Magnetic Properties Research Articles

Gas‐Induced Electrical and Magnetic Modulation of Two‐Dimensional Conductive Metal–Organic Framework

AbstractControlled modulation of electronic and magnetic properties in stimuli‐responsive materials provides valuable insights for the design of magnetoelectric or multiferroic devices. This paper demonstrates the modulation of electrical and magnetic properties of a semiconductive, paramagnetic metal−organic framework (MOF) Cu3(C6O6)2 with small gaseous molecules, NH3, H2S, and NO. This study merges chemiresistive and magnetic tests to reveal that the MOF undergoes simultaneous changes in electrical conductance and magnetization that are uniquely modulated by each gas. The features of response, including direction, magnitude, and kinetics, are modulated by the physicochemical properties of the gaseous molecules. This study advances the design of multifunctional materials capable of undergoing simultaneous changes in electrical and magnetic properties in response to chemical stimuli.

Anomalous Hall effect and magnetic transition in the kagome material YbMn6Sn6

We investigate the magnetic and transport properties of a kagome magnet YbMn6Sn6. We have grown YbMn6Sn6 single crystals having a HfFe6Ge6 type structure with ordered Yb and Sn atoms, which is different from the distorted structure previously reported. The single crystal undergoes a ferromagnetic phase transition around 300 K and a ferrimagnetic transition at approximately 30 K, and the magnetic transition at low temperature may be correlated to the ordered Yb sublattice. Negative magnetoresistance has been observed at high temperatures, while the positive magnetoresistance appears at 5 K when the current is oriented out of kagome plane. We observe a large anisotropic anomalous Hall effect with the intrinsic Hall contribution of 141 Ω−1cm−1 for σzxint and 32 Ω−1cm−1 for σxyint , respectively. These values are similar to those in YMn6Sn6 with the same anisotropy. The magnetic transition and anomalous Hall behavior in YbMn6Sn6 highlights the influence of the ordered Yb atoms and rare earth elements on its magnetic and transport properties.

Effect of Ca2MnO4 on the magnetic and electric properties in Ca3Mn2O7 ceramics prepared with different sintering temperature

Hybrid improper ferroelectricity Ca3Mn2O7 is the promising multiferroic materials, which has attracted considerable attention due to their potential applications in areas such as electronic devices and storage media. The magnetic and electric properties of the layered perovskite Ca3Mn2O7 ceramics with different proportions of single-layer Ca2MnO4 phase synthesized by solid state reaction within adjusting the sintering temperature have been investigated. The x-ray diffraction patterns and the characteristic of magnetic transition from magnetization curves show that the ratio of Ca2MnO4 is reduced from 22.9 % of sintering at 1200 °C to 0 % of sintering at 1300 °C, which implies that the narrow suitable sintering temperature is the most factor for preparation of pure Ca3Mn2O7 ceramic samples. The ferroelectricity of all samples was investigated and the ferroelectricity decreased with the increase of Ca2MnO4 content due to the presence of non-ferroelectric Ca2MnO4 phase. The magnetoelectric coupling effect was discussed by the magnetization induced from the electric field. The results speculated that a small amount of Ca2MnO4 can improve the magnetoelectric coupling effect due to the interface effect in multiphase materials, which suggests that a new method to enhance the magnetoelectric coupling effect in Ca3Mn2O7 system.

Fabrication and Magnetic Behavior of Jellyfish-Like Ni Nanowires Synthesized Using Bilayered Nanoporous Anodic Alumina Templates.

The potential to produce nanostructures with intricate shapes in large quantities holds promise for a range of applications in the fields of nanoelectronics and biomedicine. Here a method for fabricating Ni jellyfish-like nanowires (JFNWs) using bilayered nanoporous anodic alumina templates with through pores of varying diameters in each layer. To assess the capabilities of this method,samples are created with different voltages during the second step of anodization, resulting in distinct geometrical characteristics of the second layer of the template,and subsequently synthesizeNiJFNWs. By employing magnetometry and first-order reversal curve (FORC)method, the magnetic properties are examined and a significant alteration in their magnetic behavior,attributed to the differing shapes of theJFNWsand the magnetostatic interactions within the array,is observed.The study utilizes magnetic force microscopy to evaluate the stray magnetic fields generated by the individualJFNWsand unveils their unusual and asymmetric distribution. Through simulations based on the experimental data, the study analyzes the field- andcurrent-induced domain wall movement in a singleJFNWand their array. The findings revealnon-trivial micromagnetic configurations in these structures, including a remarkable 'corkscrew' state, and allowfor an examination of the process of magnetization switching.

