Antibiotic Susceptibility Testing Methods Research Articles

Prevalence of piperacillin/tazobactam resistance in invasive Haemophilus influenzae in Germany.

Haemophilus influenzae (Hi) is a Gram-negative bacterium that may cause sepsis or meningitis, treatment of which mainly includes β-lactam antibiotics. Since 2019 EUCAST breakpoints for piperacillin/tazobactam have been available. Little is known about the prevalence and mechanisms of piperacillin/tazobactam resistance in Hi. To provide reliable prevalence data for piperacillin/tazobactam resistance in Hi in Germany, to evaluate different antibiotic susceptibility testing methods and to examine possible resistance mechanisms. According to EUCAST breakpoints, the MIC for piperacillin/tazobactam resistance is >0.25 mg/L. All invasive Hi in Germany from 2019 were examined by gradient agar diffusion (GAD) for piperacillin/tazobactam susceptibility. Piperacillin/tazobactam broth microdilution (BMD), piperacillin GAD on tazobactam-containing agar [piperacillin GAD on Mueller-Hinton agar with horse blood (MH-F)/tazobactam) and piperacillin/tazobactam agar dilution (AD) were used for confirmation. Phenotypic testing was complemented by ftsI sequencing. Piperacillin/tazobactam GAD resulted in 2.9% (21/726) resistant Hi. BMD did not confirm piperacillin/tazobactam resistance. Two strains were found resistant by AD, of which one was also resistant using piperacillin GAD on MH-F/tazobactam. Overall, we found two strains with a piperacillin/tazobactam MIC >0.25 mg/L in at least two different tests (0.3%). Both were β-lactamase-producing amoxicillin/clavulanate-resistant with PBP3 mutations characterized as group III-like+. Relevant PBP3 mutations occurred in six strains without phenotypic piperacillin/tazobactam resistance. These mutations suggest a reduced efficacy of β-lactam antibiotics in these isolates. Piperacillin/tazobactam resistance prevalence in invasive Hi is low in Germany. Reduced susceptibility was correlated with PBP3 mutations, in particular with group III mutations.

Comparative Evaluation of Broth Microdilution With Disc Diffusion and VITEK 2 for Susceptibility Testing of Colistin on Multidrug-Resistant Gram-Negative Bacteria.

Background The rise of antibiotic resistance, particularly in Gram-negative bacteria, poses a significant global health threat. Colistin, a last-resort antibiotic, has witnessed renewed use. However, accurate susceptibility testing for colistin is challenging, with various methods available, leading to potential discrepancies. Ensuring reliable testing is crucial for effective patient treatment and antimicrobial stewardship. This study addresses the need to compare different colistin susceptibility testing methods, providing insights into their accuracy and relevance in clinical settings. Methods In this one-year prospective observational cross-sectional study conducted atIndira Gandhi Institute of Medical Sciences (IGIMS), Bihar, India, atertiary care hospital from July 2021 to June 2022, we aimed to evaluate the concordance between two widely used methods, VITEK 2 and Disc Diffusion, for antibiotic susceptibility testing in clinical multidrug-resistant Gram-negative bacterial isolates. These isolates, including species like Klebsiella pneumoniae, Acinetobacter baumannii, Klebsiella oxytoca, Pseudomonas aeruginosa, Citrobacter freundii, and Escherichia coli, were isolated from various clinical specimens. After rigorous species-level identification and quality control measures, antibiotic susceptibility testing was performed using both methods, and their agreement was assessed through Percentage Agreement analysis. Results In our study, we isolated and identified bacterial isolates from 105 patients, with a mean age of 47.30 years, demonstrating a wide age range. Pus samples were the most common type (25.7%), and K. pneumoniae was the most prevalent organism (45.7%). Antibiotic resistance patterns revealed significant challenges in treating infections caused by K. pneumoniae and A. baumannii, with resistance rates exceeding 70% for certain antibiotics. Among the 48 isolates of K. pneumoniae, the agreement was 93.8%, with 89.6% being sensitive and 6.3% being resistant by Disc Diffusion, while VITEK 2 indicated 0% resistance. E. coli isolates (n=21) had an agreement of 90.5%, with 90.5% sensitivity and 9.5% resistance by Disc Diffusion, and no resistance by VITEK 2. Conclusion The comparative analysis of antibiotic susceptibility testing methods reveals the superior performance of the VITEK 2 system, particularly in sensitivity and negative predictive value, emphasizing its potential as a reliable tool for guiding antibiotic therapy decisions.

