Mineral Oil Research Articles

Isolation, Screening and Identification of Biosurfactant Producing Strain Nocardiopsis dassonvillei var B2 From Oil Contaminated Soil.

Petroleum and other oil manufacturing industries contribute to environmental pollution by releasing hazardous hydrocarbons. Biosurfactants offer a sustainable solution for mitigating oil pollution through emulsification processes, safeguarding agricultural soils, aquatic ecosystems, and human health. This study focuses on isolating, screening, and identifying actinomycetes producing biosurfactant from oil-polluted soil in the naval dockyard of Visakhapatnam. Biosurfactant production was successfully achieved utilizing Kim's medium, which was supplemented with olive oil serving as the carbon source. The evaluation involved preliminary identification tests, including oil displacement, Parafilm-M, and lipase activity assays, using sodium lauryl sulfate as the standard reference. Surface tension and emulsification index measurements were conducted, and the chemical composition of glycolipids and phospholipids was elucidated using phenol-sulfuric acid and phosphate assays. Glycolipids, specifically identified as rhamnolipids, were confirmed via cetyltrimethylammonium bromide (CTAB) testing and quantitatively analyzed using the orcinol method. The cell-free broth exhibited antagonistic activity against Gram-positive and negative bacilli.16S rRNA sequencing-based phylogenetic analysis was carried out by the NCIM, Pune, with the gene sequence being deposited in GenBank. Further characterization of isolate B2 included scanning electron microscopy (SEM) analysis, as well as physiological and biochemical assays. This study highlights the ability of Nocardiopsis dassonvillei var. B2, isolated from oil-polluted soil, to produce biosurfactants, specifically glycolipids identified as rhamnolipids. Our findings represent the first reported instance of biosurfactant production from isolate B2 originating from the naval dockyard in Visakhapatnam, Andhra Pradesh, India.

Methanol Equilibrium Curves of Power Transformer Oil–Paper Insulation

To eliminate the problem of the aging of cellulose insulation in the manufacturing stage, a new drying method is being developed based on the use of methanol vapors. Previous studies have shown that the complete removal of methanol from the cellulose insulation after the drying process is very difficult. Therefore, it is necessary to check how the remaining methanol after drying affects the properties of both the cellulose materials and mineral oil. To conduct such studies, it is necessary to know the methanol content in oil that can be expected depending on its initial content in the cellulose materials and the temperature of the insulation system. Therefore, the main goal of this work is to develop methanol equilibrium curves for oil–paper insulation. To achieve the assumed goal, three-stage studies were conducted. A gas chromatograph equipped with a flame ionization detector was used in all stages of these studies. The gas partition coefficient between oil and air was determined for a temperature of 70 °C. The key experimental finding was the development of methanol equilibrium curves for oil–paper insulation. Thanks to this achievement, it is possible to estimate the methanol content in cellulose materials and mineral oil depending on the insulation temperature. Such data are necessary, among others, to plan appropriate studies aimed at assessing the impact of methanol content on the dielectric and physicochemical properties of these materials, important from the point of view of the operation of power transformers.

Response of hibiscus mealybug (Hemiptera: Pseudococcidae) to citrus volatiles induced by mechanical injury.

Hibiscus mealybug, Nipaecoccus viridis (Newstead) (Hemiptera: Pseudococcidae), is a recent invasive pest of citrus and many other crops in Florida. Nipaecoccus viridis attacks all above ground parts of citrus trees and heavy infestation can cause leaf drop and premature abortion of developing fruits. We quantified greater captures of N. viridis in cardboard band traps on areas of citrus trees that were intentionally injured by mechanical rasping of epidermal tissues as compared with similar but uninjured citrus branches. Direct field collection of headspace volatiles from mechanically injured or intact citrus branches revealed both qualitative and quantitative differences. Certain volatiles (γ-terpinene, citronellal, citronellyl acetate, β-E-farnesene, α-humulene, and α-E-E-farnesene) were only present in samples from damaged citrus branches. Behavioral assays using a laboratory Y-tube olfactometer revealed attraction of N. viridis to volatiles associated with mechanical damage of citrus including synthetic β-ocimene, γ-terpinene, sabinene, isomers of farnesene, and citronellal when loaded into lures at either of 2 concentrations (0.01 or 0.1 µg/µl). Subsequent field trapping experiments confirmed increased captures of various life stages of N. viridis in cardboard band traps baited with a 10.0 µg/µl concentration of farnesene:ocimene:sabinene blend (in 7:13:17 ratio), as well as those releasing either farnesene or ocimene alone at this same concentration, as compared with the mineral oil (diluent) negative control. Our results indicate that common plant related terpenes released by citrus following mechanical damage may be useful for development of an effective monitoring trap for N. viridis.