Towards the Analytical Generalization of the Transcendental Energy Equation, Group Velocity, and Effective Mass in One-Dimensional Periodic Potential Wells with a Computational Application to Common Coupled Potentials

The analytical generalization for N periodic potential wells coupled to a probe rectangular-like potential and a zero potential is extremely important in the study of one-dimensional periodic potentials in solid state physics, e.g., in the calculation of transport, optical, and magnetic properties. These findings raise the possibility of calculating equations for the generalization of N arbitrary potentials related to any potential V(x) using special functions as a solution. In this work, a novel analytical generalization of the transcendental energy equation, group velocity, and effective mass for N-coupled potentials to a probe one-dimensional potential V=V(x) was proposed. Initially, two well-known linear periodic potentials V=V(x) were employed to obtain analytical solutions for rectangular-like and Dirac-delta potentials. Python libraries were used to easily represent the equations for one or two rectangular-like potentials coupled with an arbitrary potential, highlighting the transcendental energy, group velocity, and effective mass. The results showed that the group velocity behavior changed its orientation due to the sign of the potential, whereas the width of the potential V(x) strongly influenced the group velocity behavior. The effective mass was also modified by the potential shapes, and their combinations, both effective mass and group velocity, exhibited similar physical behaviors to those found in ordinary rectangular-like potentials.

A novel split PEC sensor based on magneto–optic nanostructure and photocurrent polarity switching strategy

BackgroundPhotoelectrochemical (PEC) sensors have attracted much attention due to their low cost, simple instrumentation and high sensitivity. However, conventional PEC sensors require layer–by–layer modification of the photoelectrode surface, which has the disadvantages of being time–consuming and unstable. In addition, complex interfering substances in real samples may lead to false–positive or false–negative detection results. It was thought that the above drawbacks could be eliminated by the construction of a polarity inversion PEC sensor. In this work, a magnetically separated PEC sensor was constructed for the detection of Carcinoembryonic antigen (CEA). ResultsDuring the experiment, the construction of the sensor was used for sensitive detection of CEA. In the experimental process, Fe3O4@SiO2@CdS, a semiconductor material with magnetic properties, was chosen as the substrate material, and ZnO/CuO was used as the marker on the DNA2 molecule, and a split magnetic separation PEC sensor was constructed, which was used to realize the sensitive detection of CEA. Eventually, the detection range of the sensor for CEA detection is 1–10000 pg/mL, with the detection limit of 0.34 pg/mL. Additionally, the PEC sensor has the advantages of high speed, high efficiency, high sensitivity, good specificity, and high stability. The sensing platform constructed in this work can also be extended to detect other targets, which provides a new idea for PEC sensing platforms. SignificanceIn this experiment, we developed a split PEC immunosensor based on magneto–optic nanostructure and photocurrent polarity switching strategy. Specifically, the proposed magnetic nanostructure Fe3O4@SiO2@CdS–DNA1 exhibits good paramagnetism and dispersion ability. By magnetic separation process, the PEC signals of opposite polarity can be obtained.

Exploring ZnFeSnO4 double spinel: A thorough investigation of mechanical, dynamical, magneto-electronic properties and lattice thermal conductivity

Double spinel materials ABB'O4 emerge as an innovative class of oxides with promising technological applications. First-principles calculations are employed to explore the fundamental properties of the double spinel ZnFeSnO4. Its elasticity and dynamic stability are investigated using the pseudo-potential plane wave (PP-PW) method, while the full-potential linearized augmented plane wave (FP-LAPW) approach is used to study its electronic and magnetic properties. The results reveal favorable thermodynamic stability, mechanical robustness, and dynamical stability for ZnFeSnO4. Analysis using GGA + U (U = 6 eV) in the FP-LAPW framework predicts half-metallic ferromagnetism, a highly desirable characteristic for spintronic applications due to its potential spin-polarized currents. However, the use of the mBJ functional results in semiconducting character with bandgaps of 1.813 eV, and 1.524 eV for spin-up and spin-down, respectively. Hence, the outcomes of the computations pertaining to the electronic characteristics are contingent upon the selection of the exchange-correlation functional. Furthermore, the calculated low lattice thermal conductivity of ZnFeSnO4 indicates its potential suitability for thermoelectric applications.

