Membrane Configuration Research Articles

An Evidence-Based Survey on Full-Scale Membrane Biological Reactors: Main Technical Features and Operational Aspects

This paper presents the results of a survey on full-scale membrane biological reactors (MBRs) wastewater treatment plants (WWTPs) in Italy. Alongside the main technical characteristics of the Italian MBR plants, the opinions of the plant managers on the operational advantages and disadvantages are described. As reported by the MBR technology suppliers, approximately 290 MBR municipal or industrial WWTPs are in operation in Italy, out of which 242 were studied in this survey. Data from more than one hundred municipal WWTPs were collected; these account for a total capacity of about 2,000,000 population equivalent (PE), which corresponds to 3% of the total organic load treated by the Italian WWTPs with secondary and advanced treatment. Usually, small installations adopt the flat-sheet rather than hollow-fiber membrane configuration. The main reasons why the MBR technology has been preferred to other options are its potential to be used for increasing the treatment capacity of existing plants and its compactness. Moreover, the followed operational advantages have been highlighted: easiness to comply with the discharge limits, removal of pathogens without specific disinfection units, possibility of internal reuse of the effluent, and process automation. Membrane fouling and plant shutdown have been recorded as the most relevant troubles, the last one indeed occurring only occasionally or rarely.

Dual-Phase Mixed Protonic-Electronic Conducting Hydrogen Separation Membranes: A Review

Owing to the excellent properties of high selectivity, high thermal stability, and low cost, in the past twenty years, mixed protonic-electronic conducting hydrogen separation membranes have received extensive attention. In particular, dual-phase mixed protonic-electronic conducting membranes with high ambipolar conductivity are more attractive because of the high hydrogen permeability. This paper aimed to present a review of research activities on the dual-phase membranes, in which the components, the characteristics, and the performances of different dual-phase membranes are introduced. The key issues that affect the membrane performance such as the elimination of the inter-phase reaction, the combination mode of the phases, the phase ratio, and the membrane configuration were discussed. The current problems and future trends were simply recommended.

Experimental investigation of flow around a circular cylinder with attached membranes

We study experimentally the reduction of mean force and suppression of force fluctuation on a circular cylinder by attaching flexible membranes to the surface of the cylinder. The experiments were conducted in a wind tunnel. The configuration of a single membrane with a length of two cylinder diameters, i.e. L/D=2, is found to be optimal for mean force reduction. At the Reynolds number Re=1.07×104, with a wide range of attaching angles, 0°≤θ≤60° and 135°≤θ≤180°, the mean forces are found to be reduced, demonstrating the control effect adaptive to the change of flow directions, would be valuable in real applications. The optimal configuration for suppression of force fluctuation is that with two short membranes 180o apart, which we believe can potentially reduce the vortex induced vibration (VIV). For two short membranes, i.e. L/D=0.5, the magnitudes of force fluctuation are found to be reduced at almost all attaching angles, with both Reynolds numbers currently studied. We have also investigated the flow wakes by using smoke streaklines and particle image velocimetry (PIV) technique. To understand the physical mechanisms for suppression of force fluctuation with two membranes, we highlight a specific attaching angle, θ=90o. A strong correlation between the flow wake structure and the suppressing effect is revealed. The wake periodicity is observed to be completely inhibited, by this symmetrically configured two membranes, compared to that with a single one, resulting in a remarkable suppression of force fluctuation.

The Posterior Atlantooccipital Membrane: The Anchor for the Myodural Bridge and Meningovertebral Structures.

