Minimal Surfaces Research Articles

Multi-Source Remote Sensing Analysis of Yilong Lake’s Surface Water Dynamics (1965–2022): A Temporal and Spatial Investigation

With the acceleration of global warming and the intensification of anthropogenic activities, numerous lakes worldwide are experiencing reductions in their water surface areas. Yilong Lake, a typical shallow plateau lake located on the Yunnan–Guizhou Plateau in China, serves as a crucial water resource for local human production, daily life, and ecosystem services. Hence, long-term comprehensive monitoring of its dynamic changes is essential for its effective protection. However, previous studies have predominantly utilized remote sensing data with limited temporal resolution, thus failing to reflect the long-term variations in Yilong Lake’s water body. This study employs high temporal resolution monitoring, utilizing multi-source satellite data (e.g., KeyHole, Landsat, HJ-1 A/B) images spanning from 1965 to 2022 to investigate the changes in Yilong Lake’s surface area, analyzing the influencing factors and ecological impacts of these changes. The results indicate that from 1965 to 2022, Yilong Lake’s water surface area decreased by 8.33 km2, with a maximum surface area of 40.49 km2 on January 7, 1986, and a minimum surface area of 10.64 km2 on April 20, 2013. These changes are characterized by three significant phases: (1) a rapid shrinking phase (1965–1979); (2) a fluctuating shrinking period (1986–2016); and (3) an expanding recovery phase (2016–2022). Spatially, the most significant shrinkage was observed along the southern and southwestern shores of the lake. The driving factors varied across different periods: sunshine duration was the dominant influence during the rapid shrinking phase (1965–1979), accounting for 82% of the changes; population and cropland area were the main drive factors during the fluctuating shrinking period (1986–2016), accounting for 56% of the changes; and during the expanding recovery phase (2016–2022), the population accounted for 75% of the changes in the lake’s surface area. Currently, the protection of Yilong Lake depends on water supplementation and strict regulation of outflow, resulting in the lake exhibiting characteristics similar to a reservoir. This long-term investigation provides baseline information for future lake monitoring. Our research findings can also guide decision-makers in urban water resource management and environmental protection, ensuring the scientific and rational use of watershed water resources, effectively curbing the shrinkage of Yilong Lake, and achieving long-term sustainable restoration of the lake’s ecology.

Synergetic enhancement of hydrogen concentration and heat transfer for triply periodic minimal surface based hydrogen storage reactor

Metal hydride hydrogen storage technology is considered a potential alternative energy and energy storage solution in promoting global economic decarbonization. However, the heat transfer coefficient between hydrogen storage materials and reactors is relatively low, which cannot meet the heat transfer and hydrogen storage requirements of the metal hydride tank. This study employs a triply periodic minimal surface (TPMS) based hydrogen storage reactor and design of experiments (DOE) to reveal the relationship between various parameters and their characteristics. The multi-physics coupling of fluid flow, heat transfer, chemical reactions, and stress in a metal hydride hydrogen storage reactor is also combined to promote the synergistic improvement of heat transfer and hydrogen storage efficiency. Numerical simulation results demonstrate that the hydrogen absorption volume fraction of tank equipped with TPMS is 0.926, which is significantly higher than that of conventional finned one. The absorption of hydrogen leads to volume expansion, resulting in a 30.61 % increase in expansion stress. Furthermore, the optimal hydrogen absorption volume fraction occurs at a temperature of 273.15 K, a pressure of 3.49 MPa, and a velocity of 5 m/s.

A functionally graded gyroid-type three-periodic minimal surface framework applied to implant-supported fixed complete dentures

A functionally graded gyroid-type three-periodic minimal surface framework applied to implant-supported fixed complete dentures

