and maize yield to straw and plastic film mulching in coastal saline-alkaline

Cultivation of forage maize in boreal conditions – Assessment of trade-offs between increased productivity and environmental impact

The cultivation of whole crop forage maize (Zea mays L.) for cattle feed has a potential for increased forage yield while reducing nitrogen (N) fertilisation compared to perennial grass-based systems. However, the possible environmental trade-offs of forage maize cultivation remain unknown in the boreal region due to the short growing season which limits cultivation practices. The aim of this study was to compare the environmental impact of forage maize with more widely cultivated forage crops in Finland that include perennial silage grass mixtures and whole crop spring cereal harvested as silage. The use of plastic mulch film in forage maize cultivation was included in the assessment as well. A life cycle assessment (LCA) was conducted including impact categories for global warming potential; marine and freshwater eutrophication; terrestrial acidification; freshwater, marine and terrestrial ecotoxicity; land use; and fossil resource depletion. Additionally, soil organic carbon (SOC) stock changes under long-term cultivation of the studied forage crops were simulated with the C-TOOL and Yasso20 models with methodological comparisons. The only clear differences between the studied crops were that the land use was lower (−26–48%) for forage maize, and the freshwater eutrophication (+59–67%) and terrestrial acidification (+10–57%) were higher for perennial grasses compared with other forages. A risk for decreased SOC stock under continuous forage maize cultivation was observed. Forage maize could be used to supplement perennial grass cultivation without major associated environmental risks. Future research shall be conducted on the effect of forage choices on the environmental impact of boreal dairy milk production and on decreasing the current high uncertainty associated with nitrous oxide (N2O) emission factors and SOC stock modelling choices.

Exploring the Feasibility of Integrating Weed and Nitrogen Management with Seed Meals in Organic Vegetables

Corn gluten meal (CGM) and soybean meal (SBM) have demonstrated value as bioherbicides and organic fertilizers, but suggested application rates usually target either weed suppression or crop nutrition, not both. The objective of this study was to explore the feasibility of integrating weed and nitrogen management by evaluating effects of increasing seed meal rates within planting holes of plastic mulch film on weed density, soil nitrogen availability, and crop yield in tomato (Solanum lycopersicum) and broccoli (Brassica oleracea). CGM (10% N) or SBM (7% N) were applied at rates of 0.5, 1, 2, 3.5, or 5 g planting hole−1 N (depending on crop and year) after crops were transplanted, and 40 weed seeds per planting hole were seeded. Weed density decreased with increasing seed meal rate, regardless of type, and velvetleaf (Abutilon theophrasti) was more susceptible than the grass weeds tested. Velvetleaf suppression at the 5 g planting hole−1 N rate ranged from 66% to 97%, relative to the weedy control. Soil nitrogen availability increased with the application rate, but ammonium mineralized from seed meals applied at the highest rates were likely phytotoxic to weeds and crops. Seed meals never increased the crop yield and reduced the tomato yield in 2018 by 39% to 64%, relative to the weed-free control. The results suggest that integrating the management of weeds and nitrogen with seed meals in plastic mulch planting holes is not feasible because application rates required for consistent weed suppression are also toxic to crops.

Changes in soil microbial functions involved in the carbon cycle response to conventional and biodegradable microplastics

