Main Mechanism Research Articles

The Impact of Climate Change and Extreme Weather Conditions on Cardiovascular Health and Acute Cardiovascular Diseases

Climate change is widely recognized as one of the most significant challenges facing our planet and human civilization. Human activities such as the burning of fossil fuels, deforestation, and industrial processes release greenhouse gases into the atmosphere, leading to a warming of the Earth’s climate. The relationship between climate change and cardiovascular (CV) health, mediated by air pollution and increased ambient temperatures, is complex and very heterogeneous. The main mechanisms underlying the pathogenesis of CV disease at extreme temperatures involve several regulatory pathways, including temperature-sympathetic reactivity, the cold-activated renin-angiotensin system, dehydration, extreme temperature-induced electrolyte imbalances, and heat stroke-induced systemic inflammatory responses. The interplay of these mechanisms may vary based on individual factors, environmental conditions, and an overall health background. The net outcome is a significant increase in CV mortality and a higher incidence of hypertension, type II diabetes mellitus, acute myocardial infarction (AMI), heart failure, and cardiac arrhythmias. Patients with pre-existing CV disorders may be more vulnerable to the effects of global warming and extreme temperatures. There is an urgent need for a comprehensive intervention that spans from the individual level to a systemic or global approach to effectively address this existential problem. Future programs aimed at reducing CV and environmental burdens should require cross-disciplinary collaboration involving physicians, researchers, public health workers, political scientists, legislators, and national leaders to mitigate the effects of climate change.

Enhanced Yield Strength and Total Elongation of an Ultrahigh Strength Hot‐Stamped Steel via Tempering Treatment

A 2460 MPa ultimate tensile strength (UTS) has been achieved in this experimental steel, which was processed by a conventional hot stamping process with water quenching to room temperature. Additionally, comparing the microstructure evolution and strengthening mechanism before and after tempering, the microstructure has changed from fresh martensite transformed into tempered martensite with acicular carbides, and the fracture mode has also changed from brittle fracture transformed into ductile fracture mainly. Meanwhile, the main strengthening mechanism has changed from dislocation strengthening to precipitation and dislocation strengthening. Overall, the tempering process reduces dislocation density and produces acicular carbides, which decrease UTS. However, the tempering process reduces the quenching residual stress and changes the morphology of twin martensite, resulting in an increase in ductility. Meanwhile, it enhances the effect of carbide pinning dislocations, significantly enhances precipitation strengthening, and improves yield strength.

Screening Ultra-Stable (Phenazine)dioxyalkanocic Acids with Varied Water-Solubilizing Chain Lengths for High-Capacity Aqueous Redox Flow Batteries.

Aqueous redox flow batteries (ARFBs) hold great potential for large-scale energy storage. Recently, research on aqueous flow batteries has shifted toward water-soluble organic molecules with redox capabilities to reduce the use of mineral resources. The chemical and electrochemical stabilities of organic compounds are heavily influenced by their functional groups and reaction sites. In this study, we present a low-cost synthesis of the O-alkyl-carboxylate-functionalized derivatives of 2,3-dihydroxyphenazine, namely, phenazine-(2,3-diyl) dioxy dibutyric acid (DBEP) and phenazine-(2,3-diyl)dioxy diacetic acid (DAEP), which serve as negolytes and exhibit good reversibility and high redox kinetics. The evidence is provided to clarify the capacity degradation mechanisms of DAEP and DBEP by a series of comprehensive characterizations. Similar to anthraquinones functionalized with alkyl chains, the main degradation mechanism of DAEP modified with acetic acid is due to side chain loss. Longer side chains are more stable and can withstand long-term electrochemical reactions. DBEP modified with butyric acid exhibits superior chemical and electrochemical stability. Our results demonstrate that rational molecular design and suitable membranes, such as the alkaline ARFBs based on DBEP negolyte, potassium ferrocyanide (K4Fe(CN)6) posolyte, and custom sulfonated poly(ether ether ketone) membrane, can deliver a high open-circuit voltage of 1.17 V and high capacity retention of 99.997% per cycle for over 1000 cycles at 50 mA cm-2. This study highlights the importance of not only considering the modification position of the molecules but also focusing on the influence of various side chains on the redox core's stability toward sustainable grid-scale energy storage applications.

