Materials For Regenerative Medicine Research Articles

Enhanced osteoblastogenesis in three-dimensional collagen gels.

Growth and differentiation of osteoblasts are often studied in cell cultures. In vivo, however, osteoblasts are embedded within a complex three-dimensional (3D) microenvironment, which bears little relation to standard culture flasks. Our study characterizes osteoblast-like cells cultured in 3D collagen gels and compares them with cells in two-dimensional (2D) cultures. Primary rat osteoblasts and MC3T3-E1 cells were seeded within type I collagen gels, and differentiation was determined by mineral staining and gene expression analysis. Cells growing in 3D gels showed positive mineral staining and induction of osteoblast marker genes earlier than cells growing in 2D. A number of genes, including osteocalcin, bone sialoprotein, alkaline phosphatase and dentin matrix protein 1, were already highly upregulated in 3D cultures 24 h after seeding. The early expression of osteoblast genes was dependent on the 3D structure and was not induced in cells growing on collagen-coated dishes in 2D. Comparison of thymidine incorporation between cells in 3D and 2D cultures treated with agents that induce proliferation-transforming growth factor β, platelet-derived growth factor and lactoferrin-showed a much greater response in 3D gels. Cells in 3D cultures were also much more sensitive to inhibition of proliferation by the protein kinase inhibitor imatinib mesylate. The 3D collagen gels better represent the physiological bone environment and offer a number of technical advantages for the study of osteoblasts in vitro. These studies have additional practical implications as 3D collagen gels are considered as a scaffold material in regenerative medicine for the repair of bone defects.

Regenerative medicine in urology

Repair and reconstruction of damaged tissues and organs has been a major issue in the medical field. Regenerative medicine and tissue engineering, as rapid evolving technologies, may offer alternative treatments and hope for patients with serious defects and end-stage diseases. Most urologic diseases could benefit from the development of regenerative medicine and tissue engineering. This article discusses the role of cells and materials in regenerative medicine, as well as the status of current role of regenerative medicine for the generation of specific urologic organs.

Tumor-suppressor effects of chemical functional groups in an in vitro co-culture system

Liver normal cells and cancer cells co-cultured on surfaces modified by different chemical functional groups, including mercapto (-SH), hydroxyl (-OH) and methyl (-CH3) groups. The results showed that different cells exhibited changes in response to different surfaces. Normal cells on -SH surface exhibited the smallest contact area with mostly rounded morphology, which led to the death of cancer cells, while cancer cells could not grow on -CH3 groups, which also died. In the co-culture system, the -CH3 group exhibited its unique effect that could trigger the death of cancer cells and had no effects on normal cells. Our findings provide useful information on strategies for the design of efficient and safe regenerative medicine materials.

Polyethlyene glycol microgels to deliver bioactive nerve growth factor.

Delivery of bioactive molecules is a critical step in fabricating materials for regenerative medicine, yet, this step is particularly challenging in hydrated scaffolds such as hydrogels. Although bulk photocrosslinked poly(ethylene glycol) (PEG) hydrogels have been used for a variety of tissue engineering applications, their capability as drug delivery scaffolds has been limited due to undesirable release profiles and reduction in bioactivity of molecules. To solve these problems, this article presents the fabrication of degradable PEG microgels, which are micron-sized spherical hydrogels, to deliver bioactive nerve growth factor (NGF). NGF release and activity was measured after encapsulation in microgels formed from either 3 kDa or 6 kDa PEG to determine the role of hydrogel mesh size on release. Microgels formed from 6 kDa PEG were statistically larger and had a higher swelling ratio than 3 kDa PEG. The 6 kDa PEG microgels provided a Fickian release with a reduced burst effect and 3 kDa microgels provided anomalous release over ≥20 days. Regardless of molecular weight of PEG, NGF bioactivity was not significantly reduced compared to unprocessed NGF. These results demonstrate that microgels provide easy mechanisms to control the release while retaining the activity of growth factors. As this microgel-based delivery system can be injected at the site of nerve injury to promote nerve repair, the potential to deliver active growth factors in a controlled manner may reduce healing time for neural tissue engineering applications.

