Alcohol Mixtures Research Articles

Study on the molecular interactions of binary mixtures of allyl alcohol and amino-alcohol solvents through thermodynamic properties and FT-IR spectra and correlation with the Jouyban–Acree model

ABSTRACT Densities (ρ), speeds of sound (u), and viscosities (η) for three binary mixtures of allyl alcohol with 3-amino-propan-1-ol, 2-amino-2-methyl-propan-1-ol (aminomethyl propanol), and 1-amino propan-2-ol (isopropanol amine) were calculated at temperatures ranging from 303.15 to 313.15K and at atmospheric pressure over the entire composition range. Experimental measurements were used to calculate the excess molar volume, excess isentropic compressibility, deviation in viscosity, and excess Gibbs free energy of the activation of viscous flow. Partial molar properties and partialmolar properties at infinite dilution are also calculated. The Prigogine–Flory–Patterson (PFP) theory is applied to identify the predominant molecular interaction. The results of the Jouyban–Acree model are discussed in terms of the mean relative deviation (MRDs) and individual relative deviation (IRD) between the calculated and experimental parameters as an accuracy criterion. FTIR studies have also been added to confirm the experimental findings of the investigated mixtures.

Thermomechanical and mechanical properties of biocidal materials based on polyhexamethylene guanidine hydrochloride and polyvinyl alcohol

During the development of polymer science, attention has been attracted to different research areas. The current focus on polymer mixtures is due to their practical significance. Studying the physical and mechanical properties of polymer mixtures has led to a revision of existing basic concepts, the emergence of new research directions and the solution of practical problems. From this point of view, polymer mixtures are similar to copolymerization in achieving specific properties by combining different chemical structures. The use of polymer mixtures allows materials with the desired properties to be obtained at a faster rate than the synthesis of high-molecular compounds. In recent years, numerous studies have been published on the interaction of various polymers, particularly water-soluble and naturally occurring polymers that are safe for humans and the environment. The development of such materials is of great interest due to their high adhesive strength. These materials can be used to obtain polymer films with new valuable properties. This work investigates the potential of improving the thermomechanical and mechanical properties of films for use in construction as polymer biocidal additives by modifying polyhexamethylene guanidine hydrochloride with polyvinyl alcohol. Films based on a polymer-polymer mixture of polyhexamethylene guanidine hydrochloride and polyvinyl alcohol were used as a research object.

Modification of ramie fibre with a mixture of NaOH solution and iso-propanol solvent for enhancing its dyeing performance

Deep shade dyeing of ramie fibre is challenging due to its high degree of polymerisation, orientation, and crystallinity. The present work involved pre-treating ramie fibre with a solution containing a mixture of NaOH and alcohol in order to improve its dyeing ability. Based on the first screening results, it has been shown that iso-propanol is the optimal alcohol solvent for modifying ramie fibres with a mixture of NaOH solution, resulting in greater levels of dye exhaustion (E%), dye fixation rate (F%), total dye fixation efficiency (T%), and K/S values. Subsequently, the orthogonal array experimental technique (L16) was utilised to optimise the treatment conditions, and it was determined at a temperature of 25 °C, using a NaOH solution with a concentration of 140 g/L, a liquid ratio of 1:2 for the volume ratio of NaOH solution to iso-propanol solvent, and a treating period of 3 min. The treated samples were subjected to a range of analytical techniques, including XRD, FTIR, TGA, and SEM; these analyses conclusively verified that the samples' properties were altered due to the optimal combination treatment. The combination solution-treated samples had significantly higher barium values compared to the other samples, suggesting an ideal mercerisation treatment. The colourfastness to washing values exhibited satisfactory results for the treated samples. Besides, a handle assessment of raw ramie fabric and treated ramie fabric was conducted to enhance the practical application feasibility.

Biotechnological Prospects of Thermoanerobacter AK15: End-Product Formation from Carbohydrates, Amino Acids, and Lignocellulosic and Macroalgae Hydrolysates.

