Maximum Titer Research Articles

Development of laboratory regulations elements for the pesticide production of based on the entomopathogenic strain Bacillus thuringiensis 0271

The production of new entomocidal biologics based on Bacillus thuringiensis bacteria does not lose its relevance. In this regard, studies have been conducted on the individual elements development of the regulations for the production of biological insecticide. It has been shown that the liquid formulation obtained on nutrient media SG, PS and No. 9, without stabilizers, retains a spore titer of at least 1.2 billion/ml for 6 months. The culture of the strain B. thuringiensis 0271 obtained on nutrient media No. 7 and No. 9 is able to withstand heat treatment no higher than 70°C and no longer than 30 minutes. Simulation of fermentation conditions of strain B. thuringiensis 0271 made it possible to predict that the maximum spore titer can be achieved by maintaining a gas pressure of at least 0.7 air volume per medium volume per minute, increasing the temperature at the end of cultivation to 32°C, and a pH in the stationary phase of at least 8.0.

Extração e quantificação de anticorpos entivenenos em ovos de galinha contra veneno de escorpião

ABSTRACT: Avian-derived IgY is thought to be the best therapy for scorpion bites concerning low-level side effects. The present study analyzed a hypothesis about the neutralization of scorpion venom Androcotonus australis through antibodies produced in the egg yolks of chickens. The venom used for inoculation was obtained from Androctonus australis (yellow fat-tailed scorpion) from southern Punjab, Pakistan. The lethal dose of LD50 against scorpion venom was calculated in chickens and mice. Safe doses were given to egg-laying chickens to produce IgY antibodies. The antivenom IgY antibodies were extracted from the egg yolks of immunized chicken using the polyethylene glycol (PEG) method. Moreover, IgY was confirmed through sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and the Ouchterlony double immunodiffusion assay test. The antibody titers were evaluated by the enzyme-linked immunosorbent assay (ELISA). The neutralisation capacity of extracted anti-scorpion antibodies was tested on mice. The calculated LD50 of scorpion venom for chicken and mice was 4 mg/kg and 2.5 mg/kg, respectively. SDS-PAGE and Ouchterlony double immunodiffusion confirmed the presence of IgY against scorpion venom. The maximum titer value of specific IgY produced against scorpion venom was 3.5 ug/ml. A concentration of 220 ul/LD50 was effective to neutralize 1 mg of scorpion venom. It is suggested that IgY obtained from egg yolks is safe against targeted venom and can be used as an effective alternative to equine IgG antibodies against scorpion envenoming.

Optimizing Hexose Utilization Pathways of Cupriavidus necator for Improving Growth and L-Alanine Production under Heterotrophic and Autotrophic Conditions.

Cupriavidus necator is a versatile microbial chassis to produce high-value products. Blocking the poly-β-hydroxybutyrate synthesis pathway (encoded by the phaC1AB1 operon) can effectively enhance the production of C. necator, but usually decreases cell density in the stationary phase. To address this problem, we modified the hexose utilization pathways of C. necator in this study by implementing strategies such as blocking the Entner-Doudoroff pathway, completing the phosphopentose pathway by expressing the gnd gene (encoding 6-phosphogluconate dehydrogenase), and completing the Embden-Meyerhof-Parnas pathway by expressing the pfkA gene (encoding 6-phosphofructokinase). During heterotrophic fermentation, the OD600 of the phaC1AB1-knockout strain increased by 44.8% with pfkA gene expression alone, and by 93.1% with gnd and pfkA genes expressing simultaneously. During autotrophic fermentation, gnd and pfkA genes raised the OD600 of phaC1AB1-knockout strains by 19.4% and 12.0%, respectively. To explore the effect of the pfkA gene on the production of C. necator, an alanine-producing C. necator was constructed by expressing the NADPH-dependent L-alanine dehydrogenase, alanine exporter, and knocking out the phaC1AB1 operon. The alanine-producing strain had maximum alanine titer and yield of 784 mg/L and 11.0%, respectively. And these values were significantly improved to 998 mg/L and 13.4% by expressing the pfkA gene. The results indicate that completing the Embden-Meyerhof-Parnas pathway by expressing the pfkA gene is an effective method to improve the growth and production of C. necator.

