Modal Power Distribution Research Articles

Continuous beam scanning by transverse mode-locking in a Pound-Drever-Hall stabilized resonator.

Mode-locking, i.e., the phase-locked superposition of resonator modes, enables ultrafast laser beam dynamics. Here, high-speed beam scanning at 79.6 MHz is achieved by generating sets of phase-locked transverse resonator modes. Such transverse mode-locked (TML) beams are obtained via conversion in an empty, optical resonator from incident longitudinal mode-locked beams. In this conversion scheme the modal power and phase distributions can be controlled to alter the dynamics of the emerging scanning beams. It is shown, that the Pound-Drever-Hall stabilization scheme is applicable to compound TML resonances and it is used to maintain resonance between the incident beam's spectral components and the transverse mode resonances. This way, TML states are reliably generated and continuously emitted.

Statistics of modal condensation in nonlinear multimode fibers

Optical pulses traveling through multimode optical fibers encounter the influence of both linear disturbances and nonlinearity, resulting in a complex and chaotic redistribution of power among different modes. In our research, we explore the phenomenon where multimode fibers reach stable states marked by the concentration of energy into both single and multiple sub-systems. We introduce a weighted Bose-Einstein law, demonstrating its suitability in describing thermalized modal power distributions in the nonlinear regime, as well as steady-state distributions in the linear regime. We apply the law to experimental results and numerical simulations. Our findings reveal that, at power levels situated between the linear and soliton regimes, energy concentration occurs locally within higher-order modal groups before transitioning to global concentration in the fundamental mode within the soliton regime. This research broadens the application of thermodynamic principles to multimode fibers, uncovering previously unexplored optical states that exhibit characteristics akin to optical glass.

Flux Flattening Large Heavy Water Power Reactors with Accelerator-Driven Photoneutron Source

Flux flattening and power uprating of large heavy water power reactors (HWRs) are demonstrated as an application of an accelerator-driven photoneutron source (ADS) in the ADS-CANDU concept where an array of electron linear accelerators is configured around the periphery of a subcritical CANDU-6 core. The localized ADS generated through (e−,γ,n) reactions in the HWR lattice perturbs the reactor power distribution by increasing the power of low-power bundles and depressing the power at the core center relative to the fundamental mode power distribution. Gross power uprating is feasible when the system is near critical, but the ADS array consumes tens of megawatts electric exceeding the power gained by a factor of more than 2 for the conservative ADS performance specifications assumed in the analysis. Several important challenges of fixed-source Monte Carlo simulations of near-critical multiplying media are investigated including severe load imbalance issues with distributed-memory parallel computing architecture and correlated local tallies in nonanalog (implicit absorption) Monte Carlo radiation transport. All subcritical fixed-source simulations in the study readily exceed the default random number stride used in most production Monte Carlo codes, and the stride exceedance causes both bias in local tally results (bundle powers) and spatial autocorrelation of these errors/biases in the large core. A legacy stride exceedance is critically reviewed, and the conclusions and subsequent interpretations of those conclusions are rejected. Several classes of radiation transport Monte Carlo problems are likely to be susceptible to stride exceedance, and this issue needs to be promptly addressed by the Monte Carlo analyst and code developer communities.

Co-planar arbitrary ratio optical power splitter based on cascaded hybrid-core vertical directional couplers for arbitrary guide modes

We propose a co-planar optical power splitter based on cascaded hybrid-core vertical directional couplers, which serves to split arbitrary ratio power of arbitrary guide modes. We fabricate the optical power splitter using micro-fabrication facilities. Our fabricated chip demonstrates power splitting for the E11, E21 and E12 modes between two few-mode waveguides. The experimental device shows that optical power splitting ranges can be larger than 11.0 dB, 12.1 dB and 11.3 dB for the E11, E21 and E12 modes, respectively, over the C + L band and beyond. The proposed optical power splitter could be used in the mode division-multiplexing systems where power splitting for arbitrary guide modes in few-mode waveguide is required in the ultra-broadband wavelength range for mode manipulating, such as mode power distribution, mode dependent loss equalization and all-optical MIMO signal processes.

