Microplastic Fibers Research Articles

Leaching potentials of microplastic fibers and UV stabilizers from coastal-littered face masks

Synthetic fibrous textiles are ubiquitous plastic commodities in everyday existence. Nevertheless, there exists a dearth of understanding regarding their environmental occurrence and the releasing capacities of associated additives. In this study, ten additives were determined in twenty-eight kinds of daily used plastic products including face masks, synthetic clothing, and food containers. Our results revealed that a typical kind of fibrous plastic, face masks, contained a greater variety of additives with UV stabilizers in particular, when compared to other plastic commodities. The above phenomena triggered our field investigation for the occurrence and release potentials of face mask fibers and the co-existing UV stabilizers into the environment. We further collected 114 disposed masks from coastal areas and analyzed their UV stabilizer concentrations. Results showed that the abundance of littered face masks ranged from 40–1846 items/km2 along the Yangtze Estuary, China; and UV stabilizers were of 0.3 ± 0.7 ng/g and 0.7 ± 1.7 ng/g in main bodies and ear ropes, respectively. The UV stabilizer concentrations in the field collected masks were only ∼7 % of their new counterparts, implying their potential leaching after disposal. By simulating the weathering scenario, we predict that a substantial amount of microplastics, with 1.1 × 1010 polypropylene fibers and 3.7 × 1010 polyester fibers, are probably be released daily into the coastal environment after face masks disposal; whereas the accompanied leaching amount of UV stabilizers was relatively modest under the current scenario.

Negligible adsorption and toxicity of microplastic fibers in disinfected secondary effluents

Wastewater treatment plants play a crucial role in controlling the transport of pollutants to the environment and often discharge persistent contaminants such as synthetic microplastic fibers (MFs) to the ecosystem. In this study, we examined the fate and toxicity of polyethylene terephthalate (PET) MFs fabricated from commercial cloth in post-disinfection secondary effluents by employing conditions that closely mimic disinfection processes applied in wastewater treatment plants. Challenging conventional assumptions, this study illustrated that oxidative treatment by chlorination and ozonation incurred no significant modification to the surface morphology of the MFs. Additionally, experimental results demonstrated that both pristine and oxidized MFs have minimal adsorption potential towards contaminants of emerging concern in both effluents and alkaline water. The limited adsorption was attributed to the inert nature of MFs and low surface area to volume ratio. Slight adsorption was observed for sotalol, sulfamethoxazole, and thiabendazole in alkaline water, where the governing adsorption interactions were suggested to be hydrogen bonding and electrostatic forces. Acute exposure experiments on human cells revealed no immediate toxicity; however, the chronic and long-term consequences of the exposure should be further investigated. Overall, despite the concern associated with MFs pollution, this work demonstrates the overall indifference of MFs in WWTP (i.e., minor effects of disinfection on MFs surface properties and limited adsorption potential toward a mix of trace organic pollutants), which does not change their acute toxicity toward living forms.

Variation in microplastic characteristics among amphibian larvae: a comparative study across different species and the influence of human activity

Microplastic pollution is a significant global environmental issue, and impacts span from individual organisms to the entire ecosystems. This study investigated the properties of microplastics in amphibian larvae, shedding light on their environmental interactions and potential ecological consequences. We examined microplastics extracted from amphibian larvae of 10 taxa, sampled from sites experiencing different levels of human impact. Our findings revealed a predominance of blue microplastics and fibres, each comprising 53% of the total microplastics in amphibian larvae. Microplastic fibres were also notably longer than other morphological types of microplastics. Furthermore, we observed variations in the surface area of microplastics among different amphibian families. An interesting observation from our research is the apparent positive relationship between the size of amphibian larvae and the length of granular and flake-shaped microplastics. Conversely, we observed a negative relationship between the length of these microplastics and human environmental impact. These insights significantly contribute to the understanding of microplastic pollution in freshwater environments, highlighting its complexities beyond marine ecosystems. Our research emphasises the intricate relationships between microplastics and freshwater organisms, underscoring the need for comprehensive strategies to mitigate microplastic pollution.

