Recovery Method Research Articles

Semi-Interpenetrating Polymer Network Anion Exchange Membranes Based on Quaternized Polybenzoxazine and Poly(Vinyl Alcohol-Co-Ethylene) for Acid Recovery by Diffusion Dialysis.

Acid recovery from acidic waste is a pressing issue in current times. Chemical methods for recovery are not economically feasible and require significant energy input to save the environment. This study reported a semi-interpenetrating polymer network (semi-IPN) anion exchange membranes (AEMs) for acid recovery by diffusion dialysis with excellent dimensional stability, high oxidation stability, good acid dialysis coefficient (UH +) and high separation factor (S). Semi-IPN AEMs are prepared by ring-open cross-linked quaternized polybenzoxazine (AQBZ) with poly(vinyl alcohol-co-ethylene), where AQBZ is obtained by Mannich reaction and Menshutkin reaction. All four proportions of semi-IPNs exhibit clear micro-phase separation, which is conducive to ion transport. The water uptake (WU) of the four semi-IPNs ranges from 14.2 % to 19.2 %, while the swelling ratio (SR) remains between 8.7 % and 11.3 %. These results indicate that the cross-linked structure in the designed semi-IPNs effectively control swelling and ensure dimensional stability. The thermal degradation temperature (Td5) of semi-IPN4:6 to semi-IPN7:3 varies from 309 °C to 289 °C, with an oxidation stability weight loss rate (WOX) ranging from 91.5 % to 93.5 %, demonstrating excellent thermal stability and oxidation stability. The semi-IPNs also show good UH + values ranging from 11.9-16.3*10-3 m/h and high S values between 38.6 and 45.9, indicating the promising potential of the semi-IPNs.

Comparison of four methods in recovery delayed onset muscle soreness

Comparison of four methods in recovery delayed onset muscle soreness

Anomalous Electroluminescence Characteristics of Perovskite Modules.

Spatially resolved photoluminescence (PL) and electroluminescence (EL) imaging technologies play a crucial role in evaluating the performance and stability of photovoltaic devices. However, their application in perovskite devices presents unique challenges. In this study, we report a discrepancy between the electrical performance of perovskite solar modules (PSMs) and the EL images. Following the application of a reverse bias voltage, we observed an increase in EL brightness associated with prolonged carrier lifetime and transport length. Furthermore, cross-sectional Kelvin probe force microscopy identified a significant potential increase primarily at the electron-transport layer (ETL) side after reverse bias, suggesting the presence of defective ETL/perovskite interfaces with filled hole traps. To address this EL mismatch, we proposed a mild reverse current recovery method aimed at aligning EL images with the cell performance without compromising device efficiency. This approach effectively mitigates discrepancies, ensuring alignment between the device performance and EL imaging. Our study underscores that caution is required when utilizing EL imaging to monitor spatial homogeneity in PSMs for future industrial production.

Research progress and potential of new enhanced oil recovery methods in oilfield development

This paper reviews the basic research means for oilfield development and also the researches and tests of enhanced oil recovery (EOR) methods for mature oilfields and continental shale oil development, analyzes the problems of EOR methods, and proposes the relevant research prospects. The basic research means for oilfield development include in-situ acquisition of formation rock/fluid samples and non-destructive testing. The EOR methods for conventional and shale oil development are classified as improved water flooding (e.g. nano-water flooding), chemical flooding (e.g. low-concentration middle-phase micro-emulsion flooding), gas flooding (e.g. micro/nano bubble flooding), thermal recovery (e.g. air injection thermal-aided miscible flooding), and multi-cluster uniform fracturing/water-free fracturing, which are discussed in this paper for their mechanisms, approaches, and key technique researches and field tests. These methods have been studied with remarkable progress, and some achieved ideal results in field tests. Nonetheless, some problems still exist, such as inadequate research on mechanisms, imperfect matching technologies, and incomplete industrial chains. It is proposed to further strengthen the basic researches and expand the field tests, thereby driving the formation, promotion and application of new technologies.

