Moderate Resolution Imaging Spectroradiometer Leaf Area Index Product Research Articles

Retrieval of the Leaf Area Index from Visible Infrared Imaging Radiometer Suite (VIIRS) Surface Reflectance Based on Unsupervised Domain Adaptation

Several global leaf area index (LAI) products were generated using neural networks, but the training dataset for the neural networks was sensor specific, and the construction of the training dataset was time consuming. In this paper, an unsupervised domain adaptation-based method was proposed to estimate LAI from the Visible Infrared Imaging Radiometer Suite (VIIRS) surface reflectance dataset based on a training dataset constructed from the Moderate Resolution Imaging Spectroradiometer (MODIS) surface reflectance dataset. A transfer component analysis (TCA) algorithm was first utilized to map the MODIS and VIIRS surface reflectance into the same subspace to reduce the distribution discrepancies between the MODIS and VIIRS surface reflectance. Then, the embedded data obtained from MODIS surface reflectance dataset, along with the LAI values produced by fusing the MODIS and the Carbon cYcle and Change in Land Observational Products from an Ensemble of Satellites (CYCLOPES) products, were employed to train general regression neural networks (GRNNs). Finally, for retrieving the LAI values, the embedded data acquired from the VIIRS surface reflectance dataset was input into the trained GRNNs. For multiple field sites with different biome types, we used this developed method to retrieve LAI values based on the VIIRS surface reflectance dataset. The results indicate that, based on the training dataset built from MODIS surface reflectance dataset, the domain adaptation-based retrieval method can effectively estimate LAI values from VIIRS surface reflectance dataset. By comparison with the VIIRS and MODIS LAI products, the retrieved LAI values with TCA are more consistent with the reference LAI values acquired from high-resolution remote sensing images. The coefficient of determination (R2) and root mean square error (RMSE) of the retrieved LAI values with TCA at all selected sites are 0.88 and 0.68, respectively. Furthermore, the accuracy of the retrieved LAI values with TCA is higher than the retrieved LAI values without TCA with the R2 0.81 and the RMSE 0.79.

A 250 m resolution global leaf area index product derived from MODIS surface reflectance data

ABSTRACT There are several global leaf area index (LAI) products currently available. The spatial resolution of these products is 500 m and above, which is unsuitable for many applications requiring higher spatial resolution. In the past several years, we developed a method to estimate the LAI from time series satellite remote sensing data using general regression neural networks. The method has been used to generate global LAI products at 500 m and 1000 m from Moderate Resolution Imaging Spectroradiometer (MODIS) surface reflectance data, and a global LAI product at 0.05° from Advanced Very High Resolution Radiometer (AVHRR) surface reflectance data. In this study, the method was extended to generate a global LAI product at 250 m (one of the MUltiscale Satellite remotE Sensing (MUSES) product suite) from MODIS surface reflectance data in the red and near-infrared (NIR) bands. As far as we know, it is the first global LAI product at 250 m spatial resolution and is the highest spatial resolution global LAI product available. The spatial and temporal consistency of the MUSES LAI product was evaluated by comparing it with the MODIS LAI product, and the MUSES LAI product was validated by high-resolution reference maps at the Validation of Land European Remote Sensing Instruments (VALERI) and Implementing Multi-Scale Agricultural Indicators Exploiting Sentinels (IMAGINES) sites representative of different biomes. The root mean square error (RMSE) of the MUSES LAI product versus the LAI values derived from the high-resolution reference maps over the VALERI and IMAGINES sites was 0.9984, and the bias of the MUSES LAI product was −0.2005.