Geo-based fabrics: using earthen materials for wearables

ABSTRACT Over 50% of synthetic textiles in existence originate from polyester derived from petroleum oil. Synthetic textiles make up over 65% of global circulating textiles and the industry is known for being highly pollutant, resource wasteful, and responsible for nearly 10% of global carbon emissions annually. One prominent solution to the industry’s negative environmental impact is to develop alternative textiles for garment and architectural fabric applications. This paper presents a novel development of earth – and bio-based wearable textiles coined as BioMud Fabric which consists entirely of bio-based materials; 65% of which is clay-rich raw soil. More specifically, the material integrates raw soil with naturally occurring bio-based plastics to create a flexible, lightweight and biodegradable fabric. The research methodology includes a mix-design analysis, using electron microscopy, and a macro-scale structural characterisation using tearing tests. The final demonstrations showcase speculative design applications which serve to expand the possibilities of the material through fashion.

Influence of Aqueous Phase Salt and Oil Phase Surfactants and Viscosity on the Dynamic Interfacial Tension and Coalescence Timescales.

Liquid-liquid separation is a critically important process in the treatment of emulsions that can occur in our environment, such as oily stormwater, shipboard bilgewater, or off-shore oil spill treatment. Effective filtration systems, including coalescing filters, are essential for mitigating these environmental pollutants. Achieving this requires a comprehensive understanding of liquid-liquid interface dynamics influenced by additives and surfactants. Furthermore, understanding the impact of surfactants on emulsion stability in saline environments is vital for optimizing filtration processes and ensuring the protection of marine and freshwater ecosystems. In this work, these effects are highlighted using measurements performed across a range of droplet size, surfactant concentration, viscosity ratios, and saline presence. Dynamic IFT measurements are conducted using the pendant drop method for water in light mineral oil, with and without salt in the water phase. The effect of salt addition is also highlighted by using microfluidic coalescence experiments, in which it was found that the addition of salt increases the dimensionless drainage time below the critical micelle concentration. The second focus of this work is to study the effect of bulk phase viscosity on the stability. Dynamic IFT measurements are performed at both millimeter and micrometer scales using pendant drop experiments and microfluidic tensiometry, respectively, involving light and heavy mineral oils with varying SPAN80 surfactant concentrations. The surfactant diffusivity and interfacial adsorption and desorption rates are then extracted by fitting a surfactant diffusion and equation of state equations to the dynamic IFT measurements. The results of the IFT decay, surfactant diffusivity, and adsorption rates are compared at two different viscosity ratios. This study also compares the times required for IFT relaxation with the film drainage times in water-in-oil systems. The comparison aids in comprehending the impact of competing timescales during film drainage. The findings presented in this paper offer valuable insights into the design and optimization of liquid-liquid filtration systems, especially when operating under challenging environmental conditions, such as in saline environments. The principles explored here can be applied to improving industrial water treatment and in the design of advanced filtration technologies for chemical and petrochemical industries, particularly those involving flow, contributing to more sustainable and efficient practices in handling emulsified waste streams.

Exploring the potential of Desert Rose fibers (Adenium obesum) for the remediation of oil-contaminated sites

This work proposes the use of Fibers from the pod of Desert Rose, Adenium obesum (DRF), as an alternative for oil removal in spill scenarios and cleaning of contaminated bird feathers. The sorption capacity of biomass was evaluated through kinetics tests, which were adjusted using the Fractal Linear Driving Force (FL-LDF) model. Additionally, capture stability tests were performed to determine the oil retention capacity of the material. Furthermore, the DRF were tested in the cleaning of bird feathers, and the fibers were characterized using Optical Microscopy (OM), SEM, FTIR and TGA. The DRF demonstrated sorption efficiency, with approximately 13.01 ± 1.87 g/g, 14.59 ± 0.58 g/g and 49.12 ± 2.43 g/g, for diesel oils, 20 W50 mineral oil and petroleum, respectively. It was found that these results were achieved by combining the viscosity with the functional groups identified on the material surface, which strongly contributed to the sorption capacity. The sorption kinetics indicated a fast rate in the first minute of testing for diesel oils and 20 W50. The material was still stable, managing to retain 65 %, 83 % and 78 % and removing from the feathers a total of 82 %, 71 % and 81 % of diesel oils, 20 W50 and petroleum. The biomass presented a hollow cylindrical structure, with the presence of grooves and roughness in some regions of its surface with a thin wall, demonstrating to be an efficient and competitive oil sorbent.