C−C Coupling in CO2 Electroreduction on Single Cu‐Modified Covalent Triazine Frameworks: A Static and Dynamic Density Functional Theory Study

AbstractThe electrochemical reduction of CO2 into C2+ products represents a promising solution to completing the carbon cycle, thereby fostering a sustainable energy supply. Single‐atom electrocatalysts (SAECs) have garnered significant attention as efficient electrocatalysts for the CO2 reduction reaction. Herein, we carried out a first‐principles study on the mechanism of C−C bond formation on single‐Cu‐atom‐modified covalent triazine frameworks (Cu‐CTFs), which are a promising platform for SAECs. Static density functional calculations indicated that the dimerization of CO, which is the main mechanism for C−C bond formation on bulk Cu metals, was not favorable for Cu‐CTFs because of the lack of adjacent Cu sites for co‐adsorption of CO molecules. Rather than CO dimerization, the reaction between adsorbed *CHO and CO to produce *COCHO has a relatively low reaction energy barrier. Constrained ab initio molecular dynamics analyses revealed that the C−C bond‐forming reaction proceeds via insertion of CO at the *CHO intermediate, which has a modest activation energy of 0.09 eV. Specifically, when CO molecule is constrained to be brought close to *CHO, CO insertion between *CHO and Cu occurs at a C−C distance of 1.8 Å. This insertion reaction is the transition step for this C−C bond formation.

Cadmium toxicity and autophagy: a review.

Cadmium (Cd) is an important environmental pollutant that poses a threat to human health and represents a critical component of air pollutants, food sources, and cigarette smoke. Cd is a known carcinogen and has toxic effects on the environment and various organs in humans. Heavy metals within an organism are difficult to biodegrade, and those that enter the respiratory tract are difficult to remove. Autophagy is a key mechanism for counteracting extracellular (microorganisms and foreign bodies) or intracellular (damaged organelles and proteins that cannot be degraded by the proteasome) stress and represents a self-protective mechanism for eukaryotes against heavy metal toxicity. Autophagy maintains cellular homeostasis by isolating and gathering information about foreign chemicals associated with other molecular events. However, autophagy may trigger cell death under certain pathological conditions, including cancer. Autophagy dysfunction is one of the main mechanisms underlying Cd-induced cytotoxicity. In this review, the toxic effects of Cd-induced autophagy on different human organ systems were evaluated, with a focus on hepatotoxicity, nephrotoxicity, respiratory toxicity, and neurotoxicity. This review also highlighted the classical molecular pathways of Cd-induced autophagy, including the ROS-dependent signaling pathways, endoplasmic reticulum (ER) stress pathway, Mammalian target of rapamycin (mTOR) pathway, Beclin-1 and Bcl-2 family, and recently identified molecules associated with Cd. Moreover, research directions for Cd toxicity regarding autophagic function were proposed. This review presents the latest theories to comprehensively reveal autophagy behavior in response to Cd toxicity and proposes novel potential autophagy-targeted prevention and treatment strategies for Cd toxicity and Cd-associated diseases in humans.

Experimental and clinical evidence in favour of an effective immune stimulation in ER-positive, endocrine-dependent metastatic breast cancer.

In ER+ breast cancer, usually seen as the low immunogenic type, the main mechanisms favouring the immune response or tumour growth and immune evasion in the tumour microenvironment (TME) have been examined. The principal implications of targeting the oestrogen-mediated pathways were also considered. Recent experimental findings point out that anti-oestrogens contribute to the reversion of the immunosuppressive TME. Moreover, some preliminary clinical data with the hormone-immunotherapy association in a metastatic setting support the notion that the reversion of immune suppression in TME is likely favoured by the G0-G1 state induced by anti-oestrogens. Following immune stimulation, the reverted immune suppression allows the boosting of the effector cells of the innate and adaptive immune response. This suggests that ER+ breast cancer is a molecular subtype where a successful active immune manipulation can be attained. If this is confirmed by a prospective multicentre trial, which is expected in light of the provided evidence, the proposed hormone immunotherapy can also be tested in the adjuvant setting. Furthermore, the different rationale suggests a synergistic activity of our proposed immunotherapy with the currently recommended regimen consisting of antioestrogens combined with cyclin kinase inhibitors. Overall, this lays the foundation for a shift in clinical practice within this most prevalent molecular subtype of breast cancer.

