Abstract

The extraction system of the superconducting AGOR cyclotron consists of an electrostatic deflector and three electromagnetic channels. As the electrostatic deflector has only a moderate field strength (<100 kV/cm), the first electromagnetic channel (EMC1) has to generate a rather strong dipole component resulting in current densities up to 169 A/mm2 in water-cooled copper coils. In the original design the coils consist of sections of hollow conductors, parallel to the beam path, vacuum-brazed to machined “bridges” over the beam aperture. Altogether there are over 200 brazed joints made in three subsequent cycles in the three coils (dipole, quadrupole and first harmonic corrector). In 25 years of operation two channels of this type have been “consumed”. The channels developed water leaks due to erosion of the copper by the high speed cooling water flow in the “bridge” regions that ultimately could not be repaired anymore. To remedy this problem the channel has been redesigned using bent conductors. A production technique for small radius bends and a new joining method to avoid vacuum brazing have been developed. The coil support taking up the 10 kN/m Lorentz forces on the windings are now made from isolating material instead of anodized aluminium to prevent grounding errors. The new channel (EMC1-U) has been in operation now for two years without any failure. A detailed comparison of the old and new design will be presented.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.