Promise of Human Induced Pluripotent Stem Cells in Skin Regeneration and Investigation

Induced pluripotent stem cell (iPSC) technology has initiated a new era in biomedical science. The skin has been realized as an ideal platform for iPSC applications; unlike other organs, the skin is easily accessible, highly proliferative, and reconstitutable. Currently, skin equivalents can be generated from iPSCs not only from healthy individuals but also from patients with genodermatoses, providing novel platforms for dissecting disease pathophysiology and establishing cell-based therapy. With their developmental plasticity, iPSCs may also enable the regeneration of skin appendages. The iPSC technology may provide novel remedies for intractable disorders, once key issues particularly, safety concerns, are cleared.

Morphological Effects of HA on the Cell Compatibility of Electrospun HA/PLGA Composite Nanofiber Scaffolds

Tissue engineering is faced with an uphill challenge to design a platform with appropriate topography and suitable surface chemistry, which could encourage desired cellular activities and guide bone tissue regeneration. To develop such scaffolds, composite nanofiber scaffolds of nHA and sHA with PLGA were fabricated using electrospinning technique. nHA was synthesized using precipitation method, whereas sHA was purchased. The nHA and sHA were suspended in PLGA solution separately and electrospun at optimized electrospinning parameters. The composite nanofiber scaffolds were characterized by FE-SEM, EDX analysis, TEM, XRD analysis, FTIR, and X-ray photoelectron. The potential of the HA/PLGA composite nanofiber as bone scaffolds in terms of their bioactivity and biocompatibility was assessed by culturing the osteoblastic cells onto the composite nanofiber scaffolds. The results from in vitro studies revealed that the nHA/PLGA composite nanofiber scaffolds showed higher cellular adhesion, proliferation, and enhanced osteogenesis performance, along with increased Ca+2 ions release compared to the sHA/PLGA composite nanofiber scaffolds and pristine PLGA nanofiber scaffold. The results show that the structural dependent property of HA might affect its potential as bone scaffold and implantable materials in regenerative medicine and clinical tissue engineering.

The Curses and the Blesses of E-Cadherin

E-cadherin is an evolutionary conserved molecule expressing from lower level animal to human. The principal role of E-cadherin is to maintain appropriate cell-cell connectivity at adherensjunction. Besides its role as cell-cell connector protein, E-cadherin is integrally involved in intracellular signaling as well as cytoskeletal remodeling. Proper spaciotemporal regulations as well as relevant specialized functions of E-cadherin are important for maintaining normal embryogenesis, cellular morphology and physiological function. However, defects in the expression and function of this gene products could become curses since numerous genetic and developmental studies have identified the critical role of this gene in path physiological conditions of multiple types of cancers leading to fatality. Recent study identified essential role of this gene product in stem cell biology including normal embryogenesis, induced pluripotent stem cell (iPSC) generation and stem cell differentiation. Currently iPSC has become a prime choice as starting material for regenerative medicine to treat many diseases; however the relevant technology has many shortcomings. Our lab and others have been exploiting this protein for successful application in regenerative medicine that made it a blessed molecule. Here, based on the latest available information, we are concisely presenting these agonies and advantages of E-cadherin.