Immune Checkpoint Inhibitor-Associated Myocarditis: A Literature Review.

Recently in the field of oncology, immune checkpoint inhibitors (ICI) are being increasingly utilized both in clinical trials and in clinical practice. It is a form of biological therapy that targets tumors by activating the immune system, which in turn eliminates proliferating cancer cells. These have numerous immune-related adverse events (irAEs), one of which is myocarditis, which has high rates of mortality. This article was a narrative review of myocarditis related to ICI use. Studies from the PubMed, Cochrane, and American Society of Clinical Oncology (ASCO) databases were used in writing this review. The databases were searched for original publications for adverse effects related to ICI use and myocarditis specifically.There are numerous published instances of cancer immunotherapy causing myocarditis. ICI therapy has numerous benefits, as it upregulates the immune system to target cancer cells, utilizing the body's own defense mechanisms to target proliferating cells. Myocarditis is a serious side effect, however. Therefore, on balance, these monotherapies are worth using. While this literature review primarily identifies cross-reaction as the main mechanism of myocarditis, there are other possible mechanisms. One proposed mechanism involves a shared antigen between the myocardial tissue and the tumor. This mechanism is called molecular mimicry, where the monoclonal antibody attacks both the myocardial tissue and the tumor cell. Management of ICI-induced myocarditis has not been studied by randomized controlled trials or prospective studies, but based on previous case reports and case series it is mostly treated with steroids initially. An ICI rechallenge after temporary discontinuation appears conceivable in many cases, especially given its therapeutic effects, but only limited data are available on the safety of a rechallenge after an irAE. The lack of RCTs regarding rechallenge with an ICI after irAE, more so specifically about myocarditis, along with the overall results and the complexity involved in such cases once again emphasize the need to make decisions on an individual basis by a multidisciplinary expert working group. At the same time, the focus should also be on publishing more data as the need will grow along with the indications for ICI therapies.

Postnatal Exposure to the Endocrine Disruptor Dichlorodiphenyltrichloroethane Affects Adrenomedullary Chromaffin Cell Physiology and Alters the Balance of Mechanisms Underlying Cell Renewal.

Dichlorodiphenyltrichloroethane (DDT) is a wide-spread systemic pollutant with endocrine disrupting properties. Prenatal exposure to low doses of DDT has been shown to affect adrenal medulla growth and function. The role of postnatal exposure to DDT in developmental disorders remains unclear. The aim of the present investigation is to assess growth parameters and the expression of factors mediating the function and renewal of chromaffin cells in the adult adrenal medulla of male Wistar rats exposed to the endocrine disruptor o,p'-DDT since birth until sexual maturation. The DDT-exposed rats exhibited normal growth of the adrenal medulla but significantly decreased tyrosine hydroxylase production by chromaffin cells during postnatal period. Unlike the control, the exposed rats showed enhanced proliferation and reduced expression of nuclear β-catenin, transcription factor Oct4, and ligand of Sonic hedgehog after termination of the adrenal growth period. No expression of pluripotency marker Sox2 and absence of Ascl 1-positive progenitors were found in the adrenal medulla during postnatal ontogeny of the exposed and the control rats. The present findings indicate that an increase in proliferative activity and inhibition of the formation of reserve for chromaffin cell renewal, two main mechanisms for cell maintenance in adrenal medulla, in the adult DDT-exposed rats may reflect a compensatory reaction aimed at the restoration of catecholamine production levels. The increased proliferation of chromaffin cells in adults suggests excessive growth of the adrenal medulla. Thus, postnatal exposure to DDT alters cell physiology and increases the risk of functional insufficiency and hyperplasia of the adrenal medulla.

