Magnetic Thin Films Research Articles

Synthetic route to low damping in ferromagnetic thin-films

Previous theory indicated that the individual monolayers within transition metal ferromagnet thin-films contribute different magnitudes to the total ferromagnetic damping. Here, the aim was to investigate if the thin-film damping could be reduced by electronic engineering of the higher damping regions via localized doping. We present new theoretical analysis and experimental results for sputtered Co thin-films in which the upper and lower surface regions were locally doped with Cr. Theory indicates that local doping does reduce the damping and the experiments show a comparable reduction of the damping with increasing local doping up to 30% Cr, while the measured damping falls further with higher local doping, which may be attributed to changes in the film structure. This work opens a route to create low-damping magnetic thin-films.

Magnetic skyrmions: materials, manipulation, detection, and applications in spintronic devices

Abstract Magnetic skyrmions are vortex-like spin configurations that possess nanometric dimensions, topological stability, and high controllability through various external stimuli. Since their first experimental observation in helimagnet MnSi in 2009, magnetic skyrmions have emerged as a highly promising candidate for carrying information in future high-performance, low-energy-consumption, non-volatile information storage, and logical calculation. In this article, we provide a comprehensive review of the progress made in the field of magnetic skyrmions, specifically in materials, manipulation, detection, and application in spintronic devices. Firstly, we introduce several representative skyrmion material systems, including chiral magnets, magnetic thin films, centrosymmetric materials, and Van der Waals materials. We then discuss various methods for manipulating magnetic skyrmions, such as electric current and electric field, as well as detecting them, mainly through electrical means such as the magnetoresistance effect. Furthermore, we explore device applications based on magnetic skyrmions, such as track memory, logic computing, and neuromorphic devices. Finally, we summarize the challenges faced in skyrmion research and provide future perspectives.

Probing of three-dimensional spin textures in multilayers by field dependent X-ray resonant magnetic scattering

In multilayers of magnetic thin films with perpendicular anisotropy, domain walls can take on hybrid configurations in the vertical direction which minimize the domain wall energy, with Néel walls in the top or bottom layers and Bloch walls in some central layers. These types of textures are theoretically predicted, but their observation has remained challenging until recently, with only a few techniques capable of realizing a three dimensional characterization of their magnetization distribution. Here we perform a field dependent X-ray resonant magnetic scattering measurements on magnetic multilayers exploiting circular dichroism contrast to investigate such structures. Using a combination of micromagnetic and X-ray resonant magnetic scattering simulations along with our experimental results, we characterize the three-dimensional magnetic texture of domain walls, notably the thickness resolved characterization of the size and position of the Bloch part in hybrid walls. We also take a step in advancing the resonant scattering methodology by using measurements performed off the multilayer Bragg angle in order to calibrate the effective absorption of the X-rays, and permitting a quantitative evaluation of the out of plane (z) structure of our samples. Beyond hybrid domain walls, this approach can be used to characterize other periodic chiral structures such as skyrmions, antiskyrmions or even magnetic bobbers or hopfions, in both static and dynamic experiments.

Tuning surface spin polarization of CoFeB by boron diffusion detected by spin resolved photoemission

Abstract Investigation on the spin polarization of the magnetic CoFeB thin film is of practical importance in spintronic applications. Here, using a direct characterization technique of spinresolved photoemission spectroscopy, the surface spin polarization of amorphous Co40Fe40B20 thin films with different annealing temperatures from 100 ℃ to 500 ℃ prepared by magnetron sputtering is obtained. After high annealing temperature, a quasi-semiconductor state is gradually formed at the CoFeB surface due to the boron diffusion. While the global magnetization remains almost constant, the secondary electrons’ spin polarization, average valence band spin polarization and the spin polarization at Fermi level from spin-resolved photoemission spectroscopy show a general trend of decreasing with the increasing of the annealing temperature above 100 ℃. These distinct surface properties are attributed to the enhanced Fe-B bonding due to the boron segregation upon surface after annealing as confirmed by x-ray photoelectron spectroscopy and scanning transmission electron microscopy with energy dispersive spectroscopy. Our findings provide insight into the surface spin-resolved electronic structure of the CoFeB thin films, which should be important for the development of high-performance magnetic random-access memory.

