Magic Angle Spinning NMR Research Articles

Cation Distribution and Anion Transport in the La3Ga5-xGe1+xO14+0.5x Langasite Structure.

Exploration of compositional disorder using conventional diffraction-based techniques is challenging for systems containing isoelectronic ions possessing similar coherent neutron scattering lengths. Here, we show that a multinuclear solid-state Nuclear Magnetic Resonance (NMR) approach provides compelling insight into the Ga3+/Ge4+ cation distribution and oxygen anion transport in a family of solid electrolytes with langasite structure and La3Ga5-xGe1+xO14+0.5x composition. Ultrahigh field 71Ga Magic Angle Spinning (MAS) NMR experiments acquired at 35.2 T offer striking resolution enhancement, thereby enabling clear detection of Ga sites in different coordination environments. Three-connected GaO4, four-connected GaO4 and GaO6 polyhedra are probed for the parent La3Ga5GeO14 structure, while one additional spectral feature corresponding to the key (Ga,Ge)2O8 structural unit which forms to accommodate the interstitial oxide ions is detected for the Ge4+-doped La3Ga3.5Ge2.5O14.75 phase. The complex spectral line shapes observed in the MAS NMR spectra are reproduced very accurately by the NMR parameters computed for a symmetry-adapted configurational ensemble that comprehensively models site disorder. This approach further reveals a Ga3+/Ge4+ distribution across all Ga/Ge sites that is controlled by a kinetically governed cation diffusion process. Variable temperature 17O MAS NMR experiments up to 700 °C importantly indicate that the presence of interstitial oxide ions triggers chemical exchange between all oxygen sites, thereby enabling atomic-scale understanding of the anion diffusion mechanism underpinning the transport properties of these materials.

Metabolome in Tibialis and Soleus Muscles in Wild-Type and Pin1 Knockout Mice through High-Resolution Magic Angle Spinning 1H Nuclear Magnetic Resonance Spectroscopy

Skeletal muscles are heterogenous tissues composed of different myofiber types that can be classified as slow oxidative, fast oxidative, and fast glycolytic which are distinguished on the basis of their contractile and metabolic properties. Improving oxidative metabolism in skeletal muscles can prevent metabolic diseases and plays a protective role against muscle wasting in a number of neuromuscular diseases. Therefore, achieving a detailed understanding of the factors that regulate myofiber metabolic properties might provide new therapeutic opportunities for these diseases. Here, we investigated whether peptidyl-prolyl cis-trans isomerase NIMA-interacting 1 (PIN1) is involved in the control of myofiber metabolic behaviors. Indeed, PIN1 controls glucose and lipid metabolism in a number of tissues, and it is also abundant in adult skeletal muscles; however, its role in the control of energy homeostasis in this tissue is still to be defined. To start clarifying this topic, we compared the metabolome of the tibialis anterior muscle (mainly glycolytic) and soleus muscle (oxidative) in wild-type and Pin1 knockout mice with High-Resolution Magic Angle Spinning (HR-MAS) NMR on intact tissues. Our analysis reveals a clear demarcation between the metabolomes in the two types of muscles and allows us to decode a signature able to discriminate the glycolytic versus oxidative muscle phenotype. We also detected some changes in Pin1-depleted muscles that suggest a role for PIN1 in regulating the metabolic phenotype of skeletal muscles.

Ammonothermal Synthesis and Solid-State NMR Study of the Imidonitridosilicate Rb3Si6N5(NH)6.

The imidonitridosilicate Rb3Si6N5(NH)6, being only the second representative of this compound class, was synthesized ammonothermally at 870 K and 230 MPa. Its crystal structure was solved from single-crystal X-ray diffraction data. The imidonitridosilicate crystallizes isotypically with the respective potassium compound in space group P4132 with the lattice parameter a = 10.9422(4) Å forming a three-dimensional imidonitridosilicate tetrahedra network with voids for the rubidium ions. The structure model and the presence of the imide groups were verified by Fourier-Transform infrared (FTIR) and magic-angle spinning (MAS) NMR spectroscopy, using cross polarization 15N{1H} and 29Si{1H} MAS NMR experiments. Rb3Si6N5(NH)6 represents a possible intermediate during the ammonothermal synthesis of nitridosilicates. The characterization of these intermediates improves the understanding of the reaction pathway from ammonothermal solutions to nitrides. Thus, the ammonothermal synthesis is an alternative approach to the well-established high-temperature synthesis leading to the compound class of nitridosilicates.