Transverse mode distribution in multimode diode-pumped Raman fiber laser

Raman lasers based on multimode graded-index fibers may generate high-quality (M2∼2) Stokes beams when pumped by highly multimode (M2>30) laser diodes. Here we, examine, both experimentally and theoretically, the energy distribution of the output Stokes beam across the principal quantum mode number n in a bent multimode fiber operating well above the Raman threshold. In contrast to Kerr spatial beam cleaning, leading to a Rayleigh–Jeans mode power distribution, in a multimode Raman fiber laser, we find that the output mode powers approach an exponential distribution. We introduce a coupled-mode equations model, including random linear coupling between neighboring mode groups, and obtain a good agreement between numerical simulations and experimental results. The model shows that, for typical mode coupling coefficients, the randomization of the mode power distribution is compensated by both nonlinear (Raman and Kerr) effects and linear filtering from the fs-inscribed fiber Bragg grating, both acting on the Stokes beam over successive round trips. When random coupling becomes the dominating factor, the mode power distribution of the Stokes beam tends to equipartition, similar to what is observed with large-size highly multimode beams of low intensity (and nonlinearity) in the absence of any filtering.

Modal phase-locking in multimode nonlinear optical fibers.

Spatial beam self-cleaning, a manifestation of the Kerr effect in graded-index multimode fibers, involves a nonlinear transfer of power among modes, which leads to robust bell-shaped output beams. The resulting mode power distribution can be described by statistical mechanics arguments. Although the spatial coherence of the output beam was experimentally demonstrated, there is no direct study of modal phase evolutions. Based on a holographic mode decomposition method, we reveal that nonlinear spatial phase-locking occurs between the fundamental and its neighboring low-order modes, in agreement with theoretical predictions. As such, our results dispel the current belief that the spatial beam self-cleaning effect is the mere result of a wave thermalization process.

Spatiotemporal mode decomposition of ultrashort pulses in linear and nonlinear graded-index multimode fibers

We develop a spatiotemporal mode decomposition technique to study the spatial and temporal mode power distribution of ultrashort pulses in long spans of graded-index multimode fiber, for different input laser conditions. We find that the beam mode power content in the dispersive pulse propagation regime can be described by the Bose–Einstein law, as a result of the process of power diffusion from linear and nonlinear mode coupling among nondegenerate mode groups. In the soliton regime, the output mode power distribution approaches the Rayleigh–Jeans law.

Power Flow in Multimode Graded-Index Microstructured Polymer Optical Fibers.

We investigate mode coupling in a multimode graded-index microstructured polymer optical fiber (GI mPOF) with a solid core by solving the time-independent power flow equation (TI PFE). Using launch beams with various radial offsets, it is possible to calculate for such an optical fiber the transients of the modal power distribution, the length Lc at which an equilibrium mode distribution (EMD) is reached, and the length zs for establishing a steady-state distribution (SSD). In contrast to the conventional GI POF, the GI mPOF explored in this study achieves the EMD at a shorter length Lc. The earlier shift to the phase of slower bandwidth decrease would result from the shorter Lc. These results are helpful for the implementation of multimode GI mPOFs as a part of communications and optical fiber sensory systems.

Point radiance calculation of GI-MMF and its application in a fiber connection.

Graded-index multimode fiber (GI-MMF) is advantageous for low modal dispersion over its counterpart step-index multimode fiber, which renders it highly suitable for high-speed data transmission in short-range data links. To date, several theories and calculation methods have been proposed for MMF transmission and connection, most of which are based on geometric optics. Although the basic principle is extremely simple, the manipulation of the modal power distribution (MPD) variation along the transmission line that considerably affects the channel bandwidth still poses several challenges. Currently, the radiance of a point on the emitting fiber is assumed to evaluate the MPD at fiber connections, as its measurement or calculation method has not been determined yet. Thus, this paper proposes a method to numerically estimate the point radiance of GI-MMF using the near-field pattern (NFP) and far-field pattern (FFP) of the fiber. The method used data based on analytic functions representing NFP and FFP and yielded accurate estimations for the point radiance of GI-MMF; the accuracy was verified by comparing the fiber NFP and FFP calculated from the derived point radiance with the NFP and FFP analytical functions. In addition, the numerical aperture of the points on the fiber end-face obtained from the point radiance was in accordance with the theoretical value. Subsequently, we substituted the point radiance function of the GI-MMF into the matrix model that was established to compute the MPD conversion at fiber connectors under generic misalignments, including lateral, longitudinal, and angular offsets. Accordingly, the influence of misalignments on the MPD in GI-MMF connectors was assessed, and the performance of the fiber channel linked by GI-MMF was evaluated.

