Main Mechanism Research Articles

Research on plasma modified fly ash denitration

The effects of reactor parameters and process parameters on the denitration rate of modified fly ash in different gas atmospheres were studied by using a dielectric barrier plasma reactor and using orthogonal experiments. The characteristics of modified fly ash were analyzed using scanning electron microscope, specific surface area analyzer, X-ray diffraction, Boehm titration and Fourier transform infrared spectroscopy. The experimental data were processed by variance analysis and linear regression to induce the denitration mechanism. R2 of the linear regression analysis model is 0.789, which means that the adsorption pore size, acid groups and basic group can explain 78.9% of the change in denitration rate. The basic group will have a significant positive impact on the denitration rate, and the adsorption pore size and acidic group will have a significant negative impact on the denitration rate. Through variance analysis of the experimental data, it was found that the input power and discharge gap have a significant effect on the denitration rate, but the ionization time and discharge length have no significant effect. The input power affects the denitration rate by impacting the basic group, and the discharge gap affects the denitration rate by influencing the adsorption pore size. There are three denitration mechanisms on the surface of fly ash: physical adsorption, chemical adsorption and absorption process. Among them, chemical adsorption is the main mechanism of action, accounting for approximately 60.86%.

Preparation of Chladophora‐Based Biochar and Its Adsorption Properties for Antibiotics

AbstractThe biochar prepared by Chladophora (CB) was used to adsorb the ibuprofen and ofloxacin in sewage. SEM showed that CB preserved the natural tubular structure and increased its specific surface area. According to the BET results, the specific surface area of CB was 296.831 m2 g‐1. The adsorption of ibuprofen and ofloxacin on biochar conformed to the pseudo second‐order kinetic model, indicating that their adsorption rate was controlled by the chemical adsorption mechanism. According to the adsorption isotherms study, the adsorption of ibuprofen on CB met the Dubin‐Radushkevich model, while it fitted well with the Freundlich model for ofloxacin adsorption, making their adsorption onto biochar relating to non‐uniform surface and adsorption layer, respectively. The pore filling and electrostatic interaction were considered the main mechanism for the adsorption of pharmaceuticals and personal care products on CB, whereas the π‐π electron donor acceptor (EDA) interaction and hydrogen bond would also partially contribute to the adsorption process.

Preparation of a novel polypyrrole/dolomite composite adsorbent for efficient removal of Cr(VI) from aqueous solution.

A novel adsorbent, deposited PPy on the DMI (PPy/DMI) composite, was successfully synthesized for Cr(VI) removal from aqueous solution. PPy/DMI composite was characterized by BET, SEM, TEM, XRD, and XPS. The SEM and TEM analyses revealed that DMI can greatly reduce the aggregation of PPy and significantly enhance its adsorption performance. The Cr(VI) removal was highly pH dependent. The high selectivity of PPy/DMI composite for Cr(VI) removal was found even in the presence of co-existing ions. The adsorption kinetic process followed the pseudo-second-order equation, demonstrating that the Cr(VI) adsorption behavior onto PPy/DMI is chemisorption. Furthermore, the intra-particle diffusion model implied that the adsorption was controlled by both liquid membrane diffusion and internal diffusion. The adsorption isotherm data fitted well with the Langmuir model with the maximum adsorption capacity (406.50 mg/g at 323 K) which was considerably higher than that of other PPy-based adsorbents. The Cr(VI) adsorption onto PPy/DMI composite was endothermic. The main mechanisms of Cr(VI) removal are involved in adsorption through electrostatic attractions, ion exchange, and in situ reduction. The results suggested that PPy/DMI composite could be a promising candidate for efficient Cr(VI) removal from aqueous solution.

Gut-Modulating Agents and Amyotrophic Lateral Sclerosis: Current Evidence and Future Perspectives.

