Magnetic Properties Research Articles

Review of Electrical Steels with their Properties and Recent Trends for Improvement

Objectives: This review study provides a thorough analysis of the magnetic behavior and characteristics of electrical steels, including established and novel materials (3%wt Silicon). Methods: We investigate how composition, microstructure, and processing methods affect the magnetic performance of these steels as well as the basic principles guiding their behavior. Thermomechanical processing can be observed for its impact on the material’s microstructure and magnetic properties. This review discusses testing over samples for conventional processes for different % of cold worked or strain hardening and annealing at higher temperatures i.e., 1200°C. For uncertainties regarding the impact of impurities or inclusions on their magnetic properties, the study was carried out to know the effect of cerium addition on the material’s magnetic properties of the material. Findings: It was observed that rolling temperature has significant effect over magnetic properties of the material. A notable improvement in the magnetic permeability of the material and its critical performance metric for soft magnetic materials is indicated by the increase in “Gamma max”. Similarly, the effects of compressive stresses, doping effect, grain size, annealing, and other manufacturing processes were studied, and observed their impact on magnetic properties. This review discusses the literature on future scope with the latest trends. This helps clarify the trade-offs associated with maximizing electrical steels for certain uses. Novelty: This study presents a novel approach towards electrical steel and its magnetic properties by incorporating different alloying elements and optimizing rolling & annealing parameters. A key innovation is the application of machine learning and neural network to predict and optimize material behavior, core loss and provide methods to improve magnetic properties of electrical steels. Significance: Electrical steels are crucial in transformers and electric motors, enhancing efficiency by minimizing energy losses and improving magnetic performance. This can be achieved by changing manufacturing parameters and operating conditions with the help of latest trends. Keywords: Electrical steel, Magnetic properties, Machine learning, Composition, Microstructure, Core loss

First-principles study and mesoscopic modeling of two-dimensional spin and orbital fluctuations in FeSe

We calculated the structural, electronic, and magnetic properties of FeSe within density-functional theory at the generalized gradient approximation level. First, we studied how the bandwidth of the d-bands at the Fermi energy is renormalized by adding simple corrections: Hubbard U, Hund's J, and by introducing long-range magnetic orders. We found that introducing either a striped or a staggered dimer antiferromagnetic order brings the bandwidths—which are starkly overestimated at the generalized gradient approximation level—closer to those experimentally observed. Second, for the ferromagnetic, the striped, checkerboard, and staggered dimer antiferromagnetic order, we investigate the change in magnetic formation energy with local magnetic moment of Fe at a pressure up to 6 GPa. The bilinear and biquadratic exchange energies are derived from the Heisenberg model and noncollinear first-principles calculations, respectively. We found a nontrivial behavior of the spin-exchange parameters on the magnetization, and we put forward a field-theory model that rationalizes these results in terms of two-dimensional spin and orbital fluctuations. The character of these fluctuations can be either that of a standard density wave or a topological vortex. Topological vortices can result in mesoscopic magnetization structures. Published by the American Physical Society 2024

Characteristics and Magnetic Properties of Carbon-Coated Cobalt Nanoparticles Deposited on Silica

Characteristics and Magnetic Properties of Carbon-Coated Cobalt Nanoparticles Deposited on Silica

Review of: "Magnetic dipoles in paramagnetic material do not have specific and regular orientation; as a result, these materials do not have magnetic properties"

Review of: "Magnetic dipoles in paramagnetic material do not have specific and regular orientation; as a result, these materials do not have magnetic properties"

Multifunctional Copper Sulfide Urchin‐Like Nanostructures for Adsorption and Photocatalysis of Water Contaminants

AbstractWe reported here a one‐step chemical route to prepare nanocomposites comprising CuS nanophases supported on GO sheets with magnetic properties. The synthesis reported here combines such materials in single‐nanostructures that show morphological features well‐suited for wastewater treatment. The photocatalytic performance of CuS/GO nanocomposites was first investigated towards the removal of a common organic dye (rhodamine B) and sulfamethoxazole (SMX), which is an antibiotic considered a water contaminant of emerging concern. The RhB and SMX adsorption efficiency of CuS/GO and Fe3O4/GO/CuS hybrids, as well as of CuS particles, was significantly higher than GO or Fe3O4/GO. Overall, the CuS‐based magnetic and CuS/GO hybrids have shown the capacity to uptake more than 80 % of RhB or SMX, after 120 minutes. Under blue‐led irradiation, almost complete degradation of RhB was achieved in the presence of CuS/Fe3O4/GO, after 180 minutes; and higher than 85 % degradation of SMX, after 240 minutes of irradiation. The photocatalytic behaviour of nanocomposites was best described by the first–order kinetic model, for which k values for degradation of RhB and SMX followed the order: CuS/Fe3O4/GO>CuS/GO>CuS. The tricomponent CuS/Fe3O4/GO can be easily recovered after use and be reused maintain their high photocatalytic performance, thus providing a sustainable and cost‐effective hybrid solution for water treatment.