Ultrasensitive polyaniline‐nickel oxide cladding modified with urease immobilized intrinsic optical fiber urea biosensor

AbstractHerein, we report a polyaniline‐nickel oxide (PANI‐NiO) nanocomposite as an efficient immobilization matrix for development the optical fiber urea biosensor. Optical fiber sensing probe was developed by removing some portion of optical fiber at middle and modified with PANI‐NiO matrix. After the modification of cladding removed portion, it was immobilized with enzyme urease via glutaraldehyde as a bi‐functional cross‐linking agent. The physicochemical and optical properties of the PANI‐NiO matrix were explored by X‐ray diffraction, scanning electron microscopy, ultraviolet–visible, and Fourier transform infrared spectroscopic techniques. The characteristic features and performance of the developed sensor were evaluated via recording the output power and modal power distribution by means of a charge‐coupled device camera. The developed urea biosensor exhibits a selective response towards urea concentrations in the linear range 1 nM–100 mM with a lower detection limit of 1 nM. Sensor recorded as a 40 days stability and response time ~1 min. Thus, the obtained experimental results of the developed sensor promote its applicability with practical prospects in diverse field.

Real-Time HEV Energy Management Strategy Considering Road Congestion Based on Deep Reinforcement Learning

This paper deals with the HEV real-time energy management problem using deep reinforcement learning with connected technologies such as Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I). In the HEV energy management problem, it is important to run the engine efficiently in order to minimize its total energy cost. This research proposes a policy model that takes into account road congestion and aims to learn the optimal system mode selection and power distribution when considering the far future by policy-based reinforcement learning. In the simulation, a traffic environment is generated in a virtual space by IPG CarMaker and a HEV model is prepared in MATLAB/Simulink to calculate the energy cost while driving on the road environment. The simulation validation shows the versatility of the proposed method for the test data, and in addition, it shows that considering road congestion reduces the total cost and improves the learning speed. Furthermore, we compare the proposed method with model predictive control (MPC) under the same conditions and show that the proposed method obtains more global optimal solutions.

Power Response and Modal Decay Estimation of Room Reflections from Spherical Microphone Array Measurements Using Eigenbeam Spatial Correlation Model

Modal decays and modal power distribution in acoustic environments are key factors in deciding the perceptual quality and performance accuracy of audio applications. This paper presents the application of the eigenbeam spatial correlation method in estimating the time-frequency-dependent directional reflection powers and modal decay times. The experimental results evaluate the application of the proposed technique for two rooms with distinct environments using their room impulse response (RIR) measurements recorded by a spherical microphone array. The paper discusses the classical concepts behind room mode distribution and the reasons behind their complex behavior in real environments. The time-frequency spectrum of room reflections, the dominant reflection locations, and the directional decay rates emulate a realistic response with respect to the theoretical expectations. The experimental observations prove that our model is a promising tool in characterizing early and late reflections, which will be beneficial in controlling the perceptual factors of room acoustics.

Numerical and experimental study of a multimode optical fiber sensor based on Fresnel reflection at the fiber tip for refractive index measurement

This paper presents the numerical and experimental study of a multimode optical fiber (MMF) sensor based on Fresnel reflection at the fiber tip. Considering different modal power distributions (uniform mode distribution, gaussian and equilibrium mode distribution), the effective fraction of the incident light reflected at the interface between the end of the fiber and the surrounding medium is first calculated numerically with a ray model. Even when considering modal power distribution and non-normal incidence influence, simplifying assumptions such as normal incidence hypothesis can be made to facilitate experimental data exploitation, with a maximum error on the deduced medium refractive index of the 10-4 order. A statistical analysis of noise is then made, to study the influence of a random noise between 0.1% and 5% noise level: results show that the approximation error made by using normal incidence formula for a Fresnel sensor based on a MMF is significantly smaller than the repeatability error. These assumptions are then verified experimentally with two experimental setups by measuring the refractive index at 1550 nm of reference solutions (distilled water-isopropanol and distilled water-sodium chloride mixtures) with a Fresnel based on a multimode fiber, and a Fresnel based on single-mode fiber for comparison. Good agreement is found with refractive index values from the literature with a maximum relative difference of only 0.1%, and the maximum experimental uncertainties in this work is 1.1×10-4. Differences between refractive index measured with a Fresnel based on single-mode and multimode fiber are found to be in accordance with values from the statistical study.