Lung microbiota participated in fibrous microplastics (MPs) aggravating OVA-induced asthma disease in mice

Environmental pollution is one of the risk factors for asthma. Currently, whether micro-plastics could aggravate asthma, is still unclear. In the air, fibrous MPs are the predominant shape. Since fibrous micro-plastics are reported to be detected in the lower respiratory tract and other body parts, the relationship of fibrous MP and asthma, as well as the potential mechanism is not well investigated. In this study, we produced fibrous MPs, whose lengths and widths were in accordance with the natural environment, and further, investigated the potential adverse effect of which on the asthma in a OVA (ovalbumin)-induced mice model, aiming at exploring the true life hazard of MP to the respiratory system. Following nasal exposure to fibrous MPs, the airway inflammation, mucus hypersecretion and fibrosis were aggravated in asthmatic mice. Fibrous MPs exposure also significantly increased the levels of total IgE, and, cardinal Th2 and Th1 pro-inflammatory cytokines participated in the etiopathogenesis of allergic airway inflammation. In addition, MP fibers exposure induced lung epithelial cells apoptosis, disruption of epithelial barrier integrity and activation of NLRP3 related signaling pathways. Moreover, fibrous MPs significantly altered the bacterial composition at the genus level. Compared to the control group, the relative abundance of Escherichia-Shigella and Uncultured were decreased to 4.47% and 0.15% in OVA group, while Blautia and Prevotella were elevated to 4.96% and 2.94%. For the OVA + MPs group, the relative abundance of Blautia and Uncultured were decreased to 2.27% and 0.006%, while Prevotella was increased to 3.05%. Our study highlights the detrimental effect of fibrous MPs on asthmatic population and facilitates an indication of the latent mechanisms of fibrous MPs induced airway pathology.

Mechanochemical Formation of Poly(melamine-formaldehyde) Microplastic Fibers During Abrasion of Cleaning Sponges.

The abrasion of synthetic textile fibers is a significant factor in the generation of environmental microplastic fibers (MPFs). The extent to which polymer sponges designed specifically for surface cleaning have a tendency to release MPFs during normal use remains unknown. Here, the tribological behaviors of melamine cleaning sponges (also known as "magic erasers") with different strut densities against metal surfaces of different roughness were investigated using a reciprocating abrader. The MPFs formed by sponge wear under various conditions were characterized in terms of their morphology, composition, and quantity. They were mainly composed of poly(melamine-formaldehyde) polymer with linear or branched fiber morphologies (10-405 μm in length), which were formed through deformation and fracture of the struts within open cells of the sponges, facilitated by friction-induced polymer decomposition. The rate and capability of MPF production generally increased with increasing roughness of the metal surface and density of the struts, respectively. The sponge wear could release 6.5 million MPFs/g, which could suggest a global overall emission of 4.9 trillion MPFs due to sponge consumption. Our study reveals a hitherto unrecognized source of the environmental MPF contamination and highlights the need to evaluate exposure risks associated with these new forms of MPFs.

Microplastics in tea from planting to the final tea product: Traceability, characteristics and dietary exposure risk analysis

Tea, sold as tea bags or loose tea, is a popular drink worldwide. We quantified microplastics in loose tea during various stages of production, from planting to processing and brewing. The quantity of microplastics in tea ranged from (70–3472 pcs/kg), with the highest abundance detected during processing, mainly in the rolling stage (2266 ± 1206 pcs/kg tea). Scanning electron microcopy revealed scratches and pits on the surface of microplastics fibers from tea plantation soil and processed tea, and their degradation was characterized by cracks and fractures. Exposure risks, based on an estimated dietary intake of 0.0538–0.0967 and 0.0101–0.0181 pcs /kg body weight /day for children and adults, respectively, are considered very low. This study not only evaluates the extent of research on microplastics pollution in tea, but also assess the risk of people's exposure to microplastics through drinking tea.

Daphnia magna exhibit a preference for microplastic fibers that are black in the presence of olfactory cues

Daphnia magna exhibit a preference for microplastic fibers that are black in the presence of olfactory cues

Microplastics pollution in the Surma River, Bangladesh: A rising hazard to upstream water quality and aquatic life

