Micellar Systems Research Articles

Coadministration of Quercetin and Indocyanine Green via PEGylated Phospholipid Micelles for Augmented Chem-Photothermal Combination Tumor Therapy.

A significant impediment persists in developing multicomponent nanomedicines designed to dismantle the heat shock protein (HSP)-based protective mechanism of malignant tumors during photothermal therapy. Herein, well-defined PEGylated phospholipid micelles were utilized to coencapsulate quercetin (QUE, a natural anticancer agent and potent HSP inhibitor) and indocyanine green (ICG, a photothermal agent) with the aim of achieving synchronized and synergistic drug effects. The subsequent investigations validated that the tailored micellar system effectively enhanced QUE's water solubility and augmented its cellular internalization efficiency. Intriguingly, the compositional PEGylated phospholipids induced extraordinary endoplasmic reticulum stress, thereby sensitizing the tumor cells to QUE. Furthermore, QUE played a crucial role in inhibiting the stress-induced overexpression of HSP70, thereby augmenting the photothermal efficacy of ICG. In systemic applications, the proposed nanotherapeutics exhibited preferential accumulation within tumors and exerted notable tumoricidal effects against 4T1 xenograft tumors under 808 nm near-infrared irradiation, facilitated by prominent near-infrared fluorescence imaging-guided chemo-photothermal therapy. Therefore, our strategy for fabricating multicomponent nanomedicines emerges as a coordinated platform for optimizing antitumor therapeutic efficacy and offers valuable insights for diverse therapeutic modalities.

Influence of chirality and sequence in lysine-rich lipopeptide biosurfactants and micellar model colloid systems

Lipopeptides can self-assemble into diverse nanostructures which can be programmed to incorporate peptide sequences to achieve a remarkable range of bioactivities. Here, the influence of peptide sequence and chirality on micelle structure and interactions is investigated in a series of lipopeptides bearing two lysine or D-lysine residues and tyrosine or tryptophan residues, attached to a hexadecyl lipid chain. All molecules self-assemble into micelles above a critical micelle concentration (CMC). Small-angle x-ray scattering (SAXS) is used to probe micelle shape and structure from the form factor and to probe inter-micellar interactions via analysis of structure factor. The CMC is obtained consistently from surface tension and electrical conductivity measurements. We introduce a method to obtain the zeta potential from the SAXS structure factor which is in good agreement with directly measured values. Atomistic molecular dynamics simulations provide insights into molecular packing and conformation within the lipopeptide micelles which constitute model self-assembling colloidal systems and biomaterials.

Supramolecular engineering of micellar systems: Precision control on self-assembly, polarity, and charge for enhanced nanocarrier design

In the quest for enhanced drug delivery systems, the combination of supramolecular receptors and surfactants represents a promising step toward developing innovative and highly efficient nanocarriers. This research highlights the paramount advantages of synergizing these elements, focusing on the manipulation of the self-assembly, charge, and polarity of the hybrid nanostructures resulting from merging these building blocks. In this vein, this work reveals that the integration of hexamethylated p-sulfonatocalix[6]arene (SC6A) and dodecyltrimethylammonium bromide (DTAB) offers significant advantages over those colloidal nanostructures stemming from the use of surfactant alone. These include the ability to stimulate early self-assembly, thereby facilitating the formation of stable nanocarriers, even in high-dilution scenarios. Additionally, the electrostatic balance established within the macrocycle-surfactant host–guest complexes can be harnessed to finely adjust the charge of the hydrophilic micellar corona. This holds great promise for modulating the bio-interaction capabilities of nanocarriers. Furthermore, the inclusion of the macrocycle in the colloidal structure induces significant alterations in the arrangement of low-molecular-weight surfactants. This leads to a significant transformation in the hydrophobic properties of the micellar core, which can be exploited to tailor this microenvironment to match the lipophilicity of specific drugs. In this regard, our findings reveal that while conventional DTAB micelles generally replicate the polarity of a solvent with a dielectric constant of 37.7, engineered SC6A-DTAB aggregates demonstrate a capability to reach a polarity akin to a solvent with dielectric constant of 17.5. This spectrum of hydrophobicities within the micellar core represents a significant advancement and opens up new possibilities for drug delivery applications.

