Conductivity Measurements Research Articles

Design, characterizations, DFT, molecular docking and antibacterial studies of some complexes derived from 4-aminpantipyrine with glycine amino acid and ligand

The synthesis of the heterocyclic ligand (LK) involved the combination of 4-amino antipyrine, 4-nitroacetophenone, and glycine. A new series of transition metal complexes of Ni(II), Co(II), Cu(II), and Zn(II) have been synthesized from the Schiff base (LK). It was characterized by micro elemental analysis, FT-IR, UV-Vis, and 1H-NMR spectroscopy. The prepared complexes were characterized using (CHN) analysis, flame atomic absorption, as well as conductivity measurements and magnetic susceptibility. From the obtained data, the octahedral structure was suggested for all complexes. The ligand showed tridentate nature by binding to metal ions through the N atom of antipyrine and the N,O atom of glycine. The exhibited excellent electrolytic properties, except for the Cu(II) and Zn(II) complex which exhibited non-electrolytic behavior. Theoretical calculations with DFT were conducted for all complexes. The antibacterial activity of the ligand and its complexes against (S. aureus, B. subtilis) was evaluated through the disc diffusion method. Additionally, molecular docking analysis was conducted to gain more insights into the ligand's binding energy and interaction with the S. aureus receptor. KEY WORDS: 4-Amino antipyrine, Heterocyclic ligand, Glycine, Molecular docking Bull. Chem. Soc. Ethiop. 2024, 38(6), 1609-1624. DOI: https://dx.doi.org/10.4314/bcse.v38i6.9

Space charge effects in mixed ionic-electronic conducting electrodes for solid-state batteries.

Mixed ionic-electronic conductors are widely used as electroactive materials in energy applications. The contact of a mixed conductor with another phase plays a crucial role in charge storage and transport in energy devices. However, the interfacial chemistry at the heterojunctions comprising mixed conductors and its interplay with the bulk chemistry remains imperative yet inadequately understood. This study addresses the fundamentals of space charge effects by exploring the equilibrium situations for contacts consisting of mixed conductors. From the perspective of defect chemistry, and by unifying the bulk and interfacial conditions with the electrochemical potential, our treatment allows for predicting the built-in potential at heterojunctions, profiling the space charge distributions, and evaluating the resulting interfacial charge storage and transport. The treatment can be related to experimental characterization, including coulometric titration, conductivity, and capacitance measurements at electrochemical interfaces in all-solid-state batteries. Besides, our treatment also highlights the significance of size and doping effects in nanocrystalline electrodes. This work provides a comprehensive framework for understanding and engineering the heterojunctions in electrochemical devices.

Novel Cu(II) and Zn(II) Nanocomplexes Based on 5,6‐Diphenyl‐1,2,4‐Triazine: Preparation, Spectroscopic, TD‐DFT Calculations, Molecular Docking and Solvatochromic Studies

ABSTRACTThe reaction between 2‐hydroxy‐1‐naphthaldehyde and 3‐hydrazino‐5,6‐diphenyl‐1,2,4‐triazine produced a novel hydrazone ligand (DTHMN), which reacted with Cu(II) and Zn(II) metal ion in molar ratio 1:1, giving octahedral Cu(II)‐DTHMN and tetrahedral Zn(II)‐DTHMN nanosized complexes. The structural geometries have been elucidated on the basis of elemental analysis, nuclear magnetic resonance, infrared, electronic, and electron spin resonance spectra, and magnetic and molar conductance measurements as well as x‐ray diffraction and thermal analysis. TEM analysis showed that Zn(II)‐DTHMN complex has nano‐rode morphology shape. On the other hand, Cu(II)‐DTHMN has sphere shape within nanodomain. The DTHMN ligand exhibits ONN chelating sites through N‐triazine ring, azomethine nitrogen, and deprotonated OH group, forming the mononuclear metal complexes. The synthesized compounds showed a distinct solvatochromic behavior in different polar solvents. A bathochromic alteration is observed when moving from less to high polar solvents, indicating strong solute–solvent interactions accompanied by intramolecular charge transfer (ICT). The ground and excited state dipole moments of these compounds were determined experimentally by solvatochromic shift method using Bilot–Kawski, Lippert–Mataga, Bakhshiev, and Kawski–Chamma–Viallet functions and a microscopic Reichardt's solvent polarity parameter (ETN). The dipole moment is increased significantly upon excitation referring to stabilizing the excited species includes n–π* transition by polarity of solvent. The experimental results are generally consistent with those values obtained by B3LYP/GENECP method at 6‐311G(d,p) basis set for C, H, N, and O atoms and SDD (Stuttgart/Dresden) basis set for the metal atoms. The compounds were tested for antimicrobial efficiency against Gram‐positive bacteria, Gram‐negative bacteria, and fungus strain. Finally, molecular docking was used to study the interactions between donors (the current compounds) and receptors FabH–CoA complex (PDB code: 1HNJ).