Cost-Efficient Micro-Well Array-Based Colorimetric Antibiotic Susceptibility Testing (MacAST) for Bacteria from Culture or Community.

Rapid and cost-efficient antibiotic susceptibility testing (AST) is key to timely prescription-oriented diagnosis and precision treatment. However, current AST methods have limitations in throughput or cost effectiveness, and are impractical for microbial communities. Here, we developed a high-throughput micro-well array-based colorimetric AST (macAST) system equipped with a self-developed smartphone application that could efficiently test sixteen combinations of bacteria strains and antibiotics, achieving comparable AST results based on resazurin metabolism assay. For community samples, we integrated immunomagnetic separation into the macAST (imacAST) system to specifically enrich the target cells before testing, which shortened bacterial isolation time from days to only 45 min and achieved AST of the target bacteria with a low concentration (~103 CFU/mL). This proof-of-concept study developed a high-throughput AST system with an at least ten-fold reduction in cost compared with a system equipped with a microscope or Raman spectrum. Based on colorimetric readout, the antimicrobial susceptibility of the bacteria from microbial communities can be delivered within 6 h, compared to days being required based on standard procedures, bypassing the need for precise instrumentation in therapy to combat bacterial antibiotic resistance in resource-limited settings.

Fifty years devoted to anaerobes: historical, lessons, and highlights.

Renew interest and enthusiasm for anaerobes stem from both technological improvements (culture media, production of an adequate anaerobic atmosphere, identification methods) and greater awareness on the part of clinicians. Anaerobic infections were historically treated empirically, targeting the species known to be involved in each type of infection. Prevotella, fusobacteria, and Gram-positive cocci (GPAC) were considered responsible for infections above the diaphragm whereas for intra-abdominal infections, Bacteroides of the fragilis group (BFG), GPAC and clostridia were predominantly implicated. The antibiotic susceptibility of anaerobes was only taken into consideration by the clinician in the event of treatment failure or when faced with infections by multidrug-resistant bacteria (MDR). The evolution of antibiotic resistance together with clinical failures due to the absence of detection of hetero-resistant clones has resulted in a greater need for accessible antibiotic susceptibility testing (AST) and disc diffusion method. Improved isolation and identification of anaerobes, along with the availability of accessible and robust methods for performing AST, will ensure that treatment, whether empirical or guided by an antibiogram, will lead to better outcomes for anaerobic infections.

Microwell-enhanced optical rapid antibiotic susceptibility testing of single bacteria

Bacteria that are resistant to antibiotics present an increasing burden on healthcare. To address this emerging crisis, novel rapid antibiotic susceptibility testing (AST) methods are eagerly needed. Here, we present an optical AST technique that can determine the bacterial viability within 1h down to a resolution of single bacteria. The method is based on measuring intensity fluctuations of a reflected laser focused on a bacterium in reflective microwells. Using numerical simulations, we show that both refraction and absorption of light by the bacterium contribute to the observed signal. By administering antibiotics that kill the bacteria, we show that the variance of the detected fluctuations vanishes within 1 h, indicating the potential of this technique for rapid sensing of bacterial antibiotic susceptibility. We envisage the use of this method for massively parallelizable AST tests and fast detection of drug-resistant pathogens.

B-236 Portable 2 Hour Sample-to-Answer Multi-pathogen Phenotypic Antibiotic Susceptibility Test (AST)

