Ultraviolet Matrix-assisted Laser Research Articles

Transient Conformations Leading to Peptide Fragment Ion [c + 2H]+ via Intramolecular Hydrogen Bonding Using MALDI In-source Decay Mass Spectrometry of Serine-, Threonine-, and/or Cysteine-Containing Peptides

The formation of a peptide fragment ion [c + 2H]+ was examined using ultraviolet matrix-assisted laser desorption/ionization in-source decay mass spectrometry (UV/MALDI-ISD MS). Unusually, an ISD experiment with a hydrogen-abstracting oxidative matrix 4-nitro-1-naphthol (4,1-NNL) resulted in a [c + 2H]+ ion when the analyte peptides contained serine (Ser), threonine (Thr), and/or cysteine (Cys) residues, although the ISD with 4,1-NNL merely resulted in [a]+ and [d]+ ions. The [c + 2H]+ ion observed could be rationalized through intramolecular hydrogen atom transfer (HAT), like a Type-II reaction via a seven-membered conformation involving intramolecular hydrogen bonding (HB) between the active hydrogens (–OH and –SH) of the Ser/Thr/Cys residues and the backbone carbonyl oxygen at the adjacent amino (N)-terminal side residue. The ISD of the Cys-containing peptide resulted in the [c + 2H]+ ions, which originated from cleavage at the backbone N-Cα bonds far from the Cys residue, suggesting that the peptide molecule formed 16- and 22-membered transient conformations in the gas phase. The time-dependent density functional theory (TDDFT) calculations of the model structures of the Ser and Cys residues indicated that the Cys residue did not show a constructive bond interaction between the donor thiol (-SH) and carbonyl oxygen (=CO), while the Ser residue formed a distinct intramolecular HB.

Complete and selective nitration of tyrosine residue in peptides caused by ultraviolet matrix-assisted laser desorption/ionization.

Complete and highly selective nitration of tyrosine (Tyr) as a residue-specific modification in peptides was found without side reactions, using ultraviolet matrix-assisted laser desorption/ionization (UV-MALDI) with a nitroaromatic reagent 3, 5-dinitrosalicylic acid (3,5-DNSA). The tyrosine nitration supported two propositions, namely, the UV-induced. NO2 attack reaction mechanism by Long et al. and the C-NO2 homolysis as a thermal process by Wiik et al. and Furman et al. With the UV-MALDI of peptides, a residue-specific reaction was observed in glycine (Gly) residue, i.e., an oxidation of the alpha-carbon of Gly due to attack of hydroxyl radical (.OH).

Infrared MALDI Mass Spectrometry with Laser-Induced Postionization for Imaging of Bacterial Colonies.

Ultraviolet matrix-assisted laser desorption ionization mass spectrometry imaging (UV-MALDI-MSI) is a powerful tool to visualize bacterial metabolites in microbial colonies and in biofilms. However, a challenge for the method is the efficient extraction of analytes from deeper within the bacterial colonies and from the cytoplasm of individual cells during the matrix coating step. Here, we used a pulsed infrared (IR) laser of 2.94 μm wavelength to disrupt and ablate bacterial cells without a prior coating with a MALDI matrix. Instead, tissue water or, in some experiments, in addition a small amount of glycerol was exploited for the deposition of the IR laser energy and for supporting the ionization of the analytes. Compared to water, glycerol exhibits a lower vapor pressure, which prolonged the available measurement time window within an MSI experiment. Mass spectra were acquired with a hybrid Synapt G2-S HDMS instrument at a pixel size of 120 μm. A frequency-quadrupled q-switched Nd:YAG laser with 266 nm wavelength served for laser-induced postionization (MALDI-2). In this way, the ion abundances of numerous small molecules such as nucleobases, 2-alkyl-quinolones, a prominent class of Pseudomonas aeruginosa signaling molecules involved in one of the three quorum-sensing pathways, and also the signals of various bacterial phospholipids were boosted, partially by orders of magnitude. We analyzed single and cocultured colonies of Gram-negative P. aeruginosa and of Gram-positive Bacillus subtilis and Staphylococcus aureus as exemplary bacterial systems. To enable a rapid (within 5 s) MSI-compatible steam inactivation in a custom-made autoclave filled with hot water steam, bacterial cultures were grown on porous polyamide membranes. Compared to a UV-MALDI-2-MS measurement of the same systems, mass spectra with a reduced low mass background were generally generated. This resulted in the unequivocal detection of numerous metabolites only with the IR laser. In a fundamental part of our study, and to optimize the IR-MALDI-2 approach for the highest analytical sensitivity, we characterized the expansion dynamics of the particle plume as generated by the IR laser. Here, we recorded the total ion count and the intensities of selected signals registered from P. aeruginosa samples as a function of the interlaser delay and buffer gas pressure in the ion source. The data revealed that the IR-MALDI-2 ion signals are primarily generated from slow particles having mean velocities of ∼10 m/s. Interestingly, two different pressure/delay time regimes of the optimized ionization efficiency for phospholipids and smaller metabolites, respectively, were revealed, a result pointing to yet-unknown convoluted reaction cascades. The described IR-MALDI-2 method could be a helpful new tool for a microbial mass spectrometry imaging of small molecules requiring little sample preparation.