Zeta Potentials of Cotton Membranes in Acetonitrile Solutions.

Solid surfaces in contact with nonaqueous solvents play a key role in electrochemistry, analytical chemistry, and industrial chemistry. In this work, the zeta potentials of cotton membranes in acetonitrile solutions were determined by streaming potential and bulk conductivity measurements. By applying the Gouy-Chapman theory and the Langmuir adsorption isotherm of ions to the experimental data, the mechanism of the electrification at the cotton/acetonitrile interface is revealed for the first time to be solely due to ion adsorption on the surface, rather than proton dissociation at the interface. Different salts were found to produce opposite signs of the zeta potentials. This behavior can be attributed to ion solvation effects and the strong ordering of acetonitrile molecules at the interface. Furthermore, a trend of the electroviscous effect was observed, in agreement with the standard electrokinetic theory. These findings demonstrate that electrokinetics in acetonitrile, a polar aprotic solvent, can be treated in the same manner as in water.

Surface engineered novel cationic surfactants with enhanced surface adsorption for environmental applications

Gemini Cationic Surfactants (GCS) have garnered significant attention due to their distinctive molecular structure, featuring two hydrophilic head groups associated with a hydrophobic spacer. This distinctive configuration enables diverse applications across various fields. Hence, the current study introduces a novel series of GCSs, ethanediyl-1,2-bis[di(2-hydroxypropyl) alkylammonium] dibromide (Cn-C2-Cn[IsoPr(OH)2; n = 9, 12 and 14) and comprehensively explore their properties, highlighting their promising antimicrobial activity. The synthesis of GCSs was validated using 1H NMR and IR spectroscopy. Dynamic Light Scattering was employed to determine the dimensions of Gemini surfactant aggregates in aqueous solutions. Surface tension analysis determined critical concentrations of micelle (CMC), minimum surface area (Amin) and concentration of surface excess (Γmax). Physicochemical properties were assessed through conductivity and surface tension analyses in aqueous solutions. The CMC, Amin and Γmax values decrease as alkyl chain length extends. Surface tension data revealed strong adsorption of GCSs at interfaces. π values (mN/m) ranged from 36.7 (C14C2C14[Iso-Pr(OH)]2) to 45.3 (C9C2C9[Iso-Pr(OH)]2). Conductivity and surface tension measurements further characterized Gemini surfactants in aqueous environments at 298 K. The size of the micelle aggregates varied between C9C2C9[Iso-Pr(OH)]2 (1.2885 nm) and C14C2C14[Iso-Pr(OH)]2 (1.9210 nm), highlighting the impact of chain length on micelle size. Hence, the study highlights significant effect of the chain lengths on Gemini cationic surfactants’ self-assembly in dilute aqueous environments. Antimicrobial tests demonstrated significant activity of Cn-C2-Cn[IsoPr(OH)]2 GCSs at varying concentrations. Antimicrobial tests showed the significant antimicrobial potential of these GCS compounds, suggesting their potential and promising applications in medical, hygiene, environmental sanitation and advanced materials sectors.

