Monovalent Silver Research Articles

Non-molecular monovalent metal organophosphonates and diphosphonates

The solid state chemistry of non-molecular monovalent metal organophosphonates and diphosphonates is relatively new and evolving research arena. The syntheses and structural characterization of about fifty such compounds are reported in the literature. They are a variety of mono- and di-phosphonates of inorganic monovalent cations, namely, alkali metal, thallium, cuprous, silver and mercurous ions and also ammonium ions. They have x:2 (x = 1–4) ratios of metal to phosphonate moieties and possess mostly layered and pillared-layered structures. Some of them function as solid Brönsted acids and exhibit proton conductivity.

Nicotinamide complex of silver(III) with expanded coordination number

In strongly alkaline media ([OH−] ≥ 0.12 M), nicotinamide (nica) forms a complex with square-planar Ag(OH)4− [nica] ≥ 0.05 M. The complex decomposes in seconds to nicotinamide N-oxide. The correlation of maximum absorbance of the complex with concentrations of nicotinamide and hydroxide requires that the complex is either the five-coordinate Ag(OH)4(H-1nica)2− or the six-coordinate Ag(OH)5(nica)2−. Comparison with the reactions of Ag(OH)4− with nicotinate ion (nic−) and acetamide under similar conditions indicates that nicotinamide coordinates with Ag(OH)4− by the amido group rather than the nitrogen on the pyridine ring or the amido oxygen. Kinetics of the Ag(III)-nica redox reaction are consistent with direct reaction between nicotinamide and uncoordinated Ag(OH4)−. Oxidation takes place at the pyridine ring, yielding nicotinamide N-oxide. Silver(III) is reduced to monovalent silver.

Thermodynamic studies on metal ions – Ninhydrin – Glycine interactions in aqueous solutions

The experimental protonation and complex formation equilibrium constants of ligands (ninhydrin (NHN) and glycine (Gly)) with trivalent (iron(III), aluminium(III), and chromium (III)), divalent (copper(II), cobalt(II), nickel(II), strontium(II), manganese(II), and mercury(II)) and monovalent silver(I) metal ions have been investigated at 310.15 K in water solutions at ionic strength of 13.60 g·dm−3 NaNO3 using pH-potentiometric, UV–visible spectrophotometric, and cyclic voltammetry techniques, and by means of Hyperquad 2008 estimation model program. Also, the dissociation constants of NHN and the equilibrium constants of its binary complexes and ternary complexes with the studied metal ions in 13.60 g·dm−3 NaNO3 water solutions were observed at different temperatures such as (298.15, 310.15, 318.15 and 328.15) K. The theoretical calculations of overall protonation and stability constants of the metal ion-ninhydrin complex species in aqueous solutions were predicted as the free energy change associated with the ninhydrin protonation, and metal ion – ninhydrin – glycine complex formation equilibria using ab initio and density function theory calculations by applying Gaussian 09 software molecular modelling. The convention of the experimental Potentiometry/Spectrophotometry techniques and theoretical calculations provide a complete picture of the microscopic equilibria of the studied metal ions – ninhydrin – glycine systems. Precisely, this theoretical predication could be useful to control the most real protonation constants of ninhydrin and glycine ligands in which the binding sites change due to the ligand protonation/deprotonation equilibria. Also, the complexing capacities of different metal ions towards ninhydrin and glycine in solutions were evaluated and discussed. From the determined experimental stability constants of different metal complex species, the concentration distribution diagrams of the various metal ions – ninhydrin – glycine complex species in solutions were estimated using HySS 2009 software.