Xylose and shikimate transporters facilitates microbial consortium as a chassis for benzylisoquinoline alkaloid production

Plant-sourced aromatic amino acid (AAA) derivatives are a vast group of compounds with broad applications. Here, we present the development of a yeast consortium for efficient production of (S)-norcoclaurine, the key precursor for benzylisoquinoline alkaloid biosynthesis. A xylose transporter enables the concurrent mixed-sugar utilization in Scheffersomyces stipitis, which plays a crucial role in enhancing the flux entering the highly regulated shikimate pathway located upstream of AAA biosynthesis. Two quinate permeases isolated from Aspergillus niger facilitates shikimate translocation to the co-cultured Saccharomyces cerevisiae that converts shikimate to (S)-norcoclaurine, resulting in the maximal titer (11.5 mg/L), nearly 110-fold higher than the titer reported for an S. cerevisiae monoculture. Our findings magnify the potential of microbial consortium platforms for the economical de novo synthesis of complex compounds, where pathway modularization and compartmentalization in distinct specialty strains enable effective fine-tuning of long biosynthetic pathways and diminish intermediate buildup, thereby leading to increases in production.

Pre-Clinical Safety and Immunogenicity Study of a Coronavirus Protein-Based Subunit Vaccine for COVID-19.

Creating an effective and safe vaccine is critical to fighting the coronavirus infection successfully. Several types of COVID-19 vaccines exist, including inactivated, live attenuated, recombinant, synthetic peptide, virus-like particle-based, DNA and mRNA-based, and sub-unit vaccines containing purified immunogenic viral proteins. However, the scale and speed at which COVID-19 is spreading demonstrate a global public demand for an effective prophylaxis that must be supplied more. The developed products promise a bright future for SARS-CoV-2 prevention; however, evidence of safety and immunogenicity is mandatory before any vaccine can be produced. In this paper, we report on the results of our work examining the safety, toxicity, immunizing dose choice, and immunogenicity of QazCoVac-P, a Kazakhstan-made sub-unit vaccine for COVID-19. First, we looked into the product's safety profile by assessing its pyrogenicity in vaccinated rabbit models and using the LAL (limulus amebocyte lysate) test. We examined the vaccine's acute and sub-chronic toxicity on BALB/c mice and rats. The vaccine did not cause clinically significant toxicity-related changes or symptoms in our toxicity experiments. Finally, we performed a double immunization of mice, ferrets, Syrian hamsters, and rhesus macaques (Macaca mulatta). We used ELISA to measure antibody titers with the maximum mean geometric titer of antibodies in the animals' blood sera totaling approximately 8 log2. The results of this and other studies warrant recommending the QazCoVac-P vaccine for clinical trials.

High titer (>100 g/L) ethanol production from pretreated corn stover hydrolysate by modified yeast strains

Developing a reliable lignocellulose pretreatment method to extract mixed sugars and engineering efficient strains capable of utilizing xylose are crucial for advancing cellulosic ethanol production. In this study, chemical and characterization analyses revealed that alkali cooking can significantly remove lignin from lignocellulose crops. The highest amount of mixed sugar was obtained from corn stover hydrolysates with a 15 % solid loading. Our genetically engineered yeast strain ΔsnR4, derived from a well-staged WXY70, demonstrated excellent performance in low 10 % solids loading corn stover hydrolysate, producing a high ethanol yield of 0.485 g/g total sugars. When a combined NaOH-ball milling pretreatment strategy was applied at high solids loading, ΔsnR4 exhibited the maximum ethanol titer of 110.9 g/L within 36 h, achieving an ethanol yield of 92.9 % theoretical maximum. Therefore, ΔsnR4 is highly compatible with high solid loading NaOH-ball milling pretreatment, making it a potential candidate for industrial cellulosic ethanol.