A Proposed Method and Case Study of Waste Heat Recovery in an Industrial Application

Abstract Waste heat recovered from a refrigeration machine is associated with the double benefit of generating cold and heat with just one unit. Additional energy is required in most cases to achieve these benefits. To evaluate the efficiency of waste heat recovery, two novel efficiency indicators are described. The overhead coefficient of performance (OCOP) describes additional electrical power required to raise the temperature to make waste heat usable. The coefficient of savings describes power reduction when condenser heat is fed into a cold district heating network instead of exhausting it to high-temperature outside air. Results are reported from a case study in a food logistic center with high cooling demand in Isny, Germany. Waste heat at this facility was previously released unused to outside air. We describe how this waste heat can be used to supply sustainable heat supply to a new residential area. During the design phase, it is difficult to choose the best operating temperature for district heating networks (DHNs). The novel indicators are used to value the effort to make waste heat usable. Whereas a supply temperature of 20 °C has no disadvantages for the operator, a supply temperature of 40 °C is associated with an increase in electricity consumption. The resulting OCOPs are above 5.0 even under unfavorable conditions and exceed the theoretically calculated (Holm and Pehnt, 2023, Wärmeschutz und Wärmepumpe-Warum Beides Zusammengehört, Forschungsinstitut für Wärmeschutz e.V., Institut für Energie und Umweltforschung, München/Berlin/Heidelberg, p, 13, 14; Agora Energiewende, Fraunhofer IEG, 2023, Roll-out von Großwärmepumpen in Deutschland, Strategien für den Markthochlauf in Wärmenetzen und Industrie, Berlin) and measured (Fraunhofer Institut für Solare Energiesysteme, 2020, “Wärmepumpen in Bestandsgebäuden, Ergebnisse aus dem Forschungsprojekt, WP-Smart im Bestand.”) coefficients of performance (COPs) for air-sourced heat pumps. Although using waste heat is not free, it is beneficial when overall efficiency is considered.

Assessing the impact of geochemical mechanism and interpolation factor selection on the precision of low-salinity waterflooding modelling: a comparative study

ABSTRACT The efficacy of low salinity waterflooding (LSWF) as an enhanced oil recovery (EOR) method in carbonate formations has been well established; however, its geochemical modelling in such reservoirs remains insufficiently explored. This study aims to bridge this gap by conducting a comparative analysis of three well-recognised geochemical mechanisms including fines migration, rock dissolution/precipitation, and multi-ion exchange (MIE). Our research encompasses two parts: experimental and modelling. First, we conducted four coreflooding experiments to study the effect of LSWF on oil recovery in core scale as well as on rock wettability by measuring the contact angle of the crude oil-brine-rock system. In the next step, we created a one-dimensional compositional model in CMG-GEMTM for LSWF, validated it using the obtained experimental results, and compared the accuracy of the three geochemical mechanisms one-by-one. The results of the experimental section, confirm the positive effect of LSWF on oil recovery: 34.3% with seawater (40,000 ppm), 42.5% with LoSal-01 (10,000 ppm), 49.7% with LoSal-02 (5,000 ppm), and 60.9% with LoSal-03 (2,000 ppm). The experiments also show the wettability alteration through the reduction in the contact angle. Furthermore, the modelling results reveal that choosing MIE as the governing mechanism and sulphate concentration ([ S O 4 2 − ]) as the relevant interpolation factor (IF) leads to the most accurate LSWF model. After identifying the most accurate mechanism, we detected the wettability alteration in the model by showing the movement of oil and water relative permeability curves intersection point on the Kr-Sw diagram toward the right side.

GaussDB: A Cloud-Native Multi-Primary Database with Compute-Memory-Storage Disaggregation

Cloud-native databases have been widely deployed due to high elasticity, high availability and low cost. However, most existing cloud-native databases do not support multiple writers and thus have limitations on write throughput and scalability. To alleviate this limitation, there is a need for multi-primary databases which provide high write throughput and high scalability. In this paper, we present a cloud-native multi-primary database, GaussDB, which adopts a three layer (compute-memory-storage) disaggregation framework, where the compute layer is in charge of transaction processing, the memory layer is responsible for global buffer management and global lock management, and the storage layer is used for page and log persistence. To provide multi-primary capabilities, GaussDB logically partitions the pages to different compute nodes and then assigns the ownership of each page to a compute node. For each transaction posed to a compute node, if the compute node owns all relevant pages of this query, the compute node can process the query locally; otherwise, GaussDB transfers the ownership of relevant pages to this node. To capture data affinity and reduce page transmission costs, GaussDB designs a novel page placement and query routing method. To improve recovery performance, GaussDB employs a two-tier (memory-storage) checkpoint recovery method which uses memory checkpoints combined with on-demand page recovery to significantly improve recovery performance. We have implemented and deployed GaussDB internally at Huawei and with customers, and the results show that GaussDB achieves higher throughput, lower latency, and faster recovery than state-of-the-art baselines.