Abstract Background Antimicrobial Resistance is a rapidly growing issue worldwide, arising from the overuse and misuse of antibiotics. The strongest tool the medical community has available to combat AMR is rapid, correct application of antibiotics to identified bacterial infections. Clinics and physician offices seek on-site rapid solutions to speed the pathway to timely and appropriate antibiotic therapies. GeneCapture is prototyping a rapid, sample-to-answer product to provide antibiotic susceptibility results directly from infected urine or wound samples. The test provides a susceptible vs non-susceptible call in under two hours and can be applied to samples with single or mixed pathogens. With support from the Defense Health Agency, a portable table-top instrument and disposable cartridge are being engineered to run this test at the point of care, allowing same-day prescriptions. The process is currently operational on the lab bench. Methods Fluorescent labeling of bacterial species, followed by optical counting, determines population growth with/without a suite of antibiotics. An on-board algorithm instantly converts raw cell numbers into a differential call of Susceptible or Non-susceptible for each bug/drug pair. A disposable cartridge with on-board antibiotics has been designed and is being finalized for fabrication. The optical counting is operating in a desktop device. Results Testing to date includes 124 strains from 7 of the most common Urinary Tract Infection and wound pathogens against a panel of six antibiotics. A total of 541 antibiotic/bacterial strain pairs in single or multiple pathogen antibiotic susceptibility testing (AST), are producing an initial 88.7% agreement to gold standard culture results. These results are all generated in two hours or less of assay time and represent a strong preliminary data set. Conclusion This 2-hour portable, novel, phenotypic AST profiling will produce informed and effective treatment options for medics, clinics and physician offices long before existing AST methods could return results.

Drug-Resistant Helicobacter pylori: Diagnosis and Evidence-Based Approach.

Helicobacter pylori (H. pylori) is the most common chronic bacterial infection, affecting approximately half of the world's population. H. pylori is a Class I carcinogen according to the World Health Organization, and the International Agency for Research on Cancer (IARC) has linked it to 90% of stomach cancer cases worldwide. The overall pattern points to a yearly reduction in eradication rates of H. pylori with the likelihood of success further decreasing after each unsuccessful therapeutic effort. Antimicrobial resistance in Helicobacter pylori is a major public health concern and is a predominant cause attributed to eradication failure. As a result, determining H. pylori's antibiotic susceptibility prior to the administration of eradication regimens becomes increasingly critical. Detecting H. pylori and its antimicrobial resistance has traditionally been accomplished by time-consuming culture and phenotypic drug susceptibility testing. The resistance of H. pylori to different antibiotics is caused by various molecular mechanisms, and advances in sequencing technology have greatly facilitated the testing of antibiotic susceptibility to H. pylori. This review will summarize H. pylori antibiotic resistance patterns, mechanisms, and clinical implications. We will also review the pros and cons of current antibiotic susceptibility testing methods. Along with a comparison of tailored susceptibility-guided regimens and empirical therapy based on the latest evidence, an evidence-based approach to such situations will be explored.

Susceptibility‐guided sequential strategy versus empirical therapy for Helicobacter pylori infection: study protocol for a randomised controlled trial

BackgroundNew treatment strategies are required against infections caused by Helicobacter pylori, which grows increasingly resistant to antibiotics. Polymerase chain reaction-based methods for antibiotic susceptibility testing are available for detecting H. pylori-specific mutations that confer resistance to clarithromycin and levofloxacin. Several meta-analyses have compared eradication rates for susceptibility-guided versus empirical therapy for H. pylori treatment; however, all have significant limitations and high heterogeneity, and the results are contradictory. The main objective of this trial is to assess whether a sequential strategy based on molecular susceptibility testing-guided therapy for H. pylori has a better eradication rate than empirical therapy.MethodsThis trial is designed as a prospective, randomised, open-label, active-controlled and single-centre study. Men and women who are H. pylori-positive, naïve to treatment, and aged 18–65 years will be recruited. A total of 500 participants will be randomised to receive either empirical therapy or a susceptibility-guided sequential strategy. Bismuth quadruple therapy will be the empirical first-line therapy, and in case of failure, high-dose dual (proton-pump inhibitor + amoxicillin) treatment will be the rescue therapy. For the susceptibility-guided sequential strategy, regimen selection will be based on H. pylori susceptibility to clarithromycin (first-line) and levofloxacin (rescue). A first-line treatment of clarithromycin triple therapy will be selected for clarithromycin-sensitive strains. For clarithromycin resistance, a high-dose dual therapy will be selected. During the rescue treatment, a levofloxacin quadruple regimen will be selected for levofloxacin-sensitive strains, and a furazolidone quadruple regimen will be selected for others. The primary outcome is the first-line eradication rate in both groups, and the overall (including first and rescue therapies) H. pylori eradication rate in both groups is one of the secondary outcomes. The eradication rates of H. pylori will be analysed by intention-to-treat analysis, modified intention-to-treat analysis, and per-protocol analysis.DiscussionThis randomised controlled trial will provide objective and valid evidence about the value of polymerase chain reaction-based molecular methods for antibiotic susceptibility testing in guiding H. pylori eradication.Trial registrationClinicaltrials.gov NCT05549115. Released on 18 September 2022. First posted on 22 September 2022. Enrolment of the first participant on 20 September 2022. The study is retrospectively registered.