Amyotrophic Lateral Sclerosis (ALS) is a highly fatal neurodegenerative disorder characterized by the progressive wasting and paralysis of voluntary muscle. Despite extensive research, the etiology of ALS remains elusive, and effective treatment options are limited. However, recent evidence implicates gut dysbiosis and gut-brain axis (GBA) dysfunction in ALS pathogenesis. Alterations to the composition and diversity of microbial communities within the gut flora have been consistently observed in ALS patients. These changes are often correlated with disease progression and patient outcome, suggesting that GBA modulation may have therapeutic potential. Indeed, targeting the gut microbiota has been shown to be neuroprotective in several animal models, alleviating motor symptoms and mitigating disease progression. However, the translation of these findings to human patients is challenging due to the complexity of ALS pathology and the varying diversity of gut microbiota. This review comprehensively summarizes the current literature on ALS-related gut dysbiosis, focusing on the implications of GBA dysfunction. It delineates three main mechanisms by which dysbiosis contributes to ALS pathology: compromised intestinal barrier integrity, metabolic dysfunction, and immune dysregulation. It also examines preclinical evidence on the therapeutic potential of gut-microbiota-modulating agents (categorized as prebiotics, probiotics, and postbiotics) in ALS.

Valorisation of Sub-Products from Pyrolysis of Carbon Fibre-Reinforced Plastic Waste: Catalytic Recovery of Chemicals from Liquid and Gas Phases.

Waste carbon fibre-reinforced plastics were recycled by pyrolysis followed by a thermo-catalytic treatment in order to achieve both fibre and resin recovery. The conventional pyrolysis of this waste produced unusable gas and hazardous liquid streams, which made necessary the treatment of the pyrolysis vapours. In this work, the vapours generated from pyrolysis were valorised thermochemically. The thermal treatment of the pyrolysis vapours was performed at 700 °C, 800 °C and 900 °C, and the catalytic treatment was tested at 700 °C and 800 °C with two Ni-based catalysts, one commercial and one homemade over a non-conventional olivine support. The catalysts were deeply characterised, and both had low surface area (99 m2/g and 4 m2/g, respectively) with low metal dispersion. The thermal treatment of the pyrolysis vapours at 900 °C produced high gas quantity (6.8 wt%) and quality (95.5 vol% syngas) along with lower liquid quantity (13.3 wt%) and low hazardous liquid (92.1 area% water). The Ni-olivine catalyst at the lowest temperature, 700 °C, allowed us to obtain good gas results (100% syngas), but the liquid was not as good (only 58.4 area% was water). On the other hand, the Ni commercial catalyst at 800 °C improved both the gas and liquid phases, producing 6.4 wt% of gas with 93 vol% of syngas and 13.6 wt% of liquid phase with a 97.5 area% of water. The main reaction mechanisms observed in the treatment of pyrolysis vapours were cracking, dry and wet reforming and the Boudouard reaction.

Pro-inflammatory Cytokines may Associate Periodontitis with Pregnancy Complications: A Short Review

Abstract: Periodontitis is an oral inflammatory disease possessing detrimental impacts on supporting tissue of teeth (like gingiva, periodontal ligament, and alveolar bone) and involves a great number of individuals all over the world. One of the appropriate ways to prevent this disease is to find related risk factors. According to reports, pregnancy complications can be associated with this oral disease; however, the possible mechanisms linking these two conditions have not been exactly determined. Hence, in this review, we summarize documents related to pregnancy complications and periodontitis with a mechanistic insight. : Literature on the relevant topic was searched from scientific databases, including Scopus, Google Scholar, and PubMed, in English, between 1996 and 2022. : 3Based on reports, pregnancy complications (premature labor, low weight at birth, and preeclampsia) can be related to periodontitis. This linkage can be mediated by inflammatory reactions, one of the main pathogenic mechanisms in periodontitis. Pro-inflammatory cytokines, such as TNF-α, IL-1β, and IL-6, have the ability to induce labor and fetal toxicity and finally create preterm labor and low weight at birth. Besides, these cytokines can potentiate chronic inflammatory responses in the fetal-maternal interface, impair placentation, and create endothelial dysfunction. : It seems that pro-inflammatory reactions, like secretion of TNF-α, IL-1β, and IL-6, can be a bridge for associating periodontitis and pregnancy complications. However, more studies with larger sample sizes are needed to support these findings.