Evaluation of the version 5.0 global land surface satellite (GLASS) leaf area index product derived from MODIS data

ABSTRACT The Global Land Surface Satellite (GLASS) leaf area index (LAI) product is one of the most widely used global LAI products in the scientific community. The latest (version 5) GLASS LAI product has been generated from Moderate Resolution Imaging Spectroradiometer (MODIS) surface reflectance data. The purpose of this paper is to evaluate the quality of the version 5 GLASS LAI product. The GLASS LAI product was compared with the latest MODIS LAI product (MCD15A2 H, Collection 6) and the second version of Geoland2 (GEOV2) LAI product to evaluate their temporal and spatial discrepancies. A direct validation was conducted to compare these LAI products to the LAI values derived from the high-resolution reference maps from the Validation of Land European Remote Sensing Instruments (VALERI) and Implementing Multi-Scale Agricultural Indicators Exploiting Sentinels (IMAGINES) sites. The results show that the GLASS and GEOV2 LAI products have great spatial integrity. However, the MODIS LAI product contains many missing pixels in tropical areas. These LAI products follow fairly consistent seasonal characteristics. The spatial discrepancies of these LAI products mainly exist in forest areas, especially evergreen broadleaf forests where the GLASS LAI values are generally lower than the GEOV2 LAI values by approximately 1.0 LAI units and lower than the MODIS LAI values by 0.5 to 1.0 LAI units. The spatial distribution of these LAI products has slight discrepancies in savannahs, broadleaf crops, grasses/cereal crops and shrubs. The GLASS and GEOV2 LAI products capture a complete and reasonable temporal profile, contrasting with the MODIS LAI product, which shows dramatic fluctuations, particularly during the growing seasons. These LAI products show similar temporal trajectories and interannual variations for all biome types except evergreen broadleaf forests. The direct validation shows that the accuracy of the GLASS LAI product is better than the accuracy of the MODIS and GEOV2 LAI products. The coefficient of determination (R2) of the GLASS, MODIS and GEOV2 LAI products versus the LAI values derived from the high-resolution reference maps are 0.68, 0.47 and 0.55, respectively, and the root mean square error (RMSE) of these products are 0.86, 1.22 and 1.21, respectively.

Retrieval of Vertical Foliage Profile and Leaf Area Index Using Transmitted Energy Information Derived from ICESat GLAS Data

The vertical foliage profile (VFP) and leaf area index (LAI) are critical descriptors in terrestrial ecosystem modeling. Although light detection and ranging (lidar) observations have been proven to have potential for deriving the VFP and LAI, existing methods depend only on the received waveform information and are sensitive to additional input parameters, such as the ratio of canopy to ground reflectance. In this study, we proposed a new method for retrieving forest VFP and LAI from Ice, Cloud and land Elevation Satellite (ICESat) Geoscience Laser Altimeter System (GLAS) data over two sites similar in their biophysical parameters. Our method utilized the information from not only the interaction between the laser and the forest but also the sensor configuration, which brought the benefit that our method was free from an empirical input parameter. Specifically, we first derived the transmitted energy profile (TEP) through the lidar 1-D radiative transfer model. Then, the obtained TEP was utilized to calculate the vertical gap distribution. Finally, the vertical gap distribution was taken as input to derive the VFP based on the Beer–Lambert law, and the LAI was calculated by integrating the VFP. Extensive validations of our method were carried out based on the discrete anisotropic radiative transfer (DART) simulation data, ground-based measurements, and the Moderate Resolution Imaging Spectroradiometer (MODIS) LAI product. The validation based on the DART simulation data showed that our method could effectively characterize the VFP and LAI under various canopy architecture scenarios, including homogeneous turbid and discrete individual-tree scenes. The ground-based validation also proved the feasibility of our method: the VFP retrieved from the GLAS data showed a similar trend with the foliage distribution density in the GLAS footprints; the GLAS LAI had a high correlation with the field measurements, with a determination coefficient (R2) of 0.79, root mean square error (RMSE) of 0.49, and bias of 0.17. Once the outliers caused by low data quality and large slope were identified and removed, the accuracy was further improved, with R2 = 0.85, RMSE = 0.35, and bias = 0.10. However, the MODIS LAI product did not present a good relationship with the GLAS LAI. Relative to the GLAS LAI, the MODIS LAI showed an overestimation in the low and middle ranges of the LAI and a saturation at high values of approximately LAI = 5.5. Overall, this method has the potential to produce continental- and global-scale VFP and LAI datasets from the spaceborne lidar system.