Effect of Anti-D titers in RhD-negative pregnant women on fetuses and newborns: A retrospective study

BackgroundTransplacental-derived anti-D IgG in RhD-negative pregnant women can trigger an immune response to Rh D-positive red cells in fetuses and newborns. We assessed the effect of anti-D titers in RhD-negative pregnant women on fetuses and newborns. MethodsThe clinical data of 142 singleton RhD-sensitized pregnancies were retrospectively collected. The pregnant women received routine prenatal care and the newborns had standard care. Based on the tertile categories of the pregnancies, the maximum titers of anti-D IgG in the pregnant women were divided into three groups ranging from low to high as follows: low-titer group (anti-D titer: 1:4–1:128, n = 57); medium-titer group (anti-D titer: 1:256–1:512, n = 50); and high-titer group (anti-D titer: 1:1024–1:4096, n = 35). ResultsThe frequencies of major neonatal complications did not significantly differ among the three groups. The high-titer group had the highest frequency of pregnancies requiring intrauterine transfusion (IUT) and number of IUTs among the three groups. The high-titer group had a significantly higher frequency of newborns treated with top-up transfusion, number of top-up transfusions, frequency of newborns treated with exchange transfusion (ET), and number of ETs when compared to the low-titer group. ConclusionHigher anti-D titers in RhD-negative pregnant women predict more severe fetal and neonatal hemolytic anemia. Increasing maternal anti-D titers results in an increased need for IUTs, and neonatal top-up transfusions and ETs. Methods for reducing titers of anti-D IgG in RhD-sensitized pregnant women warrants further investigation.

Production of poly (3-hydroxybutyrate) and extracellular polymeric substances from glycerol by the acidophile Acidiphilium cryptum.

Acidiphilium cryptum is an acidophilic, heterotrophic, and metallotolerant bacteria able to use dissolved oxygen or Fe(III) as an electron sink. The ability of this extremophile to accumulate poly(3-hydroxybutyrate) (PHB) and secrete extracellular polymeric substances (EPS) has also been reported. Hence, the aim of this work is to characterize the production of PHB and EPS by the wild strain DSM2389 using glycerol in shaken flasks and bioreactor. Results showed that maximum PHB accumulation (37-42% w/w) was obtained using glycerol concentrations of 9 and 15gL-1, where maximum dry cell weight titers reached 3.6 and 3.9gL-1, respectively. The culture in the bioreactor showed that PHB accumulation takes place under oxygen limitation, while the redox potential of the culture medium could be used for online monitoring of the PHB production. Recovered EPS was analyzed by Fourier-transform infrared spectroscopy and subjected to gas chromatography-mass spectrometry after cleavage and derivatization steps. These analyses showed the presence of sugars which were identified as mannose, rhamnose and glucose, in a proportion near to 3.2:2.3:1, respectively. Since glycerol had not been used in previous works, these findings suggest the potential of A. cryptum to produce biopolymers from this compound at a large scale with a low risk of microbial contamination due to the low pH of the fermentation process.

Microbial synthesis of the plant natural product precursor p-coumaric acid with Corynebacterium glutamicum

