Molecular Motion Research Articles

Oil Detachment Mechanism in Natural Surfactant Flooding from Silica Surface: Molecular Dynamics Simulation

Summary International regulations have compelled Europe and the United States to phase out certain traditional surfactants to mitigate the use of toxic and nonbiodegradable chemicals. Sodium cocoyl propionate (SCA), as a natural surfactant with high performance, has been proved to have the potential to replace traditional surfactants in previous studies. However, its performance has not fully met practical application requirements. Therefore, in this paper, molecular dynamics (MD) simulation was used to study the detachment behavior and mechanism of SCA, lauryl dimethylamine oxide (OA-12), emulsifier OP-10, and SOO (combination of SCA, OA-12, and OP-10) on crude oil (dodecane, C12) at different temperatures (80–120°C) and salinities (20 000–200 000 mg/L). The complex interaction mechanism between surfactant molecules and C12 molecules was revealed by analyzing the simulated snapshot, radial distribution function (RDF), mean square displacement (MSD), and interaction energy. The simulated snapshot captures the conformational evolution of surfactant molecules at different time points, emphasizing the spatiotemporal and spatial changes of their dynamic behavior. A comparison of two desorption modes reveals that dispersive adsorption displacement and concentrated adsorption displacement are two possible desorption mechanisms. RDF analysis shows that the probability of SOO molecules near C12 remains high even at high-salinity and -temperature conditions. MSD analysis showed that the diffusion capacity of SOO was the highest at 100°C, reaching 1.52867×10 –5 cm2/ps. The calculation of interaction energy results reveals that SOO has a strong adsorption capacity for C12, which is mainly due to the effect of van der Waals (vdW) force. This is because the C12 molecules are inert, and their molecular movement is mainly determined by the polar groups of the surfactant. The main contribution of this study is to provide a natural surfactant with superior performance as a viable alternative, offering experimental settings for further improvement in SCA performance. This research provides theoretical guidance for on-site applications of SCA and SOO to enhance oil recovery.

Effect of Interfacial Modification on the Low-Temperature Fatigue Properties of Polymer/MXene Flexible Pressure Sensors.

Maintaining an excellent force-electric response under cyclic bending at low temperatures is still challenging for resistive-type electrically conductive polymer composite-based pressure sensors. In this study, the effect of low temperature on the fatigue failure of flexible MXene/polymer pressure sensors was systematically investigated through the silane functionalization of MXene nanosheets embedded with different polymer matrixes. The results show that the MXene/polymer interfaces are the primary factors affecting the temperature-dependent bending fatigue of the Cu/MXene/polymer/Cu sensor. Using finite element analysis and theoretical calculations, we reveal that the MXene/polymer interfaces are affected by free volume changes and the molecular chain motion under different temperatures. At room temperature, the well-distributed free volume in the polydimethylsiloxane (PDMS) matrix permits local segmental mobility that promotes the affinity between the polymer and MXene. As the temperature decreases, the free volume in the matrix shrinks with less space left for molecular chains to slide relatively, weakening the polymer/MXene interfacial bonding strength. However, for PDMS/MXene sensors with the interface modified using the silane coupling agent KH550, the nanoconstrained structure formed by strong hydrogen bonds and covalent bonds at the PDMS/MXene interface can hinder the mobility of polymer chains, which greatly helps to dissipate the inter/intrachain friction. It thus alleviates the debonding energy dissipation during cyclic bending at subzero temperatures.

Chemical oscillation in ultracold chemistry

We demonstrate the occurrence of oscillatory reactions in the ultra-cold chemistry of atom-molecular Bose-Einstein condensate. Nonlinear oscillations in the mean-field dynamics occur for a specific range of elliptic modulus, giving rise to both in- and out-phase modulations in the atom-molecule population density. The reaction front velocity is found to be controlled by photoassociation, which also regulates the condensate density. Two distinct pairs of in-phase bright localized gap solitons are found as exact solutions, the existence of one of which necessarily requires a background. Cnoidal atomic density waves along with a plane-wave molecular motion are observed in both attractive and repulsive domains. The role of intra- and inter-species interactions on both existence and stability is explicated in the presence of photoassociation.

Improving the substrate binding of acetyl-CoA carboxylase (AccB) from Streptomyces antibioticus through computational enzyme engineering.

