Mildew Resistance Research Articles

Plant necrotrophic bacterial disease resistance phenotypes, QTL, and metabolites identified through integrated genetic mapping and metabolomics in Solanum species.

Most food crops are susceptible to necrotrophic bacteria that cause rotting and wilting diseases in fleshy organs and foods. All varieties of cultivated potato (Solanum tuberosum L.) are susceptible to diseases caused by Pectobacterium species, but resistance has been demonstrated in wild potato relatives including S. chacoense. Previous studies demonstrated that resistance is in part mediated by antivirulence activity of phytochemicals in stems and tubers. Little is known about the genetic basis of antivirulence traits, and the potential for inheritance and introgression into cultivated potato is unclear. Here, the metabolites and genetic loci associated with antivirulence traits in S. chacoense were elucidated by screening a sequenced S. tuberosum x S. chacoense recombinant inbred line (RIL) population for antivirulence traits of its metabolite extracts. Metabolite extracts from the RILs exhibited a quantitative distribution for two antivirulence traits that were positively correlated: quorum sensing inhibition and exo-protease inhibition, with some evidence of transgressive segregation, supporting the role of multiple loci and metabolites regulating these resistance-associated systems. Metabolomics was performed on the highly resistant and susceptible RILs that revealed 30 metabolites associated with resistance, including several alkaloids and terpenes. Specifically, several prenylated metabolites were more abundant in resistant RILs. We constructed a high-density linkage map with 795 SNPs mapped to 12 linkage groups, spanning a length of 1,507 cM and a density of 1 marker per 1.89 cM. Genetic mapping of the antivirulence and metabolite data identified five quantitative trait loci (QTLs) related to quorum sensing inhibition that explained 8-28% of the phenotypic variation and two QTLs for protease activity inhibition that explained 14-19% of the phenotypic variation. Several candidate genes including alkaloid, and secondary metabolite biosynthesis that are related to disease resistance were identified within these QTLs. Taken together, these data support that quorum sensing inhibition and exo-protease inhibition assays may serve as breeding targets to improve resistance to nectrotrophic bacterial pathogens in potato and other plants. The identified candidate genes and metabolites can be utilized in marker assisted selection and genomic selection to improve soft- rot and blackleg disease resistance.

Serum Galactomannan as a Minimally Invasive Diagnostic Tool for Fungal Skull Base Osteomyelitis.

Multidrug resistant strains and fungi add to treatment conundrums in skull base osteomyelitis (SBO). Deep tissue culture in these patients is challenging due to their advanced age and co-morbidities. Besides, fungal culture positivity is seen only in 60% of invasive aspergillosis. To determine the efficacy of a minimally invasive test-Serum Galactomannan (sGM)-for diagnosing fungal SBO. Prospective observational study. Thirty- three patients, clinically diagnosed with SBO were included in this study. Baseline ESR (Erythrocyte Sedimentation Rate), CRP (C- Reactive Protein), pain score, and sGM were noted for all patients. Antifungal Voriconazole was initiated on patients if the sGM values were more than 0.8. At the 12th week of treatment, all parameters were repeated and compared with the baseline values. A significant reduction was noted in ESR, CRP, and pain scores at the 12th week of treatment compared to the baseline values in patients with raised sGM values who were started on Voriconazole. For a culture-proven fungal skull base osteomyelitis with a cut-off value of sGM > / = 0.8, the obtained sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and accuracy were 81.82, 36.36, 39.13, 80 and 51.52% respectively. At a cut-off value of sGM > / = 01.6, the values of sensitivity/specificity, PPV, NPV and accuracy were 81.82/72.73%, 60%, 88.89% and 75.76%. Culture-negative patients in SBO with sGM value > 0.8 were more likely to be fungal SBO. An sGM cut-off of 1.6 was observed to give maximum accuracy for diagnosing fungal SBO.

Novel automated antifungal susceptibility testing system for yeasts based on dual-detection algorithm of turbidimetry and colorimetry.