Steady State and Time-Resolved Fluorescence Spectroscopy of Cinchonine Dication in Sodium Dodecylsulphate Micellar System.

This paper reports the influence of surface charge of the micelles on to the photophysical properties of a cinchonine dication (C2+) fluorophore in anionic, sodium dodecylsulphate (SDS), surfactant at premicellar, micellar and post-micellar concentrations in aqueous phase at room temperature. The magnitude of edge excitation red shift (EERS) in the fluorescence maximum of C2+ in bulk water solution is 1897cm- 1 whereas, in the case of SDS it is observed to be 1984cm- 1. The fluorescence decay curve of C2+ fits with multi exponential functions in the micellar system. The increase in lifetime of C2+ in SDS has been attributed to the increase in radiative rate due to the incorporation of C2+ at the micelle -water interface. The value of dynamic quenching constant determined is 16.9 M- 1. The location of the probe molecule in micellar systems has been justified by a variety of spectral parameters such as dielectric constant, ET (30), viscosity, EERS, average fluorescence decay time, radiative and non-radiative rate constants. All experimental results suggest that the C2+ molecule binds strongly with the SDS micelles and resides at micellar-water interface. The binding constant (Kb) calculated (3.85 × 105 M- 1) for C2+ in SDS revealed that the electrostatic forces mediate charge probe-micelle association.

Targeted Polymeric Micelles System, Designed to Carry a Combined Cargo of L-Asparaginase and Doxorubicin, Shows Vast Improvement in Cytotoxic Efficacy.

L-asparaginases (ASP) and Doxorubicin (Dox) are both used in the treatment of leukemia, including in combination. We have attempted to investigate if their combination within the same targeted delivery vehicle can make such therapy more efficacious. We assembled a micellar system, where the inner hydrophobic core was loaded with Dox, while ASP would absorb at the surface due to electrostatic interactions. To make such absorption stronger, we conjugated the ASP with oligoamines, such as spermine, and the lipid components of the micelle-lipoic and oleic acids-with heparin. When loaded with Dox alone, the system yielded about a 10-fold improvement in cytotoxicity, as compared to free Dox. ASP alone showed about a 2.5-fold increase in cytotoxicity, so, assuming additivity of the effect, one could expect a 25-fold improvement when the two agents are applied in combination. But in reality, a combination of ASP + Dox loaded into the delivery system produced a synergy, with a whopping 50× improvement vs. free individual component. Pharmacokinetic studies have shown prolonged circulation of micellar formulations in the bloodstream as well as an increase in the effective concentration of Dox in micellar form and a reduction in Dox accumulation to the liver and heart (which reduces hepatotoxicity and cardiotoxicity). For the same reason, Dox's liposomal formulation has been in use in the treatment of multiple types of cancer, almost replacing the free drug. We believe that an opportunity to deliver a combination of two types of drugs to the same target cell may represent a further step towards improvement in the risk-benefit ratio in cancer treatment.

Anti-turbulent efficiency of oil-soluble polymer solutions and colloid systems flowing through cylindrical channel