Influence of Severe Plastic Deformation on the Magnetic Properties of Sm–Co Permanent Magnets

High pressure torsion (HPT) is presented as a new fabrication route to produce bulk Sm–Co magnets with a strongly refined microstructure down to the nanometer regime. The initial powders, based on the compositions SmCo5, Sm2Co7 and Sm2Co17, are compacted and subsequently deformed by HPT. The microstructural evolution in dependence on the applied deformation parameters is characterized by electron microscopy and the effect of HPT on the phase stability is monitored by synchrotron X‐ray diffraction. An increasing amount of applied strain leads to a stronger reduction in grain size while strain localization counteracts a homogeneous microstructural refinement. The positive effect of elevated deformation temperatures is demonstrated for Sm2Co17, which promotes homogeneous grain refinement, but causes strain‐induced phase transformations at the same time, strongly affecting the magnetic behavior. Superconducting quantum interference device magnetometry is used to characterize the magnetic properties after HPT deformation, which indicates the formation of a magnetic texture depending on the respective phase.

Ratio of 4:1 between ZnGeAs2 and MnAs phases in a single composite and its impact on the structure-driven magnetoresistance

A strong influence of the lattice degree of freedom on magnetoresistance (MR) under high pressure underlies the conception of ‘structure-driven’ magnetoresistance (SDMR). In most magnetic or topological materials, the suppression of MR with increasing pressure is a general trend, while for some magnetic composites the MR enhances and even shows unusual behavior as a consequence of structural transition. Here we investigated the SDMR in the composite material based on the ZnGeAs2 semiconductor matrix and MnAs magnetic inclusions in a phase ratio of 4:1. At ambient pressure, its magnetic and transport properties are governed by MnAs inclusions, i.e. it shows a Curie temperature T C≈ 320 K and metallic-like conductivity. Under high pressure, the low-field room temperature MR undergoes multiple changes in the pressure range up to 7.2 GPa. The structural transition in the ZnGeAs2 matrix has been found at ∼6 GPa, slightly lower than in the pure ZnGeAs2 (6.2 GPa). The huge SDMR as high as 85% at 6.8 GPa and 2.5 kOe, which contains both positive and negative MR components, is accompanied by a pressure-induced metallic-like-to-semiconductor-like transition and the enhanced ferromagnetic order of MnAs inclusions. This observation offers a competing mechanism between the robust extrinsic ferromagnetism and high-pressure electronic properties of ZnGeAs2.

Cycloheptatrienyl-Bridged Triple-Decker Complexes.

The first structurally characterized organometallic multidecker sandwich complexes featuring a cycloheptatrienyl ring (Cht, C7H73-) in the coordination sphere are presented. The synthesis of inverse sandwich complexes of the rare earth elements YIII and ErIII with a bridging cycloheptatrienyl ligand of the type [(thf)(BH4)2LnIII(μ-η7:η7-Cht)LnIII(BH4)(thf)2] is described first. The subsequent introduction of the CotTIPS ligand (CotTIPS = 1,4-(iPr3Si)2C8H62-) into the coordination sphere of the rare earth cations resulted in the isolation of unprecedented triple-decker compounds with the formula [(thf)3K{(η8-CotTIPS)LnIII}2(μ-η7:η7-Cht)], bearing a seven-membered aromatic carbon ring as a middle deck. These compounds are also the first examples of rare earth triple-decker complexes not bridged by a Cot derivative, based on purely carbon-based ligands. The magnetic properties of the respective ErIII congeners were investigated in detail, leading to the observation of antiferromagnetic coupling of the ErIII cations and a blocking temperature of 13.5 K. The conversion of the YIII compound [(thf)3K{(η8-CotTIPS)YIII}2(μ-η7:η7-Cht)] with [YIII(Cot)I(thf)2] resulted in ligand rearrangement and the selective formation of the first triple-decker complex ([(η8-CotTIPSYIII)2(μ-η8:η8-Cot)]) featuring two Cot ligands with different substituents in its coordination sphere.