Searching for Laves Phase Superstructures: Structural and 27Al NMR Spectroscopic Investigations in the Hf-V-Al System.

Laves phases exhibit a plethora of different structures and a multitude of physical properties. Investigations in the ternary system Hf-V-Al led to the discovery of numerous members of the solid solution Hf(V1-xAlx)2, which adopt the hexagonal MgZn2 type (C14) for medium to high amounts of Al (x = 0.2-1) and the cubic MgCu2 type (C15) for small Al amounts (x = 0.05-0.1). While all members exhibit Pauli-paramagnetic behavior due to the absence of localized magnetic moments, the V-rich cubic member Hf(V0.95Al0.05)2 additionally exhibits a superconducting state below TC = 7.6(1) K. All synthesized compounds were characterized by powder X-ray diffraction, and selected samples were furthermore investigated by 27Al solid-state magic-angle spinning (MAS) NMR. HfAl2 exhibits two Al resonances, one rather sharp and one significantly broadened signal, in line with the crystal structure and respective coordination environments. The members of the solid solution exhibit extremely broadened resonances due to the mixing of V and Al on the same crystallographic sites. For nominal Hf(V0.125Al0.875)2, however, two distinct sharp NMR signals were observed. This contrasts with the description of a solid solution. Therefore, single-crystal X-ray studies were conducted, showing that Hf(V0.125Al0.875)2 really is an ordered compound with the sum formula Hf4VAl7 (P3̅m1), which exhibits an, thus far, unknown superstructure of MgZn2.

Pd8(PDip)6: Cubic, Unsaturated, Zerovalent.

Atomically precise nanoclusters hold promise for supramolecular assembly and (opto)electronic- as well as magnetic materials. Herein, this work reports that treating palladium(0) precursors with a triphosphirane affords strongly colored Pd8(PDip)6 that is fully characterized by mass spectrometry, heteronuclear and Cross-Polarization Magic-Angle Spinning (CP-MAS) NMR-, infrared (IR), UV-vis, and X-ray photoelectron (XP) spectroscopies, single-crystal X-Ray diffraction (sc-XRD), mass spectrometry, and cyclovoltammetry (CV). This coordinatively unsaturated 104-electron Pd(0) cluster features a cubic Pd8-core, µ4-capping phosphinidene ligands, and is air-stable. Quantum chemical calculations provide insight to the cluster's electronic structure and suggest 5s/4d orbital mixing as well as minor Pd─P covalency. Trapping experiments reveal that cluster growth proceeds via insertion of Pd(0) into the triphosphirane. The unsaturated cluster senses ethylene and binds isocyanides, which triggers the rearrangement to a tetrahedral structure with a reduced frontier orbital energy gap. These experiments demonstrate facile cluster manipulation and highlight non-destructive cluster rearrangement as is required for supramolecular assembly.

Minimizing usage of silane coupling agent for amine-grafted mesoporous silica CO2 adsorbent