The Influence of Laser-Induced 3-D Titania Nanofibrous Platforms on Cell Behavior

The current challenge in tissue engineering is to design a platform that can provide appropriate topography and suitable surface chemistry to encourage desired cellular activities and to guide 3-D tissue regeneration. Compared with traditional cell culture materials, 3-D nanofibrous platforms offer a superior environment for promoting cell functions by mimicking the architecture of extracellular matrix (ECM). In this study, we present a technique to engineer freestanding 3-D titania nanofibrous structures on titanium substrates using femtosecond laser processing. The crystallinity, surface adhesion, and surface energy of the synthesized nanostructures are discussed. The effects of synthesized nanoarchitectures on the proliferation, morphology, and viability of MC3T3-E1 mouse osteoblast-like cells and NIH 3T3 mouse embryonic fibroblasts are investigated. The nanofibrous structures show high surface energy and hydrophilicity. The results from in vitro studies reveal that the titania nanofibrous architectures possess excellent biocompatibility and significantly enhances proliferation of both cell lines compared to untreated titanium specimens. Study of the cell morphology shows dynamic cell migration and attachment on the titania nanofibrous architecture. The bioactivity and biocompatibility of the engineered 3-D nanostructures suggest noticeable perspective for developing bio-functionalized scaffolds and implantable materials in regenerative medicine and clinical tissue engineering.

Functionalization of 3D scaffolds with protein-releasing biomaterials for intracellular delivery

Appropriate combinations of mechanical and biological stimuli are required to promote proper colonization of substrate materials in regenerative medicine. In this context, 3D scaffolds formed by compatible and biodegradable materials are under continuous development in an attempt to mimic the extracellular environment of mammalian cells. We have here explored how novel 3D porous scaffolds constructed by polylactic acid, polycaprolactone or chitosan can be decorated with bacterial inclusion bodies, submicron protein particles formed by releasable functional proteins. A simple dipping-based decoration method tested here specifically favors the penetration of the functional particles deeper than 300μm from the materials' surface. The functionalized surfaces support the intracellular delivery of biologically active proteins to up to more than 80% of the colonizing cells, a process that is slightly influenced by the chemical nature of the scaffold. The combination of 3D soft scaffolds and protein-based sustained release systems (Bioscaffolds) offers promise in the fabrication of bio-inspired hybrid matrices for multifactorial control of cell proliferation in tissue engineering under complex architectonic setting-ups.

Bacterial Cellulose Nanofibrillar Patch as a Wound Healing Platform of Tympanic Membrane Perforation

Bacterial cellulose (BC)-based biomaterials on medical device platforms have gained significant interest for tissue-engineered scaffolds or engraftment materials in regenerative medicine. In particular, BC has an ultrafine and highly pure nanofibril network structure and can be used as an efficient wound-healing platform since cell migration into a wound site is strongly meditated by the structural properties of the extracellular matrix. Here, the fabrication of a nanofibrillar patch by using BC and its application as a new wound-healing platform for traumatic tympanic membrane (TM) perforation is reported. TM perforation is a very common clinical problem worldwide and presents as conductive hearing loss and chronic perforations. The BC nanofibrillar patch can be synthesized from Gluconacetobacter xylinus; it is found that the patch contained a network of nanofibrils and is transparent. The thickness of the BC nanofibrillar patch is found to be approximately 10.33 ± 0.58 μm, and the tensile strength and Young's modulus of the BC nanofibrillar patch are 11.85 ± 2.43 and 11.90 ± 0.48 MPa, respectively, satisfying the requirements of an ideal wound-healing platform for TM regeneration. In vitro studies involving TM cells show that TM cell proliferation and migration are stimulated under the guidance of the BC nanofibrillar patch. In vivo animal studies demonstrate that the BC nanofibrillar patch promotes the rate of TM healing as well as aids in the recovery of TM function. These data demonstrate that the BC nanofibrillar patch is a useful wound-healing platform for TM perforation.

Functional aspects of the interaction between interleukin-8 and sulfated glycosaminoglycans

During the immune response, the cytokine interleukin 8 (IL-8, CXCL8) functions as a strong chemoattractant for polymorphonuclear leukocytes helping to direct these cells to infected/injured sites. This review focuses on the interaction of IL-8 with sulfated glycosaminoglycans expressed on cell surfaces and the extracellular matrix. This interaction contributes to the recruitment of polymorphonuclear cells from blood, penetration of these cells through the vessel wall, and their directed migration to inflammatory sites. Regulatory aspects of the interplay between IL-8 and heparan sulfate, the most abundant glycosaminoglycan, are highlighted. In this field, the large natural heterogeneity of glycosaminoglycans represents a great challenge that impedes the modeling of IL-8 functions. The interaction of IL-8 with newly developed artificial sulfated hyaluronan derivatives is also considered as these artificial substrates are an important tool for development of new materials in regenerative medicine.