3D-printed polymer-derived ceramics with tunable cellular architectures

Ceramic materials possess high mechanical strength and environmental stability, but their brittleness limits their suitability for structural applications. A solution lies in using polymer-derived ceramics (PDCs), which offer enhanced toughness and versatility in shaping unlike traditional ceramic processing methods. This study explores tunable ceramic cellular architectures based on triply periodic minimal surface (TPMS) designs, fabricated via stereolithography (SLA) using a silicon oxycarbide precursor formulated for vat photopolymerization. By combining the preceramic polymer with a photoinitiator, crosslinkers, and other additives, intricate shapes are 3D-printed and then pyrolyzed under nitrogen, resulting in PDCs with complex TPMS geometries. The toughness, strength, and stiffness of the 3D-printed structures are evaluated through quasi-static compression experiments. Comprehensive material and microstructural characterizations of the PDCs are performed pre- and post-pyrolysis, employing visual inspection, X-ray micro-tomography, thermogravimetric analysis, energy dispersive X-ray spectroscopy, density, and rheological measurements. Optimization of 3D printing and pyrolysis parameters yields ceramic structures with 2.2 MPa compressive strength and 330 MPa stiffness with a lattice density of 0.5 g cm-3. The ceramic material, including porosity, had a maximum density of 1.63 ± 0.01 g cm-3. This low-cost SLA 3D printing technique is ideal for creating thin features and customized structures of bio-inspired, architectured ceramics. Furthermore, the process exhibits excellent printability, being compatible with common and cost-effective SLA, DLP, and LCD 3D printers.

Edge-Passivated Monolayer WSe2 Nanoribbon Transistors.

The ongoing reduction in transistor sizes drives advancements in information technology. However, as transistors shrink to the nanometer scale, surface and edge states begin to constrain their performance. 2Dsemiconductorsliketransition metal dichalcogenides (TMDs)have dangling-bond-free surfaces, hence achieving minimal surface states. Nonetheless, edge state disorder still limits the performance of width-scaled 2D transistors. This work demonstrates a facile edge passivation method to enhance the electrical properties of monolayer WSe2 nanoribbons, by combining scanning transmission electron microscopy, optical spectroscopy, and field-effect transistor (FET) transport measurements. Monolayer WSe2 nanoribbons are passivated with amorphous WOxSey at the edges, which is achievedusing nanolithography and a controlled remote O2 plasma process. The same nanoribbons, with and without edge passivation are sequentially fabricated and measured. The passivated-edge nanoribbon FETs exhibit 10 ± 6 times higher field-effect mobility than the open-edge nanoribbon FETs, which are characterized with dangling bonds at the edges. WOxSey edge passivation minimizes edge disorder and enhances the material quality of WSe2 nanoribbons. Owing to its simplicity and effectiveness, oxidation-based edge passivation could become a turnkey manufacturing solution for TMD nanoribbons in beyond-silicon electronics and optoelectronics.

A Spatial Risk Analysis of Springtime Daily Minimum Surface Air Temperature Values for Vineyard Site Selection: Applications to Pinot noir Grapevines throughout the Willamette Valley American Viticultural Area

A Spatial Risk Analysis of Springtime Daily Minimum Surface Air Temperature Values for Vineyard Site Selection: Applications to Pinot noir Grapevines throughout the Willamette Valley American Viticultural Area

Efficacy and Safety of Miebo® (Perfluorohexyloctane Ophthalmic Solution) in Treating Dry Eye Disease - a narrative review

Introduction: Dry eye disease (DED) is a prevalent and debilitating ocular condition characterized by discomfort, visual disturbances, and tear film instability. Recent therapeutic developments have introduced perfluorohexyloctane ophthalmic solution (Miebo®) as a potential treatment for DED, particularly in patients with meibomian gland dysfunction (MGD). Aim of the Study: This narrative review aims to evaluate the efficacy and safety of Miebo® in treating DED based on current clinical evidence. Materials and Methods: A comprehensive literature search was conducted in PubMed, Embase, and Cochrane Library databases up to May 2024 resulting in the identification of 9 studies. The review included randomized controlled trials, prospective cohort studies, and systematic reviews that focused on the use of Miebo® for DED. Data on efficacy in improving tear film stability and symptom relief, as well as safety profiles, were extracted and analyzed. Results: The evidence indicates that Miebo® significantly enhances tear film stability and alleviates symptoms of DED, with pronounced benefits observed in patients with MGD. Comparative studies demonstrate that Miebo® is more effective than conventional treatments, such as artificial tears and lipid-based formulations. Safety assessments reveal minimal ocular surface discomfort and no significant systemic adverse events associated with Miebo® use. Conclusion: Miebo® shows substantial efficacy and a favorable safety profile in managing DED, making it a valuable therapeutic option, particularly for patients who do not respond to traditional therapies. However, further research is needed to confirm its long-term effectiveness and safety.

