Metal Complexes Research Articles

Ir(III) Diamine Transfer Hydrogenation Catalysts in Cancer Cells

AbstractThe development of catalytic metallodrugs is an emerging field that may offer new approaches to cancer chemotherapeutic design. By exploiting the unique properties of transition metal complexes, in‐cell catalysis can be applied to modulate the cellular redox balance as part of a multi‐targeting mechanism of action. We describe the synthesis and characterization of six coordinatively unsaturated iridium(III) diamine catalysts that are stable at physiological pH in aqueous solution. Reduction of the colorimetric substrate 2,6‐dichlorophenolindophenol by transfer hydrogenation under biologically compatible conditions achieved turnover frequencies up to 63 ± 2 h−1 and demonstrated that the source of hydride (sodium formate) is the limiting reagent, despite being in a 1000‐fold excess of the catalyst. The catalyst showed low in vivo acute toxicity in zebrafish embryos and modest in vitro potency towards cancer cells. When administered alone, the catalyst generated oxidative stress in cells (an effect that was conserved in vivo), but co‐treatment with a nontoxic dose of sodium formate negated this effect. Co‐treatment with sodium formate significantly enhanced catalyst potency in cancer cells (A2780 ovarian and MCF7 breast cancer cells) and drug‐resistant cells (A2780cis and MCF7‐TAMR1) but not in non‐tumorigenic cells (MRC5), demonstrating that a redox‐targeting mechanism may generate selectivity for cancer cells.

Pyrrolopyrimidinehydrazide‐2‐chlorobenzaldehyde Metal Complexes: Synthesis, Characterization, and Extraordinary Exploration Through in Vitro, in Vivo Cytotoxicity, and Cutting‐Edge Computational Analyses

ABSTRACTThis study reports the successful synthesis and characterization of five novel metal complexes (1–5) derived from the pyrrolopyrimidinehydrazide‐2‐chlorobenzaldehyde ligand, HPPHoCBA (L). The metal complexes demonstrated non‐electrolytic behavior and distinct geometries, as confirmed through comprehensive physicochemical analyses. Importantly, the synthesized complexes exhibited significantly enhanced antimicrobial, antioxidant, and cytotoxic activities compared to the ligand HPPHoCBA (L). Molecular docking studies revealed superior binding affinities of Pd(II) (1) and Cd(II) (4) complexes, which were further substantiated by pharmacophore modeling. Additionally, density functional theory (DFT) and molecular electrostatic potential (MEP) analyses provided insights into the stability and reactivity of these complexes, suggesting their potential in future therapeutic applications. These findings underscore the potential biomedical and industrial applications of the synthesized metal complexes.

Synthesis, Urease Inhibition, Molecular Docking, and Optical Analysis of a Symmetrical Schiff Base and Its Selected Metal Complexes.

Designing and developing small organic molecules for use as urease inhibitors is challenging due to the need for ecosystem sustainability and the requirement to prevent health risks related to the human stomach and urinary tract. Moreover, imaging analysis is widely utilized for tracking infections in intracellular and in vivo systems, which requires drug molecules with emissive potential, specifically in the low-energy region. This study comprises the synthesis of a Schiff base ligand and its selected transition metals to evaluate their UV/fluorescence properties, inhibitory activity against urease, and molecular docking. Screening of the symmetrical cage-like ligand and its metal complexes with various eco-friendly transition metals revealed significant urease inhibition potential. The IC50 value of the ligand for urease inhibition was 21.80 ± 1.88 µM, comparable to that of thiourea. Notably, upon coordination with transition metals, the ligand-nickel and ligand-copper complexes exhibited even greater potency than the reference compound, with IC50 values of 11.8 ± 1.14 and 9.31 ± 1.31 µM, respectively. The ligand-cobalt complex exhibited an enzyme inhibitory potential comparable with thiourea, while the zinc and iron complexes demonstrated the least activity, which might be due to weaker interactions with the investigated protein. Meanwhile, all the metal complexes demonstrated a pronounced optical response, which could be utilized for fluorescence-guided targeted drug delivery applications in the future. Molecular docking analysis and IC50 values from in vitro urease inhibition screening showed a trend of increasing activity from compounds 7d to 7c to 7b. Enzyme kinetics studies using the Lineweaver-Burk plot indicated mixed-type inhibition against 7c and non-competitive inhibition against 7d.