Are phenological variations in natural teak (Tectona grandis) forests of India governed by rainfall? A remote sensing based investigation.

Monitoring and assessment of vegetation phenology at the regional to global scale are essential to understand the characteristics of various biophysical parameters in terrestrial ecosystems. Passive optical remote sensing data have been used extensively in the recent past to study phenology of vegetation, also called land surface phenology, at diverse landscapes across the globe. In the present study, the moderate resolution imaging spectroradiometer (MODIS)-derived enhanced vegetation index (EVI) time series data (2000-2013) was used to study the phenology of dry and moist teak (Tectona grandis) forests of different biogeographic provinces of India. Four phenology metrics, viz., start of season (SOS), end of season (EOS), peak of season (POS) and length of season (LOS) were derived using the TIMESAT tool. The SOSs' of dry and moist teak were found during July-August. LOS of moist teak was found to be much longer (~ 48days) than dry teak. Also, a significant difference of leaf area index (LAI) (~ 2.8) of dry and moist teak forests was noticed during peak season from MODIS LAI product (MOD15A2). Vegetation phenology is greatly responsive to the fluctuation of climatic parameters such as rainfall. Hence, pre-season cumulative rainfall data were analysed to understand the control of rainfall over phenological variations in natural teak forests of India. It was noticed that rainfall was reasonably well correlated with SOS (R2 = 0.57-0.72) for both types of teak forests. The study highlighted the efficacy of time series MODIS EVI data to study the phenological variations in different teak forest types of India in a data-limited situation.

Modeling of Mixed-Pixel Clumping Index From Remote Sensing Data and Its Evaluation

The clumping index (CI) is a canopy structure parameter that describes the dispersion or grouping of leaves. Previously, it has been estimated based on the normalized difference between hotspot and darkspot (NDHD), which is derived from multi-angle remote sensing data. However, currently it is impossible to derive CI from NDHD for a large area at a spatial resolution finer than 275 m since such fine multi-angle data are unavailable. In this study, an algorithm of the mixed-pixel clumping index (MPCI) was implemented, and an MPCI map of China's landmass at 1 km resolution was derived from the HJ-1A/1B data at 30 m resolution. The MPCI map was compared with the previous NDHD CI derived from the moderate resolution imaging spectroradiometer (MODIS). The correlation of these two datasets was greater than 0.9, and the mean bias was approximately 0.1. Indirectly, the MPCI map was applied to an effective leaf area index (LAI) product to derive true LAI. Using the MODIS LAI product as a reference, we found that the coefficient of determination was improved from 0.72 to 0.80, and the root mean squared error was reduced from 0.53 to 0.35 m2/m2 after the effective LAI is corrected by this MPCI map, suggesting that this MPCI map is comparable to the NDHD CI. Although our algorithm is currently tested at 1 km resolution, potentially, it can be applied to higher spatial resolution than 275 m for mapping LAI and carbon cycle modeling before these multi-angle data at higher resolution are available.

The Retrieval of 30-m Resolution LAI from Landsat Data by Combining MODIS Products