Noncollinear Magnetic Structures in the Chiral Antiperovskite β-Fe2SeO.

We present the magnetic properties of the chiral, polar, and possibly magnetoelectric antiperovskite β-Fe2SeO as derived from magnetization and specific-heat measurements as well as from powder neutron diffraction and Mössbauer experiments. Our macroscopic data unambiguously reveal two magnetic phase transitions at TN1 ≈ 103 K and TN2 ≈ 78 K, while Rietveld analysis of neutron powder diffraction data reveals a noncollinear antiferromagnetic structure featuring magnetic moments in the a-b plane of the trigonal structure and a ferromagnetic moment along c. The latter is allowed by symmetry between TN1 and TN2, weakly visible in the magnetization data yet unresolvable microscopically. While the intermediate phase can be expressed in the trigonal magnetic space group P31, the magnetic ground state is modulated by a propagation vector q = (1/2 1/2 0) resulting in triclinic symmetry and an even more complex low-temperature spin arrangement which is also reflected in the Mössbauer hyperfine patterns indicating additional splitting of Fe sites below TN2. The complex noncollinear spin arrangements suggest interesting magnetoelectric properties of this polar magnet.

Electrospun Mesoporous Ni0.5Zn0.5Fe2O4 - CNT - Hollow Carbon Ternary Composite Nanofibers as High Performance Electrodes for Advanced Symmetric Supercapacitors.

Spinel ferrites have attracted considerable interest in energy storage systems due to their unique magnetic, electrical and catalytic properties. However, they suffer from poor electronic conductivity and low specific capacity. We have addressed this limitation by synthesizing composite hollow carbon nanofibers (HCNF) embedded with nanostructured Nickel Zinc Ferrite (NZF) and Multiwalled carbon nanotubes (CNT), through coaxial electrospinning. These ternary composite nanofibers NZF-CNT-HCNF have a high specific capacity of 833 C g-1 at a current density of 1 A g-1 and have a capacity retention of 90 % after 3000 cycles. Their performance is much better than pure NZF fibers (180 C g-1) or hollow carbon nanofibers (96 C g-1), suggesting synergy between various constituents of the composite. A symmetric supercapacitor fabricated from NZF-CNT-HCNF composite nanofibers (30 % NZF) has a high specific capacity of 302 C g-1 (302 A g-1) at a current density of 1 A g-1 and has a capacity retention of 95 % after 5000 cycles. At the same current density, the device has a high energy density of 39 Whkg-1 and power density of 1000 Wkg-1 at a current density of 1 A g-1. This performance can be attributed to the high specific surface area (776 m2 g-1), mesoporosity (pore size ~4 nm), interconnectedness of the nanofibers and high electrical conductivity of CNTs. These fibers can be used as light-weight high performance electrode materials in advanced energy storage devices.

The Impact of Coordination Distortion on Magnetic Properties of Co (II) Single‐Ion Magnets With Trigonal Prism Coordination Geometry

ABSTRACTTwo Co (II) compounds [Co (abs)2]·2H2O (1) and [Co (pabs)2] (2) (Habs = N‐(pyridine‐2′‐yl methylene)‐2‐aminobenzene sulfonic acid, Hpabs = N‐[(pyridine‐2′‐yl)(phenyl)methylene]‐2‐aminobenzene sulfonic acid) were synthesized by the introduction of sulfonate ligands with different substitutions. Both Co (II) ions are located in a trigonal prism coordination environment with different coordination distortions. Static magnetic studies and theoretical calculations found that easy‐axis magnetic anisotropy is present in both complexes. The contributions of the negative D values are principally derived from the first quartet excited state. Dynamic magnetic investigations uncovered that both compounds have field‐induced single‐ion magnet (SIM) behavior and their magnetic relaxations mainly realize through Raman and direct pathways.

Electron-Spin Relaxation in Boron-Doped Graphene Nanoribbons.

