Morphology Of Amyloid Fibrils Research Articles

Role of Site-Specific Asparagine Deamidation in Islet Amyloid Polypeptide Amyloidogenesis: Key Contributions of Residues 14 and 21.

Deamidation of an asparagine residue is a spontaneous non-enzymatic post-translational modification that results in the conversion of asparagine into a mixture of aspartic acid and isoaspartic acid. This chemical conversion modulates protein conformation and physicochemical properties, which could lead to protein misfolding and aggregation. In this study, we investigated the effects of site-specific Asn deamidation on the amyloidogenicity of the aggregation-prone peptide islet amyloid polypeptide (IAPP). IAPP is a 37-residue peptidic hormone whose deposition as insoluble amyloid fibrils is closely associated with type 2 diabetes. Asn residues were successively substituted with an Asp or isoAsp, and amyloid formation was evaluated by a thioflavin T fluorescence assay, circular dichroism spectroscopy, atomic force microscopy, and transmission electron microscopy. Whereas deamidation at position 21 inhibited IAPP conformational conversion and amyloid formation, the N14D mutation accelerated self-assembly and led to the formation of long and thick amyloid fibrils. In contrast, IAPP was somewhat tolerant to the successive deamidation of Asn residues 22, 31, and 35. Interestingly, a small molar ratio of IAPP deamidated at position 14 promoted the formation of nucleating species and the elongation from unmodified IAPP. Besides, using the rat pancreatic β cell line INS-1E, we observed that site-specific deamidation did not significantly alter IAPP-induced toxicity. These data indicate that Asn deamidation can modulate IAPP amyloid formation and fibril morphology and that the site of modification plays a critical role. Above all, this study reinforces the notion that IAPP amyloidogenesis is governed by precise intermolecular interactions involving specific Asn side chains.

Amyloid Fibrils from Hemoglobin.

Amyloid fibrils are a class of insoluble protein nanofibers that are formed via the self-assembly of a wide range of peptides and proteins. They are increasingly exploited for a broad range of applications in bionanotechnology, such as biosensing and drug delivery, as nanowires, hydrogels, and thin films. Amyloid fibrils have been prepared from many proteins, but there has been no definitive characterization of amyloid fibrils from hemoglobin to date. Here, nanofiber formation was carried out under denaturing conditions using solutions of apo-hemoglobin extracted from bovine waste blood. A characteristic amyloid fibril morphology was confirmed by transmission electron microscopy (TEM) and atomic force microscopy (AFM), with mean fibril dimensions of approximately 5 nm diameter and up to several microns in length. The thioflavin T assay confirmed the presence of β-sheet structures in apo-hemoglobin fibrils, and X-ray fiber diffraction showed the characteristic amyloid cross-β quaternary structure. Apo-hemoglobin nanofibers demonstrated high stability over a range of temperatures (−20 to 80 °C) and pHs (2–10), and were stable in the presence of organic solvents and trypsin, confirming their potential as nanomaterials with versatile applications. This study conclusively demonstrates the formation of amyloid fibrils from hemoglobin for the first time, and also introduces a cost-effective method for amyloid fibril manufacture using meat industry by-products.

Self-assembly and morphological characterization of two-component functional amyloid proteins