Biological activities of metal complexes with Schiff base

Abstract Schiff bases are a class of synthetic compounds that form when primary amines combine with aldehydes or ketones. These compounds are incredibly important across various fields, such as biology, catalysis, and optics, due to their diverse features. One notable aspect is their ability to form complexes with transition metals, which opens up a wide range of potential uses, particularly in human systems. In the human body, Schiff base metal complexes display a range of biological actions, including antibacterial, antifungal, anticancer, and antimalarial properties. The versatility of Schiff bases in reacting with different transition metals gives these complexes intriguing potential for addressing biological issues and treating diseases. This article explores various examples of Schiff bases, metal complexes, and their associated ligands, highlighting their usefulness in a variety of biological applications. The potential of Schiff base metal complexes as valuable agents in resolving medical difficulties and advancing biomedical research is emphasized.

Metal Ruthenium Complexes Treat Spinal Cord Injury By Alleviating Oxidative Stress Through Interaction With Antioxidant 1 Copper Chaperone Protein.

Oxidative stress is a major factor affecting spinal cord injury (SCI) prognosis. A ruthenium metal complex can aid in treating SCI by scavenging reactive oxygen species via a protein-regulated mechanism to alleviate oxidative stress. This study aimed to introduce a pioneering strategy for SCI treatment by designing two novel half-sandwich ruthenium (II) complexes containing diverse N^N-chelating ligands. The general formula is [(η6-Arene)Ru(N^N)Cl]PF6, where arene is either 2-phenylethanol-1-ol (bz-EA) or 3-phenylpropanol-1-ol (bz-PA), and the N^N-chelating ligands are fluorine-based imino-pyridyl ligands. This study shows that these ruthenium metal complexes protect neurons by scavenging reactive oxygen species. Notably, η6-Arene substitution from bz-PA to bz-EA significantly enhances reactive oxygen species scavenging ability and neuroprotective effect. Additionally, molecular dynamics simulations indicate that the ruthenium metal complex increases Antioxidant 1 Copper Chaperone protein expression, reduces oxidative stress, and protects neurons during SCI treatment. Furthermore, ruthenium metal complex protected spinal cord neurons and stimulated their regeneration, which improves electrical signals and motor functions in mice with SCI. Thus, this treatment strategy using ruthenium metal complexes can be a new therapeutic approach for the efficient treatment of SCI.

Ancillary Ligand-Promoted Charge Transfer in Bis-indole Pyridine Ligand-Based Nickel Complexes.

There is growing demand for the utilization of first-row transition metal complexes in light-driven processes instead of their conventional noble metal counterparts due to the greater sustainability of first-row transition metal complexes. However, their major drawback is the ultrafast lifetime of the electronic excited states of these first-row transition metal complexes, particularly those of d8 square-planar systems such as Ni(II) complexes, wherein low-lying metal-centered (MC) states provide the deactivation pathway. To increase the excited-state lifetime and broaden their applications, it is important to develop sterically bulky, strong field ligands with low-lying π* orbitals and a highly σ-donating nature to augment the energy of MC states. The current strategy relies on synthetically carbene-based ligands, which are substitutionally cumbersome and act as σ-donors only. In this work, we introduce a bis-indole pyridine (H2BIP) ligand framework, whose dianionic congener (BIP) demonstrates the ability to form stronger covalent bonds with a Ni(II) center compared to neutral donors like carbene and its effect on the complex to produce a less distorted excited-state structure. When conjoined with ancillary ligands such as pyridine or lutidine, the BIP ligand orchestrates the formation of low-energy 3CT states, which decay in ∼40 ps.

Photoactivated Anticancer Activity of Cobalt(III) Complexes with Naturally Occurring Flavonoids Chrysin and Silibinin.

Photoactive metal complexes of bioessential transition metal ions with natural chelators are gaining interest as photocytotoxic agents for cancer photodynamic therapy (PDT). We report six new cobalt(III) complexes with a mixed-ligand formulation [Co(B)2(L)](ClO4)2 (Co1-Co6), where B represents a N,N-donor α-diimine ligand, namely, phenanthroline (phen; Co1, Co2), dipyrido[3,2-d:2',3'-f]quinoxaline (dpq; Co3, Co4), and dipyrido[3,2-a:2',3'-c]phenazine (dppz; Co5, Co6), and L is the monoanionic form of the naturally occurring flavonoids chrysin (chry; Co1, Co3, Co5) and silibinin (sili; Co2, Co4, Co6). Complexes displayed a d-d absorption band within 500-700 nm and exhibited excellent dark and photostability in solution. Cytotoxicity studies indicated significant activity of Co5 and Co6 against cervical (HeLa) and lung (A549) cancer cells under visible light (400-700 nm) irradiation giving low micromolar IC50 values (2.3-3.4 μM, phototoxicity index~15-30). The complexes demonstrated notably low toxicity against normal HPL1D lung epithelial cells. Flow cytometry assay revealed an apoptotic mode of cell damage triggered by the complexes when irradiated. ROS generation assay indicated the involvement of singlet oxygen species in the cell death mechanism when irradiated with light. Overall, complexes Co5 and Co6 with coordinated dipyridophenazine and flavonoid ligands are potential candidates for cancer PDT applications.