Relevance. The use of anti-turbulent additives for transporting hydrocarbon liquids through main pipelines allows reducing significantly the energy consumption of pumping power stations. Aim. Comparative analysis of the anti-turbulent efficiency of high-molecular polymers and compositions of surfactants. Methods. Laboratory-scale experimentation aimed to study the flow of dilute polymer solutions and dispersed surfactant systems through a cylindrical channel of a turbulent rheometer. Results. The author has carried out the comparative experimental studies of the anti-turbulent efficiency of extremely dilute solutions of polymers and colloidal systems. The results were obtained that suggest a higher anti-turbulent efficiency of high-molecular-weight polymers compared to micellar surfactant systems. Solutions of high molecular weight polybutadiene and aluminum polyhydroxydicarboxylates in gasoline were used as samples for the experimental comparison of hydrodynamic efficiency. The paper describes the laboratory setup, on which the studies were carried out, and introduces the formulas used for quantitative calculations. The structure of polymer solutions and colloidal systems is considered and a theoretical explanation is given for the preferential use in industrial practice of high-molecular polymers in extremely low concentrations in real pipelines. It was found out that the mechanisms of degradation of antiturbulent properties of polymer solutions and dispersed surfactant systems are different. This is due to the difference in the structure of macromolar coils of polymer with an immobilized solvent and that of micelles from low molecular amphiphilic compounds. The paper introduces the arguments that explain the degradation of the antiturbulent properties of polymers not by the destruction of carbon-chain macromolecules, but by decomposition in a turbulent flow of the original large associates, consisting of a large number of chains, into individual and smaller macromolecular coils with an immobilized solvent.

Pyranine Interaction with Amines in Micelles.

The fluorescence behavior of pyranine in anionic micellar system of sodium dodecyl sulphate was studied in the presence of selected amines. The amines included cyclopropylamine (CPA), ethylenediamine (EDA), benzylamine (BA), dibutylamine (DBA), cyclohexylamine (CHA), and polyethylenediamine (PEDA). All the studied amines quenched the intensity of pyranine. Study was performed in 0.05M and 0.1M SDS. The thermodynamic parameters were determined in order to understand the quenching of pyranine by the studied amines. Change in Gibbs free energy and quenching was found higher in 0.05M SDS concentration and was found lower when SDS concentration was increased to 0.1M SDS. Pyranine quenching by the amines studied were treated with an extended Stern-Volmer equation that produced the Stern-Volmer constant ([Formula: see text]). Binding constant (Kb), number of binding stoichiometry (n) and Gibbs free energy change (ΔGbinding) were found higher for lower surfactant concentration as compare to higher surfactant concentration. More negative (-ve) the Gibbs free energies more will be the quenching, higher will be the sensitivity and vice versa. The Gibbs free energies for all the studied amines were found in the order as cyclopropylamine > ethylenediamine > benzylamine > dibutylamine > cyclohexylamine > polyethylenediamine. Fluorescence quenching of pyranine by amines in aqueous SDS is reproducible and is useful for the determination of amines in environmental samples.

Ecofriendly micellar mediated spectrofluorimetric method for ultrasensitive quantification of the antiparkinsonian drug safinamide in pharmaceutical formulation and spiked human plasma

A novel, highly sensitive and eco-friendly micellar-mediated spectrofluorimetric method was developed and validated for the determination of the novel antiparkinsonian drug safinamide mesylate in the presence of its related precursor impurity, 4-hydroxybenzaldehyde. The proposed approach relies on increasing the inherent fluorescence emission at 296 nm of safinamide, by forming hydrogen bonds between the mentioned drug and sodium dodecyl sulfate in the micellar system using 0.1 N HCl as a solvent, following excitation at 226 nm. A thorough investigation was conducted into the experimental factors affecting spectrofluorimetric behavior of the studied drug. A linearity plot of safinamide over the concentration range of 10.0–1000.0 ng/mL against the relative fluorescence intensities was established. The proposed method demonstrated excellent sensitivity down to the nano-gram level with detection and quantitation limits of 1.91 and 5.79 ng/mL, respectively. The studied drug was effectively determined in Parkimedine® Tablets. Furthermore, the proposed method allows for ultrasensitive quantification of safinamide in spiked human plasma, with satisfactory percentage recovery (98.97–102.28%). Additionally, the greenness assessment using the advanced green certificate classification approach, the complementary green analytical procedure index (Complex-GAPI), and the analytical GREEness metric approach (AGREE), along with the practicality check using the Blue Applicability Grade Index in addition to the all-inclusive overall whiteness evaluation using the RGB-12 model were carried out. The outcomes demonstrated the effectiveness and whiteness of the proposed technique. Clearly, the suggested approach has the advantages of being simple, requiring no pretreatment steps, and relying solely on direct measuring procedures.

