Microplastics In Samples Research Articles

Source traceability of microplastics in road dust using organic/inorganic plastic additives as chemical indicators

Microplastics (MPs) are environmental pollutants of great concern around the world. The source of MPs in road dust need to be identified to develop strategies to control and reduce MPs emissions by stormwater runoff, one of the main sources of MPs to the aquatic environment. However, little information on the sources of MPs in road dust is available due to lack of their suitable indicators. In this study organic/inorganic plastic additives were used as chemical indicators to understand the source of MPs in road dust. The polymers, organic additives, and heavy metals in 142 commercial plastic products suspected of being source of MPs in road dust were determined. As the results, 147 organic additives and 17 heavy metals were identified, and different additive profiles were found for different polymer types and use application of plastic products. Further, 17 road dust samples were collected from an urban area in Kumamoto City, Japan. and analyzed the MPs (1–5 mm diameter) and their additive chemicals. Polymethyl methacrylate (PMMA) was the dominant polymer accounting for 86 % in the samples, followed by ethylene vinyl acetate (EVA) and polyvinyl chloride (PVC). In total, 48 organic additives and 14 heavy metals were identified in the MPs samples. The organic/inorganic additive profiles of plastic products and MPs in road dust were compared, and several road dust-associated MPs had similar additive profiles to road paints, braille blocks, road marking sheets, and reflectors. This suggested that the MPs were originated from these plastics on the road surface. Road paint was the most important contributor of MPs in road dust (60 % of the MPs), followed by braille block (23 %), road marking sheet (8.3 %), and reflector (2.4 %). These results indicated that organic/inorganic plastic additives in plastic products can be used as chemical indicators to trace the sources of MPs in road dust.

Size Distributions of Microplastics in the St Louis Estuary and Western Lake Superior.

Identifying the sources and fate of microplastics in natural systems has garnered a great deal of attention because of their implications for ecosystem health. This work characterizes the size fraction, morphology, color, and polymer composition of microplastics in western Lake Superior and its adjacent harbor sampled in August and September 2021. The results reveal that the overall microplastic counts are similar, with the harbor stations ranging from 0.62 to 3.32 microplastics per liter and the lake stations ranged from 0.83 to 1.4 microplastics per liter. However, meaningful differences between the sample locations can be seen in the size fraction trends and polymer composition. Namely, the harbor samples had relatively larger amounts of the largest size fraction and more diversity of polymer types, which can be attributed to the urbanized activity and shorter water residence time. Power law size distribution modeling reveals deviations that help in the understanding of potential sources and removal mechanisms, although it significantly underpredicts microplastic counts for smaller-sized particles (5-45 μm), as determined by comparison with concurrently collected microplastic samples enumerated by Nile Red staining and flow cytometry.

Microplastic contamination in Ashtamudi Lake, India: Insights from a Ramsar wetland

Estuaries function as temporary storage sites for plastic debris, influencing the distribution of microplastics (MPs) across ecosystems. This research delves into the presence of MPs in the water, sediment, fish, and shellfish of Ashtamudi Lake, a Ramsar wetland with brackish water located on the southwest coast of India. Given the lake's significance in supporting the livelihoods of numerous fishers and acting as a vital source of fishery resources for both local consumption and export, examining the contamination of the system by MPs becomes particularly pertinent. The highest percentage composition of MPs was found in macrofauna at 60.6% (with fish at 19.6% and shellfish at 40.9%), followed by sediment (22.8%) and water (16.7%). The primary types of MPs identified in all samples were fibers (35.6%), fragments (33.3%), and films (28%), with beads being the least represented at 3.03%. ATR-FTIR and Raman spectra analysis identified five polymers from shellfish (polypropylene, polyethylene, polystyrene, nylon, and polyvinyl chloride), five from fish guts (nylon, polypropylene, polyethylene, polyurethane, and polysiloxane), four in sediment (polypropylene, polyethylene, nylon, rayon), and four in water samples (polypropylene, polyethylene, nylon, and polystyrene). SEM-EDAX analysis of MPs obtained from the samples revealed degradation and the presence of inorganic elements such as Na, Mg, Al, Si, S, K, Cl, P, and Ca, as well as heavy metals like Pb, Mo, Rh, Pd, Ti, and Fe. The existence of these plastic polymers and heavy metals in microplastic samples poses a threat to vulnerable biota; people consume contaminated fish and shellfish, underscoring the importance of monitoring MPs in lake water. This investigation of MPs in Ashtamudi Lake highlights the system's susceptibility to plastic pollution and the bioavailability of smaller MPs to aquatic organisms. Identified sources of MPs in the lake include fishing and aquaculture activities, sewage pollution, improper solid waste management in lake watersheds, and unsustainable tourism. Upstream and downstream management interventions are recommended to address MP pollution in Ashtamudi Lake.