The ecological health of freshwater rivers is deteriorating globally due to careless human activities, for instance, the emission of plastic garbage into the river. The current research was the first assessment of microplastics (MPs) pollution in water, sediment, and representative organisms (fish, crustacean, and bivalve) from the Surma River. Water, sediment, and organisms were sampled from six river sites (Site 1: Charkhai; Site 2: Golapganj; Site 3: Alampur; Site 4: Kazir Bazar; Site 5: Kanishail and Site 6: Lamakazi), and major water quality parameters were recorded during sampling. Thereafter, MPs in water, sediment, and organism samples were extracted, and then microscopically examined to categorize selected MPs types. The abundance of MPs, as well as size, and color distribution, were estimated. Polymer types were analyzed by ATR-FTIR, the color loss of MPs was recorded, the Pollution Load Index (PLI) was calculated, and the relationship between MPs and water quality parameters was analyzed. Sites 4 and 5 had comparatively poorer water quality than other sites. Microplastic fibers, fragments, and microbeads were consistently observed in water, sediment, and organisms. A substantial range of MPs in water, sediment, and organisms (37.33–686.67 items/L, 0.89–15.12 items/g, and 0.66–48.93 items/g, respectively) was recorded. There was a diverse color range, and MPs of <200 μm were prevalent in sampling areas. Six polymer types were identified by ATR-FTIR, namely Polyethylene (PE), Polyamide (PA), Polypropylene (PP), Cellulose acetate (CA), Polyethylene terephthalate (PET), and Polystyrene (PS), where PE (41%) was recognized as highly abundant. The highest PLI was documented in Site 4 followed by Site 5 both in water and sediment. Likewise, Sites 4 and 5 were substantially different from other study areas according to PCA. Overall, the pervasiveness of MPs was evident in the Surma River, which requires further attention and prompt actions.

Lensless shadow microscopy-based shortcut analysis strategy for fast quantification of microplastic fibers released to water

Fast quantification is the primary challenge in monitoring microplastic fiber (MPF) pollution in water. The process of quantifying the number of MPFs in water typically involves filtration, imaging on a filter membrane, and manual counting. However, this routine workflow has limitations in terms of speed and accuracy. Here, we present an alternative analysis strategy based on our high-resolution lensless shadow microscope (LSM) for rapid imaging of MPFs on a chip and modified deep learning algorithms for automatic counting. Our LSM system was equipped with wide field-of-view submicron-pixel imaging sensors (>1 cm2; ∼500 nm/pixel) and could simultaneously capture the projection image of >3-μm microplastic spheres within 90 s. The algorithms enabled accurate classification and detection of the number and length of >10-μm linear and branched MPFs derived from melamine cleaning sponges in each image (∼0.4 gigapixels) within 60 s. Importantly, neither MPF morphology (dispersed or aggregated) nor environmental matrix had a notable impact on the automatic recognition of the MPFs by the algorithms. This new strategy had a detection limit of 10 particles/mL and significantly reduced the time of MPF imaging and counting from several hours with membrane-based methods to just a few minutes per sample. The strategy could be employed to monitor water pollution caused by microplastics if an efficient sample separation and a comprehensive sample image database were available.

Chronic Toxicity of Microplastics on Fish (Labeo rohita) and Their Impact on the Freshwater Ecosystem: A Case Study of Gangasagar Pond, Darbhanga, India

The present investigation was conducted to evaluate the chronic toxicity of microplastics on fish, Labeo rohita and isolation, identifications and estimation of microplastics in freshwater pond, Gangasagar Pond, Darbhasnga. traceable clinical, anatomical (morphological) and histopathological alterations. The data were analyzed and found that microplastic fibre (ranging between 12 to 56/m3) were dominated followed by microplastic film (ranging between 10 to 38), fragment (ranging between 8-22). The number of foam, beads (spherical) and coloured were relatively low. The sources of these plastic contaminations are mainly domestic wastes, discarded packaging materials and medical wastes. Trace of microplastics in gill chamber as well as buccal cavity was well marked causing edematous changes. The Histopathological studies suggest that intestine and stomach were the most affected organs in response to microplastics abuse. Microplastics will ultimately affect the aquatic fauna of the pond adversely.

Passive biomonitoring of airborne microplastics using lichens: A comparison between urban, natural and protected environments