Boron-doped graphene nanoribbons are promising platforms for developing organic materials with magnetic properties. Boron dopants can be used to create localized magnetic states in nanoribbons with tunable interactions. Controlling the coherence times of these magnetic states is the very first step in designing materials for quantum computation or information storage. In this work, we address the connection between the relaxation time and the position of the dopants for a series of boron-doped graphene nanofragments. We combine Redfield theory and ab initio calculations of magnetic properties to unveil the mechanism that governs spin relaxation in solution. We demonstrate that relaxation times can be in the order of 1 ms for the selected graphene nanofragments. A detailed analysis of the relaxation mechanism reveals that the spin decoherence is fundamentally driven by fluctuations of the spin-orbit coupling, and the hyperfine interaction facilitated by the thermal motion of the graphene nanofragments. The close connection between relaxation time, hyperfine interaction and the spin-orbit coupling offers the perspective of designing attractive materials with long-lived spin states.

Microbial-induced structural changes in non-stoichiometric magnetite via radioanalytical methods

AbstractStructural alterations in non-stoichiometric magnetite induced by microorganisms are studied by nuclear methods. Magnetite samples were exposed to fungal strain known for its immobilization capabilities. Neutron activation analysis identified iron as the dominant element. The presence of maghemite in non-stoichiometric magnetite complicates the determination of iron sites by Mössbauer spectrometry. Mössbauer spectra recorded at 4.2 K display overlapping lines corresponding to tetrahedral and octahedral iron sites. Application of external magnetic field of 6 T improved the spectral resolution and revealed a presence of distinct sextets. Interaction with Aspergillus niger did not notably affect magnetite´s magnetic properties, indicating its stability.

Effect of Ta content on elastic properties and magnetic properties of Zr-Ta binary alloys via first-principles calculation

Abstract β-type Zirconium alloys are promising biomedical implant materials, the elastic and magnetic properties of which are of great importance to be studied. In this work, β-type Zr1-xTax binary alloys (x=0.0625, 0.125, 0.1875, 0.25, 0.3125, 0.375, 0.4375, 0.50, 0.5625, 0.625, 0.6875, 0.75, 0.8125, 0.875, 0.9375) were established. The effects of Ta content on lattice constant, elastic properties and magnetic properties of β-type Zr-Ta alloys were investigated via first-principles calculations, the calculated results were also verified through experiments. The results shown that with the increase of Ta content, the lattice constant and total energy of β-type Zr-Ta alloys gradually decreased, the elastic moduli of E, K and G increased on the whole, and the magnetic moment generally increased first and then decreased. The changing trend of elastic and magnetic properties were consistent between experimental and calculated results. Notably, Zr0.875Ta0.125 exhibited the lowest Young’s modulus and magnetic susceptibility among the β-type Zr-Ta alloys, which was one-third that of Ti-6Al-4V, meeting the requirements for low Young’s modulus and low magnetism, and can be anticipated to be promising biomedical implant materials.

Multi‐Material Gradient Printing Using Meniscus‐enabled Projection Stereolithography (MAPS)

AbstractLight‐based additive manufacturing methods are widely used to print high‐resolution 3D structures for applications in tissue engineering, soft robotics, photonics, and microfluidics, among others. Despite this progress, multi‐material printing with these methods remains challenging due to constraints associated with hardware modifications, control systems, cross‐contamination, waste, and resin properties. Here, a new printing platform coined Meniscus‐enabled Projection Stereolithography (MAPS) is reported, a vat‐free method that relies on generating and maintaining a resin meniscus between a crosslinked structure and bottom window to print lateral, vertical, discrete, or gradient multi‐material 3D structures with no waste and user‐defined mixing between layers. MAPS is compatible with a wide range of resins shown and can print complex multi‐material 3D structures without requiring specialized hardware, software, or complex washing protocols. MAPS's ability to print structures with microscale variations in mechanical stiffness, opacity, surface energy, cell densities, and magnetic properties provides a generic method to make advanced materials for a broad range of applications.

Pnictogen Atom Substitution to Modify the Electronic and Magnetic Properties of SiS2${\rm SiS}_{2}$ Monolayer: A DFT Study