Effects of Stress on Transport Properties in Fractured Porous Rocks

Abstract The nonlinear characteristics of the rock transport properties (permeability and electrical conductivity in this study) as a function of stress are closely related to the geometry of the pore space, which consists of stiff pores, microcracks, or microfractures. We consider two behaviors of the pore space, one linear and the other exponential, related to the stiff pores and microfractures, respectively, where the relation between stress and strain can be described by the Two-Part Hooke’s Model. With this model, the relations between porosity, transport properties, and effective stress (confining minus pore pressure) can be obtained and validated with the experimental data of four tight sandstones collected from the Shaximiao Formation of Sichuan Basin, southwest China. The agreement is good. At low effective stresses, the closure of cracks is the main mechanism affecting the transport properties, whose behavior is similar in terms of their parameters. Subsequently, experimental data of nine tight sandstones from the Yanchang Formation, collected from the Ordos Basin, west China, are employed to confirm the previous results, indicating that the fluid and electrical current follow the same path in the pore space.

FOXO3a-interacting proteins' involvement in cancer: a review.

Due to its role in apoptosis, differentiation, cell cycle arrest, and DNA damage repair in stress responses (oxidative stress, hypoxia, chemotherapeutic drugs, and UV irradiation or radiotherapy), FOXO3a is considered a key tumor suppressor that determines radiotherapeutic and chemotherapeutic responses in cancer cells. Mutations in the FOXO3a gene are rare, even in cancer cells. Post-translational regulations are the main mechanisms for inactivating FOXO3a. The subcellular localization, stability, transcriptional activity, and DNA binding affinity for FOXO3a can be modulated via various post-translational modifications, including phosphorylation, acetylation, and interactions with other transcriptional factors or regulators. This review summarizes how proteins that interact with FOXO3a engage in cancer progression.

Correlation between microstructure, mechanical properties, and slurry erosion behavior of hot-rolled dual-phase steel

A low alloy dual-phase steel was produced via a thermo-mechanical control process to improve production efficiency and reduce costs. The study investigates the influence of martensite volume fractions on the mechanical properties and slurry erosion behavior of the hot-rolled dual-phase steel, and the correlation between the mechanical properties and slurry erosion behavior was revealed to provide insights into the material's wear resistance. Microstructure of dual-phase steel with varying martensite were characterized, and nanohardness, Vickers hardness, tensile propertiy, and slurry erosion were tested. Result indicates that martensite content significantly affects the mechanical propertiy of the hot-rolled dual-phase steel. Hardness and strength increase with increased martensite content, exhibiting a linear relationship. The main strengthening mechanisms are dislocation and solid solution strengthening. Slurry erosion result reveals that matrix hardness, martensite content/size, and work hardening ability significantly impact the slurry erosion performance of hot-rolled dual-phase steel. Martensite plays a crucial role in resisting wear failure, with higher content and larger size providing better protection to the soft ferrite and reducing erosion weight loss. Work hardening ability also leads to a decrease in periodic erosion weight loss.

Chitosan-β-cyclodextrin composite flocculants dual-drive for efficient microalgae harvesting: Structural evidences, dehydration process, E-DLVO model behavior and biomass utilization

