Magnetic Force-based Tissue Engineering Research Articles

Magnetic-Based Strategies for Regenerative Medicine and Tissue Engineering.

The fabrication of biological substitutes to repair, replace, or enhance tissue- and organ-level functions is a long-sought goal of tissue engineering (TE). However, the clinical translation of TE is hindered by several challenges, including the lack of suitable mechanical, chemical, and biological properties in one biomaterial, and the inability to generate large, vascularized tissues with a complex structure of native tissues. Over the past decade, a new generation of "smart" materials has revolutionized the conventional medical field, transforming TE into a more accurate and sophisticated concept. At the vanguard of scientific development, magnetic nanoparticles (MNPs) have garnered extensive attention owing to their significant potential in various biomedical applications owing to their inherent properties such as biocompatibility and rapid remote response to magnetic fields. Therefore, to develop functional tissue replacements, magnetic force-based TE (Mag-TE) has emerged as an alternative to conventional TE strategies, allowing for the fabrication and real-time monitoring of tissues engineered in vitro. This review addresses the recent studies on the use of MNPs for TE, emphasizing the in vitro, in vivo, and clinical applications. Future perspectives of Mag-TE in the fields of TE and regenerative medicine are also discussed.

Construction of Hypoxia-Responsive VEGF Gene-Expression System Using Synthetic Biological Approach

Three-dimensional (3D) tissue construction from individual cells is an important process in regenerative medicine to enhance cell functions. In transplantation of tissue-engineered constructs, a limited oxygen/nutrient supply due to insufficient vascular network formation causes cell death. Thus, it is necessary to develop a system for inducing vascular networks into 3D tissue constructs under hypoxic conditions. In our previous study (Ono, A., et al., 2017), we developed a hypoxia-inducible transgene expression system in which a target gene can be expressed in response to hypoxic stress using hypoxia-responsive promoter RTP801 as a trigger, tTA transactivator as an amplifier, and oxygen-dependent degradation sequence as a noise canceler. In this study, to improve oxygen and nutritional limitation within engineered 3D tissue constructs, a hypoxia-responsive gene expression system for vascular endothelial growth factor (VEGF) was introduced into cells. We demonstrated that genetically engineered cells could regulate VEGF expression autonomously in an oxygen concentration-dependent manner. Using the genetically engineered cells, 3D tissue constructs were fabricated using a magnetic force-based tissue engineering technique (Ito, A., et al., 2005). The tissue constructs were transplanted into mice to evaluate the feasibility of the hypoxia-responsive VEGF gene expression system in vivo. The results indicated that the VEGF gene expression system is promising for the induction of vascular networks into 3D tissue constructs.

Miniaturized skeletal muscle tissue fabrication for measuring contractile activity

The contractile function of skeletal muscle is essential for maintaining the vital activity of life. Muscular diseases such as muscular dystrophy severely compromise the quality of life of patients and ultimately lead to death. There is therefore an urgent need to develop therapeutic agents for these diseases. In a previous study, we showed that three-dimensional skeletal muscle tissues fabricated using the magnetic force-based tissue engineering technique exhibited contractile activity, and that drug effects could be evaluated based on the contractile activity of the skeletal muscle tissues. However, the reported method requires a large number of cells and the tissue preparation procedure is complex. It is therefore necessary to improve the tissue preparation method. In this study, a miniature device made of polydimethylsiloxane was used to simplify the production of contracting skeletal muscle tissues applicable to high-throughput screening. The effects of model drugs on the contractile force generation of skeletal muscle tissues prepared from mouse C2C12 myoblast and human induced pluripotent stem cells were evaluated using the miniature muscle device. The results indicated that the muscle device system could provide a useful tool for drug screening.

Scaffold-free, Label-free, and Nozzle-free Magnetic Levitational Bioassembler for Rapid Formative Biofabrication of 3D Tissues and Organs.

Scaffolding is the conceptual framework of conventional tissue engineering. Over the past decade, scaffold-free approaches as a potential alternative to classic scaffold-based methods have emerged, and scaffold-free magnetic levitational tissue engineering (magnetic force-based tissue engineering [Mag-TE]) is a type of this novel tissue engineering strategy. However, Mag-TE is often based on the use of potentially toxic magnetic nanoparticles. Scaffold-free and label-free magnetic levitational bioassembly do not employ magnetic nanoparticles and thus, the potential toxicity of magnetic nanoparticles can be avoided. In this short review, we describe the conceptual foundation of scaffold-free, label-free, and nozzle-free formative biofabrication using magnetic fields as “scaffields.” The design and implementation of “Organ.Aut,” the first commercial magnetic levitational bioassembler, and the potential applications of magnetic bioassembler are discussed as well.