Inducing in-plane uniaxial magnetic anisotropies in amorphous CoFeB thin films

Controlling the magnetic anisotropy of thin magnetic films with in-plane magnetization is of highest relevance particularly for magnetic field sensors. Here, the origin and magnitude of the in-plane magnetic anisotropies of ferromagnetic Co20Fe60B20 films with obliquely sputter-deposited Ta-seed layers are investigated. Uniaxial in-plane anisotropy constants in the range of a few kJ/m3 up to about 25 kJ/m3 become accessible. We find that the anisotropy is predominantly determined by an surface rather than the bulk term. However, the magnetostatic effects arising from the measured directional roughness of the Ta seed cannot fully account for the observed anisotropy, indicating the existence of an additional origin of the anisotropy arising from the oblique sputtering. Further, we find that the anisotropies of films deposited with normal incidence in an applied magnetic field are about an order of magnitude weaker. Overall, this work shows that oblique sputtering offers a strategy to induce in plane anisotropies of up to 25 kJ/m3 in CoFeB, however, at the expense of larger Ta seed thickness.

Fe-intercalated Fe3GeTe2: Potential quasi-van der Waals magnets

In recent years, with the fast development of magnetic devices for information technology, the demands of magnetic thin films with both high functional stability and integration flexibility rapidly increase. It is believed that building a magnet with complementary advantages of van der Waals (vdW) and non-vdW magnets, which can be described as a “quasi-vdW magnet,” will be highly appreciated. One may expect a quasi-vdW magnet to have chemical bonding between the neighboring sublayers for strong magnetic coupling, but to preserve clean surfaces with vdW feature for flexible interface engineering. For this purpose, an intercalation of magnetic atoms into the interlayer gaps of vdW magnets, as a powerful method for tuning the interlayer coupling, can be a practical approach. In this work, using the first-principles calculations, we study the potential to utilize the Fe-intercalation to transform the vdW magnets Fe3GeTe2 (FGT) into quasi-vdW magnets. As two extreme cases, it is revealed that: (i) the Fe-intercalated FGT bilayer Fe-[Fe3GeTe2]2 (Fe-[FGT]2) does have remarkable interlayer ferromagnetic coupling based on covalent bonding between the intercalated Fe atom and FGT monolayers and retains low exfoliation energy with vdW feature, suggesting that the Fe-[FGT]2 bilayer can be regarded as a quasi-vdW magnet; and (ii) the Fe-intercalation can transform the vdW FGT bulk into a non-vdW Fe-Fe3GeTe2 (Fe-FGT) bulk magnet. Accordingly, as for the intermediate cases, it is suggested that Fe-intercalated FGT multilayers (Fen−1-[FGT]n, n > 2) can also be potential quasi-vdW magnets, forming a family of magnetic thin films that provide alternative building blocks for microminiaturized magnetic devices.

Magnetization reversal modes and coercive field dependence on perpendicular magnetic anisotropy in FePt thin films

The competition between shape and perpendicular magnetic anisotropies in magnetic thin films gives rise to unusual magnetic behaviors. In ferromagnetic thin films, the presence of an out-of-plane component of the magnetic anisotropy may induce a transition from planar to stripe-like magnetic domains above a critical thickness, . In this article, we present a detailed study of the magnetization switching mechanism in FePt thin films, where this phenomenon is observed. Using micromagnetic simulations and experiments, we found that below the reversal mechanism is well described by the two-phase model while above this thickness the magnetization within each stripe reverses by coherent rotation. We also analyzed the out-of-plane component of the magnetic anisotropy and its temperature dependence, probing that substrate-induced strains are responsible for the abnormal coercive field behavior observed for FePt films with .

The Progress on Magnetic Material Thin Films Prepared Using Polymer-Assisted Deposition.