Structure and Potential Application of Surfactant-Free Microemulsion Consisting of Heptanol, Ethanol and Water

Microemulsions, which are thermodynamically stable and isotropic mixtures of water, oil, and surfactants, attract significant research interest due to their unique physicochemical properties and diverse industrial applications. Traditional surfactant-based microemulsions (SBMEs) stabilize the interface between two typically immiscible liquids, forming various microstructures such as oil-in-water (O/W) droplets, water-in-oil (W/O) droplets, and bicontinuous phases. However, the use of surfactants poses environmental concerns, cost implications, and potential toxicity. Consequently, there is increasing interest in developing surfactant-free microemulsions (SFMEs) that offer similar benefits without the drawbacks associated with surfactants. In this study, we explore the formation and characteristics of a new surfactant-free microemulsion in a ternary system comprising water, ethanol, and heptanol. Advanced techniques are employed to characterize the microstructures and stability of surfactant-free microemulsions. These include electrical conductivity measurements, surface tension analysis, dynamic light scattering (DLS), and Fourier transform infrared spectroscopy (FTIR). These methods have been extensively used in previous research on surfactant-free microemulsions (SFMEs) to reveal the properties and interactions within microemulsion systems. The area of interest is identified using these techniques, where silica nanoparticles are subsequently synthesized and then visualized using transmission electron microscopy (TEM).

A time-resolved investigation at multiple-length scales of the structure of liquid foam stabilized by albumins from pea

HypothesisThe structural details of foams made with pea albumins are affected by the pH of the initial solution and followed heat treatment. ExperimentsAn in situ, time-resolved investigation of foams prepared with pea albumins was conducted using small-angle neutron scattering (SANS) in combination with imaging and conductance measurements. Solutions were tested at pH three pH values (3, 4.5, and 8) before and after heating (90 °C for 1 and 5 min). FindingsThe characteristic structures present in the foam from the nano to the meso-scale differed during drainage depending on solution pH. Foams obtained at pH 3, had the largest bubble radius and thinnest plateau border, as well as the highest extent of liquid drainage. At pH 4.5, close to the isoelectric point of the proteins, foams displayed similar bubbles’ behavior to those at pH 8, but with the largest film thickness. In this case, the proteins were extensively aggregated. Heating of the solutions prior to foaming did not significantly affect the foam aging regardless of pH. The quantification of specific surface areas and film thickness over time without sample disruption shows to be a powerful approach to designing foam structures.

Improved properties of glass vials for primary packaging with atomic layer deposition

Novel pharmaceuticals and drug delivery devices may require better performance from the packaging material e.g., in terms of extractables and leachables, and unwanted interactions. To address this, we applied atomic layer deposition (ALD) to build nanometer-range SiO2, ZrO2 and Al2O3-TiO2 films on primary packaging glass. Controlled modification of the surface also enabled creation of functionality without affecting visual appearance of the material. ALD-coated Type I borosilicate vials were compared to uncoated ones, and tailored functionality was presented by appropriate measurements. The tested ALD coatings formed a barrier on glass against extractables and leachables, from the vial and the coating alike. A good ALD coating prevents any leakage into the stored drug product. Hydrolytic resistance results improved by 85–92 %, and these results correlated well with straightforward water conductivity measurements. Opposite to uncoated borosilicate glass vials, no extracted elements could be detected from the extracts of the coated vials with stable ALD films. Improved surface integrity was observed with electron microscopy as well. ALD films increased hydrophilicity of the surface and tuning the ALD film thickness and composition allowed precise blocking of UV light wavelengths, without affecting transparency. As a conclusion, ALD is a versatile method to create barrier and functional films on primary packaging materials.

Novel α-N-heterocyclic thiosemicarbazone complexes: synthesis, characterization, and antimicrobial of properties investigation.