AbstractAmine-grafted adsorbents are promising CO2 adsorbents; however, the excessive addition of an amino silane coupling agent during their synthesis increases their production cost. Thus, using low amounts of silane, we synthesized 3-aminopropyltrimethoxysilane (APTMS)-grafted SBA-15 mesoporous silica and evaluated its CO2 adsorption performance. APTMS-grafted SBA-15 samples were prepared using either impregnation or heating–filtration method (grafting). The obtained samples were characterized by X-ray diffraction spectroscopy, transmission electron microscopy, N2 adsorption/desorption, scanning electron microscopy, magic-angle spinning nuclear magnetic resonance, and elemental analysis. The results revealed that the micropores of SBA-15 were preferentially blocked, and APTMS increasingly occupied the mesopores with increasing amine loading. The CO2-adsorption performance of the adsorbents was measured by thermogravimetric analysis under dry conditions. Both synthesis methods achieved high amine immobilization efficiency (78.3–92.2%), as estimated from the amount of silane coupling agents used in the synthesis and that immobilized on the support. The adsorbents prepared by the two methods adsorbed similar amounts of CO2 of approximately 0.5 mmol g− 1 in 400 ppm CO2 and ~ 1.0 mmol g− 1 in 5 vol% CO2. The adsorption amounts attained in this study are comparable to those of previously reported silane-coupling-agent-modified adsorbents that were prepared with more silane. In contrast, the adsorption rate of the samples was affected by the synthesis method, even with similar amine loadings. Nonetheless, the results revealed that even with a low amount of the silane coupling agent, high-performance amine-grafted CO2 adsorbents could be synthesized.

Quantification of Residual Water in Pharmaceutical Frozen Solutions Via 1H Solid-State NMR

Freezing is essential for the stability of biological drug substances and products, particularly in frozen solution formulations and during the primary drying of lyophilized preparations. However, the unfrozen segment within the frozen matrix can alter solute concentration, ionic strength, and stabilizer crystallization, posing risks of increased biophysical instability and faster chemical degradation. While quantifying the unfrozen water content is important for designing stable biopharmaceuticals, there is a lack of analytical techniques for in situ quantitative measurements. In this study, we introduce a 1H magic angle spinning NMR technique to identify the freezing point (Tice) and quantify mobile water content in frozen biologics, applying this method to analyze the freezing of a commercial high-concentration drug product, Dupixent®. Our results demonstrate that water freezing is influenced by buffer salt properties and formulation composition, including the presence of sugar cryoprotectants and protein concentration. Additionally, the 1H chemical shift can probe pH in the unfrozen phase, potentially predicting the microenvironmental acidity in the frozen state. Our proposed methodology provides fresh insights into the analysis of freeze-concentrated solutions, enhancing our understanding of the stability of frozen and lyophilized biopharmaceuticals.

Novel insights into the amorphous feature of granulated blast furnace slag-supplemented magnesium potassium phosphate cement and its effect on bulk properties

This paper reports the effects of MgO:PO4 (3, 9, and 15) ratio and granulated blast furnace slag dosage (0 wt%, 40 wt%, and 80 wt%) on the phase formation, microstructure, and bulk properties of magnesium potassium phosphate cement (MKPC). Results show that the supplementary of slag and the increment in MgO:PO4 inhibit the formation of K-struvite via X-ray diffraction. While the detections of 29Si magic-angle spinning nuclear magnetic resonance spectroscopy and scanning electron microscope-energy dispersion spectrum further unveil the dissolution of slag and the formation of Q4 amorphous structure in slag supplemented MKPCs. Although the Q4 structure increases the interplanar spacing of K-struvite even leads to its amorphization in MKPCs with high MgO:PO4 (>9), the optimum coexisting of K-struvite and Q4 structure minimizes the porosity and maximizes the compressive strength of MKPCs with MgO:PO4=3 and 40 wt% slag. These results are crucial to developing optimal mixture formulations of MKPC with superior mechanical performance and lower costs associated with their production.

Noncontact In Situ Multidiagnostic NMR/Dielectric Spectroscopy.