The effects of oil adjuvant on the degradation of spirotetramat and its metabolites in apple cultivation

Spirotetramat is a frequently used insecticide in integrated pest management (IPM) strategies against rosy apple aphid (Dysaphis plantaginea) and woolly apple aphid (Eriosoma lanigerum) in apple cultivation. It is known that paraffin oil adjuvants increase the effect of spirotetramat against aphids. In contrast, there is a knowledge gap regarding the effects of co-applied paraffin (mineral or petroleum) oil on the degradation of spirotetramat and its metabolites (B-enol, B-keto, B-mono, and B-glu), which has not been previously investigated. Spirotetramat combined with formulated paraffin oil was tested against two aphid species and the residues of spirotetramat and its metabolites on leaves and apples were quantified using Liquid Chromatography coupled with tandem Mass Spectrometry (LC-MS/MS). The results showed that spirotetramat is highly effective against D. plantaginea, decreasing infestation by almost 100%. Furthermore, spirotetramat was shown to be effective against E. lanigerum, the reduction in infestation ranged between 67.9 and 97.7% during the last validation date. The addition of paraffin oil increased the effect of spirotetramat and affected its degradation, indicating that its efficacy could be connected to its metabolites. B-mono and B-glu were the most persistent metabolites in apple fruit overall when paraffin oil was applied.

Control of Diaphorina citri (Hemiptera: Liviidae) using environmentally friendly chemical alternatives

Diaphorina citri poses a serious threat to citrus. Here, the nymphicidal activity of mineral and soybean oils, organosilicon, and citrus-essential-oil-derived adjuvants was evaluated. Additionally, mineral and soybean oils were studied for antifeedant and repellent effects on adults. Residual effect on the parasitoid Tamarixia radiata was also assessed. Nymphicidal activity ranged between 65–83%, with Silwet enhancing mineral and soybean oil efficacy. Evaluated soybean and mineral oil exhibited comparable antifeedant and repellent effects on adults. All products caused <20% mortality in T. radiata, even 24 h after spraying. Overall, tested adjuvants and oils offer promising eco-friendly alternatives for sustainable D. citri management.

Analysis of Acid Options in the Purification of Spent Motor Engine Oil Using Acidified Clay

Abstract: This research is centered on the purification of Spent Shell Helix (HX3 20W-50) lubricating oil using acidified clay treatment with three acids options: mineral sulfuric acid (H2SO4), organic acetic acid (CH3COOH), and organic citric acid (C6H8O7), (a novel washing agent). The clay mineral, spent, purified, and fresh lubrication oil samples were characterized to determine their physicochemical properties. The clay mineral was characterized using Energy-Dispersive X-Ray Fluorescence (EDXRF). The result indicated that the clay was bentonite clay and it was successfully acidified. The result also indicated that properties of the spent lubricating oil such as Kinematic viscosities at 40 oC and 100 oC increased from 118.9 cSt and 13.9 cSt for the spent oil to 169.7 cSt and 15.2 cSt, 178.2 cSt and 16.3 cSt, 183.4 cSt and 16.8 cSt for the oil samples purified with C6H8O7, CH3COOH and H2SO4 respectively Also, the flash point increased from 106 oC for the spent oil to 133 oC, 180 oC, 189 oC for the oil samples purified with C6H8O7, CH3COOH and H2SO4 respectively. The FTIR analysis of the spent oil revealed the presence of primary oxidized products, absent in spent engine oil purified with mineral sulphuric acid (H2SO4), organic acetic acid (CH3COOH), and fresh oil. Acidified clay effectively purified the spent engine oil, bringing its physicochemical properties closer to those of fresh oil. However, the effectiveness of the treatment varied depending on the specific acid used.