Differential toxic effects of nano-titanium dioxide on clams (Meretrix meretrix) with various individuality

Nano-TiO2 is inevitably released into aquatic environment with increasing of nanotechnology industries. Study pointed that different individuality showed divergent behavioral and physiological response when facing environmental stress. However, the effects of nano-TiO2 on tolerance of bivalves with different individualities remain unknown. In the study, clams were divided into two types of individuality - proactive and reactive by post-stress recovery method. It turned out that proactive individuals had quicker shell opening level, stronger burrowing behavior, faster feeding recovery, higher standard metabolic rate and more rapid ammonia excretion ability than reactive individuals after exposed to air. Then, the survival rate, hemocytes response and oxidase activity of classified clams were evaluated after nano-TiO2 exposure. Results showed that after 30 d exposure, proactive individuals accelerated burrowing behavior with higher survival rate. Moreover, proactive clams had better adaptability and less hemocytes response and oxidative damage than reactive clams. The study highlights the individualities of marine shell fish determine individual capacity to adapt to environmental changes, play important roles in aquaculture and coastal ecosystem health.

Selective recovery of europium from real acid mine drainage using modified Cr-MIL and SBA15 adsorbents

The successful adoption and widespread implementation of innovative acid mine drainage treatment and resource recovery methods hinge on their capacity to demonstrate enhanced performance, economic viability, and environmental sustainability compared to conventional approaches. Here, an evaluation of the efficacy of chromium-based metal–organic frameworks and amine-grafted SBA15 materials in adsorbing europium (Eu) from actual mining wastewater was conducted. The adsorbents underwent comprehensive characterization and examination for their affinity for Eu. Cr-MIL-PMIDA and SBA15-NH-PMIDA had a highest Langmuir adsorption capacity of 69 mg/g and 86 mg/g, respectively, for an optimum level of pH 4.8. Preferential adsorption tests followed using real AMD collected at a disused mine in the north of Norway. A comparative study utilizing pH-adjusted real AMD revealed that Cr-MIL-PMIDA (88%) exhibited slightly higher selectivity towards Eu compared to SBA15-NH-PMIDA (81%) in real mining wastewater. While Cr-MIL-PMIDA displays excellent properties for the selective recovery of REEs, practical challenges related to production costs and potential susceptibility to chromium leaching make it less appealing for widespread applications. A cost–benefit analysis was then undertaken to quantify the advantages of employing SBA15-NH-PMIDA material. The study disclosed that 193.2 g of EuCl3 with 99% purity can be recovered by treating 1000 m3 of AMD.

To Stick or Not to Stick? Studying the Impact of Offset Recovery Techniques During Mid-Air Interactions.

During mid-air interactions, common approaches (such as the god-object method) typically rely on visually constraining the user's avatar to avoid visual interpenetrations with the virtual environment in the absence of kinesthetic feedback. This paper explores two methods which influence how the position mismatch (positional offset) between users' real and virtual hands is recovered when releasing the contact with virtual objects. The first method (sticky) constrains the user's virtual hand until the mismatch is recovered, while the second method (unsticky) employs an adaptive offset recovery method. In the first study, we explored the effect of positional offset and of motion alteration on users' behavioral adjustments and users' perception. In a second study, we evaluated variations in the sense of embodiment and the preference between the two control laws. Overall, both methods presented similar results in terms of performance and accuracy, yet, positional offsets strongly impacted motion profiles and users' performance. Both methods also resulted in comparable levels of embodiment. Finally, participants usually expressed strong preferences toward one of the two methods, but these choices were individual-specific and did not appear to be correlated solely with characteristics external to the individuals. Taken together, these results highlight the relevance of exploring the customization of motion control algorithms for avatars.