Solvent assisted mechanochemical synthesis, antimicrobial and antioxidant studies of Ni2+, Mn2+, Cr<sup>2+</sup> , and Cu<sup>2+</sup> Metal complexes of some ligands derived from l-histidine and l-alanine

Mechanochemistry enables rapid, quantitative reactions to occur at or close to 27℃. It is a one-step process that allows for reactant homogenization, product nucleation, and particle growth. These processes use little or no solvent, making them less wasteful and more environmentally friendly than solvent-based reactions. Ni2+ , Mn2+, Cr2+and Cu2+ metal ions were synthesized by grinding in an agate mortar with pestle using ligands derived from amino acids (Histidine &Alanine) which were further synthesized to form complexes. The entire experiment was carried out by solvent solvent-assisted mechanochemical process and ethanol was used as liquid liquid-assisted solvent. The complexes were characterized by IR spectroscopy, U-V spectroscopy, X-ray analysis, melting point, solubility test, and conductivity measurement. The Solubility test showed that the complexes are soluble in DMSO, DMF, and ethanol and are insoluble in both hexane and tetrachloromethane. The molar conductivity values are in the range of (6.05-28.56) Ω-1cm2mol-1 ) indicating the complexes behave as non-electrolytes. IR analysis showed a vibrational frequency band observed at (1620-1625) cm-1 which is assigned to the ʋ(C=N) of the azomethine, also the new bands M=N, M=O indicate the coordination reaction between the metal and the ligands. The UV visible analysis shows various transitions, the metal complexes showed adsorption bands at λ of 420 and 575nm respectively because of the ligand-to-metal charge transfer (LMCT). The XRD analysis showed that there was a change in phase between the starting material and the product which indicate that a reaction occurred, also the nature of the spectra showed that the compounds are all crystalline. The Antimicrobial activity showed that both the complexes and the ligands have good activity against the bacterial isolates. Antioxidant activity was also tested and the compound appeared to have moderate scavenging activities compared to the reference used. The values indicated that the activities are more pronounced when coordinated with metal ions.

Enabling tailored microstructures by hybrid directed energy deposition processing of a nickel-based superalloy

The technological advances in additive manufacturing, particularly laser based directed energy deposition (DED), revolutionized the production of complex metal components. Despite this progress, the oriented heat flux and several reheating thermal cycles can induce a strongly textured microstructure, which induces an anisotropic mechanical behavior. In addition, considerable residual stresses typically require additional post-processing. Therefore, hybrid process chains for additive manufacturing (AM) are being developed, which aim at integrating conventional post-processing into the AM process. However, a detailed investigation of thermal and mechanical effects of such hybrid processes on the mechanical properties and their interrelation is lacking. In an experimental study, we explore the integration of thermal and mechanical processing steps within the DED process chain to locally tailor microstructures and mechanical properties. Through electron backscatter diffraction measurements, we demonstrate significant microstructural changes of DED-manufactured nickel-based superalloy samples using deep rolling and laser heat treatment. A mechanical surface deformation induces microstructural misorientation leading to an increase in hardness down to substantial depth of several hundred micrometers. Additionally, the targeted management of heat input during laser heat treatment results in different grain morphologies and sizes, affecting average microhardness within a significant depth. The results demonstrate the potential for microstructural tailoring using hybrid AM process chains, while a substantial sensitivity of the microstructure to thermal and mechanical load emphasizes the importance of a precise process control. This work provides an understanding of the process-microstructure-property relationship required for developing new process pathways in hybrid AM that integrate thermal and mechanical processes into DED manufacturing.