Rapid Antibiotic Susceptibility Testing of Gram-Negative Bacteria Directly from Urine Samples of UTI Patients Using MALDI-TOF MS.

Urinary tract infections (UTIs) are one of the most common human infections and are most often caused by Gram-negative bacteria such as Escherichia coli. In view of the increasing number of antibiotic-resistant isolates, rapidly initiating effective antibiotic therapy is essential. Therefore, a faster antibiotic susceptibility test (AST) is desirable. The MALDI-TOF MS-based phenotypic antibiotic susceptibility test (MALDI AST) has been used in blood culture diagnostics to rapidly detect antibiotic susceptibility. This study demonstrates for the first time that MALDI AST can be used to rapidly determine antibiotic susceptibility in UTIs directly from patients' urine samples. MALDI-TOF MS enables the rapid identification and AST of Gram-negative UTIs within 4.5 h of receiving urine samples. Six urinary tract infection antibiotics, including ciprofloxacin, cotrimoxazole, fosfomycin, meropenem, cefuroxime, and nitrofurantoin, were analyzed and compared with conventional culture-based AST methods. A total of 105 urine samples from UTI patients contained bacterial isolates for MALDI AST. The combination of ID and AST by MALDI-TOF allowed us to interpret the result according to EUCAST guidelines. An overall agreement of 94.7% was found between MALDI AST and conventional AST for the urinary tract pathogens tested.

Handyfuge Microfluidic for On-Site Antibiotic Susceptibility Testing.

Low-cost, rapid, and accurate acquisition of minimum inhibitory concentrations (MICs) is key to limiting the development of antimicrobial resistance (AMR). Until now, conventional antibiotic susceptibility testing (AST) methods are typically time-consuming, high-cost, and labor-intensive, making them difficult to accomplish this task. Herein, an electricity-free, portable, and robust handyfuge microfluidic chip was developed for on-site AST, termed handyfuge-AST. With simply handheld centrifugation, the bacterial-antibiotic mixtures with accurate antibiotic concentration gradients could be generated in less than 5 min. The accurate MIC values of single antibiotics (including ampicillin, kanamycin, and chloramphenicol) or their combinations against Escherichia coli could be obtained within 5 h. To further meet the growing demands of point-of-care testing, we upgraded our handyfuge-AST with a pH-based colorimetric strategy, enabling naked eye recognition or intelligent recognition with a homemade mobile app. Through a comparative study of 60 clinical data (10 clinical samples corresponding to six commonly used antibiotics), the accurate MICs by handyfuge-AST with 100% categorical agreements were achieved compared to clinical standard methods (area under curves, AUCs = 1.00). The handyfuge-AST could be used as a low-cost, portable, and robust point-of-care device to rapidly obtain accurate MIC values, which significantly limit the progress of AMR.

Teicoplanin-Resistant Coagulase-Negative Staphylococci: Do the Current Susceptibility Testing Methods Reliably Detect This Elusive Phenotype?