Malonyl-CoA serves as the main building block for the biosynthesis of many important polyketides, as well as fatty acid-derived compounds, such as biofuel. Escherichia coli, Corynebacterium gultamicum, and Saccharomyces cerevisiae have recently been engineered for the biosynthesis of such compounds. However, the developed processes and strains often have insufficient productivity. In the current study, we used enzyme-engineering approach to improve the binding of acetyl-CoA with ACC. We generated different mutations, and the impact was calculated, which reported that three mutations, that is, S343A, T347W, and S350W, significantly improve the substrate binding. Molecular docking investigation revealed an altered binding network compared to the wild type. In mutants, additional interactions stabilize the binding of the inner tail of acetyl-CoA. Using molecular simulation, the stability, compactness, hydrogen bonding, and protein motions were estimated, revealing different dynamic properties owned by the mutants only but not by the wild type. The findings were further validated by using the binding-free energy (BFE) method, which revealed these mutations as favorable substitutions. The total BFE was reported to be -52.66±0.11kcal/mol for the wild type, -55.87±0.16kcal/mol for the S343A mutant, -60.52±0.25kcal/mol for T347W mutant, and -59.64±0.25kcal/mol for the S350W mutant. This shows that the binding of the substrate is increased due to the induced mutations and strongly corroborates with the docking results. In sum, this study provides information regarding the essential hotspot residues for the substrate binding and can be used for application in industrial processes.

The effect of boron carbide doping content on the mechanical properties of polyethylene

ABSTRACT This paper presents Martin Buber‘s unpublished manuscript ‘Fragen und Antworten. Die jüdische Besiedlung Palästinas’ in the original German with English translation and contextualizes it within the main stations of Buber‘s Zionist thinking: cultural Zionism, religious Zionism, and Zionism of realization. It problematizes Buber‘s reflection on Jewish settlements in Palestine with reference to the significance of Zionism for humanity as well as the possibility of reconciliation between Jews and Arabs in the Middle East. It also addresses the problem of Jewish terror, framing it in correlation with the restrictions on Jewish migration to Palestine and the catastrophe of the Shoah.

Effects of Polybutylene Succinate Content on the Rheological Properties of Polylactic Acid/Polybutylene Succinate Blends and the Characteristics of Their Fibers.

Polylactic acid (PLA) and polybutylene succinate (PBS) are gaining prominence as environmentally friendly alternatives to petroleum-based polymers due to their inherent biodegradability. For their textile applications, this research is focused on exploring the effects of PBS content on the rheological properties of PLA/PBS blends and the characteristics of PLA/PBS blend fibers. PLA/PBS blends and fibers with varying PBS contents (0 to 10 wt.%) were prepared using melt-blending and spinning methods. Uniform morphologies of the PLA/PBS blends indicated that PBS was compatible with PLA, except at 10% PBS content, where phase separation occurred. The introduction of PBS reduced the complex viscosity of the blends, influencing fiber properties. Notably, PLA/PBS fibers with 7% PBS exhibited improved crystallinity, orientation factor, and elasticity (~16.58%), with a similar tensile strength to PLA fiber (~3.58 MPa). The results suggest that an optimal amount of PBS enhances alignment along the drawing direction and improves the molecular motion in PLA/PBS blend fiber. This study highlights the potential of strategically blending PBS to improve PLA fiber characteristics, promising advancement in textile applications.

Massive Molecular Motion in Crystal Leads to an Unexpected Helical Covalent Polymer in a Solid-state Polymerization.

We designed a proline-derived monomer with azide and alkene functional groups to enable topochemical ene-azide cycloaddition (TEAC) polymerization. In its crystal, the monomer forms supramolecular helices along the 'a' axis through various non-covalent interactions. Along the 'c' axis, the molecules arrange themselves head-to-tail in a wave-like pattern, positioning the azide and alkene groups of adjacent molecules in close proximity and anti-parallel orientation, complying with Schmidt's criteria for topochemical reaction. This prearranged configuration was expected to facilitate smooth topochemical polymerization, resulting in a 1,4-triazoline-linked polymer. Upon heating, the monomer underwent TEAC polymerization in a remarkable single-crystal-to-single-crystal fashion, but, to our surprise, it yielded an unexpected covalent helical polymer linked by 1,5-disubstituted triazoline units. Remarkably, the crystal avoids the ready-to-react arrangement for polymerization, but connects monomer molecules within the supramolecular helix through the cycloaddition of azide and alkene groups, even though they are not in close proximity nor in the expected orientation. This unexpected path, involving a substantial 134° rotation of the alkene group, yields hitherto unknown 1,5-disubstituted triazoline product regiospecifically. This study serves as a cautionary reminder that relying solely on topochemical postulates for predicting reactivity can sometimes be misleading.