Introduction. The increasing prevalence and growing resistance of fungi present a significant peril to public health. There are only four classes of antifungal medicines available today, and few candidates are in clinical trials.Hypothesis/Gap Statement. Rapid and sensitive diagnostic techniques are lacking for most fungal pathogens, and those that do exist are expensive or hard to obtain.Aim. This study aimed to evaluate the feasibility of a novel automated antifungal susceptibility testing system, Fungus AST, in comparison to the broth microdilution method (BMD) recommended by the Clinical and Laboratory Standards Institute (CLSI).Methodology. A total of 101 clinical Candida spp. isolates were collected from the Zengcheng Branch of Nanfang Hospital and subjected to antifungal susceptibility testing. Antifungal susceptibility was assessed using the Fungus AST method and the BMD.Results. In this study, we introduce a novel automated antifungal susceptibility testing system, Fungus AST, which detects the turbidity and/or colour intensity of microdilution wells using a four-wavelength detection technology in real time and is designed to match the growth characteristics of strains over time. Based on our analysis, all reportable ranges of Fungus AST were suitable for clinical fungal isolates in PR China. Within ±twofold dilutions, reproducibility was 100 %. Considering the BMD as a referenced method, ten antifungal agents (anidulafungin, caspofungin, micafungin, fluconazole, voriconazole, posaconazole, itraconazole, amphotericin B, 5-flucytosine and nystatin) showed an essential agreement of >95 %. The category agreement of five antifungal agents (anidulafungin, caspofungin, micafungin, fluconazole and voriconazole) was excellent at >90 %. One Candida albicans isolate and voriconazole showed a major error (ME) (1.7 %), and no other ME or very ME agents were found.Conclusion. Given the above, it can be argued that the utilization of Fungus AST is a discretionary automated approach. More improvements are needed in Fungus AST compared to the BMD system for a wider range of clinical isolates, including different types of fungi.

Status, Gaps and Perspectives of Powdery Mildew Resistance Research and Breeding in Cucurbits

Cucurbitaceae, the gourd family of flowering plants, is a very large and diverse family, the order Cucurbitales, contains 95 genera and 950–980 species of food and ornamental plants, and wild and weedy species mostly with high genetic diversity. This review is focused on the most important cucurbit crops (Cucumis sativus, Cucumis melo, Cucurbita spp., Citrullus lanatus, Momordica charantia, Lagenaria siceraria, and Luffa acutangula) and some their wild relatives as hosts of cucurbit powdery mildews (CPM). Powdery mildews (PM) (Ascomycota, Erysiphales) are one of the most frequently encountered and easily visible groups of plant pathogenic fungi with > 900 species. They are obligate biotrophs, they colonize above-ground plant tissues, mostly leaves, though they may also colonize stems, petioles, flowers and fruits, and they are usually debilitators, not killers. These parasitic fungi have been problematic on cucurbits for a long time world-wide, causing serious economic losses in yield and quality. All economically important cucurbit crops host CPM. Seven PM species with different taxonomic positions, host ranges, geographic distributions and ecological requirements are known on cucurbits. CPM species taxonomy and denomination rapidly changed during last few decades through detailed analyses and clarifications. At least three PM species frequently parasitize cucurbits: the endoparasite Leveillula taurica (Lt) with marginal economic importance; and two ectoparasitic species, Golovinomyces orontii (Go), and Podosphaera xanthii (Px), which are economically important world-wide. The two pathogens differ in ecological requirements and distribution, though they may occur together in mixed infections. They are highly variable at the population level for virulence, race identities, and fast adaptation of pathogens. Cucurbit-CPM species interactions are diverse and complicated, and differ between hosts and their respective pathogen genera and species. Here we present a critical overview of obstacles, gaps and recent progress in these matters for six cucurbit genera with respect to resistance resources, genetics of resistance, genetic mapping and development of molecular markers, physiology and mechanisms of resistance, developments in mlo-mediated resistance, patents, and CPM resistance breeding.