Functional amyloid has been increasingly applied as self-assembling nanostructures to construct multi-functional biomaterials. However, little has been known how different side domains, varied fusion positions and subunits affect self-assembly and morphologies of amyloid fibrils. Here, we constructed three groups of two-component amyloid proteins based on CsgA, the major protein components of Escherichia coli biofilms, to bridge these gaps. We showed that all fusion proteins have amyloid features, as indicated by Congo red assay. Atomic force microscopy (AFM) indeed reveals that these fusion proteins are able to self-assemble into fibrils, with an average diameter of 0.5–2nm and length of hundreds of nanometers to several micrometers. The diameter of fibrils increases with the increase of the molecular weight of fusion domains, while the dynamic assembly of recombinant proteins was delayed as a result of the introduction of fusion domains. Moreover, fusion of the same functional domains but at intermediate position seems to cause the most interference on fibril assembly compared with those fused at C or N-terminus, as mainly short and irregular fibrils were detected. This phenomenon appears more pronounced for randomly coiled mussel foot proteins (Mfps) than for rigid chitin-binding domain (CBD). Finally, increase of the molecular weight of tandem repeats in protein monomer seemed to increase the fibril diameter of the resultant fibrils, but either reduction of the tandem repeats of CsgA to one single belta-sheet loop or increase in the number of tandem repeats of CsgAs from one to four produced shorter and intermittent fibrils compared with CsgA control protein. These studies therefore provide insights into self-assembly of two-component amyloid proteins and lay the foundation for rational design of multi-functional molecular biomaterials.

Structural model of amyloid fibrils for amyloidogenic peptide from Bgl2p–glucantransferase of S. cerevisiae cell wall and its modifying analog. New morphology of amyloid fibrils

We performed a comparative study of the process of amyloid formation by short homologous peptides with a substitution of aspartate for glutamate in position 2 – VDSWNVLVAG (AspNB) and VESWNVLVAG (GluNB) – with unblocked termini. Peptide AspNB (residues 166–175) corresponded to the predicted amyloidogenic region of the protein glucantransferase Bgl2 from the Saccharomyces cerevisiae cell wall. The process of amyloid formation was monitored by fluorescence spectroscopy (FS), electron microscopy (EM), tandem mass spectrometry (TMS), and X-ray diffraction (XD) methods. The experimental study at pH3.0 revealed formation of amyloid fibrils with similar morphology for both peptides. Moreover, we found that the morphology of fibrils made of untreated ammonia peptide is not mentioned in the literature. This morphology resembles snakes lying side by side in the form of a wave without intertwining. Irrespective of the way of the peptide preparation, the rate of fibril formation is higher for AspNB than for GluNB. However, preliminary treatment with ammonia highly affected fibril morphology especially for AspNB. Such treatment allowed us to obtain a lag period during the process of amyloid formation. It showed that the process was nucleation-dependent. With or without treatment, amyloid fibrils consisted of ring-like oligomers with the diameter of about 6nm packed either directly ring-to-ring or ring-on-ring with a slight shift. We also proposed the molecular structure of amyloid fibrils for two studied peptides.

Polymorphism of amyloid fibrils formed by a peptide from the yeast prion protein Sup35: AFM and Tip-Enhanced Raman Scattering studies

Aggregation of prion proteins is the cause of various prion related diseases. The infectious form of prions, amyloid aggregates, exist as multiple strains. The strains are thought to represent structurally different prion protein molecules packed into amyloid aggregates, but the knowledge on the structure of different types of aggregates is limited. Here we report on the use of AFM (Atomic Force Microscopy) and TERS (Tip-Enhanced Raman Scattering) to study morphological heterogeneity and access underlying conformational features of individual amyloid aggregates. Using AFM we identified the morphology of amyloid fibrils formed by the peptide (CGNNQQNY) from the yeast prion protein Sup35 that is critically involved in the aggregation of the full protein. TERS results demonstrate that morphologically different amyloid fibrils are composed of a distinct set of conformations. Fibrils formed at pH 5.6 are composed of a mixture of peptide conformations (β-sheets, random coil and α-helix) while fibrils formed in pH~2 solution primarily have β-sheets. Additionally, peak positions in the amide III region of the TERS spectra suggested that peptides have parallel arrangement of β-sheets for pH~2 fibrils and antiparallel arrangement for fibrils formed at pH 5.6. We also developed a methodology for detailed analysis of the peptide secondary structure by correlating intensity changes of Raman bands in different regions of TERS spectra. Such correlation established that structural composition of peptides is highly localized with large contribution of unordered secondary structures on a fibrillar surface.