In this paper, eight novel α-N-heterocyclic thiosemicarbazone complexes were synthesized in search of new biologically active compounds, and characterized via organic elemental analysis, nuclear magnetic resonance spectroscopy, infrared spectra, thermogravimetric analysis, ultraviolet-visible spectroscopy, molar conductance and magnetic susceptibility measurements. The in vitro antimicrobial activity of these complexes was examined against ten disease-causing pathogens: Gram-positive bacteria (Micrococcus luteus ATCC9341, Staphylococcus epidermidis ATCC12228, Bacillus cereus RSKK863) and Gram-negative bacteria (Pseudomonas aeroginosa ATCC27853, Klebsiella pneumonia ATCC27853, Enterobacter aerogenes ATCC51342, Salmonella typhi H NCTC9018394, Shigella dysenteria NCTC2966, Proteus vulgaris RSKK96026) and yeast (Candida albicans Y-1200-NIH). The results revealed that the α-N-heterocyclic thiosemicarbazone compounds showed potent activity. It was observed that all thiosemicarbazone complexes were more susceptible to Gram-negative strains based on the presence of an electron-withdrawing substituent (-Br/-Cl/-F). It was determined that thiosemicarbazone Cu2+complexes showed stronger antifungal effects.

Coexistence of multiple magnetic interactions in oxygen-deficient V2O5 nanoparticles

This paper reports on the spin glass-like coexistence of competing magnetic orders in oxygen-deficient V2O5 nanoparticles with a broad size distribution. X-ray photoelectron spectroscopy yields the surface chemical stoichiometry of nearly V2O4.65 due to significant defect density. Temperature-dependent electrical conductivity and thermopower measurements demonstrate a polaronic conduction mechanism with a hopping energy of about 0.112 eV. The V2O5-δ sample exhibits strong field as well as temperature-dependent magnetic behaviour when measured with a SQUID magnetometer, showing positive magnetic susceptibility across the temperature range of 2-350 K. Field-cooled and zero-field-cooled data indicate hysteresis, suggesting glassy behaviour. The formation of small polarons due to oxygen vacancy defects, compensated by V4+ charge defects, results in Magneto-Electronic Phase Separation (MEPS) and various magnetic exchanges, as predicted by first-principle calculations. This is evidenced by the strong hybridisation of V orbitals in the vicinity of vacant oxygen site. An increase in V4+ defects shows an antiferromagnetic (AFM) component. The magnetic diversity in undoped V2O4.9 originates from defect density and their random distribution, leading to MEPS. This involves localised spins in polarons and ferromagnetic (FM) clusters on a paramagnetic (PM) background, while V4+ dimers induce AFM interactions. Electron paramagnetic resonance spectra measured at different temperatures indicate a dominant paramagnetic signal at a g-value of 1.97 due to oxygen defects, with a broad FM resonance-like hump. Both signals diminish with increasing temperature. Neutron diffraction data rules out long-range magnetic ordering, reflecting the composition as V2O4.886. Despite the FM hysteresis, no long-range order is observed in neutron diffraction data, consistent with the polaron cluster-like FM with MEPS nature. This detailed study shall advance the understanding of the diverse magnetic behaviour observed in undoped non-magnetic systems.

Interplay between disorder and electronic correlations in compositionally complex alloys

Owing to their exceptional mechanical, electronic, and phononic transport properties, compositionally complex alloys, including high-entropy alloys, represent an important class of materials. However, the interplay between chemical disorder and electronic correlations, and its influence on electronic structure-derived properties, remains largely unexplored. This is addressed for the archetypal CrMnFeCoNi alloy using resonant and valence band photoemission spectroscopy, electrical resistivity, and optical conductivity measurements, complemented by linear response calculations based on density functional theory. Utilizing dynamical mean-field theory, correlation signatures and damping in the spectra are identified, highlighting the significance of many-body effects, particularly in states distant from the Fermi edge. Electronic transport remains dominated by disorder and potentially short-range order, especially at low temperatures, while visible-spectrum optical conductivity and high-temperature transport are influenced by short quasiparticle lifetimes. These findings improve our understanding of element-specific electronic correlations in compositionally complex alloys and facilitate the development of advanced materials with tailored electronic properties.