Currently, natural and urban ecosystems are affected by different types of atmospheric deposition, which can compromise the balance of the environment. Plastic pollution represents one of the major threats for biota, including lichens. Epiphytic lichens have value as bioindicators of environmental pollution, climate change, and anthropic impacts. In this study, we aim to investigate the lichen bioaccumulation of airborne microplastics along an anthropogenic pollution gradient. We sampled lichens from the Genera Cladonia and Xanthoria to highlight the effectiveness of lichens as tools for passive biomonitoring of microplastics. We chose three sites, a “natural site” in Altipiani di Arcinazzo, a “protected site” in Castelporziano Presidential estate and an “urban site” in the centre of Rome. Overall, we sampled 90 lichens, observed for external plastic entrapment, melt in oxygen peroxide and analysed for plastic entrapment. To validate the method, we calculated recovery rates of microplastics in lichen. Particularly, 253 MPs particles were detected across the 90 lichen samples: 97 % were fibers, and 3 % were fragments. A gradient in the number of microplastic fibers across the sites emerged, with increasing accumulation of microplastics from the natural site (n = 58) to the urban site (n = 116), with a direct relationship between the length and abundance of airborne microplastic fibers. Moreover, we detected the first evidences of airborne mesoplastics entrapped by lichens. On average, the natural site experienced the shortest fibre length and the centre of Rome the longest. No differences in microplastics accumulation emerged from the two genera. Our results indicated that lichens can effectively be used for passive biomonitoring of microplastic deposition. In this scenario, the role of lichens in entrapping microplastics and protecting pristine areas must be investigated. Furthermore, considering the impact that airborne microplastics can have on human health and the effectiveness of lichens as airborne microplastic bioindicators, their use is encouraged.

Potential health risks of microplastic fibres release from disposable surgical masks: Impact of repeated wearing and handling

Disposable surgical masks undeniably provide important personal protection in daily life, but the potential health risks by the release of microplastic fibres from masks should command greater attention. In this study, we conducted a microplastic fibre release simulation experiment by carrying masks in a pocket and reusing them, to reveal the number and morphological changes of microfibres released. Fourier transform infrared spectrometry, scanning electron microscopy, and optical microscopy were employed to analyse the physical and chemical characteristics of the mask fibres. The results indicated that the reuse of disposable masks led to a significant release of microplastic fibres, potentially leading to their migration into the respiratory system. Furthermore, the release of microplastic fibres increased with prolonged external friction, particularly when masks were stored in pockets. The large-scale release of microplastic fibres due to mask reuse raises concerns about potential health risks to the human respiratory system. The reuse of disposable masks should be also strictly avoided in daily life in the future. Furthermore, the current study also established a robust foundation for future research endeavours on health risks associated with microplastic fibres entering the respiratory system through improper mask usage.

Monitoring of Microplastics in Water and Sediment Samples of Lakes and Rivers of the Akmola Region (Kazakhstan)

This paper provides a detailed description of the findings and methodology related to the monitoring of microplastics in three lakes and one river of the Akmola Region in Kazakhstan. The concentration of microplastic particles and the analysis of water and sediment quality of the Yesil River and Kopa, Zerendinskoye, and Borovoe lakes have been analyzed. A total of 64 water samples were collected across the spring, summer, and autumn seasons, with subsequent analysis revealing a seasonal increase in microplastic concentrations. The average microplastic content ranged from 1.2 × 10−1 particles/dm3 in spring to 4.5 × 10−1 particles/dm3 in autumn. Lakes exhibited higher concentrations compared to the Yesil River. Correlation analysis highlighted a connection between microplastic content and turbidity, particularly notable during the spring season. Analysis of sediments revealed a decrease in microplastic concentrations from the coastal zone toward open waters sediments. Microplastic fibers were predominant in sediments (69.6%), followed by fragments (19.1%), films (7.4%), and granules (3.9%). Larger particles (&gt;500 µm) were found in beach sediments, constituting an average of 40.5% of the total plastics found. This study contributes valuable insights into the spatial and temporal distribution of microplastics, emphasizing the need for ongoing monitoring and management strategies to address this environmental concern.

Influence of trophic overlaps and trophic niche amplitude on microplastic intake of fish species in shallow areas of a neotropical coastal lagoon

Plastic pollution is a global challenge that affects all marine ecosystems, and reflects all types of uses and activities of human society in these environments. In marine ecosystems, microplastics and mesoplastics interact with invertebrates and become available to higher predators, such as fish, which can ingest these contaminants. This study aimed to analyze how ecological food interactions (diet overlap and trophic niche amplitude) among fish species contribute to the ingestion of plastic particles. The gastrointestinal contents of six fish species (Atherinella brasiliensis, Eucinostomus melanopterus, Eucinostomus argenteus, Genidens genidens, Coptodon rendalli, and Geophagus brasiliensis) were analyzed to identify prey items and plastic ingestion. Based on the ontogenetic classification, A. brasiliensis, E. melanopterus, and G. genidens were divided into juveniles and adults, and the six fish species analyzed were divided into nine predator groups. Most of the plastics ingested by the fish species were blue microplastic (MP) fibers (< 0.05 mm) classified as polyester terephthalate, polyethylene, and polybutadiene. Considering all the analyzed predators, the average number and weight of plastics ingested per individual were 2.01 and 0.0005 g, respectively. We observed that predators with a high trophic overlap could present a relationship with the intake of MP fibers owing to predation on the same resources. In addition, we observed the general pattern that when a species expands its trophic diversity and niche, it can become more susceptible to plastic ingestion. For example, the species with the highest Levin niche amplitude, E. argenteus juveniles, had the highest mean number (2.9) of ingested MP fibers. Understanding the feeding ecology and interactions among species, considering how each predator uses habitats and food resources, can provide a better understanding of how plastic particle contamination occurs and which habitats are contaminated with these polluting substances.

