Microring Resonator Research Articles

Scalable single-microring hybrid III-V/Si lasers for emerging narrow-linewidth applications.

Silicon photonics, compatible with large-scale silicon manufacturing, is a disruptive photonic platform that has indicated significant implications in industry and research areas (e.g., quantum, neuromorphic computing, LiDAR). Cutting-edge applications such as high-capacity coherent optical communication and heterodyne LiDAR have escalated the demand for integrated narrow-linewidth laser sources. To that effect, this work seeks to address this requirement through the development of a high-performance hybrid III-V/silicon laser. The developed integrated laser utilizes a single microring resonator (MRR), demonstrating single-mode operation with a side mode suppression ratio (SMSR) exceeding 45 dB, with laser output power as high as 16.4 mW. Moving away from current hybrid/heterogeneous laser architectures that necessitate multiple complex controls, the developed laser architecture requires only two control parameters. Importantly, this serves to streamline industrial adoption by reducing the complexity involved in characterizing these lasers, at-scale. Through the succinct structure and control framework, a narrow laser linewidth of 2.79 kHz and low relative intensity noise (RIN) of -135 dB/Hz are achieved. Furthermore, optical data transmission at 12.5 Gb/s is demonstrated where a signal-to-noise ratio (SNR) of 10 dB is measured.

Trapped Atoms and Superradiance on an Integrated Nanophotonic Microring Circuit

Interfacing cold atoms with integrated nanophotonic devices could offer new paradigms for engineering atom-light interactions and provide a potentially scalable route for quantum sensing, metrology, and quantum information processing. However, it remains a challenging task to efficiently trap a large ensemble of cold atoms on an integrated nanophotonic circuit. Here, we demonstrate direct loading of an ensemble of up to 70 atoms into an optical microtrap on a nanophotonic microring circuit. Efficient trap loading is achieved by employing degenerate Raman-sideband cooling in the microtrap, where a built-in spin-motion coupling arises directly from the vector light shift of the evanescent-field potential on a microring. Atoms are cooled into the trap via optical pumping with a single free space beam. We have achieved a trap lifetime approaching 700 ms under continuous cooling. We show that the trapped atoms display large cooperative coupling and superradiant decay into a whispering-gallery mode of the microring resonator, holding promise for explorations of new collective effects. Our technique can be extended to trapping a large ensemble of cold atoms on nanophotonic circuits for various quantum applications. Published by the American Physical Society 2024

LiNbO3-Based Synaptic Sensors via Microring Resonator Modulators

LiNbO₃-Based Synaptic Sensors via Microring Resonator Modulators

2D Graphene Oxide: A Versatile Thermo‐Optic Material

AbstractEfficient heat management and control in optical devices, facilitated by advanced thermo‐optic materials, are critical for many applications such as photovoltaics, thermal emitters, mode‐locked lasers, and optical switches. Here, a range of thermo‐optic properties of 2D graphene oxide (GO) films are investigated by precisely integrating them onto microring resonators (MRRs) with control over the film thicknesses and lengths. The refractive index, extinction coefficient, thermo‐optic coefficient, and thermal conductivity for the GO films with different layer numbers and degrees of reduction, as well as reversible reduction and enhanced optical bistability induced by the photo‐thermal effects, are comprehensively characterized. Experimental results show that the thermo‐optic properties of 2D GO films vary widely with the degree of reduction. In addition, significant anisotropy is observed for the thermo‐optic response, enabling efficient polarization‐sensitive devices. The versatile thermo‐optic response of 2D GO substantially expands the scope of functionalities and devices that can be engineered, making it promising for a diverse range of thermo‐optic applications.

Ultra-fast GST-based optical neuron for the implementation of integrated photonic neural networks

A fast-integrated optical neuron is proposed based on a micro-ring resonator structure. The GST phase change material is used in the MRR structure, and neuron switching is achieved by the electrical actuation of this material. The nonlinear activation function of the neuron is extracted through three-dimensional electrical and optical simulations. The neuron is then employed in a three-layer perceptron network using the extracted activation function, and its performance is examined in the classification of handwritten digits. The overall performance of the proposed neuron is compared with the previous optical neural networks. Simulations show an ultra-fast switching time of 200fs, which is one order of magnitude faster than the best-reported value, and an accuracy of 98.9% (in the classification of MNIST handwritten digits dataset) which is among the best results, while the estimated neuron footprint is relatively small.

