Processing Of Microalgae Research Articles

Effect of harvesting time in the methane production on the anaerobic digestion of microalgae

ABSTRACT Microalgae are being proposed as excellent substrates for different biorefinery processes. Anaerobic digestion process of microalgae is one of these interesting processes but has some limitations in deleting cell walls. For this reason, many studies proposed different types of pre-treatments, entailing energy, operation, and investment costs. This work aims to optimize the anaerobic digestion of the microalgae Chlorella sorokiniana and Chlorella sorokiniana (strain S12/S13/S16) without any pre-treatment by selecting the optimal harvesting time. The greatest influence is seen at 5:00 PM in methane production for both microalgae. For Chlorella sorokiniana, it is the most optimal moment for anaerobic digestion, whereas Chlorella sorokiniana (strain S12/S13/S16) is the least optimal. In the other harvesting times, both microalgae present a similar methane production, i.e. 173 ± 12 mL CH4/g of total volatile solids. The highest methane production rate values were obtained during peak sunlight, 1:00 PM and 8:00 AM, respectively, and lower overnight.

ACC1 and ACC2 Genes Expression Microalgae Skletonema costatum On Stress Aeration And fotoperiode In Simultans

Abiotic stresses such as photoperiod, aeration, CO2 concentration, pH, temperature, and salinity can affect and salinity the physiological processes of microalgae. One of the physiological processes that occur is a change in the lipid biosynthetic pathway towards the formation and accumulation of neutral lipids. Neutral lipid accumulation in the form of TAGs. TAGs as one of the defense mechanisms. The regulation of fatty acid biosynthesis is initiated by the ACC1 and ACC2 genes. This study aims to determine the expression of ACC1 and ACC2 genes under conditions of aeration stress and photoperiod simultaneously in microalgae Skeletonema costatum. The method used was the analysis of gene expression in the sample of S. costatum RNA extract using qRT-PCR. Based on the results of the study, it was found that the ACC1 gene was expressed and upregulated in the A2F2 treatment (24-hour aeration and 24:0 photoperiod) with a CT value of 36.85 while the ACC2 gene was expressed and upregulated in the A1F1 treatment (12-hour aeration and 12:12 photoperiod). with the CT value of 36,874.

Kinetic analysis of microalgae cultivation utilizing 3D-printed real-time monitoring system reveals potential of biological CO2 conversion

The microalgae-based bioconversion process is a promising carbon utilization technology because it can upgrade CO2 into valuable substances, but a multiplex monitoring system required for process control to maximize biomass productivity has not been well established. Herein, a 3D printed real-time optical density monitoring device (RTOMD) combined platform was presented. This platform enables precise kinetics analysis by maintaining high accuracy (over 95 %) under raucous outdoor conditions. Through RTOMD-based high-frequency measurements, it was observed that maximum biomass productivity of 4.497 g L−1 d−1 was reached, which greatly exceeds the requirements for a feasible microalgae process. We discovered that the CO2 fixation efficiency could be achieved to 70.75 %, indicating the potential of a bioconversion process to realize a carbon–neutral society. Consequently, the RTOMD system can contribute to promoting microalgae cultivation as an attractive carbon mitigation technology based on an improved understanding of the photosynthetic CO2 fixation kinetics.

Recent advances in the bio-application of microalgae-derived biochemical metabolites and development trends of photobioreactor-based culture systems.

Microalgae are microscopic algae in sizes ranging from a few micrometers to several hundred micrometers. On average, half of the oxygen in the atmosphere is produced by the photosynthetic process of microalgae, so the role of these microorganisms in the life cycle of the planet is very significant. Pharmaceutical products derived from microalgae and commercial developments of a variety of supplements extracted from them originate from a variety of their specific secondary metabolites. Many of these microalgae are a reservoir of unique biological compounds including carotenoids, antioxidants, fatty acids, polysaccharides, enzymes, polymers, peptides, pigments, toxins and sterols with antimicrobial, antiviral, antifungal, antiparasitic, anticoagulant, and anticancer properties. The present work begins with an introduction of the importance of microalgae in renewable fuels and biodiesel production, the development of healthy food industry, and the creation of optimal conditions for efficient biomass yield. This paper provides the latest research related to microalgae-derived substances in the field of improving drug delivery, immunomodulatory, and anticancer attributes. Also, the latest advances in algal biocompounds to combat the COVID-19 pandemic are presented. In the subject of cultivation and growth of microalgae, the characteristics of different types of photobioreactors, especially their latest forms, are fully discussed along with their advantages and obstacles. Finally, the potential of microalgae biomass in biotechnological applications, biofuel production, as well as various biomass harvesting methods are described.