Comparison of water-soluble organic matter (WSOM)-containing and WSOM-free biochars for simultaneous sorption of lead and cadmium

The effects of individual biochar constituents and natural environmental media on the immobilization behaviors and chemical activities of toxic heavy metals are still poorly understood. In this work, the physicochemical properties of raw corn straw (CS) and CS-derived biochar materials as well as their sorption abilities and retention mechanisms for lead (Pb) and cadmium (Cd) were evaluated by combining batch experiments and spectral approaches. According to the spectral analysis results and single variable principle, the setting of biochars after soaking in solution as the control group was suggested when evaluating their retention mechanisms for Pb and Cd. The rising of ionic strength did not apparently affect the immobilization of Pb by biochar prepared at 500 °C (i.e., CB500) and Pb/Cd by water-soluble organic matter (WSOM)-free CB500 (i.e., DCB500), while slightly inhibited the sorption of Cd by CB500. Pb and Cd exhibited a mutual inhibition effect on their sorption trends with a higher sorption preference of Pb. The dominant fixation mechanism of Pb by CB500 and DCB500 was identified to be mineral precipitation. In contrast, the main sorption mechanism of Cd changed from mineral precipitation in the single-metal system to surface complexation in the binary-metal system. The sorption ratios of Pb and Cd on CB500 were comparable to those on DCB500 with the coexistence of mixed natural organic matters (NOM) and ferrihydrite. The current experimental findings suggested that DCB500 was a suitable remediation agent for regulating the migration behaviors of toxic Pb and Cd in acidic and NOM-rich soil and water systems.

Methane pyrolysis for hydrogen production: Modeling of soot deposition by computational fluid dynamics and experimental validation

Methane pyrolysis is an attractive technology to reduce greenhouse gas emissions, since the carbonaceous part of the hydrocarbon is captured into a solid, easier to store than carbon dioxide. In this framework, computational fluid dynamics (CFD) is an excellent tool to simulate the catalyst deactivation and the complex phenomena arising on the carbon surface. We investigated thermal and catalytical pyrolysis of methane in a tubular quartz reactor with an internal diameter of 3.8cm. We modeled soot deposition and added a new surface mass balance that parametrize bed porosity as time-dependent variable. Our model predicts occlusion (clogging) time for empty and packed bed reactor: operating at 1373 K, an empty bed clogs in 15 d, which is coherent with industrial operations. The model well predicts methane conversion in the empty reactor even after 24h time on stream. When a packed bed is used, the experimental conversion follow the predicted activity decay, with deviations due to the size distribution of the carbon during experiments. Radiation is the main heat transfer mechanism (86% of the total heat absorbed by the system), compared to the others involved in this system, i.e., conduction, which is more than 50 times smaller, natural convection, more than 18 times smaller, and forced convection, more than 300 times smaller.

Electricity energy-saving behavior of households in Jordan: a qualitative study

PurposeGiven the rapid increase in energy consumption in the residential sector in Jordan recently, the question of how to promote energy-saving behavior in Jordanian households is an emerging topic that is receiving increasing attention from scholars and academics. Generally, there is an unresolved paradox in the literature concerning electricity-saving behaviors. On one hand, numerous studies highlight energy-saving behaviors. On the other hand, recent research indicates the presence of significant untapped potential in electricity-saving behaviors. Therefore, it is useful to revisit the construct of these behaviors qualitatively to expand understanding. The study aimed to provide a better understanding of electricity energy-saving behaviors in terms of its motivations, barriers and support mechanisms from household heads' or household members' perspectivesDesign/methodology/approachQualitative study in a sample of households in north Jordan was conducted in the Irbid province using grounded theory methodology. The analysis of qualitative data involved coding, followed by the integration of codes into more comprehensive categories and themes and interpreting the findings.FindingsThe results identify the motivations for households to save energy, the main barriers to indulging in electricity energy-saving behaviors, and the main support mechanisms and perceived support of electricity energy-saving behaviorsPractical implicationsThe findings bear significant implications for targeted interventions in the study area, improving motivations and addressing local barriers and can inform future policy issues by tailoring initiatives to the specific context.Originality/valueThis study is distinguished by being the first study that specializes in electricity energy-saving behavior of households in Jordan, using new methodology and techniques (qualitative survey).