Electro-optically tunable optical delay on a lithium niobate photonic chip.

An approach for continuous tuning of on-chip optical delay with a microring resonator is proposed and demonstrated. By introducing an electro-optically tunable waveguide coupler, the bus waveguide to the resonance coupling can be effectively tuned from the under-coupling regime to the over-coupling regime. The optical delay is experimentally characterized by measuring the relative phase shift between lasers and shows a large dynamic range of delay from -600 to 600 ps and an efficient tuning of delay from -430 to -180 ps and from 40 to 240 ps by only a 5 V voltage.

Dual-mode microring resonator for humidity sensing with temperature compensation

On-chip refractive index (RI) sensors, which use resonant shifts of micro-cavities to detect environment change, have the advantages of high sensitivity, real-time detection, and compact footprints. However, the cross-sensitivity of the temperature variation severely interferes with sensing results. In this paper, we present a dual-mode microring resonator (MRR) with a cladding layer of polyhexamethylene biguanide hydrochloride (PHMB) for relative humidity (RH) sensing to overcome the limitation. Specifically, the influences of the RH-induced RI change of the PHMB cladding and temperature variations on the effective RIs of TE0 and TE1 modes can be decoupled based on the transmission spectral measurements. Using this method, we have demonstrated the temperature-compensated RH sensing which achieved a maximum sensitivity of −54.7 pm/%RH and a limit of detection of 0.8 %RH under the room temperature condition. Besides, a computational model based on the sensing response of the device was proposed and verified, which demonstrated that the structure can accurately measure changes in RH and temperature simultaneously. Our methodology has the potential to become a new reference for developing on-chip RI sensors with temperature compensation.

Design and analysis of all-optical reversible adder and subtractor using silicon microring resonator

Design and analysis of all-optical reversible adder and subtractor using silicon microring resonator

On-chip silicon photonic micro-ring processor lights up optical image encryption.

Optical image encryption has long been an important concept in the fields of photonic network processing and communication. Here, we propose a convolution-like operation-based optical image encryption algorithm exploiting a silicon photonic multiplexing architecture to achieve content security. Particularly, the encryption process is completed in a 3 × 3 cross-shaped photonic micro-ring resonator (MRR) array on chip. For the first time, to the best of our knowledge, this algorithm encodes information in an integrated intensity modulation, effectively reducing the encoding difficulty. Moreover, the high reliability and scalability of optical encryption are ensured using both linear and nonlinear operations on photonic chips according to characteristics of MRRs. As the encryption and decryption experiments show, the image restoration accuracy of our optical encryption algorithm exceeds 99% under real system noise at the pixel level, indicating its noise-robust property. Meanwhile, the peak signal-to-noise ratios of the restored and encrypted images are >60 and <15 dB, respectively, revealing both the high accuracy of the restored image and the small correlation between the encrypted and original images. This work adds to the rapidly expanding field of optical image encryption on photonic chips.

Add-Drop Microring Resonator Switch With Positive/Negative Phase Tuning Using InGaAsP/Si Hybrid MOS Phase Shifter

Add-Drop Microring Resonator Switch With Positive/Negative Phase Tuning Using InGaAsP/Si Hybrid MOS Phase Shifter

Enhancing laser temperature stability by passive self-injection locking to a microring resonator.

We show a thermally stable self-injection DFB laser lock to a microring resonator system, increasing the range of temperature for which a laser stays within 100 MHz of the target frequency by a factor of 100. By including amplification in the feedback loop, the per-laser power dedicated to this locking was reduced. We further added a 2.2 km fiber spool to explore the remote locking performance of the system.

Polarization entanglement generation in silicon nitride waveguide-coupled dual microring resonators.