AbstractThe density functional theory (DFT) is employed to study the modulation of electronic and magnetic properties of monolayer through doping with pnictogen (P and As) atoms. monolayer is intrinsically non‐magnetic, exhibiting the semiconductor nature with indirect bandgap of 1.39(2.26) eV provided by standard(hybrid) functional. This 2D material is metallized under effects of single Si vacancy, single S vacancy, and pair Si─S vacancies. In the latter case, significant magnetism with a total magnetic moment of 1.55 is produced mainly by S atoms around the vacancy sites. The monolayer metallization takes place also when doping with P and As atoms at Si sublattice, preserving the nonmagnetic nature. Meanwhile, P and As substitution leads to the emergence of magnetism with total magnetic moments of 0.93 and 0.99 , respectively. Herein, magnetic properties are produced mainly by the outermost orbital of pnictogen impurities. Interestingly, the results assert the emergence of the half‐metallicity, which gives evidence of new highly spin‐polarized 2D materials. Further, doping with pair P/P, As/As, and P/As atoms are also considered with different doping configurations. It is found that the nonmagnetic semiconductor nature is preserved upon doping with pair pnictogen atoms, however, the indirect‐to‐direct gap transition is induced. Moreover, the energy gap exhibits large reduction between 51.80% and 77.70%. The findings in this work may suggest the formation of prospective optoelectronic and spintronic 2D materials by doping monolayer with pnictogen atoms.

Emergent topological quasiparticle kinetics in constricted nanomagnets

The ubiquitous domain wall kinetics under magnetic field or current application describes the dynamic properties in nanostructured magnets. However, when the geometrical size of a nanomagnetic system is constricted to the limiting domain wall length scale, the competing energetics between anisotropy, exchange, and dipolar interactions can cause emergent kinetics due to quasiparticle relaxation, similar to bulk magnets of atomic origin. This paper presents a joint experimental and theoretical study to support this argument: constricted nanomagnets, made of antiferromagnetic and paramagnetic neodymium thin film with honeycomb motif, reveal fast kinetic events at picosecond timescales due to the relaxation of topological quasiparticles that persist to low temperature in the absence of any external stimuli. This discovery is especially important considering the fact that paramagnets or antiferromagnets have no net magnetization. Yet, the kinetics in neodymium nanostructures is quantitatively similar to that found in ferromagnetic counterparts and only varies with the thickness of the specimen. This suggests that a universal, topological quasiparticle-mediated dynamical behavior can be prevalent in nanoscopic magnets, irrespective of the nature of the underlying magnetic material. Published by the American Physical Society 2024

Investigation of Magnetic and Dielectric Properties of Nanofibric Spinel Oxides ACo2O4 (A = Co, Ni, and Fe) Under Low Magnetic Field

Investigation of Magnetic and Dielectric Properties of Nanofibric Spinel Oxides ACo2O4 (A = Co, Ni, and Fe) Under Low Magnetic Field

Microstructural Underpinnings of Giant Intrinsic Exchange Bias in Epitaxial NiCo2O4 Thin Films

AbstractUnderstanding intrinsic exchange bias in nominally single‐component ferromagnetic or ferrimagnetic materials is crucial for simplifying related device architectures. However, the mechanisms behind this phenomenon and its tunability remain elusive, which hinders the efforts to achieve unidirectional magnetization for widespread applications. Inspired by the high tunability of ferrimagnetic inverse spinel NiCo2O4, the origin of intrinsic exchange bias in NiCo2O4 (111) films deposited on Al2O3 (0001) substrates are investigated. The comprehensive characterizations, including electron diffraction, X‐ray reflectometry and spectroscopy, and polarized neutron reflectometry, reveal that intrinsic exchange bias in NiCo2O4 (111)/Al2O3 (0001) arises from a reconstructed antiferromagnetic rock‐salt NixCo1‐xO layer at the interface between the film and the substrate due to a significant structural mismatch. Remarkably, by engineering the interfacial structure under optimal growth conditions, it can achieve exchange bias larger than coercivity, leading to unidirectional magnetization. Such giant intrinsic exchange bias can be utilized for realistic device applications. This work establishes a new material platform based on NiCo2O4, an emergent spintronics material, to study tunable interfacial magnetic and spintronic properties.

Comparative study of the photocatalytic activity of g-C3N4/MN4 (M = Mn, Fe, Co) for water splitting reaction: A theoretical study.

In this study, nanocomposites of g-C3N4/MN4 (where M is Mn, Fe and Co) have been designed using advanced density functional theory (DFT) calculations. A comprehensive analysis was conducted on the geometry, electronic, optical properties, work function, charge transfer interaction and adhesion energy of the g-C3N4/MN4 heterostructures and concluded that g-C3N4/FeN4 and g-C3N4/CoN4 heterojunctions exhibit higher photocatalytic performance than individual units. The better photocatalytic activity can be attributed mainly by two facts; (i) the visible light absorption of both g-C3N4/FeN4 and g-C3N4/CoN4 interfaces are higher compared to its isolated analogs and (ii) a significant enhancement of band gap energy in g-C3N4/FeN4 and g-C3N4/CoN4 heterostructures limited the electron-hole recombination significantly. The potential of the g-C3N4/MN4 heterojunctions as a photocatalyst for the water splitting reaction was assessed by examining its band alignment for water splitting reaction. Importantly, while the electronic and magnetic properties of MN4 systems were studied, this is the first example of inclusion of MN4 on graphene-based material (g-C3N4) for studying the photocatalytic activity. The state of the art DFT calculations emphasis that g-C3N4/FeN4 and g-C3N4/CoN4 heterojunctions are half metallic photocatalysts, which is limited till date.