Structural and electronic transformations in TiO2 induced by electric current

In-situ diffuse neutron scattering experiments revealed that when electric current is passed through single crystals of rutile TiO2 under conditions conducive to flash sintering, it induces the formation of parallel planes of oxygen vacancies. Specifically, a current perpendicular to the c-axis generates planes normal to the (132) reciprocal lattice vector, whereas currents aligned with the c-axis form planes normal to the (132) and to the (225) vector. The concentration of defects increases with incresing current. The structural modifications are linked to the appearance of signatures of interacting Ti3+ moments in magnetic susceptibility, signifying a structural collapse around the vacancy planes. Electrical conductivity measurements of the modified material reveal several electronic transitions between semiconducting states (via a metal-like intermediate state) with the smallest gap being 27 meV. Pristine TiO2 can be restored by heating followed by slow cooling in air. Our work suggests a novel paradigm for achieving switching of electrical conductivity related to the flash phenomenon.

Electrical conductivity model for reactive porous media under partially saturated conditions with hysteresis effects

The electrical conductivity of a porous medium is strongly controlled by the structure of the medium at the microscale as the pore configuration governs the distribution of the conductive fluid. The pore structure thus plays a key role since different geometries translate in variations of the fluid distribution, causing different behaviors measurable at the macroscale. In this study, we present a new physically-based analytical model derived under the assumption that the pore structure can be represented by a bundle of tortuous capillary tubes with periodic variations of their radius and a fractal distribution of pore sizes. By upscaling the microscale properties of the porous medium, we obtain expressions to estimate the total and relative electrical conductivity. The proposed pore geometry allows us to include the hysteresis phenomenon in the electrical conductivity estimates. The variations on these estimates caused by pore structure changes due to reactive processes are accounted by assuming a uniform dissolution of the pores. Under this hypothesis, we describe the evolution of the electrical conductivity during reactive processes. The expressions of the proposed model have been tested with published data from different soil textures, showing a satisfactory agreement with the experimental data. Hysteretic behavior and mineral dissolution are also successfully addressed. By including hysteresis and mineral dissolution/precipitation in the estimates of the electrical conductivity, this new analytical model presents an improvement as it relates those macroscopic physical phenomena to its origins at the microscale. This opens up exciting possibilities for studies involving electrical conductivity measurements to monitor water movement, and hysteretic and reactive processes in porous media.

Surface Heterogeneity at the Polymer-Food Interface Influences Ag Migration from Plastic Packaging Incorporating Ag-Exchanged Zeolites.

Silver-enabled polymers, with their antimicrobial properties, could prolong the shelf life and maintain quality in packaged foods. However, there is limited understanding about how the Ag form in the polymer, food chemistry, and other factors affect the transfer (migration) of Ag from the polymer to the food under the intended conditions of use. In this study, we investigated the release of Ag from polymer composites (PCs) incorporating two different Ag-exchanged zeolites (Ag-Y), which have been explored as potential scaffolds for loading high concentrations of Ag within common polymers. We manufactured two Ag-Y films based on low-density polyethylene (LDPE): one incorporating ionic Ag (Ag+) and one incorporating nanoparticulate Ag (AgNPs), each with similar initial Ag concentrations. Then, we assessed the migration of Ag out of these PCs into food simulants under accelerated room temperature storage conditions. In all simulants investigated, the Ag+-Y/LDPE film exhibited a higher migration of Ag compared to the AgNP-Y/LDPE film, suggesting a lower fraction of readily releasable Ag in the latter material. Total Ag migration from AgNP-Y/LDPE over 10 days at 40 °C was 11.10 ± 2.05 ng cm-2 of packaging surface area in water, 7.63 ± 1.59 ng cm-2 in a 9 wt % aqueous sucrose solution, and 21.29 ± 1.98 ng cm-2 in a commercial sweetened carbonated beverage (Squirt). In contrast, Ag migration from Ag+-Y/LDPE was measured at 49.61 ± 3.46, 57.48 ± 9.65, and 91.54 ± 5.58 ng cm-2 in water, sucrose solution, and Squirt drink, respectively. Surface characterization techniques, including atomic force microscopy (AFM), scanning electron microscopy (SEM), and conductivity measurements, revealed the presence of exposed zeolite particles at the surface of the films, suggesting that direct interactions between Ag-exchanged zeolites and food components at the simulant-polymer interface play an important role in determining Ag migration from Ag-Y/LDPE PCs.