Fluorescence quantum yields of matrices used in ultraviolet matrix‐assisted laser desorption/ionization

Ultraviolet matrix-assisted laser desorption/ionization (MALDI) is among the most popular soft ionization methods in mass spectrometry. Several theoretical models have been proposed to explain the primary ion generation in MALDI. These models require knowledge of various matrix molecular parameters for simulation. One such parameter is the fluorescence quantum yield. However, the fluorescence quantum yield reported in previous studies remains controversial. In this study, we used a commercial and a homemade integrating sphere to measure the absorption and fluorescence quantum yields of several commonly used matrices, including 2,3-dihydroxybenzoic acid, 2,4-dihydroxybenzoic acid (2,4-DHB), 2,5-dihydroxybenzoic acid (2,5-DHB), 2,6-dihydroxybenzoic acid, 3,4-dihydroxybenzoic acid, 3,5-dihydroxybenzoic acid, α-cyano-4-hydroxycinnamic acid, 2,4,6-trihydroxyacetophenone, and ferulic acid. The fluorescence quantum yields of these matrices were determined to be low (<0.08) at low laser fluences and decreased as the laser fluence increased. The fluorescence quantum yields at the typical laser fluence for MALDI are below 0.04 (2,4-DHB and 2,5-DHB) and 0.01 (the other matrices). Shot-to-shot fluctuations of fluorescence intensity and absorption are not directly related to the fluctuation of ions. Possible mechanisms for the decrease in the fluorescence quantum yield as the laser fluence increased were discussed. The fluorescence quantum yields of these commonly used matrices are much lower than those reported in previous studies. Although fluorescence quantum yield is an important parameter and it is crucial to obtain an accurate value for theoretical models in simulations, the use of fluorescence quantum yield alone is not a sufficient parameter to justify these models.

Temperature Dependence of Desorbed Ions and Neutrals and Ionization Mechanism of Matrix-Assisted Laser Desorption/Ionization.

Two separate temperature-dependent experiments were performed to investigate the ionization mechanism of ultraviolet matrix-assisted laser desorption/ionization (UV-MALDI) of matrix 2,5-dihydroxybenzoic acid (2,5-DHB). First, the angular resolved intensity and velocity distributions of neutrals desorbed from the 2,5-DHB solid sample through UV laser (355 nm) pulse irradiation were measured using a rotating quadrupole mass spectrometer. Second, the desorbed neutrals, at an angle normal to the surface, and the desorbed ions were simultaneously detected for each laser shot using the quadrupole mass spectrometer and a time-of-flight mass spectrometer, respectively. Both experiments were conducted at two initial temperatures: 100 and 300 K. The measurements from these two experiments were used to calculate the initial temperature dependence of the ion-to-neutral ratio. The results closely agreed with the predictions of the temperature-dependent ion-to-neutral ratio using the thermal model, indicating that thermally induced proton transfer is the dominant reaction that generates initial ions of 2,5-DHB in UV-MALDI.

The Influence of MS Imaging Parameters on UV-MALDI Desorption and Ion Yield.