CHARACTERIZATION OF SURFACE, SUBSURFACE DAMAGE AND THEIR EFFECT ON FATIGUE LIFE AFTER MACHINING OF AEROSPACE-GRADE ALUMINUM ALLOY (Al 6082-T6)

Aluminum alloys are widely used in the automotive and aerospace industries due to their lower mass-to-strength ratio than other metallic alloys. Apart from their inherent properties, aluminum alloys like other metallic alloys show a significant change in their mechanical properties according to the machining parameters. The research literature on obtaining optimum mechanical properties of aluminum alloys that undergo machining is very limited. Moreover, the combined effect of several parameters on the machinability of aluminum alloys has not yet been explored. In this paper, the effect of three machining parameters (Depth of Cut (DoC)), feed rate (FR), and cutting speed (CS) on the subsurface damage and fatigue life of aerospace-grade aluminum alloy (Al-6082-T6) is observed. Samples are prepared using a full fractional approach to effectively capture the effect of all input parameters. Thereafter, samples were subjected to surface roughness, micro-hardness, and fatigue life tests. Results of surface roughness and micro-hardness tests are compared with fatigue life. The general linear model was employed to capture the percentage effect of each input parameter on the output parameters. The results showed that DoC was the main contributing factor that caused subsurface damage, while surface roughness and fatigue life were mainly affected by FR and CS. Optical microscope images showed a white layer formation that had higher hardness than the base metal. Overall, this research work proposes the input parameters that can be used to achieve minimum surface damage and fatigue life.

A COMPARATIVE MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN THE END MILLING OF Al 3003 SUBJECTED TO NON-EQUAL CHANNEL ANGULAR PRESSING (NECAP)

This paper highlights the surface roughness optimization of a specific material, Al 3003, which has been subjected to the non-equal channel angular pressing (NECAP) process. Considering spindle speed, feed rate, and depth of cut as input variables and surface roughness as an output variable, experiments have been conducted based on the L27 orthogonal array of the Taguchi method. Four prediction models, namely exponential and response surface methodology (RSM) as mathematical models, and artificial neural networks (ANNs) prediction models with different training algorithms (Bayesian Regularization (BR) and Levenberg–Marquardt (LM)), are proposed. Applying effectiveness and performance criteria, the prediction accuracy of the exponential model (90.35%), RSM (93.07%), BR (97.83%), and LM (97.54%) shows that all proposed prediction models are efficient enough. The ANN model trained with BR is found to be the best fit for predicting surface roughness. In order to optimize surface roughness, a newly introduced optimization method called the Intelligible-in-time Logics Algorithm (ILA) is employed. High spindle speed (1000[Formula: see text]rev/min), low feed rate (100[Formula: see text]mm/min) and depth of cut (0.5[Formula: see text]mm) have been the optimum cutting parameter combinations to obtain minimum surface roughness (0.4956[Formula: see text][Formula: see text]m). The results have been verified by confirmation tests and Particle Swarm Optimization (PSO) method. ILA and PSO predict the same optimum parameter combinations and minimum surface roughness, while ILA performs optimization in less time (114.4[Formula: see text]s), about 3.5 times faster than PSO. The paper’s findings strongly advocate the application of ILA in machining data optimization.

Tuneable mechanical performance and reusability of 4D-printed heterogeneous metamaterials using shape memory biomass-derived polymer

ABSTRACT Herein, hybrid triply periodic minimal surfaces (TPMS) metamaterials were structurally designed and additively manufactured via 4D printing using a biomass-derived shape memory polymer. Two TPMS topologies including gyroid and diamond with homogeneous and graded structures were separately generated by adjusting the C parameter. The mechanical performance and deformation behaviour between the uniform and graded structures were compared, and the compressive shaping-recovery cycles were conducted. The results showed that the gyroid (C:0.7→0.4) and diamond (C:0.7→0.4) samples exhibited superior reusability to the uniform counterparts. Subsequently, heterogeneous metamaterials assembled by gyroid and diamond subsections were established and 4D-printed. It was observed that both the yielding and shape recovery were preferred occurring in the gyroid part, while the diamond subsection played a stronger supporting effect. Therefore, the compressive performance and deformation mode could be feasibly tuned by the hybridisation of TPMS, which broadened the functional and sustainable applications in energy absorption, intelligent protection and medical implants.

