Moderate Field Research Articles

Moderate Fields, Maximum Potential: Achieving High Records with Temperature-Stable Energy Storage in Lead-Free BNT-Based Ceramics

HighlightsAchieving ultrahigh energy-storage density (7.19 J cm−3) and outstanding storage efficiency (93.8%) at 460 kV cm−1 in BNT-based relaxor ferroelectric ceramics under a moderate electric field.Superior energy-storage performance accomplished through meticulous regulation of permittivity, enhancement of insulation quality, and strategic domain engineering via chemical formula optimization.The intricate structure–property relationship elucidated with precision using high-resolution transmission electron microscopy.

Full control of the orientation of non-symmetric molecules using weak and moderate electric fields.

We investigate the full control over the orientation of a planar non-symmetric molecule by using moderate and weak electric fields. Quantum optimal control techniques allow us to orient any axis of 6-chloropyridazine-3-carbonitrile, which is taken as prototype example here, along the electric field direction. We perform a detailed analysis by exploring the impact on the molecular orientation of the time scale and strength of the control field. The underlying physical phenomena allowing for the control of the orientation are interpreted in terms of the frequencies contributing to the field-dressed dynamics and to the driving field by a spectral analysis.

Chalcophosphate metasurfaces with multipolar resonances and electro-optic tuning.

We computationally analyze the electro-optic response of metasurfaces consisting of interconnected nanoantennas with multipolar resonances using a chalcophosphate, Sn2P2S6, as the active material. Sn2P2S6 has large electro-optic coefficients and relatively low Curie temperature (<70 °C), allowing for strong changes in the refractive index of the material under moderate electric fields if the temperature can be finely controlled in proximity of the Curie point. Through numerical simulations, we show that metasurfaces designed with this nanostructured material demonstrate a significant shift of multipolar resonances upon biasing, despite moderate refractive-index values of the chalcophosphate and reduced mode localization due to this. The magnetic octupolar resonance of a dense array provides the strongest shift of spectral features upon changes in the refractive index, and we attribute it to the high mode localization of this higher-order multipole. We numerically demonstrate that narrow lattice resonances of collective nature do not provide an advantage in shifting the spectral features because of the nonlocal and delocalized nature of the modes, which are spread in the nanoantenna surrounding rather than confined inside nanoantennas. Both in-plane and out-of-plane biasing of the chalcophosphate crystals are similarly efficient with suitable electrode design, choice of electrode material, and crystal orientation within the nanoantennas. These designs exhibit optical properties similar to those of metasurfaces with isolated nanoantennas in the dense array.

Giant manipulation of thermal conductivity anisotropy in black phosphorene under external electric fields.

The thermal anisotropy of materials holds significant theoretical and practical implications in the domains of thermal transport and thermoelectricity. Black phosphorene, a novel two-dimensional (2D) semiconductor, is notable for its exceptional chemical and physical properties, attracting substantial attention for its thermal transport characteristics. Similar to other 2D materials, black phosphorene exhibits pronounced in-plane thermal anisotropy. Given its expanding applications in nanoelectronics, optoelectronics, and thermoelectrics, there is a growing need to manipulate its anisotropic thermal transport. Current methods for adjusting anisotropy or isotropy typically involve structural engineering or materials processing, which are often costly, time-consuming, and irreversible. In contrast, little progress has been made with methods that are intact, robust, and reversible. Driven by the intrinsic relationship between interatomic interaction-mediated phonon transport and electronic charges, we conduct a comprehensive investigation into the impact of an external electric field on the thermal transport properties of 2D black phosphorene using first-principles calculations and the phonon Boltzmann transport equation. Our findings reveal that applying an electric field in the Zigzag direction reduces the lattice thermal conductivity of black phosphorene, with the Zigzag direction being more responsive to the electric field than the Armchair direction. By adjusting the electric field to a maximum of E(f_xx) = 0.2 V Å-1, the anisotropic thermal conductivity of black phosphorene decreases by more than 28%, demonstrating effective manipulation of anisotropy. This significant transition in anisotropic thermal transport arises from the substantial reduction in thermal conductivity along the Zigzag direction at moderate electric field strengths. The underlying cause of this variation in anisotropy can be attributed to changes in group velocity, with the phonon lifetime serving as a scaling factor for reducing anisotropy. Analysis of the electronic structures shows that stronger electric fields induce more charges, enhancing the screening effect. The electric field significantly alters thermal conductivity by affecting bond ionicity and anharmonicity. Our study introduces a robust approach for tuning the anisotropy of phonon transport in materials using an external electric field, without altering the atomic structure, thus offering considerable advantages for applications in nanoelectronics and thermoelectric energy conversion.