Influence of exogenous phytohormone supplementation on the pigment and fatty acid content of three marine diatoms.

Diatoms are ubiquitous photosynthetic microorganisms with great potential for biotechnological applications. However, their commercialisation is hampered by production costs, requiring hence optimisation of cultivation methods. Phytohormones are plant growth regulators which may be used to influence physiological processes in microalgae, including diatoms. In this study, the model species Phaeodactylum tricornutum (Phaeodactylaceae) and two Irish isolates of Stauroneis sp. (Stauroneidaceae) and Nitzschia sp. (Bacillariaceae) were grown with varying amounts of the phytohormones indoleacetic acid (IAA), gibberellic acid (GA3), methyl jasmonate (MJ), abscisic acid (ABA) or salicylic acid (SA), and their influence on pigment and fatty acid profiles was monitored. The application of GA3 (200mg/l) stimulated the growth of P. tricornutum which accumulated 52% more dry biomass compared to the control and concomitantly returned the highest eicosapentaenoic acid (EPA) yield (0.6mg/l). The highest fucoxanthin yield (0.18mg/l) was obtained for P. tricornutum cultivated with GA3 (2mg/l) supplementation. In Stauroneis sp., SA (1mg/l) had the most positive effect on EPA, the content of which was enhanced up to 45.7μg/mg (4.6% of total dry weight). The SA (1mg/l) treatment also boosted carotenogenesis in Nitzschia sp., leading to 1.7- and 14-fold increases in fucoxanthin and β-carotene compared to the control, respectively. Of note, MJ (0.5mg/l) increased the EPA content of all diatom species compared to their controls. These results indicate that phytohormone-based treatments can be used to alter the pigment and lipid content of microalgae, which tend to respond in dose- and species-specific manners to individual compounds.Key points• Response to phytohormones was investigated in diatoms from distinct families.• MJ (0.5mg/l) caused an increase in EPA cellular content in all three diatoms.• Phytohormones mostly caused dose-dependent and species-specific responses.

Extracellular polymeric substance profiling and biophysical analysis reveal influence factors of spontaneous flocculation in rich lipid alga Heveochlorella sp. Yu

Microalgae harvest and lipid accumulation were important factors influencing commercialized development of microalgae biodiesel. Spontaneous flocculation was an ideal method in microalgae harvest, but few rich lipid microalgae could be harvested by spontaneous flocculation. Rich lipid alga Heveochlorella sp. Yu has a characteristic of spontaneous flocculation to be harvested. Heveochlorella sp. Yu has high lipid productivity (105.24 mg L−1 d−1) and fine spontaneous flocculation efficiency (82.93 %, 2 h) on early stationary phase (day 9). The polysaccharides consisting of glucose, mannose, galactose, rhamnose and fructose (8.67:4.90:3.27:2.16:1) in loose-bound extracellular polymeric substance (LB-EPS) might make great contribution in microalgae flocculation. Meanwhile, the zeta potential close to zero was also beneficial to microalgae flocculation. Besides, the adhesion free energy related with cells adhesion was detected by thermomechanical analysis. Afterward, Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory was utilized to quantitatively evaluate short-range interactions involved in the spontaneous aggregation among cells. Collectively, biophysical analyses indicated that content and composition of EPS, Zeta potential, thermodynamic parameter and total interaction based on XDLVO theory were closely connected with spontaneous flocculation in microalga Yu. Our study provided a harvest-simplified process of rich microalgae, which proposes a new idea for commercial development of microalgae biodiesel.

Application of Analytic Hierarchy Process in the Selection of Botryococcus braunii Cultivation Technology for Bio-crude Oil Production

Bio-crude oil is a way to utilize bioenergy that can reduce the Indonesian government's dependence on fossil energy. Bio-crude oil can be obtained by carrying out a thermochemical process of biomass. Microalgae is a potential source of biomass and Botryococcus braunii is one of the promising types of microalgae for this matter. One of the units required in the conversion process of microalgae into bio-crude oil is the cultivation unit. The objective of this study is to determine the most effective and optimal cultivation technology to be applied to the bio-crude oil refinery plant. Location of the cultivation system is in Cilacap, Central Java, Indonesia. A study was conducted for this purpose using the Analytic Hierarchy Process (AHP) method. The cultivation systems proposed to be the alternatives were open raceway pond, flat panel photo-bioreactor, hybrid, and membrane photo-bioreactor. The AHP results showed that the open raceway pond was selected to be applied to the bio-crude oil refinery process. The biomass production potential of Botryococcus braunii from the cultivation unit in this study was 19.8795 ton/year/ha which could be processed into 11.5301 ton of bio-crude oil with a high heating value (HHV) of 553,448.8 MJ.

