Metal-organic Frameworks Topology Research Articles

An yttrium-organic framework for effective iodine capture and sensing of Cr6+ ions

For environmental protection, it is essential to effectively capture radioiodine that is produced or released as a result of nuclear fission. In this situation, metal–organic frameworks (MOFs) may be effective materials to help with the challenging environmental problem. The solvothermal reaction of Yttrium metal ions (Y3+) with trimesic acid (H3BTC, benzene-1,3,5-tricarboxylic acid) in H2O and ethanol in a 1:1 ratio builds a novel MOF, C9H5O7Y or [(BTC)Y]n (YS-1). According to single crystal XRD, YS-1 has a 3D framework with rare rnb topology of MOF with SBUs: C6H3, C, H2OY. The as-prepared MOF was carefully characterized, and UV–Vis spectroscopy was used to investigate its iodine adsorption in the vapor and solution phases. This revealed that the MOF had a very high adsorption capacity. YS-1 has a maximum sorption capacity of around 142 mg/g and 114.56 mg/g in the vapor and solution phases, respectively. Iodine binds to MOF in the forms of I2 and I3− species, according to Raman spectra. It is interesting to note that the YS-1 has the highest fluorescence potential and is the most sensitive to Cr6+ ions in a liquid medium. As a result, the current MOF functions as a promising material for greater iodine uptake as well as Cr6+ ions sensing.

Exploring the Methane to Methanol Oxidation over Iron and Copper Sites in Metal–Organic Frameworks

The direct oxidation of methane to methanol (MTM) is a significant challenge in catalysis and holds profound economic implications for the modern chemical industry. Bioinspired metal–organic frameworks (MOFs) with active iron and copper sites have emerged as innovative catalytic platforms capable of facilitating MTM conversion under mild conditions. This review discusses the current state of the art in applying MOFs with iron and copper catalytic centers to effectuate the MTM reaction, with a focus on the diverse spectroscopic techniques employed to uncover the electronic and structural properties of MOF catalysts at a microscopic level. We explore the synthetic strategies employed to incorporate iron and copper sites into various MOF topologies and explore the efficiency and selectivity of the MOFs embedded with iron and copper in acting as catalysts, as well as the ensuing MTM reaction mechanisms based on spectroscopic characterizations supported by theory. In particular, we show how integrating complementary spectroscopic tools that probe varying regions of the electromagnetic spectrum can be exceptionally conducive to achieving a comprehensive understanding of the crucial reaction pathways and intermediates. Finally, we provide a critical perspective on future directions to advance the use of MOFs to accomplish the MTM reaction.

Laser-Assisted Design of MOF-Derivative Platforms from Nano- to Centimeter Scales for Photonic and Catalytic Applications.

Laser conversion of metal-organic frameworks (MOFs) has recently emerged as a fast and low-energy consumptive approach to create scalable MOF derivatives for catalysis, energy, and optics. However, due to the virtually unlimited MOF structures and tunable laser parameters, the results of their interaction are unpredictable and poorly controlled. Here, we experimentally base a general approach to create nano- to centimeter-scale MOF derivatives with the desired nonlinear optical and catalytic properties. Five three- and two-dimensional MOFs, differing in chemical composition, topology, and thermal resistance, have been selected as precursors. Tuning the laser parameters (i.e., pulse duration from fs to ns and repetition rate from kHz to MHz), we switch between ultrafast nonthermal destruction and thermal decomposition of MOFs. We have established that regardless of the chemical composition and MOF topology, the tuning of the laser parameters allows obtaining a series of structurally different derivatives, and the transition from femtosecond to nanosecond laser regimes ensures the scaling of the derivatives from nano- to centimeter scales. Herein, the thermal resistance of MOFs affects the structure and chemical composition of the resulting derivatives. Finally, we outline the "laser parameters versus MOF structure" space, in which one can create the desired and scalable platforms with nonlinear optical properties from photoluminescence to light control and enhanced catalytic activity.

Net-clipping as a top-down approach for the prediction of topologies of MOFs built from reduced-symmetry linkers.