Biodegradable mulch film has become an encouraging alternative to conventional petroleum–based plastic, but it is likely to generate more microplastics (MPs) than conventional films with lower resistance and thus profoundly affects the soil environment. However, the effects of biodegradable (BMPs) and conventional polyethylene MPs (PE–MPs) on soil microbial carbon (C) cycle remain unclear. Here, metagenomic sequencing was used to investigate microbial functional and relative taxonomic traits in response to PE–MP and BMP addition (5 % w/w) via a soil microcosm experiment. The results showed that the presence of BMPs, rather than PE–MPs, significantly changed soil microbial C cycling patterns at the functional and taxonomic levels. In soils, BMP addition significantly increased the abundances of genes regulating aerobic respiration, C decomposition (intracellular), C fixation, fermentation and CO oxidation pathways compared to those in the control and PE–MP added soils. Specifically, BMPs promoted soil starch and PHA (liable C) degradation, acetate and ethanol fermentation, Calvin–Benson–Bassham (CBB) cycle and 3–hydroxypropionate/4–hydroxybutyrate (3HP/4HB) associated with C fixation. Most of these C cycling pathways were further strengthened in the microplastisphere of BMPs. Furthermore, MPs selectively enriched specific taxa on their surface and subsequently increased their abundance in soils; Bradyrhizobium, Ramlibacter and Variovorax (enriched by BMPs) positively regulated labile C degradation, and Amycolatopsis and Nocardia (enriched by PE–MPs) promoted recalcitrant C degradation. Moreover, Pseudonocardia and Variovorax that were enriched by BMPs improved C dissimilation and assimilation by regulating fermentation and C fixation processes, respectively. Taken together, these results improve the understanding of the influence of conventional and biodegradable MPs on soil C cycling pathways and related microbial communities, highlighting that the presence of BMPs rather than PE–MPs accelerates soil C turnover.

Evaluation of the sorption/desorption processes of pesticides in biodegradable mulch films used in agriculture

Microplastics from mulch films can be a source of chemical contamination to agricultural soils. In this context, biodegradable films have been widely positioned as a greener choice. However, their sorption/desorption capabilities, in contrast to the conventional plastic types remain understudied. It is for this reason that objective evaluation of their interactions with residual agricultural contaminants becomes important. Our findings reveal that polyethylene (PE) mulch films retained lower amounts of pesticide residues and demonstrated a higher desorption/release [median desorption = 71.86 μg/L or about 50%], while polybutylene adipate terephthalate (PBAT) mulch films retained higher amounts of pesticide residues onto their surface and demonstrated a much lower desorption [median desorption = 24.27 μg/L or about 17%] after a spraying event. A higher ambient temperature had no significant effect on final desorption amounts in both PE [median = 65.27 μg/L at 20 °C and 74.23 μg/L at 40 °C] and PBAT [median = 24.26 μg/L at 20 °C and 24.78 μg/L at 40 °C] mulch films. However, it did favour a faster desorption pace in PE films. Desorption in PBAT and PE plastic types was correlated with the log Kow value [Spearman's correlation: 0.857 and 0.837 respectively, p < 0.05]. However, only a moderate correlation with pKa was observed in PBAT [Spearman's correlation: 0.478, p < 0.05], while none for PE plastic type. Sorption of pesticides onto biodegradable PBAT microplastics were best explained by Elovich [R2: 0.937–0.959] and pseudo-second order kinetics [R2: 0.942–0.987], suggesting the presence of chemisorption. Furthermore, Weber Morris plots suggested the presence of a multi-step process and Boyd plots indicated that film diffusion or chemical bond formation was the rate-limiting step governing this phenomenon.

Environmental and economic assessment of biodegradable and compostable alternatives for plastic materials in greenhouses

Plastics and other materials commonly used in horticulture for plant support (e.g. raffia) and soil protection (e.g. mulching film) pose a challenge to achieving a circular economy. These materials contaminate plant residues, hampering their direct reuse due to the need for separation and cleaning. As a result, contaminated plant residues is often landfilled or incinerated. This study investigates the replacement of conventional plastic raffia and mulching film with biodegradable and compostable alternatives. Polypropylene raffia is compared with a biodegradable viscose polymer and compostable jute fibre, while polyethylene mulching film is compared with a biodegradable polylactic acid film. Conventional and novel alternatives are compared economically using Life-Cycle Costing and environmentally using Life-Cycle Assessment. The economic assessment is based on case studies with two horticultural companies in Almeria (south-eastern Spain), while the environmental analysis uses data from the Ecoinvent database. The use of biodegradable and compostable alternatives for raffia and mulching film proved to be 49% more expensive than conventional options. However, when conventional plastic waste is incinerated rather than landfilled, biodegradable and compostable alternatives have a lower carbon footprint. Although biodegradable and compostable options can be more expensive and have higher impacts in certain situations, proper waste management can lead to environmental benefits. With optimisation and incentives, these alternative options support the transition of horticulture to a sustainable circular economy.