Ultraviolet matrix-assisted laser desorption/ionization mass spectrometry imaging (UV-MALDI MSI) is a widely used technique for imaging molecular distributions within biological systems. While much work exists concerning desorption in UV-MALDI MS, the effects of commonly varied parameters for imaging applications (repetition rate, use of continuous raster mode and raster speed), which determine spatial resolution and limits of detection for the technique, remain largely unknown. We use multiple surface characterization modalities to obtain quantitative measurements of material desorption and analyte ion yield in thin film model systems of two matrix compounds, arising from different UV-MALDI MSI sampling conditions. Observed changes in resulting ablation feature point to matrix-dependent spatial resolution and laser-induced matrix modification effects. Analyte ion yields of 10-9 to 10-6 are observed. Complex changes in ion yield, between spot and raster sampling and arising from varied laser repetition rate and raster speed, are observed. Graphical Abstract.

MALDI- and LDI-MS saponin fingerprint of leaves and stick components of commercial yerba mate (Ilex paraguariensis).

Yerba mate (YM) is massively produced and consumed as an infusion in South America and spreading all over the world. This product is obtained from dried leaves of Ilex paraguariensis Saint Hilaire, mixed with fragments of dried branches (sticks). For its commercialization, YM must have a minimum percentage of leaves because its presence determines YM quality and price. Till today, a mechanical methodology to determine the relative amount of components (sticks, leaves, and powder) is used. There is not any modern analytical method that provides information for quick characterization of the YM components. Typical saponin fingerprints for leaves and sticks were found by using ultraviolet matrix-assisted laser desorption ionization and ultraviolet laser desorption ionization mass spectrometry. Then, their possible application as useful tools for quick characterization of components of commercial YM (leaves and sticks) is presented. Furthermore, fingerprints obtained from authentic samples of Ilex paraguariensis and Ilex dumosa are also included and discussed. Each Ilex show typical saponin fingerprints for leaves and sticks.

Vacuum Ultraviolet Single-Photon Postionization of Amino Acids

In this study, ultraviolet (UV) laser desorption and vacuum UV single-photon (VUV SP) postionization were performed to ionize and successfully analyze 20 common amino acids. The analytical merit and efficiency of the ionization was compared with those of conventional UV matrix-assisted laser desorption ionization (UV-MALDI). A VUV light source (118 nm) was generated from the ninth harmonic of a Q-switched Nd:YAG laser, and the photon number was determined to be larger than 1012 for each laser pulse in the ionization region. In general, the detection sensitivity of VUV-SP-postionization was 10–100 times higher than that of conventional UV-MALDI. In particular, the ion signal from VUV-SP-postionization was considerably larger than that from UV-MALDI for analytes with low proton affinity such as glycine. However, some fragmentation of intact ions was observed in VUV-SP-postionization. Quantitative analysis performed using a glycine/histidine mixture and tryptophan/phenylalanine mixture revealed that the dynamic range of VUV-SP-postionization was one order of magnitude larger than that of UV-MALDI, indicating that VUV-SP-postionization is suitable for the quantitative analysis of amino acids.

Matrix Optical Absorption in UV-MALDI MS.

In ultraviolet matrix-assisted laser desorption/ionization mass spectrometry (UV-MALDI MS) matrix compound optical absorption governs the uptake of laser energy, which in turn has a strong influence on experimental results. Despite this, quantitative absorption measurements are lacking for most matrix compounds. Furthermore, despite the use of UV-MALDI MS to detect a vast range of compounds, investigations into the effects of laser energy have been primarily restricted to single classes of analytes. We report the absolute solid state absorption spectra of the matrix compounds α-cyano-4-hydroxycinnamic acid (CHCA), para-nitroaniline (PNA), 2-mercaptobenzothiazole (MBT), 2,5-dihydroxybenzoic acid (2,5-DHB), and 2,4,6-trihydroxyacetophenone (THAP). The desorption/ionization characteristics of these matrix compounds with respect to laser fluence was investigated using mixed systems of matrix with either angiotensin II, PC(34:1) lipid standard, or haloperidol, acting as representatives for typical classes of analyte encountered in UV-MALDI MS. The first absolute solid phase spectra for PNA, MBT, and THAP are reported; additionally, inconsistencies between previously published spectra for CHCA are resolved. In light of these findings, suggestions are made for experimental optimization with regards to matrix and laser wavelength selection. The relationship between matrix optical cross-section and wavelength-dependant threshold fluence, fluence of maximum ion yield, and R, a new descriptor for the change in ion intensity with fluence, are described. A matrix cross-section of 1.3 × 10-17 cm-2 was identified as a potential minimum for desorption/ionization of analytes. Graphical Abstract ᅟ.