Attosecond Probing of Nuclear Vibrations in the D2+ and HeH+ Molecular Ions.

We study the ultrafast photodissociation of small diatomic molecules using attosecond laser pulses of moderate intensity in the (extreme) ultraviolet regime. The simultaneous application of subfemtosecond laser pulses with different photon energies─resonant in the region of the molecular motion─allows one to monitor the vibrational dynamics of simple diatomics, like the D2+ and HeH+ molecular ions. In our real-time wave packet simulations, the nuclear dynamics is initiated either by sudden ionization (D2+) or by explicit pump pulses (HeH+) via distortion of the potential energy of the molecule. The application of time-delayed attosecond pulses leads to the breakup of the molecules, and the information on the underlying bound-state dynamics is imprinted in the kinetic energy release (KER) spectra of the outgoing fragments. We show that the KER-delay spectrograms generated in our ultrafast pump-probe schemes are able to reconstruct the most important features of the molecular motion within a given electronic state, such as the time period or amplitude of oscillations, interference patterns, or the revival and splitting of the nuclear wave packet. The impact of probe pulse duration, which is key to the applicability of the presented mapping scheme, is investigated in detail.

Massive Molecular Motion in Crystal Leads to an Unexpected Helical Covalent Polymer in a Solid‐state Polymerization

AbstractWe designed a proline‐derived monomer with azide and alkene functional groups to enable topochemical ene‐azide cycloaddition (TEAC) polymerization. In its crystal, the monomer forms supramolecular helices along the ‘a’ axis through various non‐covalent interactions. Along the ‘c’ axis, the molecules arrange themselves head‐to‐tail in a wave‐like pattern, positioning the azide and alkene groups of adjacent molecules in close proximity and anti‐parallel orientation, complying with Schmidt's criteria for topochemical reaction. This prearranged configuration was expected to facilitate smooth topochemical polymerization, resulting in a 1,4‐triazoline‐linked polymer. Upon heating, the monomer underwent TEAC polymerization in a remarkable single‐crystal‐to‐single‐crystal fashion, but, to our surprise, it yielded an unexpected covalent helical polymer linked by 1,5‐disubstituted triazoline units. Remarkably, the crystal avoids the ready‐to‐react arrangement for polymerization, but connects monomer molecules within the supramolecular helix through the cycloaddition of azide and alkene groups, even though they are not in close proximity nor in the expected orientation. This unexpected path, involving a substantial 134° rotation of the alkene group, yields hitherto unknown 1,5‐disubstituted triazoline product regiospecifically. This study serves as a cautionary reminder that relying solely on topochemical postulates for predicting reactivity can sometimes be misleading.

Impact of Isotopic Exchange on Hydrated Protein Dynamics Revealed by Polarized Neutron Scattering

Within the last decades, it was often assumed that in hydrogen-rich disordered samples, such as proteins in solution or hydrated powder form, incoherent neutron scattering from hydrogen nuclei dominated the scattering signal to an extent that allowed all other contributions to be neglected. As incoherent scattering arises solely from self-correlations, it further justified such a choice. Consequently, heavy water was often used as a contrast tool to highlight molecular motions in live samples. Coherent scattering, which implies the scattering from many nuclei and therefore collective processes, is another non-negligible contribution to neutron scattering where cross sections of other nuclei than hydrogen are significant. The recent advent of instrumentation based on polarization of neutron beams and the analysis of their polarization state after scattering for dynamical studies allows us to separate and shed light on the two contributions. In the present study we reveal that, unexpectedly, the isotopic exchange of water in the hydration shell of proteins arises on a much faster timescale than assumed so far. Moreover, the collective and local D-bond network relaxation of hydration water contributes to a high extent to the coherent scattering signal, at odds with usual “static” approaches used to estimate the relative impacts of dynamics in the sample. Hence, hydration water necessarily contaminates nonpolarized standard experiments. The findings are of paramount importance for all neutron scattering experiments where partial or full deuteration is used. Published by the American Physical Society 2024

Multiple relaxation dynamics under electric field enables tunable viscoelastic response of poly(methyl methacrylate) above glass transition temperature.