A biodegradable oxidized starch/carboxymethyl chitosan film coated with pesticide-loaded ZIF-8 for tomato fusarium wilt control

Film mulching is one of the most important methods to control soil-borne diseases. However, the traditional mulch may cause microplastic pollution and soil ecological damage. Herein, a biodegradable film was developed using oxidized starch and carboxymethyl chitosan and incorporated ZIF-8 carrying fludioxonil to sustainably control soil-borne disease. The microstructure, mechanical properties, optical properties, and water barrier properties of the composite films (Flu@ZIF-8-OS/CMCS) were investigated. The results show that Flu@ZIF-8-OS/CMCS had a smooth and uniform surface and excellent light transmittance. The excellent mechanical properties of the films were verified by tensile strength, elongation at break and Young's modulus. Higher contact angle and lower water vapor permeability indicate water retention capacity of the soil was improved through using Flu@ZIF-8-OS/CMCS. Furthermore, the release properties, biological activity, degradability and safety to soil organisms of Flu@ZIF-8-OS/CMCS was determined. The addition of ZIF-8 significantly improved the film's ability to retard the release of Flu, while the Flu@ZIF-8-OS/CMCS has good soil degradability. In vitro antifungal assays and pot experiments demonstrated excellent inhibitory activity against Fusarium oxysporum f. sp. Lycopersici. Flu@ZIF-8-OS/CMCS caused only 13.33 % mortality of earthworms within 7 d. This research provides a new approach to reducing microplastic pollution and effectively managing soil-borne diseases.

Effects of the Cultivation Methods on the Sensory Quality and Phytochemical Profiles of Satsuma Mandarin (Citrus unshiu)

Citrus fruits have a distinctive flavor and can convey health benefits because of their unique phytochemicals. Phytochemical profiles are influenced by many factors, including variety and environmental growing conditions; however, the effect of the cultivation methods on the phytochemical profile of Satsuma mandarin (Citrus unshiu) has received little attention. In this study, we examined the relationships between the cultivation conditions, sensory quality, and phytochemical profiles of C. unshiu cultivated using four methods: open field, greenhouse, film mulching, and tunnel farming. The soil water content differed significantly between the cultivation methods and showed a strong positive correlation with sourness, bitterness, and astringency and a strong negative correlation with sweetness. The metabolites of C. unshiu were not associated with the soil water content but with the soil mineral content, including nitrogen (N+), phosphorus (P+), and potassium (K+). The soil P+ and K+ content was positively correlated with most secondary metabolites. The relative abundance of sugars did not differ significantly between the cultivation methods; however, the sweetness was higher under film mulching than under the other cultivation methods because of the suppression of sweetness by bitter compounds. We did not investigate the effect of other growing conditions, such as sunlight; however, the results improve our understanding of the effect of cultivation methods on the quality of C. unshiu and may inform crucial decisions concerning citrus cultivation.

Homogeneous PVA/sodium lignosulfonate mulch films with improved mechanical and UV/water vapor barrier properties

Homogeneous poly(vinyl alcohol) (PVA)/sodium lignosulfonate (SL) mulch films with good water vapor barrier property, excellent mechanical properties and UV barrier properties were prepared. Effects of SL content on PVA/SL films were investigated by SEM, FTIR, XRD and physical properties, including thickness, density, swelling, water hydrolysis UV/water barrier and mechanical properties. The results illustrated that the films were homogenous and compact, avoiding the aggregation of SL. The integration of SL into PVA matrix dramatically enhanced the properties of mechanical property and UV barrier and water barrier property. The PVA/SL films showed lower swelling ratio in various pH media, lower light transmittance and better biodegradability compared with PVA film. The higher SL content was, the lower swelling ratio and light transmittance, and the stronger UV barrier property of PVA/SL films were. The PVA/SL film with 30 wt% SL addition on PVA basis exhibited the best mechanical properties, including tensile strength of 45 MPa, elongation at break of 307.2% and variable Young's modulus. This work showed a meaningful and simple method to prepare biodegradable functional homogenous films for potential applications of agricultural mulch films.