The Coupled Chemical and Physical Dynamics Model of MALDI.

The coupled physical and chemical dynamics model of ultraviolet matrix-assisted laser desorption/ionization (MALDI) has reproduced and explained a wide variety of MALDI phenomena. The rationale behind and elements of the model are reviewed, including the photophysics, kinetics, and thermodynamics of primary and secondary reaction steps. Experimental results are compared with model predictions to illustrate the foundations of the model, coupling of ablation and ionization, differences between and commonalities of matrices, secondary charge transfer reactions, ionization in both polarities, fluence and concentration dependencies, and suppression and enhancement effects.

Response of the fungus Pseudocercospora griseola f. mesoamericana to Tricyclazole

Pseudocercospora griseola, an anamorph of Mycosphaerella, causes Angular Leaf Spot (ALS). The mycelia and conidia from P. griseola are coloured due to the synthesis of 1,8 dihydroxynaphthalene (DHN)-melanin. The aim of this work was to identify in P. griseola f. mesoamericana isolate T4, a highly pigmented fungus, intermediary compounds as a result of the inhibition of melanin synthesis by tricyclazole, and to analyze at the structural level the localization of these dark pigments. The main metabolites were analyzed using ultraviolet matrix-assisted laser desorption-ionization mass spectrometry (UV–MALDI MS). Tricyclazole affected P. griseola f. mesoamericana in several different ways. The most evident effect was the reduction of melanin synthesis, and therefore diffusible shunt products were found and identified. Flaviolin was the main intermediate metabolite found in cultures supplemented with tricyclazole. This inhibitor, which affected pigmentation and the cell wall structure of mycelium, revealed macroscopically by the reduction in growth, decreased the stratification and deposition of melanin in the hyphal wall. These results suggest a possible role of tricyclazole to control ALS.

Ultraviolet matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for phosphopeptide analysis with a solidified ionic liquid matrix.

A solidified ionic liquid matrix (SILM) consisting of 3-aminoquinoline, α-cyano-4- hydroxycinnamic acid and ammonium dihydrogen phosphate combines the benefits of liquid and solid MALDI matrices and proves to be well suitable for phosphopeptide analysis using MALDI-MS in the low femtomole range. Desalting and buffer exchange that typically follow after phosphopeptide elution from metal oxide affinity chromatography (MOAC) materials can be omitted. Shifting the pHfrom acidic to basic during target preparation causes slow matrix crystallization and homogeneous embedding of the analyte molecules, forming a uniform preparation from which (phospho)peptides can be ionized in high yields over long periods of time. The novel combination of MOAC-based phosphopeptide enrichment with SILM preparation has been developed with commercially available standard phosphopeptides and with α-casein as phosphorylated standard protein. The applicability of the streamlined phosphopeptide analysis procedure to cell biological and clinical samples has been tested (i) using affinity-enriched endogenous TRIM28 from cell cultures and (ii) by analysis of a two-dimensional gel-separated protein spot from a bladder cancer sample.

Bacillus subtilis subsp. subtilis CBMDC3f with antimicrobial activity against Gram-positive foodborne pathogenic bacteria: UV-MALDI-TOF MS analysis of its bioactive compounds.

In this work a new Bacillus sp. strain, isolated from honey, was characterized phylogenetically. Its antibacterial activity against three relevant foodborne pathogenic bacteria was studied; the main bioactive metabolites were analyzed using ultraviolet matrix assisted laser desorption-ionization mass spectrometry (UV-MALDI MS). Bacillus CBMDC3f was phylogenetically characterized as Bacillus subtilis subsp. subtilis after rRNA analysis of the 16S subunit and the gyrA gene (access codes Genbank JX120508 and JX120516, respectively). Its antibacterial potential was evaluated against Listeria monocytogenes (9 strains), B. cereus (3 strains) and Staphylococcus aureus ATCC29213. Its cell suspension and cell-free supernatant (CFS) exerted significant anti-Listeria and anti-S. aureus activities, while the lipopeptides fraction (LF) also showed anti-B. cereus effect. The UV-MALDI-MS analysis revealed surfactin, iturin and fengycin in the CFS, whereas surfactin predominated in the LF. The CFS from CBMDC3f contained surfactin, iturin and fengycin with four, two and four homologues per family, respectively, whereas four surfactin, one iturin and one fengycin homologues were identified in the LF. For some surfactin homologues, their UV-MALDI-TOF/TOF (MS/MS; Laser Induced Decomposition method, LID) spectra were also obtained. Mass spectrometry analysis contributed with relevant information about the type of lipopeptides that Bacillus strains can synthesize. From our results, surfactin would be the main metabolite responsible for the antibacterial effect.