Dualistic distribution coefficients of trace elements in the system mineral–hydrothermal solution. IV. Platinum and silver in pyrite

The FeS2–Ag–Pt–As system was studied using hydrothermal thermogradient synthesis (with internal sampling) of pyrite crystals at a temperature of 500°C and pressure of 1 kbar in ammonium chloridebased solutions. The modes of occurrence of precious metals (PM) were determined using atomic absorption spectrometry (AAS) in its version of statistical selections of analytical data on single crystals (SSADSC), electron microprobe analysis (EMPA), scanning electron microscopy with energy-dispersive spectrometry (SEM-EDS), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). The concentration of Pt in its structural mode in pyrite is as high as 10–11 ppm and is practically not correlated with the As concentration. The dualistic distribution coefficient of Pt between pyrite and hydrothermal solution is 21 ± 7 for the structural mode and 210 ± 80 for the surface-related mode of this element. No inclusions of either any Pt-bearing minerals or Pt itself was detected. Platinum is an element highly compatible with hydrothermal pyrite and is different in this sense from gold, and pyrite is underestimated as a potential concentrator of platinumgroup elements (PGE). The distribution of Ag in pyrite is highly heterogeneous. The likely reason for this is that the Ag solid solution cannot be quenched, and hence, the Ag concentrations broadly vary and are very unsystematically distributed in natural pyrite crystals. Assuming this hypothesis, the limit for Ag accommodation in FeS2 can be estimated using SSADSC at 0.09 ± 0.06 wt % under the experimental parameters, and the distribution coefficient of the structural Ag mode is thereby evaluated at 1400 ± 700. When crystallizing together with FeS2 proustite (Ag3AsS3) near its melting point, forms mixtures with dervillite (Ag2AsS2), in which Ag deficit is counterbalanced by excess divalent As. The limit of As incorporation into pyrite under these conditions is ≤0.1 wt %. SEM-EDS and XPS data indicate that the surface phases are of three types. In the course of crystal growth, practically two-dimensional nonautonomous phases (NP) are aggregated into submicroscopic and micrometer-sized crystalline bodies (mesocrystals) that largely inherit their unusual minor-element composition from NP and are enriched in Ag, Pt, As, and other minor elements. NP and mesocrystals are enriched in Al, which was transferred into them from the Al-bearing Ti alloy of the reaction containers. Silver occur in the volume of the crystals and on their surface as monovalent silver sulfide. Arsenic was detected mostly in the form of di- and trivalent arsenic sulfides. Pentavalent arsenic oxide was identified only on the surface of the crystals and can be easily eliminated by ion milling.

Microwave assisted green synthesis of silver nanoparticles using leaf extract of elephantopus scaber and its environmental and biological applications

The fabrication of spherical silver nanoparticles using the phytoreducing agent Elephantopus scaber is reported here. Irradiation of the reaction mixture under a domestic microwave oven enabled the formation of stable silver nanoparticles and was confirmed by UV-vis spectral portrait. Chemical components inherent in the aqueous leaf extract which reduces the monovalent silver were identified by FT-IR spectroscopy. The crystal structure of the synthesized nanoparticles was established as face centred cube by the powder XRD analysis. The TEM images suggest an average particle size of 37.86 nm to the silver nanoparticles. The prepared silver nanocatalysts can successfully reduce various organic nitro compounds, namely, 4-nitrophenol, 2-nitroaniline and 4-nitroaniline. The environmental pollution caused by dyes like eosin Y is effectively wiped off within a short span of time using the prepared nanocatalysts. The free radical quenching efficacy of the plant extract and the silver nanoparticles were checked by employing DPPH assay bestowing ascorbic acid reference. The potential of the nanoparticles as antimicrobials against six human disease causing pathogens were tested through the well diffusion pathway. The newly developed silver nanoparticles produced IC50 value 15.68 ± 0.15 μg/mL on human skin carcinoma cells, A375 and 65.49 ± 0.40 μg/mL on fibroblast cells, L929 when the cytotoxicity is studied employing MTT assay. Elephantopus scaber showed IC50 value 50.55 ± 0.17 μg/mL against A375 cells.

Silver Alginate Hydrogel Micro- and Nanocontainers for Theranostics: Synthesis, Encapsulation, Remote Release, and Detection.