Reticular materials constructed from regular molecular building blocks (MBBs) have been widely explored in the past three decades. Recently, there has been increasing interest in the assembly of novel, intricate materials using less-symmetric ligands; however, current methods for predicting structure are not amenable to this increased complexity. To address this gap, we propose herein a generalised version of the net-clipping approach for anticipating the topology of metal-organic frameworks (MOFs) assembled from organic linkers and different polygonal and polyhedral MBBs. It relies on the generation of less-symmetric nets with less-connected linkers, via the rational deconstruction of more-symmetric and more-connected linkers in edge-transitive nets. We applied our top-down strategy to edge-transitive nets containing 4-c tetrahedral, 6-c hexagonal, 8-c cubic or 12-c hexagonal prism linkers, envisaging the formation of 102 derived and 46 clipped nets. Among these, we report 33 new derived nets (icn7-icn39) and 6 new clipped nets (icn1-icn6). Importantly, the feasibility of using net-clipping to anticipate clipped nets is supported by literature examples and new experimental additions. Finally, we suggest and illustrate that net-clipping can be extended to less-regular, non-edge transitive nets as well as to covalent-organic frameworks (COFs), thus opening new avenues for the rational design of new reticular materials exhibiting unprecedented topologies.

Leveraging Isothermal Titration Calorimetry to Explore Structure–Property Relationships of Protein Immobilization in Metal–Organic Frameworks

AbstractProteins immobilized in metal–organic frameworks (MOFs) often show extraordinary stability. However, most efforts to immobilize proteins in MOFs have only been exploratory. Herein, we present the first systematic study on the thermodynamics of protein immobilization in MOFs. Using insulin as a probe, we leveraged isothermal titration calorimetry (ITC) to investigate how topology, pore size, and hydrophobicity of MOFs influence immobilization. ITC data obtained from the encapsulation of insulin in a series of Zr‐MOFs reveals that MOFs provide proteins with a hydrophobic stabilizing microenvironment, making the encapsulation entropically driven. In particular, the pyrene‐based NU‐1000 tightly encapsulates insulin in its ideally sized mesopores and stabilizes insulin through π‐π stacking interactions, resulting in the most enthalpically favored encapsulation process among this series. This study reveals critical insights into the structure–property relationships of protein immobilization.

Leveraging Isothermal Titration Calorimetry to Explore Structure-Property Relationships of Protein Immobilization in Metal-Organic Frameworks.

Proteins immobilized in metal-organic frameworks (MOFs) often show extraordinary stability. However, most efforts to immobilize proteins in MOFs have only been exploratory. Herein, we present the first systematic study on the thermodynamics of protein immobilization in MOFs. Using insulin as a probe, we leveraged isothermal titration calorimetry (ITC) to investigate how topology, pore size, and hydrophobicity of MOFs influence immobilization. ITC data obtained from the encapsulation of insulin in a series of Zr-MOFs reveals that MOFs provide proteins with a hydrophobic stabilizing microenvironment, making the encapsulation entropically driven. In particular, the pyrene-based NU-1000 tightly encapsulates insulin in its ideally sized mesopores and stabilizes insulin through π-π stacking interactions, resulting in the most enthalpically favored encapsulation process among this series. This study reveals critical insights into the structure-property relationships of protein immobilization.

Rapid Generation of Metal-Organic Framework Phase Diagrams by High-Throughput Transmission Electron Microscopy.

Metal-organic frameworks (MOFs) constructed from Zr6 nodes and tetratopic carboxylate linkers display high structural diversity and complexity in which various crystal topologies can result from identical building units. To determine correlations between MOF topologies and experimental parameters, such as solvent choice or modulator identity and concentration, we demonstrate the rapid generation of phase diagrams for Zr6-MOFs with 1,4-dibromo-2,3,5,6-tetrakis(4-carboxyphenyl)benzene linkers under a variety of conditions. We have developed a full set of methods for high-throughput transmission electron microscopy (TEM), including automated sample preparation and data acquisition, to accelerate MOF characterization. The use of acetic acid as a modulator yields amorphous, NU-906, NU-600, and mixed-phase structures depending on the ratio of N,N-dimethylformamide to N,N-diethylformamide solvent and the quantity of the modulator. Notably, the use of formic acid as a modulator enables direct control of crystal growth along the c direction through variation of the modulator quantity, thus realizing aspect ratio control of NU-1008 crystals with different catalytic hydrolysis performance toward a nerve agent simulant.