The conversion of lignocellulosic and algal biomass by thermophilic bacteria has been an area of active investigation. Thermoanaerobacter species have proven to be particularly capable in the production of bioethanol and biohydrogen from lignocellulosic biomass, although detailed studies of their abilities to utilize the full gamut of carbohydrate, amino acids, and proteins encountered in biomass hydrolysates are seldom comprehensively examined. Here, we re-evaluate the ability of Thermoanaerobacter strain AK15, a highly ethanologenic strain previously isolated from a hot spring in Iceland. Similar to other Thermoanaerobacter species, the strain degraded a wide range of mono- and di-saccharides and produced a maximum of 1.57 mol ethanol per mol of glucose degraded at high liquid-gas phase ratios. The ability of strain AK15 to utilize amino acids in the presence of thiosulfate is limited to the branched-chain amino acids as well as serine and threonine. Similar to other Thermoanaerobacter species, strain AK15 produces a mixture of branched-chain fatty acids and alcohols, making the strain of interest as a potential source of longer-chain alcohols. Finally, the strain was also shown to use butyrate as an electron sink during glucose degradation resulting in the reduced product butanol, in addition to end-products produced from glucose. Thus, strain AK15 is a promising candidate for ethanol and higher-order alcohols from a range of lignocellulosic and algal biomass.

Volumetric and acoustic studies of binary mixtures of n-butylamine with propanol at T = (298.15-318.15) K

ABSTRACT This study investigated the molecular interactions within mixtures of n-butylamine (NBA) and isomers of propanol. We conducted an exhaustive analysis of excess molar volume ( V m E ), deviation in ultrasonic speed ( Δ u ), and excess isentropic compressibility ( κ s E ) by utilising the measured data of density ( ρ ) and ultrasonic speed ( u ) at T = 298.15 K to 318.15 K under pressure at 0.1 MPa. This led to the derivation of secondary properties such as partial ( V ˉ i ), excess partial ( V ˉ iE ), and apparent molar volume ( V φi ). As the temperature rises, the V m E become more negative, while the Δu values more positive. The RK equation was employed to fit the excess properties data, with further exploration through additional theories. The findings presented here offer vital insights into amine – alcohol mixtures and their thermodynamic and acoustic properties, which are invaluable for optimising related chemical engineering and industrial processes.

Strong impact of exposure to water/solvent mixtures on permeance of nanofiltration membranes

Water/solvent mixtures released from industrial processes, especially in pharma and fine chemical synthesis or in advanced oil production, are an environmental concern, necessitating the development of efficient remediation and recycling techniques. Solvent-tolerant nanofiltration (STNF), situated between aqueous nanofiltration (NF) and solvent-resistant nanofiltration (SRNF), offers a promising solution. This study investigates the potential of using aqueous NF- and SRNF-membranes to treat water/solvent mixtures. Commercial membranes (NF270, DuraMem® 300, DuraMem® 200) and a lab-synthesized polyvinylidene fluoride (XL-PVDF NF) membrane were used to treat dimethyl sulfoxide (DMSO), acetonitrile (ACN), Isopropyl alcohol (IPA), or dimethylformamide (DMF) mixtures with water. The addition of 10% DMSO, ACN, IPA, or DMF to water significantly reduced the permeance of these NF-membranes, and an increase in temperature failed to restore the initial permeance. Changes in both viscosity and surface tension of the water/solvent solutions strongly influence the permeance of the NF-membranes. Flory-Huggins and Zimm-Lundberg theories offered an explanation for the phenomenon where solvent clusters form within the dense polymer matrix of NF-membranes upon exposure to water/solvent mixtures, resulting in decreased water permeabilities. NMR analysis identified of the presence of small amounts of solvents in the STNF-membranes, even still after prolonged exposure to pure water permeation. The results emphasize the current shortcomings of aqueous and solvent-resistant membrane chemistries in handling water/solvent mixtures. Minor solvent additions significantly modify NF membrane permeance, emphasizing the need for innovative material design, especially given the variable solvent content in industrial applications.

Synthesis of zirconia nanoparticles by sol-gel. Influence of acidity-basicity on the stability transformation, particle, and crystallite size

Currently, zirconium oxide (ZrO2, also called zirconia) is used for restoration or as an implant in dentistry due to its properties and the aesthetics that can be achieved. In the present work, zirconia particles were obtained by the sol-gel method using acid or basic medium to study its influence on the nucleation and growth of the particle size and determine the crystallite size of the high-temperature phase. Also, to control the particle size and improve the solubility and dispersion of the colloidal particles resulting from the hydrolysis-condensation reactions, a mixture of alcohol of different chain lengths were used. The zirconia samples were heat treated at 400, 600, and 800 °C and up to 250 h of holding times to follow the growth of crystallite size of zirconia phases. The results showed tetragonal (ZrO2-t) and monoclinic (ZrO2-m) zirconia as predominant phases, regardless of the synthesis conditions and heat treatment used. The monoclinic phase is favored at elevated temperatures and prolonged holding times, while the tetragonal ones are favored at low temperatures. The holding time promotes the transformation from the tetragonal to the monoclinic phase in both media (acid and basic). However, this transformation is promoted by the basic catalyst, while the acid medium favors the stability of the tetragonal phase at 400 and 600 °C. The phase transformation, particle size, and crystallite size depend on the synthesis conditions and heat treatment used to obtain the zirconia particles.