Polarization-entangled photon pair sources exhibiting nonlocal quantum correlations are crucial to developments of quantum computing, quantum communications, quantum cryptography, and quantum sensing technologies. On-chip polarization entanglement generation thus constitutes one enabling component for integrated quantum photonic circuits. Here, we present to our knowledge the first polarization-entangled photon pair sources in a silicon nitride platform for integrated quantum photonic circuits. We demonstrate the generation of a polarization-entangled state by adopting a configuration comprising dual microring resonators, with nearly degenerate transverse electric and transverse magnetic polarized cavity resonances for the two resonators coupled in series to a common bus waveguide. We measure two-photon interference and quantum state tomography to characterize the polarization entanglement of the generated state and to reconstruct the density matrix. Our experiments reveal a visibility of 96.4% ± 3.1% and of 86.7% ± 3.2% with the |H⟩ and |V⟩ bases, respectively (and a visibility of 89.4% ± 6.6% and 81.3% ± 7.3% with the |D⟩ and |A⟩ bases), and a fidelity of ∼75.7% from the tomographic reconstructed density matrix.

Micro-Ring Resonator Assisted Photothermal Spectroscopy of Water Vapor.

We demonstrated, for the first time, micro-ring resonator assisted photothermal spectroscopy measurement of a gas phase sample. The experiment used a telecoms wavelength probe laser that was coupled to a silicon nitride photonic integrated circuit using a fibre array. We excited the photothermal effect in the water vapor above the micro-ring using a 1395 nm diode laser. We measured the 1f and 2f wavelength modulation response versus excitation laser wavelength and verified the power scaling behaviour of the signal.

Invertible all-optical logic gate on chip.

We demonstrate an invertible all-optical gate on chip, with the roles of control and signal switchable by slightly adjusting their relative arrival time at the gate. It is based on the quantum Zeno blockade (QZB) driven by sum-frequency generation (SFG) in a periodically poled lithium niobate microring resonator. For two nearly identical nanosecond pulses, the later arriving pulse is modulated by the earlier arriving one, resulting in 2.4 and 3.9 power extinction between the two, respectively, when their peak powers are 1 mW and 2 mW, respectively. Our results, while to be improved and enriched, herald a new, to the best of our knowledge, paradigm of logical gates and circuits for exotic applications.

On-Chip Reconstructive Spectrometer Based on Parallel Cascaded Micro-Ring Resonators

In contrast to cumbersome benchtop spectrometers, integrated on-chip spectrometers are well-suited for portable applications in health monitoring and environmental sensing. In this paper, we have developed an on-chip spectrometer with a programmable silicon photonic filter by simply using parallel cascaded micro-ring resonators (MRs). By altering the transmission spectrum of the filter, multiple and diverse sampling of the input spectrum is achieved. Then, combined with an artificial neural network (ANN) model, the incident spectrum is reconstructed from the sampled signals. Each MR is coupled to adjacent ones, and the phase shifts within each MR can be independently tuned. Through dynamic programming of the phases of these MRs, sampling functions featuring diverse characteristics are obtained based on a single programmable filter with an adjustable number of sampling channels. This eliminates the need for a filter array, significantly reducing the area of the on-chip reconstructive spectrometer. The simulation results demonstrate that the proposed design can achieve the reconstruction of continuous and sparse spectra within the wavelength range of 1450 nm to 1650 nm, with a tunable resolution ranging from 2 nm to 0.2 nm, depending on the number of sampling states employed. This benefit arises from the programmable nature of the device. The device holds tremendous potential for applications in wearable optical sensing, portable spectrometry, and other related scenarios.

Development of hybrid photonic integrated wavelength-tunable laser at 2 µm and its application to FMCW LiDAR.

This paper reports on the experimental demonstration of a fully integrated frequency-modulated continuous-wave (FMCW) LiDAR sensing system, operating at 2.0 µm. It makes use of a widely tunable hybrid external cavity laser based on the combination of GaSb gain chip and silicon waveguide circuits. The single-frequency laser operation over the full spectral bandwidth of the gain chip is secured using a frequency-selective filter, consisting of two sequential microring resonators in a Vernier configuration. To increase the mode-hop free wavelength tuning range while preserving the linewidth of the laser, the heater of the phase section placed along the bus waveguide is synchronously controlled with two independent heaters placed on each microring resonator. This laser is then implemented for the development of an FMCW LiDAR, consisting of all-optical fiber-based two independent unbalanced Mach-Zehnder interferometers: k-space interferometer for the linearization of continuously swept laser frequency and main interferometer for the measurement of the distributed back-reflection over the distance. The optical frequency of the laser is continuously swept over a ∼100 GHz range (or Δλ=1.47 nm at the operating wavelength) at a modulation speed of 100 Hz. Using this wavelength tunable laser, a light detection and ranging system (LiDAR) is experimentally demonstrated, showing a very high axial resolution of 1.36 mm in air with an extremely high precision of ∼9 µm at a 100 Hz measurement rate.