Exploration of cephalexin adsorption mechanisms onto bauxite and palygorskite and regeneration of spent adsorbents with cold plasma bubbling

The aim of the present study was the direct comparison of two popular minerals, bauxite and palygorskite, as adsorbents for the removal of cephalexin (CPX) from aqueous solutions and the regeneration of the spent adsorbents through cold atmospheric plasma. Batch kinetics and isotherm studies were carried out to evaluate the effect of contact time, initial CPX concentration, adsorbent dosage, pH and temperature. The adsorbents were characterized by ATR-FTIR, N2 sorption, SEM and XRD, while several isotherm, kinetic and thermodynamic models were evaluated attempting to shed light on the adsorption mechanisms. CPX adsorption on both adsorbents was better described by Langmuir model, with an adsorption capacity of 112.36 mg/g for palygorskite and 11.79 mg/g for bauxite. Thermodynamics revealed the endothermic and the spontaneous character of the process, indicating chemisorption as the main adsorption mechanism for both adsorbents. The pseudo-second-order and the Elovich models fitted satisfactorily the adsorption onto bauxite, while adsorption onto palygorskite was well presented by Weber–Morris model, indicating that pore diffusion is also involved in the process. The adsorption capacity of both minerals decreased significantly after being used for several adsorption cycles and then almost completely recovered (regeneration efficiency was 99.6% and 98% for palygorskite and bauxite, respectively) inside a novel cold plasma microbubble reactor energized by high-voltage nanopulses, revealing the potential of these adsorbents to be reused. In addition to the regeneration of the adsorbents, the cold plasma completely eliminated the CPX transferred from the solid to the aqueous phase during the regeneration process.

Numerical Investigations of Outer-Layer Turbulent Boundary Layer Control for Drag Reduction Through Micro Fluidic-Jet Actuators

Drag reduction through turbulent boundary layer control (TBLC) is an essential way to develop green aviation technologies. Compared with traditional approaches for drag reduction, turbulence drag reduction is a relatively new technology, particularly for skin friction drag reduction, and it is becoming a hotspot problem worldwide. This paper focuses on the research of micro fluidic-jet actuators used for outer-layer boundary layer control with high-performance computing (HPC). This study aims to reduce turbulent drag by reshaping the flow structure within the turbulent boundary layer. To ensure the calculation accuracy of the core region and reduce the consumption of computing resources, a zonal LES/RANS strategy and WMLES method are proposed to simulate the effects of fluidic-actuators for outer-layer boundary control, in which high-performance computing has to be involved. The studies are performed on the classical zero-gradient turbulent flat plate cases, in which three different control strategies named “W-control,” “V-control,” and “VW-control” are used and compared to study the effects of drag reduction under a low Reynolds number at Reτ = 470 and a higher Reynolds number at Reτ = 4700. The mechanism for drag reduction is analysed via a pre-multiplied spectral method and a parallel dynamic mode decomposition (DMD) method. The results show that the present approach can effectively simulate the outer-layer turbulent boundary control where the “V-control” with the fluidic-jet actuator array behaves well to achieve an average drag reduction (DR) rate of more than 5% for the high Reynolds number case of the flat plate boundary layer. The high Reynolds shear stress and turbulent kinetic energy distribution in the boundary layer region show an obvious uplift under the effects of actuators, which is the main mechanism for drag reduction.

A Ratiometric Fluorescent Sensor for Penicillin G Based on Color-Tunable Gold-Silver Nanoclusters.

Excessive administration of penicillin G and improper disposal of its residues pose a serious risk to human health; therefore, the development of convenient methods for monitoring penicillin G levels in products is essential. Herein, novel gold-silver nanoclusters (AuAgNCs) were synthesized using chicken egg white and 6-aza-2-thiothymine as dual ligands with strong yellow fluorescence at 509 and 689 nm for the highly selective detection of penicillin G. The AuAgNCs were characterized using transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet-visible absorption spectrophotometry, and fluorescence spectrophotometry. Under optimum conditions, the fluorescence intensity decreased linearly with the concentration of penicillin G from 0.2 to 6 μM, with a low detection limit of 18 nM. Real sample analyses indicated that a sensor developed using the AuAgNCs could detect penicillin G in urine and water samples within 10 min, with the recoveries ranging from 99.7 to 104.0%. The particle size of the AuAgNCs increased from 1.80 to 9.06 nm in the presence of penicillin G. We believe the aggregation-induced quenching of the fluorescence of the AuAgNCs was the main mechanism for the detection of penicillin G. These results demonstrate the ability of our sensor for monitoring penicillin G levels in environmental and clinic samples.