Advancements in diabetic foot insoles: a comprehensive review of design, manufacturing, and performance evaluation

The escalating prevalence of diabetes has accentuated the significance of addressing the associated diabetic foot problem as a major public health concern. Effectively offloading plantar pressure stands out as a crucial factor in preventing diabetic foot complications. This review comprehensively examines the design, manufacturing, and evaluation strategies employed in the development of diabetic foot insoles. Furthermore, it offers innovative insights and guidance for enhancing their performance and facilitating clinical applications. Insoles designed with total contact customization, utilizing softer and highly absorbent materials, as well as incorporating elliptical porous structures or triply periodic minimal surface structures, prove to be more adept at preventing diabetic foot complications. Fused Deposition Modeling is commonly employed for manufacturing; however, due to limitations in printing complex structures, Selective Laser Sintering is recommended for intricate insole designs. Preceding clinical implementation, in silico and in vitro testing methodologies play a crucial role in thoroughly evaluating the pressure-offloading efficacy of these insoles. Future research directions include advancing inverse design through machine learning, exploring topology optimization for lightweight solutions, integrating flexible sensor configurations, and innovating new skin-like materials tailored for diabetic foot insoles. These endeavors aim to further propel the development and effectiveness of diabetic foot management strategies. Future research avenues should explore inverse design methodologies based on machine learning, topology optimization for lightweight structures, the integration of flexible sensors, and the development of novel skin-like materials specifically tailored for diabetic foot insoles. Advancements in these areas hold promise for further enhancing the effectiveness and applicability of diabetic foot prevention measures.

Scale‐dependent mechanical performance variations in polylactic acid lattice structures fabricated via additive manufacturing

AbstractThe objective of this research is to explore the scale effect on the mechanical properties of sheet‐based triply periodic minimal surface (TPMS) uniform lattice structures fabricated with PLA (polylactic acid) under quasi‐static loading conditions. The scale dependency was evaluated by two additional breakdown categories, namely, wall thickness effect and unit cell size effect. Deformation mechanisms and failure modes as well as mechanical properties including stiffness, yield strength, first peak stress, and energy absorption based on the categories of wall thickness, unit cell size, and scale were evaluated experimentally. The assessment of the scale effect involved considering the combined influence of wall thickness and unit cell size. In addition, numerical analysis was also performed to investigate the stress distributions and compare with the experimental results for certain geometries. Ultimately, the relation between the normalized mechanical properties and relative density is evaluated and categorized, which can be used as an indication for future design practices.

Utilization of Additive Manufacturing Techniques for the Development of a Novel Scaffolds with Magnetic Properties for Potential Application in Enhanced Bone Regeneration.

This study focuses on designing and evaluating scaffolds with essential properties for bone regeneration, such as biocompatibility, macroporous geometry, mechanical strength, and magnetic responsiveness. The scaffolds are made using 3D printing with acrylic resin and iron oxides synthesized through solution combustion. Utilizing triply periodic minimal surfaces (TPMS) geometry and mask stereolithography (MSLA) printing, the scaffolds achieve precise geometrical features. The mechanical properties are enhanced through resin curing, and magnetite particles from synthesized nanoparticles and alluvial magnetite are added for magnetic properties. The scaffolds show a balance between stiffness, porosity, and magnetic responsiveness, with maximum compression strength between 4.8 and 9.2 MPa and Young's modulus between 58 and 174 MPa. Magnetic properties such as magnetic coercivity, remanence, and saturation are measured, with the best results from scaffolds containing synthetic iron oxides at 1% weight. The viscosity of the mixtures used for printing is between 350 and 380 mPas, and contact angles between 90° and 110° are achieved. Biocompatibility tests indicate the potential for clinical trials, though further research is needed to understand the impact of magnetic properties on cellular interactions and optimize scaffold design for specific applications. This integrated approach offers a promising avenue for the development of advanced materials capable of promoting enhanced bone regeneration.