Innovative methods for microplastic characterization and detection: Deep learning supported by photoacoustic imaging and automated pre-processing data

Plastic products' widespread applications and their non-biodegradable nature have resulted in the continuous accumulation of microplastic waste, emerging as a significant component of ecological environmental issues. In the field of microplastic detection, the intricate morphology poses challenges in achieving rapid visual characterization of microplastics. In this study, photoacoustic imaging technology is initially employed to capture high-resolution images of diverse microplastic samples. To address the limited dataset issue, an automated data processing pipeline is designed to obtain sample masks while effectively expanding the dataset size. Additionally, we propose Vqdp2, a generative deep learning model with multiple proxy tasks, for predicting six forms of microplastics data. By simultaneously constraining model parameters through two training modes, outstanding morphological category representations are achieved. The results demonstrate Vqdp2's excellent performance in classification accuracy and feature extraction by leveraging the advantages of multi-task training. This research is expected to be attractive for the detection classification and visual characterization of microplastics.

Microplastic and other anthropogenic microparticles in Arctic char (Salvelinus alpinus) and their coastal habitat: A first-look at a central Canadian Arctic commercial fishery

In the recent monitoring guidelines released by the Arctic Monitoring and Assessment Program's Litter and Microplastic Expert Group, Arctic salmonids were recommended as an important species for monitoring plastics in Arctic ecosystems, with an emphasis on aligning microplastic sampling and analysis methods in Arctic fishes. This recommendation was based on the minimal documentation of microplastics in Northern fishes, especially Arctic salmonids. In response, we worked collaboratively with local partners to quantify and characterize microplastics in Arctic char, Salvelinus alpinus, and their habitats in a commercial fishery near Iqaluktuuttiaq (Cambridge Bay), Nunavut. We sampled Arctic char, surface water, and benthic sediments within their summer foraging habitat at Palik (Byron Bay). We found microplastics in 95 % of char with an average of 26 (SD ± 19) particles per individual. On average, surface water samples had 23 (SD ± 12) particles/L and benthic sediment <1 particles/gww. This is the first documentation of plastic pollution in Arctic char and their coastal habitats. Future work should evaluate seasonal, temporal and spatial trends for long-term monitoring of microplastics in Arctic fishes and their habitats.

Exploring changes in microplastic-associated bacterial communities with time, location, and polymer type in Liusha Bay, China

Microplastics have become a widespread concern within marine environments and are particularly evident in aquaculture regions that are characterized by plastic accumulation. This study employed 16 S rDNA sequencing to investigate the dynamic succession of microbial communities colonizing polyvinyl chloride (PVC), polystyrene (PS), and polyamide (PA) microplastics in seawater, when subjected to varying exposure durations in the Liusha Bay aquaculture region. Results revealed that the composition of microplastics microbial communities varied remarkably across geographical locations and exposure times. With an increase in exposure duration, both the diversity and richness of bacterial communities colonizing microplastics significantly increased, microbial communities show adaptations to the plastisphere. The type of microplastics had a significant effect on the community structure characteristicsof bacteria attached to their surfaces, with inconsistent trends in the relative abundance of different genera on different substrates. Notably, microplastic surfaces harbored a significant abundance of hydrocarbon-degrading bacteria, exemplified by Erythrobacter. These findings underscore the potential of microplastics as unique microbial niches. Meanwhile, long-term exposure experiments also offer the possibility of screening for plastic-degrading bacteria. In addition, the presence of the pathogenic bacterium Vibrio was detected in all microplastic samples, implying that microplastics could serve as carriers for pathogenic dissemination. This underscores the urgency of addressing the risk posed by the proliferation of harmful bacteria on microplastic surfaces. Overall, this study enhances our understanding of microbial community dynamics on microplastics under diverse conditions. It contributes to the broader comprehension of plastisphere microbial ecosystems in the marine environment, thereby addressing critical environmental implications.