Introduction of a dielectric material in a nuclear magnetic resonance (NMR) probe head modifies the frequency response of the probe circuit, a phenomenon revealed by detuning of the probe. For NMR spectroscopy, this detuning is corrected for by tuning and matching the probe head prior to the NMR measurement. The magnitude of the probe detuning, "the dielectric shift", provides direct access to the dielectric properties of the sample, enabling NMR spectrometers to simultaneously perform both dielectric and NMR spectroscopy. By measuring sample dielectric permittivity as a function of frequency, dielectric permittivity spectroscopy can be performed using the new methodology. As a proof of concept, this was evaluated on methanol, ethanol, 1-propanol, 1-pentanol, and 1-octanol using a commercial cross-polarization magic angle spinning (CPMAS) NMR probe head. The results accurately match the literature data collected by standard dielectric spectroscopy techniques. Subsequently, the method was also applied to investigate the solvent-surface interactions of water confined in the micropores of an MFI-type, hydrophilic zeolite with a Si/Al ratio of 11.5. In the micropores, water adsorbs to Bro̷nsted acid sites and defect sites, resulting in a drastically decreased dielectric permittivity of the nanoconfined water. Theoretical background for the new methodology is provided using an effective electric circuit model of a CPMAS probe head with a solenoid coil, describing the detuning resulting from the insertion of dielectric samples in the probe head.

Structural characterisation and reactivity measurement of chemically activated kaolinite

This study examines the structural evaluation of differently activated kaolins for potential use as supplementary cementitious materials (SCM) or as precursor for alternative cementitious materials (ACM). Chemical activation involved amorphizing the kaolinite structure using varying phosphoric acid concentrations, reaction times, and temperatures. Metakaolin obtained via thermal activation served as a comparison. Inductively Coupled Plasma – Optical Emission Spectroscopy (ICP-OES) characterization of the activating solutions revealed phosphoric acid activation leading to dealumination in kaolinite structures, with temperature emerging as the most significant parameter. X-ray diffraction (XRD) confirmed amorphization, attributed to the dealumination process causing Al loss and creating new Si–O–Si interlayered bonds, as monitored by 29Si magic-angle spinning nuclear magnetic resonance (MAS NMR) tracking the change from Q3 to Q4 environments. Furthermore, pozzolanic activity was assessed through Ca(OH)2 consumption and reaction heat release via modified Chapelle and R3 tests, respectively. Kaolinite subjected to intensive chemical activation exhibited high reactivity and increased specific surface area, indicating its potential as a pozzolanic material. Keywords: Kaolin; Chemical activation; Supplementary cementitious materials; Alternative cementitious materials; Dealumination; Pozzolanic reactivity.

Formation of Strong Boron Lewis Acid Sites on Silica.

Bis(1-methyl-ortho-carboranyl)borane (HBMeoCb2) is a very strong Lewis acid that reacts with the isolated silanols present on silica partially dehydroxylated at 700 °C (SiO2-700) to form the well-defined Lewis site MeoCb2B(OSi≡) (1) and H2. 11B{1H} magic-angle spinning (MAS) nuclear magnetic resonance (NMR) data of 1 are consistent with that of a three-coordinate boron site. Contacting 1 with O═PEt3 (triethylphosphine oxide TEPO) and measuring 31P{1H} MAS NMR spectra show that 1 preserves the strong Lewis acidity of HBMeoCb2. Hydride ion affinity and fluoride ion affinity calculations using small molecules analogs of 1 also support the strong Lewis acidity of the boron sites in this material. Reactions of 1 with Cp2Hf(13CH3)2 show that the Lewis sites are capable of abstracting methide groups from Hf to form [Cp2Hf-13CH3][H313C-B(MeoCb2)OSi≡], but with a low overall efficiency.