Encapsulating carboxymethyl cellulose stabilized nanoscale ferrous sulfide with layered magnesium hydroxide shell for controlled reactivity release and long-term sequestration of Cr(Ⅵ)

Nanoparticulate iron sulfide (nano-FeS) is a highly effective and environmentally-friendly reducing agent for decontamination. However, challenges such as aggregation, poor mobility, and oxidative aging limit its application of in situ groundwater and soil remediation. Herein, we present a novel approach to enhance the feasibility and effectiveness of nano-FeS for in situ remediation by encapsulating carboxymethyl cellulose stabilized FeS nanoparticles with a layered magnesium hydroxide shell (referred to as CMC-FeS@Mg(OH)2). The novel CMC-FeS@Mg(OH)2 nanoparticles, with a suitable coating ratio (10 %–50 %), demonstrate considerably increased colloidal stability and enhanced mobility in porous media. This is mainly due to steric hindrance, and decreased attachment, blocking, and straining effects. The Mg(OH)2 shell obviously protects the reactivity of FeS nanoparticles and enhances their resistance to oxidation, ensuring their longevity and long-term decontamination effectiveness during practical field applications. The preserved reactivity of FeS core can be progressively released and fully recovered by modulating the Mg(OH)2 coating ration and the extent of dissolution. After the complete dissolution of the Mg(OH)2 shell, CMC-FeS@50 % Mg(OH)2 exhibits enhanced efficiency in Cr(VI) sequestration, increasing from 58 % to 92 % compared to bare FeS. The removal of Cr(VI) by CMC-FeS@Mg(OH)2 is a synergistic process, and the main mechanisms includes adsorption, reduction, ion exchange, and subsequent precipitation. These results demonstrate a promising and effective method to improve the mobility and longevity of FeS and enable the controlled reactivity release for in situ remediation of subsurface contamination.

Diffusion Mediates Molecular Transport through the Perivascular Space in the Brain.

The perivascular space has been proposed as a clearance pathway for degradation products in the brain, including amyloid β, the accumulation of which may induce Alzheimer's disease. Live images were acquired using a two-photon microscope through a closed cranial window in mice. In topical application experiments, the dynamics of FITC-dextran were evaluated from 30 to 150 min after the application and closure of the window. In continuous injection experiments, image acquisition began before the continuous injection of FITC-dextran. The transport of dextran molecules of different sizes was evaluated. In topical application experiments, circumferential accumulation around the penetrating arteries, veins, and capillaries was observed, even at the beginning of the observation period. No further increases were detected. In continuous injection experiments, a time-dependent increase in the fluorescence intensity was observed around the penetrating arteries and veins. Lower-molecular-weight dextran was transported more rapidly than higher-molecular-weight dextran, especially around the arteries. The largest dextran molecules were not transported significantly during the observation period. The size-dependent transport of dextran observed in the present study strongly suggests that diffusion is the main mechanism mediating substance transport in the perivascular space.

Salvianolic Acid B Significantly Suppresses the Migration of Melanoma Cells via Direct Interaction with β-Actin.