Development of a New Electromagnetic Extraction Channel from the AGOR Cyclotron

The extraction system of the superconducting AGOR cyclotron consists of an electrostatic deflector and three electromagnetic channels. As the electrostatic deflector has only a moderate field strength (<100 kV/cm), the first electromagnetic channel (EMC1) has to generate a rather strong dipole component resulting in current densities up to 169 A/mm2 in water-cooled copper coils. In the original design the coils consist of sections of hollow conductors, parallel to the beam path, vacuum-brazed to machined “bridges” over the beam aperture. Altogether there are over 200 brazed joints made in three subsequent cycles in the three coils (dipole, quadrupole and first harmonic corrector). In 25 years of operation two channels of this type have been “consumed”. The channels developed water leaks due to erosion of the copper by the high speed cooling water flow in the “bridge” regions that ultimately could not be repaired anymore. To remedy this problem the channel has been redesigned using bent conductors. A production technique for small radius bends and a new joining method to avoid vacuum brazing have been developed. The coil support taking up the 10 kN/m Lorentz forces on the windings are now made from isolating material instead of anodized aluminium to prevent grounding errors. The new channel (EMC1-U) has been in operation now for two years without any failure. A detailed comparison of the old and new design will be presented.

Critical Insight into Pretransitional Behavior and Dielectric Tunability of Relaxor Ceramics.

This model discussion focuses on links between the unique properties of relaxor ceramics and the basics of Critical Phenomena Physics and Glass Transition Physics. It indicates the significance of uniaxiality for the appearance of mean-field type features near the paraelectric-to-ferroelectric phase transition. Pretransitional fluctuations, that are increasing up to the size of a grain and leading to inter-grain, random, local electric fields are responsible for relaxor ceramics characteristics. Their impact yields the pseudospinodal behavior associated with "weakly discontinuous" local phase transitions. The emerging model redefines the meaning of the Burns temperature and polar nanoregions (PNRs). It offers a coherent explanation of "dielectric constant" changes with the "diffused maximum" near the paraelectric-to-ferroelectric transition, the sensitivity to moderate electric fields (tunability), and the "glassy" dynamics. These considerations are challenged by the experimental results of complex dielectric permittivity studies in a Ba0.65Sr0.35TiO3 relaxor ceramic, covering ca. 250 K, from the paraelectric to the "deep" ferroelectric phase. The distortion-sensitive and derivative-based analysis in the paraelectric phase and the surrounding paraelectric-to-ferroelectric transition reveal a preference for the exponential scaling pattern for ε(T) changes. This may suggest that Griffith-phase behavior is associated with mean-field criticality disturbed by random local impacts. The preference for the universalistic "critical & activated" evolution of the primary relaxation time is shown for dynamics. The discussion is supplemented by a coupled energy loss analysis. The electric field-related tunability studies lead to scaling relationships describing their temperature changes.

Impact of intermittent and continuous electric fields on peroxidase inactivation in orange juice: An experimental and molecular dynamics analysis

This study examines the efficacy of moderate electric fields (MEFs) on peroxidase (POD) inactivation in freshly squeezed orange juice. Inactivation kinetics was studied with two types of electric field application modes: intermittent and continuous, and compared that with thermal-only (no field) treatments at different temperatures ≤80 °C. The kinetic studies showed a significant increase in the inactivation rate constant (∼147%, P ≤ 0.05) with increasing temperature, from 72 to 80 °C, in the continuous MEF treatments, whereas the increase was minor (∼47%, P > 0.05) in the no field treatments. In molecular dynamics analysis, periodic unfolding and refolding of the POD molecule were observed in the intermittent electrical treatments. Noticeably, the continuous electrical treatments caused a greater degree of unfolding, exhibiting marked conformational and secondary structure changes, and increasing (P ≤ 0.05) salt bridge counts. These findings are relevant for inactivating enzymes at mild temperatures.