Characterization of Inter- and Intramolecular Interactions of Amyloid Fibrils by AFM-Based Single-Molecule Force Spectroscopy

Amyloids are fibrous protein aggregates defined by shared specific structural features. Abnormal accumulation of amyloid in organs leads to amyloidosis, which results in various neurodegenerative diseases. Atomic force microscopy (AFM) has proven to be an excellent tool investigating amyloids; it has been extensively utilized to characterize its morphology, assembly process, and mechanical properties. This review summarizes studies which applied AFM to detect the inter- and intramolecular interactions of amyloid fibrils and classified the influencing factors of amyloid’s nanomechanics in detail. The characteristics of amyloid fibrils driven by inter- and intramolecular interactions, including various morphologies of amyloid fibrils, self-assembly process, and the aggregating pathway, are described. Successful examples where AFM provided abundant information about inter- and intramolecular interactions of amyloid fibrils in different environments are presented. Direct force measurement of intra- or intermolecular interactions utilizing an AFM-based tool, single-molecular force spectroscopy (SMFS), is introduced. Some mechanical information such as elasticity, adhesiveness, and strength was obtained by stretching amyloid fibrils. This review helps researchers in understanding the mechanism of amyloidogenesis and exploring the properties of amyloid using AFM techniques.

Morphology and mechanical properties of multi-stranded amyloid fibrils probed by atomistic and coarse-grained simulations

Amyloid fibrils are responsible for pathogenesis of various diseases and exhibit the structural feature of an ordered, hierarchical structure such as multi-stranded helical structure. As the multi-strandedness of amyloid fibrils has recently been found to be highly correlated with their toxicity and infectivity, it is necessary to study how the hierarchical (i.e. multi-stranded) structure of amyloid fibril is formed. Moreover, although it has recently been reported that the nanomechanics of amyloid proteins plays a key role on the amyloid-induced pathogenesis, a critical role that the multi-stranded helical structure of the fibrils plays in their nanomechanical properties has not fully characterized. In this work, we characterize the morphology and mechanical properties of multi-stranded amyloid fibrils by using equilibrium molecular dynamics simulation and elastic network model. It is shown that the helical pitch of multi-stranded amyloid fibril is linearly proportional to the number of filaments comprising the amyloid fibril, and that multi-strandedness gives rise to improving the bending rigidity of the fibril. Moreover, we have also studied the morphology and mechanical properties of a single protofilament (filament) in order to understand the effect of cross-β structure and mutation on the structures and mechanical properties of amyloid fibrils. Our study sheds light on the underlying design principles showing how the multi-stranded amyloid fibril is formed and how the structure of amyloid fibrils governs their nanomechanical properties.

Detailed Mechanism of Rapid Amyloid Fibril Self-Assembly Due to Surface Diffusion

Surface-mediated fibrillization has been considered as an alternative pathway to form amyloid fibrils under physiological conditions. In order to develop new probes and therapies for neurodegenerative diseases, such as Alzheimer's and Parkinson's diseases, it's important to explore the detailed mechanism of the surface effects. However, the surface morphologies change with time and are hard to image without staining or labeling, which may alter the process of self-assembly. In recent work, we demonstrated a label-free procedure via controlling incubation time and the drying process to monitor the kinetics of fibril growth on surfaces across many length scales. We propose an anisotropic growth model to fit the time-evolution of morphologies of amyloid fibrils forming near a surface as measured using Atomic force microscopy (AFM). Two important variables, the deposition rate and the two-dimensional diffusion coefficient, can be used as fitting variables and can be characterized by the combination of experimental data and the theoretical approach presented here.

General amyloid inhibitors? A critical examination of the inhibition of IAPP amyloid formation by inositol stereoisomers.