Melanoma is the most aggressive and difficult to treat of all skin cancers. Despite advances in the treatment of melanoma, the prognosis for melanoma patients remains poor, and the recurrence rate remains high. There is substantial evidence that Chinese herbals effectively prevent and treat melanoma. The bioactive ingredient Salvianolic acid B (SAB) found in Salvia miltiorrhiza, a well-known Chinese herbal with various biological functions, exhibits inhibitory activity against various cancers. A375 and mouse B16 cell lines were used to evaluate the main targets and mechanisms of SAB in inhibiting melanoma migration. Online bioinformatics analysis, Western blotting, immunofluorescence, molecular fishing, dot blot, and molecular docking assays were carried out to clarify the potential molecular mechanism. We found that SAB prevents the migration and invasion of melanoma cells by inhibiting the epithelial-mesenchymal transition (EMT) process of melanoma cells. As well as interacting directly with the N-terminal domain of β-actin, SAB enhanced its compactness and stability, thereby inhibiting the migration of cells. Taken together, SAB could significantly suppress the migration of melanoma cells via direct binding with β-actin, suggesting that SAB could be a helpful supplement that may enhance chemotherapeutic outcomes and benefit melanoma patients.

Failure Mechanism and Residual Stress Analysis of Crystal Materials for the Thermal Battery

This paper investigates the thermal battery as a research topic. We conducted an in-depth analysis of various thermal battery aspects, such as the cathode material CoS2 and electrolyte material morphology, crystal type, and interface state changes before and after service. The aim was to explore the core reaction and main failure mechanisms of the thermal battery. Prior to the reaction, the thermal battery cathode and electrolyte material consisted of pure-phase CoS2 and a composition of MgO-LiF/LiBr/LiCl. After service, the cathode and electrolyte of the single thermal battery exhibited significant morphological alterations caused by the presence of a molten state. The cathode transformed from CoS2 to Co3S4 and Co9S8 together with the presence of a marginal quantity of Co monomers visible throughout the discharge process, which was confirmed by means of XRD and XPS analyses. After the reaction, the electrolyte material was primarily made up of LiF, LiBr, and LiCl while the crystal components remained largely unaltered, albeit with apparent morphological variations. As was deduced from the thermodynamic analysis, the cathode material’s decomposition temperature stood at 655 °C, exceeding the working temperature of the thermal battery (500 °C) by a considerable margin, which is indicative of outstanding thermal durability within the thermal battery’s operational temperature range. Furthermore, the discharge reaction of the positive electrode was incomplete, resulting in reduced CoS2 residue in the thermal battery monomer after service. The reaction yielded a combination of Co3S4, Co9S8, and small amounts of Co monomers, indicating possible inconsistencies in the phase composition of the pole piece during the reaction process. In this study, we examine the distribution of residual stress in the thermal battery under various operating conditions. The simulation results indicate that exposure to a 70 °C environment for 2 h causes the maximum residual stress of the battery, which had an initial temperature of 25 °C, to reach 0.26 GPa. The thermal battery subjected to an initial temperature of 25 °C exhibited a maximum residual stress of 0.42 GPa subsequent to a 2-hour exposure to a temperature of −50 °C.

Ecophysiological and genomic approaches to cyanobacterial hardening for restoration.

Cyanobacteria inhabit extreme environments, including drylands, providing multiple benefits to the ecosystem. Soil degradation in warm drylands is increasing due to land use intensification. Restoration methods adapted to the extreme stress in drylands are being developed, such as cyanobacteria inoculation to recover biocrusts. For this type of restoration method to be a success, it is crucial to optimize the survival of inoculated cyanobacteria in the field. One strategy is to harden them to be acclimated to stressful conditions after laboratory culturing. Here, we analyzed the genome and ecophysiological response to osmotic desiccation and UVR stresses of an Antarctic cyanobacterium, Stenomitos frigidus ULC029, which is closely related to other cyanobacteria from warm and cold dryland soils. Chlorophyll a concentrations showed that preculturing ULC029 under moderate osmotic stress improved its survival during an assay of desiccation plus rehydration under UVR. Additionally, its sequential exposure to these stress factors increased the production of exopolysaccharides, carotenoids, and scytonemin. Desiccation, but not osmotic stress, increased the concentrations of the osmoprotectants trehalose and sucrose. However, osmotic stress might induce the production of other osmoprotectants, for which the complete pathways were observed in the ULC029 genome. In total, 140 genes known to be involved in stress resistance were annotated. Here, we confirm that the sequential application of moderate osmotic stress and dehydration could improve cyanobacterial hardening for soil restoration by inducing several resistance mechanisms. We provide a high-quality genome of ULC029 and a description of the main resistance mechanisms (i.e., production of exopolysaccharides, osmoprotectants, chlorophyll, and carotenoids; DNA repair; and oxidative stress protection).

