Microring Resonator Research Articles

Frequency comb generation dynamics in χ(2) + χ(3) AlGaAs microresonators

We propose an AlGaAs microring resonator design for the generation of an optical frequency comb by means of the interplay between harmonic generation and Kerr effect. Modal phase matching imposes specific waveguide geometries and, consequently, it impacts the nonlinear efficiency of the system. We show the dynamics of χ(2) + χ(3) comb generation resulting from type-I modal phase matching.

Experimental demonstration of a flexible-grid 1 × (2 × 3) mode- and wavelength-selective switch using silicon microring resonators and counter-tapered couplers

Experimental demonstration of a flexible-grid 1 × (2 × 3) mode- and wavelength-selective switch using silicon microring resonators and counter-tapered couplers

Envelope fitting for real-time cascaded microring resonator’s output spectrum

Envelope fitting for real-time cascaded microring resonator’s output spectrum

Giant optical absorption of a PtSe2-on-silicon waveguide in mid-infrared wavelengths.

Low-dimensional platinum diselenide (PtSe2) is a promising candidate for high-performance optoelectronics in the short-wavelength mid-infrared band due to its high carrier mobility, excellent stability, and tunable bandgap. However, light usually interacts moderately with low-dimensional PtSe2, limiting the optoelectronic responses of PtSe2-based devices. Here we demonstrated a giant optical absorption of a PtSe2-on-silicon waveguide by integrating a ten-layer PtSe2 film on an ultra-thin silicon waveguide. The weak mode confinement in the ultra-thin waveguide dramatically increases the waveguide mode overlap with the PtSe2 film. Our experimental results show that the absorption coefficient of the PtSe2-on-silicon waveguide is in the range of 0.0648 dB μm-1 to 0.0704 dB μm-1 in a spectral region of 2200 nm to 2300 nm wavelengths. Furthermore, we also studied the optical absorption in an ultra-thin silicon microring resonator. Our study provides a promising approach to developing PtSe2-on-silicon hybrid optoelectronic integrated circuits.

Tuning refractive index change of SiNx induced by ultrafast laser pulses

We demonstrate the feasibility of femtosecond laser pulses to tune refractive index of SiNx, enabling direct writing waveguides in SiNx and reconfiguring microring resonators. The refractive index increases with pulse energy and pulse density.

Active Mode-Locking Optoelectronic Oscillator Based on a High-Q Microring Resonator (Invited)

Active Mode-Locking Optoelectronic Oscillator Based on a High-Q Microring Resonator (Invited)

Micro-Ring Resonator-Based Tunable Vortex Beam Emitter.

Light beams bearing orbital angular momentum (OAM) are used in various scientific and engineering applications, such as microscopy, laser material processing, and optical tweezers. Precise topological charge control is crucial for efficiently using vortex beams in different fields, such as information encoding in optical communications and sensor systems. This work presents a novel method for optimizing an emitting micro-ring resonator (MRR) for emitting vortex beams with variable orders of OAM. The MRR consists of a ring waveguide with periodic structures side-coupled to a bus waveguide. The resonator is tunable due to the phase change material Sb2Se3 deposited on the ring. This material can change from amorphous to crystalline while changing its refractive index. In the amorphous phase, it is 3.285 + 0i, while in the transition to the crystalline phase, it reaches 4.050 + 0i at emission wavelength 1550 nm. We used this property to control the vortex beam topological charge. In our study, we optimized the distance between the bus waveguide and the ring waveguide, the bending angle, and the width of the bus waveguide. The optimality criterion was chosen to maximize the flux density of the radiated energy emitted by the resonator. The numerical simulation results proved our method. The proposed approach can be used to optimize optical beam emitters carrying OAM for various applications.

Ultra-compact optical full-adder based on directed logic and microring resonators.

Photonic integrated circuits with compact design have opened possibilities for the development of optical computing systems; however, the overuse of photonic components in optical designs has slowed the progress of dense integration. In this paper, we propose an ultra-compact optical full-adder based on directed logic and microring resonators. To the best of our knowledge, the proposed structure requires fewer optical components than any other current designs, resulting in a significantly reduced footprint 59.2µm×29.2µm. Also, the proposed structure exhibits a maximum delay time of approximately 10ps, implying a minimum date rate of 100GHz. Simulation results by finite-difference time-domain (FDTD) demonstrate the effectiveness and feasibility of the proposed optical full-adder.