BackgroundPhenylpropanoids such as p-coumaric acid represent important precursors for the synthesis of a broad range of plant secondary metabolites including stilbenoids, flavonoids, and lignans, which are of pharmacological interest due to their health-promoting properties. Although extraction from plant material or chemical synthesis is possible, microbial synthesis of p-coumaric acid from glucose has the advantage of being less expensive and more resource efficient. In this study, Corynebacterium glutamicum was engineered for the production of the plant polyphenol precursor p-coumaric acid from glucose.ResultsHeterologous expression of the tyrosine ammonia-lyase encoding gene from Flavobacterium johnsoniae enabled the conversion of endogenously provided tyrosine to p-coumaric acid. Product consumption was avoided by abolishing essential reactions of the phenylpropanoid degradation pathway. Accumulation of anthranilate as a major byproduct was eliminated by reducing the activity of anthranilate synthase through targeted mutagenesis to avoid tryptophan auxotrophy. Subsequently, the carbon flux into the shikimate pathway was increased, phenylalanine biosynthesis was reduced, and phosphoenolpyruvate availability was improved to boost p-coumaric acid accumulation. A maximum titer of 661 mg/L p-coumaric acid (4 mM) in defined mineral medium was reached. Finally, the production strain was utilized in co-cultivations with a C. glutamicum strain previously engineered for the conversion of p-coumaric acid into the polyphenol resveratrol. These co-cultivations enabled the synthesis of 31.2 mg/L (0.14 mM) resveratrol from glucose without any p-coumaric acid supplementation.ConclusionsThe utilization of a heterologous tyrosine ammonia-lyase in combination with optimization of the shikimate pathway enabled the efficient production of p-coumaric acid with C. glutamicum. Reducing the carbon flux into the phenylalanine and tryptophan branches was the key to success along with the introduction of feedback-resistant enzyme variants.

Cellulase cocktail saccharification and fermentation of jackfruit waste for biobutanol production: Statistical optimization and techno‐economic analysis

AbstractJackfruit (Artocarpus heterophyllus Lam) waste (JFW), a lignocellulosic biomass, is a potential raw material that can be tapped to produce energy and valuable products for human use. In the present work, biobutanol production was studied using jackfruit waste. Initially, the jackfruit waste was pretreated using acid and alkaline agents and hydrolyzed to produce fermentable sugars. The hydrolyzed jackfruit waste was fermented using Clostridium acetobutylicum NCIM 2877 to produce biobutanol. Among the studied pretreatments, sulfuric acid pretreatment produced a maximum sugar yield of 84.21 ± 2.6 mggds−1 in the acid liquor. Enzyme hydrolysis of pretreated jackfruit waste produced a total glucose yield of 215.12 ± 13.44 mggds−1 after optimization. After detoxification using activated charcoal, the JFW hydrolysate produced a maximum biobutanol titer and yield of 1.60 ± 0.5 g L−1, and 106.59 ± 5.1 mg/gglucose, respectively. Central composite design optimization of acetone‐butanol‐ethanol fermentation produced a maximum biobutanol titer of 5.6 ± 0.2 g L−1 (250.00 ± 11.4 mg/gglucose) and total solvent titer of 7.28 ± 0.3 g L−1 (325.00 ± 13.1 mg/gglucose). A 31 ton annual biobutanol production from JFW, simulated using SuperPro Designer, revealed the unit production cost and payback time to be $10.49/kg and 8.94 years.

Screening non-conventional yeasts for acid tolerance and engineering Pichia occidentalis for production of muconic acid

Saccharomyces cerevisiae is a workhorse of industrial biotechnology owing to the organism’s prominence in alcohol fermentation and the suite of sophisticated genetic tools available to manipulate its metabolism. However, S. cerevisiae is not suited to overproduce many bulk bioproducts, as toxicity constrains production at high titers. Here, we employ a high-throughput assay to screen 108 publicly accessible yeast strains for tolerance to 20 g L−1 adipic acid (AA), a nylon precursor. We identify 15 tolerant yeasts and select Pichia occidentalis for production of cis,cis-muconic acid (CCM), the precursor to AA. By developing a genome editing toolkit for P. occidentalis, we demonstrate fed-batch production of CCM with a maximum titer (38.8 g L−1), yield (0.134 g g−1 glucose) and productivity (0.511 g L−1 h−1) that surpasses all metrics achieved using S. cerevisiae. This work brings us closer to the industrial bioproduction of AA and underscores the importance of host selection in bioprocessing.