Global market and economic analysis of microalgae technology: Status and perspectives

Microalgae have been a promising alternative source of high-value compounds to replace the non-sustainable fossil fuels resource. The recent research development of algae-based bioproducts has remarkable impact various industries section for its renewability, efficiency, and environmentally friendly crops over those synthetic-made product. However, by utilizing microalgae biomass toward their full potential is still limited due to lack of research funding, social acceptability and challenges in policy implementation. This present review highlights the various microalgae biotechnology with consideration of economical aspect for the global potential of algae market, comparison between the microalgae market in Malaysia and international countries. In addition, the cultivation technologies and feasibility of microalgae biomass production globally, followed by insightful challenges and future development of microalgae industry are mentioned. The current study will contribute to the understanding of upstream and downstream of microalgae processing along with technical economical understandings for the successful commercialisation of microalgae products.

Combined Process of Biogenic Manganese Oxide and Manganese-Oxidizing Microalgae for Improved Diclofenac Removal Performance: Two Different Kinds of Synergistic Effects.

Biogenic manganese oxides (Bio-MnOx) have attracted considerable attention for removing pharmaceutical contaminants (PhCs) due to their high oxidation capacity and environmental friendliness. Mn-oxidizing microalgae (MnOMs) generate Bio-MnOx with low energy and organic nutrients input and degrade PhCs. The combined process of MnOMs and Bio-MnOx exhibits good prospects for PhCs removal. However, the synergistic effects of MnOMs and Bio-MnOx in PhCs removal are still unclear. The performance of MnOMs/Bio-MnOx towards diclofenac (DCF) removal was evaluated, and the mechanism was revealed. Our results showed that the Bio-MnOx produced by MnOMs were amorphous nanoparticles, and these MnOMs have a good Mn2+ tolerance and oxidation efficiency (80–90%) when the Mn2+ concentration is below 1.00 mmol/L. MnOMs/Bio-MnOx significantly promotes DCF (1 mg/L) removal rate between 0.167 ± 0.008 mg/L·d (by MnOMs alone) and 0.125 ± 0.024 mg/L·d (by Bio-MnOx alone) to 0.250 ± 0.016 mg/L·d. The superior performance of MnOMs/Bio-MnOx could be attributed to the continuous Bio-MnOx regeneration and the sharing of DCF degradation intermediates between Bio-MnOx and MnOMs. Additionally, the pathways of DCF degradation by Bio-MnOx and MnOMs were proposed. This work could shed light on the synergistic effects of MnOMs and Bio-MnOx in PhCs removal and guide the development of MnOMs/Bio-MnOx processes for removing DCF or other PhCs from wastewater.

Valorization of fish bone waste as novel bioflocculant for rapid microalgae harvesting: Experimental evaluation and modelling using back propagation artificial neural network

Harvesting of microalgae biomass is identified as one of the bottlenecks in microalgae biofuel industry due to expensive and energy-intensive dewatering technologies. Alternatively, flocculation process using bioflocculants have given much attention in recent years as green substitutes over chemical flocculants. In this study, bioflocculant was extracted from waste fish bone using mild acid to harvest the freshwater microalgae, Chlorella vulgaris. The optimum flocculation occurred at pH of 9.8 and 50 °C using fish bone bioflocculant which led to flocculation efficiency of 97.65%. To predict complex processes such as microalgae flocculation, artificial neural network (ANN) was employed. Bayesian regularization model with a topology of 2-10-1 showed high correlation coefficients, R2 of more than 0.98, which indicated that the model was significant and robust in identification of the optimum conditions. Characterizations of fish bone bioflocculant and biofloc confirmed the involvement of potassium and other cations as well as carbohydrate and protein substances to flocculate C. vulgaris cells, employing sweeping and charge neutralization as key mechanisms. This finding proposed a valuable reference for practical and rapid harvesting of microalgae using low-cost bioflocculant and the ANN algorithm can be applied in microalgae processing industries for making crucial assessments regarding the process operating conditions.