Polarization-entangled quantum frequency comb from a silicon nitride microring resonator

Polarization-entangled quantum frequency comb from a silicon nitride microring resonator

Dynamic Spectrum Assignment in Passive Optical Networks Based on Optical Integrated Microring Resonators Using Machine Learning and a Routing, Modulation Level, and Spectrum Assignment Method

The rising demand for bandwidth in optical communication networks has led to the need for more efficient solutions for spectrum allocation. This article presents a solution to enhance the capacity and efficiency of passive optical networks (PON) using optical microring resonators and dynamic spectrum allocation. The solution relies on wavelength division multiplexing (WDM). It proposes using a support vector machine (SVM) and a Routing, Modulation Level, and Spectrum Assignment (RMLSA) method to manage spectrum allocation based on the bandwidth and distance of multiple requests. The network employs a pulse shaper to physically allocate the spectrum, allowing for the separation of the spectrum generated by the microring resonators into different wavelengths or wavelength ranges (super-channel). Additionally, the SVM and RMLSA algorithms regulate the pulse shaper to execute the allocation. This photonic network achieves improved spectrum utilization and reduces the network blocking probability. Our proposal shows that we successfully addressed 1090 requests with a zero blocking probability, accounting for 81% of the total requests. These request scenarios can simultaneously accommodate up to 200 requests, with a maximum bandwidth of 31 THz. This highlights the efficacy of our approach in efficiently managing requests with substantial processing capacity.

Continuous entanglement distribution from an AlGaAs-on-insulator microcomb for quantum communications

Using an aluminum gallium arsenide microring resonator, we demonstrate a bright quantum optical microcomb with >300 nm (>40 THz) bandwidth and more than 20 sets of time–energy entangled modes, enabling spectral demultiplexing with simple, off-the-shelf commercial telecom components. We report high-rate continuous entanglement distribution for two sets of entangled-photon pair frequency modes exhibiting up to 20 GHz/mW2 pair generation rate. As an illustrative example of entanglement distribution, we perform a continuous-wave time-bin quantum key distribution protocol with 8 kbps sifted key rates while maintaining less than 10% error rate and sufficient two-photon visibility to ensure security of the channel. When the >20 frequency modes are multiplexed, we estimate >100 kbps entanglement-based key rates or the creation of a multi-user quantum communications network. The entire system requires less than 110 µW of on-chip optical power, demonstrating an efficient source of entangled frequency modes for quantum communications. As a proof of principle, a quantum key is distributed across 12 km of deployed fiber on the University of California Santa Barbara (UCSB) campus and used to encrypt a 21 kB image with <9% error.

Kerr-induced synchronization of a cavity soliton to an optical reference.

The phase-coherent frequency division of a stabilized optical reference laser to the microwave domain is made possible by optical-frequency combs (OFCs)1,2. OFC-based clockworks3-6 lock one comb tooth to a reference laser, which probes a stable atomic transition, usually through an active servo that increases the complexity of the OFC photonic and electronic integration for fieldable clock applications. Here, we demonstrate that the Kerr nonlinearity enables passive, electronics-free synchronization of a microresonator-based dissipative Kerr soliton (DKS) OFC7 to an externally injected reference laser. We present a theoretical model explaining this Kerr-induced synchronization (KIS), which closely matches experimental results based on a chip-integrated, silicon nitride, micro-ring resonator. Once synchronized, the reference laser captures an OFC tooth, so that tuning its frequency provides direct external control of the OFC repetition rate. We also show that the stability of the repetition rate is linked to that of the reference laser through the expected frequency division factor. Finally, KIS of an octave-spanning DKS exhibits enhancement of the opposite dispersive wave, consistent with the theoretical model, and enables improved self-referencing and access to the OFC carrier-envelope offset frequency. The KIS-mediated enhancements we demonstrate can be directly implemented in integrated optical clocks and chip-scale low-noise microwave generators.

Designing an ultra-compact SOI waveguide with a high nonlinear coefficient for generating optical frequency combs and demultiplexing combs