We have designed multifunctional silver alginate hydrogel microcontainers referred to as loaded microcapsules with different sizes by assembling them via a template assisted approach using natural, highly porous calcium carbonate cores. Sodium alginate was immobilized into the pores of calcium carbonate particles of different sizes followed by cross-linking via addition of silver ions, which had a dual purpose: on one hand, the were used as a cross-linking agent, albeit in the monovalent form, while on the other hand they have led to formation of silver nanoparticles. Monovalent silver ions, an unusual cross-linking agent, improve the sensitivity to ultrasound, lead to homogeneous distribution of silver nanoparticles. Silver nanoparticles appeared on the shell of the alginate microcapsules in the twin-structure as determined by transmission electron microscopy. Remote release of a payload from alginate containers by ultrasound was found to strongly depend on the particle size. The possibility to use such particles as a platform for label-free molecule detection based on the surface enhanced Raman scattering was demonstrated. Cytotoxicity and cell uptake studies conducted in this work have revealed that microcontainers exhibit nonessential level of toxicity with an efficient uptake of cells. The above-described functionalities constitute building blocks of a theranostic system, where detection and remote release can be achieved with the same carrier.

Giant magneto resistance and temperature coefficient of resistance in Sm0.55Sr0.30Ag0.15MnO3 perovskite

Silver ions substituted samarium strontium manganite (Sm0.55Sr0.30Ag0.15MnO3) pervoskite was synthesized by using respective oxides in stoichiometric ratio through solid state reaction. The as-prepared sample was characterized by various analytical techniques to confirm its formation and understand the effect of monovalent silver ions in pervoskite lattice. X-ray diffraction pattern confirms the single phase formation while grain morphology in SEM image indicates good connectivity among the grains. The enhancement in metal to insulator transition temperature shows quenched disorder and magnetoresistance phenomena. The magnetoresistance (MR) and temperature coefficient of resistance (TCR) emerge from grain growth factor and homogeneity induced by Ag+ ions in the lattice. The reduction in hysteresis loss resulted from antiferromagnetic - ferromagnetic (TN) and ferromagnetic - paramagnetic (Tc) transitions reveals the removal of disorder in perovskite lattice by Ag+ ions substitution. This increases the magnetic moment across distinct ions on the applying magnetic field. The rise in MR% (~99%) with silver doping emerging from smooth spin tunneling of the grains across the boundary and suppression of the disordered magnetic fluctuations with increase in magnetic field has been reported. The present compound exhibits the first order nature of magnetism and observed first time the highest value of TCR ~ 95%.

First-Principles Study of CuGaO2 Polymorphs: Delafossite α-CuGaO2 and Wurtzite β-CuGaO2.

The electronic structures of delafossite α-CuGaO2 and wurtzite β-CuGaO2 were calculated based on density functional theory using the local density approximation functional including the Hubbard correction (LDA+U). The differences in the electronic structure and physical properties between the two polymorphs were investigated in terms of their crystal structures. Three major structural features were found to influence the electronic structure. The first feature is the atomic arrangements of cations. In the conduction band of α-CuGaO2 with a layered structure of Cu2O and Ga2O3, Cu and Ga states do not mix well; the lower part of the conduction band mainly consists of Cu 4s and 4p states, and the upper part consists of Ga 4s and 4p states. By contrast, in β-CuGaO2, which is composed of CuO4 and GaO4 tetrahedra, Cu and Ga states are well-mixed. The second feature is the coordination environment of Cu atoms; the breaking of degeneracy of Cu 3d orbitals is determined by the crystal field. Dispersion of the Cu 3d valence band of β-CuGaO2, in which Cu atoms are tetrahedrally coordinated to oxygen atoms, is smaller than those in α-CuGaO2, in which Cu atoms are linearly coordinated to oxygen atoms; this results in a larger absorption coefficient and larger hole effective mass in β-CuGaO2 than in α-CuGaO2. The interatomic distance between Cu atoms-the third feature-also influences the dispersion of the Cu 3d valence band (i.e., the effective hole mass); the effective hole mass decreases with decreasing interatomic distance between Cu atoms in each structure. The results obtained are valuable for understanding the physical properties of oxide semiconductors containing monovalent copper and silver.

Pure Cubic-Phase Hybrid Iodobismuthates AgBi2 I7 for Thin-Film Photovoltaics.