Valorization of lignocellulosic wastes for sustainable xylanase production from locally isolated Bacillus subtilis exploited for xylooligosaccharides’ production with potential antimicrobial activity

The worldwide availability of lignocellulosic wastes represents a serious environmental challenge with potential opportunities. Xylanases are crucial in lignocellulosic bio-hydrolysis, but the low enzyme productivity and stability are still challenges. In the current study, Bacillus subtilis (coded ARSE2) revealed potent xylanase activity among other local isolates. The enzyme production optimization revealed that maximum enzyme production (490.58 U/mL) was achieved with 1% xylan, 1.4% peptone, and 5% NaCl at 30 °C and pH 9. Furthermore, several lignocellulosic wastes were exploited for sustainable xylanase production, where sugarcane bagasse (16%) under solid-state fermentation and woody sawdust (2%) under submerged fermentation supported the maximum enzyme titer of about 472.03 and 485.7 U/mL, respectively. The partially purified enzyme revealed two protein bands at 42 and 30 kDa. The partially purified enzyme revealed remarkable enzyme activity and stability at 50–60 °C and pH 8–9. The enzyme also revealed significant stability toward tween-80, urea, DTT, and EDTA with Vmax and Km values of 1481.5 U/mL and 0.187 mM, respectively. Additionally, the purified xylanase was applied for xylooligosaccharides production, which revealed significant antimicrobial activity toward Staphylococcus aureus with lower activity against Escherichia coli. Hence, the locally isolated Bacillus subtilis ARSE2 could fulfill the xylanase production requirements in terms of economic production at a high titer with promising enzyme characteristics. Additionally, the resultant xylooligosaccharides revealed a promising antimicrobial potential, which paves the way for other medical applications.

Implementation of Design of Experiment (DoE) for process development and optimization of biosimilars

Selection of a suitable basal media, feed, feeding strategy and glycan structures has a pivotal role during the process development and optimization of monoclonal antibodies. Instead of using one-factor-at-time approach or classical approach for media and feed selection, a DoE approach was implemented. A Simplex centroid mixture design was applied to identify the suitable media/media combinations by evaluating cell growth and productivity followed by a full factorial design for screening of the best suitable feed that enhanced the productivity. Optimization of the process was performed using Response surface methodology with central composite design to determine the optimum interaction between the selected media and feeds. Statistically designed experiments were performed to determine the factors influencing glycan. Uridine, MnCl2 and galactose were added as per the factorial design for evaluating their effect on modulating glycosylation. Prediction of the best combination was made with the maximum response titer by Design-Expert software 12.0. A threefold increase in titer (1909 mg/L) and significant improvement in glycosylation were obtained by statistical approach.

Expanding Pseudomonas taiwanensis VLB120's acyl-CoA portfolio: Propionate production in mineral salt medium.

As one of the main precursors, acetyl-CoA leads to the predominant production of even-chain products. From an industrial biotechnology perspective, extending the acyl-CoA portfolio of a cell factory is vital to producing industrial relevant odd-chain alcohols, acids, ketones and polyketides. The bioproduction of odd-chain molecules can be facilitated by incorporating propionyl-CoA into the metabolic network. The shortest pathway for propionyl-CoA production, which relies on succinyl-CoA catabolism encoded by the sleeping beauty mutase operon, was evaluated in Pseudomonas taiwanensis VLB120. A single genomic copy of the sleeping beauty mutase genes scpA, argK and scpB combined with the deletion of the methylcitrate synthase PVLB_08385 was sufficient to observe propionyl-CoA accumulation in this Pseudomonas. The chassis' capability for odd-chain product synthesis was assessed by expressing an acyl-CoA hydrolase, which enabled propionate synthesis. Three fed-batch strategies during bioreactor fermentations were benchmarked for propionate production, in which a maximal propionate titre of 2.8 g L-1 was achieved. Considering that the fermentations were carried out in mineral salt medium under aerobic conditions and that a single genome copy drove propionyl-CoA production, this result highlights the potential of Pseudomonas to produce propionyl-CoA derived, odd-chain products.