Leaf area index (LAI) is a critical vegetation structural parameter in biogeochemical and biophysical ecosystems. High-resolution LAI products play an essential role in regional studies. Empirical methods, which normally use field measurements as their training samples and have been identified as the most commonly used approaches to retrieve structural parameters of vegetation from high-resolution remote-sensing data, are limited by the quality of training samples. Few efforts have been made to generate training samples from existing global LAI products. In this study, two methods (a homogeneous and pure pixel filter method (method A) and a pixel unmixing method (method B)) were developed to extract training samples from moderate-resolution imaging spectroradiometer (MODIS) surface reflectance and LAI products, and a support vector regression (SVR) algorithm trained by the samples was used to retrieve the high-resolution LAI from Landsat data at Baoding, situated in the Hebei Province in China, and Des Moines, situated in Iowa, United States. For the homogeneous and pure pixel filter method, two different sets of training samples were designed. One was composed of upscaled Landsat reflectance at the 500-m resolution and MODIS LAI products (dataset A1); the other was composed of MODIS reflectance and LAI products (dataset A2). With them, two inversion models were developed using SVR. For the pixel unmixing method, the training samples (dataset B) were extracted from unmixed MODIS surface reflectance and LAI products at 30-m resolution, and the third inversion model was obtained with them. LAI inversion results showed that good agreement with field measurements was achieved using these three inversion models. The R2 (coefficient of determination) value and the root mean square error (RMSE) value were computed to assess the results. For all tests, the R2 values are higher than 0.74 and RMSE values are less than 0.73. These tests showed that three models for the two methods combined with MODIS products can retrieve 30-m resolution LAI from Landsat data. The results of the pixel unmixing method was slightly better than that of the homogeneous and pure pixel filter method.

Long-Time-Series Global Land Surface Satellite Leaf Area Index Product Derived From MODIS and AVHRR Surface Reflectance

Leaf area index (LAI) is an important vegetation biophysical variable and has been widely used for crop growth monitoring and yield estimation, land-surface process simulation, and global change studies. Several LAI products currently exist, but most have limited temporal coverage. A long-term high-quality global LAI product is required for greatly expanded application of LAI data. In this paper, a method previously proposed was improved to generate a long time series of Global LAnd Surface Satellite (GLASS) LAI product from Advanced Very High Resolution Radiometer (AVHRR) and Moderate Resolution Imaging Spectroradiometer (MODIS) reflectance data. The GLASS LAI product has a temporal resolution of eight days and spans from 1981 to 2014. During 1981–1999, the LAI product was generated from AVHRR reflectance data and was provided in a geographic latitude/longitude projection at a spatial resolution of 0.05°. During 2000–2014, the LAI product was derived from MODIS surface-reflectance data and was provided in a sinusoidal projection at a spatial resolution of 1 km. The GLASS LAI values derived from MODIS and AVHRR reflectance data form a consistent data set at a spatial resolution of 0.05°. Comparison of the GLASS LAI product with the MODIS LAI product (MOD15) and the first version of the Geoland2 (GEOV1) LAI product indicates that the global consistency of these LAI products is generally good. However, relatively large discrepancies among these LAI products were observed in tropical forest regions, where the GEOV1 LAI values were clearly lower than the GLASS and MOD15 LAI values, particularly in January. A quantitative comparison of temporal profiles shows that the temporal smoothness of the GLASS LAI product is superior to that of the GEOV1 and MODIS LAI products. Direct validation with the mean values of high-resolution LAI maps demonstrates that the GLASS LAI values were closer to the mean values of the high-resolution LAI maps ( $\text{RMSE}=0.7848$ and $R^{2}=0.8095$ ) than the GEOV1 LAI values ( $\text{RMSE}=0.9084$ and $R^{2}=0.7939$ ) and the MOD15 LAI values ( $\text{RMSE}=1.1173$ and $R^{2}=0.6705$ ).

Method for improvement of MODIS leaf area index products based on pixel-to-pixel correlations

A new method, based on pixel-to-pixel correlations, was proposed to replace unreliable Moderate Resolution Imaging Spectroradiometer (MODIS) leaf area index (LAI) time series (termed the “pixel-to-pixel correction (PPC) method”). MODIS LAI products improved by the PPC method were compared to field-measured LAI data. Results show that the PPC method could reduce the error associated with MODIS LAI products in relation to the original MODIS LAI product, and provide a level of accuracy that meets the most reliable quality control level criterion (quality control = 0). The PPC method performed well at correcting unrealistically high and unreliable LAI values, and performed slightly better than the “upper envelope” smoothing method. The corrected data were also more continuous and smoother than the raw MODIS LAI products. Thus, the PPC method can successfully reduce the uncertainty and improve the accuracy of raw MODIS LAI products.