The effect of bed load sediments on self-purification of river – Experimental approach

Assessing the profitability of river restoration requires knowledge of the importance of individual ecosystem elements for the value of specific ecosystem services. The aim of this study was to experimentally estimate the effect of the presence of bed load on the processes of water self-purification from suspended solids, organic matter and microplastic fibres. The experiment was carried out in channels with and without bed load, simulating conditions in a lowland river. The system was supplemented with artificial sewage containing FPOM and polypropylene fibres. Changes in the amount of suspended solids in the water, as well as organic matter and microplastics in the water and sediment, were recorded over the course of a week. The presence of a bed load increased the rate of suspension removal from the river water many times over. The decomposition rate of organic matter in the sediment was much higher than in the water, reaching 1 g of organic carbon per week. Bed load favoured the immobilisation of large microplastic fibres, facilitating their incorporation into bottom biofilms. The fibres formed a 'skeleton' that led to the formation of larger bed load biofilms. The study suggests that, even without restoring the connection between river water and groundwater, the supply of bed load to the river significantly increases the efficiency of natural processes in the river ecosystem, including self-purification.

A Review of the Sources, Environmental Behaviours and Human Health of Atmospheric Microplastics

The article places emphasis on the latest advancements in this field, particularly focusing on indoor and outdoor microplastic (MP) pollution, including their emission, behaviour and potential health hazards. Gaining an in-depth understanding of these factors is crucial for devising effective strategies to mitigate the impact of microplastics (MPs) on human health and the environment. Indoor MP abundance is generally higher than outdoor levels, with textiles serving as a primary source of indoor airborne MPs. Traffic-derived MP particles, MP fibres in residential areas, agricultural plastic mulch, marine MPs and landfill sites appear to be contributors to outdoor atmospheric MP pollution. Factors such as wind direction, wind speed, precipitation and snowfall, along with the physical characteristics and secondary suspension of MPs, collectively influence their behaviour, distribution and fate. Inhalation and ingestion constitute the main exposure pathways for airborne MPs, potentially leading to health issues like respiratory inflammation. Therefore, gaining a deeper insight into the behaviour and impact mechanisms of atmospheric MPs aids in formulating effective risk management strategies to safeguard human health and maintain environmental sustainability.

Ceramic membranes as a potential high-performance alternative to microplastic filters for household washing machines

The development of effective, commercially available microplastic filters has become more important due to the steady increase in microplastic emissions from laundry washing cycles and the stringent regulations enforced in many countries. In this present study, commercially available microplastic filters and alternative membranes were thoroughly investigated with real laundry wastewater based on their microplastic filterability and organic contaminant retention. The microplastic filterability of each filter and membrane was assessed using a fluid imaging microscopy device, known as FlowCam, which is recognized for its rapid and realistic quantification. As a result, commercially available microplastic filters revealed a poor microplastic filtering performance, with a removal efficiency of only 19.7–24.8%, with no retention of organic contaminants. A subsequent systematic comparison of polymeric and ceramic membranes with smaller pores was thus conducted to explore their potential as effective alternative microplastic filters for household washing machines. While both membranes effectively retained microplastic fibers and organic contaminants, the ceramic membrane exhibited lower susceptibly to fouling due to its relatively hydrophobic surface. Additionally, it also removed a significant proportion of hydrophobic compounds from real laundry wastewater, thereby improving its organic retention. Further research into the convenient cleaning, long-term sustainability, and practical design of mountable ceramic membranes is necessary before their widespread adoption as external washing machine filters.

Liquidlike, Low-Friction Polymer Brushes for Microfibre Release Prevention from Textiles.