Application of Liquid Waste from Biogas Production for Microalgae Chlorella sp. Cultivation.

Microalgae biomass is a viable feedstock for a wide range of industries. Recently, there has also been interest in the ability of microalgae biomass applications for biofuel production. In the meantime, the cultivation of microalgae biomass requires high energy costs, and the application of microalgae for technical purposes is still problematic. A significant part of the cost of biomass arises from the nutrients used for cultivation. Chemical compounds included in the microalgae cultivation media can be replaced by suitable wastes containing nitrogen, phosphorus, and other elements. This could reduce the microalgae biomass cultivation price and allow cheaper biomass to be used for biofuel production. The aim of this work was to comprehensively investigate and optimize the growth process of microalgae using liquid waste (liquid waste after biogas production from sewage sludge and distillers’ grain) as a source of nitrogen and phosphorus, and technical glycerol as a carbon source. It was found that higher levels of waste in the cultivation media were found to inhibit the accumulation of microalgal biomass, with the optimum level corresponding to a nitrogen concentration of 0.08 g/L. The influence of technical glycerol from biodiesel production on the yield of microalgal biomass was investigated, and it was found that the addition of 6% glycerol allows an increase in the concentration of microalgal biomass in the cultivation media, from 18.1 to 20.6%.

Techno-economic analysis of microalgae production for aquafeed in Norway

The sustainability of the aquaculture sector depends mainly on the search for alternative sources to fishmeal and fish oil, one of which is microalgae. However, there are few feasibility studies of the microalgae process chain. This work aimed to address this gap through a TEA of microalgae (Phaeodactylum tricornutum) production. The TEA combines process modelling, engineering design and economic evaluation. As a result, different projections are obtained, yielding the breakdown of capital investment and operating costs.The study is based on pilot-scale experimental results using tubular PBR in Norway. This TEA shows that 29.48 t of biomass per ha of facility and year would be a real productivity. At PBR scales of 1 and 100 ha, microalgae could be produced for 108.26 or 44 €/kg DW of harvested biomass respectively. Artificial light is indispensable for microalgae production in Norway, as its absence would represent a 50% lower productivity and a cost increase of 95%. Producing the final product as a powder represents a 1.20% greater cost. Not only does the production under more favourable climatic conditions (southern Spain) removes the need for artificial lights and greenhouses, but it also would imply greater productivity (39.02 t/ha/year) and a reduced cost (23.08 €/kg DW of disrupted and dry biomass) at a scale of 100 ha.The main factor affecting CAPEX is the PBR, which range from 49.48 to 96.37% of the MEC. As for OPEX, the most critical elements vary with the projection: labour, energy, utilities, and other costs. The competitiveness of microalgae for aquaculture depends on a combination of different factors. Reducing the cost of the PBR and greenhouse, increasing the PE and widening the temperature range of the culture could reduce the cost by a further 76%.

Direct processing of alginate-immobilized microalgae into polyhydroxybutyrate using marine bacterium of Saccharophagus degradans

Alginate immobilized microalgae (AIM) was found efficient in algal cells separation and pollutants removal, however, its processing required alginate removal. In present study, polysaccharide-degrading bacterium of Saccharophagus degradans was used to biodegrade alginate and microalgae in AIM and produce polyhydroxybutyrate (PHB). Results showed that AIM cultivated in wastewater contained 34.0% carbohydrate and 45.7% protein. S. degradans effectively degraded and utilized polysaccharide of AIM to maintain five-day continuous growth at 7.1–8.8 log CFU/mL. Compared with glucose, S. degradans metabolism of mixed polysaccharide in AIM maintained the medium pH at 7.1–7.8. Increasing the inoculum concentration did not enhance AIM utilization by S. degradans due to the carbon catabolite repression of glucose which likely inactivated hydrolysis enzymes. PHB production in S. degradans peaked at 64.9 mg/L after 72 h cultivation but was later degraded to provide energy. Conclusively, S. degradans was effective in direct processing of AIM while showing potential in PHB production.