L-Lactic Acid Production via Sustainable Neutralizer-Free Route by Engineering Acid-Tolerant Yeast Pichia kudriavzevii.

l-Lactic acid (l-LA) is a platform chemical obtained via microbial fermentation at a near-neutral pH value. Large amounts of neutralizers are required during this process, which increases the production costs in downstream processing as well as environmental burden. To address this challenge, an acid-tolerant yeast Pichia kudriavzevii E1 was isolated and metabolically engineered to produce l-LA without neutralizers. The genome of strain E1 was sequenced and a CRISPR-Cas9 system was developed in this newly isolated strain. Subsequently, the gene encoding pyruvate decarboxylase (pdc) was knocked out to subdue ethanol formation. Furthermore, the l-lactate dehydrogenase gene from Weizmannia coagulans 2-6 and the codon-optimized L-ldhA gene from Bos taurus were introduced into P. kudriavzevii E1 chromosome to redirect the ethanol fermentation pathway to l-LA production. Deletion of the dld(chr3) gene further increased the optical purity of l-LA. After optimizing fermentation conditions, the maximum titer of l-LA in the 5 L fermenter reached 74.57 g/L without any neutralizers, with an optical purity of 100% and a maximum yield of 0.93 g/g glucose. This is the first report of optically pure l-LA production without neutralizers and the engineered acid-tolerant yeast paves the way for the sustainable production of l-LA via a green route.

Direct utilization and conversion of raw starch to exopolysaccharides by a newly isolated amylolytic Streptococcus sp.

A newly isolated culture is identified as Streptococcus lutetiensis with significant starch saccharifying activity. Along with considerable amylolytic property (∼ 2.71U/mL), the culture exhibited significant production of exopolysaccharide (EPS) in starch medium. Interestingly, the glycosyl transferase activity which is essential in the biosynthesis of polysaccharide is also detected in the culture and after screening and process optimization, a maximum EPS titre of 19.92±0.5g/L was obtained from cassava starch. The crude EPS, after purification and characterization (monosaccharide analysis, FT-IR, TGA, GPC NMR, and SEM) was found to be of dextran nature with a Mw of 1275.36kDa. Dextran type exopolysaccharide are synthesized by dextransucrase enzyme by the transfer of glucosyl residues from sucrose to dextran polymer. Interestingly, the glycosyl transferase enzyme activity which is essential in the biosynthesis of EPS is also detected in the culture. The particle size (447.8 dnm) and the zeta potential (-33.4) analysis of the purified EPS showed that the EPS produced is a stable molecule and has a random coil confirmation when exposed to alkaline condition with shear thinning property. One step conversion of sustainable low-cost starchy raw materials without adding external enzymes for hydrolysis, improved the economic viability of EPS production.

Isolation and characterization of emerging Mpox virus from India.

Mpox (previously known as Monkeypox) has recently re-emerged, primarily through human-to-human transmission in non-endemic countries including India. Virus isolation is still considered as the gold standard for diagnosis of viral infections. Here, the qPCR positive skin lesion sample from a patient was inoculated in Vero E6 cell monolayer. Characteristic cytopathic effectexhibiting typical cell rounding and detachment was observed at passage-02. The virus isolation was confirmed by qPCR. The replication kinetics of the isolate was determined that revealed maximum viral titre of log 6.3 PFU/mL at 72 h postinfection. Further, whole genome analysis through next generation sequencing revealed that the Mpox virus (MPXV) isolate is characterized by several unique SNPs and INDELs. Phylogenetically, it belonged to A.2 lineage of clade IIb, forming a close group with all other Indian MPXV along with few from USA, UK, Portugal, Thailand and Nigeria. This study reports the first successful isolation and phenotypic and genotypic characterization of MPXV from India.