Introduction: Sheet plastination has provided evidence that the posterior atlantooccipital membrane attaches to the dura’s posterior sleeve at the cerebrospinal junction. These findings contradict the traditional anatomical description of this membrane extending from the atlas’ posterior arch to the foramen magnum.Methods: A total of 16 plastinated cadavers were studied to evaluate the in situ and gross configuration of the posterior atlantooccipital membrane. Fifteen cadavers underwent sheet plastination, and one head was hemisected and plastinated. In all specimens, stereomicroscopy was used to evaluate the posterior atlantooccipital membrane and related structures within the intervertebral and epidural spaces.Results: In all 16 specimens, the posterior atlantooccipital membrane extending from the occiput, merged with the craniocervical dura mater, and formed a membrane-dura complex that ended at the level of the third cervical vertebra. The superior and inferior myodural bridge coalesced with their respective vertebrodural ligaments and fused with the posterior atlantooccipital membrane at their respective interspaces.Conclusion: The median aspect of the posterior atlantooccipital membrane does not directly communicate with the posterior arch of the atlas. Instead, the posterior atlantooccipital membrane converges with the craniocervical dura mater and terminates at the level of the third cervical vertebra. This membrane-dura complex serves as a common attachment site for the myodural and vertebrodural structures.

State-of-the-Art Organic- and Inorganic-Based Hollow Fiber Membranes in Liquid and Gas Applications: Looking Back and Beyond.

The aggravation of environmental problems such as water scarcity and air pollution has called upon the need for a sustainable solution globally. Membrane technology, owing to its simplicity, sustainability, and cost-effectiveness, has emerged as one of the favorable technologies for water and air purification. Among all of the membrane configurations, hollow fiber membranes hold promise due to their outstanding packing density and ease of module assembly. Herein, this review systematically outlines the fundamentals of hollow fiber membranes, which comprise the structural analyses and phase inversion mechanism. Furthermore, illustrations of the latest advances in the fabrication of organic, inorganic, and composite hollow fiber membranes are presented. Key findings on the utilization of hollow fiber membranes in microfiltration (MF), nanofiltration (NF), reverse osmosis (RO), forward osmosis (FO), pervaporation, gas and vapor separation, membrane distillation, and membrane contactor are also reported. Moreover, the applications in nuclear waste treatment and biomedical fields such as hemodialysis and drug delivery are emphasized. Subsequently, the emerging R&D areas, precisely on green fabrication and modification techniques as well as sustainable materials for hollow fiber membranes, are highlighted. Last but not least, this review offers invigorating perspectives on the future directions for the design of next-generation hollow fiber membranes for various applications. As such, the comprehensive and critical insights gained in this review are anticipated to provide a new research doorway to stimulate the future development and optimization of hollow fiber membranes.

Direct Visualization and Identification of Membrane Voltage-Gated Sodium Channels from Human iPSC-Derived Neurons by Multiple Imaging and Light Enhanced Spectroscopy.

In this study, transmission electron microscopy atomic force microscopy, and surface enhanced Raman spectroscopy are combined through a direct imaging approach, to gather structural and chemical information of complex molecular systems such as ion channels in their original plasma membrane. Customized microfabricated sample holder allows to characterize Nav channels embedded in the original plasma membrane extracted from neuronal cells that are derived from healthy human induced pluripotent stem cells. The identification of the channels is accomplished by using two different approaches, one of them widely used in cryo-EM (the particle analysis method) and the other based on a novel Zernike Polynomial expansion of the images bitmap. This approach allows to carry out a whole series of investigations, one complementary to the other, on the same sample, preserving its state as close as possible to the original membrane configuration.

Ambient NO2 exposure induced cardiotoxicity associated with gut microbiome dysregulation and glycerophospholipid metabolism disruption