Current State of Knowledge About Plastics' Ability to Sorption

Plastic pollution is and will be a problem for humanity to deal with for decades to come. The main cause for concern is plastic debris of microsizes, that has been detected in many worrying locations, e.g. human body. Microplastic can carry many substances. It’s possible for many substances, including toxins, to accumulate on plastic surface. This review pertains to the compilation of the newest scientific information regarding plastic’s ability to sorption. The methodological approach as well as mathematical models used in studies pertaining to this topic have been demonstrated. The type of plastic, the matrix and state of microplastic sample have been described to be affecting sorption on plastic. Some problems with methodology in compiled sorption studies have been outlined. It was concluded that more research is needed to be done to fully grasp this topic.

High throughput application of ASTM D8332: Detailed prototype design and operating conditions for microplastic sampling of riverine systems

Microplastic sampling strategies for aquatic systems commonly employ small mesh nets to collect suspended microparticles. These methods work well for marine sampling campaigns; however, complex water systems such as freshwater rivers, effluent discharges, and stormwater ponds characterized by high total suspended solids and fast-moving water can cause the nets to clog, rip, or tear. Published in 2020, ASTM D8332 is an alternative approach to sampling complex water systems for microplastics involving pumping large volumes of water across a cascading stack of sieves to collect suspended particles. Here we show that ASTM D8332 can be applied to sample freshwater rivers for microplastic collection. A high throughput sampling prototype developed in this work is capable of pumping 1500 L of river water in 45 min to collect particles as small as 45 µm. The system is lightweight, modular, and easily transportable. It has a discrete power supply, allowing for the collection of microplastics anywhere along the river, including municipal discharges. The design minimizes the amount of plastic in the flow path and provides a practical way to measure field contamination. Finally, we outline lessons learned through extensive field trials and testing using this system sampling the North Saskatchewan River in Edmonton, Alberta.•Existing small mesh nets face limitations in freshwater rivers, encountering clogging and tearing issues from high suspended solids and fast moving water.•Using a standardized method, ASTM D8332 - a pumping-based approach is efficient for microplastic collection in freshwater rivers.•Lightweight, modular, plastic free prototype system pumps 1500 L of river water in 45 min, collecting particles as small as 45 µm. Successfully tested in the North Saskatchewan River.

Microplastic pollution in landfill soil: Emerging threats the environmental and public health.

Insufficient knowledge about the decomposition of microplastics from plastic waste in landfills hinders community involvement in waste management and sorting, posing a new threat to the environment and public health. The present study identifies, characterizes, and quantifies the microplastics in landfills soil sample to determine the latest threats posed by microplastics in the environment, particularly in landfills that are close to residential areas. This research is a descriptive study, with soil samples taken from six points in landfill site in Depok City. The abundance and shape of microplastics were characterized using a microscope, while the microplastic types were identified using Fourier Transform Infrared Spectroscopy (FTIR). The results showed that the abundance of microplastics in the Depok City landfill soil was 60,111.67 particles/kg, with the largest percentage being fragments at 63 %. FTIR functional group characterization showed the presence of plastic types, such as Polyethylene (PE), Polyvinyl Chloride (PVC), Polystyrene (PS), Polypropylene (PP), Polyethylene Terephthalate (PET), and Polyamide. The differences in waste types entering the Depok Landfill caused variations in the number, shape, and type of microplastic samples, and this study provides a foundation for mitigating and biodegrading microplastics in the landfill to minimize environmental impact and protect public health.

Spectral analysis of environmental microplastic polyethylene (PE) using average spectra

In this study, microplastic samples from surface seawater of Tokyo Bay were collected, polyethylene (PE) microplastics were used to calculate carbonyl index (CI), and average spectra of PE were analyzed and compared with a previous study applying agitation during chemical treatment. It was found that PE and polypropylene (PP) were the predominant polymer type in the samples. Among PE samples, fragments were the most commonly observed shape, with white being the dominant color. Deviations were found in the average spectra among different shapes and colors when compared to the standard PE spectrum. A comparison of the average spectra between the two datasets suggests that pronounced peaks related to oxidation are most likely resulted from agitation during the chemical treatment. Additionally, it was found a closer spectral resemblance between the sample spectra and the spectrum of standard sample of oxidized PE (PEOx) than with the standard PE spectrum, suggesting that using the oxidized PE as a reference spectrum might be more effective for identification. These findings highlight the complex factors affecting the spectral properties of microplastics and highlight the importance of understanding these variations to enhance the accuracy of microplastic identification workflows and understanding of environmental fate of microplastics.