Preferential emergence of cell types expressing markers for primitive endoderm lineages in mouse embryonic stem cells expressing exogenous EGAM1 homeoprotein

Embryonic stem (ES) cells have been considered as a valuable renewable source of materials in regenerative medicine. Recently, we identified the homeoprotein EGAM1 both in preimplantation mouse embryos and mouse ES cells. Expression of the Egam1 transcript and its encoded protein was detectable in differentiating mouse ES cells, while it was almost undetectable in undifferentiated cells. In the present study, in order to clarify the effect of forced expression of EGAM1 on the differentiation of mouse ES cells in vitro, transfectants expressing exogenous EGAM1 were generated. Egam1 transfectants promoted differentiation into cell types expressing Gata6, Gata4, Afp, or Plat, genes associated with emergence of the extra-embryonic endoderm lineages. On the other hand, Egam1 transfectants inhibited the expression of specific genes for the embryonic lineages, including Fgf5 (epiblast) and T (mesoderm), in addition to Cdx2, a specific gene for the extra-embryonic trophectoderm lineages. Changes in the percentage of cells recognizing by antibodies against specific marker proteins closely correlated with the expression patterns of their transcripts. Taken together, the results obtained in this study suggested that mouse ES cells expressing exogenous EGAM1 preferentially differentiate into extra-embryonic primitive endoderm lineages, rather than embryonic lineages or extra-embryonic trophectoderm lineages.

N-acetylcysteine protects induced pluripotent stem cells from in vitro stress: impact on differentiation outcome

Induced pluripotent stem cells (iPSCs) have the ability to differentiate towards various cell types of the adult organism and are a potential source of transplantable material in regenerative medicine. The entire process of conversion of iPSCs into terminally differentiated cells takes place in vitro and requires long periods of time. During in vitro culture, cells are exposed to environmental factors, which are capable of decreasing cellular performance and viability. Oxidative stress is the major underlying mechanism of such negative impact of in vitro environmental factors. We aimed to study the alteration of cellular properties during in vitro hematopoietic differentiation of human iPSCs and the ability of N-acetylcysteine (NAC), a potent free radical scavenger, to prevent such alterations. IPSCs were differentiated towards hematopoietic cells in the presence of 1 mM NAC. Intracellular reactive oxygen species (ROS), nitric oxide (NO), senescence, apoptosis and mitochondrial membrane potential (MMP) were evaluated at 1 and 3 weeks of differentiation. In the course of hematopoietic differentiation of iPSCs, cells progressively accumulated intracellular ROS and NO, increased the levels of apoptosis and senescence, and showed a decrease in mitochondrial functionality. NAC supplementation reversed all these phenomena. NAC administration also improved hematopoietic differentiation of iPSCs in terms of production of CD34, CD45 and CD43 positive cells. In conclusion, when supplemented during hematopoietic differentiation of iPSCs, NAC decreased oxidative stress, rescued the decline in cellular properties induced by long-term in vitro culture and promoted hematopoietic differentiation of iPSCs.