Fabrication characterization and compression failure analysis of Ni-based alloy ABD-900AM TMPS structures via laser powder bed fusion

The novel high-strength and high-temperature nickel-based alloy developed for additive manufacturing, i.e., ABD-900AM, shows great potential in next-generation aircraft engines. However, there are limited investigations about the printing capability of ABD-900AM with complex structure as well as compression behaviors of this new alloy system. To meet the lightweight requirement, ABD-900AM with triply periodic minimal surface (TPMS) is fabricated by selective laser melting (SLM) in the present work, and the printing quality and compression performance of different TPMS structures are analyzed utilizing both experimental and computational methods. First, six types of TPMS structures are designed, and the external contours fabricated by SLMed ABD-900AM are detected through 3D optical scanning. In general, high fabrication quality is achieved with the proper process parameters, while the positive deviations are observed at the lateral surfaces and edges, and the negative deviations are observed at the upper regions of the cellular structures. Further, compression tests of SLMed ABD-900AM TPMS structures are conducted, and the failure mechanisms are evaluated. The equivalent elastic modulus is ranked as Diamond > Split-P > Primitive > Gyroid > I-WP > Lidinoid. The SLMed ABD-900AM TPMS structures shows advantages compared to these TPMS structures fabricated using typical metal alloys. Finally, the computational models of SLMed ABD-900AM TPMS structures are built up in the commercial software ABAQUS. The stress-strain behaviors and the failure process of different SLMed ABD-900AM TPMS structures are successfully reproduced.

Computational Investigation of the Fluidic Properties of Triply Periodic Minimal Surface (TPMS) Structures in Tissue Engineering

Computational Investigation of the Fluidic Properties of Triply Periodic Minimal Surface (TPMS) Structures in Tissue Engineering

Surface topography and corrosion resistance of AISI 630 stainless steel after finish turning under different cooling methods

AISI 630 stainless steel (SS) is widely used for medical devices. This paper describes the effects of dry, flood and minimum quantity lubrication (MQL) machining conditions on the surface topography and corrosion resistance (CR) of AISI 630 SS after finish turning. Small areas of valleys and large areas of peaks were observed on the surfaces with minimum surface roughness (SRmin) after dry machining at the feed rate (f) of 0.1 mm/rev and at the f = 0.14 mm/rev using the MQL method. Only small areas of peaks were observed after flood machining at the f = 0.1 mm/rev. Regardless of cooling methods, regularly distributed deep valleys and high peaks were observed on the surfaces with maximum surface roughness (SRmax) machined at the f = 0.35 mm/rev. Surfaces of the samples with SRmin and SRmax under flood machining and with SRmax under MQL machining had high oxygen content in the range of ∼ (20−30) %wt. during 7–72 days of the sample storage in SBF. Such an oxygen content is observed on the machined surfaces for which maximum peak height Sp parameters were in the range of ∼ (10–16) μm and maximum valley height Sv – ∼ (8–10) μm. Compared to SRmin, high ion diffusion was observed on surfaces with SRmax. This means that surfaces with regular deep valleys and high peaks provide high ion mobility between them. In addition, compared to dry and MQL machining, higher resistivity was obtained for the samples under flood machining. Depending on the industrial application requirements, the passivity and CR of AISI 630 SS can be modulated by selecting machining conditions and surface topography. It has been established that in order to achieve favorable CR of the AISI 630 SS surface after finish turning, the flood method is recommended.