Synthesis and Characterization of Extremely Bulky Aminopyridinate Ligands and a Series of Their Groups 1 and 2 Metal Complexes

High-yielding synthetic routes to five new extremely bulky aminopyridine pro-ligands were developed, viz. (C5H3N-6-Ar1)N(H)Ar2-2; Ar1 = Trip, Ar2 = TCHP (HAmPy1), Ar* (HAmPy2) or Ar† (HAmPy3); Ar1 = TCHP, Ar2 = Ar* (HAmPy4) or Ar† (HAmPy5) (Trip = 2,4,6-triisopropylphenyl, TCHP = 2,4,6-tricyclohexylphenyl, Ar* = C6H2(CHPh2)2Me-2,6,4, Ar† = C6H2(CHPh2)2Pri-2,6,4. Four of these were deprotonated with LiBun in diethyl ether to give lithium aminopyridinate complexes which were dimeric for the least bulky ligand, [{Li(AmPy1)}2] or monomeric for the bulkier aminopyridinates, i.e., in [Li(AmPy2−4)(OEt2)]. One aminopyridine was deprotonated with MeMgI to give monomeric [Mg(AmPy3)I(OEt2)2]. When treated with sodium or potassium mirrors or 5% w/w Na/NaCl, over-reduction occurred, leading to the alkali metal aminopyridinates, [M(AmPy3)(η6-toluene)] (M = Na or K) or [{Na(AmPy3)}∞]. An attempted reduction of [Mg(AmPy3)I(OEt2)2] with a dimagnesium(I) compound led only to partial loss of diethyl ether and the formation of [(AmPy3)Mg(μ-I)2Mg(AmPy3)(OEt2)]. All prepared complexes have potential as ligand transfer reagents in salt metathesis reactions with metal halide complexes.

Spin Crossover and Its Application in Organometallic Catalysis: Concepts and Recent Progress.

Spin crossover is one of the most important properties of open-shell metal complexes. In organometallic catalytic reactions, catalysts can alter reaction kinetics by spin crossover, i.e., accelerating or hindering the reaction progression, as well as altering reaction pathways, modulating the reaction selectivity or promoting new reactions. This personal account outlines the introduction and development of important concepts such as "two-state reactivity" involving spin crossover, and proposes a new concept, "spin-responsive catalysis" to summarize the catalytic processes in which spin effects are present. Finally, the electronic mechanism of spin crossover accelerating the reaction and the role of spin crossover in changing the reaction path and regulating the reaction selectivity are introduced by taking two recent typical iron-catalyzed reactions recently reported by our group as examples.

The bimetallic 3,5-dinitrobenzoate composites: A flexible-synergistic catalysts for high-performance decomposition of ammonium perchlorate

Composites of metal complexes have catalytic effects on the thermal decomposition of ammonium perchlorate (AP), while the kinetics and mechanism studies of the processes are seldom mentioned. Here, composite microspheres of cupric 3,5-dinitrobenzoate and cobalt 3,5-dinitrobenzoate [(3,5-DNB)Cox•Cuy] were synthesized and employed to research the kinetics and mechanism of AP catalytic decomposition. The decomposition peak temperature of AP in the presence of the (3,5-DNB)Cox•Cuy microspheres decreased from 403 °C (pure AP) to 288 °C, and the released heat increased by 384.5–745.6 J/g. Notably, the (3,5-DNB)Cox•Cuy microspheres significantly improved the kinetic rate constant by 1.83–37.75 times. The (3,5-DNB)Cox•Cuy microspheres exhibited higher activity than their corresponding single components for the thermal decomposition of AP, indicating excellent synergistic effects and proposing a possible mechanism. Understanding the kinetics and mechanism of the catalytic process developed in this study could further improve the decomposition performance of AP.

Investigations of the Cold Box Core Curing Stage Using an Augmented Simulation Approach

AbstractFoundry sand cores are used to produce complex metal castings. They are manufactured on universal coremaking machines in two distinct stages, shooting and curing. Various simulation tools exist to optimize the coremaking process. Numerical modeling of the two distinct process stages is challenging as it involves different tooling, raw materials, and process parameters. Additionally, each stage requires appropriate mathematical modeling of the fluid flow since the relevant physical phenomena are different. The state-of-the-art combined simulation approach (CA) can simulate these two stages in sequence using a Core shooting & curing module. The gassing system (GS) is also important to consider when calculating the complete physical mass flow during the curing stage in CA. An augmented simulation approach (AA) is proposed, which can include GS in the coremaking simulations. This approach enables the execution of two-stage combined simulations (CA) using Magma C + M software (SW1) and incorporates GS data using FLOW-3D CAST software (SW2). In order to analyze the influence of including selected factors such as the hopper during the shooting stage and GS during the curing stage, the simulation approaches CA and AA were compared. The simulation results were correlated with experiment results (EX) to analyze sand density distribution and different curing times, focusing on the final core quality. Quantity analysis has been done among EX samples to observe the cured core trend. The results obtained from AA exhibit a significantly better correlation with EX than with CA. The proposed augmented approach offers significant potential for the improved analysis, optimization, and accurate prediction of complex coremaking processes within polyurethane (PU) Cold Box Systems.