Optimizing mechanical performance is crucial for the practical utilization of stimuli-responsive polymers, while complex viscous and elastic behavior hinders a deep understanding of functional polymers under external field excitation. Here, we demonstrate the in situ dynamic and static mechanical responses under electric stimuli of poly(methyl methacrylate) (PMMA) above glass transition temperature (Tg) by applying a direct current electric field vertically to the mechanical loading. The results show that the electro-mechanical response of PMMA is directly correlated to chain relaxation modes with different length scales: for local segments, polarization provides resistance for molecular motion, manifested by enhanced moduli, increased transient viscosity, and a wider linear viscoelastic range, whereas in a larger spatial range, polarization-induced conformation change causes faster relaxation, reduced elastic modulus, and a lowered modulus plateau. Moreover, flow viscosity is reduced because of weaker friction between chain segments under polarization. Our results suggest effective strategies for precisely tuning the viscoelastic behavior of polymers above Tg through electric stimuli.

Comparison of triple quantum (TQ) TPPI and inversion recovery TQ TPPI pulse sequences at 9.4 and 21.1 T.

Both sodium T1 triple quantum (TQ) signal and T1 relaxation pathways have a unique sensitivity to the sodium molecular environment. In this study an inversion recovery time proportional phase increment (IRTQTPPI) pulse sequence was investigated for simultaneous and reliable quantification of sodium TQ signal and bi-exponential T1 relaxation times. The IRTQTPPI sequence combines inversion recovery TQ filtering and time proportional phase increment. The reliable and reproducible results were achieved by the pulse sequence optimized in three ways: (1) optimization of the nonlinear fit for the determination of both T1-TQ signal and T1 relaxation times; (2) suppression of unwanted signals by assessment of four different phase cycles; (3) nonlinear sampling during evolution time for optimal scan time without any compromises in fit accuracy. The relaxation times T1 and T2 and the TQ signals from IRTQTPPI and TQTPPI were compared between 9.4 and 21.1 T. The motional environment of the sodium nuclei was evaluated by calculation of correlation times and nuclear quadrupole interaction strengths. Reliable measurements of the T1-TQ signals and T1 bi-exponential relaxation times were demonstrated. The fit parameters for all four phase cycles were in good agreement with one another, with a negligible influence of unwanted signals. The agar samples yielded normalized T1-TQ signals from 3% to 16% relative to single quantum (SQ) signals at magnetic fields of both 9.4 and 21.1 T. In comparison, the normalized T2-TQ signal was in the range 15%-35%. The TQ/SQ signal ratio was decreased at 21.1 T as compared with 9.4 T for both T1 and T2 relaxation pathways. The bi-exponential T1 relaxation time separation ranged from 15 to 18 ms at 9.4 T and 15 to 21 ms at 21.1 T. The T2 relaxation time separation was larger, ranging from 28 to 35 ms at 9.4 T and 37 to 40 ms at 21.1 T. The IRTQTPPI sequence, while providing a less intensive TQ signal than TQTPPI, allows a simultaneous and reliable quantification of both the T1-TQ signal and T1 relaxation times. The unique sensitivities of the T1 and T2 relaxation pathways to different types of molecular motion provide a deeper understanding of the sodium MR environment.

Lysophosphatidic acid responsive photosensitive supramolecular organic frameworks for tumor imaging, drug loading, and photodynamic therapy

Supramolecular organic frameworks have been widely applied for biological detection and drug delivery. In this study, a supramolecular organic framework (SOF) is constructed through the self-assembly of a highly photosensitive triarylphosphine oxide guest molecule, OTPP-6-Methyl, with cucurbit [8] uril (CB [8]). The formation of the SOF gradually enhances the weak fluorescence of OTPP-6-Methyl owing to the restriction of the molecular folding motion. Although the high positive charge of OTPP-6-Methyl facilitates binding to various negatively charged substances, the SOF system only demonstrated an obvious fluorescence response to LPA, a biomarker of ovarian cancer, via the disassembly of SOF and subsequent binding of OTPP-6-Methyl with LPA. The fluorescence changes during the entire process are insufficient to allow the sensitive detection of LPA; thus, we further designed a FRET system by introducing Cy5, which can act as an energy receptor to achieve a ratiometric readout for LPA. The tumor-targeting cRGD group was introduced into the SOF system as part of another guest molecule, OTPP-5-M−1−cRGD, to improve the tumor-targeting ability of the SOF system. The SOF system further improves the photosensitivity of guest molecules, and is therefore used in the in vivo imaging of ovarian cancer subcutaneous tumors and as a DDS for loading DOX for the combined in vivo chemotherapy and photodynamic treatment of tumors.