High-temperature dielectric energy storage films with self-co-assembled hot-electron blocking nanocoatings

Polymer thin films operable under concurrent electric and thermal extremes represent critical building blocks of capacitive energy storage and electrical isolator for modern power and electronic systems with ever-increasing demands for power density and payload efficiency. However, polymer dielectrics are prone to fast aging under high fields due to hot electrons injected from electrodes. Especially, performance high-heat polymers such as polyimides with high aromaticity suffer fast aging induced by non-thermalized electrons even at moderate fields due to their intrinsically low bandgap and injection barrier. Herein, a facile, low-cost, and scalable interface-engineering approach utilizing the highly ordered organic/inorganic layered nanocoatings is reported, which serve as a retrofittable solution to break this design constraint. By probing the energetic modes of transport and aging at pre-breakdown field, we demonstrate that our 2D montmorillonite (MMT) self-co-assembly nanocoatings can effectively boost the dielectric properties of substrate polyimide (PI) film by suppressing the charge injection and shifting the fast mode of hot-electron aging to a slow, ultimately thermalized process. This aging-impeding scheme imparts PI films with an exceptional endurance capability (enhanced by 100 MV/m) and a 6× improved charge-discharge efficiency at an elevated temperature of 175 °C. The nanostructured interface engineering disclosed in this work thus opens a new pathway of boosting the performance of a spectrum of high-heat polymer dielectrics already commercially available in thin gauges of films for applications in zero-emission electric aircraft and renewable energy integration.

Cucumber grafting on indigenous cucurbit landraces confers salt tolerance and improves fruit yield by enhancing morpho-physio-biochemical and ionic attributes

Pakistan is the 8th most climate-affected country in the globe along with a semi-arid to arid climate, thereby the crops require higher irrigation from underground water. Moreover, ~ 70% of pumped groundwater in irrigated agriculture is brackish and a major cause of secondary salinization. Cucumber (Cucumis sativus L.) is an important vegetable crop with an annual growth rate of about 3.3% in Pakistan. However, it is a relatively salt-sensitive crop. Therefore, a dire need for an alternate environment-friendly technology like grafting for managing salinity stress in cucumber by utilizing the indigenous cucurbit landraces. In this regard, a non-perforated pot-based study was carried out in a lath house to explore indigenous cucurbit landraces; bottle gourd (Lagenaria siceraria) (cv. Faisalabad Round), pumpkin (Cucurbit pepo. L) (cv. Local Desi Special), sponge gourd (Luffa aegyptiaca) (cv. Local) and ridge gourd (Luffa acutangula) (cv. Desi Special) as rootstocks for inducing salinity tolerance in cucumber (cv. Yahla F1). Four different salts (NaCl) treatments; T0 Control (2.4 dSm–1), T1 (4 dSm–1), T2 (6 dSm–1) and T3 (8 dSm–1) were applied. The grafted cucumber plants were transplanted into the already-induced salinity pots (12-inch). Different morpho-physio-biochemical, antioxidants, ionic, and yield attributes were recorded. The results illustrate that increasing salinity negatively affected the growing cucumber plants. However, grafted cucumber plants showed higher salt tolerance relative to non-grafted ones. Indigenous bottle gourd landrace (cv. Faisalabad Round) exhibited higher salt tolerance compared to non-grafted cucumber plants due to higher up-regulation of morpho-physio-biochemical, ionic, and yield attributes that was also confirmed by principal component analysis (PCA). Shoot and root biomass, chlorophylls contents (a and b), activities of superoxide dismutase (SOD), catalase (CAT) and peroxidase (POX) enzymes, antioxidants scavenging activity (ASA), ionic (↑ K and Ca, ↓ Na), and yield-related attributes were found maximum in cucumber plants grafted onto indigenous bottle gourd landrace. Hence, the indigenous bottle gourd landrace ‘cv. Faisalabad round’ may be utilized as a rootstock for cucumber under a mild pot-based saline environment. However, indigenous bottle gourd landrace ‘cv. Faisalabad round’ may further be evaluated as rootstocks in moderate saline field conditions for possible developing hybrid rootstock and, subsequently, sustainable cucumber production.