Pulsed microwave pretreatment of fresh microalgae for enhanced lipid extraction

Pulsed microwave (PMW) is considered as an energy-saving pretreatment for microalgae. The efficiency of PMW was studied using a generator delivering square-pulsed modulated microwave in continuous flow on fresh Auxenochlorella protothecoides suspension. The efficiency was evaluated by measuring the increase of the suspension's conductivity, the liberation of carbohydrates, the percentage of permeabilized microalgae cells and the lipid yield after solvent extraction. The properties of the pulses i.e. pulse duration, repetition rate and pulse power had little effect on the efficiency and especially on lipid extraction performance. Lipid yield was positively correlated with the energy input and increased from 3.81% to 38.42% with microwave energy input increasing from 1.4 to 2.8 MJ/kgDW (Dry Weight). At a given PMW absorbed energy, the lipid yield decreased with the increase of algal concentration, whereas it increased with the suspension flow rate. Based on comparison with water-bath heating i.e. a pure thermal treatment, results suggest that both the microwave induced heating and non-thermal effects impact the efficiency of PMW treatment. An energy consumption of 2.53 MJ/kgDW achieved 37.29% lipid yield, which confirms that PMW is a potentially competitive, highly efficient and easy to implement method that could benefit downstream processing of microalgae.

Insights into hydrothermal process of microalgae via novel modified kinetic model and thermodynamic analysis

Hydrothermal processing is a promising approach for microalgae biorefinary. Design and optimization of hydrothermal process of microalgae require kinetic and thermodynamic analysis. Here, we report a phenomenological model based on classical Arrhenius equation to describe the hydrothermal hydrolysis of microalgae using the Chlorella sp. as model species. We specifically focused on the role of various severity factor (SF, 1.34–6.94) as a function of pretreatment temperature and time to assess the recovery of aqueous, carbohydrate concentrations, protein, and by-products. The aqueous-phase yield of Chlorella sp. reached 50.83% at a SF of 5.038 (200 °C, 120 min). SF had a good correlation with the aqueous-phase yield (R2 = 0.64) with an activation energy of 48.68 kJ/mol. Moreover, thermodynamic analysis evidenced the positive values of the enthalpy change, the entropy change and Gibbs free energy change. These results reveal the nature of being non-spontaneous, endothermic and irreversible for hydrothermal processing of microalgae.

Cultivation and Processing of Microalgae for Its Sustainability as a Feedstock for Biodiesel Production

Microalgae are becoming sustainable alternative feedstocks to food crops for biodiesel production which can also solve the problems associated with the use of fossil fuels. However, several challenges about microalgae’s cultivation, harvesting, pre-treatment and extraction processes as well as the technology of biodiesel production affect its sustainability. This study proffers solutions to these challenges and recommended that hybrid culture systems with genetically engineered microalgal species would overcome the challenges of cultivation. The coagulation/flocculation method was adjudged the best harvesting process of the microalgae for its sustainability for biodiesel production. The pre-treatment by ultrasound coupled with enzymatic extraction was suggested best, due to their numerous advantages over other methods. A novel integrated ultrasound-enzyme-enzyme in-situ pre-treatment-extraction-transesterification design is considered a sustainable approach to utilising microalgae biomass for biodiesel production. The study concludes that the microalgae biomass is more than sufficient to meet the global energy demand and can be economically harnessed as a sustainable feedstock for biodiesel production.
 HIGHLIGHTS
 •Microalgae contain sufficient characteristics for their sustainability for biodiesel production.• Implementation of genetic strategies of microalgal species by cultivating in a hybrid system is the key to microalgae sustainability.• Harvesting of microalgae by coagulation/flocculation method would promote its efficient lipid recovery.• Microalgae are novel feedstocks with a rigid cell wall, its lipid extraction requires the use of effective and efficient pre-treatment.• The ultrasound-enzymatic extraction and enzymatic transesterification in an in-situ process can sustainably utilise microalgae biomass for biodiesel production.

Microalgae-based bioplastics: Future solution towards mitigation of plastic wastes

Global demand for plastic materials has severely harm the environment and marine sea life. Therefore, bioplastics have emerged as an environmentally friendly alternative due to sustainability, minimal carbon footprint, less toxicity and high degradability. This review highlights the sustainable and environmentally friendly approach towards bioplastic production by utilizing microalgae as a feed source in several ways. First, the microalgae biomass obtained through the biorefinery approach can be processed into PHA under certain nutrient limitations. Additionally, microalgae biomass can act as potential filler and reinforcement towards the enhancement of bioplastic either blending with conventional bioplastic or synthetic polymer. The downstream processing of microalgae via suitable extraction and pre-treatment of bioactive compounds such as lipids and cellulose are found to be promising for the production of bioplastics. Moving on, the intermediate processing of bioplastic via lactic acid synthesized from microalgae has favoured the microwave-assisted synthesis of polylactic acid due to cost efficiency, minimum solvent usage, low energy consumption, and fast rate of reaction. Moreover, the reliability and effectiveness of microalgae-based bioplastics are further evaluated in terms of techno-economic analysis and degradation mechanism. Future improvement and recommendations are listed towards proper genetic modification of algae strains, large-scale biofilm technology, low-cost cultivation medium, and novel avocado seed-microalgae bioplastic blend.