Use of an uncrewed surface vehicle and near infrared hyperspectral imaging for sampling and analysis of aquatic microplastics

Data on MP in aquatic environments have low resolution in space and time. Scaling up sampling and increasing analysis throughput are the main bottlenecks. We combined two approaches: an uncrewed surface vehicle (USV) and near infrared hyperspectral imaging (NIR-HSI) for sampling and analysis of MP > 300 μm. We collected 35 water samples over 4 d in a coastal area. Samples were analyzed using NIR-HSI and Fourier transform infrared spectroscopy (FTIR). Spiked samples were used to determine recovery. We conclude that using a USV can mitigate issues of traditional trawls like scalability, repeatability, and contamination. NIR-HSI detects more polyethylene but less polypropylene than FTIR analysis and reduces analysis time significantly. Highly variable concentrations were found at both sampling locations, with mean MP concentration of 0.28 and 0.01 MP m-3 for location A and B respectively. USV sampling in tandem with NIR-HSI is an effective analytical pipeline for MP monitoring.

Sea surface microplastics in the Galapagos: Grab samples reveal high concentrations of particles

Plastic pollution in the oceans is increasing, yet most global sea surface data is collected using plankton nets which limits our knowledge of the smaller and more bioaccessible size fraction of microplastics (<5 mm). We sampled the biodiverse coastal waters of the Galapagos Island of San Cristobal, comparing two different microplastic sampling methodologies; 1 l whole seawater grab samples filtered to 1.2 μm and sea surface plankton tows with a net mesh size of 200 μm. Our data reveal high concentrations of microplastics in Galapagos coastal waters surrounding the urban area, averaging 11.5 ± 1.48 particles l−1, with a four-order of magnitude increase in microplastic abundance observed using grab sampling compared with 200 μm plankton nets. This increase was greater when including anthropogenic cellulose particles, averaging 19.8 ± 1.86 particles l−1. Microplastic and anthropogenic cellulose particles smaller than 200 μm comprised 44 % of the particles from grab samples, suggesting previous estimates of microplastic pollution based on plankton nets likely miss and therefore underestimate these smaller particles. The particle characteristics and distribution of these smaller particles points strongly to a local input of cellulosic fibres in addition to the microplastic particles transported longer distances via the Humbolt current found across the surface seawater of the Galapagos. Improving our understanding of particle characteristics and distributions to highlight likely local sources will facilitate the development of local mitigation and management plans to reduce the input and impacts of microplastics to marine species, not just in the Galapagos but globally.

A comprehensive assessment of macro and microplastics from Rivers Ganga and Yamuna: Unveiling the seasonal, spatial and risk factors

There have been growing apprehensions and concerns regarding the increasing presence of plastic pollutants in the holiest river of India, the Ganga, and its major tributary, Yamuna. In response to this issue, the current study aimed to conduct a comprehensive investigation of the seasonal and spatial distribution of macro to microplastics (MPs) in the surface water, water column, and sediments from the River Ganga and Yamuna. MP samples were collected from various points of these Rivers, including upstream, downstream, and drainage points around the vicinity of Haridwar, Agra, Prayagraj, and Patna cities. With a significant seasonal variation, the estimated MPs and plastic flux were higher during the wet season than during the dry season. MPs sized 300 µm-1 mm and fibre-shaped blue and black colored MPs were pre-dominant in both rivers. Polyacrylamide, polyamide, and polyvinyl chloride were the most ascertained polymers. MPs including hazardous polymers (hazard score >1000) may pose a risk to the population of Indo-Gangetic Plain via direct and indirect exposure to MPs. The information provided in this study could serve as a starting point for the action plan required by municipal corporations to mitigate plastic pollution and target the possible sources at each location.

Plastic-less equipment for sampling marine microplastics

Marine microplastics have become a pernicious global pollution issue. As field surveys to determine microplastic abundance in the marine environment and/or biota become more common, it is important to refine collection techniques to minimize contamination of samples. However, most contemporary sampling equipment is fabricated with plastic components. Microplastic contamination during sample collection can be minimized from the onset by employing techniques that are plastic-less or with minimal plastic-to-sample contact. Here we describe plastic-less equipment and techniques for field sampling of water, sediment, and organisms. Some of these are traditional designs that pre-date the plastic era and can be revived or repurposed for microplastic sampling. Others are self-developed and fabricated using materials such as metal, wood, silk, and cork. For relatively small costs in time and funds, it is possible to greatly reduce, or eliminate, plastics from the field sampling process.