Spectroscopic and Computational Study of ZnCl2-Methanol Low-Melting-Temperature Mixtures.

Alcoholic electrolyte mixtures have wide applications in industries. In this study, a series of mixtures composed of ZnCl2 and methanol (MeOH) with ZnCl2 mol % from 6.7 to 25 were prepared, and their spectral, structural, and thermodynamic properties were studied using infrared (IR) spectroscopy, differential scanning calorimetry (DSC), and density functional theory (DFT) calculations. The DFT-assisted analysis of excess spectra, supported by 2D-correlation spectroscopy, led to the identification of the major constituents of ZnCl2-MeOH mixtures, namely, MeOH monomer, MeOH dimer, and ZnCl2-3MeOH complex, produced after dissociation of MeOH trimer which represents the bulk methanol. The Hirshfeld charge analysis showed that in the competition between the O-H···Cl hydrogen bond (H-bond) and Zn ← O coordination bond to transfer charge in ZnCl2-MeOH complexes, the latter always dominates, making MeOH positively charged. The phase diagram of the binary system showed the presence of V-shaped glass transition temperatures (Tg), characteristic of low-melting mixture solvents (LoMMSs). The present study provides insights into the microscopic properties of the system and sheds light on the understanding of the general principles to prepare deep-eutectic solvents (DESs) or LoMMSs using inorganic salts and alcoholic compounds.

Подбор и оптимизация методов экстракции ДНК из листьев гледичии трехколючковой (Gleditsia triacanthos L.)

Abstract. Currently, molecular genetic methods using DNA markers are increasingly used in studies of polymorphism of various populations of woody and shrubby plants. The purpose of this work was the evaluation and selection of protocols for the isolation and purification of DNA from the leaves of Gleditsia triacanthos L. for further studies using DNA labeling. Methods. Four protocols were used to isolate DNA from the leaf blade of Gleditsia triacanthos L. Anionic detergent sodium dodecyl sulfate was used in three isolation protocols for cell lysis, potassium acetate was used for purification from polysaccharides and proteins. In the fourth protocol, a cationic surfactant cetyltrimethyl ammonium bromide was used for cell lysis, the extract was purified with a mixture of chloroform-isoamyl alcohol (24 : 1). Precipitation of the isolated DNA was carried out with isopropanol. The quality of the isolated DNA was evaluated by spectrophotometry, horizontal electrophoresis and Real-time PCR with two types of primers. Results. Optimal conditions for DNA extraction from samples of Gleditsia triacanthos L. containing a large number of metabolites affecting the quality of the isolated extract were selected. By electrophoresis, it was found that both the isolation protocol with sodium dodecyl sulfate and the isolation protocol with cetyltrimethyl ammonium bromide make it possible to obtain a sufficient amount of DNA. The most purified DNA was obtained by the third protocol using sodium dodecyl sulfate and dithiotreitol and by the fourth protocol using cetyltrimethylammonium bromide. The results of PCR of the obtained samples with ITS and psbI-psbK primers indicate that a sufficient amount of product has been obtained and the reproducibility of ISSR markers. The scientific novelty of the work consists in choosing the optimal method of DNA extraction from the leaves of Gleditsia triacanthos L., which is a complex object containing a large number of potential PCR inhibitors. The protocol with sodium dodecyl sulfate and dithiotreitol made it possible to obtain DNA in the right amount and of acceptable quality.