Screening and Identification of Heavy Metal Resistant Endophytic Fungi Isolated from Solanum nigrum and Heavy Metal Impact on Survivability of Earthworm

Aim: Heavy metals are hazardous for both human health and the environment. In order to create and maintain contamination free soil, many efforts are made to develop economically feasible technologies. This research article emphasizes on phytoremediation by endophytic fungi (Alternaria alternata) isolated from leaves of Solanum nigrum.
 Materials and Methods: The endophytic fungus was confirmed by 18S rRNA sequencing. Isolated endophytic fungi was screened individually for heavy metal tolerance at various concentrations to Lead acetate (Pb), Magnesium chloride (Mg), Cadmium sulphate (Cd) and Potassium dichromate (Cr).
 Results: The endophytic fungi Alternaria alternate showed greater tolerance against the heavy metal cadmium. The minimum inhibitory activity of the fungi against the heavy metals showed maximum inhibition towards cadmium up to 6000ppm. The metal tolerance index showed maximum growth of Alternaria alternate towards cadmium, followed by other heavy metals Bioaccumulation of heavy metals by the endophytic fungi also demonstrated high tolerance against cadmium (89%). To determine the survivability of earthworm, toxigenicity test was done, the cadmium treated Earthworm was motionless within few minutes after exposure to cadmium when compared with control.
 Conclusion: Thus, the study clearly indicates that the endophytic fungi is a boon to control environmental pollution and to retain soil fertility.

Exposure to resistant fungi across working environments and time

Antifungal resistance has emerged as a significant health concern with increasing reports of resistant variants in previously susceptible species. At present, little is known about occupational exposure to antifungal-resistant fungi. This study aimed to investigate Danish workers' occupational exposure to airborne fungi resistant to first-line treatment drugs. A retrospective study was performed on a unique collection of personal exposure samples gathered over a twenty-year period from Danish working environments, in sectors including agriculture, animal handling, waste management, and healthcare. A total of 669 samples were cultivated at 37 °C and fungal colonies were identified using MALDI-TOF MS. Subsequently, identification was confirmed by amplicon sequencing the genes of calmodulin and beta-tubulin to unveil potential cryptic species.Infectious fungi (495 isolates from 23 species) were tested for resistance against Itraconazole, Voriconazole, Posaconazole, and Amphotericin B. Working environments were highly variable in the overall fungal exposure, and showed vastly different species compositions. Resistance was found in 30 isolates of the species Aspergillus fumigatus (4 of 251 isolates), A. nidulans (2 of 13), A. niger complex (19 of 131), A. versicolor (3 of 18), and A. lentulus (2 of 2). Sequence analysis revealed several cryptic species within the A. niger complex including A. tubingensis, A. luchuensis, and A. phoenicis. Among the resistant A. fumigatus isolates, two contained the well-described TR34/L98H mutation in the cyp51A gene and promoter region, while the remainder harbored silent mutations.The results indicate that the working environment significantly contributes to exposure to resistant fungi, with particularly biofuel plant workers experiencing high exposure. Differences in the prevalence of resistance across working environments may be linked to the underlying species composition.

Maize requires arogenate dehydratase 2 for resistance to Ustilago maydis and plant development.

Maize (Zea mays) smut is a common biotrophic fungal disease caused by Ustilago maydis and leads to low maize yield. Maize resistance to U. maydis is a quantitative trait. However, the molecular mechanism underlying the resistance of maize to U. maydis is poorly understood. Here, we reported that a maize mutant caused by a single gene mutation exhibited defects in both fungal resistance and plant development. maize mutant highly susceptible to U. maydis (mmsu) with a dwarf phenotype forms tumors in the ear. A map-based cloning and allelism test demonstrated that 1 gene encoding a putative arogenate dehydratase/prephenate dehydratase (ADT/PDT) is responsible for the phenotypes of the mmsu and was designated as ZmADT2. Combined transcriptomic and metabolomic analyses revealed that mmsu had substantial differences in multiple metabolic pathways in response to U. maydis infection compared with the wild type. Disruption of ZmADT2 caused damage to the chloroplast ultrastructure and function, metabolic flux redirection, and reduced the amounts of salicylic acid (SA) and lignin, leading to susceptibility to U. maydis and dwarf phenotype. These results suggested that ZmADT2 is required for maintaining metabolic flux, as well as resistance to U. maydis and plant development in maize. Meanwhile, our findings provided insights into the maize response mechanism to U. maydis infection.