Granular micromagnetic HAMR model: investigation of damping dependence and parametric optimization for high performance

Heat assisted magnetic recording (HAMR) is a novel high-density magnetic recording technology that relies on thermal assist from a laser during the writing process. To achieve high writing performance, it is important to study and optimize the crucial factors affecting the magnetization reversal mechanism at elevated temperature. In this work, we use a multiscale approach that combines atomistic and micromagnetic models to study the magnetization reversal behavior in the recording medium. The atomistic model allows to parameterize accurately the macroscopic approach, which is utilized to model the system and its dynamics. We perform a parametric investigation of the switching properties as a function of the HAMR setup characteristics as well as the material properties, such as magnetic damping. The results show that high damping and moderate external fields can achieve high-performance HAMR media characterized by high switching probability, short switching time and low peak temperature. We demonstrate that switching occurs via the linear reversal mechanism. By systematic variation of the longitudinal susceptibility we force a transition to coherent reversal and demonstrate that this reduces the switching probability, showing linear reversal to be an important component within the HAMR process.

Gaseous argon time projection chamber with electroluminescence enhanced optical readout

Systematic uncertainties in accelerator oscillation neutrino experiments arise from nuclear models describing neutrino-nucleus interactions. To mitigate these uncertainties, we can study neutrino-nuclei interactions with detectors possessing enhanced hadron detection capabilities at energies below the nuclear Fermi level. Gaseous detectors not only lower the particle detection threshold but also enable the investigation of nuclear effects on various nuclei by allowing for changes in the gas composition. This approach provides valuable insights into the modelling of neutrino-nucleus interactions and significantly reduces associated uncertainties. Here, we discuss the design and first operation of a gaseous argon time projection chamber optically read. The detector operates at atmospheric pressure and features a single stage of electron amplification based on a thick GEM. Here, photons are produced with wavelengths in the vacuum ultraviolet regime. In an optical detector, the primary constraint is the light yield. This study explores the possibility of increasing the light by applying a low electric field downstream of the ThGEM. In this region, called the electroluminescence gap, electrons propagate and excite the argon atoms, leading to the subsequent emission of photons. This process occurs without any further electron amplification, and it is demonstrated that the total light yield increases up to three times by applying moderate electric fields of the order of 3 kV/cm. Finally, an indirect method is discussed for determining the photon yield/charge gain of a ThGEM, giving a value of 18.3 photons detected per secondary electron.

Electrical detection and modulation of magnetism in a Dy-based ferroelectric single-molecule magnet

Electrical control of magnetism in single-molecule magnets with peculiar quantum magnetic behaviours has promise for applications in molecular electronics and quantum computing. Nevertheless, such kind of magnetoelectric effects have not been achieved in such materials. Herein, we report the successful realization of significant magnetoelectric effects by introducing ferroelectricity into a dysprosium-based single-molecule magnet through spatial cooperation between flexible organic ligands and halide ions. The stair-shaped magnetization hysteresis loop, alternating current susceptibility, and magnetic relaxation can be directly modulated by applying a moderate electric field. Conversely, the electric polarization can be modulated by applying a small magnetic field. In addition, a resonant magnetodielectric effect is clearly observed, which enables detection of quantum tunnelling of magnetization by a simple electrical measurement. The integration of ferroelectricity into single-molecule magnets not only broadens the family of single-molecule magnets but also makes electrical detection and modulation of the quantum tunnelling of magnetization a reality.

Innovative Approaches to Enhance Activity of Endogenous Olive Enzymes—A Model System Experiment: Part II—Non-Thermal Technique

The aim of this study was to determine the optimal parameters of pulsed electric field treatment to increase the activity of β-glucosidase and lipoxygenase, crucial enzymes that improve the nutritional quality and sensory properties of virgin olive oils. The activity of the enzymes was determined spectrophotometrically immediately after treatment of model systems (commercial enzymes and their substrates) with pulsed electric fields and after simulation of the malaxation process for 30 min at 25 °C. Pulsed electric field treatments were performed with electric field strengths of 2.67 and 13.33 kV/cm at frequencies of 25 and 125 Hz for 1, 2, and 5 min. The results showed a positive correlation of β-glucosidase activity with the electric field strength and time, with the first of the two factors having the greatest influence. Lipoxygenase activity was affected only by the duration of treatment: positively immediately after treatment and negatively after simulation of the malaxation process. Based on these results, pretreatment with a moderate pulsed electric field for 2 min before the malaxation process could be proposed to increase the activity of β-glucosidase and lipoxygenase, e.g., for the production of virgin olive oils with higher concentrations of polyphenols and desirable volatile compounds.