Solution State-Like Reactivity of a Flexible Crystalline Werner-Type Metal Complex.

Flexible crystalline solids exhibit unique properties in response to external stimuli like heat and light. However, challenges exist in developing crystalline solids that have similar degrees of flexibility as in solution. Herein, we report the preparation of the new flexible crystalline metal complex [Cd(CF3SO3)2(4-spy)4] (4-spy=4-styrylpyridine), which contains photoreactive 4-spy ligand. Unlike traditional solids, this metal complex displays solution state-like [2+2] photocycloaddition reactivity. Specifically, UV irradiation of the crystalline material leads to formation of the same diverse array of dimers and cis isomer that are generated by photoreaction in the solution state. In addition, the photoresponsive flexibility of the solid leads to a photosalient effect and photo-induced formation of pores. The origin of the solution state-like photoreactivity of the solid is related to properties of the Cd(II) cation and fluorinated CF3SO3 anion, and the multi-orientational arrangement of the 4-spy ligands.

Synthesis, thermal and spectroscopic analysis, antimicrobial activities and molecular modeling of zinc(II) metal complex of benzoyl glycine

To analyze ligand characteristics and use, a benzamide-derived ligand(benzoyl glycine) was synthesized and characterized before complexing it with zinc(II) ions. The ligand was formed from benzamide and glycine, obtained upon purification and precipitation. FTIR and 1H NMR were used to characterize the ligand. Furthermore, thermogravimetric analysis (TGA) was used to study the thermal behavior of the ligand and its Zn(II) complex, revealing important thermodynamic characteristics. The zinc complex was subjected to X-ray powder diffraction experiments, which yielded structural insights. Density Functional Theory (DFT) calculations were used in molecular modeling to clarify structure and characteristics of the molecules. Moreover, anti-microbial tests were used to assess biological activity against E. Coli and A. Niger. This thorough investigation lays the foundation for future research in this area by offering insightful information about the synthesis, characterization, and possible uses of the ligand and its Zn(II) metal complexes.

Heterometallic Molecular and Ionic Isomers.

Numerous descriptions of structural isomerism in metal complexes do not list any molecular vs ionic isomers. At the same time, one of the most striking examples of structural isomerism in organic chemistry is molecular urea, which has the same atomic composition as the chemically distinct ionic ammonium cyanate. This iconic organic couple now meets its inorganic heterometallic counterpart. We introduce a new class of structural isomers, molecular vs ionic, that can be consummated in complex and coordinatively unsaturated polynuclear/heterometallic compounds. We report inorganic molecular and ionic isomers of the composition [NaCrFe (acac)3(hfac)3] (acac = acetylacetonate; hfac = hexafluoroacetylacetonate). Heterometallic molecular [CrIII(acac)3-Na-FeII(hfac)3] (1m) and ionic {[CrIII(acac)3-Na-CrIII(acac)3]+[FeII(hfac)3-Na-FeII(hfac)3]-} (1i) isomers have been isolated in pure form and characterized. While both ions are heterobimetallic trinuclear entities, the neutral counterpart is a heterotrimetallic trinuclear molecule. The two isomers exhibit distinctly different characteristics in terms of solubility, volatility, mass spectrometry ionization, and thermal behavior. Unambiguous assignment of the positions and oxidation/spin states of the Periodic Table neighbors, Fe and Cr, in both isomers have been made by a combination of characterization techniques that include synchrotron X-ray resonant diffraction, synchrotron X-ray fluorescence spectroscopy, Mössbauer spectroscopy, and DART mass spectrometry. The transformation between the two isomers that does take place in solutions of noncoordinating solvents has also been tested.