Fabricating Muscle-Neuron Constructs with Improved Contractile Force Generation.

In this study, we fabricated innervated skeletal muscle tissue constructs comprising C2C12 myoblasts and PC12 neural cells using a magnetic force-based tissue engineering technique. We found that the C2C12/PC12 co-culture enhanced neural differentiation of PC12 cells and sarcomere formation of C2C12 myotubes, accompanying with neuromuscular junction formation. The innervated skeletal muscle tissue constructs generated significantly higher contractile forces compared with aneural (C2C12 monoculture) skeletal muscle tissue constructs. These innervated skeletal muscle tissue constructs can be a useful tool for drug testing and biological research for neuromuscular diseases.

Porcine Dental Epithelial Cells Differentiated in a Cell Sheet Constructed by Magnetic Nanotechnology.

Magnetic nanoparticles (MNPs) are widely used in medical examinations, treatments, and basic research, including magnetic resonance imaging, drug delivery systems, and tissue engineering. In this study, MNPs with magnetic force were applied to tissue engineering for dental enamel regeneration. The internalization of MNPs into the odontogenic cells was observed by transmission electron microscopy. A combined cell sheet consisting of dental epithelial cells (DECs) and dental mesenchymal cells (DMCs) (CC sheet) was constructed using magnetic force-based tissue engineering technology. The result of the iron staining indicated that MNPs were distributed ubiquitously over the CC sheet. mRNA expression of enamel differentiation and basement membrane markers was examined in the CC sheet. Immunostaining showed Collagen IV expression at the border region between DEC and DMC layers in the CC sheet. These results revealed that epithelial–mesenchymal interactions between DEC and DMC layers were caused by bringing DECs close to DMCs mechanically by magnetic force. Our study suggests that the microenvironment in the CC sheet might be similar to that during the developmental stage of a tooth bud. In conclusion, a CC sheet employing MNPs could be developed as a novel and unique graft for artificially regenerating dental enamel.

Tissue-engineered magnetic cell sheet patches for advanced strategies in tendon regeneration.

The concept of magnetic force-based tissue engineering may assist the development of innovative solutions to treat tendon (or other tissues) disorders upon remote control of biological processes as cell migration or differentiation. Herein, we originally fabricated magnetic responsive cell sheets (magCSs) with a Tenomodulin positive subpopulation of adipose tissue derived stem cells identified to commit to the tenogenic lineage. To the best of authors knowledge, this is the first time a tendon oriented strategy resorting on magCSsis reported. Moreover, the promising role of tenogenic living constructs fabricated as magnetically responsive ECM-rich patches is highlighted, envisioning the stimulation of endogenous regenerative mechanisms. Altogether, these findings contribute to future stem cell studies and their translation toward tendon therapies.

Magnetic Force-Based Tissue Engineering and Regenerative Medicine

Among other biomedical applications, magnetic nanoparticles and liposomes have a vast field of applications in tissue engineering and regenerative medicine. Magnetic nanoparticles and liposomes, when introduced into cells to be cultured, maneuver the cell's positioning by the appropriate use of magnets to create more complex tissue structures than those that are achieved by conventional culture methods.

Effects of B-Cell Lymphoma 2 Gene Transfer to Myoblast Cells on Skeletal Muscle Tissue Formation Using Magnetic Force-Based Tissue Engineering

Tissue-engineered skeletal muscle should possess a high cell-dense structure with unidirectional cell alignment. However, limited nutrient and/or oxygen supply within the artificial tissue constructs might restrict cell viability and muscular functions. In this study, we genetically modified myoblast cells with the anti-apoptotic B-cell lymphoma 2 (Bcl-2) gene and evaluated their function in artificial skeletal muscle tissue constructs. Magnetite cationic liposomes were used to magnetically label C2C12 myoblast cells for the construction of skeletal muscle bundles by applying a magnetic force. Bcl-2-overexpressing muscle bundles formed highly cell-dense and viable tissue constructs, while muscle bundles without Bcl-2 overexpression exhibited substantial necrosis/apoptosis at the central region of the bundle. Bcl-2-overexpressing muscle bundles contracted in response to electrical pulses and generated a significantly higher physical force. These findings indicate that the incorporation of anti-apoptotic gene-transduced myoblast cells into tissue constructs significantly enhances skeletal muscle formation and function.