2D IR correlation analysis of chitosan-MMT nanocomposite system

Novel materials for regenerative medicine are usually composites or nanocomposites. Their main task is to stimulate damaged tissue for faster regeneration caused by enhanced activity of cells prone to intense proliferation within the defect area. One of the main requirements for such materials is bioactivity, which accelerates fixation between the material and surrounding tissue. After implanting into the body, bioactive materials create new physicochemical bonds between the material and the surrounding tissue. In their case apatite layers are formed on the implant surface without inducing growth of fibrous tissue around them.Some differences in bioactivity phenomena observed on the surface of materials depend on the mechanism of bonding and/or time required to create a new bonding and its strength. In the case of some polymers, especially with highly porous or fibrous structures, the bioactivity phenomenon is initiated by local increase in concentration of calcium and phosphate ions which become nuclei of apatite crystallization.The work presents time-dependent results of interactions between nanocomposite foils and simulation body fluid solution (SBF). Nanocomposite foils were produced from chitosan (CS) and montmorillonite (MMT). The obtained foils, CS and CSM (CS+MMT) were subjected to bioactivity tests by incubation in SBF for different time. FTIR measurements were carried out on an Excalibur spectrometer using ATR method in the wave number region from 550cm−1 to 4000cm−1. The reaction between foils and SBF was analyzed by 2D IR correlation spectroscopy The data obtained show local supersaturation of some characteristic groups in CS-MMT material which seems to be the result of apatite nucleation.

Polymers in Biomedicine and Electronics

The versatility of polymeric materials originates from the broad variety in their chemical structure and in their hierarchical organization as well as from the possibility to realize a wide spectrum of functions. Often such functions result from a combination ofamoleculararchitecture/morphology with a physical process and therefore require integration in a suitable system (e.g. medical device, electric circuit) or environment (e.g. physiological environment). Frequently, research in the area of functional polymers is motivated by applications. This special issue focuses on two application areas, in which polymer research as well as product development are progressing rapidly: Biomedicine and Electronics. Here (multi)functional polymers are an enabling technology and in this way create substantial and sustainable value. The significance of this topic is also highlighted at the conference ‘‘Polymers in Biomedicine and Electronics’’, which takes place from Oct 3 to 5, 2010 in Berlin combining the biannual meetings of the Gesellschaft Deutscher Chemiker (GDCh) Division ‘‘Macromolecular Chemistry’’ and of the Berlin-Brandenburgischer Verband fur Polymerforschung (BVP). Topics of the conference cover the design and the synthesis of functional polymers, physical principles underlying the function, the characterization of such functionswithin a system as well as product-oriented industrial research. Smart biomaterials, biocompatible coatings and their applications in controlled drug delivery systems or in regenerative therapies will be discussed in the biomedicine-oriented sessions of the conference. Photovoltaic, charge transport, light emission aswell as sensors andactuatorswill be subjects in the area of electronics.

Advances and Applications of Biodegradable Elastomers in Regenerative Medicine

AbstractWhen elastomers were first proposed as useful materials for regenerative medicine a few decades ago, their high versatility and suitability for a diverse and wide range of in vivo applications could not have been predicted. Due to their ability to recover after deformation, these materials were first introduced in tissue engineering in an attempt to mimic the mechanical properties of the extracellular matrix. Furthermore, elastomeric characteristics have been described as important criteria for cell interaction by modulating cellular behavior. From soft to hard tissues, elastomers have demonstrated degradation, mechanical, and biocompatibility requirements in accordance with the target tissue. In this feature article, biodegradable synthetic polyester elastomers that have been reported in the literature are discussed, with special focus on those that show promise for in vivo tissue replacement. Their satisfactory performance in vivo shows the promise of elastomers for use in regenerative medicine. However, further investigation is required to demonstrate the prospect of elastomer‐based therapies in clinical trials.

Introducing dip pen nanolithography as a tool for controlling stem cell behaviour: unlocking the potential of the next generation of smart materials in regenerative medicine.