Upscaling of leaf area index in Terai forest plantations using fine- and moderate-resolution satellite data

Ecophysiological variables, such as leaf area index (LAI), play a key role in the functioning of ecosystem processes and are thus a useful determinant of primary production, evapotranspiration, and biogeochemical cycling. In the present study, upscaling of LAI was carried out by applying a transfer function from field LAI measurements to fine-resolution LISS III images and subsequently to coarse resolution Moderate Resolution Imaging Spectroradiometer (MODIS) data using a photosynthetically active radiation (PAR)/LAI ceptometer (AccuPAR model LP-80). Field data were collected from differently aged forest plantation types in the Terai Central Forest Division of Nainital district in Uttarakhand, India. The upscaling was done by establishing an empirical exponential relationship between normalized difference vegetation index (NDVI) and LAI. Results reveal a significant relationship (p < 0.01) between NDVI and LAI for each of the studied plantation types, i.e. teak, poplar, eucalyptus, and mixed plantation. The LAI was mapped at 23.5 m resolution by applying a plantation-specific LAI versus NDVI relationship derived from IRS Linear Imaging Self-Scanning Sensor images. The LAI maps were upscaled by using a simple linear averaging within nonoverlapping windows to match with Terra–MODIS 250 m resolution NDVI images. The upscaled time series of LAI was compared with representative field-measured LAI measurements and also with MODIS LAI at a resolution of 1000 m. Upscaled LAI was found to be significantly related to the field-measured LAI with a value of 0.69 for coefficient of determination and with a root mean square error of 0.77. On the other hand, upscaled LAI has less agreement with the MODIS LAI product (R2 = 0.5 and root mean square error = 0.70).

A MODIS-Based Global 1-km Maximum Green Vegetation Fraction Dataset

AbstractGlobal land-cover data are widely used in regional and global models because land cover influences land–atmosphere exchanges of water, energy, momentum, and carbon. Many models use data of maximum green vegetation fraction (MGVF) to describe vegetation abundance. MGVF products have been created in the past using different methods, but their validation with ground sites is difficult. Furthermore, uncertainty is introduced because many products use a single year of satellite data. In this study, a global 1-km MGVF product is developed on the basis of a “climatology” of data of Moderate Resolution Imaging Spectroradiometer (MODIS) normalized difference vegetation index and land-cover type, which removes biases associated with unusual greenness and inaccurate land-cover classification for individual years. MGVF shows maximum annual variability from 2001 to 2012 for intermediate values of average MGVF, and the standard deviation of MGVF normalized by its mean value decreases nearly monotonically as MGVF increases. In addition, there are substantial differences between this climatology and MGVF data from the MODIS Continuous Fields (CF) Collection 3, which is currently used in the Community Land Model. Although the CF data only use 2001 MODIS data, many of these differences cannot be explained by usage of different years of data. In particular, MGVF as based on CF data is usually higher than that based on the MODIS climatology from this paper. It is difficult to judge which product is more realistic because of a lack of ground truth, but this new MGVF product is more consistent than the CF data with the MODIS leaf area index product (which is also used to describe vegetation abundance in models).

Data-based mechanistic modelling and validation for leaf area index estimation using multi-angular remote-sensing observation time series

Spatially and temporally complete leaf area index (LAI) time series are required for crop growth monitoring, forest biomass estimation, and land surface process simulation studies. Global LAI products currently available include the Moderate Resolution Imaging Spectroradiometer (MODIS) LAI product. However, data quality still needs to be improved, especially with respect to temporal continuity. In this research, a new approach has been developed to estimate LAI time series using the data-based mechanistic (DBM) modelling procedure. Both the nadir viewing reflectance and anisotropic index (ANIX) time series derived from the MODIS product are used in LAI_DBM modelling and estimation, where the ANIX values are used as an auxiliary variable to represent the bidirectional reflectance anisotropy of the vegetation canopy. Both the MOD09GA multi-angular remote-sensing observations and the MOD15A2 LAI products are used in the LAI time series modelling and retrieval procedure. Ground measurements at typical vegetation sites are used to validate the estimated LAI. The preliminary results show that: (1) the new LAI_DBM approach using nadir viewing reflectance observation and ANIX time series can be used to improve the continuity of estimated LAI time series. The disturbance noise introduced by using the MOD09A1 directional reflectance observations directly can thus be reduced. (2) An ANIX time series can represent the vegetation canopy bidirectional reflectance anisotropy information and its dynamic changes. It works well in the retrieval procedure for improving LAI time series estimation. (3) The preliminary retrieval results demonstrate that the estimated LAIs can achieve better time series continuity than the original MODIS LAI product.