Irrigation and Fertilization Scheduling for Peanut Cultivation under Mulched Drip Irrigation in a Desert-Oasis Area.

The aim of this study was to investigate the impact of water and nitrogen regulation on the characteristics of water and fertilizer demands and the yield, quality, and efficiencies of the water and nitrogen utilization of peanuts cultivated under mulched drip irrigation in a desert-oasis region. The experiment, conducted in Urumqi, Xinjiang, centered on elucidating the response mechanisms governing peanut growth, yield, quality, water consumption patterns, and fertilizer characteristics during the reproductive period under the influence of water and nitrogen regulation. In the field experiments, three irrigation levels were implemented, denoted as W1 (irrigation water quota of 22.5 mm), W2 (irrigation water quota of 30 mm), and W3 (irrigation water quota of 37.5 mm). Additionally, two nitrogen application levels, labeled N1 (nitrogen application rate of 77.5 kg·ha-1) and N2 (a nitrogen application rate of 110 kg·ha-1), were applied, resulting in seven treatments. A control treatment (CK), which involved no nitrogen application, was also included in the experimental design. The results indicate a direct correlation between the increment in the irrigation quota and increases in farmland water-related parameters, including water consumption, daily water consumption intensity, and water consumption percentage. The nitrogen harvest index (NHI) demonstrated a higher value in the absence of nitrogen application compared to the treatment with elevated nitrogen levels. The application of nitrogen resulted in an elevation in both nitrogen accumulation and nitrogen absorption efficiency within pods and plants. When subjected to identical nitrogen application conditions, irrigation proved to be advantageous in enhancing water-use efficiency (WUE), nitrogen partial factor productivity (NPFP), and the yield of peanut pods. The contribution rate of water to pod yield and WUE exceeded that of nitrogen, while the contribution rate of nitrogen to nitrogen-use efficiency (NUE) was higher. The total water consumption for achieving a high yield and enhanced water- and nitrogen-use efficiencies in peanuts cultivated under drip irrigation with film mulching was approximately 402.57 mm. Taking into account yield, quality, and water- and nitrogen-used efficiencies, the use of an irrigation quota of 37.5 mm, an irrigation cycle of 10-15 days, and a nitrogen application rate of 110 kg·ha-1 can be regarded as an appropriate water and nitrogen management approach for peanut cultivation under mulched drip irrigation in Xinjiang.

Innovative farming techniques for superior okra yield in Chitwan, Nepal: The benefits of plastic film mulch and pest exclusion net on soil properties, growth, quality and profitability