During synthetic textile washing, rubbing between fibres or against the washing machine, exacerbated by the elevated temperature, initiates the release of millions of microplastic fibres into the environment. A general tribological strategy is reported that practically eliminates the release of microplastic fibres from laundered apparel. The two-layer fabric finishes combine low-friction, liquidlike polymer brushes with "molecular primers", that is, molecules that durably bond the low-friction layers to the surface of the polyester or nylon fabrics. It is shown that when the coefficient of friction is below a threshold of 0.25, microplastic fibre release is substantially reduced, by up to 96%. The fabric finishes can be water-wicking or water-repellent, and their comfort properties are retained after coating, indicating a tunable and practical strategy toward a sustainable textile industry and plastic-free oceans and marine foodstuffs.

The Influence of Textile Type, Textile Weight, and Detergent Dosage on Microfiber Emissions from Top-Loading Washing Machines.

The use of washing machines to wash textiles gradually breaks down synthetic fibers like polyethylene terephthalate (PET) or polyester (PES) in diverse clothing materials, a process that is growing in notoriety because it generates microplastics (MPs). In this study, we investigated the emission of microfibers, including both microplastic fibers (MPFs) and natural fibers (MFs), from top-loading washing machines. Our investigation focused on four popular textiles with prevalent weave structures (plain, satin, and twill): (i) PES, (ii) tetron cotton (TC), (iii) chief value cotton (CVC), and (iv) cotton (CO) fabrics. This study also examined the effects of textile weight and detergent dosage on MF emissions. After washing, MFs were collected through filtration, and their concentrations were determined using micro-Fourier Transform Interferometry (μFTIR). The results showed varying concentrations of MFs in the washing effluent depending on the type of textile. Specifically, CVC exhibited the highest emission at 4022 particles/L, followed by TC, PES, and CO at 2844 particles/L, 2382 particles/L, and 2279 particles/L, respectively. The hydrophobic nature of PES makes this type of textile prone to rapid degradation in detergent-rich environments, leading to high MF emissions. Additionally, the mechanical properties of textiles, such as tensile and bending strengths, may play a crucial role in the generation of MFs in washing machines. Textiles made of CO with twill weaves demonstrated superior strength and correlated with lower emissions of MFs. In comparison, textiles made of CVC and satin weave exhibited lower mechanical properties, which could explain their high emissions of MFs. Finally, the MF emissions of textiles composed of PES and TC, which are plain weaved, could be attributed to their intermediate mechanical properties compared with those of CVC and CO.

Occurrence of microplastics in fish gastrointestinal tracts belongs to different feeding habits from the Bangladesh coast of the Bay of Bengal.

The Bay of Bengal (BoB) is home to a range of commercially important species with different food habits and feeding features. Microplastic (MP) contamination in the fish of BoB, like in many other marine environments, is a significant environmental concern. The study aimed to investigate the presence of microplastics (MPs) in the gastrointestinal tracts (GITs) of selected commercial marine fishes from the Bangladesh coast of the BoB. Six fish species (Escualosa thoracata, Tenualosa ilisha, Johnius belangerii, Trichiurus lepturus, Planiliza parsia, and Mystus gulio) were investigated (n = 120) following hydrogen peroxide digestion, and floatation (saline solution) protocols. After analyses, a total number of 696 MPs (dimension 0.3 to 5 mm) were identified. Moreover, the highest occurrence of MPs in fish GITs was found in planktivorous fish (average of 7.7 items/individual), followed by omnivorous (average of 5.2 items/individual), and carnivorous fish (average of 4.6 items/individual) (p < 0.001). However, planktivorous E. thoracata showed the highest number of MPs per g of GIT (average of 30.99 items/g GIT), whereas T. ilisha showed the lowest count (average of 0.77 items/g GIT). Different types of MPs (fibers (19 to 76%), fragments (6 to 61%), films (8 to 35%), microbeads (0 to 5%), and foams (0 to 2%)) were also observed. In terms of the color of MPs, the transparent, black, green, and blue types were the most common. Polymers were found as polyethylene (35 to 43%), polyethylene terephthalate (28 to 35%), polyamide (20 to 31%), and polystyrene (0 to 7%). The study provides a significant incidence of MPs in fish from the Bangladesh part of the BoB, which is very concerning. Therefore, long-term research is indispensable to ascertain the variables affecting the presence of MPs in fish, their origins, and their potential effects on the BoB fisheries. Stringent policies on plastic use and disposal should be strongly urged in this coastal region.