Flocculation is one of the promising methods for harvesting microalgae. In this study, a series of grafted cationic chitosan-cyclodextrin composite flocculants (CTS/β-CDs) with different structural properties were prepared from chitosan and cyclodextrin. The results showed that the harvesting efficiency of CTS/β-CD-1 for C. vulgaris reached 99.91%. The chain type of polymeric flocculants with moderate graft chain lengths (L = 10–20) and tighter branched chain density distribution (D = 1.0–1.8) was favorable for C. vulgaris harvesting. The addition of CTS/β-CDs caused the discrete C. vulgaris cells to be flocculated and aggregated, and the reorganization of particles resulted in larger particles after flocculation, improving the dewatering performance of microalgae flocs. CTS/β-CDs had no significant inhibitory effect on the extraction of lipids, proteins and carbohydrates, and did not affect the extraction and quality of fatty acid methyl esters, and the re-cultivation experiments of the harvested water showed that chitosan-based flocculant was able to effectively reduce the cost of microalgae harvesting. Electrostatic interactions and bridging were the main harvesting mechanisms between CTS/β-CD-1 and C vulgaris. E-DLVO modeling suggested that flocculation is mainly a result of electrostatic and acid-base interactions when the distance between particles is small. At higher pH, the harvesting efficiency of CTS/β-CD-1 with C. vulgaris decreased. The study contributes to a better understanding of the structure–activity relationship between the structural characteristics of flocculants and the harvesting performance.

Effect of silicon content on the corrosion behaviors of CrAlSiN thin films deposited by magnetron co-sputtering

One CrAlN and four CrAlSiN thin films containing 0.8–7.3 at. % Si were grown by a magnetron co-sputtering process using pure Cr, Al, and Si targets. The microstructure of the CrAlSiN coating changed from a coarse columnar structure to a dense and compact morphology as Si content increased from 0.8 to 7.3 at. % due to the formation of more amounts of amorphous silicon nitride phase to block the growth of columnar grains. Pitting corrosion was the main corrosion failure mechanism for each coating. According to the potentiodynamic polarization test, the lowest corrosion current density, the highest pitting potential, and the widest passivation range were obtained on the 7.3 at. % Si contained CrAlSiN coating. After the electrochemical impedance spectroscopy study of CrAlN and CrAlSiN thin films in 3.5 wt. % NaCl aqueous solution for 100 h immersion, the corrosion resistance of CrAlSiN thin films was 14 times higher than the CrAlN film due to its fine nanocolumnar microstructure to effectively retard the attack of corrosive electrolyte through the defects of coating.

Telomere Length, Mitochondrial DNA, and Micronucleus Yield in Response to Oxidative Stress in Peripheral Blood Mononuclear Cells.

Telomere shortening, chromosomal damage, and mitochondrial dysfunction are major initiators of cell aging and biomarkers of many diseases. However, the underlying correlations between nuclear and mitochondrial DNA alterations remain unclear. We investigated the relationship between telomere length (TL) and micronucleus (MN) and their association with mitochondrial DNA copy number (mtDNAcn) in peripheral blood mononuclear cells (PBMCs) in response to 100 μM and 200 μM of hydrogen peroxide (H2O2) at 44, 72, and 96 h. Significant TL shortening was observed after both doses of H2O2 and at all times (all p < 0.05). A concomitant increase in MN was found at 72 h (p < 0.01) and persisted at 96 h (p < 0.01). An increase in mtDNAcn (p = 0.04) at 200 µM of H2O2 was also found. In PBMCs treated with 200 µM H2O2, a significant inverse correlation was found between TL and MN (r = -0.76, p = 0.03), and mtDNA content was directly correlated with TL (r = 0.6, p = 0.04) and inversely related to MN (r = -0.78, p = 0.02). Telomere shortening is the main triggering mechanism of chromosomal damage in stimulated T lymphocytes under oxidative stress. The significant correlations between nuclear DNA damage and mtDNAcn support the notion of a telomere-mitochondria axis that might influence age-associated pathologies and be a target for the development of relevant anti-aging drugs.

Petroleum-contaminated soil bioremediation and microbial community succession induced by application of co-pyrolysis biochar amendment: An investigation of performances and mechanisms