Tailoring lyotropic liquid crystals for skin barrier penetration: Exploring composition and structure–function relationships

Lyotropic liquid crystals (LLCs) have garnered attention as a promising nanocarrier delivery system for enhancing skin permeation owing to their unique structural properties, such as improved drug loading and controlled drug release and versatility. LLCs are greatly explored for topical drug delivery owing to their strong bio-adhesive nature and structural similarity to the biological membranes when applied topically, which improves skin retention and permeation of the drugs. This review explores the functionality of structural design, especially the optimization of micellar systems, hexagonal and lamellar phases, and bicontinuous cubic and sponge phases, to achieve efficient skin permeation of therapeutic loaded LLCs. Furthermore, customization of surfactant to achieve skin compatibility and permeation is explored along with incorporating molecular modifications, functionalization, and the influence of surfactant hydrophilic–lipophilic balance. Additionally, the review illuminates the impact of LLCs curvature and the engineering of ordered and disordered phases for optimal drug release. Emerging advanced techniques such as surface modification with various ligands, stimuli-responsive LLCs for on-demand drug release, and combination therapies with multifunctional LLCs for synergistic effects that can promote targeted and site-specific drug delivery have also been discussed. The detailed findings have been discussed in this review with appropriate case studies. Challenges and future perspectives in designing and formulating LLCs for skin permeation are addressed to ignite future research. The knowledge and advancements presented in this review pave the way for developing next-generation LLCs-based systems, enabling enhanced permeation through the skin and opening new possibilities in the treatment of various dermatological conditions.

The role of chelating agent in the self-assembly of amphoteric surfactants

Hypothesis: Limited research has been conducted on the influence of chelating agents on the self-assembly process in surfactant solutions. The traditional approach assumes the chelating agent only interferes as a salting-out ion, therefore promoting surfactant separation. However, the opposite behavior has been observed for iminodipropionate based surfactants, in which the presence of chelating agents of the aminopolycarboxylate type increases solubility of nonionic ethoxylated surfactants in mixed micellar systems. Specific interaction between chelating agents-surfactants can be an important parameter in the self-assembly processes.Experiments: Physicochemical properties of solutions containing amphoteric surfactant and tetrasodium glutamatediacetate have been investigated. Macroscopic properties, such as viscosity and cloud point, were evaluated in the presence of a non-water-soluble alkyl ethoxylated surfactant. Interactions between amphoteric surfactant and chelating agent were monitored by NMR spectroscopy, including 13C chemical shift and lineshape analysis as well as 1H diffusometry.Findings: The study reveals that there is an interaction between the head group of the surfactant and the chelating agent forming oligomeric surfactant analogues with larger hydrophilic moieties, which results in smaller, more spherical micelles. The combined interactions provide possibilities for tuning the aggregation behavior of systems containing surfactants and chelating agents, and with that, the macroscopic properties of the system.

Physicochemical and molecular docking studies of tween 20 in the presence of NaX salts and hydrotropes in aqueous media

An investigation has been conducted on the interaction between the plasma protein bovine serum albumin (BSA) and the surfactant T20 using various hydrotropes of sodium salt (NaX, where X is Sal and Benz). The acquired results provide a practical and efficient means to comprehend the binding process of the micellar system T20 to BSA. The predominant forces involved are hydrophobic forces and hydrogen bonding. The further study intends to investigate the impact of NaX (here, X represents Cl, Br, NO3, Sal, and Benz), on the T20 solution using various techniques including density (ρ), viscosity (η), sound velocity (U), dynamic light scattering (Dh), FT-IR spectroscopy, and molecular docking at varying temperatures. The values of ρ, η, and U increase as the concentration of Na salt increases. Conversely, when the temperature increases, the values of ρ and η fall, while the value of U increases. NaSal exhibits higher viscosity compared to other substances. The phase separation model was employed to calculate the standard Gibbs free energy ( Δ G CP 0 ), enthalpy ( Δ H CP 0 ), and entropy ( Δ S CP 0 ). The NaBenz exhibits the highest values of sound velocity while examining at different temperatures. The structural identification was performed using FT-IR data, which revealed good agreement with the available literature.