Functional Evaluation of Artificial Skeletal Muscle Tissue Constructs Fabricated by a Magnetic Force-Based Tissue Engineering Technique

Skeletal muscle tissue engineering is currently applied in a variety of research fields, including regenerative medicine, drug screening, and bioactuator development, all of which require the fabrication of biomimic and functional skeletal muscle tissues. In the present study, magnetite cationic liposomes were used to magnetically label C2C12 myoblast cells for the construction of three-dimensional artificial skeletal muscle tissues by an applied magnetic force. Skeletal muscle functions, such as biochemical and contractile properties, were evaluated for the artificial tissue constructs. Histological studies revealed that elongated and multinucleated myotubes were observed within the tissue. Expression of muscle-specific markers, such as myogenin, myosin heavy chain and tropomyosin, were detected in the tissue constructs by western blot analysis. Further, creatine kinase activity increased during differentiation. In response to electric pulses, the artificial tissue constructs contracted to generate a physical force (the maximum twitch force, 33.2 μN [1.06 mN/mm2]). Rheobase and chronaxie of the tissue were determined as 4.45 V and 0.72 ms, respectively. These results indicate that the artificial skeletal muscle tissue constructs fabricated in this study were physiologically functional and the data obtained for the evaluation of their functional properties may provide useful information for future skeletal muscle tissue engineering studies.

Magnetic force-based tissue engineering of skeletal muscle

Magnetic force-based tissue engineering of skeletal muscle

Construction of Cardiac Tissue Rings Using a Magnetic Tissue Fabrication Technique

Here we applied a magnetic force-based tissue engineering technique to cardiac tissue fabrication. A mixture of extracellular matrix precursor and cardiomyocytes labeled with magnetic nanoparticles was added into a well containing a central polycarbonate cylinder. With the use of a magnet, the cells were attracted to the bottom of the well and allowed to form a cell layer. During cultivation, the cell layer shrank towards the cylinder, leading to the formation of a ring-shaped tissue that possessed a multilayered cell structure and contractile properties. These results indicate that magnetic tissue fabrication is a promising approach for cardiac tissue engineering.

Fabrication of scaffold-free contractile skeletal muscle tissue using magnetite-incorporated myogenic C2C12 cells

We have fabricated a functional skeletal muscle tissue using magnetite-incorporated myogenic cell line C2C12 and a magnetic field. Magnetite-incorporated C2C12 cells were patterned linearly on a monolayer of fibroblast NIH3T3 cells, using a magnetic field concentrator. After induction of differentiation, the C2C12 cells fused and formed multi-nucleated myotubes. The 3T3 layer became detached in a sheet-like manner after cultivation in differentiation medium for 5-8 days. When two separate collagen films were placed on a culture dish as tendon structures, a cylindrical construct was formed. Histological observation of the fabricated cylindrical tissue revealed the presence of multinucleate cells within it. Immunofluorescence staining of the construct showed the presence of sarcomere structures within the construct. Western blot analysis showed that muscle proteins were expressed in the construct. When the construct was stimulated with electric pulses, it exhibited active tension of approximately 1 microN. These results demonstrate that functional skeletal muscle tissue was formed through magnetic force-based tissue engineering. This is the first report of fabrication of skeletal muscle tissue with active tension-generating capability using magnetic force-based tissue engineering. The scaffold-free skeletal muscle tissue engineering technique presented in this study will be useful for regenerative medicine, drug screening or use as a bio-actuator.

Preparation of artificial skeletal muscle tissues by a magnetic force-based tissue engineering technique

Artificial muscle tissues composed of mouse myoblast C2C12 cells were prepared using a magnetic force-based tissue engineering technique. C2C12 cells labeled with magnetite nanoparticles were seeded into the wells of 24-well ultralow-attachment culture plates. When a magnet was positioned underneath each plate, the cells accumulated evenly on the culture surface and formed multilayered cell sheets. Since the shapes of artificial tissue constructs can be controlled by magnetic force, cellular string-like assemblies were formed by using a linear magnetic field concentrator with a magnet. However, the resulting cellular sheets and strings shrank considerably and did not retain their shapes during additional culture periods for myogenic differentiation. On the other hand, when a silicone plug was positioned at the center of the well during the fabrication of a cell sheet, the cell sheet shrank drastically and formed a ring-like assembly around the plug. A histological examination revealed that the cells in the cellular ring were highly oriented in the direction of the circumference by the tension generated within the structure. Individual cellular rings were hooked around two pins separated by 10 mm, and successfully cultured for 6 d without breakage. After a 6-d culture in differentiation medium, the C2C12 cells differentiated to form myogenin-positive multinucleated myotubes. Highly dense and oriented skeletal muscle tissues were obtained using this technique, suggesting that this procedure may represent a novel strategy for muscle tissue engineering.