Temporal Variability of Microplastic Concentrations in Inland Waters: An Automated, Semicontinuous Sampling of Microplastics ≥11 μm in a Stream in Southern Germany

Temporal Variability of Microplastic Concentrations in Inland Waters: An Automated, Semicontinuous Sampling of Microplastics ≥11 μm in a Stream in Southern Germany

Quantification and characterization of airborne microplastics in the coastal area of Terengganu, Malaysia.

Microplastics (MPs) pose a threat to ecosystems due to their capacity to bind with toxic chemicals. While the occurrence of MPs in aquatic environmental matrices like water, sediments, and biota is well studied, their presence in the atmosphere remains less understood. This study aimed to determine the presence of airborne MPs and their characteristics through ground-based sampling in the coastal city of Kuala Nerus, Terengganu, Malaysia. Airborne MP samples were collected using passive sampling technique in December 2019. MPs were manually counted and identified using a stereomicroscope based on their colour and shape. The average deposition rate of airborne MPs during the sampling period was 5476 ± 3796 particles/m2/day, ranging from 576 to 15,562 particles/m2/day. Various colours such as transparent (38%), blue (25%), black (20%), red (13%), and others (4%) were observed. The predominant shape of airborne MPs was fibres (> 99%). The morphology structure of MPs observed using a scanning electron microscope (SEM) showed a cracked surface on MPs, suggesting weathering and irregular fragmentation. Further elemental analysis using energy dispersive X-ray spectroscopy (EDS) showed the presence of heavy metals such as aluminium (Al) and cadmium (Cd) on the surface of MPs, attributed to the adsorption capacities of MPs. Polymer types of airborne MPs were analysed using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), which revealed particles composed of polyester (PES), polyethylene (PE), and polypropylene (PP). The preliminary findings could provide additional information for further investigations of MPs, especially in the atmosphere, to better understand their sources and potential human exposure.

A critical comparison of the main characterization techniques for microplastics identification in an accelerated aging laboratory experiment

Many studies have reported the occurrence of microplastics in different environmental compartments, through the description of their morphological characteristics and chemical identification, obtained mainly by spectroscopic techniques. However, the scientific community still lacks the implementation of standardized analytical methods that aim to assess not only the identification of the particle, but also its stage of degradation. It is understood that this information would be extremely useful in helping elucidate the main sources of pollution and contributing to strategies and mitigating measures for the management of solid waste and microplastics in the environment. In this respect, the aim of this study was to evaluate the efficiency of Fourier-transform infrared spectroscopy, Raman spectroscopy, carbon elemental analysis coupled with mass spectrometry, and scanning electron microscopy with energy dispersive X-ray spectrometry for the characterization of virgin and aged polyethylene and polypropylene microplastics samples. The degraded samples were subjected to accelerated aging in a QUV chamber in accordance with American standard for measuring accelerated weather testing (ASTM G-154). This work discusses the efficiency and limitations of each technique for the detailed chemical characterization of microplastic samples collected from the environment.

Compositional Profiles and Spatial Distribution of Microplastics Across Three Selected Rivers in Rivers State, Nigeria