Modulation of Triton X-100 Aqueous Micelle Interface by Ionic Liquid: A Molecular Level Interaction Studied by Time-resolved Fluorescence Spectroscopy

Background: Self-assembly structure is an important area of research for understanding biological systems, owing to its resemblance to the membrane structure of the phospholipid bilayer. In a self-assembly medium, chemical reactions and chemical or physical processes are dramatically different than the bulk phase. Understanding this process in synthesizing self-assembly structures may allow us to explore various biological processes occurring in cell membranes. Objective: The study aimed to understand water dynamics in the TX-100 micellar interface via steady state and a time-resolved fluorescence spectroscopy study. The objective was also to determine the two different ionic liquids (ILs), namely 1-butyl-3-methyl imidazolium tetrafluoroborate ([bmim][BF4]) and 1-decyl-3-methyl imidazolium tetrafluoroborate ([dmim][BF4]), inducing surfactant aggregation changes at the molecular level. Also, the focus was on determining the hydration and its dynamics at the palisade layer of TX-100 micelle in the presence of two different ionic liquids. Methods: Steady state and time-resolved fluorescence spectroscopy have been used to study TX-100 micellar systems. Employing time-resolved spectroscopy, two chemical dynamic processes, solvation dynamics and rotational relaxation dynamics, have been studied to investigate structural changes in TX100 by adding ILs. Solvation dynamics was studied by measuring the time-dependent Stokes shift of the fluorescent probe. From the Stokes shift, time-resolved emission spectra were constructed to quantify the solvation dynamics. Also, using the polarization properties of light, time-resolved anisotropy was constructed to explore the rotation relaxation of the probe molecule. Results: The absorption and emission spectra of C-153 in TX-100 were red-shifted in the presence of both the ILs. Also, the C-153 experienced faster solvation dynamics and rotational relaxation with the addition of both ILs. In our previous study, we observed a significantly increased rate of solvation dynamics with the addition of [bmim][BF4] (J. Phys. Chem. B, 115, 6957-6963) [38]. However, with the addition of the same amount of [dmim][BF4], the IL rate of solvation enhancement was more pronounced than with [bmim][BF4]. The faster solvation and rotational relaxation have been found to be associated with the penetration of more free water at the TX100 micellar stern layer, leading to increased fluidity of the micellar interface. Conclusion: Upon incorporating ILs in TX100 micelle, substantially faster solvation dynamics of water as well as rotational relaxation dynamics of C-153 have been observed. By decreasing surfactant aggregations, [bmim][BF4] ILs facilitated more water molecules approaching the TX-100 micellar phase. On the other hand, [dmim][BF4] ILs comprising mixed micelles induced even more free water molecules at the palisade layer, yielding faster solvation dynamics in comparison to pure TX-100 micelle or TX100 micelle + [bmim][BF4] ILs systems. Time-resolved anisotropy study has also supported the finding and strengthened the solvation dynamics observation.

Sequential thin film microextraction and overcoated thin film microextraction devices for characterization of sparkling wine aroma profiles and partitioning equilibria

Solid Phase Microextraction (SPME) is a commonly used, robust method for characterization of aroma profiles in food matrices. However, challenges such as saturation, swelling, and competition can occur when sampling such complex matrices, resulting in decreased accuracy in the quantitation of polar compounds. In this study, sequential thin film micro-extraction (TFME) was employed to study the aroma profile of sparkling wine, with a focus to evaluate the displacement of polar analytes at extraction times longer than their corresponding equilibrium time. This investigation also describes advancements in the production of TFME devices, specifically the overcoating of hydrophilic-lipophilic balance/polydimethylsiloxane (HLB/PDMS) thin films to increase their matrix compatibility. Sequential thin film micro-extraction and overcoated HLB/PDMS thin films were evaluated for characterization of sparkling wine samples. The results were encouraging, showing that these advancements can decrease competition phenomena and increase the calibration linearity range compared to traditional micro-extraction approaches more commonly used for the characterization of such samples. In addition, multiphase equilibria investigation involving micellar systems enabled by the microextraction technology provides better understanding between wine aroma and its composition.