Chemical composition of soil humin in an organic soil profile

Humin is identified as the most recalcitrant fraction of soil organic matter, but its synthesis and depth variability in the soil profile are unknown. Here, we suggest that carboxyl-rich alicyclic structures (CRAM) and fused aromatic ring structures (FAR) can process significant components of the humin structure. We conducted molecular-level characterization of humin using advanced solid-state nuclear magnetic resonance spectroscopy (SSNMR) experiments and calculated the proportion of FAR and functionalities of CRAM (OCq, –C(CH)n, –CH3) structures. Dipolar dephased (dd) direct polarization magic angle spinning (DPMAS) NMR experiments provided insights into non-protonated carbon and mobile quaternary carbons. We calculated the proportions of non-protonated aromatic carbon and non-polar aliphatic C in the organic layers of the topsoil (Oa), mid-soil (Om), and mineral subsoil (Cg). It was evident that the total aliphatic carbon constitutes a significant proportion of humin, as is the non-protonated C attached to CH3. The 13C dd/DPMAS NMR spectrum of Cg humin clearly showed the formation and preservation of hydrophobic OCq, which is indicative of CRAM structures. CRAM structures could be attached to FAR, which makes the whole structure relatively more hydrophobic, a critical humin functionality in deeper soil. The findings from our research can be successfully utilized in terrestrial carbon sequestration studies to amplify the potential of humin as a recalcitrant carbon reservoir.

Origin of Oxygen in Graphene Oxide Revealed by 17O and 18O Isotopic Labeling.

Wet-chemical oxidation of graphite in a mixture of sulfuric acid with a strong oxidizer, such as potassium permanganate, leads to the formation of graphene oxide with hydroxyl and epoxide groups as the major functional groups. Nevertheless, the reaction mechanism remains unclear and the source of oxygen is a subject of debate. It could theoretically originate from the oxidizer, water, or sulfuric acid. In this study, we employed 18O and 17O labeled reagents to experimentally elucidate the reaction mechanism and, thus, determine the origin of oxo-functional groups. Our findings reveal the multifaceted roles of sulfuric acid, acting as a dispersion medium, a dehydrating agent for potassium permanganate, and an intercalant. Additionally, it significantly acts as a source of oxygen next to manganese oxides. Through 17O solid-state magic-angle spinning (MAS) NMR experiments, we exclude water as a direct reaction partner during oxygenation. With labeling experiments, we conclude on mechanistic insights, which may be exploited for the synthesis of novel graphene derivatives.

Characterization of chemical reactions of silver diammine fluoride and hydroxyapatite under remineralization conditions.

Silver Diammine Fluoride (SDF) is a clinically used topical agent to arrest dental caries. However, the kinetics of its chemical interactions with hydroxyapatite (HA), the principal inorganic component of dental enamel, are not known. The aim was to characterize the step-wise chemical interactions between SDF and HA powder during the clinically important process of remineralization. Two grams of HA powder were immersed in 10 ml acetic acid pH = 4.0 for 2 h to mimic carious demineralization. The powder was then washed and dried for 24 h and mixed with 1.5 ml SDF (Riva Star) for 1 min. The treated powder was then air-dried for 3 min, and 0.2 g was removed and stored in individual tubes each containing 10 ml remineralizing solution. Powder was taken from each tube at various times of exposure to remineralization solution (0 min, 10 min, 2 h, 4 h, 8 h, 24 h, and 10 days), and characterized using Magic Angle Spinning-Nuclear Magnetic Resonance (MAS-NMR) spectroscopy. 19F MAS-NMR spectra showed that calcium fluoride (CaF2) started to form almost immediately after HA was in contact with SDF. After 24 h, the peak shifted to -104.5 ppm suggesting that fluoride substituted hydroxyapatite (FSHA) was formed with time at the expense of CaF2. The 31P MAS-NMR spectra showed a single peak at 2.7 ppm at all time points showing that the only phosphate species present was crystalline apatite. The 35Cl MAS-NMR spectra showed formation of silver chloride (AgCl) at 24 h. It was observed that after the scan, the whitish HA powder changed to black color. In conclusion, this time sequence study showed that under remineralization conditions, SDF initially reacted with HA to form CaF2 which is then transformed to FSHA over time. In the presence of chloride, AgCl is formed which is subsequently photo-reduced to black metallic silver.

Polymorph Identification for Flexible Molecules: Linear Regression Analysis of Experimental and Calculated Solution- and Solid-State NMR Data.