This study aimed to remediate petroleum-contaminated soil using co-pyrolysis biochar derived from rice husk and cellulose. Rice husk and cellulose were mixed in various weight ratios (0:1, 1:0, 1:1, 1:3 and 3:1) and pyrolyzed under 500 °C. These biochar variants were labeled as R0C1, R1C0, R1C1, R1C3 and R3C1, respectively. Notably, the specific surface area and carbon content of the co- pyrolysis biochar increased, potentially promoting the growth and colonization of soil microorganisms. On the 60th day, the microbial control group achieved a 46.69% removal of pollutants, while the addition of R0C1, R1C0, R1C3, R1C1 and R3C1 resulted in removals of 70.56%, 67.01%, 67.62%, 68.74% and 67.30%, respectively. In contrast, the highest efficiency observed in the abiotic treatment group was only 24.12%. This suggested that the removal of petroleum pollutants was an outcome of the collaborative influence of co-pyrolysis biochar and soil microorganisms. Furthermore, the abundance of Proteobacteria, renowned for its petroleum degradation capability, obviously increased in the treatment group with the addition of co-pyrolysis biochar. This demonstrated that co-pyrolysis biochar could notably stimulate the growth of functionally associated microorganisms. This research confirmed the promising application of co-pyrolysis biochar in the remediation of petroleum-contaminated soil.

In Situ Synthesis of NH2-MIL-53-Al/PAN Nanofibers for Removal Co(II) through an Electrospinning Process.

In this study, researchers developed a novel composite material called NH2-MIL-53-Al/PAN, which consists of metal-organic frameworks (MOFs) grown on electrospun PAN nanofibers (NFs). The successful formation of the composite was confirmed by X-ray diffraction (XRD) and Fourier transform infrared (FTIR), and the hydrophilicity of NH2-MIL-53-Al/PAN was demonstrated by the water contact angle (WCA). Batch experiments were conducted to investigate the adsorption performance of Co(II) under different conditions. The maximum adsorption capacity reached 58.72 mg/g, and almost 95% of the adsorption was achieved within the first 6 h. The adsorption process was found to be spontaneous and endothermic and followed the pseudo-second-order kinetics and Langmuir models. Chemisorption and molecular layer adsorption are the main mechanisms of adsorption, and X-ray photoelectron spectroscopy (XPS) analysis further reveals that the interaction between the adsorbent and cobalt is a coordination interaction. In this study, NH2-MIL-53-Al was grown in situ on PAN to ensure effective loading of MOFs and prevent agglomeration during the NF mixing process. This approach successfully addressed the challenge of exposing active sites within the embedded MOF crystals. Additionally, it overcame the difficulty of recycling traditional MOF adsorbents. As a result, the exceptional performance of MOF NFs offers a promising solution for the efficient removal of cobalt-containing wastewater.

Wing buzzing as a mechanism for generating vibrational signals in psyllids (Hemiptera: Psylloidea).

Psyllids, or jumping plant lice (Hemiptera: Sternorrhyncha: Psylloidea), are a group of small phytophagous insects that include some important pests of crops worldwide. Sexual communication of psyllids occurs via vibrations transmitted through host plants, which play an important role in mate recognition and localization. The signals are species-specific and can be used to aid in psyllid taxonomy and pest control. Several hypotheses have been proposed for the mechanism that generates these vibrations, of which stridulation, that is, friction between parts of the forewing and thorax, has received the most attention. We have investigated vibrational communication in the European pear psyllid species Cacopsylla pyrisuga (Foerster, 1848) using laser vibrometry and high-speed video recording, to directly observe the movements associated with signal production. We describe for the first time the basic characteristics of the signals and signal emission of this species. Based on observations and analysis of the video recordings using a point-tracking algorithm, and their comparison with laser vibrometer recordings, we argue that males of C. pyrisuga produce the vibrations primarily by wing buzzing, that is, tremulation that does not involve friction between the wings and thorax. Comparing observed signal properties with previously published data, we predict that wing buzzing is the main mechanism of signal production in all vibrating psyllids.

Red Blood Cell Contribution to Thrombosis in Polycythemia Vera and Essential Thrombocythemia.