Modulating SARS-CoV-2 Spike Protein Reactivity through Moderate Electric Fields: A Pathway to Innovative Therapies

Modulating SARS-CoV-2 Spike Protein Reactivity through Moderate Electric Fields: A Pathway to Innovative Therapies

Effect of electron-electron interaction on polarization process of exciton and biexciton in conjugated polymers

Abstract By using the one-dimensional tight-binding model modified to include electron-electric field interaction and electron-electron interaction, we theoretically explore the polarization process of exciton and biexciton in cis-polyacetylene. The dynamical simulation is performed by adopting the non-adiabatic evolution approach. The results show that under the effect of moderate electric field, when the strength of electron-electron interaction is weak, the singlet exciton is stable but its polarization presents obvious oscillation. With the enhancement of interaction, it is dissociated into polaron pair, the spin-flip of which could be observed through modulating the interaction strength. For the triplet exciton, the strong electron-electron interaction restrains its normal polarization, but it is still stable. In case of biexciton, the strong electron-electron interaction not only dissociate it, but also flip its charge distribution. We also calculate the yield of the possible states formed after the dissociation of exciton and biexciton.

Characterization of gene expression patterns in response to an orthotospovirus infection between two diploid peanut species and their hybrid.

Tomato spotted wilt orthotospovirus (TSWV) transmitted by thrips causes significant yield loss in peanut (Arachis hypogaea L.) production. Use of peanut cultivars with moderate field resistance has been critical for TSWV management. However, current TSWV resistance is often not adequate, and the availability of sources of tetraploid resistance to TSWV is very limited. Allotetraploids derived by crossing wild diploid species could help introgress alleles that confer TSWV resistance into cultivated peanut. Thrips-mediated TSWV screening identified two diploids and their allotetraploid possessing the AA, BB, and AABB genomes Arachis stenosperma V10309, Arachis valida GK30011, and [A. stenosperma × A. valida]4x (ValSten1), respectively. These genotypes had reduced TSWV infection and accumulation in comparison with peanut of pure cultivated pedigree. Transcriptomes from TSWV-infected and non-infected samples from A. stenosperma, A. valida, and ValSten1 were assembled, and differentially expressed genes (DEGs) following TSWV infection were assessed. There were 3,196, 8,380, and 1,312 significant DEGs in A. stenosperma, A. valida, and ValSten1, respectively. A higher proportion of genes decreased in expression following TSWV infection for A. stenosperma and ValSten1, whereas a higher proportion of genes increased in expression following infection in A. valida. The number of DEGs previously annotated as defense-related in relation to abiotic and biotic stress was highest in A. valida followed by ValSten1 and A. stenosperma. Plant phytohormone and photosynthesis genes also were differentially expressed in greater numbers in A. valida followed by ValSten1 and A. stenosperma, with over half of those exhibiting decreases in expression.

Enhanced interfacial water dissociation on a hydrated iron porphyrin single-atom catalyst in graphene

Single Atom Catalysis (SAC) is an expanding field of heterogeneous catalysis in which single metallic atoms embedded in different materials catalyze a chemical reaction, but these new catalytic materials still lack fundamental understanding when used in electrochemical environments. Recent characterizations of non-noble metals like Fe deposited on N-doped graphitic materials have evidenced two types of Fe-N4 fourfold coordination, either of pyridine type or of porphyrin type. Here, we study these defects embedded in a graphene sheet and immersed in an explicit aqueous medium at the quantum level. While the Fe-pyridine SAC model is clear cut and widely studied, it is not the case for the Fe-porphyrin SAC that remains ill-defined, because of the necessary embedding of odd-membered rings in graphene. We first propose an atomistic model for the Fe-porphyrin SAC. Using spin-polarized ab initio molecular dynamics, we show that both Fe SACs spontaneously adsorb two interfacial water molecules from the solvent on opposite sides. Interestingly, we unveil a different catalytic reactivity of the two hydrated SAC motives: while the Fe-porphyrin defect eventually dissociates an adsorbed water molecule under a moderate external electric field, the Fe-pyridine defect does not convey water dissociation.