Design and Investigation of a low-cost elbow rehabilitation tool

Electronic medical development focuses on creating an efficient rehabilitation device that will strengthen all surrounding muscles and enhance elbow performance. The elbow rehabilitation tool (ERT) provides sophisticated methods like exercise and motion analysis. The initiative is notable for its advanced assessment methods and adaptable training curricula, which offer users a thorough and successful therapeutic experience. The ERT includes elements like a stepper motor, variable resistor, steel wire, microcontroller, motor driver, and components created using a 3D printer. The experiment results show that the average systematic error percentage is about 82.857%, where seven healthy people have tested the ERT aged between 22 and 55 (five males and two females). The ERT also has achievement evaluation, which improves motivation and dedication to the recovery methods through an effective rehabilitation experience for users.

Energy recovery in automotive systems: A review of regenerative braking, flywheel, thermoelectric, rankin cycle and electric turbo compound

In the backdrop of escalating global vehicle proliferation and the consequent surge in carbon dioxide (CO2) emissions, there is a compelling urgency to innovate energy recovery methods during vehicular operations for heightened energy efficiency and substantial environmental emission reductions. This paper discussed a variety of vehicle technologies to address environmental emissions issues and critically evaluates contemporary energy recovery technologies across three core dimensions: automotive thermal energy conversion, electronic turbine systems (ETC), and kinetic energy recovery systems. By analyzing empirical data encompassing CO2 emission reduction, energy recovery efficiency enhancement, fuel economy improvement, and applicability diversity across vehicle models, the study aims to establish a scientific foundation for continuous vehicular energy efficiency enhancement and emission reduction. This entails a comprehensive investigation of internal combustion engine principles for potential heat energy recovery, juxtaposing conventional and advanced cycles like the Rankine cycle. Moreover, it involves assessing ETC effectiveness in utilizing exhaust energy while acknowledging system complexity and dynamic response challenges. Additionally, the performance disparities of kinetic energy recovery systems like regenerative braking and exhaust energy recovery in distinct operational contexts are examined. By meticulously comparing experimental data, the paper intends to provide a comprehensive assessment of each technologys merits and drawbacks in advancing energy efficiency and emission reduction, try to pick one or more combinations to minimise the impact, thereby guiding future research and application in automotive energy recovery, and contributing to sustainable automotive engineering technology advancement.

한중 양국 중소기업해외채권 회수제도 비교 연구

According to the Korea Trade Insurance Corporation, the amount of funds that have not yet received payment for exports in 2021 is 82 million US dollars (106.6 billion Korean won), and the total amount of accounts receivable in the past five years has reached 1.3 trillion Korean won. According to the Korea Trade Association, although the issuance scale of foreign bonds is increasing, the cumulative recovery rate is as low as around 30%. The average recovery rate of overseas accounts receivable owed by Chinese export enterprises is only 20%. Combined with a 5% export bad debt rate, it basically means that 4% of the annual export amount cannot be recovered. For small and medium-sized enterprises with weak risk resistance, cash flow is crucial for their survival. In general, there are two common ways to obtain compensation for uncollected debts: by purchasing pre export credit insurance or by seeking an ECA agency for agency recovery. The public export credit agencies (ECA) K-SURE and SINOSURE of the two countries are exploring the differences and similarities in overseas bond recovery systems, while hoping to provide better bond recovery methods for small and medium-sized enterprises and help with overseas bond recovery.

Collection of serum albumin aggregate nanoparticles from human plasma by dielectrophoresis.

Dielectrophoresis (DEP) is a fast and reliable nanoparticle recovery method that utilizes nonuniform electric fields to manipulate particles based on their material composition and size, enabling recovery of biologically-derived nanoparticles from plasma for diagnostic applications. When applying DEP to undiluted human plasma, collection of endogenous albumin proteins was observed at electric field gradients much lower than predicted by theory to collect molecular proteins. To understand this collection, nanoparticle tracking analysis of bovine serum albumin (BSA) dissolved in 0.5× phosphate-buffered saline was performed and showed that albumin spontaneously formed aggregate nanoparticles with a mean diameter of 237nm. These aggregates experienceda dielectrophoretic force as a function of aggregate radius rather than the diameter of individual protein molecules which contributed to their collection. In high conductance buffer (6.8mS/cm), DEP was able to move these aggregates into regions of high electric field gradient, and in lower conductance buffer (0.68mS/cm), these aggregates could be moved into high or low gradient regions depending on the applied frequency. Disruption of BSA aggregates using a nonionic detergent significantly decreased the particle diameter, resulting in decreased dielectrophoretic collection of albumin which increased the collection consistency of particles of interest. These results provide techniques to manipulate albumin aggregates via DEP, which impacts collection of diagnostic biomarkers.