COMPARAÇÃO ENTRE DIFERENTES ÓLEOS COMO FLUIDOS DE CORTE: UMA REVISÃO BIBLIOGRÁFICA

This work presents a comparative analysis among different types of oils used as cutting fluids in the machining industry. The research aimed to address the comparison of mineral, synthetic, and vegetable oils, considering their physicochemical properties, machining performance, and environmental impacts of these fluids. The proper choice of cutting fluid is essential to optimize the cutting process of metallic materials, directly influencing the operation efficiency, the quality of machined parts, and production costs. The results indicate that each type of oil has distinct characteristics that should be considered in selecting the most suitable cutting fluid for each application. This study contributes to the understanding of the importance of choosing the correct oil as a cutting fluid and provides valuable information for professionals and researchers in the machining field.

The Economic Shockwaves of the Russia-Ukraine Conflict and Energy Sources Prices – The Impact on International Energy Markets

The Russia-Ukraine conflict has raised concerns regarding the stability of the global energy sector, considering that Russia is a big player in the industry, producing and exporting crude oil and natural gas globally. This study aimed to empirically investigate the impact of the conflict on the prices of energy sources in international markets. The analysis was conducted using secondary data. The data was for prices of various commodity products, including diesel, petroleum, natural gas, and crude oil. The data was collected on multiple international markets for periods from January 1, 2021 to November 30, 2023. The analysis was conducted using trend analysis and event study. The capital asset pricing model (CAPM) was adopted to run the event study analysis. The results indicated that immediately after the Russian invasion of Ukraine, major energy products such as US crude oil, European crude oil, and the global energy index experienced a sharp rise in price, followed by significant price volatility over the following up to seven months. The review of OPEC energy prices also indicated an increase in prices, and volatility was experienced in countries producing and exporting oil products. The event study further revealed that there was a sharp increasing trend immediately after the event date and an upward trend for more than ten months after the event, resulting in the highest prices recorded in the event window. The study suggested three policy implications - conflict should serve as a wake-up call on diversification of energy sources, investment in alternative, sustainable and green sources of energy to reduce the dependence on oil, and promotion of international cooperation on energy security.

Alternative products for breaking dormancy in ‘Reubennel’ plum in subtropical regions

Abstract Plum is a temperate fruit tree and thus shows abundant vegetative bud percentage and flowering following extended periods of low winter temperatures. When adequate periods of low temperatures do not occur, it is necessary to apply products to stimulate bud dormancy break and uniform leaf and flower appearance. This application is more frequently needed when plum trees are grown in the tropics. The objective of this study was to evaluate alternative products for breaking dormancy in ‘Reubennel’ plum in subtropical regions. The experiment was conducted at a site located at 22°22’S, 43°77’W and 1,173 m altitude, with a Cwa climate type. The following treatments were applied to eight-year-old ‘Reubennel’ plum trees in the 2018 and 2019 production cycles: 1) a negative standard composed of only water (control), a positive standard composed of 2) 1.5% hydrogen cyanamide (HC) (Dormex® commercial product) plus 4.5% mineral oil, 3) Erger G® organomineral fertilizer supplemented with 3% calcium nitrate, 4) 5% potassium nitrate and 5) 0.3% copper sulfate. Two liters of the treatment solutions were applied per plant with a sprayer. The effect of the tested products on vegetative bud percentage and flowering capacity, production cycle reduction and production and quality of ‘Reubennel’ plums was evaluated. It was concluded that the chemicals used to break dormancy affected only the phenology of plum trees in this subtropical region and that the application of copper sulfate can be used to break dormancy in these trees.

Revealing contaminants in China's recycled PET: Enabling safe food contact applications

The lack of data on chemical contamination in recycled polyethylene terephthalate (rPET) in food contact applications, impedes the legalization of rPET in food contact applications in China. This study offers a comprehensive analysis of contaminants in hot-washed rPET flakes, identifying 1011 compounds. While most substances were detected infrequently, some i.e., bis(2-ethylhexyl) phthalate and mineral oil aromatic hydrocarbons stood out for their relatively high average concentrations. Limonene emerged as the most frequently detected flavorants. Rare genotoxic compounds like safrole and diethyl sulfate were detected at low levels, emphasizing the importance of adopting a conservative evaluation approach. Molecular descriptor analysis guided the proposal of four new surrogates, i.e., dimethyl pentanedioate, 2-tridecanone, bis(2-ethylhexyl) terephthalate, and 2,2-dimethoxy-1,2-diphenylethanone, for challenge tests, aiming to better capture the chemical diversity of rPET contaminants. This research unveils the contamination profile of Chinese rPET and suggests adjustments to evaluation protocols, potentially facilitating its high-value applications and minimizing potential harms.

