Significant amounts of work have been conducted in the area of plasma flow control, while the receptivity of plasma actuation in high-speed boundary layers has not had much attention over the last two decades. In the present study, the receptivity of a Mach 4.5 flat-plate boundary layer to plasma heating actuation produced by pulsed-DC surface dielectric barrier discharge (SDBD) has been studied by direct numerical simulation (DNS) and stability analysis. With the help of multimode decomposition technology, the amplitude of normal modes can be obtained. The results show that both fast and slow modes can be excited by plasma actuation, and the receptivity maximum is observed near the lower neutral branch. Because the pulsed-DC SDBD actuation is typical periodic pulse signals, when the total power remains constant, the Fourier components with multiples of actuation frequency have the same energy, regardless of the waveform, period, and width of the actuation signal. Such characteristics benefit the robustness of the pulsed-DC SDBD actuator. A theoretical prediction method by combining the receptivity model and linear parabolized stability equations is considered in the present study, and good agreement with the DNS results is achieved.
Read full abstract