Deterministic quasi-continuous tuning of phase-change material integrated on a high-volume 300-mm silicon photonics platform

Programmable photonic integrated circuits (PICs) consisting of reconfigurable on-chip optical components have been creating new paradigms in various applications, such as integrated spectroscopy, multi-purpose microwave photonics, and optical information processing. Among many reconfiguration mechanisms, non-volatile chalcogenide phase-change materials (PCMs) exhibit a promising approach to the future very-large-scale programmable PICs, thanks to their zero static power and large optical index modulation, leading to extremely low energy consumption and ultra-compact footprints. However, the scalability of the current PCM-based programmable PICs is still limited since they are not directly off-the-shelf in commercial photonic foundries now. Here, we demonstrate a scalable platform harnessing the mature and reliable 300 mm silicon photonic fab, assisted by an in-house wide-bandgap PCM (Sb2S3) integration process. We show various non-volatile programmable devices, including micro-ring resonators, Mach-Zehnder interferometers and asymmetric directional couplers, with low loss (~0.0044 dB/µm), large phase shift (~0.012 π/µm) and high endurance (>5000 switching events with little performance degradation). Moreover, we showcase this platform’s capability of handling relatively complex structures such as multiple PIN diode heaters in devices, each independently controlling an Sb2S3 segment. By reliably setting the Sb2S3 segments to fully amorphous or crystalline state, we achieved deterministic multilevel operation. An asymmetric directional coupler with two unequal-length Sb2S3 segments showed the capability of four-level switching, beyond cross-and-bar binary states. We further showed unbalanced Mach-Zehnder interferometers with equal-length and unequal-length Sb2S3 segments, exhibiting reversible switching and a maximum of 5 (N+1,N=4\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$N+1,N=4$$\\end{document}) and 8 (2N,N=3\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${2}^{N},N=3$$\\end{document}) equally spaced operation levels, respectively. This work lays the foundation for future programmable very-large-scale PICs with deterministic programmability.

Dual-function optical modulation and detection in microring resonators integrated graphene/MoTe2 heterojunction

On-chip photonic devices such as modulators and photodetectors are essential building blocks for integrated photonics, enabling a wide range of applications in optical communication, sensing, and other emerging fields. Generally, optical modulation and photodetection are accomplished by two discrete devices in integrated photonic circuits, prohibiting the expansion of device functionality and the miniaturization of photonic systems. In this work, we demonstrate graphene/MoTe2 heterojunction integrating with microring resonators (MRRs) to serve as an optical modulator under positive bias voltage and a photodetector under negative bias voltage at the telecom band. Such a device primarily benefits from graphene's optoelectronic characteristics, including broadband absorption and electrostatically tunable refractive index. The obtained dual-functional MoTe2/graphene heterojunction devices demonstrate a modulation depth of ∼26.7 dB, a bandwidth of 7.0 GHz, and a self-driven, wavelength-sensitive optoelectronic response at the telecom C band. Our studies indicate that combining graphene van der Waals heterojunction with MRRs paves the way to emerging photonic applications such as neuromorphic computing while expanding the freedom for miniaturized photonic circuits.

On-Chip Demodulation Approach Based on Microring Resonator for Fiber-Optic Vernier Effect Sensing

On-Chip Demodulation Approach Based on Microring Resonator for Fiber-Optic Vernier Effect Sensing

Numerical Analysis of All-Optical Binary to Gray Code Converter Using Silicon Microring Resonator

Numerical Analysis of All-Optical Binary to Gray Code Converter Using Silicon Microring Resonator