ANISOTROPY AND MECHANICAL CHARACTERISTICS OF ULTRA-HIGH PERFORMANCE CONCRETE AND ITS INTERPENETRATING PHASE COMPOSITE WITH TRIPLY PERIODIC MINIMAL SURFACE ARCHITECTURES

Abstract This work numerically explores the anisotropy, impact phase wave propagation, buckling resistance, and natural vibration of ultra-high performance concrete (UHPC) and UHPC-steel interpenetrating phase composite (IPC) with triply periodic minimal surfaces (TPMSs), including sheet and solid Gyroid, Primitive, Diamond, and I-WP. The experiment is conducted verifying the accuracy of the numerical model in terms of Young's modulus of polylactic acid (PLA)-based TPMS lattices and PLA-cement IPCs with TPMS cores, with the highest percent difference of 15% found for IPCs and 17% found for lattice. The results indicate that UHPC material with sheet Gyroid exhibits the least extreme anisotropy in response to the varying orientation among other lattices regardless of the change of solid density, making it the ideal candidate for construction materials. Interestingly, compared to UHPC-based TPMS lattice, IPCs possess a much smaller anisotropy and exhibit almost isotropy regardless the variation of solid density and TPMS topology, offering a free selection of TPMS type to fabricate IPCs without much care of anisotropy. The phase wave and buckling resistance of UHPC- and IPC-based beams with TPMSs nonlinearly decrease with a drop of TPMS solid density, but it is the almost linear pattern for the case of natural vibration frequency. UHPC material and IPC with sheet Gyroid lattice are found to possess the lowest phase wave velocity and exhibit the least anisotropy of wave propagation, showing it as an ideal candidate for UHPC material to suppress the destructive energy induced by the external impact.

Design of 3D printing osteotomy block for foot based on triply periodic minimal surface

The ankle joint, which connects the lower limbs and the sole of the foot, is prone to sprain during walking and sports, which leads to ankle arthritis. Supratroleolar osteotomy is an ankle preserving operation for the treatment of ankle arthritis, in which the osteotomy is an important fixing and supporting part. In order to avoid stress shielding effect as much as possible, the osteotomy block is designed as a porous structure. In this study, the osteotomy block was designed based on three-period minimal surface, and the designed structure was manufactured by 3D printing. The mechanical properties of different structures were studied by mechanical test and finite element simulation. In mechanical tests, the Gyroid structure showed a progressive failure mechanism from bottom to bottom, while the Diamond structure showed a shear failure zone at 45° Angle, which was not conducive to energy absorption and was more prone to brittle fracture than the Gyroid structure. Therefore, the Gyroid structure is valuable for further research in the development of porous osteotomy.

Design of 3D printing osteotomy block for foot based on triply periodic minimal surface

The ankle joint, which connects the lower limbs and the sole of the foot, is prone to sprain during walking and sports, which leads to ankle arthritis. Supratroleolar osteotomy is an ankle preserving operation for the treatment of ankle arthritis, in which the osteotomy is an important fixing and supporting part. In order to avoid stress shielding effect as much as possible, the osteotomy block is designed as a porous structure. In this study, the osteotomy block was designed based on three-period minimal surface, and the designed structure was manufactured by 3D printing. The mechanical properties of different structures were studied by mechanical test and finite element simulation. In mechanical tests, the Gyroid structure showed a progressive failure mechanism from bottom to bottom, while the Diamond structure showed a shear failure zone at 45° Angle, which was not conducive to energy absorption and was more prone to brittle fracture than the Gyroid structure. Therefore, the Gyroid structure is valuable for further research in the development of porous osteotomy.

A new approach for heat transfer coefficient determination in triply periodic minimal surface-based heat exchangers

The development of additive manufacturing offers increasing opportunities in heat transfer. A wider range of materials is used in the 3D printing process of heat exchangers based on the Triply Periodic Minimal Surface. Due to the complexity of these structures, it is difficult to precisely determine the values describing the heat transfer process in these devices. One of the parameters describing the heat transfer process in heat exchangers is the heat transfer coefficient. This study describes a new method for determining the heat transfer coefficient in a heat exchanger based on a gyroidal lattice. The proposed new method allows for determining the heat transfer coefficient values without interfering with the internal space of the compact heat exchanger. The developed formula can be used in the indirect method of determining the value of the heat transfer coefficient in two-phase flow with boiling or condensation of the working medium. The thermal tests were carried out in the range of working flow rates 4–24 kg/h; the media temperature was 20 and 50 °C, the heat flux was from 0.1 to 0.4 kW. Tests were conducted for laminar flow in the 20 < Re < 200 range.