In situ retention of lignin-rich bamboo green effectively improves the surface properties of flattened bamboo

Bamboo has tremendous carbon sequestration potential, and bamboo green is underutilized. This work devised a green-keeping technique in bamboo flattening that preserved natural bamboo green in-situ. The impacts of flattening and green-keeping on bamboo morphology, chemical composition, physical qualities, and composite applications were examined. Bamboo cells were wrinkled after flattening, while bamboo green exhibited a more homogenous surface. Bamboo cellulose crystallinity increased after flattening, hemicellulose deteriorated little, and relative lignin content increased. The hydrophobicity and mildew resistance of the surface of G-FB (green-kept flattened bamboo board) were improved. Compared to untreated bamboo, FB and G-FB had 61.1 % and 49.5 % higher tensile strength and 8.0 % and 33.2 % higher MOR. G-FB-made flooring exhibited a MOR of 134.7 MPa and upgraded surface properties. Bamboo green preservation boosted utilization of materials and improved flattened bamboo's exterior surface without affecting lamination bonding. Simple bamboo green preservation multifunctionalizes flattened bamboo composites.

Evaluation and genetic dissection of the powdery mildew resistance in 558 wheat accessions

Powdery mildew, a widespread and destructive wheat disease caused by the fungal pathogen Blumeria graminis f. sp. tritici (Bgt), results in significant yield losses globally. Employing host resistance is the most cost-effective and environmentally sustainable approach to managing this disease. Assessing the resistance levels of wheat germplasms and understanding the genetic underpinnings of this resistance is crucial. In this study, we evaluated the seedling resistance to powdery mildew in 558 wheat accessions, along with the presence of resistance genes Pm1, Pm2, Pm4, Pm5, Pm6, Pm8, Pm12, Pm21, Pm24, Pm41, Pm42, Pm45, Pm47, Pm60, and Pm69 using various Bgt isolates and associated diagnostic markers. The study revealed that out of 558 wheat accessions tested, only 25 showed resistance to the Bgt isolate E09, highlighting a general lack of powdery mildew resistance among the evaluated accessions. Furthermore, these 25 accessions exhibited a significantly different resistance spectrum to 25 additional Bgt isolates. Notably, seven of these accessions were resistant to all the tested isolates, indicating they possess Pm genes with broad-spectrum resistance. Molecular analysis using closely linked or diagnostic markers revealed diverse resistance gene profiles: 249 accessions harbored a single tested Pm gene, 75 accessions possessed combinations of Pm genes, and 234 accessions lacked any of the tested genes. Pm8 was the most frequently detected gene, present in 27.42% of accessions, whereas Pm5, Pm12, Pm24, Pm41, Pm42, Pm45, Pm47 and Pm69 were not detected. Among the seven accessions resistant to all 26 tested isolates, Pm21 was detected in four accessions (HengS29, Chang 4640, Xinong 556, and ML728). Pm2 and Pm60 were identified in Emai 18 and Xinmai 296, respectively. Interestingly, none of the tested genes were detected in Emai 16, suggesting the presence of potentially novel Pm gene(s) conferring broad-spectrum resistance. These findings offer valuable insights for the strategic dissemination of these resistant accessions and for targeted breeding programs aimed at combating powdery mildew.

A mechanism study on the synergistic effects of rifapentine and fluconazole against fluconazole-resistant Candida albicans in vitro