Polymer-assisted deposition (PAD) has been widely used in the preparation of high-quality oxides and sulfides for basic research and applications. Specifically, diverse PAD-prepared magnetic material thin films such as ZnO, Ga2O3, SrRuO3, LaCoO3, LaMnO3, Y3Fe5O12, MoS2, MoSe2, and ReS2 thin films have been grown, in which thickness-dependent, strain-modulated, doping-mediated, and/or morphology-dependent room-temperature ferromagnetism (RTFM) have been explored. Inspired by the discovery of intrinsic low-temperature FM in two-dimensional (2D) systems prepared using mechanical exfoliation, the search for more convenient methods to prepare 2D ferromagnetic materials with high-temperature FM has seen explosive growth, but with little success. Fortunately, the very recent synthesis of 2D NiO by PAD has shed light on this challenge. Based on these abovementioned developments, the difficulties of PAD when preparing a-few-nanometer single-crystalline materials and the opportunities in PAD for novel materials such as chiral magnetic soliton material Cr1/3NbS2 are discussed.

Acoustic Waves Induced by Einstein-de Haas Effect in the Ultrafast Core Reversal of Magnetic Vortex.

The interaction between acoustic wave and magnetization in ferromagnetic thin films has attracted great attention due to its interesting physics and potential applications. However, up to now, the magneto-acoustic interaction has mainly been studied on the basis of magnetostriction. In this Letter, we develop a phase field model of magneto-acoustic interaction based on the Einstein-de Haas effect, and predict the acoustic wave during the ultrafast core reversal of magnetic vortex in a ferromagnetic disk. Because of the Einstein-de Haas effect, the ultrafast change of magnetization at the vortex core leads to a large mechanical angular momentum, which induces a body couple at the vortex core and excites a high-frequency acoustic wave. Moreover, the displacement amplitude of the acoustic wave is highly dependent on the gyromagnetic ratio. The smaller the gyromagnetic ratio is, the larger the displacement amplitude is. The present work not only provides a new mechanism for dynamic magnetoelastic coupling but also sheds new insights on the magneto-acoustic interaction.

Spin-phonon coupling in two-dimensional magnetic materials

Recently, two-dimensional magnetic materials (2DMMs) have become a focused research direction in a broad range of two-dimensional materials, due to their underlying significance in fundamental research, as well as in technologically relevant applications for future spintronics, magnonics, quantum information and data storage. The rich toolbox of 2DMMs and their diverse tunability have enabled the unprecedented research concerning the two-dimensional magnetic order down to single atomic layer of materials, much beyond the classical thin film magnetism, showing an extremely promising venue towards electronics, magneto-optics and photonics. Among various degrees of freedoms, the interaction between spin and phonon (i.e., quanta of lattice vibration), hence the so-called spin-phonon coupling, serves as an important tuning knob to explore the two-dimensional magnetism, create new types of quasiparticles and control the magnetic order. This review article overviews the latestdevelopments in spin-phonon coupling investigations in 2DMMs. Various techniquesutilizing spin-phononcoupling to investigate two-dimensional magnetism are discussed.Recent progresses in tuning two-dimensional magnetic order based on spin phonon-coupling are also summarized, with a focus to understand the new functionalities. Furthermore, device developments and concepts based on spin-phonon coupling are briefly discussed. This review will provide our perspectives on the existing challenges and future directions in spin-phonon coupling research in 2DMMs and their functional devices.

Tunable coupling in magnetic thin film heterostructures with a magnetic phase transition

The magnetic properties of permalloy-based trilayers of the form Py0.8Cu0.2/Py0.4Cu0.6/Py/IrMn were studied as the spacer layer undergoes a paramagnetic to ferromagnetic phase transition. We find the coupling between the free Py0.8Cu0.2 layer and the exchange bias pinned Py to be strongly temperature-dependent: there is negligible coupling above the Curie temperature of the Py0.4Cu0.6 spacer layer, strong ferromagnetic coupling below that temperature, and a tunable coupling between these extremes. Polarized neutron reflectometry was used to measure the depth profile of the magnetic order in the system, allowing us to correlate the order parameter with the coupling strength. The thickness dependence shows that these are interface effects with an inverse relationship to thickness, and that there is a magnetic proximity effect that enhances the Curie temperature of the spacer layer with characteristic length scale of about 7 nm. As a demonstration of potential functionality of such a system, the structure is shown to spontaneously flip from the antiparallel to parallel magnetic configuration once the spacer layer has developed long-range magnetic order.