Quantitative insights into the mechanism of proton conduction and selectivity for the human voltage-gated proton channel Hv1

Human voltage-gated proton (hHv1) channels are crucial for regulating essential biological processes such as immune cell respiratory burst, sperm capacitation, and cancer cell migration. Despite the significant concentration difference between protons and other ions in physiological conditions, hHv1 demonstrates remarkable proton selectivity. Our calculations of single-proton, cation, and anion permeation free energy profiles quantitatively demonstrate that the proton selectivity of the wild-type channel originates from its strong proton affinity via the titration of the key residues D112 and D174, although the channel imposes similar kinetic blocking effects for protons compared to other ions. A two-proton knock-on model is proposed to mathematically explain the electrophysiological measurements of the pH-dependent proton conductance in the conductive state. Moreover, it is shown that the anion selectivity of the D112N mutant channel is tied to impaired proton transport and substantial anion leakage.

Functional conductivity imaging: quantitative mapping of brain activity.

Theory and modelling suggest that detection of neuronal activity may be feasible using phase sensitive MRI methods. Successful detection of neuronal activity both in vitro and in vivo has been described while others have reported negative results. Magnetic resonance electrical properties tomography may be a route by which signal changes can be identified. Here, we report successful and repeatable detection at 3 Tesla of human brain activation in response to visual and somatosensory stimuli using a functional version of tissue conductivity imaging (funCI). This detects activation in both white and grey matter with apparent tissue conductivity changes of 0.1 S/m (17-20%, depending on the tissue baseline conductivity measure) allowing visualization of complete system circuitry. The degree of activation scales with the degree of the stimulus (duration or contrast). The conductivity response functions show a distinct timecourse from that of traditional fMRI haemodynamic (BOLD or Blood Oxygenation Level Dependent) response functions, peaking within milliseconds of stimulus cessation and returning to baseline within 3-4s. We demonstrate the utility of the funCI approach by showing robust activation of the lateral somatosensory circuitry on stimulation of an index finger, on stimulation of a big toe or of noxious (heat) stimulation of the face as well as activation of visual circuitry on visual stimulation in up to five different individuals. The sensitivity and repeatability of this approach provides further evidence that magnetic resonance imaging approaches can detect brain activation beyond changes in blood supply.

Electrical and piezoresistive properties of ultra-high toughness cementitious composite incorporating multi-walled carbon nanotubes: Testing, analyzing, and phenomenological modeling

This study explores the electrical and piezoresistive properties of ultra-high toughness cementitious composites (UHTCC) enhanced with multi-walled carbon nanotubes (MWCNTs) ranging from 0 to 1 wt% of cementitious binders. The observed polarization behavior is found to be analogous to the charging process of a capacitor. The polarization process and resistivity drift over time in the piezoresistive response are explained using an existing equivalent electrical circuit model incorporating a capacitor. The average results of electrical conductivity initially decrease and subsequently increase with higher MWCNTs concentrations, a phenomenon attributed to increased porosity and reduced matrix conductivity. The percolation threshold is identified at a volume fraction of 0.00387. Notably, even in the absence of MWCNTs, UHTCC materials exhibit piezoresistive properties due to the presence of metal impurities and ionic compounds. The insufficient polarization process results in an increasing trend in fractional change in resistance (FCR). The highest FCR sensitivity to external load occurs within the percolation threshold. Additionally, three equations are proposed to calculate electrical conductivity, incorporating the effects of interfaces, porosity, and matrix conductivity reduction, which align well with the experimental findings. These insights contribute to a deeper understanding of the electrical properties of UHTCC-MWCNTs composites, enabling more precise conductivity measurements and improved sensor sensitivity.