Investigation of the use of gelatine-glycerine and gelatine-polyvinyl alcohol mixtures as tissue consistency preservatives in cadavers fixed with modified SEFS solution

This study aimed to improve the effectiveness of SEFS, a fixing solution composed of soap and ethanol. This was achieved by modifying the formulation of SEFS. Additionally, this study aimed to preserve the consistency of organs by perfusing cadavers with mixtures of gelatine-glycerin (gelatine-Gls) and gelatine-polyvinyl alcohol (gelatine-PVA) through vascular access. The modified SEFS embalmed cadavers were divided into two groups: Group I was treated with gelatine-glycerin, and Group II was treated with gelatine-polyvinyl alcohol and each group comprised of two goats and three rabbits. Over one year, cadavers were objectively assessed for hardness, colour, and joint range of motion. Additionally, the cadavers were subjectively evaluated after dissection and palpation. For the modified SEFS embalmment haptic and optic examinations of the muscles revealed they maintained a vivid colour tone, closely resembling their natural colour. The thoracic organs displayed natural colour, with the lungs retaining their shape without collapse. Notably, the walls of the atrium and ventricles of the heart remained intact without inward collapse. The use of gelatine-PVA yielded better outcomes than gelatine-Gls in preserving the volumes of both chest and abdominal organs. This was particularly evident in the heart, lungs, liver, spleen, and kidney. Overall, the modified SEFS and gelatin-PVA mixtures were superior in maintaining certain properties better than expected from cadavers.

Pore Fluid Dielectric Constant Effect on Geotechnical and Geo-Environmental Properties of Smectite and Kaolinite

ABSTRACT Organic compounds pose significant environmental concerns, including groundwater contamination. Clays are commonly used as liners to prevent contaminant permeation into the groundwater tables, necessitating an understanding of clay’s behavior in the presence of organic compounds. The presence of organic contaminants results in changes in the dielectric constant of pore fluid, which influences the interparticle energies and double layer thickness in the soil-pore fluid system. This study aims to elucidate the mechanisms of these changes by examining the response of smectite and kaolinite to variations in the dielectric constant. Experimental tests, including Atterberg limits, unconfined compression strength, water adsorption, sedimentation, pH, and XRD, were performed on clay samples at different concentrations of water-isopropyl alcohol mixtures. Results indicate that smectite exhibits higher Atterberg limits and water adsorption capacity compared to kaolinite. Smectite also shows more pronounced changes in response to decreasing dielectric constant. Conversely, changes in kaolinite’s behavior were attributed to variations in pore fluid viscosity and dipole moment. These findings emphasize the importance of considering viscosity and dipole moment alongside dielectric constant in predicting kaolinite behavior. Overall, this study enhances the understanding of how variations in pore fluid dielectric constant affect the geotechnical and geo-environmental behavior of smectite and kaolinite.

Pectin Nanoporous Structures Prepared via Salt-Induced Phase Separation and Ambient Azeotropic Evaporation Processes.

Polysaccharide nanoporous structures are suitable for various applications, ranging from biomedical scaffolds to adsorption materials, owing to their biocompatibility and large surface areas. Pectin, in particular, can create 3D nanoporous structures in aqueous solutions by binding with calcium cations and creating nanopores by phase separation; this process involves forming hydrogen bonds between alcohols and pectin chains in water and alcohol mixtures and the resulting penetration of alcohols into calcium-bound pectin gels. However, owing to the dehydration and condensation of polysaccharide chains during drying, it has proven to be challenging to maintain the 3D nanoporous structure without using a freeze-drying process or supercritical fluid. Herein, we report a facile method for creating polysaccharide-based xerogels, involving the co-evaporation of water with a nonsolvent (e.g., a low-molecular-weight hydrophobic alcohol such as isopropyl or n-propyl alcohol) at ambient conditions. Experiments and coarse-grained molecular dynamics simulations confirmed that salt-induced phase separation and hydrogen bonding between hydrophobic alcohols and pectin chains were the dominant processes in mixtures of pectin, water, and hydrophobic alcohols. Furthermore, the azeotropic evaporation of water and alcohol mixed in approximately 1:1 molar ratios was maintained during the natural drying process under ambient conditions, preventing the hydration and aggregation of the hydrophilic pectin chains. These results introduce a simple and convenient process to produce 3D polysaccharide xerogels under ambient conditions.

Enhancing soil water retention and plant growth with thermal crosslinked silk sericin-based hydrogel

In this study, a simple and clean crosslinking method was evaluated as a novel strategy to improve the structural stability of sericin-based hydrogels for soil water retention. The hydrogels were prepared by casting a polymer mixture of silk sericin (SS), carboxymethylcellulose (CMC), and polyvinyl alcohol (PVA). The films (HF) were heated at 90 °C for 4 h to obtain a thermally crosslinked hydrogel (HFT). The HFT was evaluated using Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), Differential Scanning Calorimetry (DSC), and Scanning Electron Microscopy (SEM). The changes in water absorption, gel fraction, and swelling behavior after crosslinking were also analyzed. The biodegradability of the HFT and its performance as a soil conditioner were evaluated through burial tests and in vivo assays using Chilli plants (Capsicum annuum), respectively. According to the results, the thermal crosslinking of HF is the result of the formation of microcrystals in the SS and PVA fractions, as well as the development of a dense network of H-bonds. Both mechanisms promoted the formation of a more stable pore structure in the HFT, which proved to be potentially biodegradable and suitable for improving soil water retention and supporting plant growth. Regarding HFT biodegradability, rapid weight loss was noted during the first 14 days of the soil burial test. On the other hand, HFT improved the availability of soil water and nutrients, favoring leaf growth and likely chlorophyll production.