Retrieving Leaf Area Index From Landsat Using MODIS LAI Products and Field Measurements

Land surface models that operate at multiple spatial resolutions require consistent leaf area index (LAI) inputs at each scale. In order to produce LAI from Landsat imagery that is consistent with the Moderate Resolution Imaging Spectroradiometer (MODIS) LAI product and with in situ measurements, an improved regression tree mapping approach has been developed, which uses homogeneous and high-quality LAI retrievals from MODIS and existing LAI measurements acquired on the ground as samples to train a rule-based model based on Landsat surface reflectance data in visible and infrared bands. The methodology employs a simple geostatistical approach for determining sample weight, considering the spatial distribution of the samples and data quality. Results from the Soil Moisture Experiment of 2002 field campaign show that incorporation of available ground-based LAI measurements into the training sample collection improved field-scale estimation of LAI, especially in areas of very high vegetation cover fraction, but did not degrade consistency with MODIS LAI products.

Spatial scale conversion approach for moderate-resolution imaging spectroradiometer leaf area index product validation

This paper proposes a new spatial scale conversion method, which validates moderate resolution imaging spectroradiometer (MODIS) leaf area index (LAI) product when geometry information from the MODIS 1B product and classification result is combined. The in situ LAI data, Landsat Thematic Mapper (TM), and MODIS 1B product were utilized in this research. An object-oriented method was used to classify TM imaging, where each class was computed using an empirical model to achieve LAI respectively. The 30-m TM LAI image was aggregated into the MODIS 1B product based on the geometry information of MODIS 1B. The simulated MODIS 1B image was then converted into a MODIS LAI product and compared with the simulated LAI map pixel by pixel. The results showed a lower root mean square error and higher normalization of the absolute error with the new method. In addition, the field LAI was not significantly correlated with MODIS LAI, but it did show a strong correlation with TM LAI. The new method achieved a higher correlate coefficient with the MODIS product than the conventional methods. Using this validation method based on classification and image simulation can improve the accuracy of product certification.

A methodology for estimating Leaf Area Index by assimilating remote sensing data into crop model based on temporal and spatial knowledge

In this paper, a methodology for Leaf Area Index (LAI) estimating was proposed by assimilating remote sensed data into crop model based on temporal and spatial knowledge. Firstly, sensitive parameters of crop model were calibrated by Shuffled Complex Evolution method developed at the University of Arizona (SCE-UA) optimization method based on phenological information, which is called temporal knowledge. The calibrated crop model will be used as the forecast operator. Then, the Taylor’s mean value theorem was applied to extracting spatial information from the Moderate Resolution Imaging Spectroradiometer (MODIS) multi-scale data, which was used to calibrate the LAI inversion results by A two-layer Canopy Reflectance Model (ACRM) model. The calibrated LAI result was used as the observation operator. Finally, an Ensemble Kalman Filter (EnKF) was used to assimilate MODIS data into crop model. The results showed that the method could significantly improve the estimation accuracy of LAI and the simulated curves of LAI more conform to the crop growth situation closely comparing with MODIS LAI products. The root mean square error (RMSE) of LAI calculated by assimilation is 0.9185 which is reduced by 58.7% compared with that by simulation (0.3795), and before and after assimilation the mean error is reduced by 92.6% which is from 0.3563 to 0.0265. All these experiments indicated that the methodology proposed in this paper is reasonable and accurate for estimating crop LAI.