Reproducible control of stem cell populations, regardless of their original source, is required for the true potential of these cells to be realised as medical therapies, cell biology research tools and in vitro assays. To date there is a lack of consistency in successful output when these cells are used in clinical trials and even simple in vitro experiments, due to cell and material variability. The successful combination of single chemistries in nanoarray format to control stem cell, or any cellular behaviour has not been previously reported. Here we report how homogenously nanopatterned chemically modified surfaces can be used to initiate a directed cellular response, particularly mesenchymal stem cell (MSC) differentiation, in a highly reproducible manner without the need for exogenous biological factors and heavily supplemented cell media. Successful acquisition of these data should lead to the optimisation of cell selective properties of materials, further enhancing the role of nanopatterned substrates in cell biology and regenerative medicine. The successful design and comparison of homogenously molecularly nanopatterned surfaces and their direct effect on human MSC adhesion and differentiation are reported in this paper. Planar gold surfaces were patterned by dip pen nanolithography (DPN) to produce arrays of nanodots with optimised fixed diameter of 70 nanometres separated by defined spacings, ranging from 140 to 1000 nm with terminal functionalities of simple chemistries including carboxyl, amino, methyl and hydroxyl. These nanopatterned surfaces exhibited unprecedented control of initial cell interactions and subsequent control of cell phenotype and offer significant potential for the future.

Dense fibrillar collagen matrices for tissue repair.

The preparation of dense fibrillar collagen matrices, through a sol/gel transition at variable concentrations, offers routes to produce a range of simple, non toxic materials. Concentrated hydrogels entrapping cells show enhanced properties in terms of reduced contraction and enhanced cell proliferation . Dense fibrillar matrices attain tissue like mechanical properties and show ultrastructures described in connective tissues, namely liquid crystalline cholesteric geometries. Their colonization by cells and possible association with a mineral phase in a tissue like manner validate their use as biomimetic materials for regenerative medicine.

Materials in Regenerative Medicine

V. Prasad Shastri is the Professor of Biofunctional Macromolecular Chemistry, the BIOSS Professor of Cell Signalling Microenvironments, and one of the core faculties of the BIOSS Excellence Cluster at the Albert-Ludwigs University of Freiburg, Germany. He is internationally recognized for his contributions in biodegradable polymers, bone and cartilage regeneration, and nanoscale engineering of surfaces for biomedical applications. He obtained his Doctoral Degree in Chemistry from the Polymer Science and Engineering Program at the Rensselaer Polytechnic Institute, Troy, New York, USA. He carried out his post-doctoral work in biomedical engineering with Prof. Robert Langer at the Massachusetts Institute of Technology, Cambridge, USA.

Expansion and Differentiation of Human Embryonic Stem Cells to Endoderm Progeny in a Microcarrier Stirred-Suspension Culture

Embryonic stem cells (ESCs) with their abilities for extensive proliferation and multi-lineage differentiation can serve as a renewable source of cellular material in regenerative medicine. However, the development of processes for large-scale generation of human ESCs (hESCs) or their progeny will be necessary before hESC-based therapies become a reality. We hypothesized that microcarrier stirred-suspension bioreactors characterized by scalability, straightforward operation, and tight control of the culture environment can be used for hESC culture and directed differentiation. Under appropriate conditions, the concentration of hESCs cultured in a microcarrier bioreactor increased 34- to 45-fold over 8 days. The cells retained the expression of pluripotency markers such as OCT3/4A, NANOG, and SSEA4, as assessed by quantitative PCR, immunocytochemistry, and flow cytometry. We further hypothesized that hESCs on microcarriers can be induced to definitive endoderm (DE) when incubated with physiologically relevant factors. In contrast to embryoid body cultures, all hESCs on microcarriers are exposed to soluble stimuli in the bulk medium facilitating efficient transition to DE. After reaching a peak concentration, hESCs in microcarrier cultures were incubated in medium containing activin A, Wnt3a, and low concentration of serum. More than 80% of differentiated hESCs coexpressed FOXA2 and SOX17 in addition to other DE markers, whereas the expression of non-DE genes was either absent or minimal. We also demonstrate that the hESC-to-DE induction in microcarrier cultures is scalable. Our findings support the use of microcarrier bioreactors for the generation of endoderm progeny from hESCs including pancreatic islets and liver cells in therapeutically useful quantities.