Topology- and wavelength-governed CO2 reduction photocatalysis in molecular catalyst-metal-organic framework assemblies.

Optimising catalyst materials for visible light-driven fuel production requires understanding complex and intertwined processes including light absorption and catalyst stability, as well as mass, charge, and energy transport. These phenomena can be uniquely combined (and ideally controlled) in porous host-guest systems. Towards this goal we designed model systems consisting of molecular complexes as catalysts and porphyrin metal-organic frameworks (MOFs) as light-harvesting and hosting porous matrices. Two MOF-rhenium molecule hybrids with identical building units but differing topologies (PCN-222 and PCN-224) were prepared including photosensitiser-catalyst dyad-like systems integrated via self-assembled molecular recognition. This allowed us to investigate the impact of MOF topology on solar fuel production, with PCN-222 assemblies yielding a 9-fold turnover number enhancement for solar CO2-to-CO reduction over PCN-224 hybrids as well as a 10-fold increase compared to the homogeneous catalyst-porphyrin dyad. Catalytic, spectroscopic and computational investigations identified larger pores and efficient exciton hopping as performance boosters, and further unveiled a MOF-specific, wavelength-dependent catalytic behaviour. Accordingly, CO2 reduction product selectivity is governed by selective activation of two independent, circumscribed or delocalised, energy/electron transfer channels from the porphyrin excited state to either formate-producing MOF nodes or the CO-producing molecular catalysts.

Quantum Buckling in Metal-Organic Framework Materials.

Metal–organic frameworks are porous materials composed of metal ions or clusters coordinated by organic molecules. As a response to applied uniaxial pressure, molecules with a straight shape in the framework start to buckle. At sufficiently low temperatures, this buckling has a quantum nature described by a superposition of degenerate buckling states. Buckling states of adjacent molecules couple in a transverse field Ising type behavior. Based on the example of the metal organic framework topology MOF-5, we derived the phase diagram under applied strain, showing a normal phase, a parabuckling phase, and a ferrobuckling phase. At zero temperature, quantum phase transitions between the three phases can be induced by strain. This novel type of order opens a new path toward strain induced quantum phases.

Isomeric sp2-C-conjugated porous organic polymer-mediated photo- and sono-catalytic detoxification of sulfur mustard simulant under ambient conditions

Isomeric sp2-C-conjugated porous organic polymer-mediated photo- and sono-catalytic detoxification of sulfur mustard simulant under ambient conditions

Unusual Metal-Organic Framework Topology and Radiation Resistance through Neptunyl Coordination Chemistry.

A Np(V) neptunyl metal-organic framework (MOF) with rod-shaped secondary building units was synthesized, characterized, and irradiated with γ rays. Single-crystal X-ray diffraction data revealed an anionic framework containing infinite helical chains of actinyl-actinyl interaction (AAI)-connected neptunyl ions linked together through tetratopic tetrahedral organic ligands (NSM). NSM exhibits an unprecedented net, demonstrating that AAIs may be exploited to give new MOFs and new topologies. To probe its radiation stability, we undertook the first irradiation study of a transuranic MOF and its organic linker building block using high doses of γ rays. Diffraction and spectroscopic data demonstrated that the radiation resistance of NSM is greater than that of its linker building block alone. Approximately 6 MGy of irradiation begins to induce notable changes in the long- and short-range order of the framework, whereas 3 MGy of irradiation induces total X-ray amorphization and changes in the local vibrational bands of the linker building block.

Metal-Organic Frameworks-Based Nanomaterials for Drug Delivery.

The composition and topology of metal-organic frameworks (MOFs) are exceptionally tailorable; moreover, they are extremely porous and represent an excellent Brunauer–Emmett–Teller (BET) surface area (≈3000–6000 m2·g−1). Nanoscale MOFs (NMOFs), as cargo nanocarriers, have increasingly attracted the attention of scientists and biotechnologists during the past decade, in parallel with the evolution in the use of porous nanomaterials in biomedicine. Compared to other nanoparticle-based delivery systems, such as porous nanosilica, nanomicelles, and dendrimer-encapsulated nanoparticles, NMOFs are more flexible, have a higher biodegradability potential, and can be more easily functionalized to meet the required level of host–guest interactions, while preserving a larger and fully adjustable pore window in most cases. Due to these unique properties, NMOFs have the potential to carry anticancer cargos. In contrast to almost all porous materials, MOFs can be synthesized in diverse morphologies, including spherical, ellipsoidal, cubic, hexagonal, and octahedral, which facilitates the acceptance of various drugs and genes.