Coagulase-negative staphylococci (CoNS), members of the skin commensal microbiota, are increasingly associated with local or systemic infections due to a shift in patient populations in recent decades. Subsequently, more CoNS strains have been subjected to antibiotic susceptibility testing (AST), thus leading to the increased detection of teicoplanin resistance. However, data concerning teicoplanin resistance among CoNS strains remain limited, heterogeneous, and inconclusive. We collected 162 consecutive CoNS strains identified using Vitek-2 as teicoplanin-resistant and tested them with a range of AST methods. The results of standard and high inoculum broth microdilution (sBMD; hBMD), agar dilution (AD) after 24 h and 48 h incubation, standard and macrogradient diffusion strip (sGDT, MET), screening agar, and disc diffusion were compared to assess their robustness and to establish a diagnostic algorithm to detect teicoplanin resistance. sBMD was used as the reference method, and the lowest number of strains were teicoplanin-resistant using this method. sGDT and disc diffusion generated similar results to sBMD. Compared with sBMD, AD-24 h generated the lowest number of false teicoplanin-resistant strains, followed by hBMD, AD-48 h, and Vitek-2. sGDT, a fast, easy, affordable method in diagnostic settings, generated the highest rate of false teicoplanin-susceptible strains. Vitek-2 testing produced the highest number of teicoplanin-resistant strains. Only in two strains was the initial Vitek-2 teicoplanin resistance confirmed using five other AST methods. In conclusion, the different antibiotic susceptibility testing methods generated inconsistent, inconclusive, and discrepant results, thus making it difficult to establish a diagnostic algorithm for suspected teicoplanin resistance. Teicoplanin testing proved to be challenging and easily influenced by technical factors. This study aimed not only to raise awareness of teicoplanin resistance testing but also of the need for future studies focusing on the clinical efficacy of teicoplanin in relation to its susceptibility results.

The Evaluation of Quality Control and Laboratory Management in Microbiology Laboratories in Sudan Comparing to the International Standards

Background: The microbiology laboratory plays an important role in isolation, characteristic of microorganisms, clinical function {infection control}, epidemiological, surveillance, prevention, finding the route of transmission of infective microbe, and participate in the antimicrobial stewardship programs (1). Hence the basic rights of laboratory test reports are the reliability, accuracy, timeliness, and in form that can be sense (2), so, the quality management system model is remarkable to attaining excellence in laboratories practices and improving quality (3). Objectives: The main objective of this study was to evaluate the quality control and laboratory management of microbiology laboratories in Sudan comparing to the international standards. Materials and Methods: The type of this study is non interventional study, observational research method, cross sectional study was carried out between 2014 to 2023 structured questionnaire distributed to the seven microbiology laboratories in Khartoum state and Aljazeera state in Sudan to evaluate the quality control and the laboratory management checking and assessing the facility setup, personnel, laboratory facilities, environment and biosafety, equipment, quality system, identification methods, Antibiotic susceptibility testing methods of these microbiology laboratories. SPSS statistical system and Microsoft excel were utilized for data analysis. Results: The results proposed in Tables and demonstrated that most of the questionnaires respondents about the procedures for the tests and methods done in the laboratory standardized in accordance with the ISO 15189:2012 their number was 81 with percentage (64.3%) there were 45with percentage (35.7%) was not complying the standards.Conclusion: The study revealed that all these microbiology laboratories have moderate performance quality control and laboratory management standards and their needs to continuous improvement programs to provide better patient care.

Analytical Performance and Potential Clinical Utility of EUCAST Rapid Antimicrobial Susceptibility Testing in Blood Cultures after Four Hours of Incubation.