In this paper, an ultra-compact high capability silicon-based waveguide with a high nonlinear coefficient and engineered dispersion was designed for frequency combs generation and demultiplexing of these combs. In the first part of the structure, a silicon waveguide with two zero-dispersion wavelengths, 1552[Formula: see text]nm and 2350[Formula: see text]nm, and a length of 4[Formula: see text]mm was used to generate optical frequency combs using the four-wave mixing method. Considering the high nonlinear coefficient of [Formula: see text] in the waveguide, an input pump power of 500[Formula: see text]mW was applied to the waveguide at near-zero-dispersion wavelengths of 1552[Formula: see text]nm. The output comb spectrum of the waveguide was obtained after the length of 4[Formula: see text]mm with a spectral bandwidth of 400[Formula: see text]nm and a free spectral range of 5[Formula: see text]nm. Additionally, by similar pumping at wavelengths of 1553[Formula: see text]nm and 1555[Formula: see text]nm to this waveguide, optical frequency combs with a free spectral range of 2[Formula: see text]nm and a spectral bandwidth of 150[Formula: see text]nm were obtained. In the second part of the structure, to isolate the optical frequency combs, the given waveguide was expanded to generate an SOI demultiplexer with micro-ring resonator filters, which could separate optical frequency combs with the wavelength of 1555[Formula: see text]nm, 1557[Formula: see text]nm, 1559[Formula: see text]nm, and 1561[Formula: see text]nm due to the selection of suitable values for the radius of the ring resonators. The mean transmission efficiency, spectral bandwidth, and quality factor were obtained to be 99.51%, 0.275[Formula: see text]nm, and 5675, respectively. The channel spacing in the proposed demultiplexer was 2[Formula: see text]nm and the minimum and maximum crosstalk were −36[Formula: see text]dB and −11.3[Formula: see text]dB.

Thermo-Optic Response and Optical Bistablility of Integrated High-Index Doped Silica Ring Resonators.

The engineering of thermo-optic effects has found broad applications in integrated photonic devices, facilitating efficient light manipulation to achieve various functionalities. Here, we perform both an experimental characterization and a theoretical analysis of these effects in integrated microring resonators made from high-index doped silica, which have had many applications in integrated photonics and nonlinear optics. By fitting the experimental results with theory, we obtain fundamental parameters that characterize their thermo-optic performance, including the thermo-optic coefficient, the efficiency of the optically induced thermo-optic process, and the thermal conductivity. The characteristics of these parameters are compared to those of other materials commonly used for integrated photonic platforms, such as silicon, silicon nitride, and silica. These results offer a comprehensive insight into the thermo-optic properties of doped silica-based devices. Understanding these properties is essential for efficiently controlling and engineering them in many practical applications.

Bifurcation analysis of complex switching oscillations in a Kerr microring resonator.

Microresonators are micron-scale optical systems that confine light using total internal reflection. These optical systems have gained interest in the past two decades due to their compact sizes, unprecedented measurement capabilities, and widespread applications. The increasingly high finesse (or Q factor) of such resonators means that nonlinear effects are unavoidable even for low power, making them attractive for nonlinear applications, including optical comb generation and second harmonic generation. In addition, light in these nonlinear resonators may exhibit chaotic behavior across wide parameter regions. Hence, it is necessary to understand how, where, and what types of such chaotic dynamics occur before they can be used in practical devices. We study here the underlying mathematical model that describes the interactions between the complex-valued electrical fields of two optical beams in a single-mode resonator with symmetric pumping. Recently, it was shown that this model exhibits a wide range of fascinating behaviors, including bistability, symmetry breaking, chaos, and self-switching oscillations. We employ here a dynamical system approach to perform a comprehensive theoretical study that allows us to identify, delimit, and explain the parameter regions where different behaviors can be observed. Specifically, we present a two-parameter bifurcation diagram that shows how (global) bifurcations organize the observable dynamics. Prominent features are curves of Shilnikov homoclinic bifurcations, which act as gluing bifurcations of pairs of periodic orbits or chaotic attractors, and a Belyakov transition point (where the stability of the homoclinic orbit changes). In this way, we identify and map out distinctive transitions between different kinds of chaotic self-switching behavior in this optical device.

Analog Wavelength Locking in an Optical Single-Sideband Transmitter of a Millimeter-Wave Radio-Over-Fiber Link Featuring a Micro-Ring Resonator and a Heat-Pump-Controlled Laser

This paper presents a novel approach to addressing the issue of temperature-induced instability in an optical, single-sideband transmitter based on a micro-ring resonator (MRR) suitable for millimeter-wave (mmW) radio-over-fiber (RoF) communications. We propose utilizing the drop port of the MRR to provide a feedback signal to the closed-loop control (CLC) system. The latter serves to maintain the optimal alignment between the laser’s carrier and the MRR’s resonant wavelength, thus mitigating the adverse effects of chromatic-dispersion-induced power fading at the receiving end. Since the feedback information is extracted from the otherwise-wasted resonant energy at the drop port, the control system does not compromise the delicate optical signal at the through port. A CLC was synthesized, designed, and prototyped to provide real-time wavelength tuning of the heat-pump-controlled laser based on the feedback signal. Experimental evaluations demonstrate that the wavelength of the laser could be successfully locked to the MRR’s resonance with a wavelength dither of less than 0.004 nm (~491 MHz). This allowed us to limit the power-penalty deterioration to less than 2 dB for a RoF link with a 2.5-km standard telecommunication single-mode fiber (SMF), a modulation frequency of 37.8 GHz, and a carrier wavelength of 1563.97 nm (~191.820 THz). The proposed solution offers an alternative approach for the carrier and the MRR’s resonant wavelength interlocking without the need for complex photonics like thermo-optic or electro-optic structures to control the temperature or phase velocity, respectively.