An average daily increase of 10 μg/m3 in NO2 concentrations could lead to an increased mortality in cardiovascular, cerebrovascular of 1.89%, 2.07%, but the mechanism by which NO2 contributes to cardiotoxicity is rarely reported. In order to assess the cardiotoxicity of NO2 inhalation (5 ppm), we firstly investigate the change of gut microbiota, serum metabonomics and cardiac proteome. Non-targeted LC-MS/MS metabonomics showed that NO2 stress could perturb the glycerophospholipid metabolism in the serum, which might destabilize the bilayer configuration of cardiac lipid membranes. Furthermore, we observed that NO2 inhalation caused augmented intercellular gap and inflammatory infiltration in the heart. Although 16 S rRNA gene amplification sequencing demonstrated that NO2 exposure did not influence the intestinal microbial abundance and diversity, but glycerophospholipid metabolism disruption might be finally reflected in gut microbiom dysregulation, such as Sphingomonas, Koribacter, Actinomarina and Bradyrhizobium Turicibacter, Rothia, Globicatella and Aerococcus. Proteome mining revealed that differentially expressed genes (DEGs) in the heart after NO2 stress were involved in necroptosis, mitophagy and ferroptosis. We further revealed that NO2 increased the number of cardiac mitochondria with depletion of cristae by regulating the expression of Mfn2 and Hsp70. This study indicating Mfn2-meidcated imbalanced mitochondrial dynamics as a potential mechanism after NO2-induced heart injury and suggesting microbiome dysregulation/glycerophospholipid metabolism exerts critical roles in cardiotoxicity caused by NO2.

Armor-Structured Interconnected-Porous Membranes for Corrosion-Resistant and Highly Permeable Waste Ammonium Resource Recycling.

Ammonium recovery from wastewater by gas-permeable membranes is promising but suffers from the tradeoff between membrane stability and permeability under harsh operating conditions. Chemical-resistant membranes display modest permeability due to the poor solubility and processibility; chemically active membranes are easier to be endowed with better permeability however hinder by instability. To resolve such a problem, we cleverly design a novel membrane configuration via one-step solution-electrospinning, with the chemical-active component (low-strength fluorine polymer) as the inner skeleton to construct interconnected porous structures and the chemical-resistant component (high-strength fluorine polymer) as the outer armor to serve as a protective layer. Due to the significantly enhanced mass transfer coefficient, the interconnected-porous armor-structured membrane exhibited much higher permeability for NH4+-N recovery, which was 1.4 and 5 times that of the traditional PTFE membrane and PP membrane, respectively. Through long-term intermittent and consecutive experiments, the reusability and durability of the armor-structured nanofibrous membrane were verified. When treating actual hoggery wastewater with complicated water quality, the armor-structured nanofibrous membrane also displayed robust stable performance with excellent antiwettability. The mechanisms of membrane formation, corrosion resistance, and mass transfer were discussed in detail.

Asymmetric Nanochannel Network-Based Bipolar Ionic Diode for Enhanced Heavy Metal Ion Detection

A higher rectification degree in ionic diodes is required to achieve better performance in applications. Nonetheless, the active geometrical change that is critical for inducing electrical potential asymmetry is difficult to realize in typical ionic diodes because of the intrinsic limitation of the fabrication method. Here, we propose a nanochannel-network-based bipolar diode with a high rectification degree of ∼1600─the highest value realized until now, to the best of our knowledge. Such a high rectification is obtained based on the synergetic effect of the bipolar surface charge and the optimization of the microchannel through experimental studies and multiphysics numerical simulations. It induces ion concentrations at the heterogeneous junction based on the accumulation effect under the forward potential bias. In particular, this proposed molecular concentration occurs in the ohmic region without vortex and instability that is inevitable at the conventional nano-electrokinetic concentration. Combining this accumulation with the horizontally aligned configuration of the nanochannel network membrane (NCNM), a highly sensitive and quantitative mercury ion (Hg2+) sensor based on a fluorescent signal is fabricated that allows direct measurement using a general fluorescent microscope. The detection limit of Hg2+ is 10 pM, which is ∼10 times lower than the best detection limit realized so far (∼100 pM) in fluorescent dye-based detection. This demonstrates the potential of asymmetric NCNM for high-performance ion transport in applications such as energy conversion, based on its design and material flexibility.

Structural Configuration of Blood Cell Membranes Determines Their Nonlinear Deformation Properties.