A comparison of methods for smoothing and gap filling time series of remote sensing observations – application to MODIS LAI products

Abstract. Moderate resolution satellite sensors including MODIS (Moderate Resolution Imaging Spectroradiometer) already provide more than 10 yr of observations well suited to describe and understand the dynamics of earth's surface. However, these time series are associated with significant uncertainties and incomplete because of cloud cover. This study compares eight methods designed to improve the continuity by filling gaps and consistency by smoothing the time course. It includes methods exploiting the time series as a whole (iterative caterpillar singular spectrum analysis (ICSSA), empirical mode decomposition (EMD), low pass filtering (LPF) and Whittaker smoother (Whit)) as well as methods working on limited temporal windows of a few weeks to few months (adaptive Savitzky–Golay filter (SGF), temporal smoothing and gap filling (TSGF), and asymmetric Gaussian function (AGF)), in addition to the simple climatological LAI yearly profile (Clim). Methods were applied to the MODIS leaf area index product for the period 2000–2008 and over 25 sites showed a large range of seasonal patterns. Performances were discussed with emphasis on the balance achieved by each method between accuracy and roughness depending on the fraction of missing observations and the length of the gaps. Results demonstrate that the EMD, LPF and AGF methods were failing because of a significant fraction of gaps (more than 20%), while ICSSA, Whit and SGF were always providing estimates for dates with missing data. TSGF (Clim) was able to fill more than 50% of the gaps for sites with more than 60% (80%) fraction of gaps. However, investigation of the accuracy of the reconstructed values shows that it degrades rapidly for sites with more than 20% missing data, particularly for ICSSA, Whit and SGF. In these conditions, TSGF provides the best performances that are significantly better than the simple Clim for gaps shorter than about 100 days. The roughness of the reconstructed temporal profiles shows large differences between the various methods, with a decrease of the roughness with the fraction of missing data, except for ICSSA. TSGF provides the smoothest temporal profiles for sites with a % gap &gt; 30%. Conversely, ICSSA, LPF, Whit, AGF and Clim provide smoother profiles than TSGF for sites with a % gap &lt; 30%. Impact of the accuracy and smoothness of the reconstructed time series were evaluated on the timing of phenological stages. The dates of start, maximum and end of the season are estimated with an accuracy of about 10 days for the sites with a % gap &lt; 10% and increases rapidly with the % gap. TSGF provides more accurate estimates of phenological timing up to a % gap &lt; 60%.

Assessment of the SeaWinds scatterometer for vegetation phenology monitoring across China

Vegetation phenology tracks plants' lifecycle events, revealing the response of vegetation to global climate changes. Changes in vegetation phenology also influence fluxes of carbon, water, and energy at local and global scales. In this study, we analysed a time series of Ku-band radar backscatter measurements from the SeaWinds scatterometer on board the Quick Scatterometer (QuickSCAT) to examine canopy phenology from 2003 to 2005 across China. The thaw season SeaWinds backscatter and Moderate Resolution Imaging Spectroradiometer (MODIS) leaf area index (LAI) time series were significantly correlated in 20 of the 22 sites (p < 0.05). A weighted curve-fitting method was applied to detect the start of season and end of season from both data sets. The SeaWinds scatterometer generally detected earlier timing of spring leaf-out and later fall senescence than the MODIS LAI data sets. The SeaWinds backscatter detected phenological metrics in 75.85% of mainland China. Similar spatial patterns were observed from the SeaWinds backscatter and MODIS LAI time series; however, the average standard deviation of the scatterometer-detected metrics was lower than that of MODIS LAI products. Overall, the phenological information from the SeaWinds scatterometer could provide an alternative view on the growth dynamics of land-surface vegetation.