Group contribution method for rapid estimation of crystal growth rates

The morphological evolution of organic crystals during crystallization depends on the face-specific growth rates. Classical growth rate models relate the face-specific growth rates to the crystal lattice, energy of stable facets, growth mechanism, and supersaturation. The complexities of these models have increased over time to account accurately for solution conditions, the structure of growth units, and their attachment rates. Such advanced growth rate models require several layers of computations to obtain attachment energies of facets, nucleation rates, kink density, and attachment rates. Among these, the most intensive and time-consuming computation is for attachment rates, which require molecular dynamic simulations. This substantially increases the overall computation time to predict the absolute growth rate for even one crystallization condition. Since it is nearly impossible to iterate such a growth rate model, optimization schemes cannot be implemented to identify solution conditions that favor specific crystal growth. To reduce the computational time for attachment rate calculations, we implement a group contribution method (GCM) that relates the properties of functional groups in a molecule to their attachment rates to the crystal lattice, thereby rapidly estimating the growth rates of organic crystals. The process of molecular attachment involves partial desolvation of a solvated molecule, referred to as a transition state, followed by total desolvation via spontaneous attachment to a crystal facet. The first step in GCM is to identify the equilibrium states of fully solvated and partially desolvated solute molecules. The degree of supersaturation dictates the extent of this equilibrium and, thereby, the activation barrier for the growth of crystals, according to transition state theory. Identifying this equilibrium phenomenon allows for capturing the functional-group-specific interactions that depend on molecular motion, which could be related to operating conditions such as temperature and pressure. The stochastic optimization technique with Monte-Carlo sampling allows an efficient optimization problem solution to obtain the group interaction parameters. The GCM approach is first validated for the estimation of growth rates of glutamic acid and L-histidine, and then extended to predict growth rates of alanine and glycine rapidly. The optimized parameters and GCM scheme can be used to estimate growth rates in other crystallization systems.

Boosting Circularly Polarized Luminescence from Alkyl-Locked Axial Chirality Scaffold by Restriction of Molecular Motions.

Boosting the circularly polarized luminescence of small organic molecules has been a stubborn challenge because of weak structure rigidity and dynamic molecular motions. To investigate and eliminate these factors, here, we carried out the structure-property relationship studies on a newly-developed axial chiral scaffold of bidibenzo[b,d]furan. The molecular rigidity was finely tuned by gradually reducing the alkyl-chain length. The environmental factors were considered in solution, crystal, and polymer matrix at different temperatures. As a result, a significant amplification of the dissymmetry factor glum from 10-4 to 10-1 was achieved, corresponding to the situation from (R)-4C in solution to (R)-1C in polymer film at room temperature. A synergistic strategy of increasing the intramolecular rigidity and enhancing the intermolecular interaction to restrict the molecular motions was thus proposed to improve circularly polarized luminescence. The though-out demonstrated relationship will be of great importance for the development of high-performance small organic chiroptical systems in the future.

On selection rules in two-dimensional terahertz-infrared-visible spectroscopy.

Two-dimensional terahertz-infrared-visible (2D TIRV) spectroscopy directly measures the coupling between quantum high-frequency vibrations and classical low-frequency modes of molecular motion. In addition to coupling strength, the signal intensity in 2D TIRV spectroscopy can also depend on the selection rules of the excited transitions. Here, we explore the selection rules in 2D TIRV spectroscopy by studying the coupling between the high-frequency CH3 stretching and low-frequency vibrations of liquid dimethyl sulfoxide (DMSO). Different excitation pathways are addressed using variations in laser pulse timing and different polarizations of exciting pulses and detected signals. The DMSO signals generated via different excitation pathways can be readily distinguished in the spectrum. The intensities of different excitation pathways vary unequally with changes in polarization. We explain how this difference stems from the intensities of polarized and depolarized Raman and hyper-Raman spectra of high-frequency modes. These results apply to various systems and will help design and interpret new 2D TIRV spectroscopy experiments.