One-step preparation of nitrogen doped titanium oxide/Au/reduced graphene oxide composite thin films for photocatalytic applications

Titanium dioxide (TiO2) and TiO2/Au/reduced graphene oxide nanocomposite thin films were grown by ultraviolet matrix assisted pulsed laser evaporation in controlled O2 or N2 atmospheres.

Compositional changes in cell wall polysaccharides from five sweet cherry (Prunus avium L.) cultivars during on-tree ripening.

Excessive softening is a major cause of postharvest deterioration during transportation and storage of fresh cherries. In continuing our studies to identify the factors determining the textural differences between sweet cherry fruit genotypes, we evaluated the solubilization, depolymerization, and monosaccharide composition of pectin and hemicelluloses from five sweet cherry cultivars ('Chelan', 'Sumele', 'Brooks', 'Sunburst', and 'Regina') with contrasting firmness and cracking susceptibility at two developmental stages (immature and ripe). In contrast to what is usually shown in most fruits, cherry softening could occur is some cultivars without marked increases in water-soluble pectin. Although polyuronide and hemicellulose depolymerization was observed in the water-soluble and dilute-alkali-soluble fractions, only moderate association occurs between initial polymer size and cultivar firmness. In all the genotypes the Na2CO3-soluble polysaccharides (NSF) represented the most abundant and dynamic wall fraction during ripening. Firm cultivars showed upon ripening a lower neutral sugars/uronic acid ratio in the NSF, suggesting that they have a lower proportion of highly branched polyuronides. The similar molar ratios of arabinose plus galactose to rhamnose [(Ara+Gal)/Rha] suggest that the cultivars differed in their relative proportion of homogalacturonan (HG) and rhamnogalacturonan I (RG-I) rather than in the size of the RG side chains; with greater proportions of HG in firmer cherries. Ultraviolet matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was useful to identify the depolymerization patterns of weakly bound pectins, but gave less accurate results on ionically bound pectins, and was unable to find any pattern on covalently bound pectins.

Excited state dynamics in the matrix-assisted laser desorption/ionization matrix 2,4,6-trihydroxyacetophenone: evidence for triplet pooling charge separation reactions.

Excited state pooling reactions are a central part of some models of ultraviolet matrix-assisted laser desorption/ionization (MALDI) mechanisms. Evidence has been found for pooling in several matrix materials, but a recent report of pure exponential fluorescence decay at MALDI-relevant laser fluences suggested that 2,4,6-trihydroxy-acetophenone (THAP) may be an example of a matrix in which pooling does not occur (Lin et al., Rapid Commun. Mass Spectrom. 2014, 28, 77). However, those data were instrumentally limited in dynamic range and signal/noise ratio, and the conclusion does not take into account several aspects of THAP excited state dynamics. Using time-correlated single photon counting, and absorption and emission spectroscopies, the excited state dynamics of THAP are reexamined. Like many other aromatic ketones and acetophenone, isolated THAP molecules undergo very efficient intersystem crossing. No fluorescence is observed in dilute solution. In the solid state, efficient fluorescence reappears, but is non-exponential even at very low excitation intensity. The solvent used for sample preparation was found to have a large effect on the spectra and decay curves. Needle-like crystals seem to be correlated with reduced intersystem crossing. THAP solid state fluorescence is entirely due to intermolecular interactions. Activation of fluorescence, instead of quenching, is a clear indicator of delocalized excited state phenomena in THAP. Contrary to the conclusions of Lin et al., the greatly increased singlet lifetime in the solid state substantially increases the probability that pooling-type reactions are indeed involved in ionization processes. The sensitivity of fluorescence and phosphorescence on sample morphology appears to reflect changes in intermolecular interactions due to crystal packing. Pooling charge separation pathways based on known triplet-triplet ionization reactions of aromatic ketones are proposed.