Islet amyloid polypeptide (IAPP or amylin) forms amyloid deposits in the islets of Langerhans; a process that is believed to contribute to the progression of type 2 diabetes and to the failure of islet transplants. An emerging theme in amyloid research is the hypothesis that the toxic species produced during amyloid formation by different polypeptides share common features and exert their effects by common mechanisms. If correct, this suggests that inhibitors of amyloid formation by one polypeptide might be effective against other amyloidogenic sequences. IAPP and Aβ, the peptide responsible for amyloid formation in Alzheimer's disease, are particularly interesting in this regard as they are both natively unfolded in their monomeric states and share some common characteristics. Comparatively little effort has been expended on the design of IAPP amyloid inhibitors, thus it is natural to inquire if Aβ inhibitors are effective against IAPP, especially since no IAPP inhibitors have been clinically approved. A range of compounds inhibit Aβ amyloid formation, including various stereoisomers of inositol. Myo-, scyllo-, and epi-inositol have been shown to induce conformational changes in Aβ and prevent Aβ amyloid fibril formation by stabilizing non-fibrillar β-sheet structures. We investigate the ability of inositol stereoisomers to inhibit amyloid formation by IAPP. The compounds do not induce a conformational change in IAPP and are ineffective inhibitors of IAPP amyloid formation, although some do lead to modest apparent changes in IAPP amyloid fibril morphology. Thus not all classes of Aβ inhibitors are effective against IAPP. This work provides a basis of comparison to work on polyphenol based inhibitors of IAPP amyloid formation and helps provide clues as to the features which render them effective. The study also helps provide information for further efforts in rational inhibitor design.

Elongation of amyloid fibrils through lateral binding of monomers revealed by total internal reflection fluorescence microscopy

Amyloid fibrils are fibrillar aggregates of denatured proteins associated with a large number of amyloidoses. The formation of amyloid fibrils has been considered to occur by nucleation and elongation. Real-time imaging of the elongation as well as linear morphology of amyloid fibrils suggests that all elongation events occur at the growing ends of fibrils. On the other hand, we suggested that monomers also bind to the lateral sides of preformed fibrils during the seed-dependent elongation, diffuse to the growing ends, and finally make further conformation changes to the mature amyloid fibrils. To examine lateral binding during the elongation of fibrils, we used islet amyloid polypeptide (IAPP), which has been associated with type II diabetes, and prepared IAPP modified with the fluorescence dye, Alexa532. By monitoring the elongation process with amyloid specific thioflavin T and Alexa532 fluorescence, we obtained overlapping images of the two fluorescence probes, which indicated lateral binding. These results are similar to the surface diffusion-dependent growth of crystals, further supporting the similarities between amyloid fibrillation and the crystallization of substances.

Detection and structural characterization of insulin prefibrilar oligomers using surface enhanced Raman spectroscopy

In vitro fibril formation typically exhibits a lag phase followed by a rapid elongation phase. Soluble prefibrilar oligomers form as multiple assembly states occur during the lag phase and, after forming a nucleus, rapidly propagate into amyloid aggregates and fibrils. The structure and morphology of amyloid fibrils have been extensively characterized over the last decades, while little is known about the structural organization of the prefibrilar oligomers or their multiple assembly states. The main difficulty in structural characterization of prefibrilar aggregates is their low concentration (pmolar) and their continual reactive conversion. Herein we overcome these difficulties by utilizing Surface-Enhanced Raman Spectroscopy (SERS) with a model amyloid peptide, insulin. SERS is a powerful analytic tool that is able to provide detection of small molecules down to a single-molecule level. Using SERS we found that during the 3 lag phase before the onset of insulin fibril formation, the amount of insulin oligomers increased more than twice after the first hour of incubation under fibrillation conditions (pH 1.6, 65°C) and then slowly decreased with time. The latter finding is kinetically linked to the conversion of the prefibrilar oligomers into fibril species. This study provides valuable new information about the time-dependent structural organization of insulin oligomers and demonstrates the power and potential of SERS for detection and structural characterization of biological specimens present at low concentrations.