EUCAST rapid antimicrobial susceptibility testing (RAST) provides antibiotic susceptibility results after 4 to 8 h of incubation. This study assessed the diagnostic performance and clinical usefulness of EUCAST RAST after 4 h. This was a retrospective clinical study performed on blood cultures with Escherichia coli and Klebsiella pneumoniae complex (K. pneumoniae and Klebsiella variicola) at Karolinska University Laboratory (Stockholm, Sweden). The rate of categorized RAST results and the categorical agreement (CA) of RAST with the standard EUCAST 16-to-20-h disk diffusion (DD) method for piperacillin-tazobactam, cefotaxime, ceftazidime, meropenem, and ciprofloxacin were analyzed, as well as the utility of RAST for adjusting the empirical antibiotic therapy (EAT) and the combination of RAST with a lateral flow assay (LFA) for extended-spectrum β-lactamase (ESBL) detection. A total of 530 E. coli and 112 K. pneumoniae complex strains were analyzed, generating 2,641 and 558 readable RAST zones, respectively. RAST results categorized according to antimicrobial sensitivity/resistance (S/R) were obtained for 83.1% (2,194/2,641) and 87.5% (488/558) of E. coli and K. pneumoniae complex strains, respectively. The RAST result categorization to S/R for piperacillin-tazobactam was poor (37.2% for E. coli and 66.1% for K. pneumoniae complex). CA with the standard DD method was over 97% for all tested antibiotics. Using RAST, we detected 15/26 and 1/10 of the E. coli and K. pneumoniae complex strains that were resistant to the EAT. For patients treated with cefotaxime, RAST was used to detect 13/14 cefotaxime-resistant E. coli strains and 1/1 cefotaxime-resistant K. pneumoniae complex strain. ESBL positivity was reported the same day as blood culture positivity with RAST and LFA. EUCAST RAST provides accurate and clinically relevant susceptibility results after 4 h of incubation and can accelerate the assessment of resistance patterns. IMPORTANCE Early effective antimicrobial treatment has been shown to be crucial for improving the outcome of bloodstream infections (BSI) and sepsis. In combination with the rise of antibiotic resistance, this calls for accelerated methods for antibiotic susceptibility testing (AST) for effective treatment of BSI. This study assesses EUCAST RAST, an AST method that yields results in 4, 6, or 8 h after blood culture positivity. We analyzed a high number of clinical samples of Escherichia coli and Klebsiella pneumoniae complex strains and confirm that the method delivers reliable results after 4 h of incubation for the relevant antibiotics for treating E. coli and K. pneumoniae complex bacteremia. Furthermore, we conclude that it is an important tool for antibiotic treatment decision-making and early detection of ESBL-producing isolates.

Clinical Distribution and Drug Resistance of Pseudomonas aeruginosa in Guangzhou, China from 2017 to 2021.

The aim of the current study was to analyse the distribution of antimicrobial drug resistance (AMR) among Pseudomonas aeruginosa (P. aeruginosa, PA) isolates from Guangdong Provincial People's Hospital (GDPH) from 2017 to 2021, and the impact of the COVID-19 outbreak on changes in the clinical distribution and drug resistance rate of P. aeruginosa to establish guidelines for empiric therapy. Electronic clinical data registry records from 2017 to 2021 were retrospectively analysed to study the AMR among P. aeruginosa strains from GDPH. The strains were identified by VITEK 2 Compact and MALDI-TOF MS, MIC method or Kirby-Bauer method for antibiotic susceptibility testing. The results were interpreted according to the CLSI 2020 standard, and the data were analysed using WHONET 5.6 and SPSS 23.0 software. A total of 3036 P. aeruginosa strains were detected in the hospital from 2017 to 2021, and they were primarily distributed in the ICU (n = 1207, 39.8%). The most frequent specimens were respiratory tract samples (59.6%). The detection rate for P. aeruginosa in 5 years was highest in September, and the population distribution was primarily male(68.2%). For the trend in the drug resistance rate, the 5-year drug resistance rate of imipenem (22.4%), aztreonam (21.5%) and meropenem (19.3%) remained at high levels. The resistance rate of cefepime decreased from 9.4% to 4.8%, showing a decreasing trend year by year (p < 0.001). The antibiotics with low resistance rates were aminoglycoside antibiotics, which were gentamicin (4.4%), tobramycin (4.3%), and amikacin (1.4%), but amikacin showed an increasing trend year by year (p = 0.008). Our analysis indicated that the detection rate of clinically resistant P. aeruginosa strains showed an upwards trend, and the number of multidrug-resistant (MDR) strains increased year by year, which will lead to stronger pathogenicity and mortality. However, after the outbreak of COVID-19 in 2020, the growth trend in the number of MDR bacteria slowed, presumably due to the strict epidemic prevention and control measures in China. This observation suggests that we should reasonably use antibiotics and treatment programs in the prevention and control of P. aeruginosa infection. Additionally, health prevention and control after the outbreak of the COVID-19 epidemic (such as wearing masks, washing hands with disinfectant, etc., which reduced the prevalence of drug resistance) led to a slowdown in the growth of the drug resistance rate of P. aeruginosa in hospitals, effectively reducing the occurrence and development of drug resistance, and saving patient's treatment costs and time.