The Δδ regression approach of Blade et al. [ J. Phys. Chem. A 2020, 124(43), 8959-8977] for accurately discriminating between solid forms using a combination of experimental solution- and solid-state NMR data with density functional theory (DFT) calculation is here extended to molecules with multiple conformational degrees of freedom, using furosemide polymorphs as an exemplar. As before, the differences in measured 1H and 13C chemical shifts between solution-state NMR and solid-state magic-angle spinning (MAS) NMR (Δδexperimental) are compared to those determined by gauge-including projector augmented wave (GIPAW) calculations (Δδcalculated) by regression analysis and a t-test, allowing the correct furosemide polymorph to be precisely identified. Monte Carlo random sampling is used to calculate solution-state NMR chemical shifts, reducing computation times by avoiding the need to systematically sample the multidimensional conformational landscape that furosemide occupies in solution. The solvent conditions should be chosen to match the molecule's charge state between the solution and solid states. The Δδ regression approach indicates whether or not correlations between Δδexperimental and Δδcalculated are statistically significant; the approach is differently sensitive to the popular root mean squared error (RMSE) method, being shown to exhibit a much greater dynamic range. An alternative method for estimating solution-state NMR chemical shifts by approximating the measured solution-state dynamic 3D behavior with an ensemble of 54 furosemide crystal structures (polymorphs and cocrystals) from the Cambridge Structural Database (CSD) was also successful in this case, suggesting new avenues for this method that may overcome its current dependency on the prior determination of solution dynamic 3D structures.

Electronic Structures of Radical-Pair-Forming Cofactors in a Heliobacterial Reaction Center.

Photosynthetic reaction centers (RCs) are membrane proteins converting photonic excitations into electric gradients. The heliobacterial RCs (HbRCs) are assumed to be the precursors of all known RCs, making them a compelling subject for investigating structural and functional relationships. A comprehensive picture of the electronic structure of the HbRCs is still missing. In this work, the combination of selective isotope labelling of 13C and 15N nuclei and the utilization of photo-CIDNP MAS NMR (photochemically induced dynamic nuclear polarization magic-angle spinning nuclear magnetic resonance) allows for highly enhanced signals from the radical-pair-forming cofactors. The remarkable magnetic-field dependence of the solid-state photo-CIDNP effect allows for observation of positive signals of the electron donor cofactor at 4.7 T, which is interpreted in terms of a dominant contribution of the differential relaxation (DR) mechanism. Conversely, at 9.4 T, the emissive signals mainly originate from the electron acceptor, due to the strong activation of the three-spin mixing (TSM) mechanism. Consequently, we have utilized two-dimensional homonuclear photo-CIDNP MAS NMR at both 4.7 T and 9.4 T. These findings from experimental investigations are corroborated by calculations based on density functional theory (DFT). This allows us to present a comprehensive investigation of the electronic structure of the cofactors involved in electron transfer (ET).

High-efficiency low-power 13C-15N cross polarization in MAS NMR

Biomolecular solid-state magic angle spinning (MAS) NMR spectroscopy frequently relies on selective 13C-15N magnetization transfers, for various kinds of correlation experiments. Introduced in 1998, spectrally induced filtering in combination with cross polarization (SPECIFIC-CP) is a selective heteronuclear magnetization transfer experiment widely used for biological applications. At MAS frequencies below 20 kHz, commonly used for 13C-detected MAS NMR experiments, SPECIFIC-CP transfer between amide 15N and 13Cα atoms (NCA) is typically performed with radiofrequency (rf) fields set higher than the MAS frequency for both 13C and 15N channels, and high-power 1H decoupling rf field is simultaneously applied. Here, we experimentally explore a broad range of NCA zero-quantum (ZQ) SPECIFIC-CP matching conditions at the MAS frequency of 14 kHz and compare the best high- and low-power matching conditions with respect to selectivity, robustness, and sensitivity at lower 1H decoupling rf fields. We show that low-power NCA SPECIFIC-CP matching condition gives rise to 20% sensitivity enhancement compared to high-power conditions, in 2D NCA spectra of microcrystalline assemblies of HIV-1 CACTD-SP1 protein with inositol hexakis-phosphate (IP6).