Candida albicans (C. albicans) is one of the most common clinical isolates of systemic fungal infection. Long-term and inappropriate use of antifungal drugs can cause fungal resistance, which poses a great challenge to the clinical treatment of fungal infections. The combination of antifungal drugs and non-antifungal drugs to overcome the problem of fungal resistance has become a research hotspot in recent years. Our previous study found that the combination of rifapentine (RFT) and fluconazole (FLC) has a significant synergistic against FLC-resistant C. albicans. The present study aimed to further verify the synergistic effect between FLC and RFT against the FLC-resistant C. albicans 100, and explore the underlying mechanism. The growth curve and spot assay test not only showed the synergistic effect of FLC and RFT on FLC-resistant C. albicans in vitro but exhibited a dose-dependent effect on RFT, indicating that RFT may play a principal role in the synergic effect of the two drugs. Flow cytometry showed that the combined use of RFT and FLC arrested cells in the G2/M phase, inhibiting the normal division and proliferation of FLC-resistant C. albicans. Transmission electron microscopy (TEM) demonstrated that FLC at a low concentration could still cause a certain degree of damage to the cell membrane in the FLC-resistant C. albicans, as represented by irregular morphologic changes and some defects observed in the cell membrane. When FLC was used in combination with RFT, the nuclear membrane was dissolved and the nucleus was condensed into a mass. Detection of the intracellular drug concentration of fungi revealed that the intracellular concentration of RFT was 31–195 fold that of RFT alone when it was concomitantly used with FLC. This indicated that FLC could significantly increase the concentration of RFT in cells, which may be due to the damage caused to the fungal cell membrane by FLC. In short, the present study revealed a synergistic mechanism in the combined use of RFT and FLC, which may provide a novel strategy for the clinical treatment of FLC-resistant C. albicans.

Application of bulk segregant RNA-Seq (BSR-Seq) and allele-specific primers to study soybean powdery mildew resistance

BackgroundPowdery mildew (PM) is one of the important soybean diseases, and host resistance could practically contribute to soybean PM management. To date, only the Rmd locus on chromosome (Chr) 16 was identified through traditional QTL mapping and GWAS, and it remains unclear if the bulk segregant RNA-Seq (BSR-Seq) methodology is feasible to explore additional PM resistance that might exist in other varieties.ResultsBSR-Seq was applied to contrast genotypes and gene expressions between the resistant bulk (R bulk) and the susceptible bulk (S bulk), as well as the parents. The ∆(SNP-index) and G’ value identified several QTL and significant SNPs/Indels on Chr06, Chr15, and Chr16. Differentially expressed genes (DEGs) located within these QTL were identified using HISAT2 and Kallisto, and allele-specific primers (AS-primers) were designed to validate the accuracy of phenotypic prediction. While the AS-primers on Chr06 or Chr15 cannot distinguish the resistant and susceptible phenotypes, AS-primers on Chr16 exhibited 82% accuracy prediction with an additive effect, similar to the SSR marker Satt431.ConclusionsEvaluation of additional AS-primers in the linkage disequilibrium (LD) block on Chr16 further confirmed the resistant locus, derived from the resistant parental variety ‘Kaohsiung 11’ (‘KS11’), not only overlaps with the Rmd locus with unique up-regulated LRR genes (Glyma.16G213700 and Glyma.16G215100), but also harbors a down-regulated MLO gene (Glyma.16G145600). Accordingly, this study exemplified the feasibility of BSR-Seq in studying biotrophic disease resistance in soybean, and showed the genetic makeup of soybean variety ‘KS11’ comprising the Rmd locus and one MLO gene.

TaCRT3 Is a Positive Regulator of Resistance to Blumeria graminis f. sp. tritici in Wheat.

Wheat powdery mildew, caused by Blumeria graminis f. sp. tritici (Bgt), is one of the most prevalent diseases of wheat worldwide and can lead to severe yield reductions. Identifying genes involved in powdery mildew resistance will be useful for disease resistance breeding and control. Calreticulin (CRT) is a member of multigene family widely found in higher plants and is associated with a variety of plant physiological functions and defense responses. However, the role of CRT in wheat resistance to powdery mildew remains unclear. TaCRT3 was identified from the proteomic sequence of an incompatible interaction between the wheat (Triticum aestivum) cultivar Xingmin 318 and the Bgt isolate E09. Following analysis of transient expression of the GFP-TaCRT3 fusion protein in Nicotiana benthamiana leaves, TaCRT3 was localized in the nucleus, cytoplasm, and cell membrane. Transcript expression levels of TaCRT3 were significantly upregulated in the wheat-Bgt incompatible interaction. More critically, knockdown of TaCRT3 using virus-induced gene silencing resulted in attenuated resistance to Bgt in wheat. Histological analysis showed a significant increase in Bgt development in TaCRT3-silenced plants, whereas the pathogen-related gene was significantly downregulated in TaCRT3-silenced leaves. In addition, overexpression of TaCRT3 in wheat enhanced the resistance to powdery mildew, the growth of Bgt was significantly inhibited, and the area of H2O2 near the infection site and the expression of defense-related genes of the salicylic acid pathway significantly increased. These findings imply that TaCRT3 may act as a disease resistance factor that positively regulates resistance to powdery mildew, during which SA signaling is probably activated.