A Triterpene-Based bioactive drug delivery system for combined chemotherapy of liver cancer

Carrier materials always account for the majority particularly in nanosized formulations, which are administrated along with the active ingredient part might result in metabolism related toxicity. The usage of bioactive excipients could not only reduce the sided effect but also provide additional therapeutic effects. In the present study, a triterpene based micellar drug delivery system was developed using a bioactive solanesol derivative. Solanesylamine was prepared firstly followed by conjugating with poly (ethylene glycol) using maleic acid amide linkage. The amphiphilic drug carrier PEGylated (2-propyl-3-methylmaleic acid)-block-solanesol amine (mPEG-CDM-NH-SOL) could be formed into micelles and loaded with doxorubicin (DOX) inside. The micelles were about 112 nm in size and the drug loading content was about 5.97 wt%. An acid triggered drug release behavior was obviously observed for the DOX loaded pH-sensitive micelle mPEG-CDM-NH-SOL-DOX. While not for DOX-loaded micelles without pH-sensitivity (mPEG-NHS-NH-SOL). CCK8 assay showed that the micelles of PEGylated solanesylamines exhibited certain inhibitory effect on tumor cells at high concentration and the pH sensitive ones seemed more toxic. In vivo studies showed that the pH sensitive mPEG-CDM-NH-SOL-DOX had a superior anti-tumor effect, indicating its great potential in cancer treatment.

Cytotoxicity and bioavailability assessment from micellar system based Thiamine-Phospholipid complexes

Poor absorption (3–5 %) of thiamine hydrochloride (TH), is primarily concerned with impaired permeability across intestinal mucosa. To modulate the permeability of TH, a phospholipid (PL) interaction-based hydrophobic complex of thiamine was investigated. Using the solvent evaporation approach, thiamine-phospholipid complexes (TPCs) were prepared between free bases of thiamine and PLs in the weight ratio (1:1, 1:2, and 2:1) and characterized using FTIR, spectrophotometry, XRD, and conductometric methods. Electrical conductivity and partition coefficient studies demonstrated that TPCs were hydrophobic transformations formed via PL interaction with a free thiamine base. TPCs were embedded into the micellar system (Tween20/Ethanol), characterized by electrical conductivities and zeta-sizing studies, and exploited in its micellar delivery system design. TPC 1:1 & 1:2 had much lower conductivity than TH and its physical mixture (TH/PL) in the Tween20/Ethanol environment diluted with an aqueous phase. The average size of micellar systems loaded with TPC (10 % w/w) was within the range of 12–25 nm, and conductivity was in the range of 122-130µS/cm. In vitro release characterization from complexes and their micellar systems in HCl 1.2, phosphate buffer (PB) 6.8, and bidistilled water showed a delayed release pattern. TPC modulated the intestinal permeability of thiamine as revealed from ex vivo studies. TPC (1:1) and its micellar system produced significant differences in drug permeability (p < 0.001) compared to TH and physical mixture. Pharmacokinetic assessment of the micellar system of complexes in Wistar rats showed that the TPC (1:1) loaded micellar system produced a 2.4-fold enhancement of AUC(0−24) over (TH) followed by oral administration. Assessment of cell viability in mouse fibroblast cell line (L929) culture showed that TPC or micellar system did not inhibit cell growth and was safe at various concentration levels. TPc complexes developed using phospholipid complexation yield hydrophobic transformation in TH and their micellar system-based delivery modulates the intestinal permeability and bioavailability enhancement.