Pre-separation combined with reduction roasting for high-quality recovery of graphite and lithium from spent lithium ion batteries

The recycling of spent lithium ion batteries is of great significance because it contains large amounts of valuable metals. But current recovery methods exhibit limited efficiency in selectively extracting lithium from spent electrode materials and spent graphite becomes metallurgical residues. In this study, we propose a novel recycling flowchart that combines flotation with multi-stage water-leaching to enhance the recovery of graphite and lithium from black mass derived from spent lithium ion batteries. Removal of organics can be conducted by pyrolysis, at the same time, the spent ternary cathode material was decomposed into CoO, NiO, and MnO at a temperature of 600 °C for 60 min using pyrolysis product-derived reductant. The sub-microlevel migration behavior of lithium ions in electrode materials was also examined. The electrode material aggregates were broken up by water crushing, and 38.67 % lithium dissolves into water for recycling. Bubble flotation was used to recycle the excess graphite from the black mass while the residual graphite was used as reductant for the carbothermal reduction. Using the developed scheme, we were able to recover 95.51 % of lithium after carbothermal reduction with 12.31 % carbon residue. Based on basic research, a novel recycling flowchart of spent lithium-ion batteries has been proposed.

Tellurium Enrichment in Copper Tailings: A Mineralogical and Processing Study

As the global demand for tellurium (Te) increases, it is crucial to develop efficient recovery methods that consider existing supply streams. This research combines gravity separation and froth flotation processes to enhance the recovery of Te minerals from tailings produced during the beneficiation of copper porphyry ores. Prior to processing, a systematic and comprehensive characterization study of copper tailing (CT) samples was conducted to examine the deportment of Te minerals in different mineral phases and to understand their locking and liberation behavior. Characterization techniques included inductively coupled plasma mass spectrometry (ICP-MS) and TESCAN’s integrated mineral analysis (TIMA). Copper tailing characterization showed that minerals with gold (Au), silver (Ag), bismuth (Bi), and Te were present in various forms, including native Au, electrum, tellurides, and sulfosalts. TIMA revealed that >90% of these minerals were primarily hosted in pyrite as less than 10 µm inclusions in the CT. TIMA also revealed that Te minerals exhibited fine-grained liberation of less than 20 μm. Moreover, TIMA results showed that >80% of mica and other silicate minerals were concentrated in size fractions < 38 μm, suggesting that desliming processes would positively impact Te enrichment. The results from the processing tests showed a Te recovery rate of ~77% and a Te enrichment ratio of 13 when using the combination of gravity separation and froth flotation at 90 g/t xanthate collector and 50 g/t glycol frother. The findings from this study show a significant potential for Te recovery from unconventional sources if appropriate physical beneficiation approaches are adopted.

Cryogenic-membrane separation process for helium extraction and ethane co-production from natural gas

In order to address the defects of high energy consumption and low efficiency in the single cryogenic separation process for helium extraction, this paper integrate post-expansion nitrogen cycle refrigeration with membrane separation to establish a novel natural gas cryogenic-membrane helium recovery process. Based on four mainstream processes for ethane recovery from natural gas, an optimal ethane recovery method is selected and incorporated into the proposed cryogenic-membrane helium recovery process. The process is then simulated using ASPEN HYSYS software. The effects of operating parameters on critical equipment energy consumption, helium product concentration and ethane recovery were evaluated. The simulation results indicate that in the proposed helium recovery process, the concentration of refined helium reaches 99.6 %, and the ethane recovery rate is 90.13 %. Compared to the single helium extraction process, the total compressor energy consumption in our process is reduced by 23.10 %, and the integrated energy consumption is reduced by 20.4 %.

Response Characteristics of the Community Structure and Metabolic Genes of Oil-Recovery Bacteria after Targeted Activation of Petroleum Hydrocarbon-Degrading Bacteria in Low-Permeability Oil Reservoirs.