Effect of Topology on Photodynamic Sterilization of Porphyrinic Metal‐Organic Frameworks

Porphyrinic metal-organic frameworks (MOFs) are promising photosensitizers due to the lack of self-aggregation of porphyrin in aqueous solution. However, how the topology of porphyrinic MOFs affects the generation of singlet oxygen (1 O2 ) is unclear. Here, the effect of the topology of porphyrinic MOFs on their photodynamic performance is reported. Four porphyrinic zirconium MOFs (MOF-525, MOF-545, PCN-223 and PCN-224 with different topologies: ftw, csq, shp and she, respectively) were selected to study the influence of topology on the photodynamic antibacterial performance. The 1 O2 generation and the photodynamic antibacterial performance followed an decreasing order of MOF-545>MOF-525>PCN-224>PCN-223. The results reveal that the pore size, the distance between porphyrin, and the number of porphyrin per Zr6 O8 cluster in MOFs greatly affected 1 O2 generation. This work provides guidance for designing new MOFs for efficient photodynamic sterilization.

From n- to p-Type Material: Effect of Metal Ion on Charge Transport in Metal-Organic Materials.

An intriguing new class of two-dimensional (2D) materials based on metal-organic frameworks (MOFs) has recently been developed that displays electrical conductivity, a rarity among these nanoporous materials. The emergence of conducting MOFs raises questions about their fundamental electronic properties, but few studies exist in this regard. Here, we present an integrated theory and experimental investigation to probe the effects of metal substitution on the charge transport properties of M-HITP, where M = Ni or Pt and HITP = 2,3,6,7,10,11-hexaiminotriphenylene. The results show that the identity of the M-HITP majority charge carrier can be changed without intentional introduction of electronically active dopants. We observe that the selection of the metal ion substantially affects charge transport. Using the known structure, Ni-HITP, we synthesized a new amorphous material, a-Pt-HITP, which although amorphous is nevertheless found to be porous upon desolvation. Importantly, this new material exhibits p-type charge transport behavior, unlike Ni-HITP, which displays n-type charge transport. These results demonstrate that both p- and n-type materials can be achieved within the same MOF topology through appropriate choice of the metal ion.

Lamellar Enzyme-Metal–Organic Framework Composites Enable Catalysis on Large Substrates

Lamellar Enzyme-Metal–Organic Framework Composites Enable Catalysis on Large Substrates

Topology-Dependent Alkane Diffusion in Zirconium Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) can be designed for chemical applications by modulating the size and shape of intracrystalline pores through selection of their nodes and linkers. Zirconium nodes with variable connectivity to organic linkers allow for a broad range of topological nets that have diverse pore structures even for a consistent set of linkers. Identifying an optimal pore structure for a given application, however, is complicated by the large material space of possible MOFs. In this work, molecular dynamics simulations were used to determine how a MOF's topology affects the diffusion of propane and isobutane over the full range of loadings and to understand how MOFs can be tuned to reduce transport limitations for applications in separations and catalysis. High-throughput simulation techniques were employed to efficiently calculate loading-dependent diffusivities in 38 MOFs. The results show that topologies with higher node connectivity have reduced alkane diffusivities compared to topologies with lower node connectivity. Molecular siting techniques were used to elucidate how the pore structures in different topologies affect adsorbate diffusivities.

Improving Energy Transfer within Metal-Organic Frameworks by Aligning Linker Transition Dipoles along the Framework Axis.