Advancements in Solubility Enhancement of Omeprazole: A Comprehensive Review

Omeprazole, a widely prescribed proton pump inhibitor renowned for its effectiveness in treating gastrointestinal disorders, faces limitations in its therapeutic potential due to its poor aqueous solubility, resulting in suboptimal bioavailability. This article conducts a thorough review of recent advancements in strategies aimed at enhancing omeprazole's solubility. The evaluation encompasses various techniques, including solid dispersion technology, nanosizing, cyclodextrin complexation, salt formation, and micellar delivery systems, all aimed at improving the solubility and overall therapeutic performance of omeprazole. The review addresses existing challenges and outlines future prospects, with a specific focus on the translation of solubility enhancement strategies from laboratory settings to commercial production. The comprehensive insights presented contribute to a profound understanding of the recent advancements in solubility enhancement of omeprazole, fostering the development of more efficient and patient-friendly formulations for improved therapeutic outcomes.

Deep eutectic solvent self-assembled reverse nanomicelles for transdermal delivery of sparingly soluble drugs

BackgroundTransdermal delivery of sparingly soluble drugs is challenging due to their low solubility and poor permeability. Deep eutectic solvent (DES)/or ionic liquid (IL)-mediated nanocarriers are attracting increasing attention. However, most of them require the addition of auxiliary materials (such as surfactants or organic solvents) to maintain the stability of formulations, which may cause skin irritation and potential toxicity.ResultsWe fabricated an amphiphilic DES using natural oxymatrine and lauric acid and constructed a novel self-assembled reverse nanomicelle system (DES-RM) based on the features of this DES. Synthesized DESs showed the broad liquid window and significantly solubilized a series of sparingly soluble drugs, and quantitative structure-activity relationship (QSAR) models with good prediction ability were further built. The experimental and molecular dynamics simulation elucidated that the self-assembly of DES-RM was adjusted by noncovalent intermolecular forces. Choosing triamcinolone acetonide (TA) as a model drug, the skin penetration studies revealed that DES-RM significantly enhanced TA penetration and retention in comparison with their corresponding DES and oil. Furthermore, in vivo animal experiments demonstrated that TA@DES-RM exhibited good anti-psoriasis therapeutic efficacy as well as biocompatibility.ConclusionsThe present study offers innovative insights into the optimal design of micellar nanodelivery system based on DES combining experiments and computational simulations and provides a promising strategy for developing efficient transdermal delivery systems for sparingly soluble drugs.

Desosomes and desimicelles − a novel vesicular and micellar system for enhanced oral delivery of poorly soluble drug: Optimization of in vitro characteristics and in vivo performance

This study introduces two innovative nanocarrier systems to improve oral drug delivery. Desosomes and desimicelles combine Deep eutectic solvent (DES) with vesicular or micellar nanosystems, respectively. These novel nanosystems integrate the DES solubilization potency for administering drugs with low aqueous solubility and the vesicular and micellar systems to bypass physiological barriers and improve poor drug bioavailability. Lornoxicam (LRX) is a BCS class II anti-inflammatory with limited aqueous solubility and rapid clearance. Desosomes and desimicelles were prepared and successfully optimized. The optimization depended on particle size, zetapotential, entrapment efficiency, and solubility. The optimized desosomes (LRX-DES-V) and desimicelles (LRX-DES-M) were pictured by transmission electron microscope. Differential scanning calorimetry (DSC) and FTIR analysis indicated the successful inclusion of LRX inside each system. Invitro LRX release profiles revealed controlled release of LRX-DES-V and LRX-DES-M, with more sustained release by the later one. In-vivo study, inflammation was induced using a carrageenan rat model, and the anti-inflammatory effect of LRX-pure, marketed product, traditional niosomes, LRX-DES-V & LRX-DES-M were determined using inhibition %, serum inflammatory cytokines, and histopathology. After 4 h of induction, LRX-DES-M (68.05%) showed a significant inhibition compared to LRX-DES-V (63.57%). LRX-DES-M also showed a better reduction in COX2, PGE2, and TNF-α (1.25-fold, 1.24-fold, and 1.36-fold inhibition), respectively, compared to LRX-DES-V. We can conclude that LRX-DES-V and LRX-DES-M showed better effects than all other groups and that LRX-DES-M might be more effective than LRX-DES-V.