Magic-angle spinning NMR structure of Opa60 in lipid bilayers

Here we report the structure of Opa60 in lipid bilayers using proton-detected magic-angle spinning nuclear magnetic resonance (MAS NMR). Preparations including near-native oligosaccharide lipids reveal a consistent picture of a stable transmembrane beta barrel with a minor increase in the structured region as compared with the previously reported detergent structure. The large variable loops known to interact with host proteins could not be detected, confirming their dynamic nature even in a lipid bilayer environment. The structure provides a starting point for investigation of the functional role of Opa60 in gonococcal infection, which is understood to involve interaction with host proteins. At the same time, it demonstrates the recent advances in proton-detected methodology for membrane protein structure determination at atomic resolution by MAS NMR.

Structural Insight into Protective Alumina Coatings for Layered Li-Ion Cathode Materials by Solid-State NMR Spectroscopy.

Layered transition metal oxide cathode materials can exhibit high energy densities in Li-ion batteries, in particular, those with high Ni contents such as LiNiO2. However, the stability of these Ni-rich materials often decreases with increased nickel content, leading to capacity fade and a decrease in the resulting electrochemical performance. Thin alumina coatings have the potential to improve the longevity of LiNiO2 cathodes by providing a protective interface to stabilize the cathode surface. The structures of alumina coatings and the chemistry of the coating-cathode interface are not fully understood and remain the subject of investigation. Greater structural understanding could help to minimize excess coating, maximize conductive pathways, and maintain high capacity and rate capability while improving capacity retention. Here, solid-state nuclear magnetic resonance (NMR) spectroscopy, paired with powder X-ray diffraction and electron microscopy, is used to provide insight into the structures of the Al2O3 coatings on LiNiO2. To do this, we performed a systematic study as a function of coating thickness and used LiCoO2, a diamagnetic model, and the material of interest, LiNiO2. 27Al magic-angle spinning (MAS) NMR spectra acquired for thick 10 wt % coatings on LiCoO2 and LiNiO2 suggest that in both cases, the coatings consist of disordered four- and six-coordinate Al-O environments. However, 27Al MAS NMR spectra acquired for thinner 0.2 wt % coatings on LiCoO2 identify additional phases believed to be LiCo1-xAlxO2 and LiAlO2 at the coating-cathode interface. 6,7Li MAS NMR and T1 measurements suggest that similar mixing takes place near the interface for Al2O3 on LiNiO2. Furthermore, reproducibility studies have been undertaken to investigate the effect of the coating method on the local structure, as well as the role of the substrate.

Ionogels based on protic ionic liquid - lithium salt mixtures

The effect of the addition of lithium nitrate on the liquid range and electrical conductivity of mixtures of a protic ionic liquid, ethylammonium nitrate (EAN) with LiNO3 is reported in this work. Moreover, changes in these properties upon confinement in silica-based matrices are also analysed and related to variations on the microstructure of the mixtures. Our results show that gelation of the mixtures induces amorphous behaviour in all the samples, but no significant changes in the thermal stability are detected. However, important differences on the electrical conductivity of the liquid and gel states of the mixtures were observed. While this magnitude decreases with the addition of salt in the liquid samples for all the temperatures it increases at low concentrations of LiNO3 up to a maximum in the gelled samples with the lowest concentration of added salt (0.1 mol of salt by kg of EAN). High resolution magic angle spinning (HRMAS) NMR shows that the addition of lithium nitrate increases the mobility (both rotational and translational motion) of the cation EA+ within the ionogel and the diffusion of the cation provides evidence of the presence of two different populations of the same molecules experiencing two distinct apparent diffusion coefficients (bi-exponential decay of magnetization in diffusion NMR experiments), while it is mono-exponential in the pure ionic liquid. The Li+ cation is shown to display a higher mobility (both rotational and translational motion) in the ionogel than in the neat ionic liquid. The frustration of the formation of solvation complexes due to the confinement is suspected to be behind this behaviour.