P20 Novel phenotypic, impedance-based fast antibiotic susceptibility test (AST) can distinguish between MRSA and MSSA in 2 h

Abstract Background Antimicrobial resistance (AMR) is a global problem and is forecast that by 2050 it will cause 10 million deaths a year. Current antimicrobial susceptibility tests (ASTs) used clinically, can take 24–48 h or longer to report results, requiring that initial treatment uses broad spectrum antibiotics. The novel impedance-based fast AST (iFAST) method can report results within 2 h of exposure to an antibiotic. The impedance cytometer measures changes in the electrical charge flow between electrodes when bacterial cells flow individually through a microfluidic channel by an AC current of multiple frequencies. This is interpreted as a read-out of electrical radius (a surrogate measure of cell volume) and opacity (a measure of the resistance properties of the bacterial membranes). Exposure to antibiotics can change the electrical characteristics of the bacterial cell in size and opacity compared with the control sample. The number of exposed cells within a contour defined by a control sample, is used to assess how the cells following exposure. Objectives To demonstrate concordance of this novel rapid method with the current gold standard AST, as performed in a diagnostic laboratory. To distinguish between MRSA and MSSA isolates. Cefoxitin was used as a surrogate for methicillin in laboratory testing as outlined in EUCAST guidelines. Sequentially collected bacterial isolates were used in the clinical microbiology laboratory of University Hospital Southampton from May–July 2022. Methods 60 blinded concurrent clinical isolates of S. aureus were taken from the clinical workflow and tested on the iFAST. S. aureus isolates were streaked onto blood plates and incubated at 37°C for 2 h. The bacteria were diluted into 3 mL of saline solution. The concentration of the bacteria was adjusted to 5 × 105 cfu/mL, in line with EUCAST guidelines, exposed to the beta lactam antibiotic cefoxitin for 2 h at the EUCAST breakpoint concentration of 8 mg/L. Following exposure, the samples were diluted 1:20 in saline solution and measured on the iFAST. Cefoxitin-exposed cells were compared with a control sample, which has not been challenged with antibiotic. The iFAST results were compared with gold standard disk diffusion assay results, generated in the clinical lab as part of normal clinical service. Results The iFAST results showed 100% concordance with disk diffusion susceptibility testing for cefoxitin carried out in parallel by the clinical laboratory. The data showed different electrical impedance changes for both resistant and susceptible isolates. Susceptible strains showed a decrease in electrical radius, suggesting that the cells are smaller and a significant reduction in overall cell count was observed. Resistant strains showed a distinctive increase in electrical radius, suggesting that the cells are larger in size when exposed to cefoxitin. However, this and other factors that may contribute to an increase in electrical radius are currently being investigated. An electrical MIC carried out for selected strains, was used to confirm that the transition from one response to the other corresponded to the MIC measured by microbroth dilution. An analysis of the data with hospital laboratory staff, suggested that the iFAST can provide an MRSA confirmation to clinicians 16 h before the current AST's, which could benefit patient management and treatment. Conclusions The iFAST can rapidly differentiate between MRSA and MSSA isolates in concordance with current susceptibility testing in the clinical setting. The results help to show how the iFAST could reduce the time taken to provide critical and accurate antibiotic treatment to patients.

A rapid screening platform for antibiotic susceptibility testing based on a simple colorimetric method.

Rapid screening platforms for antibiotic susceptibility testing (AST) are important in inhibiting bacterial resistance in clinical practice. Herein, a rapid screening platform is reported for AST, which is based on nanofiber membrane enrichment bacteria-assisted cell counting Kit-8 (CCK8) colorimetry. The absorbance of CCK8 formazan has a linear relationship with the number of bacteria. The interference of antibiotics in the absorbance of CCK8 formazan could be eliminated by separating planktonic bacteria from the culture medium using nanofiber membranes. The total detection time is 7-9 h, using the new screening platform, which is significantly shorter than that with the traditional method, and the limit of detection of this method is 10 CFU mL-1. The evaluation results of antibiotic susceptibility are identical when using the new screening method and traditional methods. This method meets the definition of "rapid testing" for antibiotic susceptibility by most microbiologists. Furthermore, the new screening platform for antibiotic susceptibility testing ability in vitro was proved using E. coli in urine and blood, and S. aureus in wound fluid as practical samples. All the results showed that the new screening platform is a promising method for rapid antibiotic susceptibility testing in vitro.