Mass Transport and Energy Conversion of Magnetic Nanofluids from Nanoparticles’ Movement and Liquid Manipulation

Magnetic nanofluids, also referred to as ferromagnetic particle levitation systems, are materials with highly responsive magnetic properties. Due to their magnetic responsiveness, excellent controllability, favorable thermal characteristics, and versatility, magnetic nanofluids have sparked considerable interest in both industrial manufacturing and scientific research. Magnetic nanofluids have been used and developed in diverse areas such as materials science, physics, chemistry and engineering due to their remarkable characteristics such as rapid magnetic reaction, elastic flow capacities, and tunable thermal and optical properties. This paper provides a full and in-depth introduction to the diverse uses of ferrofluids including material fabrication, fluid droplet manipulation, and biomedicine for the power and machinery sectors. As a result, magnetic nanofluids have shown promising applications and have provided innovative ideas for multidisciplinary research in biology, chemistry, physics and materials science. This paper also presents an overview of the device construction and the latest developments in magnetic-nanofluid-related equipment, as well as possible challenging issues and promising future scenarios.

Low-temperature properties of magnetically frustrated rare-earth zirconatesA2Zr2O7.

Rare-earthA2Zr2O7zirconates have attracted considerable attention of the scientific community for their complex magnetic, electronic and material properties applicable in modern technologies. Light rare-earth members of the series, crystallising in the so-called pyrochlore variant of cubic crystal structure, have been studied in detail. HeavierA2Zr2O7compounds have been investigated mainly from the material properties viewpoint, focussing on their thermal properties and stability at high temperature and pressure. Low-temperature studies were mostly missing until recently. We present the low-temperature magnetic and thermodynamic properties ofA2Zr2O7withA= Y, La, Nd, Eu, Gd, Tb, Dy, Ho, Tm, Yb, and Lu, well covering the whole series,the heavy rare-earth zirconates newly synthesised by high-temperature sintering and melting methods. X-ray diffraction reveals/confirms the ordered pyrochlore structure in light members, the disordered cubic structure of the defect-fluorite type inA2Zr2O7withA= Y, Gd - Yb, and the lower symmetry rhombohedral structure in the end-member Lu2Zr2O7. The specific heat of investigated compounds is dominated by the low-temperature anomaly associated with the magnetic ordering, long-range in light rare-earth zirconates, and short-range in heavier members. Effective magnetic moment in studied compounds, determined by fitting the magnetisation data to the Curie-Weiss formula, is in good agreement with the value of theA3+free ion. The magnetic properties were documented to be strongly influenced by the frustration of magnetic moments, connected to atomic disorder on the geometrically frustrated lattice. The experimental results are discussed in the framework of previous studies onA2Zr2O7zirconates, as well as otherA2B2O7compounds.&#xD.

Research on the stress magnetic coupling effect of a permalloy based on an optimized Jiles Atherton model in magnetic shielding devices

Magnetic shielding devices are extensively used in the measurement of quantum physics, the static magnetic field shielding layer made of permalloy in the magnetic shielding device will work under different stresses. Due to the magnetic properties of permalloy being sensitive to the applied stress, it is necessary to establish a magnetic property model considering stress to accurately evaluate the residual magnetic field in magnetic shielding devices under different stresses. However, the measurement and modeling of the magnetic properties of permalloy under different stresses have not been considered in relevant research. In this paper, the magnetic properties of permalloy under different tensile and compressive stresses were measured, and the optimized Jiles Atherton (JA) model of permalloy considering stress constructed. The parameters of the JA model are extracted by a genetic algorithm,-the particle swarm optimization algorithm, through measurement. Finally, the effectiveness of the model in predicting magnetic properties is validated. The JA optimization model considering stress can improve the calculation accuracy of magnetic shielding devices, which is of great significance for the design and application of magnetic shielding devices.

Ab initio prediction of half-metallic and metallic ferromagnetism in ZnO:(Co,Cr) systems

Doping effects on the electronic and magnetic properties of Zn1−x (Co,Cr) x O systems are investigated within Local Spin Density Approximation and Hubbard U methods. Based on Density Functional Theory the spin-polarization band structures, density of states for investigated systems are calculated. Systematic analysis of the electronic properties shows that TM-doped ZnO has generated new energy levels in the vicinity of Fermi energy level. From first-principle calculations we obtained Cr-ZnO and Co-ZnO systems are metallic and half-metallic ferromagnetic materials, respectively. The obtained results for Cr-doped ZnO 128- and 192-atom supercell systems show magnetic properties with higher Curie temperature than room temperature. There are large local moments, ∼2.9 and ∼4.2 for Co and Cr dopants, respectively. Magnetic moments are related with two electron defects in the supercell structure and unpaired electrons of transition metal. The ferromagnetic and antiferromagnetic phases and the total energy are obtained for x = 2.08%, 3.125%, 4.16%, 6.25%, 8.3%, 12.5%, and 25% impurity concentrations for doped ZnO.