Investigation on Speckle-Free Imaging at the Output of a Multimode Fiber under Various Mode Excitation Conditions

Speckle-free imaging using a multimode fiber has been widely used for imaging systems. Generally, previous work has assumed that all the propagating modes of the fiber are uniformly excited, but the modal power distribution is actually affected by excitation conditions. Here, we propose the utilization of a modal analysis method to study the dependence of the speckle contrast on the modal power distribution by changing the tilt angle of the Gaussian beam and on the group delay time difference caused by different fiber lengths. The results of numerical simulations and experiments show that, with an increase in the tilt angle of the Gaussian beam, the modal power is transferred to higher-order modes and the maximum delay difference between excitation modes becomes larger. Therefore, the inter-mode interference effect is effectively weakened, and the speckle contrast is significantly reduced. The increase in fiber length will also make the delay difference between excitation modes larger and thus the speckle contrast is decreased. For the larger tilt angle of the Gaussian beam, only a shorter optical fiber is required to reduce the speckle contrast significantly. Our work further promotes the use of a multimode fiber to produce speckle-free patterns in laser imaging systems.

Launch Light Design for Coupling Loss Measurement of Step-Index Multimode Fiber Connections

Measurement of coupling loss using step-index multimode fiber connections that are used in multi-gigabit optical communication systems must be accurate and precise to meet rigorous system specifications. We propose a launch light design for performing coupling loss measurement with reproducibility for step-index plastic cladding silica fibers. In the proposed design, the modal power distribution of the launch light is represented by the encircled angular flux (EAF). Specifically, the lower-order mode and the higher-order mode sides of the EAF boundary conditions were systematically calculated. The EAF boundary conditions were designed using our developed flowchart, which is composed of an optical model design, a performance review, and a model redesign based on the equilibrium mode distribution obtained from round-robin tests. The validity of the EAF boundary conditions was confirmed by optical design computing simulation and experiment. Under practical conditions wherein the misalignment range of a fiber connection is 40 μm or less in the lateral direction offset and 100 μm or less in the axial direction offset, the EAF boundary conditions of the launch light were determined such that the connection loss was 2.0 dB or less and the variation in loss due to modal power distribution variations was ±0.20 dB or less. The use of the launch light that meets the determined EAF boundary conditions allows for sufficient measurement reproducibility in verifying that the connection losses meet the system requirements. The alignment tolerance thus achieved is suitable for practical purposes.

Optical Power Distributions for 4×4 MIMO Visible Light Communications in Indoor Environment

Visible Light Communication (VLC) has emerged as a powerful technique for wireless communication systems. Providing high data rate and increasing capacity are the major problems in VLC. Recent evidence suggests that Multiple Input Multiple Output (MIMO) technique can offers improved data rates and increased link range. This paper describes the design and implementation of visible light communication system in indoor environment exploring the benefits of MIMO. The specific objective of this research was to implement a 4×4 Multiple Input (LEDs) Multiple Output (photodetectors)-VLC communication system, where a 16 white power LEDs in four arrays are setting up at transmitter and four RX modules are setting up at receiver side without the need for additional power or bandwidth as well as analyze a mathematical model for a VLC- 4×4 MIMO with different modes such as the suitable angles to cover the entire room. The research designs practically an electronic circuit for the transmitter and receiver with inexpensive components. The power distribution of different propagation modes is calculated for Single Input Single Output (SISO) and MIMO channels in typical room dimensions. The results in this paper indicate that the power is distributed uniformly for entire room when implemented VLC-MIMO as compared to VLC-SISO. Furthermore, a 4×4 MIMO implementing VLC is compared in term of BER vs. SINR with SISO communication system for both Line of Sight (LOS) and Non Line of Sight (NLOS) propagation modes. Comparing the two results of LOS and NLOS, it can be seen that a 4×4 MIMO implementing VLC for LOS perform better than the same system with NLOS due to decreasing in the received power resulted from the multipath effect.