Selection of Culture Conditions and Cell Morphology for Biocompatible Extraction of β-Carotene from Dunaliella salina.

Biocompatible extraction emerges recently as a means to reduce costs of biotechnology processing of microalgae. In this frame, this study aimed at determining how specific culture conditions and the associated cell morphology impact the biocompatibility and the extraction yield of β-carotene from the green microalga Dunaliella salina using n-decane. The results highlight the relationship between the cell disruption yield and cell volume, the circularity and the relative abundance of naturally permeabilized cells. The disruption rate increased with both the cell volume and circularity. This was particularly obvious for volume and circularity exceeding 1500 µm3 and 0.7, respectively. The extraction of β-carotene was the most biocompatible with small (600 µm3) and circular cells (0.7) stressed in photobioreactor (30% of carotenoids recovery with 15% cell disruption). The naturally permeabilized cells were disrupted first; the remaining cells seems to follow a gradual permeabilization process: reversibility (up to 20 s) then irreversibility and cell disruption. This opens new carotenoid production schemes based on growing robust β-carotene enriched cells to ensure biocompatible extraction.

Highly dispersible magnetic nanoparticles modified by double quaternary ammonium surfactants for efficient harvesting of oleaginous microalgae

Microalgae have been known as a promising sustainable resource for bioenergy cleaner production. Herein, a series of highly dispersible novel magnetic quaternary ammonium cationic surfactants (Fe3O4@DQn, n = 1, 2, 3) for the efficient harvesting of oleaginous Chlorella pyrenoidosa (C. pyrenoidosa) have been investigated. The Fe3O4@DQn capture microalgae process can be divided into a three-step operation (i.e., flocculation, separation, and recycle). For harvesting C. pyrenoidosa, the Fe3O4@DQn has both a high recovery efficiency (>98.4%) and a short flocculation time (2 min). In addition, the reused Fe3O4@DQ2 can maintain a high recovery efficiency (92.31%) with five cycling times. Moreover, the N-[3-(Trimethoxysilyl)propyl]ethylenediamine (TMPED) amount and the pH value both have a positive influence on the C. pyrenoidosa harvesting. It is worth noting that the dual effect of quaternary ammonium cationic surfactant, strong positively charged and hydrophobic properties, leads to a higher harvesting efficiency of microalgae. Furthermore, the results of particle size distribution and turbiscan stability index (TSI) show that a higher specific surface area, a smaller polydispersity index and TSI value of the Fe3O4@DQn can make a more excellent adsorption and dispersion properties. Finally, the Fe3O4@DQn might provide a promising high cost-performance to harvesting of oleaginous microalgae due to the better economic viability.

Fractionation of phycocyanin and carbohydrate from Spirulina platensis using ionic liquid-based aqueous two-phase system

Microalgae have gained considerable attention due to their high-value biomolecules and potential applications in the pharmaceutical, food, medical and cosmeceutical field. However, the conventional biorefinery process of microalgae are costly, energy-intensive, and time-consuming. Aqueous two-phase system (ATPS) has emerged as a potential technique for the separation and fractionation of biomolecules in the biorefinery field. This study proposed the application of ionic liquid (IL) based ATPS for the fractionation of high-value phycocyanin and carbohydrates from a crude extract of Spirulina platensis.The biomass was first lysed by a high-speed homogenization with a solid to liquid ratio (S/L) of 1:10 and an operation time of 5 min to achieve optimum yields of multiple products. Next, the feasibility of several IL-based ATPS with phosphate/citrate buffer was evaluated by investigating the effects of cation, anion, and alkyl chain’s length of ILs. Among the IL-based ATPS, the system comprising of 1-butyl-1-methylpyrrolidinium dicyanamide and citrate buffer demonstrated the optimum phycocyanin extraction efficiency of 83.26 ± 0.05% at the top phase and a concurrent recovery of 73.89±0.06% carbohydrate at the bottom phase. In this work, the IL-based ATPS performed better than conventional polymer-based ATPS. This work suggests that IL-based ATPS allows efficient fractionation of phycocyanin and carbohydrates.