A Sustainable Approach for Enhancing Cationic Dyes Adsorption in Single and Multiple Systems using Novel Nano Ferrites Modified with Walnut Shell

AbstractWalnut shell has been used in various experimental studies for different dyes removal, but it is exciting to study the adsorption behaviour of bio‐waste (walnut shell) in combination with spinel zinc ferrite which resulted in the formation of a novel material having magnetic properties and help in easy separation after the wastewater treatment. Novel magnetic walnut shell zinc ferrite (WSZF) composite has been synthesized and used to remove Malachite Green and Methylene Blue from aqueous solution in single and binary dye systems. Different techniques have been used to characterize the composite such as Fourier Transform Infrared Spectroscopy, X‐Ray Diffraction, Field Emission Scanning Electron Microscopy, Energy Dispersive Spectroscopy, Thermogravimetric Analysis and pHzpc. Adsorption of dyes were studied to see the effect of time, pH, adsorbent dose, dye concentration and temperature. The Lagergren pseudo second order model fitted well among various kinetic models employed. Langmuir adsorption isotherm best fitted with maximum adsorption capacities of 86.20 and 169.5 mg/g in single dye and 23.92 and 18 mg/g respectively in binary dye system for Malachite Green and Methylene Blue. Process was spontaneous and ΔH° were found positive, confirmed endothermic process of adsorption. The composite‘s regeneration capacity was studied for five cycles and at the end of five cycle the efficiency of the material was found to be around 80 % for both single as well as binary dye systems. It is concluded that the chosen WSZF will be the optimum solution for cationic dyes removal.

Enhanced Magnetoimpedance Effect in Co-Based Micron Composite CoFeNiSiB Ribbon Strips Coated by Carbon and FeCoGa Nanofilms for Sensing Applications

Quenched Co-based ribbon strips are widely used in the fields of magnetic amplifier, magnetic head material, magnetic shield, electric reactor, inductance core, sensor core, anti-theft system label, and so on. In this study, Co-based composite CoFeNiSiB ribbon strips with a micron width were fabricated by micro-electro-mechanical systems (MEMS) technology. The carbon and FeCoGa nanofilms were deposited for surface modification. The effect of carbon and FeCoGa nanofilm coatings on the crystal structure, surface morphology, magnetic properties, and magnetoimpedance (MI) effect of composite ribbon strips were systematically investigated. The results show that the surface roughness and coercivity of the composite ribbon strips are minimum at a thickness of the carbon coating of 60 nm. The maximum value of MI effect is 41% at 2 MHz, which is approximately 2.4 times greater than plain ribbon and 1.6 times greater than FeCoGa-coated composite ribbon strip. The addition of a carbon layer provides a conductive path for high frequency currents, which effectively reduces the characteristic frequency of the composite ribbon strip. The FeCoGa coating is able to close the flux path and reduce the coercivity, which, in turn, increases the transverse permeability and improves the MI effect. The findings indicate that a successful combination of carbon layer and magnetostrictive FeCoGa nanofilm layer can improve the MI effect and magnetic field sensitivity of the ribbon strips, demonstrating the potential of the composite strips for local and micro area field sensing applications.

Comparative study between oxide/soft ferrite, oxide/hard ferrite, and soft/hard ferrite nanocomposites: structural, electrical, and magnetic properties