Construction of skeletal muscular tissue-like structures by a magnetic force-based tissue engineering technique

Construction of skeletal muscular tissue-like structures by a magnetic force-based tissue engineering technique

Genetically modified angiogenic cell sheets fabricated by magnetic force-based tissue engineering techniques

Genetically modified angiogenic cell sheets fabricated by magnetic force-based tissue engineering techniques

Magnetically Modulated Nanosystems: A Unique Drug-Delivery Platform

Magnetic nanoparticles are attractive targets owing to their unique characteristics that are not shared by bulk materials. Magnetic particles, ranging from nanometer-sized to 1 microm in size, are being used in an increasing number of medical applications. The important properties of magnetic particles for medical applications are nontoxicity, biocompatiblilty, injectability and high-level accumulation in the target tissue or organ. Magnetic nanoparticles modified with organic molecules have been widely used for biotechnological and biomedical applications as their properties can be magnetically controlled by applying an external magnetic field. They offer high potential for numerous biomedical applications, such as cell separation, automated DNA extraction, gene targeting, drug delivery, MRI and hyperthermia. When coated with, for example, an antibody, they can be applied in highly sensitive immunoassays or small substance recoveries. Furthermore, a novel application of magnetic nanoparticles and magnetic forces for tissue engineering, termed 'magnetic force-based tissue engineering' has been proposed. Particular attention had been paid to the preparation methods that allow the synthesis of particles of nearly uniform size and shape.

Human beta defensin-3 engineered keratinocyte sheets constructed by a magnetic force-based tissue engineering technique

A multilayered keratinocyte sheet overexpressing human beta defensin-3 (HBD-3) gene was prepared by the magnetic force-based tissue engineering technique. The cell sheet demonstrated significant antimicrobial activity, indicating that the therapeutic introduction of HBD-3 gene into cell sheets may provide a new gene therapy strategy for infectious diseases.

Fabrication of complex three-dimensional tissue architectures using a magnetic force-based cell patterning technique

We describe the fabrication of three-dimensional tissue constructs using a magnetic force-based tissue engineering technique, in which cellular organization is controlled by magnetic force. Target cells were labeled with magnetite cationic liposomes (MCLs) so that the MCL-labeled cells could be manipulated by applying a magnetic field. Line patterning of human umbilical vein endothelial cells (HUVECs) labeled with MCLs was successfully created on monolayer cells or skin tissues using a magnetic concentrator device. Multilayered cell sheets were also inducible on a culture surface by accumulating MCL-labeled cells under a uniform magnetic force. Based on these results, we attempted to construct a complex multilayered myoblast C2C12 cell sheet. Here, patterned HUVECs were embedded by alternating the processes of magnetic accumulation of C2C12 cells for cell layer formation and magnetic patterning of HUVECs on the cell layers. This technique may be applicable for the fabrication of complex tissue architectures required in tissue engineering.

Construction of 3D Tissue-Like Structure Using Functional Magnetite Nanoparticles

Magnetic nanoparticles for medical applications have been developed by many researchers. Since these nanoparticles have unique magnetic features not present in other materials, they can be applied to special medical techniques. Magnetite cationic liposomes (MCLs), one group of the cationic magnetic particles, can be used as carriers to introduce magnetite nanoparticles into target cells since their positively charged surface interacts with the negatively charged cell surface. Magnetite nanoparticles conjugated with antibodies (antibody-conjugated magnetoliposomes, AMLs) are applicable to introduce magnetite nanoparticles specifically into target cells, even when target cells coexist with other kinds of cells. Since the cells labeled with magnetite nanoparticles could be manipulated using magnets, we applied this technique to tissue engineering and termed it ;magnetic force-based tissue engineering (Mag-TE)'. Both magnetic force and functionalized magnetite nanoparticles were used in a process of tissue engineering: construction of multilayered cell sheet-like structures and tubular structures. Thus, the applications of these functionalized magnetite nanoparticles with their unique features will further improve tissue engineering techniques.