Designing a bi-layer multifunctional hydrogel patch based on polyvinyl alcohol, quaternized chitosan and gallic acid for abdominal wall defect repair

In abdominal wall defect repair, surgical site infection (SSI) remains the primary cause of failure, while complications like visceral adhesions present significant challenges following patch implantation. We designed a Janus multifunctional hydrogel patch (JMP) with antibacterial, anti-inflammatory, and anti-adhesive properties. The patch comprises two distinct layers: a pro-healing layer and an anti-adhesion layer. The pro-healing layer was created by a simple mixture of polyvinyl alcohol (PVA), quaternized chitosan (QCS), and gallic acid (GA), crosslinked to form PVA/QCS/GA (PQG) hydrogels through GA's self-assembly effect and hydrogen bonding. Additionally, the PVA anti-adhesive layer was constructed using a drying-assisted salting method, providing a smooth and dense physical barrier to prevent visceral adhesion while offering essential mechanical support to the abdominal wall. The hydrogel patch demonstrates widely adjustable mechanical properties, exceptional biocompatibility, and potent antimicrobial properties, along with a sustained and stable release of antioxidants. In rat models of skin and abdominal wall defects, the JMP effectively promoted tissue healing by controlling infection, inhibiting inflammation, stimulating neovascularization, and successfully preventing the formation of visceral adhesions. These compelling results highlight the JMP's potential to improve the success rate of abdominal wall defect repair and reduce surgical complications.

Study on the molecular interactions of binary mixtures of allyl alcohol with isomeric amyl alcohol solvents through thermodynamic properties and FT-IR spectra and correlation with the Jouyban–Acree model

ABSTRACT Excess molar volume, excess isentropic compressibility, deviation in viscosity and excess Gibbs free energy for activation of viscous flow for binary mixtures of allyl alcohol (AA) with 2-methyl-2-butanol (2M2B), 2-methyl-1-butanol (2M1B) and 3-methyl-2-butanol (3M1B) components in different compositions were determined from the measured values of densities (ρ), viscosities (η) and speeds of sound (u) of pure components and their mixtures at various temperatures ranging from 303.15 K to 313.15 K. The excess properties have been discussed in terms of disruption of H-bonding and dipole–dipole interaction between the components of the mixtures. The Jouyban–Acree model results are discussed in terms of mean relative deviation (MRD) and individual relative deviation (IRD) between calculated and experimental parameters as an accuracy criterion and obtained a good agreement. The thermodynamic functions of activation of viscous flow have been estimated and tested. FTIR studies further confirm the experimental findings.

Effect of Microclimate on the Mass Emergence of Hypothenemus hampei in Coffee Grown under Shade of Trees and in Full Sun Exposure.

The rainfall regime has a significant impact on the microclimate and mass emergence of the coffee berry borer, Hypothenemus hampei (Coleoptera: Curculionidae) (CBB). Little is known, however, about the shade tree-microclimate-CBB mass emergence interaction. The objective of the present study was to compare the effect of microclimate on the mass emergence of CBB in a full sun-exposed plot with a plot shaded by trees. The experiment was conducted on a Robusta coffee farm in southern Chiapas, Mexico. In each plot, 18 traps baited with an alcohol mixture were installed to capture flying females, collecting caught individuals every hour from 8:00 to 18:00 h. A meteorological station recorded several microclimatic variables on 13 weekly sampling dates from February to May 2022. Significantly more CBB females were captured in the shaded plot. The largest number of CBB captures was recorded between 14:00 and 16:00 h for the shade plot and between 15:00 and 17:00 h for the sun-exposed plot. The mass emergence of CBB showed a positive association with precipitation, dew point, and wind speed samples and a negative association with maximum air temperature, average relative humidity, ultraviolet radiation, wind speed, and equilibrium moisture content. Our observations show that the relationship between shade trees, microclimate, and mass emergence of CBB is complex and that its study helps us to gain deeper insight into CBB bioecology and advance control techniques against this important pest.