Bismuth-based hybrid perovskites are candidates for lead-free and air-stable photovoltaics, but poor surface morphologies and a high band-gap energy have previously limited these hybrid perovskites. A new materials processing strategy to produce enhanced bismuth-based thin-film photovoltaic absorbers by incorporation of monovalent silver cations into iodobismuthates is presented. Solution-processed AgBi2 I7 thin films are prepared by spin-coating silver and bismuth precursors dissolved in n-butylamine and annealing under an N2 atmosphere. X-ray diffraction analysis reveals the pure cubic structure (Fd3m) with lattice parameters of a=b=c=12.223 Å. The resultant AgBi2 I7 thin films exhibit dense and pinhole-free surface morphologies with grains ranging in size from 200-800 nm and a low band gap of 1.87 eV suitable for photovoltaic applications. Initial studies produce solar power conversion efficiencies of 1.22 % and excellent stability over at least 10 days under ambient conditions.

Pure Cubic‐Phase Hybrid Iodobismuthates AgBi2I7 for Thin‐Film Photovoltaics

AbstractBismuth‐based hybrid perovskites are candidates for lead‐free and air‐stable photovoltaics, but poor surface morphologies and a high band‐gap energy have previously limited these hybrid perovskites. A new materials processing strategy to produce enhanced bismuth‐based thin‐film photovoltaic absorbers by incorporation of monovalent silver cations into iodobismuthates is presented. Solution‐processed AgBi2I7 thin films are prepared by spin‐coating silver and bismuth precursors dissolved in n‐butylamine and annealing under an N2 atmosphere. X‐ray diffraction analysis reveals the pure cubic structure (Fd3m) with lattice parameters of a=b=c=12.223 Å. The resultant AgBi2I7 thin films exhibit dense and pinhole‐free surface morphologies with grains ranging in size from 200–800 nm and a low band gap of 1.87 eV suitable for photovoltaic applications. Initial studies produce solar power conversion efficiencies of 1.22 % and excellent stability over at least 10 days under ambient conditions.

Magnetocaloric response of submicron (LaAg)MnO3 manganite obtained by Pechini method

Lanthanum-based manganites containing monovalent silver cations and having grain sizes below 0.30 microns were synthesized via Pechini method, by using a moderate calcination temperature (900 °C). The incorporation of Ag+ ions into the perovskite crystal structure was verified by means of EDS, EELS, and XPS techniques. Monovalent cations provoked a rhombohedral deformation of the crystal structure, together with the formation of Mn3+–Mn4+ pairs yielding to a noticeable ferromagnetic behavior characterized by high saturation magnetization (47 Am2/kg) and a steep Curie transition at 308 K. This combination of magnetic properties enable an excellent magnetocaloric performance, with magnetic entropy variations of up to 5.6 J/kg K (for magnetic field ΔH = 5.0 T) and refrigerant capacities of up to 184 J/kg.

Structural Characterization of Anticancer Drug Paclitaxel and Its Metabolites Using Ion Mobility Mass Spectrometry and Tandem Mass Spectrometry.

Paclitaxel (PTX) is a popular anticancer drug used in the treatment of various types of cancers. PTX is metabolized in the human liver by cytochrome P450 to two structural isomers, 3′-p-hydroxypaclitaxel (3p-OHP) and 6α-hydroxypaclitaxel (6α-OHP). Analyzing PTX and its two metabolites, 3p-OHP and 6α-OHP, is crucial for understanding general pharmacokinetics, drug activity, and drug resistance. In this study, electrospray ionization ion mobility mass spectrometry (ESI-IM-MS) and collision induced dissociation (CID) are utilized for the identification and characterization of PTX and its metabolites. Ion mobility distributions of 3p-OHP and 6α-OHP indicate that hydroxylation of PTX at different sites yields distinct gas phase structures. Addition of monovalent alkali metal and silver metal cations enhances the distinct dissociation patterns of these structural isomers. The differences observed in the CID patterns of metalated PTX and its two metabolites are investigated further by evaluating their gas-phase structures. Density functional theory calculations suggest that the observed structural changes and dissociation pathways are the result of the interactions between the metal cation and the hydroxyl substituents in PTX metabolites.