Atomic scale interface engineering for realizing a perpendicularly magnetized CoFeB-based skyrmion hosting material

Néel-type magnetic skyrmions in perpendicularly magnetized systems have attracted considerable interest due to their potential in fundamental research on topological objects and spintronics applications. Various systems have been explored to study Néel-type magnetic skyrmions, including repeated magnetic multilayers, two-dimensional materials, and single magnetic thin-films. Among these, single magnetic thin-films, especially a CoFeB single layer, offers multiple benefits, such as reduced defect energy, high mobility, and easy integration with existing magnetoresistive random access memory technology. However, optimizing CoFeB-based skyrmion hosting materials remains challenging and requires further systematic and comprehensive investigation. In this study, we examine the effect of atomic-scale interface engineering by inserting a Ta layer between the CoFeB/MgO interface on perpendicular magnetic anisotropy, saturation magnetization, and Dzyaloshinskii–Moriya interaction. Moreover, we provide a guideline for engineering material parameters and demonstrate the validity of atomic-scale interface engineering. Our findings contribute to the development of optimized CoFeB-based skyrmion hosting materials.

Nonlinear multi-magnon scattering in artificial spin ice

Magnons, the quantum-mechanical fundamental excitations of magnetic solids, are bosons whose number does not need to be conserved in scattering processes. Microwave-induced parametric magnon processes, often called Suhl instabilities, have been believed to occur in magnetic thin films only, where quasi-continuous magnon bands exist. Here, we reveal the existence of such nonlinear magnon-magnon scattering processes and their coherence in ensembles of magnetic nanostructures known as artificial spin ice. We find that these systems exhibit effective scattering processes akin to those observed in continuous magnetic thin films. We utilize a combined microwave and microfocused Brillouin light scattering measurement approach to investigate the evolution of their modes. Scattering events occur between resonance frequencies that are determined by each nanomagnet’s mode volume and profile. Comparison with numerical simulations reveals that frequency doubling is enabled by exciting a subset of nanomagnets that, in turn, act as nanosized antennas, an effect that is akin to scattering in continuous films. Moreover, our results suggest that tunable directional scattering is possible in these structures.

Proposing magnetoimpedance effect for neuromorphic computing

Oscillation of physical parameters in materials can result in a peak signal in the frequency spectrum of the voltage measured from the materials. This spectrum and its amplitude/frequency tunability, through the application of bias voltage or current, can be used to perform neuron-like cognitive tasks. Magnetic materials, after achieving broad distribution for data storage applications in classical Von Neumann computer architectures, are under intense investigation for their neuromorphic computing capabilities. A recent successful demonstration regards magnetisation oscillation in magnetic thin films by spin transfer or spin orbit torques accompanied by magnetoresistance (MR) effect that can give a voltage peak in the frequency spectrum of voltage with bias current dependence of both peak frequency and amplitude. Here we use classical magnetoimpedance (MI) effect in a magnetic wire to produce such a peak and manipulate its frequency and amplitude by means of the bias voltage. We applied a noise signal to a magnetic wire with high magnetic permeability and owing to the frequency dependence of the magnetic permeability we got frequency dependent impedance with a peak at the maximum permeability. Frequency dependence of the MI effect results in different changes in the voltage amplitude at each frequency when a bias voltage is applied and therefore a shift in the peak position and amplitude can be obtained. The presented method and material provide optimal features in structural simplicity, low-frequency operation (tens of MHz-order) and high robustness at different environmental conditions. Our universal approach can be applied to any system with frequency dependent bias responses.