Mutagenesis of Wheat Powdery Mildew Reveals a Single Gene Controlling Both NLR and Tandem Kinase-Mediated Immunity.

Blumeria graminis f. sp. tritici (Bgt) is a globally important fungal wheat pathogen. Some wheat genotypes contain powdery mildew resistance (Pm) genes encoding immune receptors that recognize specific fungal-secreted effector proteins, defined as avirulence (Avr) factors. Identifying Avr factors is vital for understanding the mechanisms, functioning, and durability of wheat resistance. Here, we present AvrXpose, an approach to identify Avr genes in Bgt by generating gain-of-virulence mutants on Pm genes. We first identified six Bgt mutants with gain of virulence on Pm3b and Pm3c. They all had point mutations, deletions or insertions of transposable elements within the corresponding AvrPm3b2/c2 gene or its promoter region. We further selected six mutants on Pm3a, aiming to identify the yet unknown AvrPm3a3 recognized by Pm3a, in addition to the previously described AvrPm3a2/f2. Surprisingly, Pm3a virulence in the obtained mutants was always accompanied by an additional gain of virulence on the unrelated tandem kinase resistance gene WTK4. No virulence toward 11 additional R genes tested was observed, indicating that the gain of virulence was specific for Pm3a and WTK4. Several independently obtained Pm3a-WTK4 mutants have mutations in Bgt-646, a gene encoding a putative, nonsecreted ankyrin repeat-containing protein. Gene expression analysis suggests that Bgt-646 regulates a subset of effector genes. We conclude that Bgt-646 is a common factor required for avirulence on both a specific nucleotide-binding leucine-rich repeat and a WTK immune receptor. Our findings suggest that, beyond effectors, another type of pathogen protein can control the race-specific interaction between powdery mildew and wheat. [Formula: see text] Copyright © 2024 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

Reproducible Quantitative Trait Loci for Resistance to Soft Rot Caused by Dickeya dianthicola Derived from the Wild Potato Solanum microdontum (PI 458355) Are Located on Chromosomes 1, 3, and 5.

The potato wild relative Solanum microdontum is a breeder-friendly source of genetic resistance to soft rot. Our objectives were to (i) identify loci associated with soft rot resistance in S. microdontum germplasm and (ii) develop bi-parental populations in a self-compatible S. tuberosum genetic background to recover segregating F2 progenies, construct a linkage map, and identify quantitative trait loci (QTLs). Under objective (i), tubers from 103 S. microdontum genotypes from the United States Potato Genebank were inoculated with a high virulence strain of Dickeya dianthicola, and lesion size was measured after a 24-h incubation period at 30°C. Association analysis using 3,490 polymorphic Infinium array SNP markers identified soft rot resistance loci on chromosomes 1, 2, 3, 5, 7, 8, 11, and 12. Under objective (ii), a resistant S. microdontum accession PI 458355 was crossed with a highly fertile, self-compatible, diploid S. tuberosum pollen parent (PI 654351) to generate segregating F2 populations. Composite interval mapping was conducted using a genetic linkage map with 970 GBS-based SNP markers. Reproducible QTLs were detected on chromosomes 1, 3, and 5, explaining 11, 13, and 23% of the phenotypic variation, respectively. Homozygous S. microdontum alleles at the QTL on chromosome 5 and heterozygous or homozygous S. microdontum alleles at QTLs on chromosomes 1 and 3 significantly decrease lesion size compared with the homozygous S. tuberosum parent. The germplasm created in these studies provides a resource for studying traits from S. microdontum, and we can use the advanced F2 selections for future potato improvement. [Formula: see text] Copyright © 2024 The Author(s). This is an open access article distributed under the CC BY-NC-ND 4.0 International license.