The ability of neutrophils and red blood cells (RBCs) to undergo significant deformations is a key to their normal functioning. Disruptions of these processes can lead to pathologies. This work studied the influence of structural configuration rearrangements of membranes after exposure to external factors on the ability of native membranes of neutrophils and RBCs to undergo deep deformation. The rearrangement of the structural configuration of neutrophil and RBC membranes under the influence of cytological fixatives caused nonlinear deformation phenomena. There were an increase in Young's modulus, a decrease in the depth of homogeneous bending, and a change in the distance between cytoskeletal junctions. Based on the results of the analysis of experimental data, a mathematical model was proposed that describes the process of deep bending of RBСs and neutrophil membranes.

Mitochondrial Lipids: From Membrane Organization to Apoptotic Facilitation

Mitochondria are the most complex intracellular organelles, their function combining energy production for survival and apoptosis facilitation for death. Such a multivariate physiology is structurally and functionally reflected upon their membrane configuration and lipid composition. Mitochondrial double membrane lipids, with cardiolipin as the protagonist, show an impressive level of complexity that is mandatory for maintenance of mitochondrial health and protection from apoptosis. Given that lipidomics is an emerging field in cancer research and that mitochondria are the organelles with the most important role in malignant maintenance knowledge of the mitochondrial membrane, lipid physiology in health is mandatory. In this review, we will thus describe the delicate nature of the healthy mitochondrial double membrane and its role in apoptosis. Emphasis will be given on mitochondrial membrane lipids and the changes that they undergo during apoptosis induction and progression.

Stability of Graphene Oxide Composite Membranes in an Aqueous Environment from a Molecular Point of View

We used molecular dynamics to investigate the stability of graphene oxide (GO) layers supported on three polymeric materials, namely a polyvinylidene fluoride (PVDF), a pristine and a crosslinked polyamide–imide (PAI and PAI-cr). The membrane configurations consisted of a few layers of GO nanosheets stacked over the specified polymeric supports and submerged in water. We monitored the position, the tilt angle, and the radial distribution function of the individual GO nanosheets in respect to the plane of the supports. We showed that the outermost GO nanosheets were more distorted than those attached directly on the supports. The greatest distortion was observed for the GO nanosheets of the PVDF-supported system. Next, we recorded the density profiles of the water molecules across the distance from the layers to the polymer and discussed the hydrogen bonds between water hydrogens and the oxygen atoms of the GO functional groups.

Integration of Nanofiltration and Reverse Osmosis Technologies in Polyphenols Recovery Schemes from Winery and Olive Mill Wastes by Aqueous-Based Processing.

More sustainable waste management in the winery and olive oil industries has become a major challenge. Therefore, waste valorization to obtain value-added products (e.g., polyphenols) is an efficient alternative that contributes to circular approaches and sustainable environmental protection. In this work, an integration scheme was purposed based on sustainable extraction and membrane separation processes, such as nanofiltration (NF) and reverse osmosis (RO), for the recovery of polyphenols from winery and olive mill wastes. Membrane processes were evaluated in a closed-loop system and with a flat-sheet membrane configuration (NF270, NF90, and Duracid as NF membranes, and BW30LE as RO membrane). The separation and concentration efficiency were evaluated in terms of the total polyphenol content (TPC), and by polyphenol families (hydroxybenzoic acids, hydroxycinnamic acids, and flavonoids), using high-performance liquid chromatography. The water trans-membrane flux was dependent on the trans-membrane pressure for the NF and RO processes. NF90 membrane rejected around 91% of TPC for the lees filters extracts while NF270 membrane rejected about 99% of TPC for the olive pomace extracts. Otherwise, RO membranes rejected more than 99.9% of TPC for both types of agri-food wastes. Hence, NF and RO techniques could be used to obtain polyphenol-rich streams, and clean water for reuse purposes.