Polycythemia vera (PV) and essential thrombocythemia (ET) are myeloproliferative neoplasms (MPN) characterized by clonal erythrocytosis and thrombocytosis, respectively. The main goal of therapy in PV and ET is to prevent thrombohemorrhagic complications. Despite a debated notion that red blood cells (RBCs) play a passive and minor role in thrombosis, there has been increasing evidence over the past decades that RBCs may play a biological and clinical role in PV and ET pathophysiology. This review summarizes the main mechanisms that suggest the involvement of PV and ET RBCs in thrombosis, including quantitative and qualitative RBC abnormalities reported in these pathologies. Among these abnormalities, we discuss increased RBC counts and hematocrit, that modulate blood rheology by increasing viscosity, as well as qualitative changes, such as deformability, aggregation, expression of adhesion proteins and phosphatidylserine and release of extracellular microvesicles. While the direct relationship between a high red cell count and thrombosis is well-known, the intrinsic defects of RBCs from PV and ET patients are new contributors that need to be investigated in depth in order to elucidate their role and pave the way for new therapeutical strategies.

Research on ultrasonic bone cutting mechanism based on extended finite element method.

The research on the crack propagation mechanism of bone has important research significance and clinical medical value for the selection of cutting parameters and the development of new surgical tools. In this paper, an extended finite element method (X-FEM) model of ultrasonic bone cutting considering microstructure was developed to further study the ultrasonic bone cutting mechanism and to quantitatively analyze the effects of cutting direction, ultrasonic parameters, and cutting parameters on the mechanism of ultrasonic bone cutting crack propagation. The results show that ultrasonic bone cutting is essentially a controlled crack propagation process, in which brittle crack and fatigue crack are the main crack propagation mechanisms. In order to improve the efficiency of ultrasonic bone cutting, large amplitude and high-frequency ultrasonic vibration are preferred. Compared with the other two cutting directions, the crack propagation deflection angle in the transverse cutting direction is the largest, resulting in the worst cutting surface. Therefore, in the path planning of orthopedic surgical robots, the transverse cutting direction should be avoided as much as possible. Frequency only has a significant effect on the crack propagation rate and has a positive correlation. There is a positive correlation between the deflection angle, propagation length, propagation rate, and amplitude, which provides the possibility to control the direction and length of crack propagation by controlling the amplitude of ultrasonic. The feed speed is much lower than the ultrasonic vibration speed, which makes the influence of ultrasonic vibration speed on the crack propagation characteristics dominant. The X-FEM model of ultrasonic bone cutting provides an effective method for selecting reasonable machining parameters of orthopedic robot and optimize the design of ultrasonic osteotome.

Revealing the Antiperspirant Components of Floating Wheat and Their Mechanisms of Action through Metabolomics and Network Pharmacology.

Floating wheat is a classical herbal with potential efficacy in the treatment of hyperhidrosis. Aiming at revealing the main components and potential mechanisms of floating wheat, a comprehensive and unique phytopharmacology profile study was carried out. First, common wheat was used as a control to look for chemical markers of floating wheat. In the screening analysis, a total of 180 shared compounds were characterized in common wheat and floating wheat, respectively. The results showed that floating wheat and common wheat contain similar types of compounds. In addition, in non-targeted metabolomic analysis, when taking the contents of the constituents into account, it was found that there indeed existed quite a difference between floating wheat and common wheat and 17 potential biomarkers for floating wheat. Meanwhile, a total of seven components targeted for hyperhidrosis were screened out based on network pharmacology. Seven key differential components were screened, among which kaempferol, asiatic acid, sclareol, enoxolone, and secoisolariciresinol had higher degree values than the others. The analysis of interacting genes revealed three key genes, namely, MAP2K1, ESR1, and ESR2. The Kyoto Encyclopaedia of Genes and Genomes (KEGG) and Gene Ontology (GO) enrichment analyses showed that various signaling pathways were involved. Prolactin signaling, thyroid cancer, endocrine resistance, gonadotropin secretion, and estrogen signaling pathways were the main pathways of the intervention of floating wheat in excessive sweating, which was associated with the estrogenic response, hormone receptor binding, androgen metabolism, apoptosis, cancer, and many other biological processes. Molecular docking showed that the screened key components could form good bindings with the target proteins through intermolecular forces. This study reveals the active ingredients and potential molecular mechanism of floating wheat in the treatment of hyperhidrosis and provides a reference for subsequent basic research.