Effect of polymer backbone chemical structure on metal ions binding by imidazolylmethyl derivatives

Sorption properties of poly(N-(5-methyl-4-imidazolyl)methylallylamine (PAA) and poly(N-(5-methyl-4-imidazolyl)methylethylenimine) (IMPEI) have been investigated and compared with those of imidazolylmethyl derivative of natural aminopolymer chitosan (IMC). We have shown that the structure of polymer backbone has a pronounced effect on sorption of both transition metal cations and noble metals by imidazolylmethyl derivatives. It was shown that sorption of Au(III) and Pt(IV) by all imidazolylmethyl derivatives is accompanied by changes in metal oxidation states. The highest content of more oxidized species – Au(III) and Pt(IV) was found in IMC, which showed the lowest sorption capacity. Efficacy of noble metals elution with HCl/thiourea solution changes in the row IMC>IMPAA>IMPEI, showing low applicability of IMPEI for recovery of gold and platinum ions in sorption/regeneration cycles despite its highest sorption capacity toward all noble metal ions.Sorption capacities toward transition metal cations change in the following row: IMPEI>IMC>IMPAA. The effect of polymer structure on sorption capacities of IMPEI, IMPAA, and IMC is much stronger for divalent cations than for monovalent silver ion. DFT calculations have shown that coordination of Ag+ ion by all derivatives occurs via formation of two Ag–N coordination bonds with N-atoms of imidazole ring and amino group of the polymer backbone, while contribution of electron–donor atoms of IMC and IMPEI backbone to coordination of divalent ions is remarkably higher.

Functional and Biochemical Characterization of Cucumber Genes Encoding Two Copper ATPases CsHMA5.1 and CsHMA5.2

Plant copper P1B-type ATPases appear to be crucial for maintaining copper homeostasis within plant cells, but until now they have been studied mostly in model plant systems. Here, we present the molecular and biochemical characterization of two cucumber copper ATPases, CsHMA5.1 and CsHMA5.2, indicating a different function for HMA5-like proteins in different plants. When expressed in yeast, CsHMA5.1 and CsHMA5.2 localize to the vacuolar membrane and are activated by monovalent copper or silver ions and cysteine, showing different affinities to Cu(+) (Km ∼1 or 0.5 μM, respectively) and similar affinity to Ag(+) (Km ∼2.5 μM). Both proteins restore the growth of yeast mutants sensitive to copper excess and silver through intracellular copper sequestration, indicating that they contribute to copper and silver detoxification. Immunoblotting with specific antibodies revealed the presence of CsHMA5.1 and CsHMA5.2 in the tonoplast of cucumber cells. Interestingly, the root-specific CsHMA5.1 was not affected by copper stress, whereas the widely expressed CsHMA5.2 was up-regulated or down-regulated in roots upon copper excess or deficiency, respectively. The copper-induced increase in tonoplast CsHMA5.2 is consistent with the increased activity of ATP-dependent copper transport into tonoplast vesicles isolated from roots of plants grown under copper excess. These data identify CsHMA5.1 and CsHMA5.2 as high affinity Cu(+) transporters and suggest that CsHMA5.2 is responsible for the increased sequestration of copper in vacuoles of cucumber root cells under copper excess.

Dental unit water treatment with hydrogen peroxide and monovalent silver ions artificially contaminated with freshly isolated pathogens.

Dental unit water (DUW) could be contaminated by human pathogens coming from biological fluids penetrated during patient treatment and by opportunistic pathogens detached from aquatic biofilm. These microorganisms could be spread to following patients. We tested the disinfectant activity of hydrogen peroxide and monovalent silver ions (H(2)O(2)-Ag(+)) into DUW artificially contaminated with freshly isolated pathogens. The tested microorganisms were Staphylococcus aureus, Enterococcus faecalis, Candida albicans, Pseudomonas aeruginosa, Legionella pneumophila, Mycobacterium chelonae, non-pathogenic Bacillus clausii spores. Bacterial suspensions were inoculated into the waterlines of pre-sterilized dental turbines. The test-turbines were connected to DUW and contaminated water was treated for 10 minutes with H(2)O(2)-Ag(+)-based disinfectant (H(2)O(2) 3% v/v, Ag(+) 0.001% w/v). The control-turbines were left untreated. Turbines were washed with sterile hard water used to assess the residual bacterial loads (expressed in colony forming units -cfu). Each strain was tested five times and the mean log loads were assessed. Following the European Standardization Committee, the disinfectant activity was evaluated as mean log load reduction, that is, the difference between the mean log load detected on the control-turbines and the mean log load detected on the test-turbines. Mean bacterial loads detected on the control-turbines ranged between 105-107 cfu. The mean log load reductions resulted 7.5 log cfu for S. aureus, E. faecalis, P. aeruginosa, 6.3 for C. albicans, 5.4 for L. pneumophila, 5.3 for M. chelonae, 2.9 for B. clausii spores. DUW disinfection with H(2)O(2)-Ag(+) could help minimize the risk that planktonic pathogens are spread to patients during dental treatment.