Novel nano-Y2O3/myristic acid nanocomposite PCM for cooling performances of electronic device with various fin designs

Effective thermal management is critical for enhancing the longevity and operational efficiency of electronic devices. This research introduces a novel cooling approach by incorporating Yttrium Oxide (Y2O3) nanoparticles into Phase Change Materials (PCMs) to improve thermal management in electronic devices. This study focuses on developing nanocomposite PCMs with Y2O3 nanoparticles embedded in a myristic acid (MA) matrix through melting and physical mixing. Nanoparticles were added to MA at various mass fractions: 0.5 %, 1 %, 1.5 %, and 2 %. Structural and morphological analyses were conducted using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and field emission scanning electron microscopy combined with energy dispersive X-ray spectroscopy (FE-SEM-EDX). Thermophysical properties were characterized using differential scanning calorimetry (DSC) and thermal conductivity measurements with the KD2-Pro device. The inclusion of Y2O3 nanoparticles significantly enhanced the thermal conductivity of the PCM, reaching up to 0.229 W/m·K in the solid phase and 0.177 W/m·K in the liquid phase, representing improvements of 43.125 % and 18 %, respectively, over the base PCM. The highest average specific heat capacity (Cp) values in the solid and liquid phases were 1.98 J/g·°C and 2.69 J/g·°C, respectively, for the 2 % nanoparticle-additive sample. DSC analysis indicated slight shifts in phase transition temperatures and a noticeable reduction in latent heat values, from 215 J/g to 202 J/g for solidification and from 209 J/g to 201 J/g for melting. Computational analysis using ANSYS-FLUENT software validated the enhanced thermal dissipation properties of the nanocomposite PCM. Additionally, an examination of fin configurations within the PCM containers revealed that rectangular fins provided superior cooling efficacy compared to trapezoidal ones. This study demonstrates that the development of nano- Y2O3 enhanced MA nanocomposite PCMs presents a promising avenue for applications in electronic device thermal management and thermal energy storage.

A New Numerically Improved Transient Technique for Measuring Thermal Properties of Anisotropic Materials

A new transient technique of the thermal conductivity and diffusivity measurement for anisotropic materials is presented and validated. It is based on measuring the through-plane properties using the extended dynamic plane source (EDPS) method and in-plane conductivity employing the transient plane source (TPS) and modified dynamic plane source (MDPS) methods. The key advantage of this technique is that only one pair of specimens is required for measurements. While the EDPS method is implemented on real measurements, the TPS and MDPS are applied to the finite elements method (FEM) simulation of the experiment. The accuracy of the results is enhanced by the application of the FEM and is better than 1% for materials with through-plane conductivity of less than 2 W m−1 K−1 and a specimen thickness of 9 mm.

Synthesis and Characterization of Coconut-Derived Graphene Nano Sheet (GNS) and Its Properties in Nickel/GNS and Zinc/GNS Hybrid Electrodes

This study introduces a sustainable method of producing a graphene nano sheet (GNS) from coconut shells and investigates its application in GNS, Ni/GNS, and Zn/GNS electrodes for advanced energy storage devices. The GNS was synthesized in a scalable manner using a pyrolysis and impregnation technique, with its successful synthesis verified by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and electrical conductivity measurement characterizations. The study highlights the enhanced performance of Zn/GNS electrodes, which outperform both pure GNS and Ni/GNS variants. This superior performance is attributed to the smaller particle size of Zn (mean = 2.356 µm) compared to Ni (mean = 3.09 µm) and Zn’s more favourable electron configuration for electron transfer. These findings demonstrate the potential of bio-derived GNS composites as efficient, high-performance electrodes, paving the way for more sustainable and cost-effective energy storage solutions.