Anisotropy of magnetic damping in Ta/CoFeB/MgO heterostructures

Magnetic damping controls the performance and operational speed of many spintronics devices. Being a tensor quantity, the damping in magnetic thin films often shows anisotropic behavior with the magnetization orientation. Here, we have studied the anisotropy of damping in Ta/CoFeB/MgO heterostructures, deposited on thermally oxidized Si substrates, as a function of the orientation of magnetization. By performing ferromagnetic resonance (FMR) measurements based on spin pumping and inverse spin Hall effect (ISHE), we extract the damping parameter in those films and find that the anisotropy of damping contains four-fold and two-fold anisotropy terms. We infer that four-fold anisotropy originates from two-magnon scattering (TMS). By studying reference Ta/CoFeB/MgO films, deposited on LiNbO3 substrates, we find that the two-fold anisotropy is correlated with in-plane magnetic anisotropy (IMA) of the films, suggesting its origin as the anisotropy in bulk spin–orbit coupling (SOC) of CoFeB film. We conclude that when IMA is very small, it’s correlation with two-fold anisotropy cannot be experimentally identified. However, as IMA increases, it starts to show a correlation with two-fold anisotropy in damping. These results will be beneficial for designing future spintronics devices.

Improving Néel Domain Walls Dynamics and Skyrmion Stability Using He Ion Irradiation.

Ion irradiation with light ions is an appealing way to finely tune the magnetic properties of thin magnetic films and in particular the perpendicular magnetic anisotropy (PMA). In this work, the effect of He+ irradiation on the magnetization reversal and on the domain wall dynamics of Pt/Co/AlOx trilayers is illustrated. Fluences up to 1.5×1015 ions cm-2 strongly decrease the PMA, without affecting neither the spontaneous magnetization nor the strength of the interfacial Dzyaloshinskii-Moriya interaction (DMI). This confirms experimentally the robustness of the DMI interaction against interfacial chemical intermixing, already predicted by theory. In parallel with the decrease of the PMA, a strong decrease of the domain wall depinning field is observed after irradiation. This allows the domain walls to reach large maximum velocities with a lower magnetic field compared to that needed for the pristine films. Decoupling PMA from DMI can, therefore, be beneficial for the design of low energy devices based on domain wall dynamics. When the samples are irradiated with larger He+ fluences, the magnetization gets close to the out-of-plane/in-plane reorientation transition, where ≈100nm size magnetic skyrmions are stabilized. It is observed that as the He+ fluence increases, the skyrmion size decreases while these magnetic textures become more stable against the application of an external magnetic field, as predicted by theoretical models developed for ultrathin films with labyrinthine domains.

Scanning SQUID-on-tip microscope in a top-loading cryogen-free dilution refrigerator.

The scanning superconducting quantum interference device (SQUID) fabricated on the tip of a sharp quartz pipette (SQUID-on-tip) has emerged as a versatile tool for the nanoscale imaging of magnetic, thermal, and transport properties of microscopic devices of quantum materials. We present the design and performance of a scanning SQUID-on-tip microscope in a top-loading probe of a cryogen-free dilution refrigerator. The microscope is enclosed in a custom-made vacuum-tight cell mounted at the bottom of the probe and is suspended by springs to suppress vibrations caused by the pulse tube cryocooler. Two capillaries allow for the in situ control of helium exchange gas pressure in the cell that is required for thermal imaging. A nanoscale heater is used to create local temperature gradients in the sample, which enables quantitative characterization of relative vibrations between the tip and the sample. The spectrum of the vibrations shows distinct resonant peaks with a maximal power density of about 27 nm/Hz1/2 in the in-plane direction. The performance of the SQUID-on-tip microscope is demonstrated by magnetic imaging of the MnBi2Te4 magnetic topological insulator, magnetization and current distribution imaging in a SrRuO3 ferromagnetic oxide thin film, and thermal imaging of dissipation in graphene.