Antifungal activity of 3,3'-dimethoxycurcumin (DMC) against dermatophytes and Candida species.

Dermatomycosis is an infection with global impacts caused especially by dermatophytes and Candida species. Current antifungal therapies involve drugs that face fungal resistance barriers. This clinical context emphasizes the need to discover new antifungal agents. Herein, the antifungal potential of 10 curcumin analogs was evaluated against four Candida and four dermatophyte species. The most active compound, 3,3'-dimethoxycurcumin, exhibited minimum inhibitory concentration values ranging from 1.9‒62.5to 15.6‒62.5µg ml-1 against dermatophytes and Candida species, respectively. According to the checkerboard method, the association between DMC and terbinafine demonstrated a synergistic effect against Trichophyton mentagrophytes and Epidermophyton floccosum. Ergosterol binding test indicated DMC forms a complex with ergosterol of Candida albicans, C. krusei, and C. tropicalis. However, results from the sorbitol protection assay indicated that DMC had no effect on the cell walls of Candida species. The in vivo toxicity, using Galleria mellonella larvae, indicated no toxic effect of DMC. Altogether, curcumin analog DMC was a promising antifungal agent with a promising ability to act against Candida and dermatophyte species.

Transcriptomic and Phytohormone Metabolomics Provide Insight into the Changes in Citrus limon Infected by Citrus yellow vein clearing virus

Background: Citrus yellow vein-clearing virus (CYVCV) is a Mandarivirus that causes great economic losses in lemon production. CYVCV infection is associated with obvious yellow vein-clearing disease symptoms and is directly regulated by plant hormone responses. Methods: To understand how lemon plants respond to CYVCV infection, we performed transcriptomic and phytohormone metabolomics. Results: A total of 936 differentially expressed genes were identified, and 773 were downregulated. Salicylic acid and auxin levels increased after CYVCV infection, and phytohormone regulatory systems were also explored. Jasmonic acid and auxin levels decreased after the CYVCV challenge, and jasmonic acid and auxin signaling pathway components were mostly downregulated. The differentially expressed genes (DEGs) involved in the immune response to viral infection, including those related to cell wall integrity, lectin, microtubules, and mildew resistance locus O (MLO), may also provide new candidate targets for CYVCV control. Conclusions: Our findings provide new insights into the molecular changes underlying the pathogenesis of CYVCV in lemon plants.

Borneol serves as an adjuvant agent to promote the cellular uptake of curcumin for enhancing its photodynamic fungicidal efficacy against Candida albicans

Candida albicans (C. albicans), a major opportunistic pathogenic fungus, is known to cause superficial skin infections. Unfortunately, the misuse of antibiotics has led to the emergence of drug resistance in fungi. Antimicrobial photodynamic therapy (aPDT), a non-antibiotic alternative, has shown potential in treating drug-resistant fungal infections. Curcumin is a photodynamically active phytochemical whose photodynamic fungicidal efficacy is largely dependent on its intracellular accumulation. However, curcumin faces challenges in penetrating the cytoplasm due to its poor water solubility and the fungal cell wall. Borneol, another monoterpenoid phytochemical, is known for its ability to enhance drug absorption. In this study, we showed that borneol improved the cellular uptake of curcumin, thereby enhancing its photodynamic fungicidal efficacy against C. albicans. This effect was attributed to borneol's ability to increase cell permeability. Transcriptomic analysis further confirmed that borneol disrupted the normal structure and function of the C. albicans cell wall and membrane, resulting in dysregulated mRNA expression of related genes and ultimately increased cell permeability. As a result, the excessive accumulation of curcumin in C. albicans triggered the overproduction of intracellular ROS upon exposure to blue light. These excessive intracellular ROS disrupted various cellular structures, interfered with essential cellular processes, inhibited biofilm formation and reduced virulence. Remarkably, borneol was also found to enhance curcumin uptake by C. albicans within biofilms, further enhancing the anti-biofilm efficacy of curcumin-mediated aPDT (Cur-aPDT). In conclusion, the results of this study strongly support the potential of borneol as an adjuvant agent to Cur-aPDT in treating superficial cutaneous fungal infections.