Silver electrodeposition on the activated carbon air cathode for performance improvement in microbial fuel cells

The present work was to study silver electrodeposition on the activated carbon (AC) air cathode for performance improvement in microbial fuel cells (MFCs). The treated cathodes were proved to be effective to enhance the performance of MFCs. The maximum power density of MFC with silver electrodeposition time of 50 s (Ag-50) cathode was 1080 ± 60 mW m−2, 69% higher than the bare AC air cathode. X-ray photoelectron spectroscopy (XPS) results showed that zero-valent, monovalent and divalent silver were present to transform mutually, which illustrated that the oxygen reduction reaction (ORR) at the cathode took place through four-electron pathway. From electrochemical impedance spectroscopy (EIS) analysis, the electrodeposition method made the total resistance of the electrodes largely reduced. Meanwhile the deposited silver had no toxic effects on anode culture but inhibited the biofilm growth of the cathodes. This kind of antimicrobial efficient cathode, prepared with a simple, fast and economical method, was of good benefit to the performance improvement of MFCs.

Localized, Stepwise Template Growth of Functional Nanowires from an Amino Acid-Supported Framework in a Microfluidic Chip

A spatially controlled synthesis of nanowire bundles of the functional crystalline coordination polymer (CP) Ag(I)TCNQ (tetracyanoquinodimethane) from previously fabricated and trapped monovalent silver CP (Ag(I)Cys (cysteine)) using a room-temperature microfluidic-assisted templated growth method is demonstrated. The incorporation of microengineered pneumatic clamps in a two-layer polydimethylsiloxane-based (PDMS) microfluidic platform was used. Apart from guiding the formation of the Ag(I)Cys coordination polymer, this microfluidic approach enables a local trapping of the in situ synthesized structures with a simple pneumatic clamp actuation. This method not only enables continuous and multiple chemical events to be conducted upon the trapped structures, but the excellent fluid handling ensures a precise chemical activation of the amino acid-supported framework in a position controlled by interface and clamp location that leads to a site-specific growth of Ag(I)TCNQ nanowire bundles. The synthesis is conducted stepwise starting with Ag(I)Cys CPs, going through silver metal, and back to a functional CP (Ag(I)TCNQ); that is, a novel microfluidic controlled ligand exchange (CP → NP → CP) is presented. Additionally, the pneumatic clamps can be employed further to integrate the conductive Ag(I)TCNQ nanowire bundles onto electrode arrays located on a surface, hence facilitating the construction of the final functional interfaced systems from solution specifically with no need for postassembly manipulation. This localized self-supported growth of functional matter from an amino acid-based CP shows how sequential localized chemistry in a fluid cell can be used to integrate molecular systems onto device platforms using a chip incorporating microengineered pneumatic tools. The control of clamp pressure and in parallel the variation of relative flow rates of source solutions permit deposition of materials at different locations on a chip that could be useful for device array preparation. The in situ reaction and washing procedures make this approach a powerful one for the fabrication of multicomponent complex nanomaterials using a soft bottom-up approach.