Directional dependent magnetization in BaFe12O19 thin film

The thin film of BaFe12O19 (BHF) on a silicon substrate has been prepared by the pulse laser deposition method. The crystal structure, morphology, elemental analysis, and magnetic properties have been investigated by using X-Ray Diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy, elemental dispersive x-ray analysis, and vibrating sample magnetometry, respectively. The Rietveld refinement of XRD patterns of BHF powder has been performed to study the crystal structure and lattice parameters. Peak shifting in XRD pattern and Raman spectra for the thin film have been observed compared to that of powder sample. It could be due to the existence of stress at the interface of film and substrate. The magnetic hysteresis loops (M-H loops) of BHF thin film and powder were traced at 60 K and 300 K. The M-H loops of BHF suggest the hard and soft magnetic nature of powder and thin film, respectively. There is a large difference has been observed between saturation magnetization measured by applying a magnetic field parallel and perpendicular directions of the thin film. The bifurcation in zero field cooling (ZFC) and field cooling (FC) magnetization curves reveals the magnetic frustration in the thin films.

Thermoelectric study of Co2FeAl thin films grown onto flexible P(VDF-TrFE-CFE) terpolymer

The necessity of energy conversion solutions has increased over the last years due to the necessity to power the small and flexible devices related to the Internet of things (IoT) concept. One of the most promissory ways to address this challenge relies on thermoelectric effects, such as the anomalous Nernst effect. Here flexible poly (vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) - P(VDF-TrFE-CFE) terpolymer sheet with high dielectric constant were produced by the doctor blade technique and used as the substrate to produce Co2FeAl/P(VDF-TrFE-CFE) heterostructures. The Co2FeAl layers were grown by magnetron sputtering with a thickness of 40 nm. The integration of P(VDF-TrFE-CFE) and magnetron sputtered Co2FeAl thin films allowed to explore the thermomagnetic properties of the composite through the Anomalous Nernst Effect and the influence of the flexible P(VDF-TrFE-CFE) substrate on this effect. The morphological, dielectric, and mechanical properties of the polymer were analyzed, as well as the structural, and magnetic properties of the magnetic thin films to support the thermomagnetic results. The Co2FeAl ferromagnetic thin films presented an isotropic magnetic behaviour, which was reflected in the thermomagnetic curves. Further, the curve's shape is stable irrespective of the thermal gradient and angle of the external magnetic field. The study demonstrates that it is possible to change from a rigid substrate (glass) to a flexible one (polymer), without affecting the thermomagnetic effect. Our findings open new possibilities to produce and integrate flexible high-dielectric polymers with thermomagnetic phenomena, which can be further explored for energy harvesting applications.

Structure and Performance Optimization of Co Magnetic Thin Films Deposited by Vacuum Evaporation Coating.

Co magnetic films are widely used in high-frequency magnetic recording and vertical magnetic recording due to their high saturation magnetization and magnetocrystalline anisotropy. In this work, ferromagnetic Co magnetic films were prepared on copper substrate by vacuum evaporation combined with heat treatment (H2 atmosphere), to investigate the impact of film thickness and annealing temperature on microstructure and magnetic properties. The results show that with the increase in annealing temperature, the Co thin film physical phase does not change significantly, the crystallinity increases, and the grain size increases, which is consistent with the results obtained from the SEM morphology map of the sample surface, leading to an increase in coercivity. By annealing experiments (atmospheric atmosphere) on Co magnetic films with and without an Al protective layer, as shown by scanning electron microscopy microscopic characterization results, it was verified that the Al layer can protect the inner Co layer from oxidation. As the film thickness increases from 10 to 300 nm, the magnetic properties of Co films change significantly. The saturation magnetization gradually increases from 0.89 to 5.21 emu/g, and the coercivity increases from 124.3 to 363.8 Oe. The remanence ratio of the 10 nm magnetic film is 0.82, which is much higher than the film remanence ratio of 0.46 at 50 nm. This is because when the thickness of the film is between 10 and 50 nm, the magnetic moments partially deviate from the in-plane direction, and the out-of-plane component reduces the film remanence ratio. This study shows that optimizing annealing temperature and film thickness can effectively control the structure and magnetic properties of Co magnetic films, which is of great significance for the development of the magnetic recording field.