Expanding MISR LAI Products to High Temporal Resolution With MODIS Observations

The Multi-Angle Imaging Spectroradiometer (MISR) is a powerful sensor for leaf area index (LAI) mapping with its simultaneous multi-angle observations. However, the LAI product derived from MISR observations has low temporal resolution, which is unsatisfactory for many applications. This paper presents an algorithm that expands the MISR LAI product to high temporal resolution with the aid of Moderate Resolution Imaging Spectroradiometer (MODIS) data. The algorithm establishes relationships between the MISR LAI and the MODIS red/near-infrared band ratio (simple ratio (SR)) pixel by pixel using coincident data of these two sensors for the past nine years. Using these pixel-based SR-LAI relationships, a new LAI product with the merits of the original MISR product and high temporal resolution is obtained from MODIS surface reflectance. The expanded LAI series was compared with the original MISR and MODIS LAI products, as well as field LAI measurements made at the Baohe and Maoershan forest sites and the Hulunbeier grassland site, to assess the algorithm's performance. The results show that the temporal coverage of the MISR LAI improved from 15.5% to 65.2% in an 8-day composite, and the mean root-mean-square error is 0.74 for the vegetated pixels. This LAI product has similar temporal consistency and seasonal dynamics to the existing MODIS LAI product generated from the main algorithm, but is more robust against the low quality of reflectance inputs. The expanded LAI product differs with field measurements by about 11.5%, with agreement to field observations at all three sites within an accuracy of 0.8 LAI.

Simple method for retrieving leaf area index from Landsat using MODIS leaf area index products as reference

Leaf area index (LAI) is a key parameter in most land surface models. Models that operate at multiple spatial scales may require consistent LAI inputs at different spatial resolutions or from different sensors. For example, the atmosphere-land exchange inverse model and associated disaggregation algorithm (DisALEXI) use the moderate resolution imaging spectroradiometer (MODIS) LAI product to model fluxes at regional scales (1- to 10-km grid resolution), and Landsat-based LAI to disaggregate to field scale (30-m grid). In order to make a MODIS-consistent LAI product from Landsat imagery for this combined scheme, a simple reference-based regression tree approach was developed. This approach uses homogeneous and high-quality LAI retrievals from MODIS as references to develop a regression tree relating these MODIS LAI samples to Landsat surface reflectances. Results show that the approach can produce accurate estimates of LAI from Landsat, as evaluated using field measurements collected during the soil moisture experiment of 2002, conducted in central Iowa during a period of rapid vegetation growth. The coefficient of determination (r2) computed between Landsat retrievals and field measurements was 0.94 at the field scale, with an overall mean bias error (MBE) of −0.07 and mean absolute difference (MAD) of 0.23. MAD values of 0.17 and 0.32 were obtained for low to moderate LAI (0-3) and high LAI (>3), respectively, with some underestimation for the high LAI (MBE = −0.28). The LAI maps retrieved from Landsat were consistent with the MODIS estimates when aggregated to coarser scales. MAD computed between Landsat- and MODIS-derived LAI ranged from 0.07 to 0.83 for different Landsat dates, with no significant bias compared to MODIS high-quality retrievals. This approach demonstrates a simple framework for producing MODIS-consistent LAI from Landsat data for modeling the land surface at different spatial scales.

A Temporally Integrated Inversion Method for Estimating Leaf Area Index From MODIS Data

Multiple leaf area index (LAI) products have been generated from remote-sensing data. Among them, the Moderate-Resolution Imaging Spectroradiometer (MODIS) LAI product (MOD15A2) is now routinely derived from data acquired by MODIS sensors onboard Terra and Aqua satellite platforms. However, the MODIS LAI product is not spatially and temporally continuous and is inaccurate in many areas for some vegetation types. In this paper, a new algorithm is developed to estimate LAI from time-series MODIS reflectance data (MOD09A1). A radiative-transfer model is coupled with a double-logistic LAI temporal-profile model, and the shuffled complex evolution optimization method, developed at the University of Arizona, is used to estimate the parameters of the coupled model from the temporal signature in a given time window. Preliminary analysis using MODIS surface-reflectance data at flux sites was performed to validate this method. The results show that the new algorithm is able to construct a temporally continuous LAI product efficiently, and the accuracy has been significantly improved over the MODIS LAI product as compared to field-measured LAI data.