Synthesis of Pyridine-Based 1,3,4-Oxadiazole Derivative as Fluorescence Turn-On Sensor for High Selectivity of Ag+

An oxadiazole derivative(OXD) containing symmetrical pyridine-2-formamidophenyl-binded moiety was synthesised as fluorescence turn-on sensor OA1. Its ultraviolet-visible(UV-vis) and fluorescent spectra(FS) gave prominent fluorescence enhancement only for monovalent silver ion(Ag(+)) in HEPES buffer solution (10mM, pH = 7.0, DMF-H2O, 9:1, v/v), which indicated the photo-induced electron transfer(PET) occurred from the donor of pyridine-2-formamidophenyl group to oxadiazole fluorophore. The present study demonstrated that OA1 was a viable candidate as fluorescent receptor for a new Ag(+) sensor. And the results of fluorescent spectral titration showed this sensor formed 1:1 complex with Ag(+).

Neutralization by metal ions of the toxicity of sodium selenide.

Inert metal-selenide colloids are found in animals. They are believed to afford cross-protection against the toxicities of both metals and selenocompounds. Here, the toxicities of metal salt and sodium selenide mixtures were systematically studied using the death rate of Saccharomyces cerevisiae cells as an indicator. In parallel, the abilities of these mixtures to produce colloids were assessed. Studied metal cations could be classified in three groups: (i) metal ions that protect cells against selenium toxicity and form insoluble colloids with selenide (Ag+, Cd2+, Cu2+, Hg2+, Pb2+ and Zn2+), (ii) metal ions which protect cells by producing insoluble metal-selenide complexes and by catalyzing hydrogen selenide oxidation in the presence of dioxygen (Co2+ and Ni2+) and, finally, (iii) metal ions which do not afford protection and do not interact (Ca2+, Mg2+, Mn2+) or weakly interact (Fe2+) with selenide under the assayed conditions. When occurring, the insoluble complexes formed from divalent metal ions and selenide contained equimolar amounts of metal and selenium atoms. With the monovalent silver ion, the complex contained two silver atoms per selenium atom. Next, because selenides are compounds prone to oxidation, the stabilities of the above colloids were evaluated under oxidizing conditions. 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB), the reduction of which can be optically followed, was used to promote selenide oxidation. Complexes with cadmium, copper, lead, mercury or silver resisted dissolution by DTNB treatment over several hours. With nickel and cobalt, partial oxidation by DTNB occurred. On the other hand, when starting from ZnSe or FeSe complexes, full decompositions were obtained within a few tens of minutes. The above properties possibly explain why ZnSe and FeSe nanoparticles were not detected in animals exposed to selenocompounds.

Cysteine-Induced Modifications of Zero-valent Silver Nanomaterials: Implications for Particle Surface Chemistry, Aggregation, Dissolution, and Silver Speciation

The persistence of silver nanoparticles in aquatic environments and their subsequent impact on organisms depends on key transformation processes, which include aggregation, dissolution, and surface modifications by metal-complexing ligands. Here, we studied how cysteine, an amino acid representative of thiol ligands that bind monovalent silver, can alter the surface chemistry, aggregation, and dissolution of zero-valent silver nanoparticles. We compared nanoparticles synthesized with two coatings, citrate and polyvinylpirrolidone (PVP), and prepared nanoparticle suspensions (approximately 8 μM total Ag) containing an excess of cysteine (400 μM). Within 48 h, up to 47% of the silver had dissolved, as indicated by filtration of the samples with a 0.025-μm filter. Initial dissolution rates were calculated from the increase of dissolved silver concentration when particles were exposed to cysteine and normalized to the available surface area of nanoparticles in solution. In general, the rates of dissolution were almost 3 times faster for citrate-coated nanoparticles relative to PVP-coated nanoparticles. Rates tended to be slower in solutions with higher ionic strength in which the nanoparticles were aggregating. X-ray absorption spectroscopy analysis of the particles suggested that cysteine adsorbed to silver nanoparticles surfaces through the formation of Ag(+I)--sulfhydryl bonds. Overall, the results of this study highlight the importance of modifications by sulfhydryl-containing ligands that can drastically influence the long-term reactivity of silver nanoparticles in the aquatic environment and their bioavailability to exposed organisms. Our findings demonstrate the need to consider multiple interlinked transformation processes when assessing the bioavailability, environmental risks, and safety of nanoparticles, particularly in the presence of metal-binding ligands.