Okra (Abelmoschus esculentus) is a large-acreage cultivated, nutritious, commercial fruit vegetable crop in tropical and subtropical regions that plays a dominant role in Nepalese cuisine in the summer. Modified growing conditions through pest exclusion nets (PEN) and types of mulch on okra might be effective techniques to enhance yield and marketable production. Research is performed to investigate the effects of PEN and plastic film on the performance and yield of okra. An experiment laid out single factorial randomized complete block design with four replications and five treatments consists of: a) Control (No net + no mulch), b) Organic mulch (Rice straw mulch), c) Black plastic mulch, d) Silver plastic mulch, e) Pest exclusion net + black plastic mulch; on Swastik-2 F1 variety. The data were analyzed R software at the (p ≤ 0.05) level of significance and mean comparison is done using (Dunken Multiple Range Test) DMRT. This study revealed that silver plastic mulch and black plastic mulch treatment statistically resulted in pars & significantly higher yield (30.74 and 29.39 mt ha−1), leaf number/plant (27.98 and 26.73), branch number/plant (5 all), fruit number/plant (33 & 29) and the lowest days to flowering (39 & 40 days) compared to control; while PEN+black plastic mulching treatment resulted in higher plant height (212.93 cm), stem diameter (2.54 cm), fruit length (18.26 cm), fruit diameter (1.73 cm), fruit weight (32.80 g), longest days to flowering (43 days) and lowest leaf number per plant (15.58), branches/plant (4), yield (20.4 mt ha−1), light intensity (110.32 lx) which is undesirable yield perspectives but insect pest population is significantly lower in PEN results superior quality than other treatmets. Black plastic films and PEN+ black mulch raise soil temperature (max 34.89 °C) and increase soil moisture (18.15% vol) during germination. Plant inside PEN +black plastic mulching received low light intensity had higher vegetative growth but found with low yield. Plants in control and straw mulch treatments were found to have low vegetative growth and yield (22.7 and 24.4 tons/ha). Farmers can use silver and Black plastic plastics mulch, which are economically more viable and Productive as compared to other treatments for commercial cultivation of okra.

Evaluation of maleic anhydride-modified chitosan as filler reinforced PBAT composite film

In this article, maleic anhydride (MA) was used to graft-modify chitosan (CS) to obtain maleic anhydride-modified chitosan (MCS). Composite films with different ratios were prepared by melt blending-extrusion pelletizing-blown film using Poly (butylene adipate-co-terephthalate) (PBAT) as the substrate and CS or MCS as the filler. These films can be utilized in a variety of ways, such as food packaging, agricultural mulching film, and more. The composite films were characterized and tested by a Fourier transform infrared (FTIR) spectrometer, thermogravimetric (TG) analysis, differential scanning calorimetry (DSC), scanning electron microscope (SEM), and electronic universal testing machine, and the effects of different fillers and filler contents on the properties of the composite films were investigated. The results showed that the thermal stability of the composite films decreased slightly with the increase in filler ratio, the melt crystallization temperature increased and then decreased, and the tensile strength and elongation at break of the composite films decreased. Compared with unmodified CS, MCS had better dispersion and compatibility when blended with PBAT, and the interaction between MCS and PBAT was greater than that of CS. The optimal filler amount of MCS was 6% for the combination of film material cost and performance considerations.

Assessing the aging and environmental implications of polyethylene mulch films in agricultural land.

Polyethylene mulch films (MFs) are widely employed in agricultural land to enhance crop yield and quality, but the MF residue causes significant environmental concerns. To promote the sustainable application of MFs, it is essential to assess their fate throughout their service life and understand the underlying degradation mechanisms. In this study, surface-exposed and soil-buried MFs were separately collected from agricultural land in Inner Mongolia, China. The variations in aging performance and corresponding property alterations of MF were thoroughly examined. The results indicated that sunlight exposure considerably hastens MF degradation, whereas buried MFs experience a more moderate aging process due to the inhibitory effects of the dark and anaerobic environment on oxidation. Surface cracking was observed in MF-Light samples as a result of photodegradation, while chemical and moisture interactions with soil caused partial perforation in MF-Soil samples. Relative to the pristine MF, the oxidation, unsaturation, and hydroxylation levels of MF-Light increased to 0.88, 0.35, and 0.73, respectively, with corresponding values for MF-Soil at 0.44, 0.13, and 0.24. The generated oxygen-containing functional groups lead to a decrease in contact angles of MF-Light and MF-Soil, enhancing their hydrophilicity. The aging process of MFs led to a decline in mechanical properties, posing challenges for recycling. Moreover, nearly all phthalate esters (PAEs) were released from MFs, regardless of sunlight exposure or soil burial. The use of MFs also impacted the abundance of soil microbial communities. Specifically, the selected polyethylene MF enriched Actinobacteriota by 75%, while reducing Chloroflexi and Firmicutes by 27% and 45%, respectively.