Facile suppression of intensified plasticization in glassy polymer thin films towards scalable composite membranes for propylene/propane separation

Membrane-based propylene/propane (C3H6/C3H8) separation has the potential to significantly reduce the extremely high energy consumption in the conventional distillation process. However, no large-scale commercialization case currently exists despite decades of remarkable advancements in membrane materials. This challenge can potentially be attributed to a lack of understanding of the close relationship between material properties and membrane configurations, including confinement-driven transitions in polymer dynamics from the bulk to thin films (<1 μm). We first report design aspects of thin-film composite (TFC) membranes for C3H6/C3H8 separation based on a cost-effective, versatile, and scalable fabrication method. An unprecedented acceleration in C3 hydrocarbon-induced plasticization is observed in TFC membranes as the selective layer thickness decreases, causing anomalous gas transport properties and poor mixed-gas selectivities, which deviate from those of bulk membranes. To overcome this issue, a plasticization resistant (PR) layer is additionally coated onto the TFC membranes. Advanced thin-film characterization techniques, including quartz crystal microbalance (QCM) and nanomechanical analyses, demonstrate effective suppression of intensified plasticization in glassy polymer thin films by introducing a PR layer. Ultimately, the PR layer-coated TFC membranes exhibited excellent mixed-gas C3H6/C3H8 separation performances close to industrial requirements, which can be further extended to prepare large-area TFC membranes by roll-to-roll processes.

Effect of channel-rib width ratio and relative humidity on performance of a single serpentine PEMFC based on electrochemical impedance spectroscopy

The geometry configuration of proton exchange membrane fuel cell (PEMFC) which is considered as a promising energy conversion device has great influence on PEMFC performance. In this paper, effect of channel-to-rib width ratio and relative humidity of reactant gas on the performance are compared based on two single PEMFCs. The EIS testing results below 50 A are given and analyzed. The results obtained from polarization curves, power density curves and EIS fitting results prove that: 1. Compared with cell 3:4, the anode high humidification has a greater addition to the performance of cell 1:1; 2. PEMFCs with different geometry configurations of flow field have their own suitable working condition ranges; 3. The charge transfer resistance is the dominating factor when current loading is below 2.0 A cm−2.

Enhanced CO2-capture performance of polyimide-based mixed matrix membranes by incorporating ZnO@MOF nanocomposites

Mixed matrix membranes (MMMs) have received numerous interests as promising membrane configurations for dealing with the energy-intensive gas separation processes. In this study, MMMs were fabricated by incorporating novel ZnO@MOF nanocomposites (ZnO@ZnBDC) into Matrimid (PI) matrix. The physico-chemical properties and microstructures of ZnO@ZnBDC nanocomposites and ZnO@ZnBDC/PI MMMs were characterized. The CO2/CH4 separation performance of MMMs was evaluated and analyzed according to the solution-diffusion mechanism. ZnBDC in the nanocomposites increased CO2 permeability by providing mass transfer pathways with low resistance in the MMMs, while ZnO increased the CO2/CH4 selectivity via high CO2 affinity. Owing to the synergistic effect of the nanocomposites, MMMs with 0.75 wt% ZnO@ZnBDC showed CO2 permeability of 11.5 Barrer and CO2/CH4 selectivity of 39.5, which increased by 67% and 33%, respectively, by comparing with control PI membrane.

Investigation on GaN-Based Membrane Photonic Crystal Surface Emitting Lasers.

A GaN-based blue photonic crystal surface emitting laser (PCSEL) featured with membrane configuration was proposed and theoretically investigated. The membrane dimension, photonic crystal (PhC) material, lattice constant and thickness were studied by RCWA (Rigorous Coupled Wave Analysis), FDTD (Finite Difference Time Domain) simulations with the confinement factor and gain threshold as indicators. The membrane PCSEL’s confinement factor of active media is of 13~14% which is attributed to multi-pairs of quantum wells and efficient confinement of the mode in the membrane cavity with air claddings. The excellent confinement factor and larger Q factor of resonance mutually contribute to the lower gain threshold of the design (below 400 cm−1 for GaN-PhC with 100 nm thick top and bottom GaN layer, 40 nm hole radius and 40 nm depth). The PhC confinement factor exceeds 13% and 6% for TiO2-PhC with 80 nm and 60 nm PhC thickness and 20 nm and 40 nm distance between PhC and active media, respectively. It is around two times larger than that of GaN-PhC, which is attributed to the higher refractive index of TiO2 that pulls field distribution to the PhC layer.