Impact of sol-gel synthesized α-aluminium oxide nanoparticles for the enhancement of transformer oil insulation properties

Transformers require advanced insulating materials that outperform mineral oil in terms of cooling, insulation effectiveness, eco-friendliness, and operational efficiency in extreme operational and weather conditions. As a result, emphasis has shifted to renewable and ecologically friendly materials. This change in emphasis is motivated by worries about the environment, fuel shortages, and the disposal of waste oil. Transformers have historically employed solid insulators like paper and pressboard as well as mineral or synthetic oil. However, the development of ecologically friendly insulating materials has been spurred by new environmental regulations as well as economic benefits. This research investigates the use of sol-gel synthesized aluminium oxide (Al2O3) nanoparticles to improve the insulation properties of host transformer oil. The synthesized aluminium nanoparticles were characterized with X-ray diffractometer (XRD) and found rhombohedral structure, whose chemical composition was studied by energy dispersive X-ray spectrum (EDAX). Investigation using Fourier transform infrared spectroscopy (FTIR) also revealed the production of AlOOH and hydroxyl vibrational bands at wavenumbers of 690 and 2976 cm−1, respectively. Studies using field emission scanning electron microscopy (FESEM) showed that the nanoparticles are spherical in form and have a diameter of around 38 nm. Additionally, the incorporation of α-aluminium oxide nanoparticles into the host oil showed an improvement in the breakdown voltage and suggested a possible use for better transformer oil insulation.

Performance of R134a vapour compression refrigeration system by using Gr and Al2o3 hybrid nano lubricants

Nowadays, in many developing countries like India they are facing the shortage of energy. The Refrigeration system has become the major consumer of energy for many industrial as well as household applications. So, it is the need to enhance the energy efficiency of the refrigeration systems. Performance of the refrigeration system can be improved either by increasing the rate of heat absorption in evaporator or by reducing the compressor power. Use of efficient lubricant oil can help to remove the heat generated in the compression process which leads to less power consumption. Development in Nanotechnology makes it possible to develop a new class of lubricant called nanolubricant, in which nanoparticles are added in base lubricant oil to enhance the thermal properties. The two step technique with ultrasonic agitation force is used tosynthesise stable nanolubricant. The present study investigates the performance of an R-134a refrigerant vapour compression refrigeration system using nanolubricant with different volume concentrations (0.05%, 0.075%, 0.1% and 0.2%) of Graphene/Aluminium nanoparticles to mineral oil (MO) experimentally. The result shows maximum enhancement in COP approximately as 85% for 0.075 % volume fraction Nano lubricant as compared to base fluid. Use of nanolubricant saves approximately 27% compressor power.

Comparison of Aging Effect of Ester Liquids and Mineral Oil in Semi-Uniform Field Geometry under Lightning Impulse Voltage and Standard Compliant AC Voltage Testing

Comparison of Aging Effect of Ester Liquids and Mineral Oil in Semi-Uniform Field Geometry under Lightning Impulse Voltage and Standard Compliant AC Voltage Testing

Assessing the lightning performance of sustainable GTL type dielectric liquids versus mineral oils and synthetic ester in a non-uniform electric field

This paper presents for the first time the results of complex comparative tests on the lightning performance of a wide range of sustainable electrical insulating liquids made in GTL (Gas-to-Liquids) technology. Three different GTLs are compared with conventional mineral oils (inhibited and uninhibited) as well as biodegradable synthetic ester. Tests are aimed to determine Lightning Impulse Breakdown Voltage (LIBV) and Acceleration Voltage (Va) at standard lightning impulse voltage of both polarities. Those are performed at 25 mm gap distance of point-sphere electrode setup representing non-uniform electric field distribution. In addition, light emission is studied as well. Results show that for the conditions of experiment LIBV values tend to be similar for all tested dielectric liquids with a slight advantage of mineral oils at negative polarity and GTL-I oil at positive polarity. In turn, in terms of Va, it was found that at negative polarity the GTL oils are, in general, fully comparable with a high grade inhibited mineral oil. The Va of GTLs is in the range 260–275 kV versus 255–260 kV that characterizes mineral oils. When considering positive polarity the GTL-I is slightly inferior to other hydrocarbons with Va equal to 195 kV versus 230–255 kV characterizing other GTLs and mineral oils. For both polarities tested synthetic ester has much lower acceleration voltage in relation to hydrocarbon liquids including GTLs, which constitutes a huge disadvantage of the ester. Although the studies are limited to only one gap distance and non-uniform electric field distribution, it can be stated that the GTLs are worth to be examined as alternative to mineral oil when considering LIBV and Va as the analysed quantities. In addition, a special added value of the performed measurements should be mentioned that the measurements confirmed that Va parameter may be a good dielectric indicator of a dielectric liquid performance, especially when examining new product introduced to the market.