Synthesis, Identification, and anti-cancer Evaluation of Some heterocyclic Chitosan-Thiosemicarbazones compounds and their nickle (II) complexes

Chitosan (CS) a chemical substance taken from the shells of sea creatures that has various uses in industry, farming, and medicine, for example in medical dressings. Its derivatives significantly inhibit two types of cancer cells: Madin Darby Canine Kidney MDCK and MCF-7. These derivatives include thiosemicarbazones, heterocyclic moieties, and their metal (II) complexes. In this study, CS from crab shells is mixed with thiosemicarbazide (TSC). Then, imidazole-2-carboxaldehyde, oxazole-2-carboxaldehyde, and thiazole-2-carboxaldehyde reacted to make three different compounds from CS-TSC: [2a], [2b], and [2c]. The chemicals were mixed with nickel chloride to create nickel (II) chitosan 2-acetyl heterocyclic-2-thiosemicarbazone complexes. SEM and X-ray tests were performed on the powder, which showed that the nickel (II) chitosan thiosemicarbazone complexes had square and flat shapes. The synthesized compounds were tested to check their effectiveness in preventing MDCK and MCF-7. The study found that chitosan derivatives significantly inhibited MDCK and MCF-7.

Potential of organometallic complexes in medicinal chemistry

Abstract Organometallic complexes, which include ligands such as carbon monoxide (CO), carbenes, alkyls, phenyls, p-bound alkynes, alkenes, cyclopentadienyls, and arenes, have been extensively utilized in fields like materials chemistry and catalysis. These complexes also offer opportunities for the development of new medications with unique modes of action. Specifically, we are interested in anticancer drugs that can enhance the effectiveness of platinum treatments, broaden their range of action, reduce adverse effects, and prevent resistance. The distinct physiochemical properties of organometallic complexes have made them valuable in homogeneous catalysis, including the production of lead compounds and therapeutic possibilities. Over the past 20 years, a small group of researchers worldwide has explored the medical applications of these compounds’ unique characteristics, such as their structural diversity, potential for ligand exchange, and redox and catalytic properties. The results have been remarkable, and it is anticipated that numerous other organometallic compounds will undergo clinical trials in the coming years in addition to those already underway. In this brief study, we outline the advantages that organometallic metal complexes have over coordination compounds and pure organic molecules.

Supported Binuclear Gold Phosphine Complexes as CO Oxidation Catalysts: Insights into the Formation of Surface‐Stabilized Au Particles

Atomically precise gold phosphine complexes as precursors for supported Au catalysts tested in CO oxidation are presented. Using a variety of analytical techniques, including in situ and operando X‐ray absorption spectroscopy, it is discovered that minor changes in the ligand of the molecular complexes result in significantly different activation behaviors of supported Au catalysts under reaction conditions. When using [Au2(μ2‐POP)2]OTf2 (POP = tetraphenylphosphoxane) as single‐source precursor, an active supported oxidation catalyst in second light‐off is obtained, outperforming a commercial Au/TiO2 and a P‐free Au/Al2O3 reference catalyst. Conversely, using [Au2(μ2‐dppe)2]OTf2 (dppe = diphenylphosphinoethane) on alumina leads to a significant decrease in CO oxidation activity. This difference is attributed to the formation of P‐containing ligand residues on the support in the case of [Au2(μ2‐POP)2]OTf2/Al2O3, which enhances the thermal stability of the Au particles and affects the particle's electronic properties through charge transfer processes. This work provides insights into the dynamic ligand decomposition of molecular gold complexes under reaction conditions and demonstrates the delicate balance between the stabilization of Au particles, clusters, and complexes using ligands and the blocking of active sites. This knowledge will pave the way for the targeted use of molecular transition metal complexes as precursors in synthesizing surface‐stabilized nanoparticles.

Study of the rotating arc on the tribological behavior of hardbanding for oil drilling tubes

In this work, four welded coupons were evaluated with a welding speed of 5, 9, 11 and 13 mm/s. A semi-automatic welding process was used under gas protection, using a 1.6 mm diameter tubular wire. The chemical composition was analyzed on each welded coupon, the dilution percentage was determined, the dimensional of the beads was carried out and the microstructure was characterized by optical microscopy and scanning electron microscopy. In addition, the Vickers microhardness HV2 in the middle of the bead were measured. It was found that the dilution decreased up to 22% (a decrease of 80% compared to traditional welds). Furthermore, the beads presented less refusion with the base material, increasing their width and penetration. A microstructure formed by an “α matrix” was observed, with complex metallic carbides and carboborides which increased in quantity when considering the effects of the rotating arc method Also, it was observed a microstructure formed by a matrix α with complex metal carbides and carboborides that increased in quantity with the effect of the rotating arc. The hardness of the beads varied between 720 and 780 HV2. The weight loss and the friction coefficient decreased with the application of the arc rotation. These changes would be related to the increase in non-metallic phases.