Bisphenol A Removal Using Visible Light Driven Cu2O/PVDF Photocatalytic Dual Layer Hollow Fiber Membrane.

Bisphenol A (BPA) is amongst the endocrine disrupting compounds (EDCs) that cause illness to humans and in this work was removed using copper (I) oxide (Cu2O) visible light photocatalyst which has a narrow bandgap of 2.2 eV. This was done by embedding Cu2O into polyvinylidene fluoride (PVDF) membranes to generate a Cu2O/PVDF dual layer hollow fiber (DLHF) membrane using a co-extrusion technique. The initial ratio of 0.25 Cu2O/PVDF was used to study variation of the outer dope extrusion flowrate for 3 mL/min, 6 mL/min and 9 mL/min. Subsequently, the best flowrate was used to vary Cu2O/PVDF for 0.25, 0.50 and 0.75 with fixed outer dope extrusion flowrate. Under visible light irradiation, 10 mg/L of BPA was used to assess the membranes performance. The results show that the outer and inner layers of the membrane have finger-like structures, whereas the intermediate section of the membrane has a sponge-like structure. With high porosity up to 63.13%, the membrane is hydrophilic and exhibited high flux up to 13,891 L/m2h. The optimum photocatalytic membrane configuration is 0.50 Cu2O/PVDF DLHF membrane with 6 mL/min outer dope flowrate, which was able to remove 75% of 10 ppm BPA under visible light irradiation without copper leaching into the water sample.

Cellulose acetate in fabrication of polymeric membranes: A review

Developing biodegradable polymers to fabricate filtration membranes is one of the main challenges of membrane science and technology. Cellulose acetate (CA) membranes, due to their excellent film-forming property, high chemical and mechanical stability, high hydrophilicity, eco-friendly, and suitable cost, are extensively used in water and wastewater treatment, gas separation, and energy generation purposes. The CA is one of the first materials used to fabricate filtration membranes. However, in the last decade, the possibility of modification of CA to improve permeability and stability has attracted the researcher's attention again. This review is focused on the properties of cellulose derivatives and especially CA membranes in the fabrication of polymeric separation membranes in various applications such as filtration, gas separation, adsorption, and ion exchange membranes. Firstly, a brief introduction of CA properties and used molecular weights in the fabrication of membranes will be presented. After that, different configurations of CA membranes will be outlined, and the performance of CA membranes in several applications and configurations as the main polymer and as an additive in the fabrication of other polymer-based membranes will be discussed.

Low-temperature sintering of silicon carbide membrane supports from disks to single- and 19-channel tubes

As the configuration of asymmetric ceramic membranes is determined by the membrane supports, a low temperature sintering process was developed to prepare ceramic membrane supports from disks to single- and 19-channel tubes. The residual of NaA zeolite was introduced into the silicon carbide (SiC) matrix, and porous SiC membrane supports were successfully prepared at 1100 °C. Compared with the disk-like support, the open porosity, average pore size and pure water permeance of the single-channel supports obviously increased, and their bending strength decreased accordingly. These differences were mainly attributed to the incorporation of organic plasticizer and the change in molding process. Notably, the pure water permeance of disks, single- and 19-channel tubes was 70 ± 3, 74 ± 4 and 22 ± 1 m3·m−2·h−1·bar−1, respectively, which was much higher than the previously reported values. Therefore, this work provides important guides to develop of new generation ceramic membranes for practical application.