The effect of limited proteolysis by different proteases on the formation of whey protein fibrils

Four proteases: trypsin, protease A, pepsin, and protease M were selected to modify whey protein concentrate (WPC) at a low degree of hydrolysis (0.1, 0.2, and 0.3%) before adjusting to pH 2.0 and heating at 90°C to gain insight into the influence of proteolysis on fibril formation. The kinetics of fibril formation were performed on native and modified WPC using the fluorescent dye thioflavin T in conjunction with transmission electron microscopy and far-UV circular dichroism spectroscopy for the morphological and secondary structural analyses. The change in surface hydrophobicity and content of free sulfhydryl groups were also observed during the formation of fibrils for the native and modified WPC. The content of aggregation and thioflavin T kinetic data indicated that the ability of fibril formation was apparently different for WPC modified by the 4 proteases. Whey protein concentrate modified by trypsin aggregated more during heating and the fibril formation rate was faster than that of the native WPC. Whey protein concentrate modified by the other proteases showed slower aggregation with worse amyloid fibril morphology. Compared with the native WPC, the structure of WPC changed differently after being modified by proteases. The state of α-helix structure for modified WPC played the most important role in the formation of fibrils. Under the mild conditions used in this work, the α-helix structure of WPC modified by trypsin caused little destruction and resulted in fibrils with good morphology; the content of α-helices for WPC modified by other proteases decreased to 36.19 to 50.94%; thus, fibril formation was inhibited. In addition, it was beneficial for the modified WPC to form fibrils such that the surface hydrophobicity increased and the content of free sulfhydryl groups slightly decreased during heating.

Different morphology of amyloid fibrils originating from agitated and non-agitated conditions

In vitro amyloid formation has been suggested to be a common property of any polypeptide chain depending on particular environmental conditions although in vivo amyloid fibril formation can be promoted by point mutations or triplet expansions. Here, we explored the influence of agitation on fibril formation of amyloidogenic alanine segments fused to Cold Shock Protein B (CspB) of Bacillus subtilis. While without agitation fibril formation was clearly dependent on the presence of an amyloidogenic alanine segment, fibril formation was independent of the amyloidogenic segment under agitation. Agitation even led to fibrillation of native CspB lacking the amyloidogenic segment. Furthermore, agitation not only influenced the kinetics of fibril formation, but also resulted in completely different fibril morphologies. These results indicate that experimental conditions can alter the region that undergoes a conformational change during in vitro fibrillation. Moreover, the data show that deductions from in vitro assays on in vivo fibril formation mechanisms are afflicted with a certain degree of uncertainty and therefore need to be cautiously discussed.

Small Amphipathic Molecules Modulate Secondary Structure and Amyloid Fibril-forming Kinetics of Alzheimer Disease Peptide Aβ1–42

Amyloid fibril formation is associated with a number of debilitating systemic and neurodegenerative diseases. One of the most prominent is Alzheimer disease in which aggregation and deposition of the Aβ peptide occur. Aβ is widely considered to mediate the extensive neuronal loss observed in this disease through the formation of soluble oligomeric species, with the final fibrillar end product of the aggregation process being relatively inert. Factors that influence the aggregation of these amyloid-forming proteins are therefore very important. We have screened a library of 96 amphipathic molecules for effects on Aβ(1-42) aggregation and self-association. We find, using thioflavin T fluorescence and electron microscopy assays, that 30 of the molecules inhibit the aggregation process, whereas 36 activate fibril formation. Several activators and inhibitors were subjected to further analysis using analytical ultracentrifugation and circular dichroism. Activators typically display a 1:10 peptide:detergent stoichiometry for maximal activation, whereas the inhibitors are effective at a 1:1 stoichiometry. Analytical ultracentrifugation and circular dichroism experiments show that activators promote a mixture of unfolded and β-sheet structures and rapidly form large aggregates, whereas inhibitors induce α-helical structures that form stable dimeric/trimeric oligomers. The results suggest that Aβ(1-42) contains at least one small molecule binding site, which modulates the secondary structure and aggregation processes. Further studies of the binding of these compounds to Aβ may provide insight for developing therapeutic strategies aimed at stabilizing Aβ in a favorable conformation.