Precise digital bacteria enumeration and antibiotic susceptibility testing via a portable vibrating capillary-based droplet platform

Antibiotic resistance can lead to multidrug-resistant superbugs and threaten global health, putting forward a high demand for accurate and fast antibiotic susceptibility testing (AST). Conventional AST methods are labor-intensive and time-consuming, far from meeting the requirement for rapid clinical decision-making. Here, we develop a portable vibrating capillary-based droplet platform for precise digital bacteria enumeration and rapid AST. Multi-volume droplets encapsulating bacteria with or without antibiotics are generated on demand, and the elevated fluorescence from resazurin reduction is measured, which corresponds to the growing bacteria. Automated data analysis is achieved by a self-developed image processing program. Multi-volume droplet digital counting allows precise bacteria enumeration over a wide dynamic range spanning more than 4 orders of magnitude. Droplet digital AST of ampicillin against E. coli demonstrates that it is feasible for accurately assessing the minimum inhibitory concentration and investigating the inoculum effect, with the assay time reduced to 5 h. In sum, this method is easy to operate, cost-effective, with high accuracy and short time-to-result, which is highly promising for rapid and precise assessment of antimicrobial susceptibility in resource-limited settings.

Antibiotic Susceptibility Testing with Raman Biosensing.

Antibiotics guard us against bacterial infections and are among the most commonly used medicines. The immediate consequence of their large-scale production and prescription is the development of antibiotic resistance. Therefore, rapid detection of antibiotic susceptibility is required for efficient antimicrobial therapy. One of the promising methods for rapid antibiotic susceptibility testing is Raman spectroscopy. Raman spectroscopy combines fast and contactless acquisition of spectra with good selectivity towards bacterial cells. The antibiotic-induced changes in bacterial cell physiology are detected as distinct features in Raman spectra and can be associated with antibiotic susceptibility. Therefore, the Raman-based approach may be beneficial in designing therapy against multidrug-resistant infections. The surface-enhanced Raman spectroscopy (SERS) and resonance Raman spectroscopy (RRS) additionally provide excellent sensitivity. In this review, we present an analysis of the Raman spectroscopy-based optical biosensing approaches aimed at antibiotic susceptibility testing.

Rapid Bacterial Motility Monitoring Using Inexpensive 3D-Printed OpenFlexure Microscopy Allows Microfluidic Antibiotic Susceptibility Testing.

Antibiotic susceptibility testing is vital to tackle the emergence and spread of antimicrobial resistance. Inexpensive digital CMOS cameras can be converted into portable digital microscopes using 3D printed x-y-z stages. Microscopic examination of bacterial motility can rapidly detect the response of microbes to antibiotics to determine susceptibility. Here, we present a new simple microdevice-miniature microscope cell measurement system for multiplexed antibiotic susceptibility testing. The microdevice is made using melt-extruded plastic film strips containing ten parallel 0.2 mm diameter microcapillaries. Two different antibiotics, ceftazidime and gentamicin, were prepared in Mueller-Hinton agar (0.4%) to produce an antibiotic-loaded microdevice for simple sample addition. This combination was selected to closely match current standard methods for both antibiotic susceptibility testing and motility testing. Use of low agar concentration permits observation of motile bacteria responding to antibiotic exposure as they enter capillaries. This device fits onto the OpenFlexure 3D-printed digital microscope using a Raspberry Pi computer and v2 camera, avoiding need for expensive laboratory microscopes. This inexpensive and portable digital microscope platform had sufficient magnification to detect motile bacteria, yet wide enough field of view to monitor bacteria behavior as they entered antibiotic-loaded microcapillaries. The image quality was sufficient to detect how bacterial motility was inhibited by different concentrations of antibiotic. We conclude that a 3D-printed Raspberry Pi-based microscope combined with disposable microfluidic test strips permit rapid, easy-to-use bacterial motility detection, with potential for aiding detection of antibiotic resistance.

Investigating nanomotion-based technology (Resistell AST) for rapid antibiotic susceptibility testing among adult patients admitted to a tertiary-care hospital with Gram-negative bacteraemia: protocol for a prospective, observational, cross-sectional, single-arm study

IntroductionEffective treatment of bloodstream infections (BSIs) is relying on rapid identification of the causing pathogen and its antibiotic susceptibility. Still, most commercially available antibiotic susceptibility testing (AST) methods are based...