Integration of large-extinction-ratio resonators with grating couplers and waveguides on GaN-on-sapphire at O-band.

Photonic integrated circuits (PICs) based on gallium nitride (GaN) platforms have been widely explored for various applications at C-band (1530 nm∼1565 nm) and visible light wavelength range. However, for O-band (1260 nm∼1360 nm) commonly used in short reach/cost sensitive markets, GaN-based PICs still have not been fully investigated. In this article, a microring resonator with an intrinsic Q-factor of ∼2.67 × 104 and an extinction ratio (ER) of 35.1 dB at 1319.9 nm and 1332.1 nm, is monolithically integrated with a transverse electric-polarized focusing grating coupler and a ridge waveguide on a GaN-on-sapphire platform. This shows a great potential to further exploit the optical properties of GaN materials and integrate GaN-based PICs with the mature GaN active electronic and optoelectronic devices to form a greater platform of optoelectronic-electronic integrated circuits (OEICs) for data-center and telecom applications.

Widely-tunable, multi-band Raman laser based on dispersion-managed thin-film lithium niobate microring resonators

Stimulated Raman scattering is an attractive way to extend the operation spectral range of optical sources. However, the spectral extension range of a tunable Raman laser is limited by the Raman frequency shift and pump tuning bandwidth. This makes it challenging to realize chip-scale, widely tunable Raman lasers, as on-chip lasers only provide limited pump power and tuning bandwidth. Here, we tackle this by dispersion engineering of a thin-film lithium niobate microring resonator, where its high-quality factor ( ~ 2.5 million) ensures a sub-milli-watt (0.8 mW) threshold for Raman lasing while its strong normal dispersion with suppressed avoided mode crossing restrains the competing Kerr comb generation process. Combining the multi-wavelength Raman gain response of lithium niobate and cascaded Raman lasing, we demonstrate a widely tunable Raman laser covering 1592–1955 nm, showing a 335-nm spectral extension range from a 94-nm-tuning-bandwidth pump laser. Our demonstration paves the way to realize chip-scale, widely-tunable Raman lasers.

High-resolution photonic-assisted microwave frequency identification based on an ultrahigh-Q hybrid optical filter

Photonic-assisted microwave frequency identification has been extensively studied in civil and defense applications due to its distinct features including wide frequency coverage, large instantaneous bandwidth, high frequency resolution, and immunity to electromagnetic interference. In this paper, we propose and experimentally demonstrate an approach for high-resolution frequency identification of wideband microwave signals by linearly mapping the microwave frequencies to the time delays of the optical pulses. In the proposed system, an ultrahigh-Q hybrid optical filter is a key component, which consists of a fiber ring resonator (FRR) and a silicon photonic racetrack micro-ring resonator (MRR). The FRR has an ultra-narrow bandwidth of 7.6 MHz and a small free spectral range (FSR) of 292.5 MHz, while the MRR has a bandwidth of 167.5 MHz and a large FSR of 73.8 GHz. By precisely matching the resonance wavelengths of the FRR and the MRR, a hybrid optical filter with an ultrahigh Q-factor and a large FSR is realized, which is much preferred to realizing a high resolution and a wide measurement range for microwave frequency identification. An experiment is performed and different types of microwave signals are identified. A frequency measurement range as broad as 33 GHz from 2 to 35 GHz, a frequency resolution as high as 15 MHz and a measurement accuracy as high as 5.6 MHz are experimentally demonstrated. The proposed frequency identification system holds great advantages including high frequency resolution, high measurement accuracy, and wide frequency coverage, which can find extensive applications in next-generation electronic warfare and cognitive radio systems.

Design and simulation of a multichannel sensing system for liquid refractometry based on integrated photonics

The paper proposes a new architecture for the photonic laboratory-on-a-chip sensing systems, where multiple sensors based on microring resonators (MRR) are fed by a MRR with low quality factor, working as a spectrum shaper. This architecture enables simultaneous intensity scanning of at least four MRR-based sensors on the silicon-on-insulator platform. We evaluated numerically the system’s sensitivity for various schemes of connecting the sensors and the spectrum shaper. The sensor’s sensitivity was 110 nm/RIU. The sensing system configuration largely determines its sensitivity, which reaches 1980 dB/RIU. The considered architecture may be useful for implementing fully integrated optical lab-on-a-chip structures, as well as distributed multichannel sensing systems.