Abstract Three binary nanocomposites (NCs): (0.5NiO/0.5Ni0.5Zn0.5Fe2O4), (0.5NiO/0.5BaFe12O19), and (0.5Ni0.5Zn0.5Fe2O4/0.5BaFe12O19) were prepared using the co-precipitation method followed by the wet ball-milling technique. X-ray diffraction analysis showed the production of NiO and Ni0.5Zn0.5Fe2O single phases, while the α-Fe4 2O3secondary phase appeared in the BaFe12O19 and the 0.5Ni0.5Zn0.5Fe2O4/0.5BaFe12O19 nanocomposite. The transmission electron microscopy investigation and the selected area electron diffraction demonstrated the presence of the nanocomposites' constituent phases. X-ray photoelectron spectroscopy identified the oxidation states found in the prepared samples (Ba2+, Ni2+, Ni3+, Zn2+, Fe3+, and O2-). The bandgap values ( ) of the nanocomposites are in the range between 2.79 and 3.66 eV, which indicates their semiconductor nature. The DC conductivity experiment confirmed the semiconducting nature of all samples, and the activation energies ( ) and ( ) at high and low-temperature regions, respectively, were calculated from the Arrhenius equation. According to the vibrating sample magnetometer, the NCs exhibited ferromagnetic (FM) as showed by the M-H loops. In the oxide/soft ferrite NC, dM/dH curve indicated strong exchange coupling interactions, while the hard and the soft magnetic phases in the oxide/hard ferrite and the soft/hard ferrite NCs were weakly exchanged coupled. Significant uses had been found for each of the three nanocomposites according to their constituent phases and properties.

Structure and dynamics in suspensions of magnetic platelets.

In this research, we employ Brownian dynamics simulations, density functional theory, and mean-field theory to explore the profound influence of shape anisotropy of magnetic nanoplatelets on suspension magnetic response. Each platelet is modelled as an oblate cylinder with a longitudinal point dipole, with an emphasis on strong dipolar interactions conducive to self-assembly. We investigate static structural and magnetic properties, characterising the system through pair distribution function, static structure factor, and cluster-size distribution. The findings demonstrate that shape-specific interactions and clustering lead to significant changes in reorientational relaxation times. Under zero field, distinctive modes in the dynamic magnetic susceptibility identify individual particles and particle clusters. In the presence of an applied field, the characteristic relaxation time of clusters increases, while that of single particles decreases. This research provides insights into the intricate interplay between shape anisotropy, clustering, and magnetic response in platelet suspensions, offering valuable perspectives for recent experimental observations.

Structural, Dielectric, Electrical, and Magnetic Characteristics of Bi0.8Ba0.1Er0.1Fe0.96Cr0.02Mn0.02O3 Nanoparticles

Bi0.8Ba0.1Er0.1Fe0.96Cr0.02Mn0.02O3 (BBEFCMO) multiferroic ceramic was synthesized through the sol-gel route. The impact of incorporating various dopants into both A and B sites of the BiFeO3 was investigated, and structural, Raman, dielectric, electric, and magnetic properties were studied. X-ray diffraction analysis and Raman spectroscopy revealed a rhombohedral structure with the R3c space group for the doped material (BBEFCMO). Dielectric properties were examined across a frequency range of 102–106 Hz. The present multiferroic material exhibits a colossal dielectric constant and minimal dielectric loss tangent, making it suitable for applications in energy storage. Furthermore, the Cole-Cole type of relaxation was deduced from the imaginary part of the modulus for both grain and boundary-grain contributions. Overall, this study indicates that substituting ions in both A and B sites of BiFeO3 significantly enhances its multiferroic properties, as evidenced by dielectric and magnetic measurements.

Comparison of a quasi Newton method using Broyden’s update formula and an adjoint method for determining local magnetic material properties of electrical steel sheets

Purpose Performing accurate numerical simulations of electrical drives, the precise knowledge of the local magnetic material properties is of utmost importance. Due to the various manufacturing steps, e.g. heat treatment or cutting techniques, the magnetic material properties can strongly vary locally, and the assumption of homogenized global material parameters is no longer feasible. This paper aims to present the general methodology and two different solution strategies for determining the local magnetic material properties using reference and simulation data. Design/methodology/approach The general methodology combines methods based on measurement, numerical simulation and solving an inverse problem. Therefore, a sensor-actuator system is used to characterize electrical steel sheets locally. Based on the measurement data and results from the finite element simulation, the inverse problem is solved with two different solution strategies. The first one is a quasi Newton method (QNM) using Broyden's update formula to approximate the Jacobian and the second is an adjoint method. For comparison of both methods regarding convergence and efficiency, an artificial example with a linear material model is considered. Findings The QNM and the adjoint method show similar convergence behavior for two different cutting-edge effects. Furthermore, considering a priori information improved the convergence rate. However, no impact on the stability and the remaining error is observed. Originality/value The presented methodology enables a fast and simple determination of the local magnetic material properties of electrical steel sheets without the need for a large number of samples or special preparation procedures.