Study on the Properties and Mechanism of m‐FACs/f‐Fe3O4/Epoxy Wear‐Resistant Magnetic Coating

ABSTRACTIn view of the wear problem of key parts of magnetic fluid seal device, epoxy resin (EP) composite coatings reinforced with Fe3O4 and fly ash cenospheres (FACs) were fabricated successfully. The structural and morphological features of the fillers and the composite coatings were characterized by Fourier transform infrared and scanning electron microscopy. CFT‐I material surface performance comprehensive tester was used to investigate the tribological behaviors of the as‐prepared composite coatings. Vibrating sample magnetometer was used to investigate the coatings' magnetic property. The formation mechanism of the composite coating was analyzed by the infrared spectrum results combined with molecular dynamics simulations. The results demonstrated that adding a certain amount of double fillers will have a synergistic effect, and its mechanical properties are better than those of single fillers. The tribological property of the m‐FACs/f‐Fe3O4/EP composite coatings was optimal under magnetic fluid friction, which is about an order of magnitude lower than the wear rate under dry friction. The saturation magnetization of the m‐FACs/f‐Fe3O4/EP composite coating is 2.77 emu/g, and the magnetic susceptibility reaches 4.64 × 10−4 m3/kg. Therefore, the m‐FACs/f‐Fe3O4/EP composite coating will be expected to solve the wear problem of equipment components in complex environments of magnetic field and friction.

Nano-bio interactions of Gum Arabic-stabilized lanthanide-based upconverting nanoparticles: in vitro and in vivo study.

Lanthanide-based nanoparticles (Ln-NPs) are highly valued for their unique optical and magnetic properties, making them useful in various scientific fields, including materials science and biomedicine. This study investigated the use of Gum Arabic (GA), a natural, non-toxic biopolymer, as capping agent for Ln-NPs to enhance their biocompatibility and chemical and colloidal stability. Specifically, Er3+/Yb3+ co-doped NaGdF4 Ln-NPs were modified with GA, followed by their characterization with respect to upconversion properties and in vitro as well as in vivo toxicity. Herein, widely used ligand-free and polyacrylic acid (PAA)-capped Ln-NPs were used as reference materials. Importantly, the GA-modified Ln-NPs exhibited superior stability in aqueous and biologically relevant media, as well as relatively lower cytotoxicity across multiple cell lines, including U-87 MG, HEPG2, and J774A.1. In vivo studies using zebrafish embryos confirmed the minimal toxicity of GA-capped Ln-NPs. Despite overall low non-specific cellular uptake, hyperspectral imaging and inductively coupled plasma mass spectrometry confirmed the colocalization of the Ln-NPs as a function of their surface chemistry in both cell models and zebrafish. The results suggest GA as an effective surface-stabilizing agent for Ln-NPs, paving the way for future functionalization with targeting agents.

Exfoliation and optical properties of S = 1 triangular lattice antiferromagnet NiGa2S4.

Two-dimensional (2D) van der Waals (vdW) materials have been an exciting area of research ever since scientists first isolated a single layer of graphene. Single layer magnetic materials can provide a pathway for vdW heterostructures with magnetic properties. While most of the magnetic vdW materials exhibit ordering transitions in the bulk, here we report a successful exfoliation of a triangular lattice S = 1 antiferromagnet NiGa[Formula: see text]S[Formula: see text], which already demonstrates exotic magnetism in the bulk material. We establish the number of layers of the material by atomic force microscopy (AFM) and detail a careful characterization using Raman and optical spectroscopy to demonstrate how the optical, electronic, and structural properties of NiGa[Formula: see text]S[Formula: see text] change as a function of sample thickness. Optical measurements and electronic structure calculations of bulk versus monolayer NiGa[Formula: see text]S[Formula: see text] confirm the material to be a Mott insulator with an electronic gap of about 1.5 eV, which slightly increases for layers below 10 L. We conclude with a theoretical analysis of the possibility of doping monolayer NiGa[Formula: see text]S[Formula: see text] by proximity to a metal.