Sustainable adhesives for ultra-composites from biomass powder

Green adhesives with roborant performance are still a challenge. Here, we prepare a sustainable adhesive directly from biomass-based lignin and furfural in green deep eutectic solvent (DES, ChCl/urea), and then composite materials have been prepared by mixing the as-prepared adhesives with various kinds of biomass powder following a hot-pressing process. The composite material made from bamboo powder shows excellent multifunctional properties. The bending strength reaches 46.06 MPa while the bending modulus even exceeds 10 GPa, and it also has a super high internal bonding strength of 4.54 MPa. The composite also has excellent flame-retardant properties, with a flame-retardant grade of V0. In addition, the LCA-MB has high heat insulation, water resistance, thermal stability, and mildew resistance. In addition, the composite is not only biodegradable but also extremely low-cost, which is much cheaper than most petroleum-based plastics.

Powdery Mildew of Bigleaf Hydrangea: Biology, Control, and Breeding Strategies for Resistance

Hydrangea macrophylla, commonly known as bigleaf, garden, French, or florist hydrangea, is the most economically important member of the Hydrangea genus, with a breeding history spanning hundreds of years. Bigleaf hydrangea breeding improvement has largely focused on aesthetic traits and there are few varieties tolerant or resistant to major diseases such as powdery mildew. Powdery mildew is an obligate biotrophic Ascomycete in the order Erysiphales represented by approximately 900 species worldwide. The disease-causing agent in hydrangeas is Golovinomyces orontii (formerly Erysiphe polygoni DC), which tarnishes the beauty, growth, and salability of bigleaf hydrangea plants, especially those packed closely in production environments. Chemical or biological control is commonly used in production. A recently published haplotype-resolved genome of bigleaf hydrangea enables targeted analyses and breeding techniques for powdery mildew resistance. Analyzing transcriptomes of tolerant and susceptible hydrangeas through RNA sequencing will lead to the identification of differentially expressed genes and/or pathways. Concurrent application of marker-assisted selection, genetic transformation, and gene editing will contribute to the development of powdery-mildew-resistant varieties of bigleaf hydrangea. The aim of this review is to give a general overview of powdery mildew, its impact on bigleaf hydrangea, current control methods, molecular mechanisms, and breeding prospects for powdery mildew resistance in bigleaf hydrangea.

Gellan-Based Hydrogel as a Drug Delivery System for Caffeic Acid Phenethyl Ester in the Treatment of Oral Candida albicans Infections.

Candida albicans can cause various types of oral infections, mainly associated with denture stomatitis. Conventional therapy has been linked to high recurrence, toxicity, and fungal resistance, necessitating the search for new drugs and delivery systems. In this study, caffeic acid phenethyl ester (CAPE) and gellan gum (GG) were studied as an antifungal agent and carrier system, respectively. First, we observed that different GG formulations (0.6 to 1.0% wt/vol) were able to incorporate and release CAPE, reaching a controlled and prolonged release over 180 min at 1.0% of GG. CAPE-GG formulations exhibited antifungal activity at CAPE concentrations ranging from 128 to >512 µg/mL. Furthermore, CAPE-GG formulations significantly decreased the fungal viability of C. albicans biofilms at short times (12 h), mainly at 1.0% of GG (p < 0.001). C. albicans protease activity was also reduced after 12 h of treatment with CAPE-GG formulations (p < 0.001). Importantly, CAPE was not cytotoxic to human keratinocytes, and CAPE-GG formulations at 1.0% decreased the fungal burden (p = 0.0087) and suppressed inflammation in a rat model of denture stomatitis. Altogether, these results indicate that GG is a promising delivery system for CAPE, showing effective activity against C. albicans and potential to be used in the treatment of denture stomatitis.