Microplastics (MP) are ubiquitous and persistent contaminants in waterbodies and a pervasive and preventable threat to the health of marine ecosystems. These particles are defined as &lt;5 mm in size and can be introduced into the environment via primary sources such as the use and disposal of microbeads in cosmetic, cleaning products and sandblasting, as well as secondary sources which include the fragmentation of litter by mechanical or UV light-induced degradation. This study was conducted to investigate the concentrations of microplastic contaminants in Imo River, Ntawogba River and New Calabar River as well as the physicochemical and microbial characteristics of the water bodies. Composite sampling technique was used in this study. The physicochemical analysis of the water samples was carried out both in-situ and ex-situ while the microbiological analysis was performed ex-situ to determine the load using APHA 9215B/9610B and ASTM D 5465-93 (Pour plate) test methods. The total heterotrophic bacteria were more predominant than the other microbial groups in samples obtained from the three rivers. The relatively higher hydrocarbon-utilizing bacteria counts obtained in samples collected from Ntwawogba River is suggestive of benign hydrocarbon contamination of the river. Two techniques (Fourier Transform Infrared Spectroscopy, FTIR and Gas Chromatography-Mass Spectrometry, GC-MS) were used to identify the microplastics and their concentrations. The reference spectra for the FTIR results were in the spectral range stretching from 4000–650cm-1 where the prominent absorption peak at 2920 cm-1 corresponded to aliphatic C-H (Hydrocarbon) stretching, indicating the presence of CH2 (Alkene) and CH3 (Alkane) groups in the microplastic samples, at 1725 cm-1 associated with carbonyl (C=O). The band at 1600 cm-1 is characteristic of aromatic C=C stretching, at 1200-1000 cm-1 range suggesting C-O stretching vibrations. The region between 800 and 700 cm-1 corresponded to out-of-plane bending vibrations commonly seen in aromatic groups while the GC-MS polymer identification library produced results of both qualitative and quantitative assessment of the microplastics. The eight (8) priority MP polymers found in the water samples were polyethylene (PE), polyethylene terephthalate, dioctyl terephthalate, polybrominated diphenyl ether, tetrabromobisphenol A, polypropylene, acrylic fibre, and polystyrene. SEM images of the MPs were acquired at various magnifications to capture their surface features, shapes, and sizes. PE was found to be the most ubiquitous MP (45.74%, 45.84% and 47.76%) across Imo, Ntawogba and New Calabar River, respectively.&#x0D; Results obtained indicate the pervasiveness of MPs in the studied rivers and signify threat to aquatic organisms and man via their biomagnification through the food chain.

Mangrove plants are promising bioindicator of coastal atmospheric microplastics pollution

Plastics are commonly used by society and their break down into millimeter-sized bits known as microplastics (MPs). Due to the possibility of exposure, reports of them in atmospheric deposition, indoor, and outdoor air have sparked worry for public health. In tropical and subtropical regions all throughout the world, mangroves constitute a distinctive and significant type of coastal wetlands. Mangrove plants are considered to have the effect of accumulating sediment MPs, but the sedimentation of atmospheric MPs has not been reported. In this study, we illustrated the characteristics, abundance and spatial distribution of MPs in different species of mangrove leaves along the Seagull Island in Guangzhou. MPs samples from leaves in five species showed various shapes, colors, compositions, sizes and abundance. Acanthus ilicifolius had an average fallout rate of 1223 items/m2/day which has the highest abundance of MPs in all samples. Four shapes of MPs were found in all leaves surfaces including fiber, fragment, pellet, and film, with fiber is the most. The dominant types of MPs in all leaves were cellulose and rayon. Most of the total MPs size were smaller than 2 mm. Clearly, the microstructures of each species leaf surfaces had an impact on its ability to retain MPs. The plants rough blade surfaces and big folds or gullies caused more particles to accumulate and had a higher MPs retention capacity. Overall, our study contributes to a better knowledge of the condition of MPs pollution in atmosphere and the connection between leaves structure and the retention of MPs, which indicates that mangrove plants are promising bioindicator of coastal atmospheric MPs pollution.

A review on microplastics in major European rivers

AbstractThe topic of riverine microplastics is of great interest to the general public, yet the univocal scientific knowledge on this topic is limited. This review investigated the occurrence of microplastics in 6 major European rivers and their tributaries based on the results from 29 studies. We examined the reviewed studies in regard to data quality and reproducibility and assessed the abundance of microplastics in different sections of the water column. Furthermore, we investigated the chemical composition and potential origin of the reported riverine microplastics. We found that polystyrene, polypropylene, and polyethylene were the most abundant polymer types. The majority of primary microplastics arose from the industry sector as well as from personal care and cleaning products, whereas secondary microplastics constituted fibers from synthetic textiles and fragments of diverse origins. We highlighted the diversity of experimental and analytical approaches that could lead to high uncertainties in the measurements of microplastics abundance. Furthermore, the presence of microplastics in rivers was found to vary spatially likely due to point and nonpoint pollution sources of anthropogenic activities. Heterogenous environmental processes impacted the fate of microplastics characterized by various forms, sizes, and densities, in different ways. This impeded the identification of representative quantitative measurements of microplastics across different time frames. We advocate for the development of standardized protocols by the research community to ensure higher reproducibility of sampling, processing, and analysis of microplastics in aquatic environments. We recommend long‐term and site‐specific monitoring on microplastics with high data comparability to better inform policy making.This article is categorized under: Science of Water &gt; Water Quality Water and Life &gt; Conservation, Management, and Awareness