Cooling Damage Characterization and Chemical-Enhanced Oil Recovery in Low-Permeable and High-Waxy Oil Reservoirs

The well productivity of high-waxy reservoirs is highly influenced by temperature changes. A decrease in temperature can cause the precipitation of wax from the crude oil, leading to a decrease in the formation’s drainage capacity and a drop in oil production. In this study, the wax precipitation of crude oil is characterized by rheological properties tests and differential scanning calorimetry (DSC) thermal analysis. The wax damage characteristics of cores and the relative permeability curves at different temperatures were investigated through coreflood experiments. Furthermore, nanoemulsion is selected as a chemical agent for injection fluid. The nuclear magnetic resonance (NMR) scanning technique is used to investigate the effects of oil recovery enhancement at different pores by increasing temperature and adding nanoemulsion. By comparing the changes in T2 spectra and the distribution pattern of residual oil before and after liquid injection, the results have shown that both increasing temperature and adding nanoemulsion have a significant effect on oil recovery. The improvement of micropores is less pronounced compared to macropores. The produced oil mainly comes from the large pores. When the temperature is lower than the crude oil dewaxing point temperature, there is a serious dewaxing plugging phenomenon in the pores. Additionally, by observing the pattern of residual oil distribution at the end of the NMR online drive, it is hereby classified into wax deposition retention type, weak water washing retention type, and immobilized type, each with its own distinct characteristics. Wettability alteration and interfacial tension reduction can help to improve the drainage capacity of high-wax oil reservoirs, which is the main mechanism of nanoemulsion for enhanced oil recovery. These findings are highly valuable for enhancing the comprehension of the impact of highly waxed crude oils on drainage capacity and the ultimate oil recovery rate, particularly in relation to wax precipitation deposition.

Mechanisms of Myocardial Edema Development in CVD Pathophysiology.

Myocardial edema is the excess accumulation of fluid in the myocardial interstitium or cardiac cells that develops due to changes in capillary permeability, loss of glycocalyx charge, imbalance in lymphatic drainage, or a combination of these factors. Today it is believed that this condition is not only a complication of cardiovascular diseases, but in itself causes aggravation of the disease and increases the risks of adverse outcomes. The study of molecular, genetic, and mechanical changes in the myocardium during edema may contribute to the development of new approaches to the diagnosis and treatment of this condition. This review was conducted to describe the main mechanisms of myocardial edema development at the molecular and cellular levels and to identify promising targets for the regulation of this condition based on articles cited in Pubmed up to January 2024.

Enhanced removal of toluene in heterogeneous aquifers through injecting encapsulated ozone micro-nano bubble water

Organic contaminants have a tendency to accumulate in low-permeability aquifers, making their removal challenging and creating a bottleneck in groundwater remediation efforts. The use of ozone micro-nano bubbles, due to their smaller size compared to traditional macrobubbles, shows potential for efficient penetration into the low-permeability aquifer and effective oxidization of contaminants. This study conducted batch experiments, column studies, and 2D tank experiments to systematically investigate the remediation efficiency of toluene in a heterogeneous aquifer using ozonated water (OW), ozone micro-bubble water (OMBW), and encapsulated ozone micro-nano bubble water (EOMBW) with rhamnolipid. Experimental results showed that rhamnolipid effectively increased the densities and reduced the sizes of micro-nano bubbles, leading to improved ozone preservation and enhanced toluene degradation. Nanobubbles exhibited higher mobility compared to microbubbles in porous media, while rhamnolipid increased the density of penetrated nanobubbles by 9.6 times. EOMBW demonstrated superior efficiency in oxidizing toluene in low-permeability aquifers, and a numerical model was developed to successfully simulate the ozone and toluene concentration. The model revealed that the increased oxidation rate by EOMBW was attributed to the preservation of ozone in micro-nano bubbles and the enhanced toluene oxidation rate. These findings contribute significantly to the application of EOMBW in heterogeneous aquifer remediation.