Polyetherimide nanocomposites filled with in‐situ synthesised bismaleimide‐DDE@CCTO hybrid nanofibers enabling improved dielectric and interfacial performance

AbstractMost current research of nanocomposite dielectrics for modern electronic devices and electric equipment usually focuses more on dielectric properties while in some extent ignoring the interfacial adhesion characteristics. However, the poor interfacial adhesion frequently results in serious dielectric field distortion, which would in return impair the dielectric performance enhancement. As such, how to simultaneously achieve the excellent dielectric properties and interfacial adhesion performance in organic‐inorganic nanocomposite system is worth in‐depth investigation. To realise this aim, novel hybrid nanofibers are neatly fabricated using in situ copolymerisation reaction of bismaleimide and diamino‐diphenyl ether monomers on the CCTO nanofiller surface via covalent bond connections. The resulting nanocomposites achieve high dielectric constant (9.3) and low dielectric loss (0.0185) at 1 kHz. The BMI‐DDE@CCTO/PEI yields a high discharge energy density (3.09 J/cm3) at moderate electric field (200 MV/m). Noticeably, the nanocomposites enable stable dielectric performance over a wide temperature range from room temperature to 150°C. Moreover, the binding energy for BMI‐DDE and PEI is 1052 kJ/mol according to DFT calculation. As such, the authors speculate this interesting study would inspire the broad researchers devoting to investigating bismaleimide‐coated high‐aspect‐ratio nanofillers and their dielectric materials for collaboratively improved dielectric and interfacial performance.

Numerical analysis of electro-thermo-convection in a differentially heated square cavity with electric conduction

Natural convection with an electric field in the classic differentially heated square cavity is numerically studied. The electric conduction model for the generation of free space charges, which applies to weak and moderate electric field with weakly conducting liquids, is specially considered. The whole set of governing equations is implemented in the open-source finite-volume framework of OpenFOAM. Thorough investigation has been undertaken to analyze the thermal and flow characteristics of electro-thermo convection. The results reveal that the introduction of an electric field leads to a suppressive influence on flow motion across all considered Rayleigh numbers (Ra), aligning with recent experimental findings. This effect becomes more pronounced with increasing conduction number (C 0), resulting in the reduction of flow intensity and a thicker thermal boundary layer. Consequently, heat transfer is subdued due to the electric field, causing a decrease in the Nusselt number (Nu) as C 0 increases. To elucidate the mechanism how the electric field impacts natural convection, the torques induced by the electric and buoyancy forces are computed. Higher C 0 will lead to a lower buoyancy torque and stronger electric torque, where the electric torque is opposite to the buoyancy torque, thus the weaker flow strength is shown at higher C 0. Finally, to quantify the reduction in heat loss, the relative Nusselt number (Rnu) is introduced. It is found that there is a critical Ra corresponding to minimal Rnu, and for the parameters considered in this study, the minimum Rnu of 0.563 is observed at C 0 = 0.2 and Ra = 1.2 × 104. For large Ra, the Rnu almost keeps constant with increasing Ra.

Novel high-entropy relaxors with ultrahigh energy-storage efficiency and density

One of the major problems in ceramic capacitors is that their limited energy storage density (Wrec) and efficiency restrict the development in cutting-edge energy storage applications. In this paper, the non-equimolar ratio high-entropy ceramics are designed using the “entropy” strategy based on the traditional ferroelectric BaTiO3. Ultimately, the superparaelectric region of BaTiO3 is extended successfully, forming the local polymorphic distortion structure and realizing the transformation of ferroelectrics-relaxor ferroelectrics. Here, the outstanding Wrec of 7.3 J/cm3, the excellent ξ of 214.71 J/kV·m2, and the highest energy storage efficiency (η = 94.3 %) in high-entropy ceramics are obtained under moderate electric fields, indicating a breakthrough progress in energy storage applications of high-entropy relaxor ferroelectrics. Additionally, our work compared performance across multiple dimensions using measurement parameters, giving readers a more comprehensive reference.