Positional Effects of Phosphorylation on the Stability and Morphology of Tau-Related Amyloid Fibrils

Hyperphosphorylated forms of tau protein are the main component of paired helical filaments (PHFs) of neurofibrillary tangles in the brain of Alzheimer's disease patients. To understand the effect of phosphorylation on the fibrillation of tau, we utilized tau-derived phosphorylated peptides. The V(306)QIVYK(311) sequence (PHF6) in the microtubule-binding domain is known to play a key role in the fibrillation of tau, and the short peptide corresponding to the PHF6 sequence forms amyloid-type fibrils similar to those generated by full-length tau. We focused on the amino acid residue located at the N-terminus of the PHF6 sequence, serine or lysine in the native isoform of tau, and synthesized the PHF6 derivative peptides with serine or lysine at the N-terminus of PHF6. Peptides phosphorylated at serine and/or tyrosine were synthesized to mimic the possible phosphorylation at these positions. The critical concentrations of the fibrillation of peptides were determined to quantitatively assess fibril stability. The peptide with the net charge of near zero tended to form stable fibrils. Interestingly, the peptide phosphorylated at the N-terminal serine residue exhibited remarkably low fibrillation propensity as compared to the peptide possessing the same net charge. Transmission electron microscopy measurements of the fibrils visualized the paired helical or straight fibers and segregated masses of the fibers or heterogeneous rodlike fibers depending on the phosphorylation status. Further analyses of the fibrils by the X-ray fiber diffraction method and Fourier transform infrared spectroscopic measurements indicated that all the peptides shared a common cross-β structure. In addition, the phosphoserine-containing peptides showed the characteristics of β-sandwiches that could interact with both faces of the β-sheet. On the basis of these observations, possible protofilament models with four β-sheets were constructed to consider the positional effects of the serine and/or tyrosine phosphorylations. The electrostatic intersheet interaction between phosphate groups and the amino group of lysine enhanced the lateral association between β-sheets to compensate for the excess charge. In addition to the previously postulated net charge of the peptide, the position of the charged residue plays a critical role in the amyloid fibrillation of tau.

Scanning ion conductance microscopy studies of amyloid fibrils at nanoscale

Atomic force microscopy (AFM) has developed to become a very versatile nano-scale technique to reveal the three-dimensional (3D) morphology of amyloid aggregates under physiological conditions. However, the imaging principle of AFM is based on measuring the 'force' between a sharp tip and a given nanostructure, which may cause mechanical deformation of relatively soft objects. To avoid the deformation, scanning ion conductance microscopy (SICM) is an alternative scanning probe microscopy technique, operating with alternating current mode. Here we can indeed reveal the 3D morphology of amyloid fibrils and it is capable of exploring proteins with nanoscale resolution. Compared with conventional AFM, we show that SICM can provide precise height measurements of amyloid protein aggregates, a feature that enables us to obtain unique insight into the detailed nucleation and growth mechanisms behind amyloid self-assembly.

Morphology and Persistence Length of Amyloid Fibrils Are Correlated to Peptide Molecular Structure

The formation of amyloid fibrils is a self-assembly process of peptides or proteins. The superior mechanical properties of these fibrils make them interesting for materials science but constitute a problem in amyloid-related diseases. Amyloid structures tend to be polymorphic, and their structure depends on growth conditions. To understand and control the assembly process, insights into the relation between the mechanical properties and molecular structure are essential. We prepared long, straight as well as short, worm-like β-lactoglobulin amyloid fibrils and determined their morphology and persistence length by atomic force microscopy (AFM) and the molecular conformation using vibrational sum-frequency generation (VSFG) spectroscopy. We show that long fibrils with near-100% β-sheet content have a 40-times higher persistence length than short, worm-like fibrils with β-sheet contents below 80%.