Modal reconstruction of transverse mode-locked laser beams

Transverse mode-locking in an end-pumped solid state laser by amplitude modulation with an acousto-optic modulator was investigated. Using the stochastic parallel gradient descent algorithm the modal power coefficients and the modal phases of the transverse mode-locked (TML) laser beam were reconstructed from the measured spatial and spatio-temporal intensity distributions, respectively. The distribution of the reconstructed modal power coefficients revealed that the average mode order of the transverse mode-locking process could be increased by a factor of about 8 compared to previous works, corresponding to an increase in the normalized oscillation amplitude by a factor of about 3. Furthermore, we found that besides a non-Poissonian modal power distribution, strong aberrations of the modal phases occurred in the experiment, resulting in a deformation of the oscillating spot. Additionally, we demonstrated the generation of up to four spots oscillating simultaneously on parallel traces by operating the TML laser on a higher mode order in the orthogonal direction to the transverse mode-locking process. TML lasers are of interest, e.g., for beam scanning purposes, as they have the potential to enable spot resolving rates in the multi-GHz regime.

Study on Load-Side Optimization in Bifrequency MILO Source

In this article, we present an in-depth study of bifrequency magnetically insulated transmission line oscillator (MILO) generating RF output power in S-band with azimuthal partition. It is proposed to optimize the parameters across the load side, inserting gold plate in the collector and tuning the collector cavity depth. The proposal aims at enhancing the power conversion efficiency by employing the concept of a tapered extraction region and implementing four stubs. The stubs help to achieve proper impedance matching, subsequently improving the output power. Further, loss-free FR-4 dielectric is used in extractor vanes which helps to reduce the RF power distribution in other modes. The use of gold plate stimulates space charge near the surface and helps in deflecting the electrons toward the interaction cavities. The presence of FR-4 extractor vane helps to generate spoke current near the collector. The proposed system provides improvised RF coupling of the electron beam to the interaction cavities. The peak power efficiency of ~12.7% is achieved through the device. The beam–wave interaction process is illustrated using space charge instability mechanism. Taking into account the Lagrangian of electrons relationship between angular momentum and torque due to angular force is also derived. This in-depth study helps in the deep understanding of magnetic insulation process inside the device toward developing the proficient MILO source.

Hollow-Core Photonic Crystal Fiber Mach-Zehnder Interferometer for Gas Sensing.

A novel and compact interferometric refractive index (RI) point sensor is developed using hollow-core photonic crystal fiber (HC-PCF) and experimentally demonstrated for high sensitivity detection and measurement of pure gases. To construct the device, the sensing element fiber (HC-PCF) was placed between two single-mode fibers with airgaps at each side. Great measurement repeatability was shown in the cyclic test for the detection of various gases. The RI sensitivity of 4629 nm/RIU was demonstrated in the RI range of 1.0000347–1.000436 for the sensor with an HC-PCF length of 3.3 mm. The sensitivity of the proposed Mach–Zehnder interferometer (MZI) sensor increases when the length of the sensing element decreases. It is shown that response and recovery times of the proposed sensor inversely change with the length of HC-PCF. Besides, spatial frequency analysis for a wide range of air-gaps revealed information on the number and power distribution of modes. It is shown that the power is mainly carried by two dominant modes in the proposed structure. The proposed sensors have the potential to improve current technology’s ability to detect and quantify pure gases.

Improving Power Output of Battery and Mode Switching Frequency Based on Real-Time Average Power Method for Multi-Mode Hybrid Energy Storage System in Electric Vehicles

In this paper, a power-split strategy based on a real-time average power method is developed for improving power output of battery and mode switching frequency of a multi-mode hybrid energy storage system (HESS) in electric vehicles. To achieve mode switching and power distribution for the multi-mode HESS, a rule-based strategy is designed based on the high-frequency power demand. Furthermore, a simple real-time average power method is adopted to process the high-frequency power demand. Then, the real-time average power is used as a variable logic threshold value for the power-split strategy. Since the power-split controller responds to the smooth average power rather than the high-frequency power demand, the high-frequency mode switching of the multi-mode HESS can be avoided. The ultra-capacitor works as an enhanced low-pass power filter and the battery can supply smooth and steady output power to the motor inverter. Comparative simulations between the developed power-split strategy and the rule-based strategy are performed. The advantages of the developed power-split strategy for improving the power output of the battery and the mode switching frequency of the multi-mode HESS in electric vehicles are indicated under three typical driving cycles. Moreover, the longer time duration of the real-time average power is designed, the smoother power output of the battery and the lower mode switching frequency of the multi-mode HESS can be achieved.