Production of hydroxytyrosol through whole-cell bioconversion from L-DOPA using engineered Escherichia coli

Hydroxytyrosol (HT), a polyphenolic molecule of high value, is used in the nutraceutical, cosmetic, food, and livestock nutrition industries. As a natural product, HT is chemically manufactured or extracted from olives; nevertheless, the increasing demand mandates the exploration and development of alternative sources, such as heterologous production by recombinant bacteria. In order to achieve this purpose, we have molecularly modified Escherichia coli to carry two plasmids. For conversion of L-DOPA (Levodopa) into HT efficiently, it is necessary to enhance the expression of DODC (DOPA decarboxylase), ADH (alcohol dehydrogenases), MAO (Monoamine oxidase) and GDH (glucose dehydrogenases). The step that significantly affects the rate of ht biosynthesis is likely to be associated with the reaction facilitated by DODC enzymatic activity, as suggested by the result of in vitro catalytic experiment and HPLC. Then Pseudomonas putida, Sus scrofa, Homo sapiens and Levilactobacillus brevis DODC were taken into comparsion. The DODC from H. sapiens is superior to that of P. putida, S. scrofa or L. brevis for HT production. Seven promoters were introduced to increase the expression levels of catalase (CAT) to remove the byproduct H2O2 and optimized coexpression strains were obtained after screening. After the 10-hour operation, the optimized whole-cell biocatalyst produced HT at a maximum titer of 4.84 g/L with over 77.5% molar substrate conversion rate.

Biotechnological Production of Fumaric Acid by Rhizopus arrhizus—Reaching Industrially Relevant Final Titers

Fumaric acid is used in various areas of the chemical industry due to its functional groups. For example, it is used in the polymer industry to produce unsaturated polyester resins, which are nowadays mostly produced from fossil raw materials. With regard to sustainable biotechnological fumaric acid production, the main challenge is to develop a cost-effective and robust fermentation process with industrially relevant final titers, productivities and yields. For biotechnological fumaric acid production, mainly fungi of the genus Rhizopus are used, which require very complex and challenging morphology control. The aim of this work is the development of an effective biotechnological fumaric acid production process with R. arrhizus NRRL 1526. Significant insights into the morphology control of the fungus and optimization of production characteristics were obtained, and a final titer of 86.3 g/L fumaric acid was achieved in a batch cultivation, with a yield of 0.67 g/g and a productivity of 0.60 g/(L∙h). In addition, a fed-batch process was developed, in which the production phase was extended, and a maximum final titer of 195.4 g/L fumaric acid was achieved. According to current knowledge, this value is the highest final concentration of fumaric acid produced using biotechnology.

Efficient Production of Melanin by Aureobasidium Melanogenum Using a Simplified Medium and pH-Controlled Fermentation Strategy with the Cell Morphology Analysis.

Natural melanin is a biopolymer with wide application prospects in medicine, food, cosmetics, environmental protection, agriculture, and so on. Microbial fermentation is an important and effective way to produce melanin. In this study, Aureobasidium melanogenum, known as black yeast with cellular pleomorphism, was used for the production of melanin. Based on the characteristic of A. melanogenum secreting melanin under oligotrophic stress, a simple medium containing only glucose, MgSO4·7H2O, and KCl was constructed for the production of melanin. The melanin titer of 6.64 ± 0.22g/L was obtained after 20 days of fermentation without pH control. The cell morphological changes of A. melanogenum during the production of melanin were recorded, and the results showed that chlamydospore might be the most favorable cell morphology for melanin synthesis. Then, different fermentation strategies with cell morphology analysis were developed to further improve the production of melanin in a 5-L fermenter. Results showed that the maximum titer of melanin reached 18.50g/L by using the fermentation strategy integrating pH control, ammonium salt addition, and H2O2 stimulation, which increased by 178.6% than that of the strategy without pH control. Furthermore, the melanin obtained from the fermentation broth was characterized as eumelanin containing an indole structure. This study provided a potentially feasible fermentation strategy for the industrial production of melanin.