Crystalline metal-organic frameworks (MOFs) can assemble chromophoric molecules into a wide range of spatial arrangements, which are controlled by the MOF topology. Like natural light-harvesting complexes (LHCs), the precise arrangement modulates interchromophoric interactions, in turn determining excitonic behavior and migration dynamics. To unveil the key factors that control efficient exciton displacements within MOFs, we first developed linkers with low electronic symmetry (as defined by large transition dipoles) and then assembled them into MOFs. These linkers possess extended conjugation along one molecular axis, engendering low optical bandgaps and improved oscillator strength for their lowest-energy transition (S0 → S1). This enhances absorption-emission spectral overlap and boosts the efficiency of Förster resonance energy transfer, which was observed experimentally by a sizable decrease in emission quantum yield (QY), accompanied by a faster population decay profile. We find that MOFs that orient these elongated linkers along their asymmetric pore channel, e.g., the hexagonal pores in an xly network, manifested >50% decrease in their emission QY with faster decay profiles relative to their corresponding solution dissolved linkers. This is due to an efficient migration of photogenerated excitons at the crystallite peripheral sites to internal sites, which was facilitated by polarized absorption-emission overlap among the parallelly aligned linkers. In contrast, symmetric MOFs, such as those with sqc-a topological net, orient elongated linkers along two perpendicular crystal axes, which hinders efficient exciton migration. The present study underscores that MOFs are promising to develop artificial LHCs, but that to achieve an efficient exciton displacement, appropriate topology-guided assembly is required to fully realize the true potential of linkers with low electronic symmetry.

Uncovering the Role of Metal–Organic Framework Topology on the Capture and Reactivity of Chemical Warfare Agents

Chemical warfare agents (CWAs), such as sarin and sulfur mustard, continue to be a threat due to their high toxicity coupled with worldwide usage. Metal–organic frameworks (MOFs) are efficient mate...

Net-Clipping: An Approach to Deduce the Topology of Metal-Organic Frameworks Built with Zigzag Ligands.

Herein we propose a new approach for deducing the topology of metal-organic frameworks (MOFs) assembled from organic ligands of low symmetry, which we call net-clipping. It is based on the construction of nets by rational deconstruction of edge-transitive nets comprising higher-connected molecular building blocks (MBBs). We have applied net-clipping to predict the topologies of MOFs containing zigzag ligands. To this end, we derived 2-connected (2-c) zigzag ligands from 4-c square-like MBBs by first splitting the 4-c nodes into two 3-c nodes and then clipping their two diagonally connecting groups. We demonstrate that, when this approach is applied to the 17 edge-transitive nets containing square-like 4-c MBBs, net-clipping leads to generation of 10 nets with different underlying topologies. Moreover, we report that literature and experimental research corroborate successful implementation of our approach. As proof-of-concept, we employed net-clipping to form three new MOFs built with zigzag ligands, each of which exhibits the deduced topology.

Alkaline earth-organic frameworks with amino derivatives of 2,6-naphthalene dicarboxylates: structural studies and fluorescence properties.

Alkaline earth metal ion organic frameworks (AEMOFs) represent a relatively underexplored subcategory of metal-organic frameworks (MOFs). In this contribution, we present the synthesis and structural study of the new MOFs 1-8 based on the alkaline earth ions Mg2+, Ca2+, Sr2+ and Ba2+ and the amino substituted bridging ligands 4-aminonaphthalene-2,6-dicarboxylate (ANDC2-) and 4,8-diaminonaphthalene-2,6-dicarboxylate (DANDC2-). Compounds 1, 5, 6, 7 and 8 constitute rare examples of three-dimensional MOFs which feature square planar M4 secondary building units (SBUs) surrounded by eight bridging ditopic ligands. The underlying topology of MOFs 1, 5, 7 and 8 conforms to the 4-c pcb net which can be simplified to the 8-c bcu net, while 6 adopts the 4-c lta net which simplifies to the 8-c reo net. To the best of our knowledge these are the first examples of MOFs of their structural types formed by linear dicarboxylates instead of trigonal tricarboxylates or tetrahedral tetracarboxylates. Compounds 2, 3 and 4 also feature three dimensional networks with linear rod-shaped SBUs with the Ba2+ MOF 3 displaying an sra rod-net and MOFs 2 and 4 showing very complex rod-nets with so far unique topologies. Fluorescence studies revealed that the free ligands exhibit strong blue-green emission displaying considerable positive solvatochromism thereby pointing towards charge transfer excited states involving the shift of electron density from the amino groups to the aromatic core. Correspondingly, the MOFs display ligand based fluorescence with small differences in emission maxima possibly attributable to the difference in the charge density of the metal ions combined with the different environments around ligands in the crystal structures.