The microbial enhanced oil recovery (MEOR) process has been identified as a promising alternative to conventional enhanced oil recovery methods because it is eco-friendly and economically advantageous. However, the knowledge about the composition and diversity of microbial communities in artificially regulated reservoirs, especially after activating petroleum hydrocarbon-degrading bacteria (PHDB) by injecting exogenous nutrients, is still insufficient. This study utilized a combination of high-throughput sequencing and metagenomics technology to reveal the structural evolution characteristics of the indigenous microbial community in the reservoir during the PHDB activated for enhanced oil recovery, as well as the response relationship between the expression of its oil production functional genes and crude oil biodegradation. Results showed that Pseudomonas (>75%) gradually evolves into a stable dominant microbial community in the reservoir during the activation of PHDB. Besides, the gene expression and KEGG pathways after crude oil undergoes biodegradation by PHDB show that the number of genes related to petroleum hydrocarbon metabolism dominates the metabolism (21.98%). Meanwhile, a preliminary schematic diagram was drawn to illustrate the evolution mechanism of the EOR metabolic pathway after the targeted activation of PHDB. Additionally, it was found that the abundance of hydrocarbon-degrading enzymes increased significantly, and the activity of alcohol dehydrogenase was higher than that of aldehyde dehydrogenase and monooxygenase after PHDB activation. These research results not only filled in and expanded the theoretical knowledge of MEOR based on artificial interference or regulation of reservoir oil-recovery functional microbial community structure but also provided guidance for the future application of MEOR technology in oil field operations.

Efficient phosphorus recovery from waste activated sludge: Pretreatment with natural deep eutectic solvent and recovery as vivianite

Recycling phosphorus from waste activated sludge (WAS) is an effective method to address the nonrenewable nature of phosphorus and mitigate environmental pollution. To overcome the challenge of low phosphorus recovery from WAS due to insufficient disintegration, a method using a citric acid-based natural deep eutectic solvent (CA-NADES) assisted with low-temperature pretreatment was proposed to efficiently release and recover phosphorus. The results of 31P nuclear magnetic resonance (NMR) confirmed that low-temperature pretreatment promoted the conversion of organic phosphorus (OP) to inorganic phosphorus (IP) and enhanced the effect of CA-NADES. Changes in the three-dimensional excitation-emission matrix (3D-EEM) and flow cytometry (FCM) indicated that the method of CA-NADES with low-temperature thermal simultaneously release IP and OP by disintegrating sludge flocs, dissolving extracellular polymeric substances (EPS) structure, and cracking cells. When 5 % (v/v) of CA-NADES was added and thermally treated at 60 °C for 30 min, 43 % of total phosphorus (TP) was released from the sludge. The concentrations of proteins and polysaccharides reached 826 and 331 mg/L, respectively, which were 6.30 and 14.43 times higher than those of raw sludge. The dewatering and settling of the sludge were also improved. Metals were either enriched in the solid phase or released into the liquid phase in small quantities (most efficiencies of less than 10 %) for subsequent clean recovery. The released phosphorus was successfully recovered as vivianite with a rate of 90 %. This study develops an efficient, green, and sustainable method for phosphorus recovery from sludge using NADES and provides new insights into the high-value conversion of sludge.

Beyond denitrification: Alginate production by mucoid Pseudomonas aeruginosa using wastewater nitrate as electron acceptor

Microbial synthesis is an effective method for carbon and nitrogen recovery in the biological nitrogen removal process. The recycling of alginate-like exopolymers has attracted the attention of many researchers; however, the composition of the polymers and alginate differs. In this study, the capacity and mechanism of a mucoid Pseudomonas aeruginosa to remove nitrate and synthesize alginate were investigated. The results showed that the P. aeruginosa achieved higher nitrate removal efficiency (95.3 %) and alginate yield (298 mg/L) after 36 hours of microaerobic cultivation compare to aerobic condition. The optimal conditions for nitrogen removal and alginate recovery are 35 °C, pH 7 and C/N 15. The transcriptional activities of denitrifying genes in P. aeruginosa were upregulated at the low dissolved oxygen level. Although O2 may upregulate the expression of alginate synthesis key genes (algD, alg8 and alg44) by activating AlgZ-AlgR two-component signal transduction system, microaerobic condition facilitates P. aeruginosa proliferation and results in a higher alginate yield. Moreover, the P. aeruginosa strain was further coupled with an anoxic/aerobic reactor for deeper nitrogen removal, and the nitrate removal efficiency and alginate yield were maintained above 91 % and 100 mg/L, respectively. The conversion efficiency of sodium acetate to alginate reached 15 %. This work provides an economically and environmentally sustainable strategy for wastewater treatment and the recovery of high-value bioresource.