Pressure-induced luminescence evolution of 3,3′-diamino-4,4′-azofurazan: Role of restricting chemical bond vibration and conformational modification

The luminescence and electronic structure of 3,3′-Diamino-4,4′-azofurazan (DAAzF) were studied under high pressure conditions through experimental and calculation approaches. The transition of π* → π was primarily responsible for DAAzF's broad light emission. Upon applying pressure to DAAzF, high-pressure-stiffened hydrogen-bond interactions enable the restriction of the stretching vibration of NH2 group. The reduced energy loss through nonradiative rotational relaxation and molecular motions lead to a ∼20 times luminescent enhancement of DAAzF from 1 atm to 8.9 GPa. With the further strengthening of interlayer hydrogen bond interactions at higher pressure, the deviation of hydrogen atoms in amino groups from the molecular plane lessens the radiation transition efficiency. In addition, the bending of the C–C–N=N bond further leads to molecular conformation changes at approximately 20.7 GPa, which induces an abrupt redshift and moderate quenching of the luminescence. Furthermore, the band gap of DAAzF is significantly influenced by pressure. As the color undergoes a transition from yellow to red, and becomes darker as the pressure increases, the absorption edge shifted towards red. At 3.4, 9, and 21 GPa, three conformational variations were identified in conjunction with electronic structural alterations.

Revealing the behavior and mechanism of surfactant-assisted liquid permeability in Poplar wood

Wood is a sustainable and porous resource that can be utilized to fabricate advanced functional materials. However, the low permeability of liquids within wood poses a challenge to widespread adoption and implementation of technology for producing wood-based functional materials. Surfactants are capable of reducing surface tension of liquids, thus holding promise for enhancing liquid permeability in wood. The effect of four surfactants (JFC-U, Tween 80, OP-10, DDAC) on liquid absorption of copper ethanolamine (CE) in wood was investigated under room temperature and pressure. Surfactants effectively increased liquid absorption of wood up to 2.3 times and weight percent gain by up to 5.8 times compared with that of CE control. The improvement effect of surfactants resulted from three aspects: significantly improved liquid wetting on wood surface, enhanced penetration of liquid in cell lumen, and promoted molecular movement within cell wall. Their contributions varied with the structure of surfactants. Surfactants with linear structure showing significantly reduced surface tension, and cationic surfactants exhibiting high adsorption capacity on wood surface both demonstrated superior efficacy in increasing liquid permeability. This study explored the mechanisms by which surfactants affect liquid permeability within wood, while also provided guidance to select effective surfactants to assist wood impregnation.

Investigation on chain segment motions of various starch molecules under different glycerol-water system

The molecular motion of starch at different glycerol concentrations (0, 20, 50, and 80 %) was investigated using Electron Paramagnetic Resonance (EPR) spectroscopy. Fourier-transform infrared (FTIR) spectroscopy and 1H nuclear magnetic resonance (1H NMR) spectroscopy confirmed that hydroxyl groups at the C2 and C3 positions of glucose units in corn starch (CS), waxy corn starch (WCS), and high amylose corn starch (HCS) were labeled with 4-amino-TEMPO. The crystallinities of CS, WCS, and HCS after spin-labeling decreased from 30.68 % to 3.21 %, 39.36 % to 1.65 %, and 28.54 % to 8.08 %, respectively. The pseudoplastic fluid properties of the spin-labeled starch remained shear-thin at different glycerol concentrations. EPR revealed the fast- and slow-motion components of the spin-labeled starch molecules dispersed in water. At a glycerol concentration of 20 %, the slow-motion component disappeared, indicating a faster rotational motion of the starch chain segments. As the glycerol concentration increased to 50 and 80 %, the rotational motion slowed because of high viscosity. In particular, the mobility of the spin-labeled WCS chains increased owing to easier access of glycerol and water to the branched structure. This study directly observed the dynamics of the molecular behavior of starch in glycerol-water systems.

Room-temperature quantum coherence of entangled multiexcitons in a metal-organic framework.

Singlet fission can generate an exchange-coupled quintet triplet pair state 5TT, which could lead to the realization of quantum computing and quantum sensing using entangled multiple qubits even at room temperature. However, the observation of the quantum coherence of 5TT has been limited to cryogenic temperatures, and the fundamental question is what kind of material design will enable its room-temperature quantum coherence. Here, we show that the quantum coherence of singlet fission-derived 5TT in a chromophore-integrated metal-organic framework can be over hundred nanoseconds at room temperature. The suppressed motion of the chromophores in ordered domains within the metal-organic framework leads to the enough fluctuation of the exchange interaction necessary for 5TT generation but, at the same time, does not cause severe 5TT decoherence. Furthermore, the phase and amplitude of quantum beating depend on the molecular motion, opening the way to room-temperature molecular quantum computing based on multiple quantum gate control.