Efficacy and Skin Microbiome Modulation Effects of a Fixed-Concentration Combination of Benzoyl Peroxide 4% Plus Niacinamide 4% in a Film-Forming Cream in Subjects with Mild-to-Moderate Acne: A Non-Sponsored, Prospective, Assessor-Blinded, Pilot Trial

Benzoyl peroxide (BPO) and niacinamide (Niac) are commonly used alone or in combination with other molecules in the treatment of acne. BPO and Niac in the same product could exert complementary and synergistic effects improving efficacy in acne. Furthermore, Niac could reduce some side effects of BPO, such as skin irritation and erythema. A film-forming cream product containing BPO 4% and Niac 4%, vehiculated in a mixture of polyvinyl alcohol (PVA) and perfluoropolyether (PFPE) has been recently developed (B-N cream). A 28-day, assessor-blinded pilot trial was conducted to evaluate the clinical efficacy, skin tolerability, sebum production, skin redness, and skin microbiome modulation of B-N cream in subjects with mild to moderate acne of the face. Twenty-two adult men and women with mild-to-moderate acne of the face participated in this trial, after their written informed consent. B-N cream was applied once daily in the evening. The use of B-N cream was associated with a statistically significant decrease in acne lesions after treatment in comparison with baseline (non-inflammatory lesions: −40%; inflammatory lesions: −43% and total lesions: −41%). The use of the cream was not associated with a skin barrier function alteration. The skin redness score (−11%) and the sebum production (−42%) were significantly reduced after treatment. The use of B-N cream determined a reduction in the relative abundance of the Actinobacteria phylum (Corynebacterium and Propionibacterium, from 56% to 47%) and a significant increase in the abundance of Bacteroidetes phylum (from 3% to 5.2%). In addition, the product was well tolerated. In conclusion, this film-forming, medical device cream was effective in subjects with mild-to-moderate acne, reducing acne lesions and sebum production without altering skin barrier function, offering good skin tolerability. Furthermore, this product exerts positive skin microbiome modulation effects.

Karakteristik Semburan Bahan Bakar Aviation Gasoline dengan Nozzle Pesawat Cessna 172S

Avgas fuel is fuel from aviation engines, namely piston engine type aircraft, where the spray of this fuel is very influential on the life of a piston type aircraft engine. The characteristics of avgas fuel bursts, namely the distance, temperature and shape of the spray, are rarely studied in Indonesia, so with using experimental and varied data collection techniques, we obtained the characteristic results of the avgas type fuel spray and its mixture, where the mixture of 20% ethanol with a distance of 21 cm at a pressure of 3 bar is the lowest point of the fuel mixture spray temperature, namely reaching 15oC, the effect of The mixture of fuel with ethanol means spots on the walls and combustion chamber due to the mixture of alcohol containing water so that traces and water spots can become crust on the combustion chamber.

Effects of Alkyl Chain Lengths and Isomers of Alcohols on the Phase Behavior of 1-Alkyl-3-methylimidazolium-Based Ionic Liquid + Alcohol Mixtures

Effects of Alkyl Chain Lengths and Isomers of Alcohols on the Phase Behavior of 1-Alkyl-3-methylimidazolium-Based Ionic Liquid + Alcohol Mixtures

Effect of Concentration of KOH, H2O, Temp in In-situ Transestrification Reaction of Sesbania sesban, Capparis deciduas seed

Fatty acid methyl ester is defined as the mono-alkyl esters of fatty acids derived from vegetable oils or animal fats. In simple terms, it is renewable source of energy. Petrodiesel can be replaced by biodiesel due to its superiority. Biodiesel has more lubricity which increases lifetime of engine. It is less toxic and gives less emission of Carbon dioxide, Carbon monoxide, hydrocarbons and particulate matter. The biodiesel fraction from oil content of Sesbania sesban, Capparis deciduas are found 29% & 63.75 respectively. The percentage of biodiesel yield increases with concentration of KOH as a catalyst. The aim of this article is to demonstrate the cost effective new source of energy by single step reaction i.e. production of oil by combining extraction and reaction of extract with the mixture of alcohols. In this article the effect of catalyst concentration, time, water content and temperature on in-situ transestrification is studied to obtain optimum yield of fatty acid methyl ester (Biodiesel).Fuel characterization tests show the striking similarity of various physical & chemical properties and campers to ASTM standards.