Gold nanoparticles assisted colorimetric sensing of paroxetine, duloxetine, and olanzapine in aqueous and micellar systems with improved sensitivity

The present study explored a rapid and facile colorimetric identification of two antidepressants (paroxetine and duloxetine) and one antipsychotic drug (olanzapine) in aqueous and micellar systems using citrate-stabilized gold nanoparticles (Cit-AuNPs). The sensing approach involved hydrogen bonding and electrostatic interactions on the surface of Cit-AuNPs. The attributes of Cit-AuNPs and their interactions with the drugs were probed using characterization techniques like UV–Vis spectroscopy, scanning electron microscopy (SEM), dynamic light scattering (DLS), zeta potential measurement, and Fourier-transform infrared spectroscopy (FT-IR). Various factors including the volume of Cit-AuNPs, pH, reaction time, surfactant concentration, and the sequence of addition of reagents were optimized to inspect their impacts on sensing results. Under optimized conditions, the probe showed good linearity for the three drugs at the nanomolar (nM) range. Consequently, the color of the Cit-AuNP solution transformed from red to royal purple and blue, which was visible to the naked eye and monitored by visible absorption spectra. This label-free optical detection approach could recognize paroxetine (Prx), duloxetine (Dlx), and olanzapine (Olz) in aqueous system at concentrations ranging from 1 to 17 nM with a limit of detection (LOD) of 0.312, 0.258, and 0.418 nM (S/N = 3), respectively. Meanwhile, the sensitivity was improved in the Triton X-100 (TX-100) micellar system with LOD of 0.029, 0.030, and 0.029 nM for Prx, Dlx, and Olz, respectively accompanied by a shift in the absorption bands. The micellar system contributes stability to the Cit-AuNP-drug complex. The devised colorimetric approach was convenient and did not require any complex equipment. It was efficaciously used to detect three drugs in pharmaceutical products, spiked human urine, and blood serum samples with satisfactory recoveries of 99.83–103.45% and RSD < 3.5%. Notably, the sensing assay demonstrated good selectivity for three drugs in the existence of commonly encountered foreign species and certain common drugs with a relative error below 3%. The results of the present study were statistically compared with reference methodology. The results were validated with no significant difference between the devised and reported approaches considering precision and accuracy, respectively.

Colloidal and Biological Characterization of Dual Drug-Loaded Smart Micellar Systems.

Smart polymeric micelles (PMs) are of great interest in drug delivery owing to their low critical micellar concentration and sizes. In the present study, two different pH-sensitive poly(2-vinyl pyridine)-b-poly(ethylene oxide) (P2VP-b-PEO) copolymer samples were used for the encapsulation of paclitaxel (PTX), ursolic acid (UA), and dual loading of PTX and UA. Based on the molecular features of copolymers, spherical PMs with sizes of around 35 nm and 140 nm were obtained by dialysis for P2VP55-b-PEO284 and P2VP274-b-PEO1406 samples, respectively. The micellar sizes increased after loading of both drugs. Moreover, drug encapsulation and loading efficiencies varied from 53 to 94% and from 3.2 to 18.7% as a function of the copolymer/drug ratio, molar mass of copolymer sample, and drug type. By FT-IR spectroscopy, it was possible to demonstrate the drug loading and the presence of some interactions between the polymer matrix and loaded drugs. In vitro viability was studied on 4T1 mammary carcinoma mouse cells as a function of time and concentration of drug-loaded PMs. UA-PMs and free PMs alone were not effective in inhibiting the tumor cell growth whereas a viability of 40% was determined for cells treated with both PTX- and PTX/UA-loaded PMs. A synergic effect was noticed for PTX/UA-loaded PMs.