Study on the relationship between high temperature oxidation and temperature rise rate of engine oil

Purpose The purpose of this paper is to study the relationship between high temperature oxidation and temperature rise rate of engine oil attempted to explore a new indicator to evaluate oil degradation. Design/methodology/approach Accelerated oxidation test combined with molecular simulation and road test is carried out in this paper. The temperature rise characteristics of mineral oil and synthetic oil under different oxidation temperatures (140°C, 155°C and 170°C) and time (50 h, 100 h, 150 h and 200 h) were determined by accelerated oxidation. The mechanism of temperature change characteristics of used oils was analyzed with molecular simulation. Two experimental vehicles carried six road tests with synthetic and mineral oil. Findings The results of this study show that the temperature rise rate of oxidized mineral and synthetic oil is higher than the new oil. The temperature rise rate is proportional to the oxidation time and oxidation temperature. The synthetic engine oil temperature rise rate is lower than that of the mineral engine oil. The same result was obtained in road tests. Molecular simulation verifies that small molecules were generated after oil oxidation which results in intermolecular friction and increased heat generation. Originality/value This paper indicates that temperature rise rate has potential to be taken as an indicator to evaluate oil oxidation which provides a new way for engine oil analysis. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0177/

Experimental studies on insulating oils for power transformer applications

Abstract In recent days, ester-based alternatives like natural and synthetic oils are preferred as an alternative to mineral oil by the power industry due to its higher bio-degradability, superior thermal conductivity, and fire resistance than mineral oil. In addition to this, blended oils are quite attractive because of its low dielectric loss and a low ratio of degradation. The present research deals with the experimental studies on different insulating oils like mineral oil, synthetic ester oil, coconut oil, blended oils, and nanofluids, which are developed from ZnO and TiO2 nanoparticle doped at 0.01 vol% in different insulating oils through ultrasonication process. In this experiment, the critical properties like electrical and physicochemical properties are examined according to International Electrotechnical Commission and American Society for Testing and Materials standards. Results show that ZnO and TiO2 nano-powder enhances the AC breakdown voltage (BDV), dielectric permittivity, and DC resistivity properties of different insulating oils with improved flash and fire resistance. Remarkably, it is found that mineral oil-based TiO2 nanofluid shows an enhancement of 55.8 % in AC BDV, 9.1 % in permittivity, and 15 % in flash resistance. Moreover, mineral oil based ZnO and TiO2 nanofluid results exhibit remarkable decrement in loss tangent with increased DC resistance property. Finally, it is observed that the influence of TiO2 nano-powder at 0.01 vol% remarkably enhances the electrical and physicochemical properties in different insulating oils compared to ZnO nanofluids. Hence, mineral oil and green insulating based synthetic ester oil (which is based on TiO2 nanofluids) have been considered as a potential candidate to make alternatives to traditional insulating oil for power transformer applications. The findings offer critical insights for the future of transformer insulation systems, guiding industry standards and fostering innovation in material science.

Study on the Influence of Sludge Biochemical Characteristics and Treatment Conditions on Rheological Properties

Abstract In response to the differences in the organic matter, oil and other components of temporary sludge stored in different storage areas of Shanghai Lao-gang, which affect the long-distance transportation of sludge, a full range sampling was conducted on the temporary sludge. Based on the results of solid content measurement, the pH value, mineral oil, total nitrogen, organic matter content, total oil and other six selected sludge samples were subjected to biochemical testing, and one sludge sample was selected for drying and concentration treatment. At the same time, sludge rheological tests were conducted on the biochemical testing sludge samples and the concentrated sludge samples, and the impact of sludge biochemical characteristics and sludge concentration on sludge rheological characteristics was compared and analyzed, which provide reference for the construction process of temporary sludge transportation.