Quantitation of Heterogeneous Formulations of Morpholine-Type Fungicides and Surfactants in Polluted Soils

The paper reports ultraviolet matrix-assisted laser desorption/ionization mass spectroscopy (UVMALDI-MS) protocol for determination of complex heterogeneous emulsion or suspension formulations. The active agents and surfactants are morpholine fungicide fenpropimorph (1), amorolfine (2), tridemorph (mixture of 2,6-dimethyl-4-alkylmorpholins 3–6), 2,6-dimethyl-4-[2-methyl-3-(6-methyl-decahydro-naphthalen-2-yl)-propyl]-morpholine (7), dodemorph (8), main metabolite of 1 fenpropimorph acid (9), sodium dodecyl sulfate (10), and stearate (11). The full method and techniques validation as well as method performance parameters are discussed in terms of their maximal representativeness toward real environmental and foodstuff assay problems. These are additionally complicated by heterogeneous laterally, vertically, and time distribution of pesticide contaminants and their major metabolites in environmental samples. The real environmental heterogeneous distribution is elucidated, studying sterilized soil fractions with particle size 2.0 μm, clay content 11.5 %, silt 23.0 %, sand 8.1 %, and pH ∈ 6.0–8.1. A statistical sampling cluster approach is used. The method performance parameters are concentration LODs of 0.026 mg kg−1 (res. LOQs 0.08666 mg kg−1). Concentration linear dynamic ranges are ∈ 0.025–7.3 mg kg−1 (r2 = 0.99822 and 0.99421) and ∈ 2.3–7.4 mg kg−1 (level of confidence of 99.331 %) for complex spiked heterogeneous soil samples. The data illustrates the great capability of method and its promising application for environmental contamination monitoring and controlling programs for assessment.

Ion Intensity and Thermal Proton Transfer in Ultraviolet Matrix-Assisted Laser Desorption/Ionization

The ionization mechanism of ultraviolet matrix-assisted laser desorption/ionization (UV-MALDI) was investigated by measuring the total cation intensity (not including sodiated and potasiated ions) as a function of analyte concentration (arginine, histidine, and glycine) in a matrix of 2,4,6-trihydroxyacetophenone (THAP). The total ion intensity increased up to 55 times near the laser fluence threshold as the arginine concentration increased from 0% to 1%. The increases were small for histidine, and a minimal increase occurred for glycine. Time-resolved fluorescence intensity was employed to investigate how analytes affected the energy pooling of the matrix. No detectable energy pooling was observed for pure THAP and THAP/analyte mixtures. The results can be described by using a thermal proton transfer model, which suggested that thermally induced proton transfer is crucial in the primary ion generation in UV-MALDI.

Erratum to: Thermal Proton Transfer Reactions in Ultraviolet Matrix-Assisted Laser Desorption/Ionization

Erratum to: Thermal Proton Transfer Reactions in Ultraviolet Matrix-Assisted Laser Desorption/Ionization

Thermal Proton Transfer Reactions in Ultraviolet Matrix-Assisted Laser Desorption/Ionization

One of the reasons that thermally induced reactions are not considered a crucial mechanism in ultraviolet matrix-assisted laser desorption ionization (UV-MALDI) is the low ion-to-neutral ratios. Large ion-to-neutral ratios (10(-4)) have been used to justify the unimportance of thermally induced reactions in UV-MALDI. Recent experimental measurements have shown that the upper limit of the total ion-to-neutral ratio is approximately 10(-7) at a high laser fluence and less than 10(-7) at a low laser fluence. Therefore, reexamining the possible contributions of thermally induced reactions in MALDI may be worthwhile. In this study, the concept of polar fluid was employed to explain the generation of primary ions in MALDI. A simple model, namely thermal proton transfer, was used to estimate the ion-to-neutral ratios in MALDI. We demonstrated that the theoretical calculations of ion-to-neutral ratios exhibit the same trend and similar orders of magnitude compared with those of experimental measurements. Although thermal proton transfer may not generate all of the ions observed in MALDI, the calculations demonstrated that thermally induced reactions play a crucial role in UV-MALDI.