The impact of protein disulfide bonds on the amyloid fibril morphology

Amyloid fibrils are associated with many neurodegenerative diseases. Being formed from more than 20 different proteins that are functionally or structurally unrelated, amyloid fibrils share a common cross-β core structure. It is a well-accepted hypothesis that fibril biological activity and the associated toxicity vary with their morphology. Partial denaturation of a native protein usually precedes the initial stage of fibrillation, namely the nucleation process. Low pH and elevated temperature, typical conditions of amyloid fibril formation in vitro, resulted in partial denaturation of the proteins. Cleavage of disulfide bonds results typically in significant disruption of protein native structure and in the formation of the molten global state. Herein we report on a comparative investigation of fibril formation by apo-α-lactalbumin and its analog that contains only one of the four original disulfide bonds using deep UV resonance and non-resonance Raman spectroscopy and atomic force microscopy. Significant differences in the aggregation mechanism and the resulting fibril morphology were found.

High-Affinity Amphipathic Modulators of Amyloid Fibril Nucleation and Elongation

The misfolding and aggregation of proteins to form amyloid fibrils are associated with a number of debilitating, age-related diseases. Many of the proteins that form amyloid in vivo are lipid-binding proteins, accounting for the significant impact of lipids on the rate of formation and morphology of amyloid fibrils. To systematically investigate the effect of lipid-like compounds, we screened a range of amphipathic lipids and detergents for their effect on amyloid fibril formation by human apolipoprotein (apo) C-II. The initial screen, conducted using a set of amphiphiles at half critical micelle concentration, identified several activators and inhibitors that were selected for further analysis. Sedimentation analysis and circular dichroism studies of apoC-II at low, non-fibril-forming concentrations (0.05 mg/ml) revealed that all of the inhibitors induced the formation of apoC-II dimers enriched in α-helical content while the activators promoted the formation of stable apoC-II tetramers with increased β-structure. Kinetic analysis identified modulators of apoC-II fibril formation that were effective at concentrations as low as 10 μM, corresponding to a modulator-to-apoC-II ratio of approximately 1:10. Delayed addition of the test compounds after fibril formation had commenced allowed the effects of selected amphiphiles on fibril elongation to be determined separately from their effects on fibril nucleation. The results indicated that specific amphiphiles induce structural changes in apoC-II that cause separate and independent effects on fibril nucleation and elongation. Low-molecular-weight amphipathic lipids and detergents may serve as useful, stage-specific modulators of protein self-assembly and fibril formation in disease-prevention strategies.

Studies of the growth, evolution, and self‐aggregation of β‐amyloid fibrils using tapping‐mode atomic force microscopy

Amyloid peptide (Aβ) is the major protein component of plaques found in Alzheimer's disease, and the aggregation of Aβ into oligomeric and fibrillic assemblies has been shown to be an early event of the disease pathway. Visualization of the progressive evolution of nanoscale changes in the morphology of Aβ oligomeric assemblies and amyloid fibrils has been accomplished ex situ using atomic force microscopy (AFM) in ambient conditions. In this report, the size and the shape of amyloid β(1-40) fibrils, as well as the secondary organization into aggregate structures were monitored at different intervals over a period of 5 months. Characterizations with tapping-mode AFM serve to minimize the strong adhesive forces between the probe and the sample to prevent damage or displacement of fragile fibrils. The early stages of Aβ growth showed a predominance of spherical seed structures, oligomeric assemblies, and protofibrils; however the size and density of fibrils progressively increased with time. Within a few days of incubation, linear assemblies and fibrils became apparent. Over extended time scales of up to 5 months, the fibrils formed dense ensembles spanning lengths of several microns, which exhibit interesting changes due to self-organization of the fibrils into bundles or tangles. Detailed characterization of the Aβ assembly process at the nanoscale will help elucidate the role of Aβ in the pathology of Alzheimer's disease.